diff --git linux-libre-6.12-gnu/.clippy.toml linux-libre-6.12.44-gnu/.clippy.toml
new file mode 100644
index 000000000000..137f41d203de
--- /dev/null
+++ linux-libre-6.12.44-gnu/.clippy.toml
@@ -0,0 +1,11 @@
+# SPDX-License-Identifier: GPL-2.0
+
+msrv = "1.78.0"
+
+check-private-items = true
+
+disallowed-macros = [
+    # The `clippy::dbg_macro` lint only works with `std::dbg!`, thus we simulate
+    # it here, see: https://github.com/rust-lang/rust-clippy/issues/11303.
+    { path = "kernel::dbg", reason = "the `dbg!` macro is intended as a debugging tool", allow-invalid = true },
+]
diff --git linux-libre-6.12-gnu/.gitignore linux-libre-6.12.44-gnu/.gitignore
index 56972adb5031..a61e4778d011 100644
--- linux-libre-6.12-gnu/.gitignore
+++ linux-libre-6.12.44-gnu/.gitignore
@@ -103,6 +103,7 @@ modules.order
 # We don't want to ignore the following even if they are dot-files
 #
 !.clang-format
+!.clippy.toml
 !.cocciconfig
 !.editorconfig
 !.get_maintainer.ignore
diff --git linux-libre-6.12-gnu/Documentation/ABI/testing/sysfs-bus-pci linux-libre-6.12.44-gnu/Documentation/ABI/testing/sysfs-bus-pci
index 7f63c7e97773..5da6a14dc326 100644
--- linux-libre-6.12-gnu/Documentation/ABI/testing/sysfs-bus-pci
+++ linux-libre-6.12.44-gnu/Documentation/ABI/testing/sysfs-bus-pci
@@ -163,6 +163,17 @@ Description:
 		will be present in sysfs.  Writing 1 to this file
 		will perform reset.
 
+What:		/sys/bus/pci/devices/.../reset_subordinate
+Date:		October 2024
+Contact:	linux-pci@vger.kernel.org
+Description:
+		This is visible only for bridge devices. If you want to reset
+		all devices attached through the subordinate bus of a specific
+		bridge device, writing 1 to this will try to do it.  This will
+		affect all devices attached to the system through this bridge
+		similiar to writing 1 to their individual "reset" file, so use
+		with caution.
+
 What:		/sys/bus/pci/devices/.../vpd
 Date:		February 2008
 Contact:	Ben Hutchings <bwh@kernel.org>
diff --git linux-libre-6.12-gnu/Documentation/ABI/testing/sysfs-devices-system-cpu linux-libre-6.12.44-gnu/Documentation/ABI/testing/sysfs-devices-system-cpu
index 206079d3bd5b..53755b2021ed 100644
--- linux-libre-6.12-gnu/Documentation/ABI/testing/sysfs-devices-system-cpu
+++ linux-libre-6.12.44-gnu/Documentation/ABI/testing/sysfs-devices-system-cpu
@@ -511,6 +511,7 @@ Description:	information about CPUs heterogeneity.
 
 What:		/sys/devices/system/cpu/vulnerabilities
 		/sys/devices/system/cpu/vulnerabilities/gather_data_sampling
+		/sys/devices/system/cpu/vulnerabilities/indirect_target_selection
 		/sys/devices/system/cpu/vulnerabilities/itlb_multihit
 		/sys/devices/system/cpu/vulnerabilities/l1tf
 		/sys/devices/system/cpu/vulnerabilities/mds
@@ -522,6 +523,7 @@ What:		/sys/devices/system/cpu/vulnerabilities
 		/sys/devices/system/cpu/vulnerabilities/spectre_v1
 		/sys/devices/system/cpu/vulnerabilities/spectre_v2
 		/sys/devices/system/cpu/vulnerabilities/srbds
+		/sys/devices/system/cpu/vulnerabilities/tsa
 		/sys/devices/system/cpu/vulnerabilities/tsx_async_abort
 Date:		January 2018
 Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
diff --git linux-libre-6.12-gnu/Documentation/ABI/testing/sysfs-driver-ufs linux-libre-6.12.44-gnu/Documentation/ABI/testing/sysfs-driver-ufs
index 5fa6655aee84..16f17e91ee49 100644
--- linux-libre-6.12-gnu/Documentation/ABI/testing/sysfs-driver-ufs
+++ linux-libre-6.12.44-gnu/Documentation/ABI/testing/sysfs-driver-ufs
@@ -711,7 +711,7 @@ Description:	This file shows the thin provisioning type. This is one of
 
 		The file is read only.
 
-What:		/sys/class/scsi_device/*/device/unit_descriptor/physical_memory_resourse_count
+What:		/sys/class/scsi_device/*/device/unit_descriptor/physical_memory_resource_count
 Date:		February 2018
 Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows the total physical memory resources. This is
diff --git linux-libre-6.12-gnu/Documentation/ABI/testing/sysfs-fs-f2fs linux-libre-6.12.44-gnu/Documentation/ABI/testing/sysfs-fs-f2fs
index fdedf1ea944b..3e1630c70d8a 100644
--- linux-libre-6.12-gnu/Documentation/ABI/testing/sysfs-fs-f2fs
+++ linux-libre-6.12.44-gnu/Documentation/ABI/testing/sysfs-fs-f2fs
@@ -311,10 +311,13 @@ Description:	Do background GC aggressively when set. Set to 0 by default.
 		GC approach and turns SSR mode on.
 		gc urgent low(2): lowers the bar of checking I/O idling in
 		order to process outstanding discard commands and GC a
-		little bit aggressively. uses cost benefit GC approach.
+		little bit aggressively. always uses cost benefit GC approach,
+		and will override age-threshold GC approach if ATGC is enabled
+		at the same time.
 		gc urgent mid(3): does GC forcibly in a period of given
 		gc_urgent_sleep_time and executes a mid level of I/O idling check.
-		uses cost benefit GC approach.
+		always uses cost benefit GC approach, and will override
+		age-threshold GC approach if ATGC is enabled at the same time.
 
 What:		/sys/fs/f2fs/<disk>/gc_urgent_sleep_time
 Date:		August 2017
@@ -819,3 +822,9 @@ Description:	It controls the valid block ratio threshold not to trigger excessiv
 		for zoned deivces. The initial value of it is 95(%). F2FS will stop the
 		background GC thread from intiating GC for sections having valid blocks
 		exceeding the ratio.
+
+What:		/sys/fs/f2fs/<disk>/max_read_extent_count
+Date:		November 2024
+Contact:	"Chao Yu" <chao@kernel.org>
+Description:	It controls max read extent count for per-inode, the value of threshold
+		is 10240 by default.
diff --git linux-libre-6.12-gnu/Documentation/RCU/stallwarn.rst linux-libre-6.12.44-gnu/Documentation/RCU/stallwarn.rst
index ca7b7cd806a1..30080ff6f406 100644
--- linux-libre-6.12-gnu/Documentation/RCU/stallwarn.rst
+++ linux-libre-6.12.44-gnu/Documentation/RCU/stallwarn.rst
@@ -249,7 +249,7 @@ ticks this GP)" indicates that this CPU has not taken any scheduling-clock
 interrupts during the current stalled grace period.
 
 The "idle=" portion of the message prints the dyntick-idle state.
-The hex number before the first "/" is the low-order 12 bits of the
+The hex number before the first "/" is the low-order 16 bits of the
 dynticks counter, which will have an even-numbered value if the CPU
 is in dyntick-idle mode and an odd-numbered value otherwise.  The hex
 number between the two "/"s is the value of the nesting, which will be
diff --git linux-libre-6.12-gnu/Documentation/accel/qaic/aic080.rst linux-libre-6.12.44-gnu/Documentation/accel/qaic/aic080.rst
new file mode 100644
index 000000000000..d563771ea6ce
--- /dev/null
+++ linux-libre-6.12.44-gnu/Documentation/accel/qaic/aic080.rst
@@ -0,0 +1,14 @@
+.. SPDX-License-Identifier: GPL-2.0-only
+
+===============================
+ Qualcomm Cloud AI 80 (AIC080)
+===============================
+
+Overview
+========
+
+The Qualcomm Cloud AI 80/AIC080 family of products are a derivative of AIC100.
+The number of NSPs and clock rates are reduced to fit within resource
+constrained solutions. The PCIe Product ID is 0xa080.
+
+As a derivative product, all AIC100 documentation applies.
diff --git linux-libre-6.12-gnu/Documentation/accel/qaic/index.rst linux-libre-6.12.44-gnu/Documentation/accel/qaic/index.rst
index ad19b88d1a66..967b9dd8bace 100644
--- linux-libre-6.12-gnu/Documentation/accel/qaic/index.rst
+++ linux-libre-6.12.44-gnu/Documentation/accel/qaic/index.rst
@@ -10,4 +10,5 @@ accelerator cards.
 .. toctree::
 
    qaic
+   aic080
    aic100
diff --git linux-libre-6.12-gnu/Documentation/admin-guide/blockdev/zram.rst linux-libre-6.12.44-gnu/Documentation/admin-guide/blockdev/zram.rst
index 678d70d6e1c3..714a5171bfc0 100644
--- linux-libre-6.12-gnu/Documentation/admin-guide/blockdev/zram.rst
+++ linux-libre-6.12.44-gnu/Documentation/admin-guide/blockdev/zram.rst
@@ -47,6 +47,8 @@ The list of possible return codes:
 -ENOMEM	  zram was not able to allocate enough memory to fulfil your
 	  needs.
 -EINVAL	  invalid input has been provided.
+-EAGAIN	  re-try operation later (e.g. when attempting to run recompress
+	  and writeback simultaneously).
 ========  =============================================================
 
 If you use 'echo', the returned value is set by the 'echo' utility,
diff --git linux-libre-6.12-gnu/Documentation/admin-guide/cgroup-v2.rst linux-libre-6.12.44-gnu/Documentation/admin-guide/cgroup-v2.rst
index 6d02168d78be..2cb58daf3089 100644
--- linux-libre-6.12-gnu/Documentation/admin-guide/cgroup-v2.rst
+++ linux-libre-6.12.44-gnu/Documentation/admin-guide/cgroup-v2.rst
@@ -2954,7 +2954,7 @@ following two functions.
 	a queue (device) has been associated with the bio and
 	before submission.
 
-  wbc_account_cgroup_owner(@wbc, @page, @bytes)
+  wbc_account_cgroup_owner(@wbc, @folio, @bytes)
 	Should be called for each data segment being written out.
 	While this function doesn't care exactly when it's called
 	during the writeback session, it's the easiest and most
diff --git linux-libre-6.12-gnu/Documentation/admin-guide/hw-vuln/index.rst linux-libre-6.12.44-gnu/Documentation/admin-guide/hw-vuln/index.rst
index ff0b440ef2dc..d2caa390395e 100644
--- linux-libre-6.12-gnu/Documentation/admin-guide/hw-vuln/index.rst
+++ linux-libre-6.12.44-gnu/Documentation/admin-guide/hw-vuln/index.rst
@@ -22,3 +22,4 @@ are configurable at compile, boot or run time.
    srso
    gather_data_sampling
    reg-file-data-sampling
+   indirect-target-selection
diff --git linux-libre-6.12-gnu/Documentation/admin-guide/hw-vuln/indirect-target-selection.rst linux-libre-6.12.44-gnu/Documentation/admin-guide/hw-vuln/indirect-target-selection.rst
new file mode 100644
index 000000000000..52fed64bfb78
--- /dev/null
+++ linux-libre-6.12.44-gnu/Documentation/admin-guide/hw-vuln/indirect-target-selection.rst
@@ -0,0 +1,166 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Indirect Target Selection (ITS)
+===============================
+
+ITS is a vulnerability in some Intel CPUs that support Enhanced IBRS and were
+released before Alder Lake. ITS may allow an attacker to control the prediction
+of indirect branches and RETs located in the lower half of a cacheline.
+
+ITS is assigned CVE-2024-28956 with a CVSS score of 4.7 (Medium).
+
+Scope of Impact
+---------------
+- **eIBRS Guest/Host Isolation**: Indirect branches in KVM/kernel may still be
+  predicted with unintended target corresponding to a branch in the guest.
+
+- **Intra-Mode BTI**: In-kernel training such as through cBPF or other native
+  gadgets.
+
+- **Indirect Branch Prediction Barrier (IBPB)**: After an IBPB, indirect
+  branches may still be predicted with targets corresponding to direct branches
+  executed prior to the IBPB. /*(DEBLOBBED)*/
+
+Affected CPUs
+-------------
+Below is the list of ITS affected CPUs [#f2]_ [#f3]_:
+
+   ========================  ============  ====================  ===============
+   Common name               Family_Model  eIBRS                 Intra-mode BTI
+                                           Guest/Host Isolation
+   ========================  ============  ====================  ===============
+   SKYLAKE_X (step >= 6)     06_55H        Affected              Affected
+   ICELAKE_X                 06_6AH        Not affected          Affected
+   ICELAKE_D                 06_6CH        Not affected          Affected
+   ICELAKE_L                 06_7EH        Not affected          Affected
+   TIGERLAKE_L               06_8CH        Not affected          Affected
+   TIGERLAKE                 06_8DH        Not affected          Affected
+   KABYLAKE_L (step >= 12)   06_8EH        Affected              Affected
+   KABYLAKE (step >= 13)     06_9EH        Affected              Affected
+   COMETLAKE                 06_A5H        Affected              Affected
+   COMETLAKE_L               06_A6H        Affected              Affected
+   ROCKETLAKE                06_A7H        Not affected          Affected
+   ========================  ============  ====================  ===============
+
+- All affected CPUs enumerate Enhanced IBRS feature.
+- IBPB isolation is affected on all ITS affected CPUs, and need a microcode
+  update for mitigation.
+- None of the affected CPUs enumerate BHI_CTRL which was introduced in Golden
+  Cove (Alder Lake and Sapphire Rapids). This can help guests to determine the
+  host's affected status.
+- Intel Atom CPUs are not affected by ITS.
+
+Mitigation
+----------
+As only the indirect branches and RETs that have their last byte of instruction
+in the lower half of the cacheline are vulnerable to ITS, the basic idea behind
+the mitigation is to not allow indirect branches in the lower half.
+
+This is achieved by relying on existing retpoline support in the kernel, and in
+compilers. ITS-vulnerable retpoline sites are runtime patched to point to newly
+added ITS-safe thunks. These safe thunks consists of indirect branch in the
+second half of the cacheline. Not all retpoline sites are patched to thunks, if
+a retpoline site is evaluated to be ITS-safe, it is replaced with an inline
+indirect branch.
+
+Dynamic thunks
+~~~~~~~~~~~~~~
+From a dynamically allocated pool of safe-thunks, each vulnerable site is
+replaced with a new thunk, such that they get a unique address. This could
+improve the branch prediction accuracy. Also, it is a defense-in-depth measure
+against aliasing.
+
+Note, for simplicity, indirect branches in eBPF programs are always replaced
+with a jump to a static thunk in __x86_indirect_its_thunk_array. If required,
+in future this can be changed to use dynamic thunks.
+
+All vulnerable RETs are replaced with a static thunk, they do not use dynamic
+thunks. This is because RETs get their prediction from RSB mostly that does not
+depend on source address. RETs that underflow RSB may benefit from dynamic
+thunks. But, RETs significantly outnumber indirect branches, and any benefit
+from a unique source address could be outweighed by the increased icache
+footprint and iTLB pressure.
+
+Retpoline
+~~~~~~~~~
+Retpoline sequence also mitigates ITS-unsafe indirect branches. For this
+reason, when retpoline is enabled, ITS mitigation only relocates the RETs to
+safe thunks. Unless user requested the RSB-stuffing mitigation.
+
+RSB Stuffing
+~~~~~~~~~~~~
+RSB-stuffing via Call Depth Tracking is a mitigation for Retbleed RSB-underflow
+attacks. And it also mitigates RETs that are vulnerable to ITS.
+
+Mitigation in guests
+^^^^^^^^^^^^^^^^^^^^
+All guests deploy ITS mitigation by default, irrespective of eIBRS enumeration
+and Family/Model of the guest. This is because eIBRS feature could be hidden
+from a guest. One exception to this is when a guest enumerates BHI_DIS_S, which
+indicates that the guest is running on an unaffected host.
+
+To prevent guests from unnecessarily deploying the mitigation on unaffected
+platforms, Intel has defined ITS_NO bit(62) in MSR IA32_ARCH_CAPABILITIES. When
+a guest sees this bit set, it should not enumerate the ITS bug. Note, this bit
+is not set by any hardware, but is **intended for VMMs to synthesize** it for
+guests as per the host's affected status.
+
+Mitigation options
+^^^^^^^^^^^^^^^^^^
+The ITS mitigation can be controlled using the "indirect_target_selection"
+kernel parameter. The available options are:
+
+   ======== ===================================================================
+   on       (default)  Deploy the "Aligned branch/return thunks" mitigation.
+	    If spectre_v2 mitigation enables retpoline, aligned-thunks are only
+	    deployed for the affected RET instructions. Retpoline mitigates
+	    indirect branches.
+
+   off      Disable ITS mitigation.
+
+   vmexit   Equivalent to "=on" if the CPU is affected by guest/host isolation
+	    part of ITS. Otherwise, mitigation is not deployed. This option is
+	    useful when host userspace is not in the threat model, and only
+	    attacks from guest to host are considered.
+
+   stuff    Deploy RSB-fill mitigation when retpoline is also deployed.
+	    Otherwise, deploy the default mitigation. When retpoline mitigation
+	    is enabled, RSB-stuffing via Call-Depth-Tracking also mitigates
+	    ITS.
+
+   force    Force the ITS bug and deploy the default mitigation.
+   ======== ===================================================================
+
+Sysfs reporting
+---------------
+
+The sysfs file showing ITS mitigation status is:
+
+  /sys/devices/system/cpu/vulnerabilities/indirect_target_selection
+
+Note, microcode mitigation status is not reported in this file.
+
+The possible values in this file are:
+
+.. list-table::
+
+   * - Not affected
+     - The processor is not vulnerable.
+   * - Vulnerable
+     - System is vulnerable and no mitigation has been applied.
+   * - Vulnerable, KVM: Not affected
+     - System is vulnerable to intra-mode BTI, but not affected by eIBRS
+       guest/host isolation.
+   * - Mitigation: Aligned branch/return thunks
+     - The mitigation is enabled, affected indirect branches and RETs are
+       relocated to safe thunks.
+   * - Mitigation: Retpolines, Stuffing RSB
+     - The mitigation is enabled using retpoline and RSB stuffing.
+
+References
+----------
+.. [#f1] /*(DEBLOBBED)*/
+
+.. [#f2] Affected Processors list - https://www.intel.com/content/www/us/en/developer/topic-technology/software-security-guidance/processors-affected-consolidated-product-cpu-model.html
+
+.. [#f3] Affected Processors list (machine readable) - https://github.com/intel/Intel-affected-processor-list
diff --git linux-libre-6.12-gnu/Documentation/admin-guide/hw-vuln/processor_mmio_stale_data.rst linux-libre-6.12.44-gnu/Documentation/admin-guide/hw-vuln/processor_mmio_stale_data.rst
index 1302fd1b55e8..6dba18dbb9ab 100644
--- linux-libre-6.12-gnu/Documentation/admin-guide/hw-vuln/processor_mmio_stale_data.rst
+++ linux-libre-6.12.44-gnu/Documentation/admin-guide/hw-vuln/processor_mmio_stale_data.rst
@@ -157,9 +157,7 @@ This is achieved by using the otherwise unused and obsolete VERW instruction in
 combination with a microcode update. The microcode clears the affected CPU
 buffers when the VERW instruction is executed.
 
-Kernel reuses the MDS function to invoke the buffer clearing:
-
-	mds_clear_cpu_buffers()
+Kernel does the buffer clearing with x86_clear_cpu_buffers().
 
 On MDS affected CPUs, the kernel already invokes CPU buffer clear on
 kernel/userspace, hypervisor/guest and C-state (idle) transitions. No
diff --git linux-libre-6.12-gnu/Documentation/admin-guide/kernel-parameters.txt linux-libre-6.12.44-gnu/Documentation/admin-guide/kernel-parameters.txt
index d401577b5a6a..f402bbaccc8a 100644
--- linux-libre-6.12-gnu/Documentation/admin-guide/kernel-parameters.txt
+++ linux-libre-6.12.44-gnu/Documentation/admin-guide/kernel-parameters.txt
@@ -2149,6 +2149,23 @@
 			different crypto accelerators. This option can be used
 			to achieve best performance for particular HW.
 
+	indirect_target_selection= [X86,Intel] Mitigation control for Indirect
+			Target Selection(ITS) bug in Intel CPUs. Updated
+			microcode is also required for a fix in IBPB.
+
+			on:     Enable mitigation (default).
+			off:    Disable mitigation.
+			force:	Force the ITS bug and deploy default
+				mitigation.
+			vmexit: Only deploy mitigation if CPU is affected by
+				guest/host isolation part of ITS.
+			stuff:	Deploy RSB-fill mitigation when retpoline is
+				also deployed. Otherwise, deploy the default
+				mitigation.
+
+			For details see:
+			Documentation/admin-guide/hw-vuln/indirect-target-selection.rst
+
 	init=		[KNL]
 			Format: <full_path>
 			Run specified binary instead of /sbin/init as init
@@ -3028,6 +3045,8 @@
 			* max_sec_lba48: Set or clear transfer size limit to
 			  65535 sectors.
 
+			* external: Mark port as external (hotplug-capable).
+
 			* [no]lpm: Enable or disable link power management.
 
 			* [no]setxfer: Indicate if transfer speed mode setting
@@ -3508,6 +3527,7 @@
 				expose users to several CPU vulnerabilities.
 				Equivalent to: if nokaslr then kpti=0 [ARM64]
 					       gather_data_sampling=off [X86]
+					       indirect_target_selection=off [X86]
 					       kvm.nx_huge_pages=off [X86]
 					       l1tf=off [X86]
 					       mds=off [X86]
@@ -6241,6 +6261,8 @@
 
 			Selecting 'on' will also enable the mitigation
 			against user space to user space task attacks.
+			Selecting specific mitigation does not force enable
+			user mitigations.
 
 			Selecting 'off' will disable both the kernel and
 			the user space protections.
@@ -6971,6 +6993,19 @@
 			having this key zero'ed is acceptable. E.g. in testing
 			scenarios.
 
+	tsa=		[X86] Control mitigation for Transient Scheduler
+			Attacks on AMD CPUs. Search the following in your
+			favourite search engine for more details:
+
+			"Technical guidance for mitigating transient scheduler
+			attacks".
+
+			off		- disable the mitigation
+			on		- enable the mitigation (default)
+			user		- mitigate only user/kernel transitions
+			vm		- mitigate only guest/host transitions
+
+
 	tsc=		Disable clocksource stability checks for TSC.
 			Format: <string>
 			[x86] reliable: mark tsc clocksource as reliable, this
diff --git linux-libre-6.12-gnu/Documentation/admin-guide/laptops/thinkpad-acpi.rst linux-libre-6.12.44-gnu/Documentation/admin-guide/laptops/thinkpad-acpi.rst
index 7f674a6cfa8a..4ab0fef7d440 100644
--- linux-libre-6.12-gnu/Documentation/admin-guide/laptops/thinkpad-acpi.rst
+++ linux-libre-6.12.44-gnu/Documentation/admin-guide/laptops/thinkpad-acpi.rst
@@ -445,8 +445,10 @@ event	code	Key		Notes
 0x1008	0x07	FN+F8		IBM: toggle screen expand
 				Lenovo: configure UltraNav,
 				or toggle screen expand.
-				On newer platforms (2024+)
-				replaced by 0x131f (see below)
+				On 2024 platforms replaced by
+				0x131f (see below) and on newer
+				platforms (2025 +) keycode is
+				replaced by 0x1401 (see below).
 
 0x1009	0x08	FN+F9		-
 
@@ -506,9 +508,11 @@ event	code	Key		Notes
 
 0x1019	0x18	unknown
 
-0x131f	...	FN+F8	        Platform Mode change.
+0x131f	...	FN+F8		Platform Mode change (2024 systems).
 				Implemented in driver.
 
+0x1401	...	FN+F8		Platform Mode change (2025 + systems).
+				Implemented in driver.
 ...	...	...
 
 0x1020	0x1F	unknown
diff --git linux-libre-6.12-gnu/Documentation/admin-guide/media/building.rst linux-libre-6.12.44-gnu/Documentation/admin-guide/media/building.rst
index a06473429916..7a413ba07f93 100644
--- linux-libre-6.12-gnu/Documentation/admin-guide/media/building.rst
+++ linux-libre-6.12.44-gnu/Documentation/admin-guide/media/building.rst
@@ -15,7 +15,7 @@ Please notice, however, that, if:
 
 you should use the main media development tree ``master`` branch:
 
-    https://git.linuxtv.org/media_tree.git/
+    https://git.linuxtv.org/media.git/
 
 In this case, you may find some useful information at the
 `LinuxTv wiki pages <https://linuxtv.org/wiki>`_:
diff --git linux-libre-6.12-gnu/Documentation/admin-guide/media/saa7134.rst linux-libre-6.12.44-gnu/Documentation/admin-guide/media/saa7134.rst
index 51eae7eb5ab7..18d7cbc897db 100644
--- linux-libre-6.12-gnu/Documentation/admin-guide/media/saa7134.rst
+++ linux-libre-6.12.44-gnu/Documentation/admin-guide/media/saa7134.rst
@@ -67,7 +67,7 @@ Changes / Fixes
 Please mail to linux-media AT vger.kernel.org unified diffs against
 the linux media git tree:
 
-    https://git.linuxtv.org/media_tree.git/
+    https://git.linuxtv.org/media.git/
 
 This is done by committing a patch at a clone of the git tree and
 submitting the patch using ``git send-email``. Don't forget to
diff --git linux-libre-6.12-gnu/Documentation/admin-guide/sysctl/kernel.rst linux-libre-6.12.44-gnu/Documentation/admin-guide/sysctl/kernel.rst
index f8bc1630eba0..fa21cdd610b2 100644
--- linux-libre-6.12-gnu/Documentation/admin-guide/sysctl/kernel.rst
+++ linux-libre-6.12.44-gnu/Documentation/admin-guide/sysctl/kernel.rst
@@ -212,6 +212,17 @@ pid>/``).
 This value defaults to 0.
 
 
+core_sort_vma
+=============
+
+The default coredump writes VMAs in address order. By setting
+``core_sort_vma`` to 1, VMAs will be written from smallest size
+to largest size. This is known to break at least elfutils, but
+can be handy when dealing with very large (and truncated)
+coredumps where the more useful debugging details are included
+in the smaller VMAs.
+
+
 core_uses_pid
 =============
 
diff --git linux-libre-6.12-gnu/Documentation/arch/arm64/booting.rst linux-libre-6.12.44-gnu/Documentation/arch/arm64/booting.rst
index b57776a68f15..15bcd1b4003a 100644
--- linux-libre-6.12-gnu/Documentation/arch/arm64/booting.rst
+++ linux-libre-6.12.44-gnu/Documentation/arch/arm64/booting.rst
@@ -285,6 +285,12 @@ Before jumping into the kernel, the following conditions must be met:
 
     - SCR_EL3.FGTEn (bit 27) must be initialised to 0b1.
 
+  For CPUs with the Fine Grained Traps 2 (FEAT_FGT2) extension present:
+
+  - If EL3 is present and the kernel is entered at EL2:
+
+    - SCR_EL3.FGTEn2 (bit 59) must be initialised to 0b1.
+
   For CPUs with support for HCRX_EL2 (FEAT_HCX) present:
 
   - If EL3 is present and the kernel is entered at EL2:
@@ -379,6 +385,22 @@ Before jumping into the kernel, the following conditions must be met:
 
     - SMCR_EL2.EZT0 (bit 30) must be initialised to 0b1.
 
+  For CPUs with the Performance Monitors Extension (FEAT_PMUv3p9):
+
+ - If EL3 is present:
+
+    - MDCR_EL3.EnPM2 (bit 7) must be initialised to 0b1.
+
+ - If the kernel is entered at EL1 and EL2 is present:
+
+    - HDFGRTR2_EL2.nPMICNTR_EL0 (bit 2) must be initialised to 0b1.
+    - HDFGRTR2_EL2.nPMICFILTR_EL0 (bit 3) must be initialised to 0b1.
+    - HDFGRTR2_EL2.nPMUACR_EL1 (bit 4) must be initialised to 0b1.
+
+    - HDFGWTR2_EL2.nPMICNTR_EL0 (bit 2) must be initialised to 0b1.
+    - HDFGWTR2_EL2.nPMICFILTR_EL0 (bit 3) must be initialised to 0b1.
+    - HDFGWTR2_EL2.nPMUACR_EL1 (bit 4) must be initialised to 0b1.
+
   For CPUs with Memory Copy and Memory Set instructions (FEAT_MOPS):
 
   - If the kernel is entered at EL1 and EL2 is present:
diff --git linux-libre-6.12-gnu/Documentation/arch/arm64/elf_hwcaps.rst linux-libre-6.12.44-gnu/Documentation/arch/arm64/elf_hwcaps.rst
index 694f67fa07d1..ab556426c7ac 100644
--- linux-libre-6.12-gnu/Documentation/arch/arm64/elf_hwcaps.rst
+++ linux-libre-6.12.44-gnu/Documentation/arch/arm64/elf_hwcaps.rst
@@ -174,22 +174,28 @@ HWCAP2_DCPODP
     Functionality implied by ID_AA64ISAR1_EL1.DPB == 0b0010.
 
 HWCAP2_SVE2
-    Functionality implied by ID_AA64ZFR0_EL1.SVEver == 0b0001.
+    Functionality implied by ID_AA64PFR0_EL1.SVE == 0b0001 and
+    ID_AA64ZFR0_EL1.SVEver == 0b0001.
 
 HWCAP2_SVEAES
-    Functionality implied by ID_AA64ZFR0_EL1.AES == 0b0001.
+    Functionality implied by ID_AA64PFR0_EL1.SVE == 0b0001 and
+    ID_AA64ZFR0_EL1.AES == 0b0001.
 
 HWCAP2_SVEPMULL
-    Functionality implied by ID_AA64ZFR0_EL1.AES == 0b0010.
+    Functionality implied by ID_AA64PFR0_EL1.SVE == 0b0001 and
+    ID_AA64ZFR0_EL1.AES == 0b0010.
 
 HWCAP2_SVEBITPERM
-    Functionality implied by ID_AA64ZFR0_EL1.BitPerm == 0b0001.
+    Functionality implied by ID_AA64PFR0_EL1.SVE == 0b0001 and
+    ID_AA64ZFR0_EL1.BitPerm == 0b0001.
 
 HWCAP2_SVESHA3
-    Functionality implied by ID_AA64ZFR0_EL1.SHA3 == 0b0001.
+    Functionality implied by ID_AA64PFR0_EL1.SVE == 0b0001 and
+    ID_AA64ZFR0_EL1.SHA3 == 0b0001.
 
 HWCAP2_SVESM4
-    Functionality implied by ID_AA64ZFR0_EL1.SM4 == 0b0001.
+    Functionality implied by ID_AA64PFR0_EL1.SVE == 0b0001 and
+    ID_AA64ZFR0_EL1.SM4 == 0b0001.
 
 HWCAP2_FLAGM2
     Functionality implied by ID_AA64ISAR0_EL1.TS == 0b0010.
@@ -198,16 +204,20 @@ HWCAP2_FRINT
     Functionality implied by ID_AA64ISAR1_EL1.FRINTTS == 0b0001.
 
 HWCAP2_SVEI8MM
-    Functionality implied by ID_AA64ZFR0_EL1.I8MM == 0b0001.
+    Functionality implied by ID_AA64PFR0_EL1.SVE == 0b0001 and
+    ID_AA64ZFR0_EL1.I8MM == 0b0001.
 
 HWCAP2_SVEF32MM
-    Functionality implied by ID_AA64ZFR0_EL1.F32MM == 0b0001.
+    Functionality implied by ID_AA64PFR0_EL1.SVE == 0b0001 and
+    ID_AA64ZFR0_EL1.F32MM == 0b0001.
 
 HWCAP2_SVEF64MM
-    Functionality implied by ID_AA64ZFR0_EL1.F64MM == 0b0001.
+    Functionality implied by ID_AA64PFR0_EL1.SVE == 0b0001 and
+    ID_AA64ZFR0_EL1.F64MM == 0b0001.
 
 HWCAP2_SVEBF16
-    Functionality implied by ID_AA64ZFR0_EL1.BF16 == 0b0001.
+    Functionality implied by ID_AA64PFR0_EL1.SVE == 0b0001 and
+    ID_AA64ZFR0_EL1.BF16 == 0b0001.
 
 HWCAP2_I8MM
     Functionality implied by ID_AA64ISAR1_EL1.I8MM == 0b0001.
@@ -273,7 +283,8 @@ HWCAP2_EBF16
     Functionality implied by ID_AA64ISAR1_EL1.BF16 == 0b0010.
 
 HWCAP2_SVE_EBF16
-    Functionality implied by ID_AA64ZFR0_EL1.BF16 == 0b0010.
+    Functionality implied by ID_AA64PFR0_EL1.SVE == 0b0001 and
+    ID_AA64ZFR0_EL1.BF16 == 0b0010.
 
 HWCAP2_CSSC
     Functionality implied by ID_AA64ISAR2_EL1.CSSC == 0b0001.
@@ -282,7 +293,8 @@ HWCAP2_RPRFM
     Functionality implied by ID_AA64ISAR2_EL1.RPRFM == 0b0001.
 
 HWCAP2_SVE2P1
-    Functionality implied by ID_AA64ZFR0_EL1.SVEver == 0b0010.
+    Functionality implied by ID_AA64PFR0_EL1.SVE == 0b0001 and
+    ID_AA64ZFR0_EL1.SVEver == 0b0010.
 
 HWCAP2_SME2
     Functionality implied by ID_AA64SMFR0_EL1.SMEver == 0b0001.
@@ -309,7 +321,8 @@ HWCAP2_HBC
     Functionality implied by ID_AA64ISAR2_EL1.BC == 0b0001.
 
 HWCAP2_SVE_B16B16
-    Functionality implied by ID_AA64ZFR0_EL1.B16B16 == 0b0001.
+    Functionality implied by ID_AA64PFR0_EL1.SVE == 0b0001 and
+    ID_AA64ZFR0_EL1.B16B16 == 0b0001.
 
 HWCAP2_LRCPC3
     Functionality implied by ID_AA64ISAR1_EL1.LRCPC == 0b0011.
diff --git linux-libre-6.12-gnu/Documentation/arch/arm64/silicon-errata.rst linux-libre-6.12.44-gnu/Documentation/arch/arm64/silicon-errata.rst
index 65bfab1b1861..b42fea07c5ce 100644
--- linux-libre-6.12-gnu/Documentation/arch/arm64/silicon-errata.rst
+++ linux-libre-6.12.44-gnu/Documentation/arch/arm64/silicon-errata.rst
@@ -255,8 +255,11 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | Hisilicon      | Hip08 SMMU PMCG | #162001800      | N/A                         |
 +----------------+-----------------+-----------------+-----------------------------+
-| Hisilicon      | Hip{08,09,10,10C| #162001900      | N/A                         |
-|                | ,11} SMMU PMCG  |                 |                             |
+| Hisilicon      | Hip{08,09,09A,10| #162001900      | N/A                         |
+|                | ,10C,11}        |                 |                             |
+|                | SMMU PMCG       |                 |                             |
++----------------+-----------------+-----------------+-----------------------------+
+| Hisilicon      | Hip09           | #162100801      | HISILICON_ERRATUM_162100801 |
 +----------------+-----------------+-----------------+-----------------------------+
 +----------------+-----------------+-----------------+-----------------------------+
 | Qualcomm Tech. | Kryo/Falkor v1  | E1003           | QCOM_FALKOR_ERRATUM_1003    |
diff --git linux-libre-6.12-gnu/Documentation/arch/x86/boot.rst linux-libre-6.12.44-gnu/Documentation/arch/x86/boot.rst
index 4fd492cb4970..ad2d8ddad27f 100644
--- linux-libre-6.12-gnu/Documentation/arch/x86/boot.rst
+++ linux-libre-6.12.44-gnu/Documentation/arch/x86/boot.rst
@@ -896,10 +896,19 @@ Offset/size:	0x260/4
 
   The kernel runtime start address is determined by the following algorithm::
 
-	if (relocatable_kernel)
-	runtime_start = align_up(load_address, kernel_alignment)
-	else
-	runtime_start = pref_address
+   	if (relocatable_kernel) {
+   		if (load_address < pref_address)
+   			load_address = pref_address;
+   		runtime_start = align_up(load_address, kernel_alignment);
+   	} else {
+   		runtime_start = pref_address;
+   	}
+
+Hence the necessary memory window location and size can be estimated by
+a boot loader as::
+
+   	memory_window_start = runtime_start;
+   	memory_window_size = init_size;
 
 ============	===============
 Field name:	handover_offset
diff --git linux-libre-6.12-gnu/Documentation/arch/x86/mds.rst linux-libre-6.12.44-gnu/Documentation/arch/x86/mds.rst
index 5a2e6c0ef04a..3518671e1a85 100644
--- linux-libre-6.12-gnu/Documentation/arch/x86/mds.rst
+++ linux-libre-6.12.44-gnu/Documentation/arch/x86/mds.rst
@@ -93,7 +93,7 @@ enters a C-state.
 
 The kernel provides a function to invoke the buffer clearing:
 
-    mds_clear_cpu_buffers()
+    x86_clear_cpu_buffers()
 
 Also macro CLEAR_CPU_BUFFERS can be used in ASM late in exit-to-user path.
 Other than CFLAGS.ZF, this macro doesn't clobber any registers.
@@ -185,9 +185,9 @@ Mitigation points
    idle clearing would be a window dressing exercise and is therefore not
    activated.
 
-   The invocation is controlled by the static key mds_idle_clear which is
-   switched depending on the chosen mitigation mode and the SMT state of
-   the system.
+   The invocation is controlled by the static key cpu_buf_idle_clear which is
+   switched depending on the chosen mitigation mode and the SMT state of the
+   system.
 
    The buffer clear is only invoked before entering the C-State to prevent
    that stale data from the idling CPU from spilling to the Hyper-Thread
diff --git linux-libre-6.12-gnu/Documentation/bpf/bpf_devel_QA.rst linux-libre-6.12.44-gnu/Documentation/bpf/bpf_devel_QA.rst
index de27e1620821..0acb4c9b8d90 100644
--- linux-libre-6.12-gnu/Documentation/bpf/bpf_devel_QA.rst
+++ linux-libre-6.12.44-gnu/Documentation/bpf/bpf_devel_QA.rst
@@ -382,6 +382,14 @@ In case of new BPF instructions, once the changes have been accepted
 into the Linux kernel, please implement support into LLVM's BPF back
 end. See LLVM_ section below for further information.
 
+Q: What "BPF_INTERNAL" symbol namespace is for?
+-----------------------------------------------
+A: Symbols exported as BPF_INTERNAL can only be used by BPF infrastructure
+like preload kernel modules with light skeleton. Most symbols outside
+of BPF_INTERNAL are not expected to be used by code outside of BPF either.
+Symbols may lack the designation because they predate the namespaces,
+or due to an oversight.
+
 Stable submission
 =================
 
diff --git linux-libre-6.12-gnu/Documentation/bpf/map_hash.rst linux-libre-6.12.44-gnu/Documentation/bpf/map_hash.rst
index d2343952f2cb..8606bf958a8c 100644
--- linux-libre-6.12-gnu/Documentation/bpf/map_hash.rst
+++ linux-libre-6.12.44-gnu/Documentation/bpf/map_hash.rst
@@ -233,10 +233,16 @@ attempts in order to enforce the LRU property which have increasing impacts on
 other CPUs involved in the following operation attempts:
 
 - Attempt to use CPU-local state to batch operations
-- Attempt to fetch free nodes from global lists
+- Attempt to fetch ``target_free`` free nodes from global lists
 - Attempt to pull any node from a global list and remove it from the hashmap
 - Attempt to pull any node from any CPU's list and remove it from the hashmap
 
+The number of nodes to borrow from the global list in a batch, ``target_free``,
+depends on the size of the map. Larger batch size reduces lock contention, but
+may also exhaust the global structure. The value is computed at map init to
+avoid exhaustion, by limiting aggregate reservation by all CPUs to half the map
+size. With a minimum of a single element and maximum budget of 128 at a time.
+
 This algorithm is described visually in the following diagram. See the
 description in commit 3a08c2fd7634 ("bpf: LRU List") for a full explanation of
 the corresponding operations:
diff --git linux-libre-6.12-gnu/Documentation/bpf/map_lru_hash_update.dot linux-libre-6.12.44-gnu/Documentation/bpf/map_lru_hash_update.dot
index a0fee349d29c..ab10058f5b79 100644
--- linux-libre-6.12-gnu/Documentation/bpf/map_lru_hash_update.dot
+++ linux-libre-6.12.44-gnu/Documentation/bpf/map_lru_hash_update.dot
@@ -35,18 +35,18 @@ digraph {
   fn_bpf_lru_list_pop_free_to_local [shape=rectangle,fillcolor=2,
     label="Flush local pending,
     Rotate Global list, move
-    LOCAL_FREE_TARGET
+    target_free
     from global -> local"]
   // Also corresponds to:
   // fn__local_list_flush()
   // fn_bpf_lru_list_rotate()
   fn___bpf_lru_node_move_to_free[shape=diamond,fillcolor=2,
-    label="Able to free\nLOCAL_FREE_TARGET\nnodes?"]
+    label="Able to free\ntarget_free\nnodes?"]
 
   fn___bpf_lru_list_shrink_inactive [shape=rectangle,fillcolor=3,
     label="Shrink inactive list
       up to remaining
-      LOCAL_FREE_TARGET
+      target_free
       (global LRU -> local)"]
   fn___bpf_lru_list_shrink [shape=diamond,fillcolor=2,
     label="> 0 entries in\nlocal free list?"]
diff --git linux-libre-6.12-gnu/Documentation/core-api/symbol-namespaces.rst linux-libre-6.12.44-gnu/Documentation/core-api/symbol-namespaces.rst
index 12e4aecdae94..cca94469fa41 100644
--- linux-libre-6.12-gnu/Documentation/core-api/symbol-namespaces.rst
+++ linux-libre-6.12.44-gnu/Documentation/core-api/symbol-namespaces.rst
@@ -28,6 +28,9 @@ kernel. As of today, modules that make use of symbols exported into namespaces,
 are required to import the namespace. Otherwise the kernel will, depending on
 its configuration, reject loading the module or warn about a missing import.
 
+Additionally, it is possible to put symbols into a module namespace, strictly
+limiting which modules are allowed to use these symbols.
+
 2. How to define Symbol Namespaces
 ==================================
 
@@ -68,7 +71,7 @@ is to define the default namespace in the ``Makefile`` of the subsystem. E.g. to
 export all symbols defined in usb-common into the namespace USB_COMMON, add a
 line like this to drivers/usb/common/Makefile::
 
-	ccflags-y += -DDEFAULT_SYMBOL_NAMESPACE=USB_COMMON
+	ccflags-y += -DDEFAULT_SYMBOL_NAMESPACE='"USB_COMMON"'
 
 That will affect all EXPORT_SYMBOL() and EXPORT_SYMBOL_GPL() statements. A
 symbol exported with EXPORT_SYMBOL_NS() while this definition is present, will
@@ -79,11 +82,27 @@ A second option to define the default namespace is directly in the compilation
 unit as preprocessor statement. The above example would then read::
 
 	#undef  DEFAULT_SYMBOL_NAMESPACE
-	#define DEFAULT_SYMBOL_NAMESPACE USB_COMMON
+	#define DEFAULT_SYMBOL_NAMESPACE "USB_COMMON"
 
 within the corresponding compilation unit before any EXPORT_SYMBOL macro is
 used.
 
+2.3 Using the EXPORT_SYMBOL_GPL_FOR_MODULES() macro
+===================================================
+
+Symbols exported using this macro are put into a module namespace. This
+namespace cannot be imported.
+
+The macro takes a comma separated list of module names, allowing only those
+modules to access this symbol. Simple tail-globs are supported.
+
+For example:
+
+  EXPORT_SYMBOL_GPL_FOR_MODULES(preempt_notifier_inc, "kvm,kvm-*")
+
+will limit usage of this symbol to modules whoes name matches the given
+patterns.
+
 3. How to use Symbols exported in Namespaces
 ============================================
 
@@ -155,3 +174,6 @@ in-tree modules::
 You can also run nsdeps for external module builds. A typical usage is::
 
 	$ make -C <path_to_kernel_src> M=$PWD nsdeps
+
+Note: it will happily generate an import statement for the module namespace;
+which will not work and generates build and runtime failures.
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml linux-libre-6.12.44-gnu/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml
index 76163abed655..5ed40f21b8eb 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml
+++ linux-libre-6.12.44-gnu/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml
@@ -55,8 +55,7 @@ properties:
       - const: arm,primecell
 
   reg:
-    minItems: 1
-    maxItems: 2
+    maxItems: 1
 
   clocks:
     maxItems: 1
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml linux-libre-6.12.44-gnu/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml
index 8eec07d9d454..07d21a3617f5 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml
+++ linux-libre-6.12.44-gnu/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml
@@ -41,8 +41,7 @@ properties:
       - const: arm,primecell
 
   reg:
-    minItems: 1
-    maxItems: 2
+    maxItems: 1
 
   qcom,dsb-element-bits:
     description:
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/cache/qcom,llcc.yaml linux-libre-6.12.44-gnu/Documentation/devicetree/bindings/cache/qcom,llcc.yaml
index 68ea5f70b75f..ee7edc6f60e2 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/cache/qcom,llcc.yaml
+++ linux-libre-6.12.44-gnu/Documentation/devicetree/bindings/cache/qcom,llcc.yaml
@@ -39,11 +39,11 @@ properties:
 
   reg:
     minItems: 2
-    maxItems: 9
+    maxItems: 10
 
   reg-names:
     minItems: 2
-    maxItems: 9
+    maxItems: 10
 
   interrupts:
     maxItems: 1
@@ -134,6 +134,36 @@ allOf:
               - qcom,qdu1000-llcc
               - qcom,sc8180x-llcc
               - qcom,sc8280xp-llcc
+    then:
+      properties:
+        reg:
+          items:
+            - description: LLCC0 base register region
+            - description: LLCC1 base register region
+            - description: LLCC2 base register region
+            - description: LLCC3 base register region
+            - description: LLCC4 base register region
+            - description: LLCC5 base register region
+            - description: LLCC6 base register region
+            - description: LLCC7 base register region
+            - description: LLCC broadcast base register region
+        reg-names:
+          items:
+            - const: llcc0_base
+            - const: llcc1_base
+            - const: llcc2_base
+            - const: llcc3_base
+            - const: llcc4_base
+            - const: llcc5_base
+            - const: llcc6_base
+            - const: llcc7_base
+            - const: llcc_broadcast_base
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
               - qcom,x1e80100-llcc
     then:
       properties:
@@ -148,6 +178,7 @@ allOf:
             - description: LLCC6 base register region
             - description: LLCC7 base register region
             - description: LLCC broadcast base register region
+            - description: LLCC broadcast AND register region
         reg-names:
           items:
             - const: llcc0_base
@@ -159,6 +190,7 @@ allOf:
             - const: llcc6_base
             - const: llcc7_base
             - const: llcc_broadcast_base
+            - const: llcc_broadcast_and_base
 
   - if:
       properties:
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/clock/adi,axi-clkgen.yaml linux-libre-6.12.44-gnu/Documentation/devicetree/bindings/clock/adi,axi-clkgen.yaml
index 5e942bccf277..2b2041818a0a 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/clock/adi,axi-clkgen.yaml
+++ linux-libre-6.12.44-gnu/Documentation/devicetree/bindings/clock/adi,axi-clkgen.yaml
@@ -26,9 +26,21 @@ properties:
     description:
       Specifies the reference clock(s) from which the output frequency is
       derived. This must either reference one clock if only the first clock
-      input is connected or two if both clock inputs are connected.
-    minItems: 1
-    maxItems: 2
+      input is connected or two if both clock inputs are connected. The last
+      clock is the AXI bus clock that needs to be enabled so we can access the
+      core registers.
+    minItems: 2
+    maxItems: 3
+
+  clock-names:
+    oneOf:
+      - items:
+          - const: clkin1
+          - const: s_axi_aclk
+      - items:
+          - const: clkin1
+          - const: clkin2
+          - const: s_axi_aclk
 
   '#clock-cells':
     const: 0
@@ -40,6 +52,7 @@ required:
   - compatible
   - reg
   - clocks
+  - clock-names
   - '#clock-cells'
 
 additionalProperties: false
@@ -50,5 +63,6 @@ examples:
       compatible = "adi,axi-clkgen-2.00.a";
       #clock-cells = <0>;
       reg = <0xff000000 0x1000>;
-      clocks = <&osc 1>;
+      clocks = <&osc 1>, <&clkc 15>;
+      clock-names = "clkin1", "s_axi_aclk";
     };
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/clock/imx93-clock.yaml linux-libre-6.12.44-gnu/Documentation/devicetree/bindings/clock/imx93-clock.yaml
index ccb53c6b96c1..98c0800732ef 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/clock/imx93-clock.yaml
+++ linux-libre-6.12.44-gnu/Documentation/devicetree/bindings/clock/imx93-clock.yaml
@@ -16,6 +16,7 @@ description: |
 properties:
   compatible:
     enum:
+      - fsl,imx91-ccm
       - fsl,imx93-ccm
 
   reg:
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/display/bridge/adi,adv7533.yaml linux-libre-6.12.44-gnu/Documentation/devicetree/bindings/display/bridge/adi,adv7533.yaml
index df20a3c9c744..ec89115c74e4 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/display/bridge/adi,adv7533.yaml
+++ linux-libre-6.12.44-gnu/Documentation/devicetree/bindings/display/bridge/adi,adv7533.yaml
@@ -90,7 +90,7 @@ properties:
   adi,dsi-lanes:
     description: Number of DSI data lanes connected to the DSI host.
     $ref: /schemas/types.yaml#/definitions/uint32
-    enum: [ 1, 2, 3, 4 ]
+    enum: [ 2, 3, 4 ]
 
   "#sound-dai-cells":
     const: 0
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dpu.yaml linux-libre-6.12.44-gnu/Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dpu.yaml
index 4ebea60b8c5b..8c52fa0ea5f8 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dpu.yaml
+++ linux-libre-6.12.44-gnu/Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dpu.yaml
@@ -25,7 +25,7 @@ properties:
     maxItems: 1
 
   clocks:
-    minItems: 2
+    maxItems: 2
 
   clock-names:
     items:
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dsi-host.yaml linux-libre-6.12.44-gnu/Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dsi-host.yaml
index bc5594d18643..300bf2252c3e 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dsi-host.yaml
+++ linux-libre-6.12.44-gnu/Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dsi-host.yaml
@@ -20,7 +20,7 @@ properties:
     maxItems: 2
 
   clocks:
-    minItems: 1
+    maxItems: 1
 
   clock-names:
     items:
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.yaml linux-libre-6.12.44-gnu/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.yaml
index b57ae6963e62..6b6f6762d122 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.yaml
+++ linux-libre-6.12.44-gnu/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.yaml
@@ -97,7 +97,10 @@ properties:
 
   resets:
     items:
-      - description: module reset
+      - description:
+          Module reset. This property is optional for controllers in Tegra194,
+          Tegra234 etc where an internal software reset is available as an
+          alternative.
 
   reset-names:
     items:
@@ -116,6 +119,13 @@ properties:
       - const: rx
       - const: tx
 
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
 allOf:
   - $ref: /schemas/i2c/i2c-controller.yaml
   - if:
@@ -169,6 +179,18 @@ allOf:
       properties:
         power-domains: false
 
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - nvidia,tegra194-i2c
+    then:
+      required:
+        - resets
+        - reset-names
+
 unevaluatedProperties: false
 
 examples:
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml linux-libre-6.12.44-gnu/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml
index fc8b97f82077..41fe00034742 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml
+++ linux-libre-6.12.44-gnu/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml
@@ -30,7 +30,7 @@ properties:
     maxItems: 1
 
   spi-max-frequency:
-    maximum: 30000000
+    maximum: 66000000
 
   reset-gpios:
     maxItems: 1
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml linux-libre-6.12.44-gnu/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml
index e850a8894758..bb40bb9e036e 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml
+++ linux-libre-6.12.44-gnu/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml
@@ -27,7 +27,7 @@ properties:
     description: |
       For multicolor LED support this property should be defined as either
       LED_COLOR_ID_RGB or LED_COLOR_ID_MULTI which can be found in
-      include/linux/leds/common.h.
+      include/dt-bindings/leds/common.h.
     enum: [ 8, 9 ]
 
 required:
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/media/i2c/st,st-mipid02.yaml linux-libre-6.12.44-gnu/Documentation/devicetree/bindings/media/i2c/st,st-mipid02.yaml
index b68141264c0e..4d40e75b4e1e 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/media/i2c/st,st-mipid02.yaml
+++ linux-libre-6.12.44-gnu/Documentation/devicetree/bindings/media/i2c/st,st-mipid02.yaml
@@ -71,7 +71,7 @@ properties:
                 description:
                   Any lane can be inverted or not.
                 minItems: 1
-                maxItems: 2
+                maxItems: 3
 
             required:
               - data-lanes
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml linux-libre-6.12.44-gnu/Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml
index bb81307dc11b..4fc78efaa550 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml
+++ linux-libre-6.12.44-gnu/Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml
@@ -50,15 +50,15 @@ properties:
     minimum: 0
     maximum: 1
 
-  rohm,charger-sense-resistor-ohms:
-    minimum: 10000000
-    maximum: 50000000
+  rohm,charger-sense-resistor-micro-ohms:
+    minimum: 10000
+    maximum: 50000
     description: |
-      BD71827 and BD71828 have SAR ADC for measuring charging currents.
-      External sense resistor (RSENSE in data sheet) should be used. If
-      something other but 30MOhm resistor is used the resistance value
-      should be given here in Ohms.
-    default: 30000000
+      BD71815 has SAR ADC for measuring charging currents. External sense
+      resistor (RSENSE in data sheet) should be used. If something other
+      but a 30 mOhm resistor is used the resistance value should be given
+      here in micro Ohms.
+    default: 30000
 
   regulators:
     $ref: /schemas/regulator/rohm,bd71815-regulator.yaml
@@ -67,7 +67,7 @@ properties:
 
   gpio-reserved-ranges:
     description: |
-      Usage of BD71828 GPIO pins can be changed via OTP. This property can be
+      Usage of BD71815 GPIO pins can be changed via OTP. This property can be
       used to mark the pins which should not be configured for GPIO. Please see
       the ../gpio/gpio.txt for more information.
 
@@ -113,7 +113,7 @@ examples:
             gpio-controller;
             #gpio-cells = <2>;
 
-            rohm,charger-sense-resistor-ohms = <10000000>;
+            rohm,charger-sense-resistor-micro-ohms = <10000>;
 
             regulators {
                 buck1: buck1 {
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/mmc/mmc-controller.yaml linux-libre-6.12.44-gnu/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
index 58ae298cd2fc..23884b8184a9 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
+++ linux-libre-6.12.44-gnu/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
@@ -25,7 +25,7 @@ properties:
   "#address-cells":
     const: 1
     description: |
-      The cell is the slot ID if a function subnode is used.
+      The cell is the SDIO function number if a function subnode is used.
 
   "#size-cells":
     const: 0
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/net/can/renesas,rcar-canfd.yaml linux-libre-6.12.44-gnu/Documentation/devicetree/bindings/net/can/renesas,rcar-canfd.yaml
index 7c5ac5d2e880..f6884f6e59e7 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/net/can/renesas,rcar-canfd.yaml
+++ linux-libre-6.12.44-gnu/Documentation/devicetree/bindings/net/can/renesas,rcar-canfd.yaml
@@ -170,7 +170,7 @@ allOf:
             const: renesas,r8a779h0-canfd
     then:
       patternProperties:
-        "^channel[5-7]$": false
+        "^channel[4-7]$": false
     else:
       if:
         not:
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/net/fsl,fec.yaml linux-libre-6.12.44-gnu/Documentation/devicetree/bindings/net/fsl,fec.yaml
index 5536c06139ca..24e863fdbdab 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/net/fsl,fec.yaml
+++ linux-libre-6.12.44-gnu/Documentation/devicetree/bindings/net/fsl,fec.yaml
@@ -183,6 +183,13 @@ properties:
     description:
       Register bits of stop mode control, the format is <&gpr req_gpr req_bit>.
 
+  fsl,pps-channel:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
+    description:
+      Specifies to which timer instance the PPS signal is routed.
+    enum: [0, 1, 2, 3]
+
   mdio:
     $ref: mdio.yaml#
     unevaluatedProperties: false
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml linux-libre-6.12.44-gnu/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml
index 898c1be2d6a4..f05aab2b1add 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml
+++ linux-libre-6.12.44-gnu/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml
@@ -149,7 +149,7 @@ allOf:
     then:
       properties:
         clocks:
-          minItems: 4
+          minItems: 6
 
         clock-names:
           items:
@@ -178,7 +178,7 @@ allOf:
     then:
       properties:
         clocks:
-          minItems: 4
+          minItems: 6
 
         clock-names:
           items:
@@ -207,6 +207,7 @@ allOf:
       properties:
         clocks:
           minItems: 4
+          maxItems: 4
 
         clock-names:
           items:
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml linux-libre-6.12.44-gnu/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml
index dc3a3f709fea..bac4d0b51d8a 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml
+++ linux-libre-6.12.44-gnu/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml
@@ -58,8 +58,7 @@ properties:
   fsl,phy-tx-vboost-level-microvolt:
     description:
       Adjust the boosted transmit launch pk-pk differential amplitude
-    minimum: 880
-    maximum: 1120
+    enum: [844, 1008, 1156]
 
   fsl,phy-comp-dis-tune-percent:
     description:
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-wakeup-interrupt.yaml linux-libre-6.12.44-gnu/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-wakeup-interrupt.yaml
index 4dfb49b0e07f..f82a3c7e6c29 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-wakeup-interrupt.yaml
+++ linux-libre-6.12.44-gnu/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-wakeup-interrupt.yaml
@@ -91,14 +91,17 @@ allOf:
   - if:
       properties:
         compatible:
-          # Match without "contains", to skip newer variants which are still
-          # compatible with samsung,exynos7-wakeup-eint
-          enum:
-            - samsung,s5pv210-wakeup-eint
-            - samsung,exynos4210-wakeup-eint
-            - samsung,exynos5433-wakeup-eint
-            - samsung,exynos7-wakeup-eint
-            - samsung,exynos7885-wakeup-eint
+          oneOf:
+            # Match without "contains", to skip newer variants which are still
+            # compatible with samsung,exynos7-wakeup-eint
+            - enum:
+                - samsung,exynos4210-wakeup-eint
+                - samsung,exynos7-wakeup-eint
+                - samsung,s5pv210-wakeup-eint
+            - contains:
+                enum:
+                  - samsung,exynos5433-wakeup-eint
+                  - samsung,exynos7885-wakeup-eint
     then:
       properties:
         interrupts:
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/pwm/adi,axi-pwmgen.yaml linux-libre-6.12.44-gnu/Documentation/devicetree/bindings/pwm/adi,axi-pwmgen.yaml
index ec6115d3796b..5575c58357d6 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/pwm/adi,axi-pwmgen.yaml
+++ linux-libre-6.12.44-gnu/Documentation/devicetree/bindings/pwm/adi,axi-pwmgen.yaml
@@ -27,22 +27,31 @@ properties:
     maxItems: 1
 
   "#pwm-cells":
-    const: 2
+    const: 3
 
   clocks:
-    maxItems: 1
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: axi
+      - const: ext
 
 required:
   - reg
   - clocks
+  - clock-names
 
 unevaluatedProperties: false
 
 examples:
   - |
     pwm@44b00000 {
-       compatible = "adi,axi-pwmgen-2.00.a";
-       reg = <0x44b00000 0x1000>;
-       clocks = <&spi_clk>;
-       #pwm-cells = <2>;
+        compatible = "adi,axi-pwmgen-2.00.a";
+        reg = <0x44b00000 0x1000>;
+        clocks = <&fpga_clk>, <&spi_clk>;
+        clock-names = "axi", "ext";
+        #pwm-cells = <3>;
     };
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/pwm/brcm,bcm7038-pwm.yaml linux-libre-6.12.44-gnu/Documentation/devicetree/bindings/pwm/brcm,bcm7038-pwm.yaml
index 119de3d7f9dd..44548a9da158 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/pwm/brcm,bcm7038-pwm.yaml
+++ linux-libre-6.12.44-gnu/Documentation/devicetree/bindings/pwm/brcm,bcm7038-pwm.yaml
@@ -35,8 +35,8 @@ additionalProperties: false
 examples:
   - |
     pwm: pwm@f0408000 {
-       compatible = "brcm,bcm7038-pwm";
-       reg = <0xf0408000 0x28>;
-       #pwm-cells = <2>;
-       clocks = <&upg_fixed>;
+        compatible = "brcm,bcm7038-pwm";
+        reg = <0xf0408000 0x28>;
+        #pwm-cells = <2>;
+        clocks = <&upg_fixed>;
     };
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/pwm/brcm,kona-pwm.yaml linux-libre-6.12.44-gnu/Documentation/devicetree/bindings/pwm/brcm,kona-pwm.yaml
index e86c8053b366..fd785da5d3d7 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/pwm/brcm,kona-pwm.yaml
+++ linux-libre-6.12.44-gnu/Documentation/devicetree/bindings/pwm/brcm,kona-pwm.yaml
@@ -43,9 +43,9 @@ examples:
     #include <dt-bindings/clock/bcm281xx.h>
 
     pwm@3e01a000 {
-       compatible = "brcm,bcm11351-pwm", "brcm,kona-pwm";
-       reg = <0x3e01a000 0xcc>;
-       clocks = <&slave_ccu BCM281XX_SLAVE_CCU_PWM>;
-       #pwm-cells = <3>;
+        compatible = "brcm,bcm11351-pwm", "brcm,kona-pwm";
+        reg = <0x3e01a000 0xcc>;
+        clocks = <&slave_ccu BCM281XX_SLAVE_CCU_PWM>;
+        #pwm-cells = <3>;
     };
 ...
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/regulator/mediatek,mt6357-regulator.yaml linux-libre-6.12.44-gnu/Documentation/devicetree/bindings/regulator/mediatek,mt6357-regulator.yaml
index 6327bb2f6ee0..698266c09e25 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/regulator/mediatek,mt6357-regulator.yaml
+++ linux-libre-6.12.44-gnu/Documentation/devicetree/bindings/regulator/mediatek,mt6357-regulator.yaml
@@ -33,7 +33,7 @@ patternProperties:
 
   "^ldo-v(camio18|aud28|aux18|io18|io28|rf12|rf18|cn18|cn28|fe28)$":
     type: object
-    $ref: fixed-regulator.yaml#
+    $ref: regulator.yaml#
     unevaluatedProperties: false
     description:
       Properties for single fixed LDO regulator.
@@ -112,7 +112,6 @@ examples:
           regulator-enable-ramp-delay = <220>;
         };
         mt6357_vfe28_reg: ldo-vfe28 {
-          compatible = "regulator-fixed";
           regulator-name = "vfe28";
           regulator-min-microvolt = <2800000>;
           regulator-max-microvolt = <2800000>;
@@ -125,14 +124,12 @@ examples:
           regulator-enable-ramp-delay = <110>;
         };
         mt6357_vrf18_reg: ldo-vrf18 {
-          compatible = "regulator-fixed";
           regulator-name = "vrf18";
           regulator-min-microvolt = <1800000>;
           regulator-max-microvolt = <1800000>;
           regulator-enable-ramp-delay = <110>;
         };
         mt6357_vrf12_reg: ldo-vrf12 {
-          compatible = "regulator-fixed";
           regulator-name = "vrf12";
           regulator-min-microvolt = <1200000>;
           regulator-max-microvolt = <1200000>;
@@ -157,14 +154,12 @@ examples:
           regulator-enable-ramp-delay = <264>;
         };
         mt6357_vcn28_reg: ldo-vcn28 {
-          compatible = "regulator-fixed";
           regulator-name = "vcn28";
           regulator-min-microvolt = <2800000>;
           regulator-max-microvolt = <2800000>;
           regulator-enable-ramp-delay = <264>;
         };
         mt6357_vcn18_reg: ldo-vcn18 {
-          compatible = "regulator-fixed";
           regulator-name = "vcn18";
           regulator-min-microvolt = <1800000>;
           regulator-max-microvolt = <1800000>;
@@ -183,7 +178,6 @@ examples:
           regulator-enable-ramp-delay = <264>;
         };
         mt6357_vcamio_reg: ldo-vcamio18 {
-          compatible = "regulator-fixed";
           regulator-name = "vcamio";
           regulator-min-microvolt = <1800000>;
           regulator-max-microvolt = <1800000>;
@@ -212,28 +206,24 @@ examples:
           regulator-always-on;
         };
         mt6357_vaux18_reg: ldo-vaux18 {
-          compatible = "regulator-fixed";
           regulator-name = "vaux18";
           regulator-min-microvolt = <1800000>;
           regulator-max-microvolt = <1800000>;
           regulator-enable-ramp-delay = <264>;
         };
         mt6357_vaud28_reg: ldo-vaud28 {
-          compatible = "regulator-fixed";
           regulator-name = "vaud28";
           regulator-min-microvolt = <2800000>;
           regulator-max-microvolt = <2800000>;
           regulator-enable-ramp-delay = <264>;
         };
         mt6357_vio28_reg: ldo-vio28 {
-          compatible = "regulator-fixed";
           regulator-name = "vio28";
           regulator-min-microvolt = <2800000>;
           regulator-max-microvolt = <2800000>;
           regulator-enable-ramp-delay = <264>;
         };
         mt6357_vio18_reg: ldo-vio18 {
-          compatible = "regulator-fixed";
           regulator-name = "vio18";
           regulator-min-microvolt = <1800000>;
           regulator-max-microvolt = <1800000>;
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml linux-libre-6.12.44-gnu/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml
index cd4aa27218a1..fa6743bb269d 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml
+++ linux-libre-6.12.44-gnu/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml
@@ -35,10 +35,6 @@ properties:
         $ref: regulator.yaml#
         unevaluatedProperties: false
 
-        properties:
-          regulator-compatible:
-            pattern: "^vbuck[1-4]$"
-
     additionalProperties: false
 
 required:
@@ -56,7 +52,6 @@ examples:
 
       regulators {
         vbuck1 {
-          regulator-compatible = "vbuck1";
           regulator-min-microvolt = <300000>;
           regulator-max-microvolt = <1193750>;
           regulator-enable-ramp-delay = <256>;
@@ -64,7 +59,6 @@ examples:
         };
 
         vbuck3 {
-          regulator-compatible = "vbuck3";
           regulator-min-microvolt = <300000>;
           regulator-max-microvolt = <1193750>;
           regulator-enable-ramp-delay = <256>;
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml linux-libre-6.12.44-gnu/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml
index f2fd2df68a9e..b7241ce975b9 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml
+++ linux-libre-6.12.44-gnu/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml
@@ -22,7 +22,7 @@ description:
   Each sub-node is identified using the node's name, with valid values listed
   for each of the pmics below.
 
-  For mp5496, s1, s2
+  For mp5496, s1, s2, l2, l5
 
   For pm2250, s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11,
   l12, l13, l14, l15, l16, l17, l18, l19, l20, l21, l22
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/serial/8250.yaml linux-libre-6.12.44-gnu/Documentation/devicetree/bindings/serial/8250.yaml
index 692aa05500fd..6ba0325039be 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/serial/8250.yaml
+++ linux-libre-6.12.44-gnu/Documentation/devicetree/bindings/serial/8250.yaml
@@ -45,7 +45,7 @@ allOf:
                   - ns16550
                   - ns16550a
     then:
-      anyOf:
+      oneOf:
         - required: [ clock-frequency ]
         - required: [ clocks ]
 
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/serial/rs485.yaml linux-libre-6.12.44-gnu/Documentation/devicetree/bindings/serial/rs485.yaml
index 9418fd66a8e9..b93254ad2a28 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/serial/rs485.yaml
+++ linux-libre-6.12.44-gnu/Documentation/devicetree/bindings/serial/rs485.yaml
@@ -18,16 +18,15 @@ properties:
     description: prop-encoded-array <a b>
     $ref: /schemas/types.yaml#/definitions/uint32-array
     items:
-      items:
-        - description: Delay between rts signal and beginning of data sent in
-            milliseconds. It corresponds to the delay before sending data.
-          default: 0
-          maximum: 100
-        - description: Delay between end of data sent and rts signal in milliseconds.
-            It corresponds to the delay after sending data and actual release
-            of the line.
-          default: 0
-          maximum: 100
+      - description: Delay between rts signal and beginning of data sent in
+          milliseconds. It corresponds to the delay before sending data.
+        default: 0
+        maximum: 100
+      - description: Delay between end of data sent and rts signal in milliseconds.
+          It corresponds to the delay after sending data and actual release
+          of the line.
+        default: 0
+        maximum: 100
 
   rs485-rts-active-high:
     description: drive RTS high when sending (this is the default).
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/soc/fsl/fsl,ls1028a-reset.yaml linux-libre-6.12.44-gnu/Documentation/devicetree/bindings/soc/fsl/fsl,ls1028a-reset.yaml
index 31295be91013..234089b5954d 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/soc/fsl/fsl,ls1028a-reset.yaml
+++ linux-libre-6.12.44-gnu/Documentation/devicetree/bindings/soc/fsl/fsl,ls1028a-reset.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Freescale Layerscape Reset Registers Module
 
 maintainers:
-  - Frank Li
+  - Frank Li <Frank.Li@nxp.com>
 
 description:
   Reset Module includes chip reset, service processor control and Reset Control
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/soc/fsl/fsl,qman-fqd.yaml linux-libre-6.12.44-gnu/Documentation/devicetree/bindings/soc/fsl/fsl,qman-fqd.yaml
index de0b4ae740ff..a975bce59975 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/soc/fsl/fsl,qman-fqd.yaml
+++ linux-libre-6.12.44-gnu/Documentation/devicetree/bindings/soc/fsl/fsl,qman-fqd.yaml
@@ -50,7 +50,7 @@ required:
   - compatible
 
 allOf:
-  - $ref: reserved-memory.yaml
+  - $ref: /schemas/reserved-memory/reserved-memory.yaml
 
 unevaluatedProperties: false
 
@@ -61,7 +61,7 @@ examples:
         #size-cells = <2>;
 
         qman-fqd {
-            compatible = "shared-dma-pool";
+            compatible = "fsl,qman-fqd";
             size = <0 0x400000>;
             alignment = <0 0x400000>;
             no-map;
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/sound/mt6359.yaml linux-libre-6.12.44-gnu/Documentation/devicetree/bindings/sound/mt6359.yaml
index 23d411fc4200..128698630c86 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/sound/mt6359.yaml
+++ linux-libre-6.12.44-gnu/Documentation/devicetree/bindings/sound/mt6359.yaml
@@ -23,8 +23,8 @@ properties:
       Indicates how many data pins are used to transmit two channels of PDM
       signal. 0 means two wires, 1 means one wire. Default value is 0.
     enum:
-      - 0 # one wire
-      - 1 # two wires
+      - 0 # two wires
+      - 1 # one wire
 
   mediatek,mic-type-0:
     $ref: /schemas/types.yaml#/definitions/uint32
@@ -53,9 +53,9 @@ additionalProperties: false
 
 examples:
   - |
-    mt6359codec: mt6359codec {
-      mediatek,dmic-mode = <0>;
-      mediatek,mic-type-0 = <2>;
+    mt6359codec: audio-codec {
+        mediatek,dmic-mode = <0>;
+        mediatek,mic-type-0 = <2>;
     };
 
 ...
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/sound/realtek,rt5645.yaml linux-libre-6.12.44-gnu/Documentation/devicetree/bindings/sound/realtek,rt5645.yaml
index 13f09f1bc800..0a698798c22b 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/sound/realtek,rt5645.yaml
+++ linux-libre-6.12.44-gnu/Documentation/devicetree/bindings/sound/realtek,rt5645.yaml
@@ -51,7 +51,7 @@ properties:
     description: Power supply for AVDD, providing 1.8V.
 
   cpvdd-supply:
-    description: Power supply for CPVDD, providing 3.5V.
+    description: Power supply for CPVDD, providing 1.8V.
 
   hp-detect-gpios:
     description: 
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/ufs/mediatek,ufs.yaml linux-libre-6.12.44-gnu/Documentation/devicetree/bindings/ufs/mediatek,ufs.yaml
index 32fd535a514a..20f341d25ebc 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/ufs/mediatek,ufs.yaml
+++ linux-libre-6.12.44-gnu/Documentation/devicetree/bindings/ufs/mediatek,ufs.yaml
@@ -33,6 +33,10 @@ properties:
 
   vcc-supply: true
 
+  mediatek,ufs-disable-mcq:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: The mask to disable MCQ (Multi-Circular Queue) for UFS host.
+
 required:
   - compatible
   - clocks
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/usb/cypress,hx3.yaml linux-libre-6.12.44-gnu/Documentation/devicetree/bindings/usb/cypress,hx3.yaml
index e44e88d993d0..e802e9ac975b 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/usb/cypress,hx3.yaml
+++ linux-libre-6.12.44-gnu/Documentation/devicetree/bindings/usb/cypress,hx3.yaml
@@ -14,9 +14,22 @@ allOf:
 
 properties:
   compatible:
-    enum:
-      - usb4b4,6504
-      - usb4b4,6506
+    oneOf:
+      - enum:
+          - usb4b4,6504
+          - usb4b4,6506
+      - items:
+          - enum:
+              - usb4b4,6500
+              - usb4b4,6508
+          - const: usb4b4,6504
+      - items:
+          - enum:
+              - usb4b4,6502
+              - usb4b4,6503
+              - usb4b4,6507
+              - usb4b4,650a
+          - const: usb4b4,6506
 
   reg: true
 
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/vendor-prefixes.yaml linux-libre-6.12.44-gnu/Documentation/devicetree/bindings/vendor-prefixes.yaml
index b320a39de7fe..af9a8d43b247 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ linux-libre-6.12.44-gnu/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -581,6 +581,8 @@ patternProperties:
     description: GlobalTop Technology, Inc.
   "^gmt,.*":
     description: Global Mixed-mode Technology, Inc.
+  "^gocontroll,.*":
+    description: GOcontroll Modular Embedded Electronics B.V.
   "^goldelico,.*":
     description: Golden Delicious Computers GmbH & Co. KG
   "^goodix,.*":
@@ -844,6 +846,8 @@ patternProperties:
     description: Linux-specific binding
   "^linx,.*":
     description: Linx Technologies
+  "^liontron,.*":
+    description: Shenzhen Liontron Technology Co., Ltd
   "^liteon,.*":
     description: LITE-ON Technology Corp.
   "^litex,.*":
@@ -1013,6 +1017,8 @@ patternProperties:
     description: Shanghai Neardi Technology Co., Ltd.
   "^nec,.*":
     description: NEC LCD Technologies, Ltd.
+  "^neofidelity,.*":
+    description: Neofidelity Inc.
   "^neonode,.*":
     description: Neonode Inc.
   "^netgear,.*":
diff --git linux-libre-6.12-gnu/Documentation/driver-api/crypto/iaa/iaa-crypto.rst linux-libre-6.12.44-gnu/Documentation/driver-api/crypto/iaa/iaa-crypto.rst
index bba40158dd5c..8e50b900d51c 100644
--- linux-libre-6.12-gnu/Documentation/driver-api/crypto/iaa/iaa-crypto.rst
+++ linux-libre-6.12.44-gnu/Documentation/driver-api/crypto/iaa/iaa-crypto.rst
@@ -272,7 +272,7 @@ The available attributes are:
       echo async_irq > /sys/bus/dsa/drivers/crypto/sync_mode
 
     Async mode without interrupts (caller must poll) can be enabled by
-    writing 'async' to it::
+    writing 'async' to it (please see Caveat)::
 
       echo async > /sys/bus/dsa/drivers/crypto/sync_mode
 
@@ -283,6 +283,13 @@ The available attributes are:
 
     The default mode is 'sync'.
 
+    Caveat: since the only mechanism that iaa_crypto currently implements
+    for async polling without interrupts is via the 'sync' mode as
+    described earlier, writing 'async' to
+    '/sys/bus/dsa/drivers/crypto/sync_mode' will internally enable the
+    'sync' mode. This is to ensure correct iaa_crypto behavior until true
+    async polling without interrupts is enabled in iaa_crypto.
+
 .. _iaa_default_config:
 
 IAA Default Configuration
diff --git linux-libre-6.12-gnu/Documentation/driver-api/serial/driver.rst linux-libre-6.12.44-gnu/Documentation/driver-api/serial/driver.rst
index 84b43061c11b..60434f2b0286 100644
--- linux-libre-6.12-gnu/Documentation/driver-api/serial/driver.rst
+++ linux-libre-6.12.44-gnu/Documentation/driver-api/serial/driver.rst
@@ -103,4 +103,4 @@ Some helpers are provided in order to set/get modem control lines via GPIO.
 .. kernel-doc:: drivers/tty/serial/serial_mctrl_gpio.c
    :identifiers: mctrl_gpio_init mctrl_gpio_free mctrl_gpio_to_gpiod
            mctrl_gpio_set mctrl_gpio_get mctrl_gpio_enable_ms
-           mctrl_gpio_disable_ms
+           mctrl_gpio_disable_ms_sync mctrl_gpio_disable_ms_no_sync
diff --git linux-libre-6.12-gnu/Documentation/filesystems/f2fs.rst linux-libre-6.12.44-gnu/Documentation/filesystems/f2fs.rst
index 68a0885fb5e6..fdf31514fb1c 100644
--- linux-libre-6.12-gnu/Documentation/filesystems/f2fs.rst
+++ linux-libre-6.12.44-gnu/Documentation/filesystems/f2fs.rst
@@ -235,9 +235,9 @@ usrjquota=<file>	 Appoint specified file and type during mount, so that quota
 grpjquota=<file>	 information can be properly updated during recovery flow,
 prjjquota=<file>	 <quota file>: must be in root directory;
 jqfmt=<quota type>	 <quota type>: [vfsold,vfsv0,vfsv1].
-offusrjquota		 Turn off user journalled quota.
-offgrpjquota		 Turn off group journalled quota.
-offprjjquota		 Turn off project journalled quota.
+usrjquota=		 Turn off user journalled quota.
+grpjquota=		 Turn off group journalled quota.
+prjjquota=		 Turn off project journalled quota.
 quota			 Enable plain user disk quota accounting.
 noquota			 Disable all plain disk quota option.
 alloc_mode=%s		 Adjust block allocation policy, which supports "reuse"
diff --git linux-libre-6.12-gnu/Documentation/filesystems/fscrypt.rst linux-libre-6.12.44-gnu/Documentation/filesystems/fscrypt.rst
index 04eaab01314b..b07368e949ae 100644
--- linux-libre-6.12-gnu/Documentation/filesystems/fscrypt.rst
+++ linux-libre-6.12.44-gnu/Documentation/filesystems/fscrypt.rst
@@ -141,9 +141,8 @@ However, these ioctls have some limitations:
   CONFIG_PAGE_POISONING=y in your kernel config and add page_poison=1
   to your kernel command line.  However, this has a performance cost.
 
-- Secret keys might still exist in CPU registers, in crypto
-  accelerator hardware (if used by the crypto API to implement any of
-  the algorithms), or in other places not explicitly considered here.
+- Secret keys might still exist in CPU registers or in other places
+  not explicitly considered here.
 
 Limitations of v1 policies
 ~~~~~~~~~~~~~~~~~~~~~~~~~~
@@ -378,9 +377,12 @@ the work is done by XChaCha12, which is much faster than AES when AES
 acceleration is unavailable.  For more information about Adiantum, see
 `the Adiantum paper <https://eprint.iacr.org/2018/720.pdf>`_.
 
-The (AES-128-CBC-ESSIV, AES-128-CBC-CTS) pair exists only to support
-systems whose only form of AES acceleration is an off-CPU crypto
-accelerator such as CAAM or CESA that does not support XTS.
+The (AES-128-CBC-ESSIV, AES-128-CBC-CTS) pair was added to try to
+provide a more efficient option for systems that lack AES instructions
+in the CPU but do have a non-inline crypto engine such as CAAM or CESA
+that supports AES-CBC (and not AES-XTS).  This is deprecated.  It has
+been shown that just doing AES on the CPU is actually faster.
+Moreover, Adiantum is faster still and is recommended on such systems.
 
 The remaining mode pairs are the "national pride ciphers":
 
@@ -1289,22 +1291,13 @@ this by validating all top-level encryption policies prior to access.
 Inline encryption support
 =========================
 
-By default, fscrypt uses the kernel crypto API for all cryptographic
-operations (other than HKDF, which fscrypt partially implements
-itself).  The kernel crypto API supports hardware crypto accelerators,
-but only ones that work in the traditional way where all inputs and
-outputs (e.g. plaintexts and ciphertexts) are in memory.  fscrypt can
-take advantage of such hardware, but the traditional acceleration
-model isn't particularly efficient and fscrypt hasn't been optimized
-for it.
-
-Instead, many newer systems (especially mobile SoCs) have *inline
-encryption hardware* that can encrypt/decrypt data while it is on its
-way to/from the storage device.  Linux supports inline encryption
-through a set of extensions to the block layer called *blk-crypto*.
-blk-crypto allows filesystems to attach encryption contexts to bios
-(I/O requests) to specify how the data will be encrypted or decrypted
-in-line.  For more information about blk-crypto, see
+Many newer systems (especially mobile SoCs) have *inline encryption
+hardware* that can encrypt/decrypt data while it is on its way to/from
+the storage device.  Linux supports inline encryption through a set of
+extensions to the block layer called *blk-crypto*.  blk-crypto allows
+filesystems to attach encryption contexts to bios (I/O requests) to
+specify how the data will be encrypted or decrypted in-line.  For more
+information about blk-crypto, see
 :ref:`Documentation/block/inline-encryption.rst <inline_encryption>`.
 
 On supported filesystems (currently ext4 and f2fs), fscrypt can use
diff --git linux-libre-6.12-gnu/Documentation/filesystems/mount_api.rst linux-libre-6.12.44-gnu/Documentation/filesystems/mount_api.rst
index 317934c9e8fc..d92c276f1575 100644
--- linux-libre-6.12-gnu/Documentation/filesystems/mount_api.rst
+++ linux-libre-6.12.44-gnu/Documentation/filesystems/mount_api.rst
@@ -770,7 +770,8 @@ process the parameters it is given.
 
    * ::
 
-       bool fs_validate_description(const struct fs_parameter_description *desc);
+       bool fs_validate_description(const char *name,
+                                    const struct fs_parameter_description *desc);
 
      This performs some validation checks on a parameter description.  It
      returns true if the description is good and false if it is not.  It will
diff --git linux-libre-6.12-gnu/Documentation/firmware-guide/acpi/dsd/data-node-references.rst linux-libre-6.12.44-gnu/Documentation/firmware-guide/acpi/dsd/data-node-references.rst
index 8d8b53e96bcf..ccb4b153e6f2 100644
--- linux-libre-6.12-gnu/Documentation/firmware-guide/acpi/dsd/data-node-references.rst
+++ linux-libre-6.12.44-gnu/Documentation/firmware-guide/acpi/dsd/data-node-references.rst
@@ -12,11 +12,14 @@ ACPI in general allows referring to device objects in the tree only.
 Hierarchical data extension nodes may not be referred to directly, hence this
 document defines a scheme to implement such references.
 
-A reference consist of the device object name followed by one or more
-hierarchical data extension [dsd-guide] keys. Specifically, the hierarchical
-data extension node which is referred to by the key shall lie directly under
-the parent object i.e. either the device object or another hierarchical data
-extension node.
+A reference to a _DSD hierarchical data node is a string consisting of a
+device object reference followed by a dot (".") and a relative path to a data
+node object. Do not use non-string references as this will produce a copy of
+the hierarchical data node, not a reference!
+
+The hierarchical data extension node which is referred to shall be located
+directly under its parent object i.e. either the device object or another
+hierarchical data extension node [dsd-guide].
 
 The keys in the hierarchical data nodes shall consist of the name of the node,
 "@" character and the number of the node in hexadecimal notation (without pre-
@@ -33,11 +36,9 @@ extension key.
 Example
 =======
 
-In the ASL snippet below, the "reference" _DSD property contains a
-device object reference to DEV0 and under that device object, a
-hierarchical data extension key "node@1" referring to the NOD1 object
-and lastly, a hierarchical data extension key "anothernode" referring to
-the ANOD object which is also the final target node of the reference.
+In the ASL snippet below, the "reference" _DSD property contains a string
+reference to a hierarchical data extension node ANOD under DEV0 under the parent
+of DEV1. ANOD is also the final target node of the reference.
 ::
 
 	Device (DEV0)
@@ -76,10 +77,7 @@ the ANOD object which is also the final target node of the reference.
 	    Name (_DSD, Package () {
 		ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
 		Package () {
-		    Package () {
-			"reference", Package () {
-			    ^DEV0, "node@1", "anothernode"
-			}
+		    Package () { "reference", "^DEV0.ANOD" }
 		    },
 		}
 	    })
diff --git linux-libre-6.12-gnu/Documentation/firmware-guide/acpi/dsd/graph.rst linux-libre-6.12.44-gnu/Documentation/firmware-guide/acpi/dsd/graph.rst
index b9dbfc73ed25..d6ae5ffa748c 100644
--- linux-libre-6.12-gnu/Documentation/firmware-guide/acpi/dsd/graph.rst
+++ linux-libre-6.12.44-gnu/Documentation/firmware-guide/acpi/dsd/graph.rst
@@ -66,12 +66,9 @@ of that port shall be zero. Similarly, if a port may only have a single
 endpoint, the number of that endpoint shall be zero.
 
 The endpoint reference uses property extension with "remote-endpoint" property
-name followed by a reference in the same package. Such references consist of
-the remote device reference, the first package entry of the port data extension
-reference under the device and finally the first package entry of the endpoint
-data extension reference under the port. Individual references thus appear as::
+name followed by a string reference in the same package. [data-node-ref]::
 
-    Package() { device, "port@X", "endpoint@Y" }
+    "device.datanode"
 
 In the above example, "X" is the number of the port and "Y" is the number of
 the endpoint.
@@ -109,7 +106,7 @@ A simple example of this is show below::
 		ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
 		Package () {
 		    Package () { "reg", 0 },
-		    Package () { "remote-endpoint", Package() { \_SB.PCI0.ISP, "port@4", "endpoint@0" } },
+		    Package () { "remote-endpoint", "\\_SB.PCI0.ISP.EP40" },
 		}
 	    })
 	}
@@ -141,7 +138,7 @@ A simple example of this is show below::
 		ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
 		Package () {
 		    Package () { "reg", 0 },
-		    Package () { "remote-endpoint", Package () { \_SB.PCI0.I2C2.CAM0, "port@0", "endpoint@0" } },
+		    Package () { "remote-endpoint", "\\_SB.PCI0.I2C2.CAM0.EP00" },
 		}
 	    })
 	}
diff --git linux-libre-6.12-gnu/Documentation/firmware-guide/acpi/dsd/leds.rst linux-libre-6.12.44-gnu/Documentation/firmware-guide/acpi/dsd/leds.rst
index 93db592c93c7..a97cd07d49be 100644
--- linux-libre-6.12-gnu/Documentation/firmware-guide/acpi/dsd/leds.rst
+++ linux-libre-6.12.44-gnu/Documentation/firmware-guide/acpi/dsd/leds.rst
@@ -15,11 +15,6 @@ Referring to LEDs in Device tree is documented in [video-interfaces], in
 "flash-leds" property documentation. In short, LEDs are directly referred to by
 using phandles.
 
-While Device tree allows referring to any node in the tree [devicetree], in
-ACPI references are limited to device nodes only [acpi]. For this reason using
-the same mechanism on ACPI is not possible. A mechanism to refer to non-device
-ACPI nodes is documented in [data-node-ref].
-
 ACPI allows (as does DT) using integer arguments after the reference. A
 combination of the LED driver device reference and an integer argument,
 referring to the "reg" property of the relevant LED, is used to identify
@@ -74,7 +69,7 @@ omitted. ::
 			Package () {
 				Package () {
 					"flash-leds",
-					Package () { ^LED, "led@0", ^LED, "led@1" },
+					Package () { "^LED.LED0", "^LED.LED1" },
 				}
 			}
 		})
diff --git linux-libre-6.12-gnu/Documentation/firmware-guide/acpi/i2c-muxes.rst linux-libre-6.12.44-gnu/Documentation/firmware-guide/acpi/i2c-muxes.rst
index 3a8997ccd7c4..f366539acd79 100644
--- linux-libre-6.12-gnu/Documentation/firmware-guide/acpi/i2c-muxes.rst
+++ linux-libre-6.12.44-gnu/Documentation/firmware-guide/acpi/i2c-muxes.rst
@@ -14,7 +14,7 @@ Consider this topology::
     |      |   | 0x70 |--CH01--> i2c client B (0x50)
     +------+   +------+
 
-which corresponds to the following ASL::
+which corresponds to the following ASL (in the scope of \_SB)::
 
     Device (SMB1)
     {
@@ -24,7 +24,7 @@ which corresponds to the following ASL::
             Name (_HID, ...)
             Name (_CRS, ResourceTemplate () {
                 I2cSerialBus (0x70, ControllerInitiated, I2C_SPEED,
-                            AddressingMode7Bit, "^SMB1", 0x00,
+                            AddressingMode7Bit, "\\_SB.SMB1", 0x00,
                             ResourceConsumer,,)
             }
 
@@ -37,7 +37,7 @@ which corresponds to the following ASL::
                     Name (_HID, ...)
                     Name (_CRS, ResourceTemplate () {
                         I2cSerialBus (0x50, ControllerInitiated, I2C_SPEED,
-                                    AddressingMode7Bit, "^CH00", 0x00,
+                                    AddressingMode7Bit, "\\_SB.SMB1.CH00", 0x00,
                                     ResourceConsumer,,)
                     }
                 }
@@ -52,7 +52,7 @@ which corresponds to the following ASL::
                     Name (_HID, ...)
                     Name (_CRS, ResourceTemplate () {
                         I2cSerialBus (0x50, ControllerInitiated, I2C_SPEED,
-                                    AddressingMode7Bit, "^CH01", 0x00,
+                                    AddressingMode7Bit, "\\_SB.SMB1.CH01", 0x00,
                                     ResourceConsumer,,)
                     }
                 }
diff --git linux-libre-6.12-gnu/Documentation/gpu/drm-kms-helpers.rst linux-libre-6.12.44-gnu/Documentation/gpu/drm-kms-helpers.rst
index c3e58856f75b..96c03b9a644e 100644
--- linux-libre-6.12-gnu/Documentation/gpu/drm-kms-helpers.rst
+++ linux-libre-6.12.44-gnu/Documentation/gpu/drm-kms-helpers.rst
@@ -230,6 +230,9 @@ Panel Helper Reference
 .. kernel-doc:: drivers/gpu/drm/drm_panel_orientation_quirks.c
    :export:
 
+.. kernel-doc:: drivers/gpu/drm/drm_panel_backlight_quirks.c
+   :export:
+
 Panel Self Refresh Helper Reference
 ===================================
 
diff --git linux-libre-6.12-gnu/Documentation/gpu/xe/index.rst linux-libre-6.12.44-gnu/Documentation/gpu/xe/index.rst
index 3f07aa3b5432..89bbdcccf8eb 100644
--- linux-libre-6.12-gnu/Documentation/gpu/xe/index.rst
+++ linux-libre-6.12.44-gnu/Documentation/gpu/xe/index.rst
@@ -16,6 +16,7 @@ DG2, etc is provided to prototype the driver.
    xe_migrate
    xe_cs
    xe_pm
+   xe_gt_freq
    xe_pcode
    xe_gt_mcr
    xe_wa
diff --git linux-libre-6.12-gnu/Documentation/gpu/xe/xe_gt_freq.rst linux-libre-6.12.44-gnu/Documentation/gpu/xe/xe_gt_freq.rst
new file mode 100644
index 000000000000..c0811200e327
--- /dev/null
+++ linux-libre-6.12.44-gnu/Documentation/gpu/xe/xe_gt_freq.rst
@@ -0,0 +1,14 @@
+.. SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+==========================
+Xe GT Frequency Management
+==========================
+
+.. kernel-doc:: drivers/gpu/drm/xe/xe_gt_freq.c
+   :doc: Xe GT Frequency Management
+
+Internal API
+============
+
+.. kernel-doc:: drivers/gpu/drm/xe/xe_gt_freq.c
+   :internal:
diff --git linux-libre-6.12-gnu/Documentation/hwmon/dell-smm-hwmon.rst linux-libre-6.12.44-gnu/Documentation/hwmon/dell-smm-hwmon.rst
index 74905675d71f..5a4edb6565cf 100644
--- linux-libre-6.12-gnu/Documentation/hwmon/dell-smm-hwmon.rst
+++ linux-libre-6.12.44-gnu/Documentation/hwmon/dell-smm-hwmon.rst
@@ -32,12 +32,12 @@ Temperature sensors and fans can be queried and set via the standard
 =============================== ======= =======================================
 Name				Perm	Description
 =============================== ======= =======================================
-fan[1-3]_input                  RO      Fan speed in RPM.
-fan[1-3]_label                  RO      Fan label.
-fan[1-3]_min                    RO      Minimal Fan speed in RPM
-fan[1-3]_max                    RO      Maximal Fan speed in RPM
-fan[1-3]_target                 RO      Expected Fan speed in RPM
-pwm[1-3]                        RW      Control the fan PWM duty-cycle.
+fan[1-4]_input                  RO      Fan speed in RPM.
+fan[1-4]_label                  RO      Fan label.
+fan[1-4]_min                    RO      Minimal Fan speed in RPM
+fan[1-4]_max                    RO      Maximal Fan speed in RPM
+fan[1-4]_target                 RO      Expected Fan speed in RPM
+pwm[1-4]                        RW      Control the fan PWM duty-cycle.
 pwm1_enable                     WO      Enable or disable automatic BIOS fan
                                         control (not supported on all laptops,
                                         see below for details).
@@ -93,7 +93,7 @@ Again, when you find new codes, we'd be happy to have your patches!
 ---------------------------
 
 The driver also exports the fans as thermal cooling devices with
-``type`` set to ``dell-smm-fan[1-3]``. This allows for easy fan control
+``type`` set to ``dell-smm-fan[1-4]``. This allows for easy fan control
 using one of the thermal governors.
 
 Module parameters
diff --git linux-libre-6.12-gnu/Documentation/i2c/busses/i2c-i801.rst linux-libre-6.12.44-gnu/Documentation/i2c/busses/i2c-i801.rst
index c840b597912c..47e8ac5b7099 100644
--- linux-libre-6.12-gnu/Documentation/i2c/busses/i2c-i801.rst
+++ linux-libre-6.12.44-gnu/Documentation/i2c/busses/i2c-i801.rst
@@ -49,6 +49,7 @@ Supported adapters:
   * Intel Meteor Lake (SOC and PCH)
   * Intel Birch Stream (SOC)
   * Intel Arrow Lake (SOC)
+  * Intel Panther Lake (SOC)
 
    Datasheets: Publicly available at the Intel website
 
diff --git linux-libre-6.12-gnu/Documentation/kbuild/makefiles.rst linux-libre-6.12.44-gnu/Documentation/kbuild/makefiles.rst
index 7964e0c245ae..81607ce40759 100644
--- linux-libre-6.12-gnu/Documentation/kbuild/makefiles.rst
+++ linux-libre-6.12.44-gnu/Documentation/kbuild/makefiles.rst
@@ -656,6 +656,20 @@ cc-cross-prefix
             endif
     endif
 
+$(RUSTC) support functions
+--------------------------
+
+rustc-min-version
+  rustc-min-version tests if the value of $(CONFIG_RUSTC_VERSION) is greater
+  than or equal to the provided value and evaluates to y if so.
+
+  Example::
+
+    rustflags-$(call rustc-min-version, 108500) := -Cfoo
+
+  In this example, rustflags-y will be assigned the value -Cfoo if
+  $(CONFIG_RUSTC_VERSION) is >= 1.85.0.
+
 $(LD) support functions
 -----------------------
 
diff --git linux-libre-6.12-gnu/Documentation/locking/seqlock.rst linux-libre-6.12.44-gnu/Documentation/locking/seqlock.rst
index bfda1a5fecad..ec6411d02ac8 100644
--- linux-libre-6.12-gnu/Documentation/locking/seqlock.rst
+++ linux-libre-6.12.44-gnu/Documentation/locking/seqlock.rst
@@ -153,7 +153,7 @@ Use seqcount_latch_t when the write side sections cannot be protected
 from interruption by readers. This is typically the case when the read
 side can be invoked from NMI handlers.
 
-Check `raw_write_seqcount_latch()` for more information.
+Check `write_seqcount_latch()` for more information.
 
 
 .. _seqlock_t:
diff --git linux-libre-6.12-gnu/Documentation/netlink/specs/ethtool.yaml linux-libre-6.12.44-gnu/Documentation/netlink/specs/ethtool.yaml
index 6a050d755b9c..4936aa5855b1 100644
--- linux-libre-6.12-gnu/Documentation/netlink/specs/ethtool.yaml
+++ linux-libre-6.12.44-gnu/Documentation/netlink/specs/ethtool.yaml
@@ -96,7 +96,12 @@ attribute-sets:
         name: bits
         type: nest
         nested-attributes: bitset-bits
-
+      -
+        name: value
+        type: binary
+      -
+        name: mask
+        type: binary
   -
     name: string
     attributes:
@@ -1677,9 +1682,6 @@ operations:
 
       do: &module-eeprom-get-op
         request:
-          attributes:
-            - header
-        reply:
           attributes:
             - header
             - offset
@@ -1687,6 +1689,9 @@ operations:
             - page
             - bank
             - i2c-address
+        reply:
+          attributes:
+            - header
             - data
       dump: *module-eeprom-get-op
     -
diff --git linux-libre-6.12-gnu/Documentation/netlink/specs/ovs_vport.yaml linux-libre-6.12.44-gnu/Documentation/netlink/specs/ovs_vport.yaml
index 86ba9ac2a521..b538bb99ee9b 100644
--- linux-libre-6.12-gnu/Documentation/netlink/specs/ovs_vport.yaml
+++ linux-libre-6.12.44-gnu/Documentation/netlink/specs/ovs_vport.yaml
@@ -123,12 +123,12 @@ attribute-sets:
 
 operations:
   name-prefix: ovs-vport-cmd-
+  fixed-header: ovs-header
   list:
     -
       name: new
       doc: Create a new OVS vport
       attribute-set: vport
-      fixed-header: ovs-header
       do:
         request:
           attributes:
@@ -141,7 +141,6 @@ operations:
       name: del
       doc: Delete existing OVS vport from a data path
       attribute-set: vport
-      fixed-header: ovs-header
       do:
         request:
           attributes:
@@ -152,7 +151,6 @@ operations:
       name: get
       doc: Get / dump OVS vport configuration and state
       attribute-set: vport
-      fixed-header: ovs-header
       do: &vport-get-op
         request:
           attributes:
diff --git linux-libre-6.12-gnu/Documentation/netlink/specs/rt_link.yaml linux-libre-6.12.44-gnu/Documentation/netlink/specs/rt_link.yaml
index 0c4d5d40cae9..a048fc30389d 100644
--- linux-libre-6.12-gnu/Documentation/netlink/specs/rt_link.yaml
+++ linux-libre-6.12.44-gnu/Documentation/netlink/specs/rt_link.yaml
@@ -1094,11 +1094,10 @@ attribute-sets:
       -
         name: prop-list
         type: nest
-        nested-attributes: link-attrs
+        nested-attributes: prop-list-link-attrs
       -
         name: alt-ifname
         type: string
-        multi-attr: true
       -
         name: perm-address
         type: binary
@@ -1137,6 +1136,13 @@ attribute-sets:
         name: dpll-pin
         type: nest
         nested-attributes: link-dpll-pin-attrs
+  -
+    name: prop-list-link-attrs
+    subset-of: link-attrs
+    attributes:
+      -
+        name: alt-ifname
+        multi-attr: true
   -
     name: af-spec-attrs
     attributes:
@@ -2071,9 +2077,10 @@ attribute-sets:
         type: u32
   -
     name: mctp-attrs
+    name-prefix: ifla-mctp-
     attributes:
       -
-        name: mctp-net
+        name: net
         type: u32
   -
     name: stats-attrs
@@ -2319,7 +2326,6 @@ operations:
             - min-mtu
             - max-mtu
             - prop-list
-            - alt-ifname
             - perm-address
             - proto-down-reason
             - parent-dev-name
diff --git linux-libre-6.12-gnu/Documentation/netlink/specs/tc.yaml linux-libre-6.12.44-gnu/Documentation/netlink/specs/tc.yaml
index b02d59a0349c..043f205bc1ae 100644
--- linux-libre-6.12-gnu/Documentation/netlink/specs/tc.yaml
+++ linux-libre-6.12.44-gnu/Documentation/netlink/specs/tc.yaml
@@ -227,7 +227,7 @@ definitions:
         type: u8
         doc: log(P_max / (qth-max - qth-min))
       -
-        name: Scell_log
+        name: Scell-log
         type: u8
         doc: cell size for idle damping
       -
@@ -248,7 +248,7 @@ definitions:
         name: DPs
         type: u32
       -
-        name: def_DP
+        name: def-DP
         type: u32
       -
         name: grio
@@ -2017,7 +2017,8 @@ attribute-sets:
     attributes:
       -
         name: act
-        type: nest
+        type: indexed-array
+        sub-type: nest
         nested-attributes: tc-act-attrs
       -
         name: police
@@ -2250,7 +2251,8 @@ attribute-sets:
     attributes:
       -
         name: act
-        type: nest
+        type: indexed-array
+        sub-type: nest
         nested-attributes: tc-act-attrs
       -
         name: police
@@ -2745,7 +2747,7 @@ attribute-sets:
         type: u16
         byte-order: big-endian
       -
-        name: key-l2-tpv3-sid
+        name: key-l2tpv3-sid
         type: u32
         byte-order: big-endian
       -
@@ -3504,7 +3506,7 @@ attribute-sets:
         name: rate64
         type: u64
       -
-        name: prate4
+        name: prate64
         type: u64
       -
         name: burst
diff --git linux-libre-6.12-gnu/Documentation/networking/ip-sysctl.rst linux-libre-6.12.44-gnu/Documentation/networking/ip-sysctl.rst
index eacf8983e230..dcbb6f6caf6d 100644
--- linux-libre-6.12-gnu/Documentation/networking/ip-sysctl.rst
+++ linux-libre-6.12.44-gnu/Documentation/networking/ip-sysctl.rst
@@ -2170,6 +2170,12 @@ nexthop_compat_mode - BOOLEAN
 	understands the new API, this sysctl can be disabled to achieve full
 	performance benefits of the new API by disabling the nexthop expansion
 	and extraneous notifications.
+
+	Note that as a backward-compatible mode, dumping of modern features
+	might be incomplete or wrong. For example, resilient groups will not be
+	shown as such, but rather as just a list of next hops. Also weights that
+	do not fit into 8 bits will show incorrectly.
+
 	Default: true (backward compat mode)
 
 fib_notify_on_flag_change - INTEGER
diff --git linux-libre-6.12-gnu/Documentation/networking/iso15765-2.rst linux-libre-6.12.44-gnu/Documentation/networking/iso15765-2.rst
index 0e9d96074178..37ebb2c417cb 100644
--- linux-libre-6.12-gnu/Documentation/networking/iso15765-2.rst
+++ linux-libre-6.12.44-gnu/Documentation/networking/iso15765-2.rst
@@ -369,8 +369,8 @@ to their default.
 
   addr.can_family = AF_CAN;
   addr.can_ifindex = if_nametoindex("can0");
-  addr.tp.tx_id = 0x18DA42F1 | CAN_EFF_FLAG;
-  addr.tp.rx_id = 0x18DAF142 | CAN_EFF_FLAG;
+  addr.can_addr.tp.tx_id = 0x18DA42F1 | CAN_EFF_FLAG;
+  addr.can_addr.tp.rx_id = 0x18DAF142 | CAN_EFF_FLAG;
 
   ret = bind(s, (struct sockaddr *)&addr, sizeof(addr));
   if (ret < 0)
diff --git linux-libre-6.12-gnu/Documentation/networking/mptcp-sysctl.rst linux-libre-6.12.44-gnu/Documentation/networking/mptcp-sysctl.rst
index 95598c21fc8e..09be0e68b9af 100644
--- linux-libre-6.12-gnu/Documentation/networking/mptcp-sysctl.rst
+++ linux-libre-6.12.44-gnu/Documentation/networking/mptcp-sysctl.rst
@@ -12,6 +12,8 @@ add_addr_timeout - INTEGER (seconds)
 	resent to an MPTCP peer that has not acknowledged a previous
 	ADD_ADDR message.
 
+	Do not retransmit if set to 0.
+
 	The default value matches TCP_RTO_MAX. This is a per-namespace
 	sysctl.
 
diff --git linux-libre-6.12-gnu/Documentation/networking/strparser.rst linux-libre-6.12.44-gnu/Documentation/networking/strparser.rst
index 6cab1f74ae05..7f623d1db72a 100644
--- linux-libre-6.12-gnu/Documentation/networking/strparser.rst
+++ linux-libre-6.12.44-gnu/Documentation/networking/strparser.rst
@@ -112,7 +112,7 @@ Functions
 Callbacks
 =========
 
-There are six callbacks:
+There are seven callbacks:
 
     ::
 
@@ -182,6 +182,13 @@ There are six callbacks:
     the length of the message. skb->len - offset may be greater
     then full_len since strparser does not trim the skb.
 
+    ::
+
+	int (*read_sock)(struct strparser *strp, read_descriptor_t *desc,
+                     sk_read_actor_t recv_actor);
+
+    The read_sock callback is used by strparser instead of
+    sock->ops->read_sock, if provided.
     ::
 
 	int (*read_sock_done)(struct strparser *strp, int err);
diff --git linux-libre-6.12-gnu/Documentation/power/runtime_pm.rst linux-libre-6.12.44-gnu/Documentation/power/runtime_pm.rst
index 53d1996460ab..12f429359a82 100644
--- linux-libre-6.12-gnu/Documentation/power/runtime_pm.rst
+++ linux-libre-6.12.44-gnu/Documentation/power/runtime_pm.rst
@@ -347,7 +347,9 @@ drivers/base/power/runtime.c and include/linux/pm_runtime.h:
 
   `int pm_runtime_resume_and_get(struct device *dev);`
     - run pm_runtime_resume(dev) and if successful, increment the device's
-      usage counter; return the result of pm_runtime_resume
+      usage counter; returns 0 on success (whether or not the device's
+      runtime PM status was already 'active') or the error code from
+      pm_runtime_resume() on failure.
 
   `int pm_request_idle(struct device *dev);`
     - submit a request to execute the subsystem-level idle callback for the
diff --git linux-libre-6.12-gnu/Documentation/rust/coding-guidelines.rst linux-libre-6.12.44-gnu/Documentation/rust/coding-guidelines.rst
index 329b070a1d47..a2e326b42410 100644
--- linux-libre-6.12-gnu/Documentation/rust/coding-guidelines.rst
+++ linux-libre-6.12.44-gnu/Documentation/rust/coding-guidelines.rst
@@ -227,3 +227,149 @@ The equivalent in Rust may look like (ignoring documentation):
 That is, the equivalent of ``GPIO_LINE_DIRECTION_IN`` would be referred to as
 ``gpio::LineDirection::In``. In particular, it should not be named
 ``gpio::gpio_line_direction::GPIO_LINE_DIRECTION_IN``.
+
+
+Lints
+-----
+
+In Rust, it is possible to ``allow`` particular warnings (diagnostics, lints)
+locally, making the compiler ignore instances of a given warning within a given
+function, module, block, etc.
+
+It is similar to ``#pragma GCC diagnostic push`` + ``ignored`` + ``pop`` in C
+[#]_:
+
+.. code-block:: c
+
+	#pragma GCC diagnostic push
+	#pragma GCC diagnostic ignored "-Wunused-function"
+	static void f(void) {}
+	#pragma GCC diagnostic pop
+
+.. [#] In this particular case, the kernel's ``__{always,maybe}_unused``
+       attributes (C23's ``[[maybe_unused]]``) may be used; however, the example
+       is meant to reflect the equivalent lint in Rust discussed afterwards.
+
+But way less verbose:
+
+.. code-block:: rust
+
+	#[allow(dead_code)]
+	fn f() {}
+
+By that virtue, it makes it possible to comfortably enable more diagnostics by
+default (i.e. outside ``W=`` levels). In particular, those that may have some
+false positives but that are otherwise quite useful to keep enabled to catch
+potential mistakes.
+
+On top of that, Rust provides the ``expect`` attribute which takes this further.
+It makes the compiler warn if the warning was not produced. For instance, the
+following will ensure that, when ``f()`` is called somewhere, we will have to
+remove the attribute:
+
+.. code-block:: rust
+
+	#[expect(dead_code)]
+	fn f() {}
+
+If we do not, we get a warning from the compiler::
+
+	warning: this lint expectation is unfulfilled
+	 --> x.rs:3:10
+	  |
+	3 | #[expect(dead_code)]
+	  |          ^^^^^^^^^
+	  |
+	  = note: `#[warn(unfulfilled_lint_expectations)]` on by default
+
+This means that ``expect``\ s do not get forgotten when they are not needed, which
+may happen in several situations, e.g.:
+
+- Temporary attributes added while developing.
+
+- Improvements in lints in the compiler, Clippy or custom tools which may
+  remove a false positive.
+
+- When the lint is not needed anymore because it was expected that it would be
+  removed at some point, such as the ``dead_code`` example above.
+
+It also increases the visibility of the remaining ``allow``\ s and reduces the
+chance of misapplying one.
+
+Thus prefer ``expect`` over ``allow`` unless:
+
+- Conditional compilation triggers the warning in some cases but not others.
+
+  If there are only a few cases where the warning triggers (or does not
+  trigger) compared to the total number of cases, then one may consider using
+  a conditional ``expect`` (i.e. ``cfg_attr(..., expect(...))``). Otherwise,
+  it is likely simpler to just use ``allow``.
+
+- Inside macros, when the different invocations may create expanded code that
+  triggers the warning in some cases but not in others.
+
+- When code may trigger a warning for some architectures but not others, such
+  as an ``as`` cast to a C FFI type.
+
+As a more developed example, consider for instance this program:
+
+.. code-block:: rust
+
+	fn g() {}
+
+	fn main() {
+	    #[cfg(CONFIG_X)]
+	    g();
+	}
+
+Here, function ``g()`` is dead code if ``CONFIG_X`` is not set. Can we use
+``expect`` here?
+
+.. code-block:: rust
+
+	#[expect(dead_code)]
+	fn g() {}
+
+	fn main() {
+	    #[cfg(CONFIG_X)]
+	    g();
+	}
+
+This would emit a lint if ``CONFIG_X`` is set, since it is not dead code in that
+configuration. Therefore, in cases like this, we cannot use ``expect`` as-is.
+
+A simple possibility is using ``allow``:
+
+.. code-block:: rust
+
+	#[allow(dead_code)]
+	fn g() {}
+
+	fn main() {
+	    #[cfg(CONFIG_X)]
+	    g();
+	}
+
+An alternative would be using a conditional ``expect``:
+
+.. code-block:: rust
+
+	#[cfg_attr(not(CONFIG_X), expect(dead_code))]
+	fn g() {}
+
+	fn main() {
+	    #[cfg(CONFIG_X)]
+	    g();
+	}
+
+This would ensure that, if someone introduces another call to ``g()`` somewhere
+(e.g. unconditionally), then it would be spotted that it is not dead code
+anymore. However, the ``cfg_attr`` is more complex than a simple ``allow``.
+
+Therefore, it is likely that it is not worth using conditional ``expect``\ s when
+more than one or two configurations are involved or when the lint may be
+triggered due to non-local changes (such as ``dead_code``).
+
+For more information about diagnostics in Rust, please see:
+
+	https://doc.rust-lang.org/stable/reference/attributes/diagnostics.html
diff --git linux-libre-6.12-gnu/Documentation/rust/quick-start.rst linux-libre-6.12.44-gnu/Documentation/rust/quick-start.rst
index 2d107982c87b..ded0d0836aee 100644
--- linux-libre-6.12-gnu/Documentation/rust/quick-start.rst
+++ linux-libre-6.12.44-gnu/Documentation/rust/quick-start.rst
@@ -128,7 +128,7 @@ Rust standard library source
 ****************************
 
 The Rust standard library source is required because the build system will
-cross-compile ``core`` and ``alloc``.
+cross-compile ``core``.
 
 If ``rustup`` is being used, run::
 
diff --git linux-libre-6.12-gnu/Documentation/translations/it_IT/core-api/symbol-namespaces.rst linux-libre-6.12.44-gnu/Documentation/translations/it_IT/core-api/symbol-namespaces.rst
index 17abc25ee4c1..6657f82c0101 100644
--- linux-libre-6.12-gnu/Documentation/translations/it_IT/core-api/symbol-namespaces.rst
+++ linux-libre-6.12.44-gnu/Documentation/translations/it_IT/core-api/symbol-namespaces.rst
@@ -69,7 +69,7 @@ Per esempio per esportare tutti i simboli definiti in usb-common nello spazio
 dei nomi USB_COMMON, si può aggiungere la seguente linea in
 drivers/usb/common/Makefile::
 
-	ccflags-y += -DDEFAULT_SYMBOL_NAMESPACE=USB_COMMON
+	ccflags-y += -DDEFAULT_SYMBOL_NAMESPACE='"USB_COMMON"'
 
 Questo cambierà tutte le macro EXPORT_SYMBOL() ed EXPORT_SYMBOL_GPL(). Invece,
 un simbolo esportato con EXPORT_SYMBOL_NS() non verrà cambiato e il simbolo
@@ -79,7 +79,7 @@ Una seconda possibilità è quella di definire il simbolo di preprocessore
 direttamente nei file da compilare. L'esempio precedente diventerebbe::
 
 	#undef  DEFAULT_SYMBOL_NAMESPACE
-	#define DEFAULT_SYMBOL_NAMESPACE USB_COMMON
+	#define DEFAULT_SYMBOL_NAMESPACE "USB_COMMON"
 
 Questo va messo prima di un qualsiasi uso di EXPORT_SYMBOL.
 
diff --git linux-libre-6.12-gnu/Documentation/translations/zh_CN/core-api/symbol-namespaces.rst linux-libre-6.12.44-gnu/Documentation/translations/zh_CN/core-api/symbol-namespaces.rst
index bb16f0611046..f3e73834f7d7 100644
--- linux-libre-6.12-gnu/Documentation/translations/zh_CN/core-api/symbol-namespaces.rst
+++ linux-libre-6.12.44-gnu/Documentation/translations/zh_CN/core-api/symbol-namespaces.rst
@@ -66,7 +66,7 @@
 子系统的 ``Makefile`` 中定义默认命名空间。例如，如果要将usb-common中定义的所有符号导
 出到USB_COMMON命名空间，可以在drivers/usb/common/Makefile中添加这样一行::
 
-       ccflags-y += -DDEFAULT_SYMBOL_NAMESPACE=USB_COMMON
+       ccflags-y += -DDEFAULT_SYMBOL_NAMESPACE='"USB_COMMON"'
 
 这将影响所有 EXPORT_SYMBOL() 和 EXPORT_SYMBOL_GPL() 语句。当这个定义存在时，
 用EXPORT_SYMBOL_NS()导出的符号仍然会被导出到作为命名空间参数传递的命名空间中，
@@ -76,7 +76,7 @@
 成::
 
        #undef  DEFAULT_SYMBOL_NAMESPACE
-       #define DEFAULT_SYMBOL_NAMESPACE USB_COMMON
+       #define DEFAULT_SYMBOL_NAMESPACE "USB_COMMON"
 
 应置于相关编译单元中任何 EXPORT_SYMBOL 宏之前
 
diff --git linux-libre-6.12-gnu/Documentation/wmi/devices/msi-wmi-platform.rst linux-libre-6.12.44-gnu/Documentation/wmi/devices/msi-wmi-platform.rst
index 31a136942892..73197b31926a 100644
--- linux-libre-6.12-gnu/Documentation/wmi/devices/msi-wmi-platform.rst
+++ linux-libre-6.12.44-gnu/Documentation/wmi/devices/msi-wmi-platform.rst
@@ -138,6 +138,10 @@ input data, the meaning of which depends on the subfeature being accessed.
 The output buffer contains a single byte which signals success or failure (``0x00`` on failure)
 and 31 bytes of output data, the meaning if which depends on the subfeature being accessed.
 
+.. note::
+   The ACPI control method responsible for handling the WMI method calls is not thread-safe.
+   This is a firmware bug that needs to be handled inside the driver itself.
+
 WMI method Get_EC()
 -------------------
 
diff --git linux-libre-6.12-gnu/MAINTAINERS linux-libre-6.12.44-gnu/MAINTAINERS
index b878ddc99f94..d0f18fdba068 100644
--- linux-libre-6.12-gnu/MAINTAINERS
+++ linux-libre-6.12.44-gnu/MAINTAINERS
@@ -701,7 +701,7 @@ M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/radio/radio-aimslab*
 
 AIO
@@ -809,7 +809,7 @@ ALLWINNER A10 CSI DRIVER
 M:	Maxime Ripard <mripard@kernel.org>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml
 F:	drivers/media/platform/sunxi/sun4i-csi/
 
@@ -818,7 +818,7 @@ M:	Yong Deng <yong.deng@magewell.com>
 M:	Paul Kocialkowski <paul.kocialkowski@bootlin.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/allwinner,sun6i-a31-csi.yaml
 F:	drivers/media/platform/sunxi/sun6i-csi/
 
@@ -826,7 +826,7 @@ ALLWINNER A31 ISP DRIVER
 M:	Paul Kocialkowski <paul.kocialkowski@bootlin.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/allwinner,sun6i-a31-isp.yaml
 F:	drivers/staging/media/sunxi/sun6i-isp/
 F:	drivers/staging/media/sunxi/sun6i-isp/uapi/sun6i-isp-config.h
@@ -835,7 +835,7 @@ ALLWINNER A31 MIPI CSI-2 BRIDGE DRIVER
 M:	Paul Kocialkowski <paul.kocialkowski@bootlin.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/allwinner,sun6i-a31-mipi-csi2.yaml
 F:	drivers/media/platform/sunxi/sun6i-mipi-csi2/
 
@@ -3348,7 +3348,7 @@ ASAHI KASEI AK7375 LENS VOICE COIL DRIVER
 M:	Tianshu Qiu <tian.shu.qiu@intel.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/asahi-kasei,ak7375.yaml
 F:	drivers/media/i2c/ak7375.c
 
@@ -3765,7 +3765,7 @@ M:	Mauro Carvalho Chehab <mchehab@kernel.org>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/usb/dvb-usb-v2/az6007.c
 
 AZTECH FM RADIO RECEIVER DRIVER
@@ -3773,7 +3773,7 @@ M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/radio/radio-aztech*
 
 B43 WIRELESS DRIVER
@@ -3857,7 +3857,7 @@ M:	Fabien Dessenne <fabien.dessenne@foss.st.com>
 L:	linux-media@vger.kernel.org
 S:	Supported
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/platform/st/sti/bdisp
 
 BECKHOFF CX5020 ETHERCAT MASTER DRIVER
@@ -4865,7 +4865,7 @@ M:	Mauro Carvalho Chehab <mchehab@kernel.org>
 L:	linux-media@vger.kernel.org
 S:	Odd fixes
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/driver-api/media/drivers/bttv*
 F:	drivers/media/pci/bt8xx/bttv*
 
@@ -4979,13 +4979,13 @@ M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/radio/radio-cadet*
 
 CAFE CMOS INTEGRATED CAMERA CONTROLLER DRIVER
 L:	linux-media@vger.kernel.org
 S:	Orphan
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/admin-guide/media/cafe_ccic*
 F:	drivers/media/platform/marvell/
 
@@ -5169,7 +5169,7 @@ M:	Hans Verkuil <hverkuil-cisco@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Supported
 W:	http://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/ABI/testing/debugfs-cec-error-inj
 F:	Documentation/devicetree/bindings/media/cec/cec-common.yaml
 F:	Documentation/driver-api/media/cec-core.rst
@@ -5186,7 +5186,7 @@ M:	Hans Verkuil <hverkuil-cisco@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Supported
 W:	http://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/cec/cec-gpio.yaml
 F:	drivers/media/cec/platform/cec-gpio/
 
@@ -5393,7 +5393,7 @@ CHRONTEL CH7322 CEC DRIVER
 M:	Joe Tessler <jrt@google.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.yaml
 F:	drivers/media/cec/i2c/ch7322.c
 
@@ -5582,7 +5582,7 @@ M:	Hans Verkuil <hverkuil-cisco@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Supported
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/pci/cobalt/
 
 COCCINELLE/Semantic Patches (SmPL)
@@ -6026,7 +6026,7 @@ M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Odd Fixes
 W:	http://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/i2c/cs3308.c
 
 CS5535 Audio ALSA driver
@@ -6057,7 +6057,7 @@ M:	Andy Walls <awalls@md.metrocast.net>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/pci/cx18/
 F:	include/uapi/linux/ivtv*
 
@@ -6066,7 +6066,7 @@ M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/common/cx2341x*
 F:	include/media/drv-intf/cx2341x.h
 
@@ -6084,7 +6084,7 @@ M:	Mauro Carvalho Chehab <mchehab@kernel.org>
 L:	linux-media@vger.kernel.org
 S:	Odd fixes
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/driver-api/media/drivers/cx88*
 F:	drivers/media/pci/cx88/
 
@@ -6320,7 +6320,7 @@ DEINTERLACE DRIVERS FOR ALLWINNER H3
 M:	Jernej Skrabec <jernej.skrabec@gmail.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/allwinner,sun8i-h3-deinterlace.yaml
 F:	drivers/media/platform/sunxi/sun8i-di/
 
@@ -6447,7 +6447,7 @@ M:	Hugues Fruchet <hugues.fruchet@foss.st.com>
 L:	linux-media@vger.kernel.org
 S:	Supported
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/platform/st/sti/delta
 
 DENALI NAND DRIVER
@@ -6855,7 +6855,7 @@ DONGWOON DW9714 LENS VOICE COIL DRIVER
 M:	Sakari Ailus <sakari.ailus@linux.intel.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/dongwoon,dw9714.yaml
 F:	drivers/media/i2c/dw9714.c
 
@@ -6863,13 +6863,13 @@ DONGWOON DW9719 LENS VOICE COIL DRIVER
 M:	Daniel Scally <djrscally@gmail.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/i2c/dw9719.c
 
 DONGWOON DW9768 LENS VOICE COIL DRIVER
 L:	linux-media@vger.kernel.org
 S:	Orphan
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/dongwoon,dw9768.yaml
 F:	drivers/media/i2c/dw9768.c
 
@@ -6877,7 +6877,7 @@ DONGWOON DW9807 LENS VOICE COIL DRIVER
 M:	Sakari Ailus <sakari.ailus@linux.intel.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/dongwoon,dw9807-vcm.yaml
 F:	drivers/media/i2c/dw9807-vcm.c
 
@@ -7860,7 +7860,7 @@ DSBR100 USB FM RADIO DRIVER
 M:	Alexey Klimov <klimov.linux@gmail.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/radio/dsbr100.c
 
 DT3155 MEDIA DRIVER
@@ -7868,7 +7868,7 @@ M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Odd Fixes
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/pci/dt3155/
 
 DVB_USB_AF9015 MEDIA DRIVER
@@ -7913,7 +7913,7 @@ S:	Maintained
 W:	https://linuxtv.org
 W:	http://github.com/mkrufky
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/usb/dvb-usb/cxusb*
 
 DVB_USB_EC168 MEDIA DRIVER
@@ -8282,7 +8282,7 @@ M:	Mauro Carvalho Chehab <mchehab@kernel.org>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/admin-guide/media/em28xx*
 F:	drivers/media/usb/em28xx/
 
@@ -8578,7 +8578,7 @@ EXTRON DA HD 4K PLUS CEC DRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/cec/usb/extron-da-hd-4k-plus/
 
 EXYNOS DP DRIVER
@@ -9400,7 +9400,7 @@ GALAXYCORE GC2145 SENSOR DRIVER
 M:	Alain Volmat <alain.volmat@foss.st.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/galaxycore,gc2145.yaml
 F:	drivers/media/i2c/gc2145.c
 
@@ -9448,7 +9448,7 @@ M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/radio/radio-gemtek*
 
 GENERIC ARCHITECTURE TOPOLOGY
@@ -9830,56 +9830,56 @@ GS1662 VIDEO SERIALIZER
 M:	Charles-Antoine Couret <charles-antoine.couret@nexvision.fr>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/spi/gs1662.c
 
 GSPCA FINEPIX SUBDRIVER
 M:	Frank Zago <frank@zago.net>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/usb/gspca/finepix.c
 
 GSPCA GL860 SUBDRIVER
 M:	Olivier Lorin <o.lorin@laposte.net>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/usb/gspca/gl860/
 
 GSPCA M5602 SUBDRIVER
 M:	Erik Andren <erik.andren@gmail.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/usb/gspca/m5602/
 
 GSPCA PAC207 SONIXB SUBDRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Odd Fixes
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/usb/gspca/pac207.c
 
 GSPCA SN9C20X SUBDRIVER
 M:	Brian Johnson <brijohn@gmail.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/usb/gspca/sn9c20x.c
 
 GSPCA T613 SUBDRIVER
 M:	Leandro Costantino <lcostantino@gmail.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/usb/gspca/t613.c
 
 GSPCA USB WEBCAM DRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Odd Fixes
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/usb/gspca/
 
 GTP (GPRS Tunneling Protocol)
@@ -9996,7 +9996,7 @@ M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Odd Fixes
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/usb/hdpvr/
 
 HEWLETT PACKARD ENTERPRISE ILO CHIF DRIVER
@@ -10503,7 +10503,7 @@ M:	Jean-Christophe Trotin <jean-christophe.trotin@foss.st.com>
 L:	linux-media@vger.kernel.org
 S:	Supported
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/platform/st/sti/hva
 
 HWPOISON MEMORY FAILURE HANDLING
@@ -10531,7 +10531,7 @@ HYNIX HI556 SENSOR DRIVER
 M:	Sakari Ailus <sakari.ailus@linux.intel.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/i2c/hi556.c
 
 HYNIX HI846 SENSOR DRIVER
@@ -11502,7 +11502,7 @@ M:	Dan Scally <djrscally@gmail.com>
 R:	Tianshu Qiu <tian.shu.qiu@intel.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/userspace-api/media/v4l/pixfmt-srggb10-ipu3.rst
 F:	drivers/media/pci/intel/ipu3/
 
@@ -11523,7 +11523,7 @@ M:	Bingbu Cao <bingbu.cao@intel.com>
 R:	Tianshu Qiu <tian.shu.qiu@intel.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/admin-guide/media/ipu6-isys.rst
 F:	drivers/media/pci/intel/ipu6/
 
@@ -12036,7 +12036,7 @@ M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/radio/radio-isa*
 
 ISAPNP
@@ -12138,7 +12138,7 @@ M:	Andy Walls <awalls@md.metrocast.net>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/admin-guide/media/ivtv*
 F:	drivers/media/pci/ivtv/
 F:	include/uapi/linux/ivtv*
@@ -12286,7 +12286,7 @@ M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/radio/radio-keene*
 
 KERNEL AUTOMOUNTER
@@ -13573,7 +13573,7 @@ MA901 MASTERKIT USB FM RADIO DRIVER
 M:	Alexey Klimov <klimov.linux@gmail.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/radio/radio-ma901.c
 
 MAC80211
@@ -13868,7 +13868,7 @@ MAX2175 SDR TUNER DRIVER
 M:	Ramesh Shanmugasundaram <rashanmu@gmail.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/max2175.txt
 F:	Documentation/userspace-api/media/drivers/max2175.rst
 F:	drivers/media/i2c/max2175*
@@ -14048,7 +14048,7 @@ M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/radio/radio-maxiradio*
 
 MAXLINEAR ETHERNET PHY DRIVER
@@ -14131,7 +14131,7 @@ M:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
 L:	linux-media@vger.kernel.org
 S:	Supported
 W:	https://www.linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/mc/
 F:	include/media/media-*.h
 F:	include/uapi/linux/media.h
@@ -14140,7 +14140,7 @@ MEDIA DRIVER FOR FREESCALE IMX PXP
 M:	Philipp Zabel <p.zabel@pengutronix.de>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/platform/nxp/imx-pxp.[ch]
 
 MEDIA DRIVERS FOR ASCOT2E
@@ -14149,7 +14149,7 @@ L:	linux-media@vger.kernel.org
 S:	Supported
 W:	https://linuxtv.org
 W:	http://netup.tv/
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/dvb-frontends/ascot2e*
 
 MEDIA DRIVERS FOR CXD2099AR CI CONTROLLERS
@@ -14157,7 +14157,7 @@ M:	Jasmin Jessich <jasmin@anw.at>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/dvb-frontends/cxd2099*
 
 MEDIA DRIVERS FOR CXD2841ER
@@ -14166,7 +14166,7 @@ L:	linux-media@vger.kernel.org
 S:	Supported
 W:	https://linuxtv.org
 W:	http://netup.tv/
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/dvb-frontends/cxd2841er*
 
 MEDIA DRIVERS FOR CXD2880
@@ -14174,7 +14174,7 @@ M:	Yasunari Takiguchi <Yasunari.Takiguchi@sony.com>
 L:	linux-media@vger.kernel.org
 S:	Supported
 W:	http://linuxtv.org/
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/dvb-frontends/cxd2880/*
 F:	drivers/media/spi/cxd2880*
 
@@ -14182,7 +14182,7 @@ MEDIA DRIVERS FOR DIGITAL DEVICES PCIE DEVICES
 L:	linux-media@vger.kernel.org
 S:	Orphan
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/pci/ddbridge/*
 
 MEDIA DRIVERS FOR FREESCALE IMX
@@ -14190,7 +14190,7 @@ M:	Steve Longerbeam <slongerbeam@gmail.com>
 M:	Philipp Zabel <p.zabel@pengutronix.de>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/admin-guide/media/imx.rst
 F:	Documentation/devicetree/bindings/media/imx.txt
 F:	drivers/staging/media/imx/
@@ -14204,7 +14204,7 @@ M:	Martin Kepplinger <martin.kepplinger@puri.sm>
 R:	Purism Kernel Team <kernel@puri.sm>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/admin-guide/media/imx7.rst
 F:	Documentation/devicetree/bindings/media/nxp,imx-mipi-csi2.yaml
 F:	Documentation/devicetree/bindings/media/nxp,imx7-csi.yaml
@@ -14219,7 +14219,7 @@ L:	linux-media@vger.kernel.org
 S:	Supported
 W:	https://linuxtv.org
 W:	http://netup.tv/
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/dvb-frontends/helene*
 
 MEDIA DRIVERS FOR HORUS3A
@@ -14228,7 +14228,7 @@ L:	linux-media@vger.kernel.org
 S:	Supported
 W:	https://linuxtv.org
 W:	http://netup.tv/
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/dvb-frontends/horus3a*
 
 MEDIA DRIVERS FOR LNBH25
@@ -14237,14 +14237,14 @@ L:	linux-media@vger.kernel.org
 S:	Supported
 W:	https://linuxtv.org
 W:	http://netup.tv/
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/dvb-frontends/lnbh25*
 
 MEDIA DRIVERS FOR MXL5XX TUNER DEMODULATORS
 L:	linux-media@vger.kernel.org
 S:	Orphan
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/dvb-frontends/mxl5xx*
 
 MEDIA DRIVERS FOR NETUP PCI UNIVERSAL DVB devices
@@ -14253,7 +14253,7 @@ L:	linux-media@vger.kernel.org
 S:	Supported
 W:	https://linuxtv.org
 W:	http://netup.tv/
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/pci/netup_unidvb/*
 
 MEDIA DRIVERS FOR NVIDIA TEGRA - VDE
@@ -14261,7 +14261,7 @@ M:	Dmitry Osipenko <digetx@gmail.com>
 L:	linux-media@vger.kernel.org
 L:	linux-tegra@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/nvidia,tegra-vde.yaml
 F:	drivers/media/platform/nvidia/tegra-vde/
 
@@ -14270,7 +14270,7 @@ M:	Jacopo Mondi <jacopo@jmondi.org>
 L:	linux-media@vger.kernel.org
 L:	linux-renesas-soc@vger.kernel.org
 S:	Supported
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/renesas,ceu.yaml
 F:	drivers/media/platform/renesas/renesas-ceu.c
 F:	include/media/drv-intf/renesas-ceu.h
@@ -14280,7 +14280,7 @@ M:	Fabrizio Castro <fabrizio.castro.jz@renesas.com>
 L:	linux-media@vger.kernel.org
 L:	linux-renesas-soc@vger.kernel.org
 S:	Supported
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/renesas,drif.yaml
 F:	drivers/media/platform/renesas/rcar_drif.c
 
@@ -14289,7 +14289,7 @@ M:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
 L:	linux-media@vger.kernel.org
 L:	linux-renesas-soc@vger.kernel.org
 S:	Supported
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/renesas,fcp.yaml
 F:	drivers/media/platform/renesas/rcar-fcp.c
 F:	include/media/rcar-fcp.h
@@ -14299,7 +14299,7 @@ M:	Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
 L:	linux-media@vger.kernel.org
 L:	linux-renesas-soc@vger.kernel.org
 S:	Supported
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/renesas,fdp1.yaml
 F:	drivers/media/platform/renesas/rcar_fdp1.c
 
@@ -14308,7 +14308,7 @@ M:	Niklas Söderlund <niklas.soderlund@ragnatech.se>
 L:	linux-media@vger.kernel.org
 L:	linux-renesas-soc@vger.kernel.org
 S:	Supported
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/renesas,csi2.yaml
 F:	Documentation/devicetree/bindings/media/renesas,isp.yaml
 F:	Documentation/devicetree/bindings/media/renesas,vin.yaml
@@ -14322,7 +14322,7 @@ M:	Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
 L:	linux-media@vger.kernel.org
 L:	linux-renesas-soc@vger.kernel.org
 S:	Supported
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/renesas,vsp1.yaml
 F:	drivers/media/platform/renesas/vsp1/
 
@@ -14330,14 +14330,14 @@ MEDIA DRIVERS FOR ST STV0910 DEMODULATOR ICs
 L:	linux-media@vger.kernel.org
 S:	Orphan
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/dvb-frontends/stv0910*
 
 MEDIA DRIVERS FOR ST STV6111 TUNER ICs
 L:	linux-media@vger.kernel.org
 S:	Orphan
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/dvb-frontends/stv6111*
 
 MEDIA DRIVERS FOR STM32 - DCMI / DCMIPP
@@ -14345,7 +14345,7 @@ M:	Hugues Fruchet <hugues.fruchet@foss.st.com>
 M:	Alain Volmat <alain.volmat@foss.st.com>
 L:	linux-media@vger.kernel.org
 S:	Supported
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml
 F:	Documentation/devicetree/bindings/media/st,stm32-dcmipp.yaml
 F:	drivers/media/platform/st/stm32/stm32-dcmi.c
@@ -14357,7 +14357,7 @@ L:	linux-media@vger.kernel.org
 S:	Maintained
 W:	https://linuxtv.org
 Q:	http://patchwork.kernel.org/project/linux-media/list/
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/admin-guide/media/
 F:	Documentation/devicetree/bindings/media/
 F:	Documentation/driver-api/media/
@@ -14933,7 +14933,7 @@ L:	linux-media@vger.kernel.org
 L:	linux-amlogic@lists.infradead.org
 S:	Supported
 W:	http://linux-meson.com/
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/cec/amlogic,meson-gx-ao-cec.yaml
 F:	drivers/media/cec/platform/meson/ao-cec-g12a.c
 F:	drivers/media/cec/platform/meson/ao-cec.c
@@ -14943,7 +14943,7 @@ M:	Neil Armstrong <neil.armstrong@linaro.org>
 L:	linux-media@vger.kernel.org
 L:	linux-amlogic@lists.infradead.org
 S:	Supported
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/amlogic,axg-ge2d.yaml
 F:	drivers/media/platform/amlogic/meson-ge2d/
 
@@ -14959,7 +14959,7 @@ M:	Neil Armstrong <neil.armstrong@linaro.org>
 L:	linux-media@vger.kernel.org
 L:	linux-amlogic@lists.infradead.org
 S:	Supported
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml
 F:	drivers/staging/media/meson/vdec/
 
@@ -15557,7 +15557,7 @@ M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Odd Fixes
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/radio/radio-miropcm20*
 
 MITSUMI MM8013 FG DRIVER
@@ -15709,7 +15709,7 @@ MR800 AVERMEDIA USB FM RADIO DRIVER
 M:	Alexey Klimov <klimov.linux@gmail.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/radio/radio-mr800.c
 
 MRF24J40 IEEE 802.15.4 RADIO DRIVER
@@ -15776,7 +15776,7 @@ MT9M114 ONSEMI SENSOR DRIVER
 M:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/onnn,mt9m114.yaml
 F:	drivers/media/i2c/mt9m114.c
 
@@ -15784,7 +15784,7 @@ MT9P031 APTINA CAMERA SENSOR
 M:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/aptina,mt9p031.yaml
 F:	drivers/media/i2c/mt9p031.c
 F:	include/media/i2c/mt9p031.h
@@ -15793,7 +15793,7 @@ MT9T112 APTINA CAMERA SENSOR
 M:	Jacopo Mondi <jacopo@jmondi.org>
 L:	linux-media@vger.kernel.org
 S:	Odd Fixes
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/i2c/mt9t112.c
 F:	include/media/i2c/mt9t112.h
 
@@ -15801,7 +15801,7 @@ MT9V032 APTINA CAMERA SENSOR
 M:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/mt9v032.txt
 F:	drivers/media/i2c/mt9v032.c
 F:	include/media/i2c/mt9v032.h
@@ -15810,7 +15810,7 @@ MT9V111 APTINA CAMERA SENSOR
 M:	Jacopo Mondi <jacopo@jmondi.org>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.yaml
 F:	drivers/media/i2c/mt9v111.c
 
@@ -17005,13 +17005,13 @@ OMNIVISION OV01A10 SENSOR DRIVER
 M:	Bingbu Cao <bingbu.cao@intel.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/i2c/ov01a10.c
 
 OMNIVISION OV02A10 SENSOR DRIVER
 L:	linux-media@vger.kernel.org
 S:	Orphan
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/ovti,ov02a10.yaml
 F:	drivers/media/i2c/ov02a10.c
 
@@ -17019,28 +17019,28 @@ OMNIVISION OV08D10 SENSOR DRIVER
 M:	Jimmy Su <jimmy.su@intel.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/i2c/ov08d10.c
 
 OMNIVISION OV08X40 SENSOR DRIVER
 M:	Jason Chen <jason.z.chen@intel.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/i2c/ov08x40.c
 
 OMNIVISION OV13858 SENSOR DRIVER
 M:	Sakari Ailus <sakari.ailus@linux.intel.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/i2c/ov13858.c
 
 OMNIVISION OV13B10 SENSOR DRIVER
 M:	Arec Kao <arec.kao@intel.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/i2c/ov13b10.c
 
 OMNIVISION OV2680 SENSOR DRIVER
@@ -17048,7 +17048,7 @@ M:	Rui Miguel Silva <rmfrfs@gmail.com>
 M:	Hans de Goede <hansg@kernel.org>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/ovti,ov2680.yaml
 F:	drivers/media/i2c/ov2680.c
 
@@ -17056,7 +17056,7 @@ OMNIVISION OV2685 SENSOR DRIVER
 M:	Shunqian Zheng <zhengsq@rock-chips.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/ovti,ov2685.yaml
 F:	drivers/media/i2c/ov2685.c
 
@@ -17066,14 +17066,14 @@ R:	Sakari Ailus <sakari.ailus@linux.intel.com>
 R:	Bingbu Cao <bingbu.cao@intel.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/i2c/ov2740.c
 
 OMNIVISION OV4689 SENSOR DRIVER
 M:	Mikhail Rudenko <mike.rudenko@gmail.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/ovti,ov4689.yaml
 F:	drivers/media/i2c/ov4689.c
 
@@ -17081,7 +17081,7 @@ OMNIVISION OV5640 SENSOR DRIVER
 M:	Steve Longerbeam <slongerbeam@gmail.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/i2c/ov5640.c
 
 OMNIVISION OV5647 SENSOR DRIVER
@@ -17089,7 +17089,7 @@ M:	Dave Stevenson <dave.stevenson@raspberrypi.com>
 M:	Jacopo Mondi <jacopo@jmondi.org>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/ovti,ov5647.yaml
 F:	drivers/media/i2c/ov5647.c
 
@@ -17097,7 +17097,7 @@ OMNIVISION OV5670 SENSOR DRIVER
 M:	Sakari Ailus <sakari.ailus@linux.intel.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/ovti,ov5670.yaml
 F:	drivers/media/i2c/ov5670.c
 
@@ -17105,7 +17105,7 @@ OMNIVISION OV5675 SENSOR DRIVER
 M:	Sakari Ailus <sakari.ailus@linux.intel.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/ovti,ov5675.yaml
 F:	drivers/media/i2c/ov5675.c
 
@@ -17113,7 +17113,7 @@ OMNIVISION OV5693 SENSOR DRIVER
 M:	Daniel Scally <djrscally@gmail.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/ovti,ov5693.yaml
 F:	drivers/media/i2c/ov5693.c
 
@@ -17121,21 +17121,21 @@ OMNIVISION OV5695 SENSOR DRIVER
 M:	Shunqian Zheng <zhengsq@rock-chips.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/i2c/ov5695.c
 
 OMNIVISION OV64A40 SENSOR DRIVER
 M:	Jacopo Mondi <jacopo.mondi@ideasonboard.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/ovti,ov64a40.yaml
 F:	drivers/media/i2c/ov64a40.c
 
 OMNIVISION OV7670 SENSOR DRIVER
 L:	linux-media@vger.kernel.org
 S:	Orphan
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/ov7670.txt
 F:	drivers/media/i2c/ov7670.c
 
@@ -17143,7 +17143,7 @@ OMNIVISION OV772x SENSOR DRIVER
 M:	Jacopo Mondi <jacopo@jmondi.org>
 L:	linux-media@vger.kernel.org
 S:	Odd fixes
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/ovti,ov772x.yaml
 F:	drivers/media/i2c/ov772x.c
 F:	include/media/i2c/ov772x.h
@@ -17151,7 +17151,7 @@ F:	include/media/i2c/ov772x.h
 OMNIVISION OV7740 SENSOR DRIVER
 L:	linux-media@vger.kernel.org
 S:	Orphan
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/ov7740.txt
 F:	drivers/media/i2c/ov7740.c
 
@@ -17159,7 +17159,7 @@ OMNIVISION OV8856 SENSOR DRIVER
 M:	Sakari Ailus <sakari.ailus@linux.intel.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/ovti,ov8856.yaml
 F:	drivers/media/i2c/ov8856.c
 
@@ -17168,7 +17168,7 @@ M:	Jacopo Mondi <jacopo.mondi@ideasonboard.com>
 M:	Nicholas Roth <nicholas@rothemail.net>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/ovti,ov8858.yaml
 F:	drivers/media/i2c/ov8858.c
 
@@ -17176,7 +17176,7 @@ OMNIVISION OV9282 SENSOR DRIVER
 M:	Dave Stevenson <dave.stevenson@raspberrypi.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/ovti,ov9282.yaml
 F:	drivers/media/i2c/ov9282.c
 
@@ -17192,7 +17192,7 @@ R:	Akinobu Mita <akinobu.mita@gmail.com>
 R:	Sylwester Nawrocki <s.nawrocki@samsung.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/ov9650.txt
 F:	drivers/media/i2c/ov9650.c
 
@@ -17201,7 +17201,7 @@ M:	Tianshu Qiu <tian.shu.qiu@intel.com>
 R:	Bingbu Cao <bingbu.cao@intel.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/i2c/ov9734.c
 
 ONBOARD USB HUB DRIVER
@@ -17503,7 +17503,7 @@ F:	include/uapi/linux/ppdev.h
 PARAVIRT_OPS INTERFACE
 M:	Juergen Gross <jgross@suse.com>
 R:	Ajay Kaher <ajay.kaher@broadcom.com>
-R:	Alexey Makhalov <alexey.amakhalov@broadcom.com>
+R:	Alexey Makhalov <alexey.makhalov@broadcom.com>
 R:	Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
 L:	virtualization@lists.linux.dev
 L:	x86@kernel.org
@@ -18646,7 +18646,7 @@ PULSE8-CEC DRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/cec/usb/pulse8/
 
 PURELIFI PLFXLC DRIVER
@@ -18661,7 +18661,7 @@ L:	pvrusb2@isely.net	(subscribers-only)
 L:	linux-media@vger.kernel.org
 S:	Maintained
 W:	http://www.isely.net/pvrusb2/
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/driver-api/media/drivers/pvrusb2*
 F:	drivers/media/usb/pvrusb2/
 
@@ -18669,7 +18669,7 @@ PWC WEBCAM DRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Odd Fixes
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/usb/pwc/*
 F:	include/trace/events/pwc.h
 
@@ -19173,7 +19173,7 @@ R:	Bryan O'Donoghue <bryan.odonoghue@linaro.org>
 L:	linux-media@vger.kernel.org
 L:	linux-arm-msm@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/*venus*
 F:	drivers/media/platform/qcom/venus/
 
@@ -19218,14 +19218,14 @@ RADIOSHARK RADIO DRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/radio/radio-shark.c
 
 RADIOSHARK2 RADIO DRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/radio/radio-shark2.c
 F:	drivers/media/radio/radio-tea5777.c
 
@@ -19249,7 +19249,7 @@ RAINSHADOW-CEC DRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/cec/usb/rainshadow/
 
 RALINK MIPS ARCHITECTURE
@@ -19333,7 +19333,7 @@ M:	Sean Young <sean@mess.org>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 W:	http://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/driver-api/media/rc-core.rst
 F:	Documentation/userspace-api/media/rc/
 F:	drivers/media/rc/
@@ -20077,7 +20077,7 @@ ROTATION DRIVER FOR ALLWINNER A83T
 M:	Jernej Skrabec <jernej.skrabec@gmail.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/allwinner,sun8i-a83t-de2-rotate.yaml
 F:	drivers/media/platform/sunxi/sun8i-rotate/
 
@@ -20175,6 +20175,7 @@ B:	https://github.com/Rust-for-Linux/linux/issues
 C:	zulip://rust-for-linux.zulipchat.com
 P:	https://rust-for-linux.com/contributing
 T:	git https://github.com/Rust-for-Linux/linux.git rust-next
+F:	.clippy.toml
 F:	Documentation/rust/
 F:	rust/
 F:	samples/rust/
@@ -20182,6 +20183,13 @@ F:	scripts/*rust*
 F:	tools/testing/selftests/rust/
 K:	\b(?i:rust)\b
 
+RUST [ALLOC]
+M:	Danilo Krummrich <dakr@kernel.org>
+L:	rust-for-linux@vger.kernel.org
+S:	Maintained
+F:	rust/kernel/alloc.rs
+F:	rust/kernel/alloc/
+
 RXRPC SOCKETS (AF_RXRPC)
 M:	David Howells <dhowells@redhat.com>
 M:	Marc Dionne <marc.dionne@auristor.com>
@@ -20331,7 +20339,7 @@ M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Odd Fixes
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/i2c/saa658