diff --git linux-libre-6.12-gnu/.clippy.toml linux-libre-6.12.79-gnu/.clippy.toml
new file mode 100644
index 000000000000..137f41d203de
--- /dev/null
+++ linux-libre-6.12.79-gnu/.clippy.toml
@@ -0,0 +1,11 @@
+# SPDX-License-Identifier: GPL-2.0
+
+msrv = "1.78.0"
+
+check-private-items = true
+
+disallowed-macros = [
+    # The `clippy::dbg_macro` lint only works with `std::dbg!`, thus we simulate
+    # it here, see: https://github.com/rust-lang/rust-clippy/issues/11303.
+    { path = "kernel::dbg", reason = "the `dbg!` macro is intended as a debugging tool", allow-invalid = true },
+]
diff --git linux-libre-6.12-gnu/.gitignore linux-libre-6.12.79-gnu/.gitignore
index 56972adb5031..a61e4778d011 100644
--- linux-libre-6.12-gnu/.gitignore
+++ linux-libre-6.12.79-gnu/.gitignore
@@ -103,6 +103,7 @@ modules.order
 # We don't want to ignore the following even if they are dot-files
 #
 !.clang-format
+!.clippy.toml
 !.cocciconfig
 !.editorconfig
 !.get_maintainer.ignore
diff --git linux-libre-6.12-gnu/Documentation/ABI/testing/sysfs-bus-pci linux-libre-6.12.79-gnu/Documentation/ABI/testing/sysfs-bus-pci
index 7f63c7e97773..5da6a14dc326 100644
--- linux-libre-6.12-gnu/Documentation/ABI/testing/sysfs-bus-pci
+++ linux-libre-6.12.79-gnu/Documentation/ABI/testing/sysfs-bus-pci
@@ -163,6 +163,17 @@ Description:
 		will be present in sysfs.  Writing 1 to this file
 		will perform reset.
 
+What:		/sys/bus/pci/devices/.../reset_subordinate
+Date:		October 2024
+Contact:	linux-pci@vger.kernel.org
+Description:
+		This is visible only for bridge devices. If you want to reset
+		all devices attached through the subordinate bus of a specific
+		bridge device, writing 1 to this will try to do it.  This will
+		affect all devices attached to the system through this bridge
+		similiar to writing 1 to their individual "reset" file, so use
+		with caution.
+
 What:		/sys/bus/pci/devices/.../vpd
 Date:		February 2008
 Contact:	Ben Hutchings <bwh@kernel.org>
diff --git linux-libre-6.12-gnu/Documentation/ABI/testing/sysfs-devices-system-cpu linux-libre-6.12.79-gnu/Documentation/ABI/testing/sysfs-devices-system-cpu
index 206079d3bd5b..28f062dc25e1 100644
--- linux-libre-6.12-gnu/Documentation/ABI/testing/sysfs-devices-system-cpu
+++ linux-libre-6.12.79-gnu/Documentation/ABI/testing/sysfs-devices-system-cpu
@@ -511,6 +511,7 @@ Description:	information about CPUs heterogeneity.
 
 What:		/sys/devices/system/cpu/vulnerabilities
 		/sys/devices/system/cpu/vulnerabilities/gather_data_sampling
+		/sys/devices/system/cpu/vulnerabilities/indirect_target_selection
 		/sys/devices/system/cpu/vulnerabilities/itlb_multihit
 		/sys/devices/system/cpu/vulnerabilities/l1tf
 		/sys/devices/system/cpu/vulnerabilities/mds
@@ -522,7 +523,9 @@ What:		/sys/devices/system/cpu/vulnerabilities
 		/sys/devices/system/cpu/vulnerabilities/spectre_v1
 		/sys/devices/system/cpu/vulnerabilities/spectre_v2
 		/sys/devices/system/cpu/vulnerabilities/srbds
+		/sys/devices/system/cpu/vulnerabilities/tsa
 		/sys/devices/system/cpu/vulnerabilities/tsx_async_abort
+		/sys/devices/system/cpu/vulnerabilities/vmscape
 Date:		January 2018
 Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
 Description:	Information about CPU vulnerabilities
diff --git linux-libre-6.12-gnu/Documentation/ABI/testing/sysfs-driver-ufs linux-libre-6.12.79-gnu/Documentation/ABI/testing/sysfs-driver-ufs
index 5fa6655aee84..16f17e91ee49 100644
--- linux-libre-6.12-gnu/Documentation/ABI/testing/sysfs-driver-ufs
+++ linux-libre-6.12.79-gnu/Documentation/ABI/testing/sysfs-driver-ufs
@@ -711,7 +711,7 @@ Description:	This file shows the thin provisioning type. This is one of
 
 		The file is read only.
 
-What:		/sys/class/scsi_device/*/device/unit_descriptor/physical_memory_resourse_count
+What:		/sys/class/scsi_device/*/device/unit_descriptor/physical_memory_resource_count
 Date:		February 2018
 Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows the total physical memory resources. This is
diff --git linux-libre-6.12-gnu/Documentation/ABI/testing/sysfs-fs-f2fs linux-libre-6.12.79-gnu/Documentation/ABI/testing/sysfs-fs-f2fs
index fdedf1ea944b..912d6e862808 100644
--- linux-libre-6.12-gnu/Documentation/ABI/testing/sysfs-fs-f2fs
+++ linux-libre-6.12.79-gnu/Documentation/ABI/testing/sysfs-fs-f2fs
@@ -311,10 +311,13 @@ Description:	Do background GC aggressively when set. Set to 0 by default.
 		GC approach and turns SSR mode on.
 		gc urgent low(2): lowers the bar of checking I/O idling in
 		order to process outstanding discard commands and GC a
-		little bit aggressively. uses cost benefit GC approach.
+		little bit aggressively. always uses cost benefit GC approach,
+		and will override age-threshold GC approach if ATGC is enabled
+		at the same time.
 		gc urgent mid(3): does GC forcibly in a period of given
 		gc_urgent_sleep_time and executes a mid level of I/O idling check.
-		uses cost benefit GC approach.
+		always uses cost benefit GC approach, and will override
+		age-threshold GC approach if ATGC is enabled at the same time.
 
 What:		/sys/fs/f2fs/<disk>/gc_urgent_sleep_time
 Date:		August 2017
@@ -819,3 +822,61 @@ Description:	It controls the valid block ratio threshold not to trigger excessiv
 		for zoned deivces. The initial value of it is 95(%). F2FS will stop the
 		background GC thread from intiating GC for sections having valid blocks
 		exceeding the ratio.
+
+What:		/sys/fs/f2fs/<disk>/max_read_extent_count
+Date:		November 2024
+Contact:	"Chao Yu" <chao@kernel.org>
+Description:	It controls max read extent count for per-inode, the value of threshold
+		is 10240 by default.
+
+What:		/sys/fs/f2fs/tuning/reclaim_caches_kb
+Date:		February 2025
+Contact:	"Jaegeuk Kim" <jaegeuk@kernel.org>
+Description:	It reclaims the given KBs of file-backed pages registered by
+		ioctl(F2FS_IOC_DONATE_RANGE).
+		For example, writing N tries to drop N KBs spaces in LRU.
+
+What:		/sys/fs/f2fs/<disk>/carve_out
+Date:		March 2025
+Contact:	"Daeho Jeong" <daehojeong@google.com>
+Description:	For several zoned storage devices, vendors will provide extra space which
+		was used for device level GC than specs and F2FS can use this space for
+		filesystem level GC. To do that, we can reserve the space using
+		reserved_blocks. However, it is not enough, since this extra space should
+		not be shown to users. So, with this new sysfs node, we can hide the space
+		by substracting reserved_blocks from total bytes.
+
+What:		/sys/fs/f2fs/<disk>/encoding_flags
+Date:		April 2025
+Contact:	"Chao Yu" <chao@kernel.org>
+Description:	This is a read-only entry to show the value of sb.s_encoding_flags, the
+		value is hexadecimal.
+
+		============================     ==========
+		Flag_Name                        Flag_Value
+		============================     ==========
+		SB_ENC_STRICT_MODE_FL            0x00000001
+		SB_ENC_NO_COMPAT_FALLBACK_FL     0x00000002
+		============================     ==========
+
+What:		/sys/fs/f2fs/<disk>/reserved_pin_section
+Date:		June 2025
+Contact:	"Chao Yu" <chao@kernel.org>
+Description:	This threshold is used to control triggering garbage collection while
+		fallocating on pinned file, so, it can guarantee there is enough free
+		reserved section before preallocating on pinned file.
+		By default, the value is ovp_sections, especially, for zoned ufs, the
+		value is 1.
+
+What:		/sys/fs/f2fs/<disk>/gc_boost_gc_multiple
+Date:		June 2025
+Contact:	"Daeho Jeong" <daehojeong@google.com>
+Description:	Set a multiplier for the background GC migration window when F2FS GC is
+		boosted. The range should be from 1 to the segment count in a section.
+		Default: 5
+
+What:		/sys/fs/f2fs/<disk>/gc_boost_gc_greedy
+Date:		June 2025
+Contact:	"Daeho Jeong" <daehojeong@google.com>
+Description:	Control GC algorithm for boost GC. 0: cost benefit, 1: greedy
+		Default: 1
diff --git linux-libre-6.12-gnu/Documentation/PCI/endpoint/pci-vntb-howto.rst linux-libre-6.12.79-gnu/Documentation/PCI/endpoint/pci-vntb-howto.rst
index 70d3bc90893f..949c0d35694c 100644
--- linux-libre-6.12-gnu/Documentation/PCI/endpoint/pci-vntb-howto.rst
+++ linux-libre-6.12.79-gnu/Documentation/PCI/endpoint/pci-vntb-howto.rst
@@ -52,14 +52,14 @@ pci-epf-vntb device, the following commands can be used::
 	# cd /sys/kernel/config/pci_ep/
 	# mkdir functions/pci_epf_vntb/func1
 
-The "mkdir func1" above creates the pci-epf-ntb function device that will
+The "mkdir func1" above creates the pci-epf-vntb function device that will
 be probed by pci_epf_vntb driver.
 
 The PCI endpoint framework populates the directory with the following
 configurable fields::
 
-	# ls functions/pci_epf_ntb/func1
-	baseclass_code    deviceid          msi_interrupts    pci-epf-ntb.0
+	# ls functions/pci_epf_vntb/func1
+	baseclass_code    deviceid          msi_interrupts    pci-epf-vntb.0
 	progif_code       secondary         subsys_id         vendorid
 	cache_line_size   interrupt_pin     msix_interrupts   primary
 	revid             subclass_code     subsys_vendor_id
@@ -106,13 +106,13 @@ A sample configuration for virtual NTB driver for virtual PCI bus::
 	# echo 0x080A > functions/pci_epf_vntb/func1/pci_epf_vntb.0/vntb_pid
 	# echo 0x10 > functions/pci_epf_vntb/func1/pci_epf_vntb.0/vbus_number
 
-Binding pci-epf-ntb Device to EP Controller
+Binding pci-epf-vntb Device to EP Controller
 --------------------------------------------
 
 NTB function device should be attached to PCI endpoint controllers
 connected to the host.
 
-	# ln -s controllers/5f010000.pcie_ep functions/pci-epf-ntb/func1/primary
+	# ln -s controllers/5f010000.pcie_ep functions/pci_epf_vntb/func1/primary
 
 Once the above step is completed, the PCI endpoint controllers are ready to
 establish a link with the host.
@@ -134,7 +134,7 @@ lspci Output at Host side
 -------------------------
 
 Note that the devices listed here correspond to the values populated in
-"Creating pci-epf-ntb Device" section above::
+"Creating pci-epf-vntb Device" section above::
 
 	# lspci
         00:00.0 PCI bridge: Freescale Semiconductor Inc Device 0000 (rev 01)
@@ -147,7 +147,7 @@ lspci Output at EP Side / Virtual PCI bus
 -----------------------------------------
 
 Note that the devices listed here correspond to the values populated in
-"Creating pci-epf-ntb Device" section above::
+"Creating pci-epf-vntb Device" section above::
 
         # lspci
         10:00.0 Unassigned class [ffff]: Dawicontrol Computersysteme GmbH Device 1234 (rev ff)
diff --git linux-libre-6.12-gnu/Documentation/RCU/stallwarn.rst linux-libre-6.12.79-gnu/Documentation/RCU/stallwarn.rst
index ca7b7cd806a1..30080ff6f406 100644
--- linux-libre-6.12-gnu/Documentation/RCU/stallwarn.rst
+++ linux-libre-6.12.79-gnu/Documentation/RCU/stallwarn.rst
@@ -249,7 +249,7 @@ ticks this GP)" indicates that this CPU has not taken any scheduling-clock
 interrupts during the current stalled grace period.
 
 The "idle=" portion of the message prints the dyntick-idle state.
-The hex number before the first "/" is the low-order 12 bits of the
+The hex number before the first "/" is the low-order 16 bits of the
 dynticks counter, which will have an even-numbered value if the CPU
 is in dyntick-idle mode and an odd-numbered value otherwise.  The hex
 number between the two "/"s is the value of the nesting, which will be
diff --git linux-libre-6.12-gnu/Documentation/accel/qaic/aic080.rst linux-libre-6.12.79-gnu/Documentation/accel/qaic/aic080.rst
new file mode 100644
index 000000000000..d563771ea6ce
--- /dev/null
+++ linux-libre-6.12.79-gnu/Documentation/accel/qaic/aic080.rst
@@ -0,0 +1,14 @@
+.. SPDX-License-Identifier: GPL-2.0-only
+
+===============================
+ Qualcomm Cloud AI 80 (AIC080)
+===============================
+
+Overview
+========
+
+The Qualcomm Cloud AI 80/AIC080 family of products are a derivative of AIC100.
+The number of NSPs and clock rates are reduced to fit within resource
+constrained solutions. The PCIe Product ID is 0xa080.
+
+As a derivative product, all AIC100 documentation applies.
diff --git linux-libre-6.12-gnu/Documentation/accel/qaic/index.rst linux-libre-6.12.79-gnu/Documentation/accel/qaic/index.rst
index ad19b88d1a66..967b9dd8bace 100644
--- linux-libre-6.12-gnu/Documentation/accel/qaic/index.rst
+++ linux-libre-6.12.79-gnu/Documentation/accel/qaic/index.rst
@@ -10,4 +10,5 @@ accelerator cards.
 .. toctree::
 
    qaic
+   aic080
    aic100
diff --git linux-libre-6.12-gnu/Documentation/admin-guide/LSM/Smack.rst linux-libre-6.12.79-gnu/Documentation/admin-guide/LSM/Smack.rst
index 6d44f4fdbf59..c5ed775f2d10 100644
--- linux-libre-6.12-gnu/Documentation/admin-guide/LSM/Smack.rst
+++ linux-libre-6.12.79-gnu/Documentation/admin-guide/LSM/Smack.rst
@@ -601,10 +601,15 @@ specification.
 Task Attribute
 ~~~~~~~~~~~~~~
 
-The Smack label of a process can be read from /proc/<pid>/attr/current. A
-process can read its own Smack label from /proc/self/attr/current. A
+The Smack label of a process can be read from ``/proc/<pid>/attr/current``. A
+process can read its own Smack label from ``/proc/self/attr/current``. A
 privileged process can change its own Smack label by writing to
-/proc/self/attr/current but not the label of another process.
+``/proc/self/attr/current`` but not the label of another process.
+
+Format of writing is : only the label or the label followed by one of the
+3 trailers: ``\n`` (by common agreement for ``/proc/...`` interfaces),
+``\0`` (because some applications incorrectly include it),
+``\n\0`` (because we think some applications may incorrectly include it).
 
 File Attribute
 ~~~~~~~~~~~~~~
@@ -696,6 +701,11 @@ sockets.
 	A privileged program may set this to match the label of another
 	task with which it hopes to communicate.
 
+UNIX domain socket (UDS) with a BSD address functions both as a file in a
+filesystem and as a socket. As a file, it carries the SMACK64 attribute. This
+attribute is not involved in Smack security enforcement and is immutably
+assigned the label "*".
+
 Smack Netlabel Exceptions
 ~~~~~~~~~~~~~~~~~~~~~~~~~
 
diff --git linux-libre-6.12-gnu/Documentation/admin-guide/blockdev/zram.rst linux-libre-6.12.79-gnu/Documentation/admin-guide/blockdev/zram.rst
index 678d70d6e1c3..714a5171bfc0 100644
--- linux-libre-6.12-gnu/Documentation/admin-guide/blockdev/zram.rst
+++ linux-libre-6.12.79-gnu/Documentation/admin-guide/blockdev/zram.rst
@@ -47,6 +47,8 @@ The list of possible return codes:
 -ENOMEM	  zram was not able to allocate enough memory to fulfil your
 	  needs.
 -EINVAL	  invalid input has been provided.
+-EAGAIN	  re-try operation later (e.g. when attempting to run recompress
+	  and writeback simultaneously).
 ========  =============================================================
 
 If you use 'echo', the returned value is set by the 'echo' utility,
diff --git linux-libre-6.12-gnu/Documentation/admin-guide/cgroup-v2.rst linux-libre-6.12.79-gnu/Documentation/admin-guide/cgroup-v2.rst
index 6d02168d78be..2cb58daf3089 100644
--- linux-libre-6.12-gnu/Documentation/admin-guide/cgroup-v2.rst
+++ linux-libre-6.12.79-gnu/Documentation/admin-guide/cgroup-v2.rst
@@ -2954,7 +2954,7 @@ following two functions.
 	a queue (device) has been associated with the bio and
 	before submission.
 
-  wbc_account_cgroup_owner(@wbc, @page, @bytes)
+  wbc_account_cgroup_owner(@wbc, @folio, @bytes)
 	Should be called for each data segment being written out.
 	While this function doesn't care exactly when it's called
 	during the writeback session, it's the easiest and most
diff --git linux-libre-6.12-gnu/Documentation/admin-guide/hw-vuln/index.rst linux-libre-6.12.79-gnu/Documentation/admin-guide/hw-vuln/index.rst
index ff0b440ef2dc..5d6c001b8a98 100644
--- linux-libre-6.12-gnu/Documentation/admin-guide/hw-vuln/index.rst
+++ linux-libre-6.12.79-gnu/Documentation/admin-guide/hw-vuln/index.rst
@@ -22,3 +22,5 @@ are configurable at compile, boot or run time.
    srso
    gather_data_sampling
    reg-file-data-sampling
+   indirect-target-selection
+   vmscape
diff --git linux-libre-6.12-gnu/Documentation/admin-guide/hw-vuln/indirect-target-selection.rst linux-libre-6.12.79-gnu/Documentation/admin-guide/hw-vuln/indirect-target-selection.rst
new file mode 100644
index 000000000000..52fed64bfb78
--- /dev/null
+++ linux-libre-6.12.79-gnu/Documentation/admin-guide/hw-vuln/indirect-target-selection.rst
@@ -0,0 +1,166 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Indirect Target Selection (ITS)
+===============================
+
+ITS is a vulnerability in some Intel CPUs that support Enhanced IBRS and were
+released before Alder Lake. ITS may allow an attacker to control the prediction
+of indirect branches and RETs located in the lower half of a cacheline.
+
+ITS is assigned CVE-2024-28956 with a CVSS score of 4.7 (Medium).
+
+Scope of Impact
+---------------
+- **eIBRS Guest/Host Isolation**: Indirect branches in KVM/kernel may still be
+  predicted with unintended target corresponding to a branch in the guest.
+
+- **Intra-Mode BTI**: In-kernel training such as through cBPF or other native
+  gadgets.
+
+- **Indirect Branch Prediction Barrier (IBPB)**: After an IBPB, indirect
+  branches may still be predicted with targets corresponding to direct branches
+  executed prior to the IBPB. /*(DEBLOBBED)*/
+
+Affected CPUs
+-------------
+Below is the list of ITS affected CPUs [#f2]_ [#f3]_:
+
+   ========================  ============  ====================  ===============
+   Common name               Family_Model  eIBRS                 Intra-mode BTI
+                                           Guest/Host Isolation
+   ========================  ============  ====================  ===============
+   SKYLAKE_X (step >= 6)     06_55H        Affected              Affected
+   ICELAKE_X                 06_6AH        Not affected          Affected
+   ICELAKE_D                 06_6CH        Not affected          Affected
+   ICELAKE_L                 06_7EH        Not affected          Affected
+   TIGERLAKE_L               06_8CH        Not affected          Affected
+   TIGERLAKE                 06_8DH        Not affected          Affected
+   KABYLAKE_L (step >= 12)   06_8EH        Affected              Affected
+   KABYLAKE (step >= 13)     06_9EH        Affected              Affected
+   COMETLAKE                 06_A5H        Affected              Affected
+   COMETLAKE_L               06_A6H        Affected              Affected
+   ROCKETLAKE                06_A7H        Not affected          Affected
+   ========================  ============  ====================  ===============
+
+- All affected CPUs enumerate Enhanced IBRS feature.
+- IBPB isolation is affected on all ITS affected CPUs, and need a microcode
+  update for mitigation.
+- None of the affected CPUs enumerate BHI_CTRL which was introduced in Golden
+  Cove (Alder Lake and Sapphire Rapids). This can help guests to determine the
+  host's affected status.
+- Intel Atom CPUs are not affected by ITS.
+
+Mitigation
+----------
+As only the indirect branches and RETs that have their last byte of instruction
+in the lower half of the cacheline are vulnerable to ITS, the basic idea behind
+the mitigation is to not allow indirect branches in the lower half.
+
+This is achieved by relying on existing retpoline support in the kernel, and in
+compilers. ITS-vulnerable retpoline sites are runtime patched to point to newly
+added ITS-safe thunks. These safe thunks consists of indirect branch in the
+second half of the cacheline. Not all retpoline sites are patched to thunks, if
+a retpoline site is evaluated to be ITS-safe, it is replaced with an inline
+indirect branch.
+
+Dynamic thunks
+~~~~~~~~~~~~~~
+From a dynamically allocated pool of safe-thunks, each vulnerable site is
+replaced with a new thunk, such that they get a unique address. This could
+improve the branch prediction accuracy. Also, it is a defense-in-depth measure
+against aliasing.
+
+Note, for simplicity, indirect branches in eBPF programs are always replaced
+with a jump to a static thunk in __x86_indirect_its_thunk_array. If required,
+in future this can be changed to use dynamic thunks.
+
+All vulnerable RETs are replaced with a static thunk, they do not use dynamic
+thunks. This is because RETs get their prediction from RSB mostly that does not
+depend on source address. RETs that underflow RSB may benefit from dynamic
+thunks. But, RETs significantly outnumber indirect branches, and any benefit
+from a unique source address could be outweighed by the increased icache
+footprint and iTLB pressure.
+
+Retpoline
+~~~~~~~~~
+Retpoline sequence also mitigates ITS-unsafe indirect branches. For this
+reason, when retpoline is enabled, ITS mitigation only relocates the RETs to
+safe thunks. Unless user requested the RSB-stuffing mitigation.
+
+RSB Stuffing
+~~~~~~~~~~~~
+RSB-stuffing via Call Depth Tracking is a mitigation for Retbleed RSB-underflow
+attacks. And it also mitigates RETs that are vulnerable to ITS.
+
+Mitigation in guests
+^^^^^^^^^^^^^^^^^^^^
+All guests deploy ITS mitigation by default, irrespective of eIBRS enumeration
+and Family/Model of the guest. This is because eIBRS feature could be hidden
+from a guest. One exception to this is when a guest enumerates BHI_DIS_S, which
+indicates that the guest is running on an unaffected host.
+
+To prevent guests from unnecessarily deploying the mitigation on unaffected
+platforms, Intel has defined ITS_NO bit(62) in MSR IA32_ARCH_CAPABILITIES. When
+a guest sees this bit set, it should not enumerate the ITS bug. Note, this bit
+is not set by any hardware, but is **intended for VMMs to synthesize** it for
+guests as per the host's affected status.
+
+Mitigation options
+^^^^^^^^^^^^^^^^^^
+The ITS mitigation can be controlled using the "indirect_target_selection"
+kernel parameter. The available options are:
+
+   ======== ===================================================================
+   on       (default)  Deploy the "Aligned branch/return thunks" mitigation.
+	    If spectre_v2 mitigation enables retpoline, aligned-thunks are only
+	    deployed for the affected RET instructions. Retpoline mitigates
+	    indirect branches.
+
+   off      Disable ITS mitigation.
+
+   vmexit   Equivalent to "=on" if the CPU is affected by guest/host isolation
+	    part of ITS. Otherwise, mitigation is not deployed. This option is
+	    useful when host userspace is not in the threat model, and only
+	    attacks from guest to host are considered.
+
+   stuff    Deploy RSB-fill mitigation when retpoline is also deployed.
+	    Otherwise, deploy the default mitigation. When retpoline mitigation
+	    is enabled, RSB-stuffing via Call-Depth-Tracking also mitigates
+	    ITS.
+
+   force    Force the ITS bug and deploy the default mitigation.
+   ======== ===================================================================
+
+Sysfs reporting
+---------------
+
+The sysfs file showing ITS mitigation status is:
+
+  /sys/devices/system/cpu/vulnerabilities/indirect_target_selection
+
+Note, microcode mitigation status is not reported in this file.
+
+The possible values in this file are:
+
+.. list-table::
+
+   * - Not affected
+     - The processor is not vulnerable.
+   * - Vulnerable
+     - System is vulnerable and no mitigation has been applied.
+   * - Vulnerable, KVM: Not affected
+     - System is vulnerable to intra-mode BTI, but not affected by eIBRS
+       guest/host isolation.
+   * - Mitigation: Aligned branch/return thunks
+     - The mitigation is enabled, affected indirect branches and RETs are
+       relocated to safe thunks.
+   * - Mitigation: Retpolines, Stuffing RSB
+     - The mitigation is enabled using retpoline and RSB stuffing.
+
+References
+----------
+.. [#f1] /*(DEBLOBBED)*/
+
+.. [#f2] Affected Processors list - https://www.intel.com/content/www/us/en/developer/topic-technology/software-security-guidance/processors-affected-consolidated-product-cpu-model.html
+
+.. [#f3] Affected Processors list (machine readable) - https://github.com/intel/Intel-affected-processor-list
diff --git linux-libre-6.12-gnu/Documentation/admin-guide/hw-vuln/processor_mmio_stale_data.rst linux-libre-6.12.79-gnu/Documentation/admin-guide/hw-vuln/processor_mmio_stale_data.rst
index 1302fd1b55e8..6dba18dbb9ab 100644
--- linux-libre-6.12-gnu/Documentation/admin-guide/hw-vuln/processor_mmio_stale_data.rst
+++ linux-libre-6.12.79-gnu/Documentation/admin-guide/hw-vuln/processor_mmio_stale_data.rst
@@ -157,9 +157,7 @@ This is achieved by using the otherwise unused and obsolete VERW instruction in
 combination with a microcode update. The microcode clears the affected CPU
 buffers when the VERW instruction is executed.
 
-Kernel reuses the MDS function to invoke the buffer clearing:
-
-	mds_clear_cpu_buffers()
+Kernel does the buffer clearing with x86_clear_cpu_buffers().
 
 On MDS affected CPUs, the kernel already invokes CPU buffer clear on
 kernel/userspace, hypervisor/guest and C-state (idle) transitions. No
diff --git linux-libre-6.12-gnu/Documentation/admin-guide/hw-vuln/srso.rst linux-libre-6.12.79-gnu/Documentation/admin-guide/hw-vuln/srso.rst
index 2ad1c05b8c88..66af95251a3d 100644
--- linux-libre-6.12-gnu/Documentation/admin-guide/hw-vuln/srso.rst
+++ linux-libre-6.12.79-gnu/Documentation/admin-guide/hw-vuln/srso.rst
@@ -104,7 +104,20 @@ The possible values in this file are:
 
    (spec_rstack_overflow=ibpb-vmexit)
 
+ * 'Mitigation: Reduced Speculation':
 
+   This mitigation gets automatically enabled when the above one "IBPB on
+   VMEXIT" has been selected and the CPU supports the BpSpecReduce bit.
+
+   It gets automatically enabled on machines which have the
+   SRSO_USER_KERNEL_NO=1 CPUID bit. In that case, the code logic is to switch
+   to the above =ibpb-vmexit mitigation because the user/kernel boundary is
+   not affected anymore and thus "safe RET" is not needed.
+
+   After enabling the IBPB on VMEXIT mitigation option, the BpSpecReduce bit
+   is detected (functionality present on all such machines) and that
+   practically overrides IBPB on VMEXIT as it has a lot less performance
+   impact and takes care of the guest->host attack vector too.
 
 In order to exploit vulnerability, an attacker needs to:
 
diff --git linux-libre-6.12-gnu/Documentation/admin-guide/hw-vuln/vmscape.rst linux-libre-6.12.79-gnu/Documentation/admin-guide/hw-vuln/vmscape.rst
new file mode 100644
index 000000000000..d9b9a2b6c114
--- /dev/null
+++ linux-libre-6.12.79-gnu/Documentation/admin-guide/hw-vuln/vmscape.rst
@@ -0,0 +1,110 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+VMSCAPE
+=======
+
+VMSCAPE is a vulnerability that may allow a guest to influence the branch
+prediction in host userspace. It particularly affects hypervisors like QEMU.
+
+Even if a hypervisor may not have any sensitive data like disk encryption keys,
+guest-userspace may be able to attack the guest-kernel using the hypervisor as
+a confused deputy.
+
+Affected processors
+-------------------
+
+The following CPU families are affected by VMSCAPE:
+
+**Intel processors:**
+  - Skylake generation (Parts without Enhanced-IBRS)
+  - Cascade Lake generation - (Parts affected by ITS guest/host separation)
+  - Alder Lake and newer (Parts affected by BHI)
+
+Note that, BHI affected parts that use BHB clearing software mitigation e.g.
+Icelake are not vulnerable to VMSCAPE.
+
+**AMD processors:**
+  - Zen series (families 0x17, 0x19, 0x1a)
+
+** Hygon processors:**
+ - Family 0x18
+
+Mitigation
+----------
+
+Conditional IBPB
+----------------
+
+Kernel tracks when a CPU has run a potentially malicious guest and issues an
+IBPB before the first exit to userspace after VM-exit. If userspace did not run
+between VM-exit and the next VM-entry, no IBPB is issued.
+
+Note that the existing userspace mitigation against Spectre-v2 is effective in
+protecting the userspace. They are insufficient to protect the userspace VMMs
+from a malicious guest. This is because Spectre-v2 mitigations are applied at
+context switch time, while the userspace VMM can run after a VM-exit without a
+context switch.
+
+Vulnerability enumeration and mitigation is not applied inside a guest. This is
+because nested hypervisors should already be deploying IBPB to isolate
+themselves from nested guests.
+
+SMT considerations
+------------------
+
+When Simultaneous Multi-Threading (SMT) is enabled, hypervisors can be
+vulnerable to cross-thread attacks. For complete protection against VMSCAPE
+attacks in SMT environments, STIBP should be enabled.
+
+The kernel will issue a warning if SMT is enabled without adequate STIBP
+protection. Warning is not issued when:
+
+- SMT is disabled
+- STIBP is enabled system-wide
+- Intel eIBRS is enabled (which implies STIBP protection)
+
+System information and options
+------------------------------
+
+The sysfs file showing VMSCAPE mitigation status is:
+
+  /sys/devices/system/cpu/vulnerabilities/vmscape
+
+The possible values in this file are:
+
+ * 'Not affected':
+
+   The processor is not vulnerable to VMSCAPE attacks.
+
+ * 'Vulnerable':
+
+   The processor is vulnerable and no mitigation has been applied.
+
+ * 'Mitigation: IBPB before exit to userspace':
+
+   Conditional IBPB mitigation is enabled. The kernel tracks when a CPU has
+   run a potentially malicious guest and issues an IBPB before the first
+   exit to userspace after VM-exit.
+
+ * 'Mitigation: IBPB on VMEXIT':
+
+   IBPB is issued on every VM-exit. This occurs when other mitigations like
+   RETBLEED or SRSO are already issuing IBPB on VM-exit.
+
+Mitigation control on the kernel command line
+----------------------------------------------
+
+The mitigation can be controlled via the ``vmscape=`` command line parameter:
+
+ * ``vmscape=off``:
+
+   Disable the VMSCAPE mitigation.
+
+ * ``vmscape=ibpb``:
+
+   Enable conditional IBPB mitigation (default when CONFIG_MITIGATION_VMSCAPE=y).
+
+ * ``vmscape=force``:
+
+   Force vulnerability detection and mitigation even on processors that are
+   not known to be affected.
diff --git linux-libre-6.12-gnu/Documentation/admin-guide/kernel-parameters.txt linux-libre-6.12.79-gnu/Documentation/admin-guide/kernel-parameters.txt
index d401577b5a6a..e88505e945d5 100644
--- linux-libre-6.12-gnu/Documentation/admin-guide/kernel-parameters.txt
+++ linux-libre-6.12.79-gnu/Documentation/admin-guide/kernel-parameters.txt
@@ -2149,6 +2149,23 @@
 			different crypto accelerators. This option can be used
 			to achieve best performance for particular HW.
 
+	indirect_target_selection= [X86,Intel] Mitigation control for Indirect
+			Target Selection(ITS) bug in Intel CPUs. Updated
+			microcode is also required for a fix in IBPB.
+
+			on:     Enable mitigation (default).
+			off:    Disable mitigation.
+			force:	Force the ITS bug and deploy default
+				mitigation.
+			vmexit: Only deploy mitigation if CPU is affected by
+				guest/host isolation part of ITS.
+			stuff:	Deploy RSB-fill mitigation when retpoline is
+				also deployed. Otherwise, deploy the default
+				mitigation.
+
+			For details see:
+			Documentation/admin-guide/hw-vuln/indirect-target-selection.rst
+
 	init=		[KNL]
 			Format: <full_path>
 			Run specified binary instead of /sbin/init as init
@@ -3028,6 +3045,8 @@
 			* max_sec_lba48: Set or clear transfer size limit to
 			  65535 sectors.
 
+			* external: Mark port as external (hotplug-capable).
+
 			* [no]lpm: Enable or disable link power management.
 
 			* [no]setxfer: Indicate if transfer speed mode setting
@@ -3508,6 +3527,7 @@
 				expose users to several CPU vulnerabilities.
 				Equivalent to: if nokaslr then kpti=0 [ARM64]
 					       gather_data_sampling=off [X86]
+					       indirect_target_selection=off [X86]
 					       kvm.nx_huge_pages=off [X86]
 					       l1tf=off [X86]
 					       mds=off [X86]
@@ -3528,6 +3548,7 @@
 					       srbds=off [X86,INTEL]
 					       ssbd=force-off [ARM64]
 					       tsx_async_abort=off [X86]
+					       vmscape=off [X86]
 
 				Exceptions:
 					       This does not have any effect on
@@ -5902,6 +5923,9 @@
 
 	rootflags=	[KNL] Set root filesystem mount option string
 
+	initramfs_options= [KNL]
+                        Specify mount options for for the initramfs mount.
+
 	rootfstype=	[KNL] Set root filesystem type
 
 	rootwait	[KNL] Wait (indefinitely) for root device to show up.
@@ -6241,6 +6265,8 @@
 
 			Selecting 'on' will also enable the mitigation
 			against user space to user space task attacks.
+			Selecting specific mitigation does not force enable
+			user mitigations.
 
 			Selecting 'off' will disable both the kernel and
 			the user space protections.
@@ -6971,6 +6997,19 @@
 			having this key zero'ed is acceptable. E.g. in testing
 			scenarios.
 
+	tsa=		[X86] Control mitigation for Transient Scheduler
+			Attacks on AMD CPUs. Search the following in your
+			favourite search engine for more details:
+
+			"Technical guidance for mitigating transient scheduler
+			attacks".
+
+			off		- disable the mitigation
+			on		- enable the mitigation (default)
+			user		- mitigate only user/kernel transitions
+			vm		- mitigate only guest/host transitions
+
+
 	tsc=		Disable clocksource stability checks for TSC.
 			Format: <string>
 			[x86] reliable: mark tsc clocksource as reliable, this
@@ -7390,6 +7429,16 @@
 	vmpoff=		[KNL,S390] Perform z/VM CP command after power off.
 			Format: <command>
 
+	vmscape=	[X86] Controls mitigation for VMscape attacks.
+			VMscape attacks can leak information from a userspace
+			hypervisor to a guest via speculative side-channels.
+
+			off		- disable the mitigation
+			ibpb		- use Indirect Branch Prediction Barrier
+					  (IBPB) mitigation (default)
+			force		- force vulnerability detection even on
+					  unaffected processors
+
 	vsyscall=	[X86-64,EARLY]
 			Controls the behavior of vsyscalls (i.e. calls to
 			fixed addresses of 0xffffffffff600x00 from legacy
diff --git linux-libre-6.12-gnu/Documentation/admin-guide/laptops/lg-laptop.rst linux-libre-6.12.79-gnu/Documentation/admin-guide/laptops/lg-laptop.rst
index 67fd6932cef4..c4dd534f91ed 100644
--- linux-libre-6.12-gnu/Documentation/admin-guide/laptops/lg-laptop.rst
+++ linux-libre-6.12.79-gnu/Documentation/admin-guide/laptops/lg-laptop.rst
@@ -48,8 +48,8 @@ This value is reset to 100 when the kernel boots.
 Fan mode
 --------
 
-Writing 1/0 to /sys/devices/platform/lg-laptop/fan_mode disables/enables
-the fan silent mode.
+Writing 0/1/2 to /sys/devices/platform/lg-laptop/fan_mode sets fan mode to
+Optimal/Silent/Performance respectively.
 
 
 USB charge
diff --git linux-libre-6.12-gnu/Documentation/admin-guide/laptops/thinkpad-acpi.rst linux-libre-6.12.79-gnu/Documentation/admin-guide/laptops/thinkpad-acpi.rst
index 7f674a6cfa8a..4ab0fef7d440 100644
--- linux-libre-6.12-gnu/Documentation/admin-guide/laptops/thinkpad-acpi.rst
+++ linux-libre-6.12.79-gnu/Documentation/admin-guide/laptops/thinkpad-acpi.rst
@@ -445,8 +445,10 @@ event	code	Key		Notes
 0x1008	0x07	FN+F8		IBM: toggle screen expand
 				Lenovo: configure UltraNav,
 				or toggle screen expand.
-				On newer platforms (2024+)
-				replaced by 0x131f (see below)
+				On 2024 platforms replaced by
+				0x131f (see below) and on newer
+				platforms (2025 +) keycode is
+				replaced by 0x1401 (see below).
 
 0x1009	0x08	FN+F9		-
 
@@ -506,9 +508,11 @@ event	code	Key		Notes
 
 0x1019	0x18	unknown
 
-0x131f	...	FN+F8	        Platform Mode change.
+0x131f	...	FN+F8		Platform Mode change (2024 systems).
 				Implemented in driver.
 
+0x1401	...	FN+F8		Platform Mode change (2025 + systems).
+				Implemented in driver.
 ...	...	...
 
 0x1020	0x1F	unknown
diff --git linux-libre-6.12-gnu/Documentation/admin-guide/media/building.rst linux-libre-6.12.79-gnu/Documentation/admin-guide/media/building.rst
index a06473429916..7a413ba07f93 100644
--- linux-libre-6.12-gnu/Documentation/admin-guide/media/building.rst
+++ linux-libre-6.12.79-gnu/Documentation/admin-guide/media/building.rst
@@ -15,7 +15,7 @@ Please notice, however, that, if:
 
 you should use the main media development tree ``master`` branch:
 
-    https://git.linuxtv.org/media_tree.git/
+    https://git.linuxtv.org/media.git/
 
 In this case, you may find some useful information at the
 `LinuxTv wiki pages <https://linuxtv.org/wiki>`_:
diff --git linux-libre-6.12-gnu/Documentation/admin-guide/media/saa7134.rst linux-libre-6.12.79-gnu/Documentation/admin-guide/media/saa7134.rst
index 51eae7eb5ab7..18d7cbc897db 100644
--- linux-libre-6.12-gnu/Documentation/admin-guide/media/saa7134.rst
+++ linux-libre-6.12.79-gnu/Documentation/admin-guide/media/saa7134.rst
@@ -67,7 +67,7 @@ Changes / Fixes
 Please mail to linux-media AT vger.kernel.org unified diffs against
 the linux media git tree:
 
-    https://git.linuxtv.org/media_tree.git/
+    https://git.linuxtv.org/media.git/
 
 This is done by committing a patch at a clone of the git tree and
 submitting the patch using ``git send-email``. Don't forget to
diff --git linux-libre-6.12-gnu/Documentation/admin-guide/sysctl/kernel.rst linux-libre-6.12.79-gnu/Documentation/admin-guide/sysctl/kernel.rst
index f8bc1630eba0..fa21cdd610b2 100644
--- linux-libre-6.12-gnu/Documentation/admin-guide/sysctl/kernel.rst
+++ linux-libre-6.12.79-gnu/Documentation/admin-guide/sysctl/kernel.rst
@@ -212,6 +212,17 @@ pid>/``).
 This value defaults to 0.
 
 
+core_sort_vma
+=============
+
+The default coredump writes VMAs in address order. By setting
+``core_sort_vma`` to 1, VMAs will be written from smallest size
+to largest size. This is known to break at least elfutils, but
+can be handy when dealing with very large (and truncated)
+coredumps where the more useful debugging details are included
+in the smaller VMAs.
+
+
 core_uses_pid
 =============
 
diff --git linux-libre-6.12-gnu/Documentation/arch/arm64/booting.rst linux-libre-6.12.79-gnu/Documentation/arch/arm64/booting.rst
index b57776a68f15..15bcd1b4003a 100644
--- linux-libre-6.12-gnu/Documentation/arch/arm64/booting.rst
+++ linux-libre-6.12.79-gnu/Documentation/arch/arm64/booting.rst
@@ -285,6 +285,12 @@ Before jumping into the kernel, the following conditions must be met:
 
     - SCR_EL3.FGTEn (bit 27) must be initialised to 0b1.
 
+  For CPUs with the Fine Grained Traps 2 (FEAT_FGT2) extension present:
+
+  - If EL3 is present and the kernel is entered at EL2:
+
+    - SCR_EL3.FGTEn2 (bit 59) must be initialised to 0b1.
+
   For CPUs with support for HCRX_EL2 (FEAT_HCX) present:
 
   - If EL3 is present and the kernel is entered at EL2:
@@ -379,6 +385,22 @@ Before jumping into the kernel, the following conditions must be met:
 
     - SMCR_EL2.EZT0 (bit 30) must be initialised to 0b1.
 
+  For CPUs with the Performance Monitors Extension (FEAT_PMUv3p9):
+
+ - If EL3 is present:
+
+    - MDCR_EL3.EnPM2 (bit 7) must be initialised to 0b1.
+
+ - If the kernel is entered at EL1 and EL2 is present:
+
+    - HDFGRTR2_EL2.nPMICNTR_EL0 (bit 2) must be initialised to 0b1.
+    - HDFGRTR2_EL2.nPMICFILTR_EL0 (bit 3) must be initialised to 0b1.
+    - HDFGRTR2_EL2.nPMUACR_EL1 (bit 4) must be initialised to 0b1.
+
+    - HDFGWTR2_EL2.nPMICNTR_EL0 (bit 2) must be initialised to 0b1.
+    - HDFGWTR2_EL2.nPMICFILTR_EL0 (bit 3) must be initialised to 0b1.
+    - HDFGWTR2_EL2.nPMUACR_EL1 (bit 4) must be initialised to 0b1.
+
   For CPUs with Memory Copy and Memory Set instructions (FEAT_MOPS):
 
   - If the kernel is entered at EL1 and EL2 is present:
diff --git linux-libre-6.12-gnu/Documentation/arch/arm64/elf_hwcaps.rst linux-libre-6.12.79-gnu/Documentation/arch/arm64/elf_hwcaps.rst
index 694f67fa07d1..ab556426c7ac 100644
--- linux-libre-6.12-gnu/Documentation/arch/arm64/elf_hwcaps.rst
+++ linux-libre-6.12.79-gnu/Documentation/arch/arm64/elf_hwcaps.rst
@@ -174,22 +174,28 @@ HWCAP2_DCPODP
     Functionality implied by ID_AA64ISAR1_EL1.DPB == 0b0010.
 
 HWCAP2_SVE2
-    Functionality implied by ID_AA64ZFR0_EL1.SVEver == 0b0001.
+    Functionality implied by ID_AA64PFR0_EL1.SVE == 0b0001 and
+    ID_AA64ZFR0_EL1.SVEver == 0b0001.
 
 HWCAP2_SVEAES
-    Functionality implied by ID_AA64ZFR0_EL1.AES == 0b0001.
+    Functionality implied by ID_AA64PFR0_EL1.SVE == 0b0001 and
+    ID_AA64ZFR0_EL1.AES == 0b0001.
 
 HWCAP2_SVEPMULL
-    Functionality implied by ID_AA64ZFR0_EL1.AES == 0b0010.
+    Functionality implied by ID_AA64PFR0_EL1.SVE == 0b0001 and
+    ID_AA64ZFR0_EL1.AES == 0b0010.
 
 HWCAP2_SVEBITPERM
-    Functionality implied by ID_AA64ZFR0_EL1.BitPerm == 0b0001.
+    Functionality implied by ID_AA64PFR0_EL1.SVE == 0b0001 and
+    ID_AA64ZFR0_EL1.BitPerm == 0b0001.
 
 HWCAP2_SVESHA3
-    Functionality implied by ID_AA64ZFR0_EL1.SHA3 == 0b0001.
+    Functionality implied by ID_AA64PFR0_EL1.SVE == 0b0001 and
+    ID_AA64ZFR0_EL1.SHA3 == 0b0001.
 
 HWCAP2_SVESM4
-    Functionality implied by ID_AA64ZFR0_EL1.SM4 == 0b0001.
+    Functionality implied by ID_AA64PFR0_EL1.SVE == 0b0001 and
+    ID_AA64ZFR0_EL1.SM4 == 0b0001.
 
 HWCAP2_FLAGM2
     Functionality implied by ID_AA64ISAR0_EL1.TS == 0b0010.
@@ -198,16 +204,20 @@ HWCAP2_FRINT
     Functionality implied by ID_AA64ISAR1_EL1.FRINTTS == 0b0001.
 
 HWCAP2_SVEI8MM
-    Functionality implied by ID_AA64ZFR0_EL1.I8MM == 0b0001.
+    Functionality implied by ID_AA64PFR0_EL1.SVE == 0b0001 and
+    ID_AA64ZFR0_EL1.I8MM == 0b0001.
 
 HWCAP2_SVEF32MM
-    Functionality implied by ID_AA64ZFR0_EL1.F32MM == 0b0001.
+    Functionality implied by ID_AA64PFR0_EL1.SVE == 0b0001 and
+    ID_AA64ZFR0_EL1.F32MM == 0b0001.
 
 HWCAP2_SVEF64MM
-    Functionality implied by ID_AA64ZFR0_EL1.F64MM == 0b0001.
+    Functionality implied by ID_AA64PFR0_EL1.SVE == 0b0001 and
+    ID_AA64ZFR0_EL1.F64MM == 0b0001.
 
 HWCAP2_SVEBF16
-    Functionality implied by ID_AA64ZFR0_EL1.BF16 == 0b0001.
+    Functionality implied by ID_AA64PFR0_EL1.SVE == 0b0001 and
+    ID_AA64ZFR0_EL1.BF16 == 0b0001.
 
 HWCAP2_I8MM
     Functionality implied by ID_AA64ISAR1_EL1.I8MM == 0b0001.
@@ -273,7 +283,8 @@ HWCAP2_EBF16
     Functionality implied by ID_AA64ISAR1_EL1.BF16 == 0b0010.
 
 HWCAP2_SVE_EBF16
-    Functionality implied by ID_AA64ZFR0_EL1.BF16 == 0b0010.
+    Functionality implied by ID_AA64PFR0_EL1.SVE == 0b0001 and
+    ID_AA64ZFR0_EL1.BF16 == 0b0010.
 
 HWCAP2_CSSC
     Functionality implied by ID_AA64ISAR2_EL1.CSSC == 0b0001.
@@ -282,7 +293,8 @@ HWCAP2_RPRFM
     Functionality implied by ID_AA64ISAR2_EL1.RPRFM == 0b0001.
 
 HWCAP2_SVE2P1
-    Functionality implied by ID_AA64ZFR0_EL1.SVEver == 0b0010.
+    Functionality implied by ID_AA64PFR0_EL1.SVE == 0b0001 and
+    ID_AA64ZFR0_EL1.SVEver == 0b0010.
 
 HWCAP2_SME2
     Functionality implied by ID_AA64SMFR0_EL1.SMEver == 0b0001.
@@ -309,7 +321,8 @@ HWCAP2_HBC
     Functionality implied by ID_AA64ISAR2_EL1.BC == 0b0001.
 
 HWCAP2_SVE_B16B16
-    Functionality implied by ID_AA64ZFR0_EL1.B16B16 == 0b0001.
+    Functionality implied by ID_AA64PFR0_EL1.SVE == 0b0001 and
+    ID_AA64ZFR0_EL1.B16B16 == 0b0001.
 
 HWCAP2_LRCPC3
     Functionality implied by ID_AA64ISAR1_EL1.LRCPC == 0b0011.
diff --git linux-libre-6.12-gnu/Documentation/arch/arm64/silicon-errata.rst linux-libre-6.12.79-gnu/Documentation/arch/arm64/silicon-errata.rst
index 65bfab1b1861..b6dacd012539 100644
--- linux-libre-6.12-gnu/Documentation/arch/arm64/silicon-errata.rst
+++ linux-libre-6.12.79-gnu/Documentation/arch/arm64/silicon-errata.rst
@@ -198,6 +198,8 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Neoverse-V3     | #3312417        | ARM64_ERRATUM_3194386       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Neoverse-V3AE   | #3312417        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | MMU-500         | #841119,826419  | N/A                         |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | MMU-600         | #1076982,1209401| N/A                         |
@@ -255,8 +257,11 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | Hisilicon      | Hip08 SMMU PMCG | #162001800      | N/A                         |
 +----------------+-----------------+-----------------+-----------------------------+
-| Hisilicon      | Hip{08,09,10,10C| #162001900      | N/A                         |
-|                | ,11} SMMU PMCG  |                 |                             |
+| Hisilicon      | Hip{08,09,09A,10| #162001900      | N/A                         |
+|                | ,10C,11}        |                 |                             |
+|                | SMMU PMCG       |                 |                             |
++----------------+-----------------+-----------------+-----------------------------+
+| Hisilicon      | Hip09           | #162100801      | HISILICON_ERRATUM_162100801 |
 +----------------+-----------------+-----------------+-----------------------------+
 +----------------+-----------------+-----------------+-----------------------------+
 | Qualcomm Tech. | Kryo/Falkor v1  | E1003           | QCOM_FALKOR_ERRATUM_1003    |
diff --git linux-libre-6.12-gnu/Documentation/arch/x86/boot.rst linux-libre-6.12.79-gnu/Documentation/arch/x86/boot.rst
index 4fd492cb4970..ad2d8ddad27f 100644
--- linux-libre-6.12-gnu/Documentation/arch/x86/boot.rst
+++ linux-libre-6.12.79-gnu/Documentation/arch/x86/boot.rst
@@ -896,10 +896,19 @@ Offset/size:	0x260/4
 
   The kernel runtime start address is determined by the following algorithm::
 
-	if (relocatable_kernel)
-	runtime_start = align_up(load_address, kernel_alignment)
-	else
-	runtime_start = pref_address
+   	if (relocatable_kernel) {
+   		if (load_address < pref_address)
+   			load_address = pref_address;
+   		runtime_start = align_up(load_address, kernel_alignment);
+   	} else {
+   		runtime_start = pref_address;
+   	}
+
+Hence the necessary memory window location and size can be estimated by
+a boot loader as::
+
+   	memory_window_start = runtime_start;
+   	memory_window_size = init_size;
 
 ============	===============
 Field name:	handover_offset
diff --git linux-libre-6.12-gnu/Documentation/arch/x86/mds.rst linux-libre-6.12.79-gnu/Documentation/arch/x86/mds.rst
index 5a2e6c0ef04a..3518671e1a85 100644
--- linux-libre-6.12-gnu/Documentation/arch/x86/mds.rst
+++ linux-libre-6.12.79-gnu/Documentation/arch/x86/mds.rst
@@ -93,7 +93,7 @@ enters a C-state.
 
 The kernel provides a function to invoke the buffer clearing:
 
-    mds_clear_cpu_buffers()
+    x86_clear_cpu_buffers()
 
 Also macro CLEAR_CPU_BUFFERS can be used in ASM late in exit-to-user path.
 Other than CFLAGS.ZF, this macro doesn't clobber any registers.
@@ -185,9 +185,9 @@ Mitigation points
    idle clearing would be a window dressing exercise and is therefore not
    activated.
 
-   The invocation is controlled by the static key mds_idle_clear which is
-   switched depending on the chosen mitigation mode and the SMT state of
-   the system.
+   The invocation is controlled by the static key cpu_buf_idle_clear which is
+   switched depending on the chosen mitigation mode and the SMT state of the
+   system.
 
    The buffer clear is only invoked before entering the C-State to prevent
    that stale data from the idling CPU from spilling to the Hyper-Thread
diff --git linux-libre-6.12-gnu/Documentation/bpf/bpf_devel_QA.rst linux-libre-6.12.79-gnu/Documentation/bpf/bpf_devel_QA.rst
index de27e1620821..0acb4c9b8d90 100644
--- linux-libre-6.12-gnu/Documentation/bpf/bpf_devel_QA.rst
+++ linux-libre-6.12.79-gnu/Documentation/bpf/bpf_devel_QA.rst
@@ -382,6 +382,14 @@ In case of new BPF instructions, once the changes have been accepted
 into the Linux kernel, please implement support into LLVM's BPF back
 end. See LLVM_ section below for further information.
 
+Q: What "BPF_INTERNAL" symbol namespace is for?
+-----------------------------------------------
+A: Symbols exported as BPF_INTERNAL can only be used by BPF infrastructure
+like preload kernel modules with light skeleton. Most symbols outside
+of BPF_INTERNAL are not expected to be used by code outside of BPF either.
+Symbols may lack the designation because they predate the namespaces,
+or due to an oversight.
+
 Stable submission
 =================
 
diff --git linux-libre-6.12-gnu/Documentation/bpf/map_hash.rst linux-libre-6.12.79-gnu/Documentation/bpf/map_hash.rst
index d2343952f2cb..8606bf958a8c 100644
--- linux-libre-6.12-gnu/Documentation/bpf/map_hash.rst
+++ linux-libre-6.12.79-gnu/Documentation/bpf/map_hash.rst
@@ -233,10 +233,16 @@ attempts in order to enforce the LRU property which have increasing impacts on
 other CPUs involved in the following operation attempts:
 
 - Attempt to use CPU-local state to batch operations
-- Attempt to fetch free nodes from global lists
+- Attempt to fetch ``target_free`` free nodes from global lists
 - Attempt to pull any node from a global list and remove it from the hashmap
 - Attempt to pull any node from any CPU's list and remove it from the hashmap
 
+The number of nodes to borrow from the global list in a batch, ``target_free``,
+depends on the size of the map. Larger batch size reduces lock contention, but
+may also exhaust the global structure. The value is computed at map init to
+avoid exhaustion, by limiting aggregate reservation by all CPUs to half the map
+size. With a minimum of a single element and maximum budget of 128 at a time.
+
 This algorithm is described visually in the following diagram. See the
 description in commit 3a08c2fd7634 ("bpf: LRU List") for a full explanation of
 the corresponding operations:
diff --git linux-libre-6.12-gnu/Documentation/bpf/map_lru_hash_update.dot linux-libre-6.12.79-gnu/Documentation/bpf/map_lru_hash_update.dot
index a0fee349d29c..ab10058f5b79 100644
--- linux-libre-6.12-gnu/Documentation/bpf/map_lru_hash_update.dot
+++ linux-libre-6.12.79-gnu/Documentation/bpf/map_lru_hash_update.dot
@@ -35,18 +35,18 @@ digraph {
   fn_bpf_lru_list_pop_free_to_local [shape=rectangle,fillcolor=2,
     label="Flush local pending,
     Rotate Global list, move
-    LOCAL_FREE_TARGET
+    target_free
     from global -> local"]
   // Also corresponds to:
   // fn__local_list_flush()
   // fn_bpf_lru_list_rotate()
   fn___bpf_lru_node_move_to_free[shape=diamond,fillcolor=2,
-    label="Able to free\nLOCAL_FREE_TARGET\nnodes?"]
+    label="Able to free\ntarget_free\nnodes?"]
 
   fn___bpf_lru_list_shrink_inactive [shape=rectangle,fillcolor=3,
     label="Shrink inactive list
       up to remaining
-      LOCAL_FREE_TARGET
+      target_free
       (global LRU -> local)"]
   fn___bpf_lru_list_shrink [shape=diamond,fillcolor=2,
     label="> 0 entries in\nlocal free list?"]
diff --git linux-libre-6.12-gnu/Documentation/core-api/symbol-namespaces.rst linux-libre-6.12.79-gnu/Documentation/core-api/symbol-namespaces.rst
index 12e4aecdae94..cca94469fa41 100644
--- linux-libre-6.12-gnu/Documentation/core-api/symbol-namespaces.rst
+++ linux-libre-6.12.79-gnu/Documentation/core-api/symbol-namespaces.rst
@@ -28,6 +28,9 @@ kernel. As of today, modules that make use of symbols exported into namespaces,
 are required to import the namespace. Otherwise the kernel will, depending on
 its configuration, reject loading the module or warn about a missing import.
 
+Additionally, it is possible to put symbols into a module namespace, strictly
+limiting which modules are allowed to use these symbols.
+
 2. How to define Symbol Namespaces
 ==================================
 
@@ -68,7 +71,7 @@ is to define the default namespace in the ``Makefile`` of the subsystem. E.g. to
 export all symbols defined in usb-common into the namespace USB_COMMON, add a
 line like this to drivers/usb/common/Makefile::
 
-	ccflags-y += -DDEFAULT_SYMBOL_NAMESPACE=USB_COMMON
+	ccflags-y += -DDEFAULT_SYMBOL_NAMESPACE='"USB_COMMON"'
 
 That will affect all EXPORT_SYMBOL() and EXPORT_SYMBOL_GPL() statements. A
 symbol exported with EXPORT_SYMBOL_NS() while this definition is present, will
@@ -79,11 +82,27 @@ A second option to define the default namespace is directly in the compilation
 unit as preprocessor statement. The above example would then read::
 
 	#undef  DEFAULT_SYMBOL_NAMESPACE
-	#define DEFAULT_SYMBOL_NAMESPACE USB_COMMON
+	#define DEFAULT_SYMBOL_NAMESPACE "USB_COMMON"
 
 within the corresponding compilation unit before any EXPORT_SYMBOL macro is
 used.
 
+2.3 Using the EXPORT_SYMBOL_GPL_FOR_MODULES() macro
+===================================================
+
+Symbols exported using this macro are put into a module namespace. This
+namespace cannot be imported.
+
+The macro takes a comma separated list of module names, allowing only those
+modules to access this symbol. Simple tail-globs are supported.
+
+For example:
+
+  EXPORT_SYMBOL_GPL_FOR_MODULES(preempt_notifier_inc, "kvm,kvm-*")
+
+will limit usage of this symbol to modules whoes name matches the given
+patterns.
+
 3. How to use Symbols exported in Namespaces
 ============================================
 
@@ -155,3 +174,6 @@ in-tree modules::
 You can also run nsdeps for external module builds. A typical usage is::
 
 	$ make -C <path_to_kernel_src> M=$PWD nsdeps
+
+Note: it will happily generate an import statement for the module namespace;
+which will not work and generates build and runtime failures.
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml
index 76163abed655..5ed40f21b8eb 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml
+++ linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml
@@ -55,8 +55,7 @@ properties:
       - const: arm,primecell
 
   reg:
-    minItems: 1
-    maxItems: 2
+    maxItems: 1
 
   clocks:
     maxItems: 1
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml
index 8eec07d9d454..07d21a3617f5 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml
+++ linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml
@@ -41,8 +41,7 @@ properties:
       - const: arm,primecell
 
   reg:
-    minItems: 1
-    maxItems: 2
+    maxItems: 1
 
   qcom,dsb-element-bits:
     description:
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/cache/qcom,llcc.yaml linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/cache/qcom,llcc.yaml
index 68ea5f70b75f..ee7edc6f60e2 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/cache/qcom,llcc.yaml
+++ linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/cache/qcom,llcc.yaml
@@ -39,11 +39,11 @@ properties:
 
   reg:
     minItems: 2
-    maxItems: 9
+    maxItems: 10
 
   reg-names:
     minItems: 2
-    maxItems: 9
+    maxItems: 10
 
   interrupts:
     maxItems: 1
@@ -134,6 +134,36 @@ allOf:
               - qcom,qdu1000-llcc
               - qcom,sc8180x-llcc
               - qcom,sc8280xp-llcc
+    then:
+      properties:
+        reg:
+          items:
+            - description: LLCC0 base register region
+            - description: LLCC1 base register region
+            - description: LLCC2 base register region
+            - description: LLCC3 base register region
+            - description: LLCC4 base register region
+            - description: LLCC5 base register region
+            - description: LLCC6 base register region
+            - description: LLCC7 base register region
+            - description: LLCC broadcast base register region
+        reg-names:
+          items:
+            - const: llcc0_base
+            - const: llcc1_base
+            - const: llcc2_base
+            - const: llcc3_base
+            - const: llcc4_base
+            - const: llcc5_base
+            - const: llcc6_base
+            - const: llcc7_base
+            - const: llcc_broadcast_base
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
               - qcom,x1e80100-llcc
     then:
       properties:
@@ -148,6 +178,7 @@ allOf:
             - description: LLCC6 base register region
             - description: LLCC7 base register region
             - description: LLCC broadcast base register region
+            - description: LLCC broadcast AND register region
         reg-names:
           items:
             - const: llcc0_base
@@ -159,6 +190,7 @@ allOf:
             - const: llcc6_base
             - const: llcc7_base
             - const: llcc_broadcast_base
+            - const: llcc_broadcast_and_base
 
   - if:
       properties:
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/clock/adi,axi-clkgen.yaml linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/clock/adi,axi-clkgen.yaml
index 5e942bccf277..2b2041818a0a 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/clock/adi,axi-clkgen.yaml
+++ linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/clock/adi,axi-clkgen.yaml
@@ -26,9 +26,21 @@ properties:
     description:
       Specifies the reference clock(s) from which the output frequency is
       derived. This must either reference one clock if only the first clock
-      input is connected or two if both clock inputs are connected.
-    minItems: 1
-    maxItems: 2
+      input is connected or two if both clock inputs are connected. The last
+      clock is the AXI bus clock that needs to be enabled so we can access the
+      core registers.
+    minItems: 2
+    maxItems: 3
+
+  clock-names:
+    oneOf:
+      - items:
+          - const: clkin1
+          - const: s_axi_aclk
+      - items:
+          - const: clkin1
+          - const: clkin2
+          - const: s_axi_aclk
 
   '#clock-cells':
     const: 0
@@ -40,6 +52,7 @@ required:
   - compatible
   - reg
   - clocks
+  - clock-names
   - '#clock-cells'
 
 additionalProperties: false
@@ -50,5 +63,6 @@ examples:
       compatible = "adi,axi-clkgen-2.00.a";
       #clock-cells = <0>;
       reg = <0xff000000 0x1000>;
-      clocks = <&osc 1>;
+      clocks = <&osc 1>, <&clkc 15>;
+      clock-names = "clkin1", "s_axi_aclk";
     };
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/clock/imx93-clock.yaml linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/clock/imx93-clock.yaml
index ccb53c6b96c1..98c0800732ef 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/clock/imx93-clock.yaml
+++ linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/clock/imx93-clock.yaml
@@ -16,6 +16,7 @@ description: |
 properties:
   compatible:
     enum:
+      - fsl,imx91-ccm
       - fsl,imx93-ccm
 
   reg:
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/clock/qcom,x1e80100-gcc.yaml linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/clock/qcom,x1e80100-gcc.yaml
index 5951a60ab081..61ff277eae54 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/clock/qcom,x1e80100-gcc.yaml
+++ linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/clock/qcom,x1e80100-gcc.yaml
@@ -28,9 +28,36 @@ properties:
       - description: PCIe 5 pipe clock
       - description: PCIe 6a pipe clock
       - description: PCIe 6b pipe clock
-      - description: USB QMP Phy 0 clock source
-      - description: USB QMP Phy 1 clock source
-      - description: USB QMP Phy 2 clock source
+      - description: USB4_0 QMPPHY clock source
+      - description: USB4_1 QMPPHY clock source
+      - description: USB4_2 QMPPHY clock source
+      - description: USB4_0 PHY DP0 GMUX clock source
+      - description: USB4_0 PHY DP1 GMUX clock source
+      - description: USB4_0 PHY PCIE PIPEGMUX clock source
+      - description: USB4_0 PHY PIPEGMUX clock source
+      - description: USB4_0 PHY SYS PCIE PIPEGMUX clock source
+      - description: USB4_1 PHY DP0 GMUX 2 clock source
+      - description: USB4_1 PHY DP1 GMUX 2 clock source
+      - description: USB4_1 PHY PCIE PIPEGMUX clock source
+      - description: USB4_1 PHY PIPEGMUX clock source
+      - description: USB4_1 PHY SYS PCIE PIPEGMUX clock source
+      - description: USB4_2 PHY DP0 GMUX 2 clock source
+      - description: USB4_2 PHY DP1 GMUX 2 clock source
+      - description: USB4_2 PHY PCIE PIPEGMUX clock source
+      - description: USB4_2 PHY PIPEGMUX clock source
+      - description: USB4_2 PHY SYS PCIE PIPEGMUX clock source
+      - description: USB4_0 PHY RX 0 clock source
+      - description: USB4_0 PHY RX 1 clock source
+      - description: USB4_1 PHY RX 0 clock source
+      - description: USB4_1 PHY RX 1 clock source
+      - description: USB4_2 PHY RX 0 clock source
+      - description: USB4_2 PHY RX 1 clock source
+      - description: USB4_0 PHY PCIE PIPE clock source
+      - description: USB4_0 PHY max PIPE clock source
+      - description: USB4_1 PHY PCIE PIPE clock source
+      - description: USB4_1 PHY max PIPE clock source
+      - description: USB4_2 PHY PCIE PIPE clock source
+      - description: USB4_2 PHY max PIPE clock source
 
   power-domains:
     description:
@@ -63,7 +90,34 @@ examples:
                <&pcie6b_phy>,
                <&usb_1_ss0_qmpphy 0>,
                <&usb_1_ss1_qmpphy 1>,
-               <&usb_1_ss2_qmpphy 2>;
+               <&usb_1_ss2_qmpphy 2>,
+               <&usb4_0_phy_dp0_gmux_clk>,
+               <&usb4_0_phy_dp1_gmux_clk>,
+               <&usb4_0_phy_pcie_pipegmux_clk>,
+               <&usb4_0_phy_pipegmux_clk>,
+               <&usb4_0_phy_sys_pcie_pipegmux_clk>,
+               <&usb4_1_phy_dp0_gmux_2_clk>,
+               <&usb4_1_phy_dp1_gmux_2_clk>,
+               <&usb4_1_phy_pcie_pipegmux_clk>,
+               <&usb4_1_phy_pipegmux_clk>,
+               <&usb4_1_phy_sys_pcie_pipegmux_clk>,
+               <&usb4_2_phy_dp0_gmux_2_clk>,
+               <&usb4_2_phy_dp1_gmux_2_clk>,
+               <&usb4_2_phy_pcie_pipegmux_clk>,
+               <&usb4_2_phy_pipegmux_clk>,
+               <&usb4_2_phy_sys_pcie_pipegmux_clk>,
+               <&usb4_0_phy_rx_0_clk>,
+               <&usb4_0_phy_rx_1_clk>,
+               <&usb4_1_phy_rx_0_clk>,
+               <&usb4_1_phy_rx_1_clk>,
+               <&usb4_2_phy_rx_0_clk>,
+               <&usb4_2_phy_rx_1_clk>,
+               <&usb4_0_phy_pcie_pipe_clk>,
+               <&usb4_0_phy_max_pipe_clk>,
+               <&usb4_1_phy_pcie_pipe_clk>,
+               <&usb4_1_phy_max_pipe_clk>,
+               <&usb4_2_phy_pcie_pipe_clk>,
+               <&usb4_2_phy_max_pipe_clk>;
       power-domains = <&rpmhpd RPMHPD_CX>;
       #clock-cells = <1>;
       #reset-cells = <1>;
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/display/bridge/adi,adv7533.yaml linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/display/bridge/adi,adv7533.yaml
index df20a3c9c744..ec89115c74e4 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/display/bridge/adi,adv7533.yaml
+++ linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/display/bridge/adi,adv7533.yaml
@@ -90,7 +90,7 @@ properties:
   adi,dsi-lanes:
     description: Number of DSI data lanes connected to the DSI host.
     $ref: /schemas/types.yaml#/definitions/uint32
-    enum: [ 1, 2, 3, 4 ]
+    enum: [ 2, 3, 4 ]
 
   "#sound-dai-cells":
     const: 0
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/display/msm/qcom,mdp5.yaml linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/display/msm/qcom,mdp5.yaml
index e153f8d26e7a..2735c78b0b67 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/display/msm/qcom,mdp5.yaml
+++ linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/display/msm/qcom,mdp5.yaml
@@ -60,7 +60,6 @@ properties:
           - const: bus
           - const: core
           - const: vsync
-          - const: lut
           - const: tbu
           - const: tbu_rt
         # MSM8996 has additional iommu clock
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dpu.yaml linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dpu.yaml
index 4ebea60b8c5b..8c52fa0ea5f8 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dpu.yaml
+++ linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dpu.yaml
@@ -25,7 +25,7 @@ properties:
     maxItems: 1
 
   clocks:
-    minItems: 2
+    maxItems: 2
 
   clock-names:
     items:
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dsi-host.yaml linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dsi-host.yaml
index bc5594d18643..300bf2252c3e 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dsi-host.yaml
+++ linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dsi-host.yaml
@@ -20,7 +20,7 @@ properties:
     maxItems: 2
 
   clocks:
-    minItems: 1
+    maxItems: 1
 
   clock-names:
     items:
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.yaml linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.yaml
index b57ae6963e62..6b6f6762d122 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.yaml
+++ linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.yaml
@@ -97,7 +97,10 @@ properties:
 
   resets:
     items:
-      - description: module reset
+      - description:
+          Module reset. This property is optional for controllers in Tegra194,
+          Tegra234 etc where an internal software reset is available as an
+          alternative.
 
   reset-names:
     items:
@@ -116,6 +119,13 @@ properties:
       - const: rx
       - const: tx
 
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
 allOf:
   - $ref: /schemas/i2c/i2c-controller.yaml
   - if:
@@ -169,6 +179,18 @@ allOf:
       properties:
         power-domains: false
 
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - nvidia,tegra194-i2c
+    then:
+      required:
+        - resets
+        - reset-names
+
 unevaluatedProperties: false
 
 examples:
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml
index fc8b97f82077..41fe00034742 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml
+++ linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml
@@ -30,7 +30,7 @@ properties:
     maxItems: 1
 
   spi-max-frequency:
-    maximum: 30000000
+    maximum: 66000000
 
   reset-gpios:
     maxItems: 1
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml
index e850a8894758..bb40bb9e036e 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml
+++ linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml
@@ -27,7 +27,7 @@ properties:
     description: |
       For multicolor LED support this property should be defined as either
       LED_COLOR_ID_RGB or LED_COLOR_ID_MULTI which can be found in
-      include/linux/leds/common.h.
+      include/dt-bindings/leds/common.h.
     enum: [ 8, 9 ]
 
 required:
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/media/i2c/st,st-mipid02.yaml linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/media/i2c/st,st-mipid02.yaml
index b68141264c0e..4d40e75b4e1e 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/media/i2c/st,st-mipid02.yaml
+++ linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/media/i2c/st,st-mipid02.yaml
@@ -71,7 +71,7 @@ properties:
                 description:
                   Any lane can be inverted or not.
                 minItems: 1
-                maxItems: 2
+                maxItems: 3
 
             required:
               - data-lanes
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml
index bb81307dc11b..4fc78efaa550 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml
+++ linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml
@@ -50,15 +50,15 @@ properties:
     minimum: 0
     maximum: 1
 
-  rohm,charger-sense-resistor-ohms:
-    minimum: 10000000
-    maximum: 50000000
+  rohm,charger-sense-resistor-micro-ohms:
+    minimum: 10000
+    maximum: 50000
     description: |
-      BD71827 and BD71828 have SAR ADC for measuring charging currents.
-      External sense resistor (RSENSE in data sheet) should be used. If
-      something other but 30MOhm resistor is used the resistance value
-      should be given here in Ohms.
-    default: 30000000
+      BD71815 has SAR ADC for measuring charging currents. External sense
+      resistor (RSENSE in data sheet) should be used. If something other
+      but a 30 mOhm resistor is used the resistance value should be given
+      here in micro Ohms.
+    default: 30000
 
   regulators:
     $ref: /schemas/regulator/rohm,bd71815-regulator.yaml
@@ -67,7 +67,7 @@ properties:
 
   gpio-reserved-ranges:
     description: |
-      Usage of BD71828 GPIO pins can be changed via OTP. This property can be
+      Usage of BD71815 GPIO pins can be changed via OTP. This property can be
       used to mark the pins which should not be configured for GPIO. Please see
       the ../gpio/gpio.txt for more information.
 
@@ -113,7 +113,7 @@ examples:
             gpio-controller;
             #gpio-cells = <2>;
 
-            rohm,charger-sense-resistor-ohms = <10000000>;
+            rohm,charger-sense-resistor-micro-ohms = <10000>;
 
             regulators {
                 buck1: buck1 {
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml
index 9fce8cd7b0b6..d24950ccea95 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml
+++ linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml
@@ -41,7 +41,7 @@ properties:
 patternProperties:
   "^sdhci@[0-9a-f]+$":
     type: object
-    $ref: mmc-controller.yaml
+    $ref: sdhci-common.yaml
     unevaluatedProperties: false
 
     properties:
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/mmc/mmc-controller.yaml linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
index 58ae298cd2fc..23884b8184a9 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
+++ linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
@@ -25,7 +25,7 @@ properties:
   "#address-cells":
     const: 1
     description: |
-      The cell is the slot ID if a function subnode is used.
+      The cell is the SDIO function number if a function subnode is used.
 
   "#size-cells":
     const: 0
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/net/can/renesas,rcar-canfd.yaml linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/net/can/renesas,rcar-canfd.yaml
index 7c5ac5d2e880..f6884f6e59e7 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/net/can/renesas,rcar-canfd.yaml
+++ linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/net/can/renesas,rcar-canfd.yaml
@@ -170,7 +170,7 @@ allOf:
             const: renesas,r8a779h0-canfd
     then:
       patternProperties:
-        "^channel[5-7]$": false
+        "^channel[4-7]$": false
     else:
       if:
         not:
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/net/fsl,fec.yaml linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/net/fsl,fec.yaml
index 5536c06139ca..24e863fdbdab 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/net/fsl,fec.yaml
+++ linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/net/fsl,fec.yaml
@@ -183,6 +183,13 @@ properties:
     description:
       Register bits of stop mode control, the format is <&gpr req_gpr req_bit>.
 
+  fsl,pps-channel:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
+    description:
+      Specifies to which timer instance the PPS signal is routed.
+    enum: [0, 1, 2, 3]
+
   mdio:
     $ref: mdio.yaml#
     unevaluatedProperties: false
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/pci/amlogic,axg-pcie.yaml linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/pci/amlogic,axg-pcie.yaml
index 79a21ba0f9fd..c8258ef40328 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/pci/amlogic,axg-pcie.yaml
+++ linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/pci/amlogic,axg-pcie.yaml
@@ -36,13 +36,13 @@ properties:
 
   reg:
     items:
-      - description: External local bus interface registers
+      - description: Data Bus Interface registers
       - description: Meson designed configuration registers
       - description: PCIe configuration space
 
   reg-names:
     items:
-      - const: elbi
+      - const: dbi
       - const: cfg
       - const: config
 
@@ -113,7 +113,7 @@ examples:
     pcie: pcie@f9800000 {
         compatible = "amlogic,axg-pcie", "snps,dw-pcie";
         reg = <0xf9800000 0x400000>, <0xff646000 0x2000>, <0xf9f00000 0x100000>;
-        reg-names = "elbi", "cfg", "config";
+        reg-names = "dbi", "cfg", "config";
         interrupts = <GIC_SPI 177 IRQ_TYPE_EDGE_RISING>;
         clocks = <&pclk>, <&clk_port>, <&clk_phy>;
         clock-names = "pclk", "port", "general";
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml
index 898c1be2d6a4..f05aab2b1add 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml
+++ linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml
@@ -149,7 +149,7 @@ allOf:
     then:
       properties:
         clocks:
-          minItems: 4
+          minItems: 6
 
         clock-names:
           items:
@@ -178,7 +178,7 @@ allOf:
     then:
       properties:
         clocks:
-          minItems: 4
+          minItems: 6
 
         clock-names:
           items:
@@ -207,6 +207,7 @@ allOf:
       properties:
         clocks:
           minItems: 4
+          maxItems: 4
 
         clock-names:
           items:
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sc7280.yaml linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sc7280.yaml
index 76cb9fbfd476..d5286e7cc573 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sc7280.yaml
+++ linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sc7280.yaml
@@ -74,6 +74,11 @@ properties:
     items:
       - const: pci
 
+required:
+  - power-domains
+  - resets
+  - reset-names
+
 allOf:
   - $ref: qcom,pcie-common.yaml#
 
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sc8280xp.yaml linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sc8280xp.yaml
index 15ba2385eb73..b6fb0e37cec5 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sc8280xp.yaml
+++ linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sc8280xp.yaml
@@ -61,6 +61,9 @@ properties:
 required:
   - interconnects
   - interconnect-names
+  - power-domains
+  - resets
+  - reset-names
 
 allOf:
   - $ref: qcom,pcie-common.yaml#
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sm8150.yaml linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sm8150.yaml
index 9d569644fda9..e5fa110dce80 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sm8150.yaml
+++ linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sm8150.yaml
@@ -69,6 +69,11 @@ properties:
     items:
       - const: pci
 
+required:
+  - power-domains
+  - resets
+  - reset-names
+
 allOf:
   - $ref: qcom,pcie-common.yaml#
 
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sm8250.yaml linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sm8250.yaml
index 4d060bce6f9d..ddcaddc7602f 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sm8250.yaml
+++ linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sm8250.yaml
@@ -81,6 +81,11 @@ properties:
     items:
       - const: pci
 
+required:
+  - power-domains
+  - resets
+  - reset-names
+
 allOf:
   - $ref: qcom,pcie-common.yaml#
 
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sm8350.yaml linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sm8350.yaml
index 2a4cc41fc710..0069919b9424 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sm8350.yaml
+++ linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sm8350.yaml
@@ -71,6 +71,11 @@ properties:
     items:
       - const: pci
 
+required:
+  - power-domains
+  - resets
+  - reset-names
+
 allOf:
   - $ref: qcom,pcie-common.yaml#
 
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sm8450.yaml linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sm8450.yaml
index 46bd59eefadb..790b11e6763a 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sm8450.yaml
+++ linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sm8450.yaml
@@ -81,6 +81,11 @@ properties:
     items:
       - const: pci
 
+required:
+  - power-domains
+  - resets
+  - reset-names
+
 allOf:
   - $ref: qcom,pcie-common.yaml#
 
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sm8550.yaml linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sm8550.yaml
index 24cb38673581..ff031929525b 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sm8550.yaml
+++ linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sm8550.yaml
@@ -78,6 +78,11 @@ properties:
       - const: pci # PCIe core reset
       - const: link_down # PCIe link down reset
 
+required:
+  - power-domains
+  - resets
+  - reset-names
+
 allOf:
   - $ref: qcom,pcie-common.yaml#
 
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml
index dc3a3f709fea..bac4d0b51d8a 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml
+++ linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml
@@ -58,8 +58,7 @@ properties:
   fsl,phy-tx-vboost-level-microvolt:
     description:
       Adjust the boosted transmit launch pk-pk differential amplitude
-    minimum: 880
-    maximum: 1120
+    enum: [844, 1008, 1156]
 
   fsl,phy-comp-dis-tune-percent:
     description:
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml
index 4e15d90d08b0..27d6bbed5da0 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml
+++ linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml
@@ -31,12 +31,15 @@ properties:
       - description: PLL register block
 
   clocks:
-    maxItems: 2
+    minItems: 2
+    maxItems: 3
 
   clock-names:
+    minItems: 2
     items:
       - const: aux
       - const: cfg_ahb
+      - const: ref
 
   "#clock-cells":
     const: 1
@@ -58,6 +61,29 @@ required:
   - "#clock-cells"
   - "#phy-cells"
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,x1e80100-dp-phy
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          minItems: 3
+          maxItems: 3
+    else:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          minItems: 2
+          maxItems: 2
+
 additionalProperties: false
 
 examples:
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/phy/rockchip-inno-csi-dphy.yaml linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/phy/rockchip-inno-csi-dphy.yaml
index 5ac994b3c0aa..b304bc5a08c4 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/phy/rockchip-inno-csi-dphy.yaml
+++ linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/phy/rockchip-inno-csi-dphy.yaml
@@ -57,11 +57,24 @@ required:
   - clocks
   - clock-names
   - '#phy-cells'
-  - power-domains
   - resets
   - reset-names
   - rockchip,grf
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - rockchip,px30-csi-dphy
+              - rockchip,rk1808-csi-dphy
+              - rockchip,rk3326-csi-dphy
+              - rockchip,rk3368-csi-dphy
+    then:
+      required:
+        - power-domains
+
 additionalProperties: false
 
 examples:
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-wakeup-interrupt.yaml linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-wakeup-interrupt.yaml
index 4dfb49b0e07f..f82a3c7e6c29 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-wakeup-interrupt.yaml
+++ linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-wakeup-interrupt.yaml
@@ -91,14 +91,17 @@ allOf:
   - if:
       properties:
         compatible:
-          # Match without "contains", to skip newer variants which are still
-          # compatible with samsung,exynos7-wakeup-eint
-          enum:
-            - samsung,s5pv210-wakeup-eint
-            - samsung,exynos4210-wakeup-eint
-            - samsung,exynos5433-wakeup-eint
-            - samsung,exynos7-wakeup-eint
-            - samsung,exynos7885-wakeup-eint
+          oneOf:
+            # Match without "contains", to skip newer variants which are still
+            # compatible with samsung,exynos7-wakeup-eint
+            - enum:
+                - samsung,exynos4210-wakeup-eint
+                - samsung,exynos7-wakeup-eint
+                - samsung,s5pv210-wakeup-eint
+            - contains:
+                enum:
+                  - samsung,exynos5433-wakeup-eint
+                  - samsung,exynos7885-wakeup-eint
     then:
       properties:
         interrupts:
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/pinctrl/toshiba,visconti-pinctrl.yaml linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/pinctrl/toshiba,visconti-pinctrl.yaml
index 19d47fd414bc..ce04d2eadec9 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/pinctrl/toshiba,visconti-pinctrl.yaml
+++ linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/pinctrl/toshiba,visconti-pinctrl.yaml
@@ -50,18 +50,20 @@ patternProperties:
       groups:
         description:
           Name of the pin group to use for the functions.
-        $ref: /schemas/types.yaml#/definitions/string
-        enum: [i2c0_grp, i2c1_grp, i2c2_grp, i2c3_grp, i2c4_grp,
-               i2c5_grp, i2c6_grp, i2c7_grp, i2c8_grp,
-               spi0_grp, spi0_cs0_grp, spi0_cs1_grp, spi0_cs2_grp,
-               spi1_grp, spi2_grp, spi3_grp, spi4_grp, spi5_grp, spi6_grp,
-               uart0_grp, uart1_grp, uart2_grp, uart3_grp,
-               pwm0_gpio4_grp, pwm0_gpio8_grp, pwm0_gpio12_grp,
-               pwm0_gpio16_grp, pwm1_gpio5_grp, pwm1_gpio9_grp,
-               pwm1_gpio13_grp, pwm1_gpio17_grp, pwm2_gpio6_grp,
-               pwm2_gpio10_grp, pwm2_gpio14_grp, pwm2_gpio18_grp,
-               pwm3_gpio7_grp, pwm3_gpio11_grp, pwm3_gpio15_grp,
-               pwm3_gpio19_grp, pcmif_out_grp, pcmif_in_grp]
+        items:
+          enum: [i2c0_grp, i2c1_grp, i2c2_grp, i2c3_grp, i2c4_grp,
+                 i2c5_grp, i2c6_grp, i2c7_grp, i2c8_grp,
+                 spi0_grp, spi0_cs0_grp, spi0_cs1_grp, spi0_cs2_grp,
+                 spi1_grp, spi2_grp, spi3_grp, spi4_grp, spi5_grp, spi6_grp,
+                 uart0_grp, uart1_grp, uart2_grp, uart3_grp,
+                 pwm0_gpio4_grp, pwm0_gpio8_grp, pwm0_gpio12_grp,
+                 pwm0_gpio16_grp, pwm1_gpio5_grp, pwm1_gpio9_grp,
+                 pwm1_gpio13_grp, pwm1_gpio17_grp, pwm2_gpio6_grp,
+                 pwm2_gpio10_grp, pwm2_gpio14_grp, pwm2_gpio18_grp,
+                 pwm3_gpio7_grp, pwm3_gpio11_grp, pwm3_gpio15_grp,
+                 pwm3_gpio19_grp, pcmif_out_grp, pcmif_in_grp]
+        minItems: 1
+        maxItems: 8
 
       drive-strength:
         enum: [2, 4, 6, 8, 16, 24, 32]
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml
index 929b7ef9c1bc..d55758a75971 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml
+++ linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml
@@ -58,6 +58,7 @@ properties:
           - qcom,sm8450-rpmhpd
           - qcom,sm8550-rpmhpd
           - qcom,sm8650-rpmhpd
+          - qcom,sm8750-rpmhpd
           - qcom,x1e80100-rpmhpd
       - items:
           - enum:
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/pwm/adi,axi-pwmgen.yaml linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/pwm/adi,axi-pwmgen.yaml
index ec6115d3796b..5575c58357d6 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/pwm/adi,axi-pwmgen.yaml
+++ linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/pwm/adi,axi-pwmgen.yaml
@@ -27,22 +27,31 @@ properties:
     maxItems: 1
 
   "#pwm-cells":
-    const: 2
+    const: 3
 
   clocks:
-    maxItems: 1
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: axi
+      - const: ext
 
 required:
   - reg
   - clocks
+  - clock-names
 
 unevaluatedProperties: false
 
 examples:
   - |
     pwm@44b00000 {
-       compatible = "adi,axi-pwmgen-2.00.a";
-       reg = <0x44b00000 0x1000>;
-       clocks = <&spi_clk>;
-       #pwm-cells = <2>;
+        compatible = "adi,axi-pwmgen-2.00.a";
+        reg = <0x44b00000 0x1000>;
+        clocks = <&fpga_clk>, <&spi_clk>;
+        clock-names = "axi", "ext";
+        #pwm-cells = <3>;
     };
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/pwm/brcm,bcm7038-pwm.yaml linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/pwm/brcm,bcm7038-pwm.yaml
index 119de3d7f9dd..44548a9da158 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/pwm/brcm,bcm7038-pwm.yaml
+++ linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/pwm/brcm,bcm7038-pwm.yaml
@@ -35,8 +35,8 @@ additionalProperties: false
 examples:
   - |
     pwm: pwm@f0408000 {
-       compatible = "brcm,bcm7038-pwm";
-       reg = <0xf0408000 0x28>;
-       #pwm-cells = <2>;
-       clocks = <&upg_fixed>;
+        compatible = "brcm,bcm7038-pwm";
+        reg = <0xf0408000 0x28>;
+        #pwm-cells = <2>;
+        clocks = <&upg_fixed>;
     };
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/pwm/brcm,kona-pwm.yaml linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/pwm/brcm,kona-pwm.yaml
index e86c8053b366..fd785da5d3d7 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/pwm/brcm,kona-pwm.yaml
+++ linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/pwm/brcm,kona-pwm.yaml
@@ -43,9 +43,9 @@ examples:
     #include <dt-bindings/clock/bcm281xx.h>
 
     pwm@3e01a000 {
-       compatible = "brcm,bcm11351-pwm", "brcm,kona-pwm";
-       reg = <0x3e01a000 0xcc>;
-       clocks = <&slave_ccu BCM281XX_SLAVE_CCU_PWM>;
-       #pwm-cells = <3>;
+        compatible = "brcm,bcm11351-pwm", "brcm,kona-pwm";
+        reg = <0x3e01a000 0xcc>;
+        clocks = <&slave_ccu BCM281XX_SLAVE_CCU_PWM>;
+        #pwm-cells = <3>;
     };
 ...
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/regulator/mediatek,mt6357-regulator.yaml linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/regulator/mediatek,mt6357-regulator.yaml
index 6327bb2f6ee0..698266c09e25 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/regulator/mediatek,mt6357-regulator.yaml
+++ linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/regulator/mediatek,mt6357-regulator.yaml
@@ -33,7 +33,7 @@ patternProperties:
 
   "^ldo-v(camio18|aud28|aux18|io18|io28|rf12|rf18|cn18|cn28|fe28)$":
     type: object
-    $ref: fixed-regulator.yaml#
+    $ref: regulator.yaml#
     unevaluatedProperties: false
     description:
       Properties for single fixed LDO regulator.
@@ -112,7 +112,6 @@ examples:
           regulator-enable-ramp-delay = <220>;
         };
         mt6357_vfe28_reg: ldo-vfe28 {
-          compatible = "regulator-fixed";
           regulator-name = "vfe28";
           regulator-min-microvolt = <2800000>;
           regulator-max-microvolt = <2800000>;
@@ -125,14 +124,12 @@ examples:
           regulator-enable-ramp-delay = <110>;
         };
         mt6357_vrf18_reg: ldo-vrf18 {
-          compatible = "regulator-fixed";
           regulator-name = "vrf18";
           regulator-min-microvolt = <1800000>;
           regulator-max-microvolt = <1800000>;
           regulator-enable-ramp-delay = <110>;
         };
         mt6357_vrf12_reg: ldo-vrf12 {
-          compatible = "regulator-fixed";
           regulator-name = "vrf12";
           regulator-min-microvolt = <1200000>;
           regulator-max-microvolt = <1200000>;
@@ -157,14 +154,12 @@ examples:
           regulator-enable-ramp-delay = <264>;
         };
         mt6357_vcn28_reg: ldo-vcn28 {
-          compatible = "regulator-fixed";
           regulator-name = "vcn28";
           regulator-min-microvolt = <2800000>;
           regulator-max-microvolt = <2800000>;
           regulator-enable-ramp-delay = <264>;
         };
         mt6357_vcn18_reg: ldo-vcn18 {
-          compatible = "regulator-fixed";
           regulator-name = "vcn18";
           regulator-min-microvolt = <1800000>;
           regulator-max-microvolt = <1800000>;
@@ -183,7 +178,6 @@ examples:
           regulator-enable-ramp-delay = <264>;
         };
         mt6357_vcamio_reg: ldo-vcamio18 {
-          compatible = "regulator-fixed";
           regulator-name = "vcamio";
           regulator-min-microvolt = <1800000>;
           regulator-max-microvolt = <1800000>;
@@ -212,28 +206,24 @@ examples:
           regulator-always-on;
         };
         mt6357_vaux18_reg: ldo-vaux18 {
-          compatible = "regulator-fixed";
           regulator-name = "vaux18";
           regulator-min-microvolt = <1800000>;
           regulator-max-microvolt = <1800000>;
           regulator-enable-ramp-delay = <264>;
         };
         mt6357_vaud28_reg: ldo-vaud28 {
-          compatible = "regulator-fixed";
           regulator-name = "vaud28";
           regulator-min-microvolt = <2800000>;
           regulator-max-microvolt = <2800000>;
           regulator-enable-ramp-delay = <264>;
         };
         mt6357_vio28_reg: ldo-vio28 {
-          compatible = "regulator-fixed";
           regulator-name = "vio28";
           regulator-min-microvolt = <2800000>;
           regulator-max-microvolt = <2800000>;
           regulator-enable-ramp-delay = <264>;
         };
         mt6357_vio18_reg: ldo-vio18 {
-          compatible = "regulator-fixed";
           regulator-name = "vio18";
           regulator-min-microvolt = <1800000>;
           regulator-max-microvolt = <1800000>;
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml
index cd4aa27218a1..fa6743bb269d 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml
+++ linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml
@@ -35,10 +35,6 @@ properties:
         $ref: regulator.yaml#
         unevaluatedProperties: false
 
-        properties:
-          regulator-compatible:
-            pattern: "^vbuck[1-4]$"
-
     additionalProperties: false
 
 required:
@@ -56,7 +52,6 @@ examples:
 
       regulators {
         vbuck1 {
-          regulator-compatible = "vbuck1";
           regulator-min-microvolt = <300000>;
           regulator-max-microvolt = <1193750>;
           regulator-enable-ramp-delay = <256>;
@@ -64,7 +59,6 @@ examples:
         };
 
         vbuck3 {
-          regulator-compatible = "vbuck3";
           regulator-min-microvolt = <300000>;
           regulator-max-microvolt = <1193750>;
           regulator-enable-ramp-delay = <256>;
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml
index f2fd2df68a9e..b7241ce975b9 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml
+++ linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml
@@ -22,7 +22,7 @@ description:
   Each sub-node is identified using the node's name, with valid values listed
   for each of the pmics below.
 
-  For mp5496, s1, s2
+  For mp5496, s1, s2, l2, l5
 
   For pm2250, s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11,
   l12, l13, l14, l15, l16, l17, l18, l19, l20, l21, l22
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/serial/8250.yaml linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/serial/8250.yaml
index 692aa05500fd..6ba0325039be 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/serial/8250.yaml
+++ linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/serial/8250.yaml
@@ -45,7 +45,7 @@ allOf:
                   - ns16550
                   - ns16550a
     then:
-      anyOf:
+      oneOf:
         - required: [ clock-frequency ]
         - required: [ clocks ]
 
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/serial/brcm,bcm7271-uart.yaml linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/serial/brcm,bcm7271-uart.yaml
index 89c462653e2d..8cc848ae11cb 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/serial/brcm,bcm7271-uart.yaml
+++ linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/serial/brcm,bcm7271-uart.yaml
@@ -41,7 +41,7 @@ properties:
           - const: dma_intr2
 
   clocks:
-    minItems: 1
+    maxItems: 1
 
   clock-names:
     const: sw_baud
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/serial/rs485.yaml linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/serial/rs485.yaml
index 9418fd66a8e9..b93254ad2a28 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/serial/rs485.yaml
+++ linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/serial/rs485.yaml
@@ -18,16 +18,15 @@ properties:
     description: prop-encoded-array <a b>
     $ref: /schemas/types.yaml#/definitions/uint32-array
     items:
-      items:
-        - description: Delay between rts signal and beginning of data sent in
-            milliseconds. It corresponds to the delay before sending data.
-          default: 0
-          maximum: 100
-        - description: Delay between end of data sent and rts signal in milliseconds.
-            It corresponds to the delay after sending data and actual release
-            of the line.
-          default: 0
-          maximum: 100
+      - description: Delay between rts signal and beginning of data sent in
+          milliseconds. It corresponds to the delay before sending data.
+        default: 0
+        maximum: 100
+      - description: Delay between end of data sent and rts signal in milliseconds.
+          It corresponds to the delay after sending data and actual release
+          of the line.
+        default: 0
+        maximum: 100
 
   rs485-rts-active-high:
     description: drive RTS high when sending (this is the default).
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/soc/fsl/fsl,ls1028a-reset.yaml linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/soc/fsl/fsl,ls1028a-reset.yaml
index 31295be91013..234089b5954d 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/soc/fsl/fsl,ls1028a-reset.yaml
+++ linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/soc/fsl/fsl,ls1028a-reset.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Freescale Layerscape Reset Registers Module
 
 maintainers:
-  - Frank Li
+  - Frank Li <Frank.Li@nxp.com>
 
 description:
   Reset Module includes chip reset, service processor control and Reset Control
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/soc/fsl/fsl,qman-fqd.yaml linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/soc/fsl/fsl,qman-fqd.yaml
index de0b4ae740ff..a975bce59975 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/soc/fsl/fsl,qman-fqd.yaml
+++ linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/soc/fsl/fsl,qman-fqd.yaml
@@ -50,7 +50,7 @@ required:
   - compatible
 
 allOf:
-  - $ref: reserved-memory.yaml
+  - $ref: /schemas/reserved-memory/reserved-memory.yaml
 
 unevaluatedProperties: false
 
@@ -61,7 +61,7 @@ examples:
         #size-cells = <2>;
 
         qman-fqd {
-            compatible = "shared-dma-pool";
+            compatible = "fsl,qman-fqd";
             size = <0 0x400000>;
             alignment = <0 0x400000>;
             no-map;
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/sound/asahi-kasei,ak4458.yaml linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/sound/asahi-kasei,ak4458.yaml
index 4477f84b7acc..e44801ddbd2a 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/sound/asahi-kasei,ak4458.yaml
+++ linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/sound/asahi-kasei,ak4458.yaml
@@ -18,10 +18,10 @@ properties:
   reg:
     maxItems: 1
 
-  avdd-supply:
+  AVDD-supply:
     description: Analog power supply
 
-  dvdd-supply:
+  DVDD-supply:
     description: Digital power supply
 
   reset-gpios:
@@ -56,7 +56,7 @@ allOf:
       properties:
         dsd-path: false
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/sound/asahi-kasei,ak5558.yaml linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/sound/asahi-kasei,ak5558.yaml
index d3d494ae8abf..dc8f85f266bf 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/sound/asahi-kasei,ak5558.yaml
+++ linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/sound/asahi-kasei,ak5558.yaml
@@ -19,10 +19,10 @@ properties:
   reg:
     maxItems: 1
 
-  avdd-supply:
+  AVDD-supply:
     description: A 1.8V supply that powers up the AVDD pin.
 
-  dvdd-supply:
+  DVDD-supply:
     description: A 1.2V supply that powers up the DVDD pin.
 
   reset-gpios:
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/sound/mt6359.yaml linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/sound/mt6359.yaml
index 23d411fc4200..128698630c86 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/sound/mt6359.yaml
+++ linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/sound/mt6359.yaml
@@ -23,8 +23,8 @@ properties:
       Indicates how many data pins are used to transmit two channels of PDM
       signal. 0 means two wires, 1 means one wire. Default value is 0.
     enum:
-      - 0 # one wire
-      - 1 # two wires
+      - 0 # two wires
+      - 1 # one wire
 
   mediatek,mic-type-0:
     $ref: /schemas/types.yaml#/definitions/uint32
@@ -53,9 +53,9 @@ additionalProperties: false
 
 examples:
   - |
-    mt6359codec: mt6359codec {
-      mediatek,dmic-mode = <0>;
-      mediatek,mic-type-0 = <2>;
+    mt6359codec: audio-codec {
+        mediatek,dmic-mode = <0>;
+        mediatek,mic-type-0 = <2>;
     };
 
 ...
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/sound/realtek,rt5645.yaml linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/sound/realtek,rt5645.yaml
index 13f09f1bc800..0a698798c22b 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/sound/realtek,rt5645.yaml
+++ linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/sound/realtek,rt5645.yaml
@@ -51,7 +51,7 @@ properties:
     description: Power supply for AVDD, providing 1.8V.
 
   cpvdd-supply:
-    description: Power supply for CPVDD, providing 3.5V.
+    description: Power supply for CPVDD, providing 1.8V.
 
   hp-detect-gpios:
     description: 
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/ufs/mediatek,ufs.yaml linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/ufs/mediatek,ufs.yaml
index 32fd535a514a..20f341d25ebc 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/ufs/mediatek,ufs.yaml
+++ linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/ufs/mediatek,ufs.yaml
@@ -33,6 +33,10 @@ properties:
 
   vcc-supply: true
 
+  mediatek,ufs-disable-mcq:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: The mask to disable MCQ (Multi-Circular Queue) for UFS host.
+
 required:
   - compatible
   - clocks
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/usb/cypress,hx3.yaml linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/usb/cypress,hx3.yaml
index e44e88d993d0..e802e9ac975b 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/usb/cypress,hx3.yaml
+++ linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/usb/cypress,hx3.yaml
@@ -14,9 +14,22 @@ allOf:
 
 properties:
   compatible:
-    enum:
-      - usb4b4,6504
-      - usb4b4,6506
+    oneOf:
+      - enum:
+          - usb4b4,6504
+          - usb4b4,6506
+      - items:
+          - enum:
+              - usb4b4,6500
+              - usb4b4,6508
+          - const: usb4b4,6504
+      - items:
+          - enum:
+              - usb4b4,6502
+              - usb4b4,6503
+              - usb4b4,6507
+              - usb4b4,650a
+          - const: usb4b4,6506
 
   reg: true
 
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml
index 9ea1e4cd0709..69be6affa9b5 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml
+++ linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml
@@ -85,13 +85,21 @@ required:
   - reg
   - "#address-cells"
   - "#size-cells"
-  - dma-ranges
   - ranges
   - clocks
   - clock-names
   - interrupts
   - power-domains
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          const: fsl,imx8mp-dwc3
+    then:
+      required:
+        - dma-ranges
+
 additionalProperties: false
 
 examples:
diff --git linux-libre-6.12-gnu/Documentation/devicetree/bindings/vendor-prefixes.yaml linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/vendor-prefixes.yaml
index b320a39de7fe..af9a8d43b247 100644
--- linux-libre-6.12-gnu/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ linux-libre-6.12.79-gnu/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -581,6 +581,8 @@ patternProperties:
     description: GlobalTop Technology, Inc.
   "^gmt,.*":
     description: Global Mixed-mode Technology, Inc.
+  "^gocontroll,.*":
+    description: GOcontroll Modular Embedded Electronics B.V.
   "^goldelico,.*":
     description: Golden Delicious Computers GmbH & Co. KG
   "^goodix,.*":
@@ -844,6 +846,8 @@ patternProperties:
     description: Linux-specific binding
   "^linx,.*":
     description: Linx Technologies
+  "^liontron,.*":
+    description: Shenzhen Liontron Technology Co., Ltd
   "^liteon,.*":
     description: LITE-ON Technology Corp.
   "^litex,.*":
@@ -1013,6 +1017,8 @@ patternProperties:
     description: Shanghai Neardi Technology Co., Ltd.
   "^nec,.*":
     description: NEC LCD Technologies, Ltd.
+  "^neofidelity,.*":
+    description: Neofidelity Inc.
   "^neonode,.*":
     description: Neonode Inc.
   "^netgear,.*":
diff --git linux-libre-6.12-gnu/Documentation/driver-api/crypto/iaa/iaa-crypto.rst linux-libre-6.12.79-gnu/Documentation/driver-api/crypto/iaa/iaa-crypto.rst
index bba40158dd5c..8e50b900d51c 100644
--- linux-libre-6.12-gnu/Documentation/driver-api/crypto/iaa/iaa-crypto.rst
+++ linux-libre-6.12.79-gnu/Documentation/driver-api/crypto/iaa/iaa-crypto.rst
@@ -272,7 +272,7 @@ The available attributes are:
       echo async_irq > /sys/bus/dsa/drivers/crypto/sync_mode
 
     Async mode without interrupts (caller must poll) can be enabled by
-    writing 'async' to it::
+    writing 'async' to it (please see Caveat)::
 
       echo async > /sys/bus/dsa/drivers/crypto/sync_mode
 
@@ -283,6 +283,13 @@ The available attributes are:
 
     The default mode is 'sync'.
 
+    Caveat: since the only mechanism that iaa_crypto currently implements
+    for async polling without interrupts is via the 'sync' mode as
+    described earlier, writing 'async' to
+    '/sys/bus/dsa/drivers/crypto/sync_mode' will internally enable the
+    'sync' mode. This is to ensure correct iaa_crypto behavior until true
+    async polling without interrupts is enabled in iaa_crypto.
+
 .. _iaa_default_config:
 
 IAA Default Configuration
diff --git linux-libre-6.12-gnu/Documentation/driver-api/gpio/index.rst linux-libre-6.12.79-gnu/Documentation/driver-api/gpio/index.rst
index 34b57cee3391..43f6a3afe10b 100644
--- linux-libre-6.12-gnu/Documentation/driver-api/gpio/index.rst
+++ linux-libre-6.12.79-gnu/Documentation/driver-api/gpio/index.rst
@@ -27,7 +27,7 @@ Core
 ACPI support
 ============
 
-.. kernel-doc:: drivers/gpio/gpiolib-acpi.c
+.. kernel-doc:: drivers/gpio/gpiolib-acpi-core.c
    :export:
 
 Device tree support
diff --git linux-libre-6.12-gnu/Documentation/driver-api/serial/driver.rst linux-libre-6.12.79-gnu/Documentation/driver-api/serial/driver.rst
index 84b43061c11b..60434f2b0286 100644
--- linux-libre-6.12-gnu/Documentation/driver-api/serial/driver.rst
+++ linux-libre-6.12.79-gnu/Documentation/driver-api/serial/driver.rst
@@ -103,4 +103,4 @@ Some helpers are provided in order to set/get modem control lines via GPIO.
 .. kernel-doc:: drivers/tty/serial/serial_mctrl_gpio.c
    :identifiers: mctrl_gpio_init mctrl_gpio_free mctrl_gpio_to_gpiod
            mctrl_gpio_set mctrl_gpio_get mctrl_gpio_enable_ms
-           mctrl_gpio_disable_ms
+           mctrl_gpio_disable_ms_sync mctrl_gpio_disable_ms_no_sync
diff --git linux-libre-6.12-gnu/Documentation/driver-api/soundwire/stream.rst linux-libre-6.12.79-gnu/Documentation/driver-api/soundwire/stream.rst
index 2a794484f62c..d66201299633 100644
--- linux-libre-6.12-gnu/Documentation/driver-api/soundwire/stream.rst
+++ linux-libre-6.12.79-gnu/Documentation/driver-api/soundwire/stream.rst
@@ -291,7 +291,7 @@ per stream. From ASoC DPCM framework, this stream state maybe linked to
 
 .. code-block:: c
 
-  int sdw_alloc_stream(char * stream_name);
+  int sdw_alloc_stream(char * stream_name, enum sdw_stream_type type);
 
 The SoundWire core provides a sdw_startup_stream() helper function,
 typically called during a dailink .startup() callback, which performs
diff --git linux-libre-6.12-gnu/Documentation/driver-api/tty/tty_port.rst linux-libre-6.12.79-gnu/Documentation/driver-api/tty/tty_port.rst
index 5cb90e954fcf..504a353f2682 100644
--- linux-libre-6.12-gnu/Documentation/driver-api/tty/tty_port.rst
+++ linux-libre-6.12.79-gnu/Documentation/driver-api/tty/tty_port.rst
@@ -42,9 +42,10 @@ TTY Refcounting
 TTY Helpers
 -----------
 
+.. kernel-doc::  include/linux/tty_port.h
+   :identifiers: tty_port_tty_hangup tty_port_tty_vhangup
 .. kernel-doc::  drivers/tty/tty_port.c
-   :identifiers: tty_port_tty_hangup tty_port_tty_wakeup
-
+   :identifiers: tty_port_tty_wakeup
 
 Modem Signals
 -------------
diff --git linux-libre-6.12-gnu/Documentation/filesystems/f2fs.rst linux-libre-6.12.79-gnu/Documentation/filesystems/f2fs.rst
index 68a0885fb5e6..fdf31514fb1c 100644
--- linux-libre-6.12-gnu/Documentation/filesystems/f2fs.rst
+++ linux-libre-6.12.79-gnu/Documentation/filesystems/f2fs.rst
@@ -235,9 +235,9 @@ usrjquota=<file>	 Appoint specified file and type during mount, so that quota
 grpjquota=<file>	 information can be properly updated during recovery flow,
 prjjquota=<file>	 <quota file>: must be in root directory;
 jqfmt=<quota type>	 <quota type>: [vfsold,vfsv0,vfsv1].
-offusrjquota		 Turn off user journalled quota.
-offgrpjquota		 Turn off group journalled quota.
-offprjjquota		 Turn off project journalled quota.
+usrjquota=		 Turn off user journalled quota.
+grpjquota=		 Turn off group journalled quota.
+prjjquota=		 Turn off project journalled quota.
 quota			 Enable plain user disk quota accounting.
 noquota			 Disable all plain disk quota option.
 alloc_mode=%s		 Adjust block allocation policy, which supports "reuse"
diff --git linux-libre-6.12-gnu/Documentation/filesystems/fscrypt.rst linux-libre-6.12.79-gnu/Documentation/filesystems/fscrypt.rst
index 04eaab01314b..b07368e949ae 100644
--- linux-libre-6.12-gnu/Documentation/filesystems/fscrypt.rst
+++ linux-libre-6.12.79-gnu/Documentation/filesystems/fscrypt.rst
@@ -141,9 +141,8 @@ However, these ioctls have some limitations:
   CONFIG_PAGE_POISONING=y in your kernel config and add page_poison=1
   to your kernel command line.  However, this has a performance cost.
 
-- Secret keys might still exist in CPU registers, in crypto
-  accelerator hardware (if used by the crypto API to implement any of
-  the algorithms), or in other places not explicitly considered here.
+- Secret keys might still exist in CPU registers or in other places
+  not explicitly considered here.
 
 Limitations of v1 policies
 ~~~~~~~~~~~~~~~~~~~~~~~~~~
@@ -378,9 +377,12 @@ the work is done by XChaCha12, which is much faster than AES when AES
 acceleration is unavailable.  For more information about Adiantum, see
 `the Adiantum paper <https://eprint.iacr.org/2018/720.pdf>`_.
 
-The (AES-128-CBC-ESSIV, AES-128-CBC-CTS) pair exists only to support
-systems whose only form of AES acceleration is an off-CPU crypto
-accelerator such as CAAM or CESA that does not support XTS.
+The (AES-128-CBC-ESSIV, AES-128-CBC-CTS) pair was added to try to
+provide a more efficient option for systems that lack AES instructions
+in the CPU but do have a non-inline crypto engine such as CAAM or CESA
+that supports AES-CBC (and not AES-XTS).  This is deprecated.  It has
+been shown that just doing AES on the CPU is actually faster.
+Moreover, Adiantum is faster still and is recommended on such systems.
 
 The remaining mode pairs are the "national pride ciphers":
 
@@ -1289,22 +1291,13 @@ this by validating all top-level encryption policies prior to access.
 Inline encryption support
 =========================
 
-By default, fscrypt uses the kernel crypto API for all cryptographic
-operations (other than HKDF, which fscrypt partially implements
-itself).  The kernel crypto API supports hardware crypto accelerators,
-but only ones that work in the traditional way where all inputs and
-outputs (e.g. plaintexts and ciphertexts) are in memory.  fscrypt can
-take advantage of such hardware, but the traditional acceleration
-model isn't particularly efficient and fscrypt hasn't been optimized
-for it.
-
-Instead, many newer systems (especially mobile SoCs) have *inline
-encryption hardware* that can encrypt/decrypt data while it is on its
-way to/from the storage device.  Linux supports inline encryption
-through a set of extensions to the block layer called *blk-crypto*.
-blk-crypto allows filesystems to attach encryption contexts to bios
-(I/O requests) to specify how the data will be encrypted or decrypted
-in-line.  For more information about blk-crypto, see
+Many newer systems (especially mobile SoCs) have *inline encryption
+hardware* that can encrypt/decrypt data while it is on its way to/from
+the storage device.  Linux supports inline encryption through a set of
+extensions to the block layer called *blk-crypto*.  blk-crypto allows
+filesystems to attach encryption contexts to bios (I/O requests) to
+specify how the data will be encrypted or decrypted in-line.  For more
+information about blk-crypto, see
 :ref:`Documentation/block/inline-encryption.rst <inline_encryption>`.
 
 On supported filesystems (currently ext4 and f2fs), fscrypt can use
diff --git linux-libre-6.12-gnu/Documentation/filesystems/mount_api.rst linux-libre-6.12.79-gnu/Documentation/filesystems/mount_api.rst
index 317934c9e8fc..d92c276f1575 100644
--- linux-libre-6.12-gnu/Documentation/filesystems/mount_api.rst
+++ linux-libre-6.12.79-gnu/Documentation/filesystems/mount_api.rst
@@ -770,7 +770,8 @@ process the parameters it is given.
 
    * ::
 
-       bool fs_validate_description(const struct fs_parameter_description *desc);
+       bool fs_validate_description(const char *name,
+                                    const struct fs_parameter_description *desc);
 
      This performs some validation checks on a parameter description.  It
      returns true if the description is good and false if it is not.  It will
diff --git linux-libre-6.12-gnu/Documentation/filesystems/nfs/localio.rst linux-libre-6.12.79-gnu/Documentation/filesystems/nfs/localio.rst
index bd1967e2eab3..7d2dbf75e96d 100644
--- linux-libre-6.12-gnu/Documentation/filesystems/nfs/localio.rst
+++ linux-libre-6.12.79-gnu/Documentation/filesystems/nfs/localio.rst
@@ -218,64 +218,30 @@ NFS Client and Server Interlock
 ===============================
 
 LOCALIO provides the nfs_uuid_t object and associated interfaces to
-allow proper network namespace (net-ns) and NFSD object refcounting:
-
-    We don't want to keep a long-term counted reference on each NFSD's
-    net-ns in the client because that prevents a server container from
-    completely shutting down.
-
-    So we avoid taking a reference at all and rely on the per-cpu
-    reference to the server (detailed below) being sufficient to keep
-    the net-ns active. This involves allowing the NFSD's net-ns exit
-    code to iterate all active clients and clear their ->net pointers
-    (which are needed to find the per-cpu-refcount for the nfsd_serv).
-
-    Details:
-
-     - Embed nfs_uuid_t in nfs_client. nfs_uuid_t provides a list_head
-       that can be used to find the client. It does add the 16-byte
-       uuid_t to nfs_client so it is bigger than needed (given that
-       uuid_t is only used during the initial NFS client and server
-       LOCALIO handshake to determine if they are local to each other).
-       If that is really a problem we can find a fix.
-
-     - When the nfs server confirms that the uuid_t is local, it moves
-       the nfs_uuid_t onto a per-net-ns list in NFSD's nfsd_net.
-
-     - When each server's net-ns is shutting down - in a "pre_exit"
-       handler, all these nfs_uuid_t have their ->net cleared. There is
-       an rcu_synchronize() call between pre_exit() handlers and exit()
-       handlers so any caller that sees nfs_uuid_t ->net as not NULL can
-       safely manage the per-cpu-refcount for nfsd_serv.
-
-     - The client's nfs_uuid_t is passed to nfsd_open_local_fh() so it
-       can safely dereference ->net in a private rcu_read_lock() section
-       to allow safe access to the associated nfsd_net and nfsd_serv.
-
-So LOCALIO required the introduction and use of NFSD's percpu_ref to
-interlock nfsd_destroy_serv() and nfsd_open_local_fh(), to ensure each
-nn->nfsd_serv is not destroyed while in use by nfsd_open_local_fh(), and
+allow proper network namespace (net-ns) and NFSD object refcounting.
+
+LOCALIO required the introduction and use of NFSD's percpu nfsd_net_ref
+to interlock nfsd_shutdown_net() and nfsd_open_local_fh(), to ensure
+each net-ns is not destroyed while in use by nfsd_open_local_fh(), and
 warrants a more detailed explanation:
 
-    nfsd_open_local_fh() uses nfsd_serv_try_get() before opening its
+    nfsd_open_local_fh() uses nfsd_net_try_get() before opening its
     nfsd_file handle and then the caller (NFS client) must drop the
-    reference for the nfsd_file and associated nn->nfsd_serv using
-    nfs_file_put_local() once it has completed its IO.
+    reference for the nfsd_file and associated net-ns using
+    nfsd_file_put_local() once it has completed its IO.
 
     This interlock working relies heavily on nfsd_open_local_fh() being
     afforded the ability to safely deal with the possibility that the
     NFSD's net-ns (and nfsd_net by association) may have been destroyed
-    by nfsd_destroy_serv() via nfsd_shutdown_net() -- which is only
-    possible given the nfs_uuid_t ->net pointer managemenet detailed
-    above.
-
-All told, this elaborate interlock of the NFS client and server has been
-verified to fix an easy to hit crash that would occur if an NFSD
-instance running in a container, with a LOCALIO client mounted, is
-shutdown. Upon restart of the container and associated NFSD the client
-would go on to crash due to NULL pointer dereference that occurred due
-to the LOCALIO client's attempting to nfsd_open_local_fh(), using
-nn->nfsd_serv, without having a proper reference on nn->nfsd_serv.
+    by nfsd_destroy_serv() via nfsd_shutdown_net().
+
+This interlock of the NFS client and server has been verified to fix an
+easy to hit crash that would occur if an NFSD instance running in a
+container, with a LOCALIO client mounted, is shutdown. Upon restart of
+the container and associated NFSD, the client would go on to crash due
+to NULL pointer dereference that occurred due to the LOCALIO client's
+attempting to nfsd_open_local_fh() without having a proper reference on
+NFSD's net-ns.
 
 NFS Client issues IO instead of Server
 ======================================
@@ -306,6 +272,22 @@ is issuing IO to the underlying local filesystem that it is sharing with
 the NFS server. See: fs/nfs/localio.c:nfs_local_doio() and
 fs/nfs/localio.c:nfs_local_commit().
 
+With normal NFS that makes use of RPC to issue IO to the server, if an
+application uses O_DIRECT the NFS client will bypass the pagecache but
+the NFS server will not. The NFS server's use of buffered IO affords
+applications to be less precise with their alignment when issuing IO to
+the NFS client. But if all applications properly align their IO, LOCALIO
+can be configured to use end-to-end O_DIRECT semantics from the NFS
+client to the underlying local filesystem, that it is sharing with
+the NFS server, by setting the 'localio_O_DIRECT_semantics' nfs module
+parameter to Y, e.g.:
+
+    echo Y > /sys/module/nfs/parameters/localio_O_DIRECT_semantics
+
+Once enabled, it will cause LOCALIO to use end-to-end O_DIRECT semantics
+(but again, this may cause IO to fail if applications do not properly
+align their IO).
+
 Security
 ========
 
diff --git linux-libre-6.12-gnu/Documentation/firmware-guide/acpi/dsd/data-node-references.rst linux-libre-6.12.79-gnu/Documentation/firmware-guide/acpi/dsd/data-node-references.rst
index 8d8b53e96bcf..ccb4b153e6f2 100644
--- linux-libre-6.12-gnu/Documentation/firmware-guide/acpi/dsd/data-node-references.rst
+++ linux-libre-6.12.79-gnu/Documentation/firmware-guide/acpi/dsd/data-node-references.rst
@@ -12,11 +12,14 @@ ACPI in general allows referring to device objects in the tree only.
 Hierarchical data extension nodes may not be referred to directly, hence this
 document defines a scheme to implement such references.
 
-A reference consist of the device object name followed by one or more
-hierarchical data extension [dsd-guide] keys. Specifically, the hierarchical
-data extension node which is referred to by the key shall lie directly under
-the parent object i.e. either the device object or another hierarchical data
-extension node.
+A reference to a _DSD hierarchical data node is a string consisting of a
+device object reference followed by a dot (".") and a relative path to a data
+node object. Do not use non-string references as this will produce a copy of
+the hierarchical data node, not a reference!
+
+The hierarchical data extension node which is referred to shall be located
+directly under its parent object i.e. either the device object or another
+hierarchical data extension node [dsd-guide].
 
 The keys in the hierarchical data nodes shall consist of the name of the node,
 "@" character and the number of the node in hexadecimal notation (without pre-
@@ -33,11 +36,9 @@ extension key.
 Example
 =======
 
-In the ASL snippet below, the "reference" _DSD property contains a
-device object reference to DEV0 and under that device object, a
-hierarchical data extension key "node@1" referring to the NOD1 object
-and lastly, a hierarchical data extension key "anothernode" referring to
-the ANOD object which is also the final target node of the reference.
+In the ASL snippet below, the "reference" _DSD property contains a string
+reference to a hierarchical data extension node ANOD under DEV0 under the parent
+of DEV1. ANOD is also the final target node of the reference.
 ::
 
 	Device (DEV0)
@@ -76,10 +77,7 @@ the ANOD object which is also the final target node of the reference.
 	    Name (_DSD, Package () {
 		ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
 		Package () {
-		    Package () {
-			"reference", Package () {
-			    ^DEV0, "node@1", "anothernode"
-			}
+		    Package () { "reference", "^DEV0.ANOD" }
 		    },
 		}
 	    })
diff --git linux-libre-6.12-gnu/Documentation/firmware-guide/acpi/dsd/graph.rst linux-libre-6.12.79-gnu/Documentation/firmware-guide/acpi/dsd/graph.rst
index b9dbfc73ed25..d6ae5ffa748c 100644
--- linux-libre-6.12-gnu/Documentation/firmware-guide/acpi/dsd/graph.rst
+++ linux-libre-6.12.79-gnu/Documentation/firmware-guide/acpi/dsd/graph.rst
@@ -66,12 +66,9 @@ of that port shall be zero. Similarly, if a port may only have a single
 endpoint, the number of that endpoint shall be zero.
 
 The endpoint reference uses property extension with "remote-endpoint" property
-name followed by a reference in the same package. Such references consist of
-the remote device reference, the first package entry of the port data extension
-reference under the device and finally the first package entry of the endpoint
-data extension reference under the port. Individual references thus appear as::
+name followed by a string reference in the same package. [data-node-ref]::
 
-    Package() { device, "port@X", "endpoint@Y" }
+    "device.datanode"
 
 In the above example, "X" is the number of the port and "Y" is the number of
 the endpoint.
@@ -109,7 +106,7 @@ A simple example of this is show below::
 		ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
 		Package () {
 		    Package () { "reg", 0 },
-		    Package () { "remote-endpoint", Package() { \_SB.PCI0.ISP, "port@4", "endpoint@0" } },
+		    Package () { "remote-endpoint", "\\_SB.PCI0.ISP.EP40" },
 		}
 	    })
 	}
@@ -141,7 +138,7 @@ A simple example of this is show below::
 		ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
 		Package () {
 		    Package () { "reg", 0 },
-		    Package () { "remote-endpoint", Package () { \_SB.PCI0.I2C2.CAM0, "port@0", "endpoint@0" } },
+		    Package () { "remote-endpoint", "\\_SB.PCI0.I2C2.CAM0.EP00" },
 		}
 	    })
 	}
diff --git linux-libre-6.12-gnu/Documentation/firmware-guide/acpi/dsd/leds.rst linux-libre-6.12.79-gnu/Documentation/firmware-guide/acpi/dsd/leds.rst
index 93db592c93c7..a97cd07d49be 100644
--- linux-libre-6.12-gnu/Documentation/firmware-guide/acpi/dsd/leds.rst
+++ linux-libre-6.12.79-gnu/Documentation/firmware-guide/acpi/dsd/leds.rst
@@ -15,11 +15,6 @@ Referring to LEDs in Device tree is documented in [video-interfaces], in
 "flash-leds" property documentation. In short, LEDs are directly referred to by
 using phandles.
 
-While Device tree allows referring to any node in the tree [devicetree], in
-ACPI references are limited to device nodes only [acpi]. For this reason using
-the same mechanism on ACPI is not possible. A mechanism to refer to non-device
-ACPI nodes is documented in [data-node-ref].
-
 ACPI allows (as does DT) using integer arguments after the reference. A
 combination of the LED driver device reference and an integer argument,
 referring to the "reg" property of the relevant LED, is used to identify
@@ -74,7 +69,7 @@ omitted. ::
 			Package () {
 				Package () {
 					"flash-leds",
-					Package () { ^LED, "led@0", ^LED, "led@1" },
+					Package () { "^LED.LED0", "^LED.LED1" },
 				}
 			}
 		})
diff --git linux-libre-6.12-gnu/Documentation/firmware-guide/acpi/i2c-muxes.rst linux-libre-6.12.79-gnu/Documentation/firmware-guide/acpi/i2c-muxes.rst
index 3a8997ccd7c4..f366539acd79 100644
--- linux-libre-6.12-gnu/Documentation/firmware-guide/acpi/i2c-muxes.rst
+++ linux-libre-6.12.79-gnu/Documentation/firmware-guide/acpi/i2c-muxes.rst
@@ -14,7 +14,7 @@ Consider this topology::
     |      |   | 0x70 |--CH01--> i2c client B (0x50)
     +------+   +------+
 
-which corresponds to the following ASL::
+which corresponds to the following ASL (in the scope of \_SB)::
 
     Device (SMB1)
     {
@@ -24,7 +24,7 @@ which corresponds to the following ASL::
             Name (_HID, ...)
             Name (_CRS, ResourceTemplate () {
                 I2cSerialBus (0x70, ControllerInitiated, I2C_SPEED,
-                            AddressingMode7Bit, "^SMB1", 0x00,
+                            AddressingMode7Bit, "\\_SB.SMB1", 0x00,
                             ResourceConsumer,,)
             }
 
@@ -37,7 +37,7 @@ which corresponds to the following ASL::
                     Name (_HID, ...)
                     Name (_CRS, ResourceTemplate () {
                         I2cSerialBus (0x50, ControllerInitiated, I2C_SPEED,
-                                    AddressingMode7Bit, "^CH00", 0x00,
+                                    AddressingMode7Bit, "\\_SB.SMB1.CH00", 0x00,
                                     ResourceConsumer,,)
                     }
                 }
@@ -52,7 +52,7 @@ which corresponds to the following ASL::
                     Name (_HID, ...)
                     Name (_CRS, ResourceTemplate () {
                         I2cSerialBus (0x50, ControllerInitiated, I2C_SPEED,
-                                    AddressingMode7Bit, "^CH01", 0x00,
+                                    AddressingMode7Bit, "\\_SB.SMB1.CH01", 0x00,
                                     ResourceConsumer,,)
                     }
                 }
diff --git linux-libre-6.12-gnu/Documentation/gpu/drm-kms-helpers.rst linux-libre-6.12.79-gnu/Documentation/gpu/drm-kms-helpers.rst
index c3e58856f75b..96c03b9a644e 100644
--- linux-libre-6.12-gnu/Documentation/gpu/drm-kms-helpers.rst
+++ linux-libre-6.12.79-gnu/Documentation/gpu/drm-kms-helpers.rst
@@ -230,6 +230,9 @@ Panel Helper Reference
 .. kernel-doc:: drivers/gpu/drm/drm_panel_orientation_quirks.c
    :export:
 
+.. kernel-doc:: drivers/gpu/drm/drm_panel_backlight_quirks.c
+   :export:
+
 Panel Self Refresh Helper Reference
 ===================================
 
diff --git linux-libre-6.12-gnu/Documentation/gpu/xe/index.rst linux-libre-6.12.79-gnu/Documentation/gpu/xe/index.rst
index 3f07aa3b5432..89bbdcccf8eb 100644
--- linux-libre-6.12-gnu/Documentation/gpu/xe/index.rst
+++ linux-libre-6.12.79-gnu/Documentation/gpu/xe/index.rst
@@ -16,6 +16,7 @@ DG2, etc is provided to prototype the driver.
    xe_migrate
    xe_cs
    xe_pm
+   xe_gt_freq
    xe_pcode
    xe_gt_mcr
    xe_wa
diff --git linux-libre-6.12-gnu/Documentation/gpu/xe/xe_gt_freq.rst linux-libre-6.12.79-gnu/Documentation/gpu/xe/xe_gt_freq.rst
new file mode 100644
index 000000000000..c0811200e327
--- /dev/null
+++ linux-libre-6.12.79-gnu/Documentation/gpu/xe/xe_gt_freq.rst
@@ -0,0 +1,14 @@
+.. SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+==========================
+Xe GT Frequency Management
+==========================
+
+.. kernel-doc:: drivers/gpu/drm/xe/xe_gt_freq.c
+   :doc: Xe GT Frequency Management
+
+Internal API
+============
+
+.. kernel-doc:: drivers/gpu/drm/xe/xe_gt_freq.c
+   :internal:
diff --git linux-libre-6.12-gnu/Documentation/hwmon/aht10.rst linux-libre-6.12.79-gnu/Documentation/hwmon/aht10.rst
index 213644b4ecba..7903b6434326 100644
--- linux-libre-6.12-gnu/Documentation/hwmon/aht10.rst
+++ linux-libre-6.12.79-gnu/Documentation/hwmon/aht10.rst
@@ -20,6 +20,14 @@ Supported chips:
 
       English: http://www.aosong.com/userfiles/files/media/Data%20Sheet%20AHT20.pdf
 
+  * Aosong DHT20
+
+    Prefix: 'dht20'
+
+    Addresses scanned: None
+
+    Datasheet: https://www.digikey.co.nz/en/htmldatasheets/production/9184855/0/0/1/101020932
+
 Author: Johannes Cornelis Draaijer <jcdra1@gmail.com>
 
 
@@ -33,7 +41,7 @@ The address of this i2c device may only be 0x38
 Special Features
 ----------------
 
-AHT20 has additional CRC8 support which is sent as the last byte of the sensor
+AHT20, DHT20 has additional CRC8 support which is sent as the last byte of the sensor
 values.
 
 Usage Notes
diff --git linux-libre-6.12-gnu/Documentation/hwmon/dell-smm-hwmon.rst linux-libre-6.12.79-gnu/Documentation/hwmon/dell-smm-hwmon.rst
index 74905675d71f..5a4edb6565cf 100644
--- linux-libre-6.12-gnu/Documentation/hwmon/dell-smm-hwmon.rst
+++ linux-libre-6.12.79-gnu/Documentation/hwmon/dell-smm-hwmon.rst
@@ -32,12 +32,12 @@ Temperature sensors and fans can be queried and set via the standard
 =============================== ======= =======================================
 Name				Perm	Description
 =============================== ======= =======================================
-fan[1-3]_input                  RO      Fan speed in RPM.
-fan[1-3]_label                  RO      Fan label.
-fan[1-3]_min                    RO      Minimal Fan speed in RPM
-fan[1-3]_max                    RO      Maximal Fan speed in RPM
-fan[1-3]_target                 RO      Expected Fan speed in RPM
-pwm[1-3]                        RW      Control the fan PWM duty-cycle.
+fan[1-4]_input                  RO      Fan speed in RPM.
+fan[1-4]_label                  RO      Fan label.
+fan[1-4]_min                    RO      Minimal Fan speed in RPM
+fan[1-4]_max                    RO      Maximal Fan speed in RPM
+fan[1-4]_target                 RO      Expected Fan speed in RPM
+pwm[1-4]                        RW      Control the fan PWM duty-cycle.
 pwm1_enable                     WO      Enable or disable automatic BIOS fan
                                         control (not supported on all laptops,
                                         see below for details).
@@ -93,7 +93,7 @@ Again, when you find new codes, we'd be happy to have your patches!
 ---------------------------
 
 The driver also exports the fans as thermal cooling devices with
-``type`` set to ``dell-smm-fan[1-3]``. This allows for easy fan control
+``type`` set to ``dell-smm-fan[1-4]``. This allows for easy fan control
 using one of the thermal governors.
 
 Module parameters
diff --git linux-libre-6.12-gnu/Documentation/hwmon/g762.rst linux-libre-6.12.79-gnu/Documentation/hwmon/g762.rst
index 0371b3365c48..f224552a2d3c 100644
--- linux-libre-6.12-gnu/Documentation/hwmon/g762.rst
+++ linux-libre-6.12.79-gnu/Documentation/hwmon/g762.rst
@@ -17,7 +17,7 @@ done via a userland daemon like fancontrol.
 Note that those entries do not provide ways to setup the specific
 hardware characteristics of the system (reference clock, pulses per
 fan revolution, ...); Those can be modified via devicetree bindings
-documented in Documentation/devicetree/bindings/hwmon/g762.txt or
+documented in Documentation/devicetree/bindings/hwmon/gmt,g762.yaml or
 using a specific platform_data structure in board initialization
 file (see include/linux/platform_data/g762.h).
 
diff --git linux-libre-6.12-gnu/Documentation/hwmon/mpq8785.rst linux-libre-6.12.79-gnu/Documentation/hwmon/mpq8785.rst
index bf8176b87086..b91fefb1a84c 100644
--- linux-libre-6.12-gnu/Documentation/hwmon/mpq8785.rst
+++ linux-libre-6.12.79-gnu/Documentation/hwmon/mpq8785.rst
@@ -5,6 +5,7 @@ Kernel driver mpq8785
 
 Supported chips:
 
+  * MPS MPM82504
   * MPS MPQ8785
 
     Prefix: 'mpq8785'
@@ -14,6 +15,14 @@ Author: Charles Hsu <ythsu0511@gmail.com>
 Description
 -----------
 
+The MPM82504 is a quad 25A, scalable, fully integrated power module with a PMBus
+interface. The device offers a complete power solution that achieves up to 25A
+per output channel. The MPM82504 has four output channels that can be paralleled
+to provide 50A, 75A, or 100A of output current for flexible configurations.
+The device can also operate in parallel with the MPM3695-100 and additional
+MPM82504 devices to provide a higher output current. The MPM82504 operates
+at high efficiency across a wide load range.
+
 The MPQ8785 is a fully integrated, PMBus-compatible, high-frequency, synchronous
 buck converter. The MPQ8785 offers a very compact solution that achieves up to
 40A output current per phase, with excellent load and line regulation over a
@@ -23,18 +32,19 @@ output current load range.
 The PMBus interface provides converter configurations and key parameters
 monitoring.
 
-The MPQ8785 adopts MPS's proprietary multi-phase digital constant-on-time (MCOT)
+The devices adopts MPS's proprietary multi-phase digital constant-on-time (MCOT)
 control, which provides fast transient response and eases loop stabilization.
-The MCOT scheme also allows multiple MPQ8785 devices to be connected in parallel
-with excellent current sharing and phase interleaving for high-current
+The MCOT scheme also allows multiple devices or channels to be connected in
+parallel with excellent current sharing and phase interleaving for high-current
 applications.
 
 Fully integrated protection features include over-current protection (OCP),
 over-voltage protection (OVP), under-voltage protection (UVP), and
 over-temperature protection (OTP).
 
-The MPQ8785 requires a minimal number of readily available, standard external
-components, and is available in a TLGA (5mmx6mm) package.
+All supported modules require a minimal number of readily available, standard
+external components. The MPM82504 is available in a BGA (15mmx30mmx5.18mm)
+package and the MPQ8785 is available in a TLGA (5mmx6mm) package.
 
 Device compliant with:
 
diff --git linux-libre-6.12-gnu/Documentation/i2c/busses/i2c-i801.rst linux-libre-6.12.79-gnu/Documentation/i2c/busses/i2c-i801.rst
index c840b597912c..47e8ac5b7099 100644
--- linux-libre-6.12-gnu/Documentation/i2c/busses/i2c-i801.rst
+++ linux-libre-6.12.79-gnu/Documentation/i2c/busses/i2c-i801.rst
@@ -49,6 +49,7 @@ Supported adapters:
   * Intel Meteor Lake (SOC and PCH)
   * Intel Birch Stream (SOC)
   * Intel Arrow Lake (SOC)
+  * Intel Panther Lake (SOC)
 
    Datasheets: Publicly available at the Intel website
 
diff --git linux-libre-6.12-gnu/Documentation/kbuild/makefiles.rst linux-libre-6.12.79-gnu/Documentation/kbuild/makefiles.rst
index 7964e0c245ae..81607ce40759 100644
--- linux-libre-6.12-gnu/Documentation/kbuild/makefiles.rst
+++ linux-libre-6.12.79-gnu/Documentation/kbuild/makefiles.rst
@@ -656,6 +656,20 @@ cc-cross-prefix
             endif
     endif
 
+$(RUSTC) support functions
+--------------------------
+
+rustc-min-version
+  rustc-min-version tests if the value of $(CONFIG_RUSTC_VERSION) is greater
+  than or equal to the provided value and evaluates to y if so.
+
+  Example::
+
+    rustflags-$(call rustc-min-version, 108500) := -Cfoo
+
+  In this example, rustflags-y will be assigned the value -Cfoo if
+  $(CONFIG_RUSTC_VERSION) is >= 1.85.0.
+
 $(LD) support functions
 -----------------------
 
diff --git linux-libre-6.12-gnu/Documentation/locking/seqlock.rst linux-libre-6.12.79-gnu/Documentation/locking/seqlock.rst
index bfda1a5fecad..ec6411d02ac8 100644
--- linux-libre-6.12-gnu/Documentation/locking/seqlock.rst
+++ linux-libre-6.12.79-gnu/Documentation/locking/seqlock.rst
@@ -153,7 +153,7 @@ Use seqcount_latch_t when the write side sections cannot be protected
 from interruption by readers. This is typically the case when the read
 side can be invoked from NMI handlers.
 
-Check `raw_write_seqcount_latch()` for more information.
+Check `write_seqcount_latch()` for more information.
 
 
 .. _seqlock_t:
diff --git linux-libre-6.12-gnu/Documentation/netlink/specs/dpll.yaml linux-libre-6.12.79-gnu/Documentation/netlink/specs/dpll.yaml
index f2894ca35de8..860350e61edb 100644
--- linux-libre-6.12-gnu/Documentation/netlink/specs/dpll.yaml
+++ linux-libre-6.12.79-gnu/Documentation/netlink/specs/dpll.yaml
@@ -517,6 +517,8 @@ operations:
         reply: &pin-attrs
           attributes:
             - id
+            - module-name
+            - clock-id
             - board-label
             - panel-label
             - package-label
diff --git linux-libre-6.12-gnu/Documentation/netlink/specs/ethtool.yaml linux-libre-6.12.79-gnu/Documentation/netlink/specs/ethtool.yaml
index 6a050d755b9c..4936aa5855b1 100644
--- linux-libre-6.12-gnu/Documentation/netlink/specs/ethtool.yaml
+++ linux-libre-6.12.79-gnu/Documentation/netlink/specs/ethtool.yaml
@@ -96,7 +96,12 @@ attribute-sets:
         name: bits
         type: nest
         nested-attributes: bitset-bits
-
+      -
+        name: value
+        type: binary
+      -
+        name: mask
+        type: binary
   -
     name: string
     attributes:
@@ -1677,9 +1682,6 @@ operations:
 
       do: &module-eeprom-get-op
         request:
-          attributes:
-            - header
-        reply:
           attributes:
             - header
             - offset
@@ -1687,6 +1689,9 @@ operations:
             - page
             - bank
             - i2c-address
+        reply:
+          attributes:
+            - header
             - data
       dump: *module-eeprom-get-op
     -
diff --git linux-libre-6.12-gnu/Documentation/netlink/specs/fou.yaml linux-libre-6.12.79-gnu/Documentation/netlink/specs/fou.yaml
index 0af5ab842c04..91721ee40641 100644
--- linux-libre-6.12-gnu/Documentation/netlink/specs/fou.yaml
+++ linux-libre-6.12.79-gnu/Documentation/netlink/specs/fou.yaml
@@ -39,6 +39,8 @@ attribute-sets:
       -
         name: ipproto
         type: u8
+        checks:
+          min: 1
       -
         name: type
         type: u8
diff --git linux-libre-6.12-gnu/Documentation/netlink/specs/mptcp_pm.yaml linux-libre-6.12.79-gnu/Documentation/netlink/specs/mptcp_pm.yaml
index dc190bf838fe..a670a9bbe01b 100644
--- linux-libre-6.12-gnu/Documentation/netlink/specs/mptcp_pm.yaml
+++ linux-libre-6.12.79-gnu/Documentation/netlink/specs/mptcp_pm.yaml
@@ -22,65 +22,67 @@ definitions:
       doc: unused event
      -
       name: created
-      doc:
-        token, family, saddr4 | saddr6, daddr4 | daddr6, sport, dport
+      doc: >-
         A new MPTCP connection has been created. It is the good time to
         allocate memory and send ADD_ADDR if needed. Depending on the
         traffic-patterns it can take a long time until the
         MPTCP_EVENT_ESTABLISHED is sent.
+        Attributes: token, family, saddr4 | saddr6, daddr4 | daddr6, sport,
+        dport, server-side, [flags].
      -
       name: established
-      doc:
-        token, family, saddr4 | saddr6, daddr4 | daddr6, sport, dport
+      doc: >-
         A MPTCP connection is established (can start new subflows).
+        Attributes: token, family, saddr4 | saddr6, daddr4 | daddr6, sport,
+        dport, server-side, [flags].
      -
       name: closed
-      doc:
-        token
+      doc: >-
         A MPTCP connection has stopped.
+        Attribute: token.
      -
       name: announced
       value: 6
-      doc:
-        token, rem_id, family, daddr4 | daddr6 [, dport]
+      doc: >-
         A new address has been announced by the peer.
+        Attributes: token, rem_id, family, daddr4 | daddr6 [, dport].
      -
       name: removed
-      doc:
-        token, rem_id
+      doc: >-
         An address has been lost by the peer.
+        Attributes: token, rem_id.
      -
       name: sub-established
       value: 10
-      doc:
-        token, family, loc_id, rem_id, saddr4 | saddr6, daddr4 | daddr6, sport,
-        dport, backup, if_idx [, error]
+      doc: >-
         A new subflow has been established. 'error' should not be set.
+        Attributes: token, family, loc_id, rem_id, saddr4 | saddr6, daddr4 |
+        daddr6, sport, dport, backup, if-idx [, error].
      -
       name: sub-closed
-      doc:
-        token, family, loc_id, rem_id, saddr4 | saddr6, daddr4 | daddr6, sport,
-        dport, backup, if_idx [, error]
+      doc: >-
         A subflow has been closed. An error (copy of sk_err) could be set if an
         error has been detected for this subflow.
+        Attributes: token, family, loc_id, rem_id, saddr4 | saddr6, daddr4 |
+        daddr6, sport, dport, backup, if-idx [, error].
      -
       name: sub-priority
       value: 13
-      doc:
-        token, family, loc_id, rem_id, saddr4 | saddr6, daddr4 | daddr6, sport,
-        dport, backup, if_idx [, error]
+      doc: >-
         The priority of a subflow has changed. 'error' should not be set.
+        Attributes: token, family, loc_id, rem_id, saddr4 | saddr6, daddr4 |
+        daddr6, sport, dport, backup, if-idx [, error].
      -
       name: listener-created
       value: 15
-      doc:
-        family, sport, saddr4 | saddr6
+      doc: >-
         A new PM listener is created.
+        Attributes: family, sport, saddr4 | saddr6.
      -
       name: listener-closed
-      doc:
-        family, sport, saddr4 | saddr6
+      doc: >-
         A PM listener is closed.
+        Attributes: family, sport, saddr4 | saddr6.
 
 attribute-sets:
   -
@@ -253,8 +255,8 @@ attribute-sets:
         name: timeout
         type: u32
       -
-        name: if_idx
-        type: u32
+        name: if-idx
+        type: s32
       -
         name: reset-reason
         type: u32
diff --git linux-libre-6.12-gnu/Documentation/netlink/specs/ovs_vport.yaml linux-libre-6.12.79-gnu/Documentation/netlink/specs/ovs_vport.yaml
index 86ba9ac2a521..b538bb99ee9b 100644
--- linux-libre-6.12-gnu/Documentation/netlink/specs/ovs_vport.yaml
+++ linux-libre-6.12.79-gnu/Documentation/netlink/specs/ovs_vport.yaml
@@ -123,12 +123,12 @@ attribute-sets:
 
 operations:
   name-prefix: ovs-vport-cmd-
+  fixed-header: ovs-header
   list:
     -
       name: new
       doc: Create a new OVS vport
       attribute-set: vport
-      fixed-header: ovs-header
       do:
         request:
           attributes:
@@ -141,7 +141,6 @@ operations:
       name: del
       doc: Delete existing OVS vport from a data path
       attribute-set: vport
-      fixed-header: ovs-header
       do:
         request:
           attributes:
@@ -152,7 +151,6 @@ operations:
       name: get
       doc: Get / dump OVS vport configuration and state
       attribute-set: vport
-      fixed-header: ovs-header
       do: &vport-get-op
         request:
           attributes:
diff --git linux-libre-6.12-gnu/Documentation/netlink/specs/rt_link.yaml linux-libre-6.12.79-gnu/Documentation/netlink/specs/rt_link.yaml
index 0c4d5d40cae9..a048fc30389d 100644
--- linux-libre-6.12-gnu/Documentation/netlink/specs/rt_link.yaml
+++ linux-libre-6.12.79-gnu/Documentation/netlink/specs/rt_link.yaml
@@ -1094,11 +1094,10 @@ attribute-sets:
       -
         name: prop-list
         type: nest
-        nested-attributes: link-attrs
+        nested-attributes: prop-list-link-attrs
       -
         name: alt-ifname
         type: string
-        multi-attr: true
       -
         name: perm-address
         type: binary
@@ -1137,6 +1136,13 @@ attribute-sets:
         name: dpll-pin
         type: nest
         nested-attributes: link-dpll-pin-attrs
+  -
+    name: prop-list-link-attrs
+    subset-of: link-attrs
+    attributes:
+      -
+        name: alt-ifname
+        multi-attr: true
   -
     name: af-spec-attrs
     attributes:
@@ -2071,9 +2077,10 @@ attribute-sets:
         type: u32
   -
     name: mctp-attrs
+    name-prefix: ifla-mctp-
     attributes:
       -
-        name: mctp-net
+        name: net
         type: u32
   -
     name: stats-attrs
@@ -2319,7 +2326,6 @@ operations:
             - min-mtu
             - max-mtu
             - prop-list
-            - alt-ifname
             - perm-address
             - proto-down-reason
             - parent-dev-name
diff --git linux-libre-6.12-gnu/Documentation/netlink/specs/tc.yaml linux-libre-6.12.79-gnu/Documentation/netlink/specs/tc.yaml
index b02d59a0349c..043f205bc1ae 100644
--- linux-libre-6.12-gnu/Documentation/netlink/specs/tc.yaml
+++ linux-libre-6.12.79-gnu/Documentation/netlink/specs/tc.yaml
@@ -227,7 +227,7 @@ definitions:
         type: u8
         doc: log(P_max / (qth-max - qth-min))
       -
-        name: Scell_log
+        name: Scell-log
         type: u8
         doc: cell size for idle damping
       -
@@ -248,7 +248,7 @@ definitions:
         name: DPs
         type: u32
       -
-        name: def_DP
+        name: def-DP
         type: u32
       -
         name: grio
@@ -2017,7 +2017,8 @@ attribute-sets:
     attributes:
       -
         name: act
-        type: nest
+        type: indexed-array
+        sub-type: nest
         nested-attributes: tc-act-attrs
       -
         name: police
@@ -2250,7 +2251,8 @@ attribute-sets:
     attributes:
       -
         name: act
-        type: nest
+        type: indexed-array
+        sub-type: nest
         nested-attributes: tc-act-attrs
       -
         name: police
@@ -2745,7 +2747,7 @@ attribute-sets:
         type: u16
         byte-order: big-endian
       -
-        name: key-l2-tpv3-sid
+        name: key-l2tpv3-sid
         type: u32
         byte-order: big-endian
       -
@@ -3504,7 +3506,7 @@ attribute-sets:
         name: rate64
         type: u64
       -
-        name: prate4
+        name: prate64
         type: u64
       -
         name: burst
diff --git linux-libre-6.12-gnu/Documentation/networking/can.rst linux-libre-6.12.79-gnu/Documentation/networking/can.rst
index 62519d38c58b..58cc609e8669 100644
--- linux-libre-6.12-gnu/Documentation/networking/can.rst
+++ linux-libre-6.12.79-gnu/Documentation/networking/can.rst
@@ -742,7 +742,7 @@ The broadcast manager sends responses to user space in the same form:
             struct timeval ival1, ival2;    /* count and subsequent interval */
             canid_t can_id;                 /* unique can_id for task */
             __u32 nframes;                  /* number of can_frames following */
-            struct can_frame frames[0];
+            struct can_frame frames[];
     };
 
 The aligned payload 'frames' uses the same basic CAN frame structure defined
diff --git linux-libre-6.12-gnu/Documentation/networking/ip-sysctl.rst linux-libre-6.12.79-gnu/Documentation/networking/ip-sysctl.rst
index eacf8983e230..dcbb6f6caf6d 100644
--- linux-libre-6.12-gnu/Documentation/networking/ip-sysctl.rst
+++ linux-libre-6.12.79-gnu/Documentation/networking/ip-sysctl.rst
@@ -2170,6 +2170,12 @@ nexthop_compat_mode - BOOLEAN
 	understands the new API, this sysctl can be disabled to achieve full
 	performance benefits of the new API by disabling the nexthop expansion
 	and extraneous notifications.
+
+	Note that as a backward-compatible mode, dumping of modern features
+	might be incomplete or wrong. For example, resilient groups will not be
+	shown as such, but rather as just a list of next hops. Also weights that
+	do not fit into 8 bits will show incorrectly.
+
 	Default: true (backward compat mode)
 
 fib_notify_on_flag_change - INTEGER
diff --git linux-libre-6.12-gnu/Documentation/networking/iso15765-2.rst linux-libre-6.12.79-gnu/Documentation/networking/iso15765-2.rst
index 0e9d96074178..37ebb2c417cb 100644
--- linux-libre-6.12-gnu/Documentation/networking/iso15765-2.rst
+++ linux-libre-6.12.79-gnu/Documentation/networking/iso15765-2.rst
@@ -369,8 +369,8 @@ to their default.
 
   addr.can_family = AF_CAN;
   addr.can_ifindex = if_nametoindex("can0");
-  addr.tp.tx_id = 0x18DA42F1 | CAN_EFF_FLAG;
-  addr.tp.rx_id = 0x18DAF142 | CAN_EFF_FLAG;
+  addr.can_addr.tp.tx_id = 0x18DA42F1 | CAN_EFF_FLAG;
+  addr.can_addr.tp.rx_id = 0x18DAF142 | CAN_EFF_FLAG;
 
   ret = bind(s, (struct sockaddr *)&addr, sizeof(addr));
   if (ret < 0)
diff --git linux-libre-6.12-gnu/Documentation/networking/mptcp-sysctl.rst linux-libre-6.12.79-gnu/Documentation/networking/mptcp-sysctl.rst
index 95598c21fc8e..09be0e68b9af 100644
--- linux-libre-6.12-gnu/Documentation/networking/mptcp-sysctl.rst
+++ linux-libre-6.12.79-gnu/Documentation/networking/mptcp-sysctl.rst
@@ -12,6 +12,8 @@ add_addr_timeout - INTEGER (seconds)
 	resent to an MPTCP peer that has not acknowledged a previous
 	ADD_ADDR message.
 
+	Do not retransmit if set to 0.
+
 	The default value matches TCP_RTO_MAX. This is a per-namespace
 	sysctl.
 
diff --git linux-libre-6.12-gnu/Documentation/networking/seg6-sysctl.rst linux-libre-6.12.79-gnu/Documentation/networking/seg6-sysctl.rst
index 07c20e470baf..1b6af4779be1 100644
--- linux-libre-6.12-gnu/Documentation/networking/seg6-sysctl.rst
+++ linux-libre-6.12.79-gnu/Documentation/networking/seg6-sysctl.rst
@@ -25,6 +25,9 @@ seg6_require_hmac - INTEGER
 
 	Default is 0.
 
+/proc/sys/net/ipv6/seg6_* variables:
+====================================
+
 seg6_flowlabel - INTEGER
 	Controls the behaviour of computing the flowlabel of outer
 	IPv6 header in case of SR T.encaps
diff --git linux-libre-6.12-gnu/Documentation/networking/strparser.rst linux-libre-6.12.79-gnu/Documentation/networking/strparser.rst
index 6cab1f74ae05..7f623d1db72a 100644
--- linux-libre-6.12-gnu/Documentation/networking/strparser.rst
+++ linux-libre-6.12.79-gnu/Documentation/networking/strparser.rst
@@ -112,7 +112,7 @@ Functions
 Callbacks
 =========
 
-There are six callbacks:
+There are seven callbacks:
 
     ::
 
@@ -182,6 +182,13 @@ There are six callbacks:
     the length of the message. skb->len - offset may be greater
     then full_len since strparser does not trim the skb.
 
+    ::
+
+	int (*read_sock)(struct strparser *strp, read_descriptor_t *desc,
+                     sk_read_actor_t recv_actor);
+
+    The read_sock callback is used by strparser instead of
+    sock->ops->read_sock, if provided.
     ::
 
 	int (*read_sock_done)(struct strparser *strp, int err);
diff --git linux-libre-6.12-gnu/Documentation/power/runtime_pm.rst linux-libre-6.12.79-gnu/Documentation/power/runtime_pm.rst
index 53d1996460ab..12f429359a82 100644
--- linux-libre-6.12-gnu/Documentation/power/runtime_pm.rst
+++ linux-libre-6.12.79-gnu/Documentation/power/runtime_pm.rst
@@ -347,7 +347,9 @@ drivers/base/power/runtime.c and include/linux/pm_runtime.h:
 
   `int pm_runtime_resume_and_get(struct device *dev);`
     - run pm_runtime_resume(dev) and if successful, increment the device's
-      usage counter; return the result of pm_runtime_resume
+      usage counter; returns 0 on success (whether or not the device's
+      runtime PM status was already 'active') or the error code from
+      pm_runtime_resume() on failure.
 
   `int pm_request_idle(struct device *dev);`
     - submit a request to execute the subsystem-level idle callback for the
diff --git linux-libre-6.12-gnu/Documentation/process/2.Process.rst linux-libre-6.12.79-gnu/Documentation/process/2.Process.rst
index ef3b116492df..f4fc0da8999d 100644
--- linux-libre-6.12-gnu/Documentation/process/2.Process.rst
+++ linux-libre-6.12.79-gnu/Documentation/process/2.Process.rst
@@ -104,8 +104,10 @@ kernels go out with a handful of known regressions though, hopefully, none
 of them are serious.
 
 Once a stable release is made, its ongoing maintenance is passed off to the
-"stable team," currently Greg Kroah-Hartman. The stable team will release
-occasional updates to the stable release using the 5.x.y numbering scheme.
+"stable team," currently consists of Greg Kroah-Hartman and Sasha Levin. The
+stable team will release occasional updates to the stable release using the
+5.x.y numbering scheme.
+
 To be considered for an update release, a patch must (1) fix a significant
 bug, and (2) already be merged into the mainline for the next development
 kernel. Kernels will typically receive stable updates for a little more
diff --git linux-libre-6.12-gnu/Documentation/rust/coding-guidelines.rst linux-libre-6.12.79-gnu/Documentation/rust/coding-guidelines.rst
index 329b070a1d47..a2e326b42410 100644
--- linux-libre-6.12-gnu/Documentation/rust/coding-guidelines.rst
+++ linux-libre-6.12.79-gnu/Documentation/rust/coding-guidelines.rst
@@ -227,3 +227,149 @@ The equivalent in Rust may look like (ignoring documentation):
 That is, the equivalent of ``GPIO_LINE_DIRECTION_IN`` would be referred to as
 ``gpio::LineDirection::In``. In particular, it should not be named
 ``gpio::gpio_line_direction::GPIO_LINE_DIRECTION_IN``.
+
+
+Lints
+-----
+
+In Rust, it is possible to ``allow`` particular warnings (diagnostics, lints)
+locally, making the compiler ignore instances of a given warning within a given
+function, module, block, etc.
+
+It is similar to ``#pragma GCC diagnostic push`` + ``ignored`` + ``pop`` in C
+[#]_:
+
+.. code-block:: c
+
+	#pragma GCC diagnostic push
+	#pragma GCC diagnostic ignored "-Wunused-function"
+	static void f(void) {}
+	#pragma GCC diagnostic pop
+
+.. [#] In this particular case, the kernel's ``__{always,maybe}_unused``
+       attributes (C23's ``[[maybe_unused]]``) may be used; however, the example
+       is meant to reflect the equivalent lint in Rust discussed afterwards.
+
+But way less verbose:
+
+.. code-block:: rust
+
+	#[allow(dead_code)]
+	fn f() {}
+
+By that virtue, it makes it possible to comfortably enable more diagnostics by
+default (i.e. outside ``W=`` levels). In particular, those that may have some
+false positives but that are otherwise quite useful to keep enabled to catch
+potential mistakes.
+
+On top of that, Rust provides the ``expect`` attribute which takes this further.
+It makes the compiler warn if the warning was not produced. For instance, the
+following will ensure that, when ``f()`` is called somewhere, we will have to
+remove the attribute:
+
+.. code-block:: rust
+
+	#[expect(dead_code)]
+	fn f() {}
+
+If we do not, we get a warning from the compiler::
+
+	warning: this lint expectation is unfulfilled
+	 --> x.rs:3:10
+	  |
+	3 | #[expect(dead_code)]
+	  |          ^^^^^^^^^
+	  |
+	  = note: `#[warn(unfulfilled_lint_expectations)]` on by default
+
+This means that ``expect``\ s do not get forgotten when they are not needed, which
+may happen in several situations, e.g.:
+
+- Temporary attributes added while developing.
+
+- Improvements in lints in the compiler, Clippy or custom tools which may
+  remove a false positive.
+
+- When the lint is not needed anymore because it was expected that it would be
+  removed at some point, such as the ``dead_code`` example above.
+
+It also increases the visibility of the remaining ``allow``\ s and reduces the
+chance of misapplying one.
+
+Thus prefer ``expect`` over ``allow`` unless:
+
+- Conditional compilation triggers the warning in some cases but not others.
+
+  If there are only a few cases where the warning triggers (or does not
+  trigger) compared to the total number of cases, then one may consider using
+  a conditional ``expect`` (i.e. ``cfg_attr(..., expect(...))``). Otherwise,
+  it is likely simpler to just use ``allow``.
+
+- Inside macros, when the different invocations may create expanded code that
+  triggers the warning in some cases but not in others.
+
+- When code may trigger a warning for some architectures but not others, such
+  as an ``as`` cast to a C FFI type.
+
+As a more developed example, consider for instance this program:
+
+.. code-block:: rust
+
+	fn g() {}
+
+	fn main() {
+	    #[cfg(CONFIG_X)]
+	    g();
+	}
+
+Here, function ``g()`` is dead code if ``CONFIG_X`` is not set. Can we use
+``expect`` here?
+
+.. code-block:: rust
+
+	#[expect(dead_code)]
+	fn g() {}
+
+	fn main() {
+	    #[cfg(CONFIG_X)]
+	    g();
+	}
+
+This would emit a lint if ``CONFIG_X`` is set, since it is not dead code in that
+configuration. Therefore, in cases like this, we cannot use ``expect`` as-is.
+
+A simple possibility is using ``allow``:
+
+.. code-block:: rust
+
+	#[allow(dead_code)]
+	fn g() {}
+
+	fn main() {
+	    #[cfg(CONFIG_X)]
+	    g();
+	}
+
+An alternative would be using a conditional ``expect``:
+
+.. code-block:: rust
+
+	#[cfg_attr(not(CONFIG_X), expect(dead_code))]
+	fn g() {}
+
+	fn main() {
+	    #[cfg(CONFIG_X)]
+	    g();
+	}
+
+This would ensure that, if someone introduces another call to ``g()`` somewhere
+(e.g. unconditionally), then it would be spotted that it is not dead code
+anymore. However, the ``cfg_attr`` is more complex than a simple ``allow``.
+
+Therefore, it is likely that it is not worth using conditional ``expect``\ s when
+more than one or two configurations are involved or when the lint may be
+triggered due to non-local changes (such as ``dead_code``).
+
+For more information about diagnostics in Rust, please see:
+
+	https://doc.rust-lang.org/stable/reference/attributes/diagnostics.html
diff --git linux-libre-6.12-gnu/Documentation/rust/quick-start.rst linux-libre-6.12.79-gnu/Documentation/rust/quick-start.rst
index 2d107982c87b..ded0d0836aee 100644
--- linux-libre-6.12-gnu/Documentation/rust/quick-start.rst
+++ linux-libre-6.12.79-gnu/Documentation/rust/quick-start.rst
@@ -128,7 +128,7 @@ Rust standard library source
 ****************************
 
 The Rust standard library source is required because the build system will
-cross-compile ``core`` and ``alloc``.
+cross-compile ``core``.
 
 If ``rustup`` is being used, run::
 
diff --git linux-libre-6.12-gnu/Documentation/sphinx/kernel_abi.py linux-libre-6.12.79-gnu/Documentation/sphinx/kernel_abi.py
index 5911bd0d7965..51a92b371872 100644
--- linux-libre-6.12-gnu/Documentation/sphinx/kernel_abi.py
+++ linux-libre-6.12.79-gnu/Documentation/sphinx/kernel_abi.py
@@ -42,9 +42,11 @@ import kernellog
 from docutils import nodes, statemachine
 from docutils.statemachine import ViewList
 from docutils.parsers.rst import directives, Directive
-from docutils.utils.error_reporting import ErrorString
 from sphinx.util.docutils import switch_source_input
 
+def ErrorString(exc):  # Shamelessly stolen from docutils
+    return f'{exc.__class__.__name}: {exc}'
+
 __version__  = '1.0'
 
 def setup(app):
diff --git linux-libre-6.12-gnu/Documentation/sphinx/kernel_feat.py linux-libre-6.12.79-gnu/Documentation/sphinx/kernel_feat.py
index 03ace5f01b5c..2db63dd20399 100644
--- linux-libre-6.12-gnu/Documentation/sphinx/kernel_feat.py
+++ linux-libre-6.12.79-gnu/Documentation/sphinx/kernel_feat.py
@@ -40,9 +40,11 @@ import sys
 from docutils import nodes, statemachine
 from docutils.statemachine import ViewList
 from docutils.parsers.rst import directives, Directive
-from docutils.utils.error_reporting import ErrorString
 from sphinx.util.docutils import switch_source_input
 
+def ErrorString(exc):  # Shamelessly stolen from docutils
+    return f'{exc.__class__.__name}: {exc}'
+
 __version__  = '1.0'
 
 def setup(app):
diff --git linux-libre-6.12-gnu/Documentation/sphinx/kernel_include.py linux-libre-6.12.79-gnu/Documentation/sphinx/kernel_include.py
index 638762442336..ccbddcc4af79 100755
--- linux-libre-6.12-gnu/Documentation/sphinx/kernel_include.py
+++ linux-libre-6.12.79-gnu/Documentation/sphinx/kernel_include.py
@@ -34,13 +34,15 @@ u"""
 import os.path
 
 from docutils import io, nodes, statemachine
-from docutils.utils.error_reporting import SafeString, ErrorString
 from docutils.parsers.rst import directives
 from docutils.parsers.rst.directives.body import CodeBlock, NumberLines
 from docutils.parsers.rst.directives.misc import Include
 
 __version__  = '1.0'
 
+def ErrorString(exc):  # Shamelessly stolen from docutils
+    return f'{exc.__class__.__name}: {exc}'
+
 # ==============================================================================
 def setup(app):
 # ==============================================================================
@@ -111,7 +113,7 @@ class KernelInclude(Include):
             raise self.severe('Problems with "%s" directive path:\n'
                               'Cannot encode input file path "%s" '
                               '(wrong locale?).' %
-                              (self.name, SafeString(path)))
+                              (self.name, path))
         except IOError as error:
             raise self.severe('Problems with "%s" directive path:\n%s.' %
                       (self.name, ErrorString(error)))
diff --git linux-libre-6.12-gnu/Documentation/sphinx/maintainers_include.py linux-libre-6.12.79-gnu/Documentation/sphinx/maintainers_include.py
index dcad0fff4723..496489d634c4 100755
--- linux-libre-6.12-gnu/Documentation/sphinx/maintainers_include.py
+++ linux-libre-6.12.79-gnu/Documentation/sphinx/maintainers_include.py
@@ -22,10 +22,12 @@ import re
 import os.path
 
 from docutils import statemachine
-from docutils.utils.error_reporting import ErrorString
 from docutils.parsers.rst import Directive
 from docutils.parsers.rst.directives.misc import Include
 
+def ErrorString(exc):  # Shamelessly stolen from docutils
+    return f'{exc.__class__.__name}: {exc}'
+
 __version__  = '1.0'
 
 def setup(app):
diff --git linux-libre-6.12-gnu/Documentation/trace/events-pci.rst linux-libre-6.12.79-gnu/Documentation/trace/events-pci.rst
new file mode 100644
index 000000000000..03ff4ad30ddf
--- /dev/null
+++ linux-libre-6.12.79-gnu/Documentation/trace/events-pci.rst
@@ -0,0 +1,74 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===========================
+Subsystem Trace Points: PCI
+===========================
+
+Overview
+========
+The PCI tracing system provides tracepoints to monitor critical hardware events
+that can impact system performance and reliability. These events normally show
+up here:
+
+	/sys/kernel/tracing/events/pci
+
+Cf. include/trace/events/pci.h for the events definitions.
+
+Available Tracepoints
+=====================
+
+pci_hp_event
+------------
+
+Monitors PCI hotplug events including card insertion/removal and link
+state changes.
+::
+
+    pci_hp_event  "%s slot:%s, event:%s\n"
+
+**Event Types**:
+
+* ``LINK_UP`` - PCIe link established
+* ``LINK_DOWN`` - PCIe link lost
+* ``CARD_PRESENT`` - Card detected in slot
+* ``CARD_NOT_PRESENT`` - Card removed from slot
+
+**Example Usage**::
+
+    # Enable the tracepoint
+    echo 1 > /sys/kernel/debug/tracing/events/pci/pci_hp_event/enable
+
+    # Monitor events (the following output is generated when a device is hotplugged)
+    cat /sys/kernel/debug/tracing/trace_pipe
+       irq/51-pciehp-88      [001] .....  1311.177459: pci_hp_event: 0000:00:02.0 slot:10, event:CARD_PRESENT
+
+       irq/51-pciehp-88      [001] .....  1311.177566: pci_hp_event: 0000:00:02.0 slot:10, event:LINK_UP
+
+pcie_link_event
+---------------
+
+Monitors PCIe link speed changes and provides detailed link status information.
+::
+
+    pcie_link_event  "%s type:%d, reason:%d, cur_bus_speed:%d, max_bus_speed:%d, width:%u, flit_mode:%u, status:%s\n"
+
+**Parameters**:
+
+* ``type`` - PCIe device type (4=Root Port, etc.)
+* ``reason`` - Reason for link change:
+
+  - ``0`` - Link retrain
+  - ``1`` - Bus enumeration
+  - ``2`` - Bandwidth notification enable
+  - ``3`` - Bandwidth notification IRQ
+  - ``4`` - Hotplug event
+
+
+**Example Usage**::
+
+    # Enable the tracepoint
+    echo 1 > /sys/kernel/debug/tracing/events/pci/pcie_link_event/enable
+
+    # Monitor events (the following output is generated when a device is hotplugged)
+    cat /sys/kernel/debug/tracing/trace_pipe
+       irq/51-pciehp-88      [001] .....   381.545386: pcie_link_event: 0000:00:02.0 type:4, reason:4, cur_bus_speed:20, max_bus_speed:23, width:1, flit_mode:0, status:DLLLA
diff --git linux-libre-6.12-gnu/Documentation/trace/histogram-design.rst linux-libre-6.12.79-gnu/Documentation/trace/histogram-design.rst
index 5765eb3e9efa..a30f4bed11b4 100644
--- linux-libre-6.12-gnu/Documentation/trace/histogram-design.rst
+++ linux-libre-6.12.79-gnu/Documentation/trace/histogram-design.rst
@@ -380,7 +380,9 @@ entry, ts0, corresponding to the ts0 variable in the sched_waking
 trigger above.
 
 sched_waking histogram
-----------------------::
+----------------------
+
+.. code-block::
 
   +------------------+
   | hist_data        |<-------------------------------------------------------+
diff --git linux-libre-6.12-gnu/Documentation/trace/index.rst linux-libre-6.12.79-gnu/Documentation/trace/index.rst
index 0b300901fd75..e9bcb9d9f7f3 100644
--- linux-libre-6.12-gnu/Documentation/trace/index.rst
+++ linux-libre-6.12.79-gnu/Documentation/trace/index.rst
@@ -1,38 +1,104 @@
-==========================
-Linux Tracing Technologies
-==========================
+================================
+Linux Tracing Technologies Guide
+================================
+
+Tracing in the Linux kernel is a powerful mechanism that allows
+developers and system administrators to analyze and debug system
+behavior. This guide provides documentation on various tracing
+frameworks and tools available in the Linux kernel.
+
+Introduction to Tracing
+-----------------------
+
+This section provides an overview of Linux tracing mechanisms
+and debugging approaches.
 
 .. toctree::
    :maxdepth: 2
 
-   ftrace-design
+   debugging
+   tracepoints
    tracepoint-analysis
+   ring-buffer-map
+
+Core Tracing Frameworks
+-----------------------
+
+The following are the primary tracing frameworks integrated into
+the Linux kernel.
+
+.. toctree::
+   :maxdepth: 1
+
    ftrace
+   ftrace-design
    ftrace-uses
-   fprobe
    kprobes
    kprobetrace
-   uprobetracer
    fprobetrace
-   tracepoints
+   fprobe
+   ring-buffer-design
+
+Event Tracing and Analysis
+--------------------------
+
+A detailed explanation of event tracing mechanisms and their
+applications.
+
+.. toctree::
+   :maxdepth: 1
+
    events
    events-kmem
    events-power
    events-nmi
    events-msr
-   mmiotrace
+   events-pci
+   boottime-trace
    histogram
    histogram-design
-   boottime-trace
-   hwlat_detector
-   osnoise-tracer
-   timerlat-tracer
+
+Hardware and Performance Tracing
+--------------------------------
+
+This section covers tracing features that monitor hardware
+interactions and system performance.
+
+.. toctree::
+   :maxdepth: 1
+
    intel_th
-   ring-buffer-design
-   ring-buffer-map
    stm
    sys-t
    coresight/index
-   user_events
    rv/index
    hisi-ptt
+   mmiotrace
+   hwlat_detector
+   osnoise-tracer
+   timerlat-tracer
+
+User-Space Tracing
+------------------
+
+These tools allow tracing user-space applications and
+interactions.
+
+.. toctree::
+   :maxdepth: 1
+
+   user_events
+   uprobetracer
+
+Additional Resources
+--------------------
+
+For more details, refer to the respective documentation of each
+tracing tool and framework.
+
+.. only:: subproject and html
+
+   Indices
+   =======
+
+   * :ref:`genindex`
diff --git linux-libre-6.12-gnu/Documentation/translations/it_IT/core-api/symbol-namespaces.rst linux-libre-6.12.79-gnu/Documentation/translations/it_IT/core-api/symbol-namespaces.rst
index 17abc25ee4c1..6657f82c0101 100644
--- linux-libre-6.12-gnu/Documentation/translations/it_IT/core-api/symbol-namespaces.rst
+++ linux-libre-6.12.79-gnu/Documentation/translations/it_IT/core-api/symbol-namespaces.rst
@@ -69,7 +69,7 @@ Per esempio per esportare tutti i simboli definiti in usb-common nello spazio
 dei nomi USB_COMMON, si può aggiungere la seguente linea in
 drivers/usb/common/Makefile::
 
-	ccflags-y += -DDEFAULT_SYMBOL_NAMESPACE=USB_COMMON
+	ccflags-y += -DDEFAULT_SYMBOL_NAMESPACE='"USB_COMMON"'
 
 Questo cambierà tutte le macro EXPORT_SYMBOL() ed EXPORT_SYMBOL_GPL(). Invece,
 un simbolo esportato con EXPORT_SYMBOL_NS() non verrà cambiato e il simbolo
@@ -79,7 +79,7 @@ Una seconda possibilità è quella di definire il simbolo di preprocessore
 direttamente nei file da compilare. L'esempio precedente diventerebbe::
 
 	#undef  DEFAULT_SYMBOL_NAMESPACE
-	#define DEFAULT_SYMBOL_NAMESPACE USB_COMMON
+	#define DEFAULT_SYMBOL_NAMESPACE "USB_COMMON"
 
 Questo va messo prima di un qualsiasi uso di EXPORT_SYMBOL.
 
diff --git linux-libre-6.12-gnu/Documentation/translations/zh_CN/core-api/symbol-namespaces.rst linux-libre-6.12.79-gnu/Documentation/translations/zh_CN/core-api/symbol-namespaces.rst
index bb16f0611046..f3e73834f7d7 100644
--- linux-libre-6.12-gnu/Documentation/translations/zh_CN/core-api/symbol-namespaces.rst
+++ linux-libre-6.12.79-gnu/Documentation/translations/zh_CN/core-api/symbol-namespaces.rst
@@ -66,7 +66,7 @@
 子系统的 ``Makefile`` 中定义默认命名空间。例如，如果要将usb-common中定义的所有符号导
 出到USB_COMMON命名空间，可以在drivers/usb/common/Makefile中添加这样一行::
 
-       ccflags-y += -DDEFAULT_SYMBOL_NAMESPACE=USB_COMMON
+       ccflags-y += -DDEFAULT_SYMBOL_NAMESPACE='"USB_COMMON"'
 
 这将影响所有 EXPORT_SYMBOL() 和 EXPORT_SYMBOL_GPL() 语句。当这个定义存在时，
 用EXPORT_SYMBOL_NS()导出的符号仍然会被导出到作为命名空间参数传递的命名空间中，
@@ -76,7 +76,7 @@
 成::
 
        #undef  DEFAULT_SYMBOL_NAMESPACE
-       #define DEFAULT_SYMBOL_NAMESPACE USB_COMMON
+       #define DEFAULT_SYMBOL_NAMESPACE "USB_COMMON"
 
 应置于相关编译单元中任何 EXPORT_SYMBOL 宏之前
 
diff --git linux-libre-6.12-gnu/Documentation/translations/zh_CN/driver-api/gpio/index.rst linux-libre-6.12.79-gnu/Documentation/translations/zh_CN/driver-api/gpio/index.rst
index e4d54724a1b5..f64a69f771ca 100644
--- linux-libre-6.12-gnu/Documentation/translations/zh_CN/driver-api/gpio/index.rst
+++ linux-libre-6.12.79-gnu/Documentation/translations/zh_CN/driver-api/gpio/index.rst
@@ -42,7 +42,7 @@ ACPI支持
 
 该API在以下内核代码中:
 
-drivers/gpio/gpiolib-acpi.c
+drivers/gpio/gpiolib-acpi-core.c
 
 设备树支持
 ==========
diff --git linux-libre-6.12-gnu/Documentation/virt/kvm/api.rst linux-libre-6.12.79-gnu/Documentation/virt/kvm/api.rst
index edc070c6e19b..d196d128ce98 100644
--- linux-libre-6.12-gnu/Documentation/virt/kvm/api.rst
+++ linux-libre-6.12.79-gnu/Documentation/virt/kvm/api.rst
@@ -8107,6 +8107,58 @@ KVM_X86_QUIRK_SLOT_ZAP_ALL          By default, for KVM_X86_DEFAULT_VM VMs, KVM
                                     or moved memslot isn't reachable, i.e KVM
                                     _may_ invalidate only SPTEs related to the
                                     memslot.
+
+KVM_X86_QUIRK_STUFF_FEATURE_MSRS    By default, at vCPU creation, KVM sets the
+                                    vCPU's MSR_IA32_PERF_CAPABILITIES (0x345),
+                                    MSR_IA32_ARCH_CAPABILITIES (0x10a),
+                                    MSR_PLATFORM_INFO (0xce), and all VMX MSRs
+                                    (0x480..0x492) to the maximal capabilities
+                                    supported by KVM.  KVM also sets
+                                    MSR_IA32_UCODE_REV (0x8b) to an arbitrary
+                                    value (which is different for Intel vs.
+                                    AMD).  Lastly, when guest CPUID is set (by
+                                    userspace), KVM modifies select VMX MSR
+                                    fields to force consistency between guest
+                                    CPUID and L2's effective ISA.  When this
+                                    quirk is disabled, KVM zeroes the vCPU's MSR
+                                    values (with two exceptions, see below),
+                                    i.e. treats the feature MSRs like CPUID
+                                    leaves and gives userspace full control of
+                                    the vCPU model definition.  This quirk does
+                                    not affect VMX MSRs CR0/CR4_FIXED1 (0x487
+                                    and 0x489), as KVM does now allow them to
+                                    be set by userspace (KVM sets them based on
+                                    guest CPUID, for safety purposes).
+
+KVM_X86_QUIRK_IGNORE_GUEST_PAT      By default, on Intel platforms, KVM ignores
+                                    guest PAT and forces the effective memory
+                                    type to WB in EPT.  The quirk is not available
+                                    on Intel platforms which are incapable of
+                                    safely honoring guest PAT (i.e., without CPU
+                                    self-snoop, KVM always ignores guest PAT and
+                                    forces effective memory type to WB).  It is
+                                    also ignored on AMD platforms or, on Intel,
+                                    when a VM has non-coherent DMA devices
+                                    assigned; KVM always honors guest PAT in
+                                    such case. The quirk is needed to avoid
+                                    slowdowns on certain Intel Xeon platforms
+                                    (e.g. ICX, SPR) where self-snoop feature is
+                                    supported but UC is slow enough to cause
+                                    issues with some older guests that use
+                                    UC instead of WC to map the video RAM.
+                                    Userspace can disable the quirk to honor
+                                    guest PAT if it knows that there is no such
+                                    guest software, for example if it does not
+                                    expose a bochs graphics device (which is
+                                    known to have had a buggy driver).
+
+KVM_X86_QUIRK_VMCS12_ALLOW_FREEZE_IN_SMM   By default, KVM relaxes the consistency
+                                      check for GUEST_IA32_DEBUGCTL in vmcs12
+                                      to allow FREEZE_IN_SMM to be set.  When
+                                      this quirk is disabled, KVM requires this
+                                      bit to be cleared.  Note that the vmcs02
+                                      bit is still completely controlled by the
+                                      host, regardless of the quirk setting.
 =================================== ============================================
 
 7.32 KVM_CAP_MAX_VCPU_ID
diff --git linux-libre-6.12-gnu/Documentation/wmi/devices/msi-wmi-platform.rst linux-libre-6.12.79-gnu/Documentation/wmi/devices/msi-wmi-platform.rst
index 31a136942892..73197b31926a 100644
--- linux-libre-6.12-gnu/Documentation/wmi/devices/msi-wmi-platform.rst
+++ linux-libre-6.12.79-gnu/Documentation/wmi/devices/msi-wmi-platform.rst
@@ -138,6 +138,10 @@ input data, the meaning of which depends on the subfeature being accessed.
 The output buffer contains a single byte which signals success or failure (``0x00`` on failure)
 and 31 bytes of output data, the meaning if which depends on the subfeature being accessed.
 
+.. note::
+   The ACPI control method responsible for handling the WMI method calls is not thread-safe.
+   This is a firmware bug that needs to be handled inside the driver itself.
+
 WMI method Get_EC()
 -------------------
 
diff --git linux-libre-6.12-gnu/Documentation/wmi/driver-development-guide.rst linux-libre-6.12.79-gnu/Documentation/wmi/driver-development-guide.rst
index 429137b2f632..4c10159d5f6c 100644
--- linux-libre-6.12-gnu/Documentation/wmi/driver-development-guide.rst
+++ linux-libre-6.12.79-gnu/Documentation/wmi/driver-development-guide.rst
@@ -50,6 +50,7 @@ to matching WMI devices using a struct wmi_device_id table:
 ::
 
   static const struct wmi_device_id foo_id_table[] = {
+         /* Only use uppercase letters! */
          { "936DA01F-9ABD-4D9D-80C7-02AF85C822A8", NULL },
          { }
   };
diff --git linux-libre-6.12-gnu/MAINTAINERS linux-libre-6.12.79-gnu/MAINTAINERS
index b878ddc99f94..d765c62c80ea 100644
--- linux-libre-6.12-gnu/MAINTAINERS
+++ linux-libre-6.12.79-gnu/MAINTAINERS
@@ -701,7 +701,7 @@ M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/radio/radio-aimslab*
 
 AIO
@@ -809,7 +809,7 @@ ALLWINNER A10 CSI DRIVER
 M:	Maxime Ripard <mripard@kernel.org>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml
 F:	drivers/media/platform/sunxi/sun4i-csi/
 
@@ -818,7 +818,7 @@ M:	Yong Deng <yong.deng@magewell.com>
 M:	Paul Kocialkowski <paul.kocialkowski@bootlin.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/allwinner,sun6i-a31-csi.yaml
 F:	drivers/media/platform/sunxi/sun6i-csi/
 
@@ -826,7 +826,7 @@ ALLWINNER A31 ISP DRIVER
 M:	Paul Kocialkowski <paul.kocialkowski@bootlin.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/allwinner,sun6i-a31-isp.yaml
 F:	drivers/staging/media/sunxi/sun6i-isp/
 F:	drivers/staging/media/sunxi/sun6i-isp/uapi/sun6i-isp-config.h
@@ -835,7 +835,7 @@ ALLWINNER A31 MIPI CSI-2 BRIDGE DRIVER
 M:	Paul Kocialkowski <paul.kocialkowski@bootlin.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/allwinner,sun6i-a31-mipi-csi2.yaml
 F:	drivers/media/platform/sunxi/sun6i-mipi-csi2/
 
@@ -3348,7 +3348,7 @@ ASAHI KASEI AK7375 LENS VOICE COIL DRIVER
 M:	Tianshu Qiu <tian.shu.qiu@intel.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/asahi-kasei,ak7375.yaml
 F:	drivers/media/i2c/ak7375.c
 
@@ -3765,7 +3765,7 @@ M:	Mauro Carvalho Chehab <mchehab@kernel.org>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/usb/dvb-usb-v2/az6007.c
 
 AZTECH FM RADIO RECEIVER DRIVER
@@ -3773,7 +3773,7 @@ M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/radio/radio-aztech*
 
 B43 WIRELESS DRIVER
@@ -3857,7 +3857,7 @@ M:	Fabien Dessenne <fabien.dessenne@foss.st.com>
 L:	linux-media@vger.kernel.org
 S:	Supported
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/platform/st/sti/bdisp
 
 BECKHOFF CX5020 ETHERCAT MASTER DRIVER
@@ -4865,7 +4865,7 @@ M:	Mauro Carvalho Chehab <mchehab@kernel.org>
 L:	linux-media@vger.kernel.org
 S:	Odd fixes
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/driver-api/media/drivers/bttv*
 F:	drivers/media/pci/bt8xx/bttv*
 
@@ -4979,13 +4979,13 @@ M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/radio/radio-cadet*
 
 CAFE CMOS INTEGRATED CAMERA CONTROLLER DRIVER
 L:	linux-media@vger.kernel.org
 S:	Orphan
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/admin-guide/media/cafe_ccic*
 F:	drivers/media/platform/marvell/
 
@@ -5169,7 +5169,7 @@ M:	Hans Verkuil <hverkuil-cisco@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Supported
 W:	http://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/ABI/testing/debugfs-cec-error-inj
 F:	Documentation/devicetree/bindings/media/cec/cec-common.yaml
 F:	Documentation/driver-api/media/cec-core.rst
@@ -5186,7 +5186,7 @@ M:	Hans Verkuil <hverkuil-cisco@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Supported
 W:	http://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/cec/cec-gpio.yaml
 F:	drivers/media/cec/platform/cec-gpio/
 
@@ -5393,7 +5393,7 @@ CHRONTEL CH7322 CEC DRIVER
 M:	Joe Tessler <jrt@google.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.yaml
 F:	drivers/media/cec/i2c/ch7322.c
 
@@ -5582,7 +5582,7 @@ M:	Hans Verkuil <hverkuil-cisco@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Supported
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/pci/cobalt/
 
 COCCINELLE/Semantic Patches (SmPL)
@@ -6026,7 +6026,7 @@ M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Odd Fixes
 W:	http://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/i2c/cs3308.c
 
 CS5535 Audio ALSA driver
@@ -6057,7 +6057,7 @@ M:	Andy Walls <awalls@md.metrocast.net>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/pci/cx18/
 F:	include/uapi/linux/ivtv*
 
@@ -6066,7 +6066,7 @@ M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/common/cx2341x*
 F:	include/media/drv-intf/cx2341x.h
 
@@ -6084,7 +6084,7 @@ M:	Mauro Carvalho Chehab <mchehab@kernel.org>
 L:	linux-media@vger.kernel.org
 S:	Odd fixes
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/driver-api/media/drivers/cx88*
 F:	drivers/media/pci/cx88/
 
@@ -6320,7 +6320,7 @@ DEINTERLACE DRIVERS FOR ALLWINNER H3
 M:	Jernej Skrabec <jernej.skrabec@gmail.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/allwinner,sun8i-h3-deinterlace.yaml
 F:	drivers/media/platform/sunxi/sun8i-di/
 
@@ -6447,7 +6447,7 @@ M:	Hugues Fruchet <hugues.fruchet@foss.st.com>
 L:	linux-media@vger.kernel.org
 S:	Supported
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/platform/st/sti/delta
 
 DENALI NAND DRIVER
@@ -6855,7 +6855,7 @@ DONGWOON DW9714 LENS VOICE COIL DRIVER
 M:	Sakari Ailus <sakari.ailus@linux.intel.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/dongwoon,dw9714.yaml
 F:	drivers/media/i2c/dw9714.c
 
@@ -6863,13 +6863,13 @@ DONGWOON DW9719 LENS VOICE COIL DRIVER
 M:	Daniel Scally <djrscally@gmail.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/i2c/dw9719.c
 
 DONGWOON DW9768 LENS VOICE COIL DRIVER
 L:	linux-media@vger.kernel.org
 S:	Orphan
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/dongwoon,dw9768.yaml
 F:	drivers/media/i2c/dw9768.c
 
@@ -6877,7 +6877,7 @@ DONGWOON DW9807 LENS VOICE COIL DRIVER
 M:	Sakari Ailus <sakari.ailus@linux.intel.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/dongwoon,dw9807-vcm.yaml
 F:	drivers/media/i2c/dw9807-vcm.c
 
@@ -7860,7 +7860,7 @@ DSBR100 USB FM RADIO DRIVER
 M:	Alexey Klimov <klimov.linux@gmail.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/radio/dsbr100.c
 
 DT3155 MEDIA DRIVER
@@ -7868,7 +7868,7 @@ M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Odd Fixes
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/pci/dt3155/
 
 DVB_USB_AF9015 MEDIA DRIVER
@@ -7913,7 +7913,7 @@ S:	Maintained
 W:	https://linuxtv.org
 W:	http://github.com/mkrufky
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/usb/dvb-usb/cxusb*
 
 DVB_USB_EC168 MEDIA DRIVER
@@ -8282,7 +8282,7 @@ M:	Mauro Carvalho Chehab <mchehab@kernel.org>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/admin-guide/media/em28xx*
 F:	drivers/media/usb/em28xx/
 
@@ -8578,7 +8578,7 @@ EXTRON DA HD 4K PLUS CEC DRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/cec/usb/extron-da-hd-4k-plus/
 
 EXYNOS DP DRIVER
@@ -9400,7 +9400,7 @@ GALAXYCORE GC2145 SENSOR DRIVER
 M:	Alain Volmat <alain.volmat@foss.st.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/galaxycore,gc2145.yaml
 F:	drivers/media/i2c/gc2145.c
 
@@ -9448,7 +9448,7 @@ M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/radio/radio-gemtek*
 
 GENERIC ARCHITECTURE TOPOLOGY
@@ -9680,7 +9680,7 @@ L:	linux-acpi@vger.kernel.org
 S:	Supported
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-gpio-intel.git
 F:	Documentation/firmware-guide/acpi/gpio-properties.rst
-F:	drivers/gpio/gpiolib-acpi.c
+F:	drivers/gpio/gpiolib-acpi-*.c
 F:	drivers/gpio/gpiolib-acpi.h
 
 GPIO AGGREGATOR
@@ -9830,56 +9830,56 @@ GS1662 VIDEO SERIALIZER
 M:	Charles-Antoine Couret <charles-antoine.couret@nexvision.fr>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/spi/gs1662.c
 
 GSPCA FINEPIX SUBDRIVER
 M:	Frank Zago <frank@zago.net>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/usb/gspca/finepix.c
 
 GSPCA GL860 SUBDRIVER
 M:	Olivier Lorin <o.lorin@laposte.net>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/usb/gspca/gl860/
 
 GSPCA M5602 SUBDRIVER
 M:	Erik Andren <erik.andren@gmail.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/usb/gspca/m5602/
 
 GSPCA PAC207 SONIXB SUBDRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Odd Fixes
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/usb/gspca/pac207.c
 
 GSPCA SN9C20X SUBDRIVER
 M:	Brian Johnson <brijohn@gmail.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/usb/gspca/sn9c20x.c
 
 GSPCA T613 SUBDRIVER
 M:	Leandro Costantino <lcostantino@gmail.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/usb/gspca/t613.c
 
 GSPCA USB WEBCAM DRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Odd Fixes
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/usb/gspca/
 
 GTP (GPRS Tunneling Protocol)
@@ -9996,7 +9996,7 @@ M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Odd Fixes
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/usb/hdpvr/
 
 HEWLETT PACKARD ENTERPRISE ILO CHIF DRIVER
@@ -10503,7 +10503,7 @@ M:	Jean-Christophe Trotin <jean-christophe.trotin@foss.st.com>
 L:	linux-media@vger.kernel.org
 S:	Supported
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/platform/st/sti/hva
 
 HWPOISON MEMORY FAILURE HANDLING
@@ -10531,7 +10531,7 @@ HYNIX HI556 SENSOR DRIVER
 M:	Sakari Ailus <sakari.ailus@linux.intel.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/i2c/hi556.c
 
 HYNIX HI846 SENSOR DRIVER
@@ -11502,7 +11502,7 @@ M:	Dan Scally <djrscally@gmail.com>
 R:	Tianshu Qiu <tian.shu.qiu@intel.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/userspace-api/media/v4l/pixfmt-srggb10-ipu3.rst
 F:	drivers/media/pci/intel/ipu3/
 
@@ -11523,7 +11523,7 @@ M:	Bingbu Cao <bingbu.cao@intel.com>
 R:	Tianshu Qiu <tian.shu.qiu@intel.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/admin-guide/media/ipu6-isys.rst
 F:	drivers/media/pci/intel/ipu6/
 
@@ -12036,7 +12036,7 @@ M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/radio/radio-isa*
 
 ISAPNP
@@ -12138,7 +12138,7 @@ M:	Andy Walls <awalls@md.metrocast.net>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/admin-guide/media/ivtv*
 F:	drivers/media/pci/ivtv/
 F:	include/uapi/linux/ivtv*
@@ -12286,7 +12286,7 @@ M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/radio/radio-keene*
 
 KERNEL AUTOMOUNTER
@@ -13573,7 +13573,7 @@ MA901 MASTERKIT USB FM RADIO DRIVER
 M:	Alexey Klimov <klimov.linux@gmail.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/radio/radio-ma901.c
 
 MAC80211
@@ -13868,7 +13868,7 @@ MAX2175 SDR TUNER DRIVER
 M:	Ramesh Shanmugasundaram <rashanmu@gmail.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/max2175.txt
 F:	Documentation/userspace-api/media/drivers/max2175.rst
 F:	drivers/media/i2c/max2175*
@@ -14048,7 +14048,7 @@ M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/radio/radio-maxiradio*
 
 MAXLINEAR ETHERNET PHY DRIVER
@@ -14131,7 +14131,7 @@ M:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
 L:	linux-media@vger.kernel.org
 S:	Supported
 W:	https://www.linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/mc/
 F:	include/media/media-*.h
 F:	include/uapi/linux/media.h
@@ -14140,7 +14140,7 @@ MEDIA DRIVER FOR FREESCALE IMX PXP
 M:	Philipp Zabel <p.zabel@pengutronix.de>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/platform/nxp/imx-pxp.[ch]
 
 MEDIA DRIVERS FOR ASCOT2E
@@ -14149,7 +14149,7 @@ L:	linux-media@vger.kernel.org
 S:	Supported
 W:	https://linuxtv.org
 W:	http://netup.tv/
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/dvb-frontends/ascot2e*
 
 MEDIA DRIVERS FOR CXD2099AR CI CONTROLLERS
@@ -14157,7 +14157,7 @@ M:	Jasmin Jessich <jasmin@anw.at>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/dvb-frontends/cxd2099*
 
 MEDIA DRIVERS FOR CXD2841ER
@@ -14166,7 +14166,7 @@ L:	linux-media@vger.kernel.org
 S:	Supported
 W:	https://linuxtv.org
 W:	http://netup.tv/
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/dvb-frontends/cxd2841er*
 
 MEDIA DRIVERS FOR CXD2880
@@ -14174,7 +14174,7 @@ M:	Yasunari Takiguchi <Yasunari.Takiguchi@sony.com>
 L:	linux-media@vger.kernel.org
 S:	Supported
 W:	http://linuxtv.org/
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/dvb-frontends/cxd2880/*
 F:	drivers/media/spi/cxd2880*
 
@@ -14182,7 +14182,7 @@ MEDIA DRIVERS FOR DIGITAL DEVICES PCIE DEVICES
 L:	linux-media@vger.kernel.org
 S:	Orphan
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/pci/ddbridge/*
 
 MEDIA DRIVERS FOR FREESCALE IMX
@@ -14190,7 +14190,7 @@ M:	Steve Longerbeam <slongerbeam@gmail.com>
 M:	Philipp Zabel <p.zabel@pengutronix.de>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/admin-guide/media/imx.rst
 F:	Documentation/devicetree/bindings/media/imx.txt
 F:	drivers/staging/media/imx/
@@ -14204,7 +14204,7 @@ M:	Martin Kepplinger <martin.kepplinger@puri.sm>
 R:	Purism Kernel Team <kernel@puri.sm>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/admin-guide/media/imx7.rst
 F:	Documentation/devicetree/bindings/media/nxp,imx-mipi-csi2.yaml
 F:	Documentation/devicetree/bindings/media/nxp,imx7-csi.yaml
@@ -14219,7 +14219,7 @@ L:	linux-media@vger.kernel.org
 S:	Supported
 W:	https://linuxtv.org
 W:	http://netup.tv/
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/dvb-frontends/helene*
 
 MEDIA DRIVERS FOR HORUS3A
@@ -14228,7 +14228,7 @@ L:	linux-media@vger.kernel.org
 S:	Supported
 W:	https://linuxtv.org
 W:	http://netup.tv/
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/dvb-frontends/horus3a*
 
 MEDIA DRIVERS FOR LNBH25
@@ -14237,14 +14237,14 @@ L:	linux-media@vger.kernel.org
 S:	Supported
 W:	https://linuxtv.org
 W:	http://netup.tv/
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/dvb-frontends/lnbh25*
 
 MEDIA DRIVERS FOR MXL5XX TUNER DEMODULATORS
 L:	linux-media@vger.kernel.org
 S:	Orphan
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/dvb-frontends/mxl5xx*
 
 MEDIA DRIVERS FOR NETUP PCI UNIVERSAL DVB devices
@@ -14253,7 +14253,7 @@ L:	linux-media@vger.kernel.org
 S:	Supported
 W:	https://linuxtv.org
 W:	http://netup.tv/
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/pci/netup_unidvb/*
 
 MEDIA DRIVERS FOR NVIDIA TEGRA - VDE
@@ -14261,7 +14261,7 @@ M:	Dmitry Osipenko <digetx@gmail.com>
 L:	linux-media@vger.kernel.org
 L:	linux-tegra@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/nvidia,tegra-vde.yaml
 F:	drivers/media/platform/nvidia/tegra-vde/
 
@@ -14270,7 +14270,7 @@ M:	Jacopo Mondi <jacopo@jmondi.org>
 L:	linux-media@vger.kernel.org
 L:	linux-renesas-soc@vger.kernel.org
 S:	Supported
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/renesas,ceu.yaml
 F:	drivers/media/platform/renesas/renesas-ceu.c
 F:	include/media/drv-intf/renesas-ceu.h
@@ -14280,7 +14280,7 @@ M:	Fabrizio Castro <fabrizio.castro.jz@renesas.com>
 L:	linux-media@vger.kernel.org
 L:	linux-renesas-soc@vger.kernel.org
 S:	Supported
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/renesas,drif.yaml
 F:	drivers/media/platform/renesas/rcar_drif.c
 
@@ -14289,7 +14289,7 @@ M:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
 L:	linux-media@vger.kernel.org
 L:	linux-renesas-soc@vger.kernel.org
 S:	Supported
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/renesas,fcp.yaml
 F:	drivers/media/platform/renesas/rcar-fcp.c
 F:	include/media/rcar-fcp.h
@@ -14299,7 +14299,7 @@ M:	Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
 L:	linux-media@vger.kernel.org
 L:	linux-renesas-soc@vger.kernel.org
 S:	Supported
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/renesas,fdp1.yaml
 F:	drivers/media/platform/renesas/rcar_fdp1.c
 
@@ -14308,7 +14308,7 @@ M:	Niklas Söderlund <niklas.soderlund@ragnatech.se>
 L:	linux-media@vger.kernel.org
 L:	linux-renesas-soc@vger.kernel.org
 S:	Supported
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/renesas,csi2.yaml
 F:	Documentation/devicetree/bindings/media/renesas,isp.yaml
 F:	Documentation/devicetree/bindings/media/renesas,vin.yaml
@@ -14322,7 +14322,7 @@ M:	Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
 L:	linux-media@vger.kernel.org
 L:	linux-renesas-soc@vger.kernel.org
 S:	Supported
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/renesas,vsp1.yaml
 F:	drivers/media/platform/renesas/vsp1/
 
@@ -14330,14 +14330,14 @@ MEDIA DRIVERS FOR ST STV0910 DEMODULATOR ICs
 L:	linux-media@vger.kernel.org
 S:	Orphan
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/dvb-frontends/stv0910*
 
 MEDIA DRIVERS FOR ST STV6111 TUNER ICs
 L:	linux-media@vger.kernel.org
 S:	Orphan
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/dvb-frontends/stv6111*
 
 MEDIA DRIVERS FOR STM32 - DCMI / DCMIPP
@@ -14345,7 +14345,7 @@ M:	Hugues Fruchet <hugues.fruchet@foss.st.com>
 M:	Alain Volmat <alain.volmat@foss.st.com>
 L:	linux-media@vger.kernel.org
 S:	Supported
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml
 F:	Documentation/devicetree/bindings/media/st,stm32-dcmipp.yaml
 F:	drivers/media/platform/st/stm32/stm32-dcmi.c
@@ -14357,7 +14357,7 @@ L:	linux-media@vger.kernel.org
 S:	Maintained
 W:	https://linuxtv.org
 Q:	http://patchwork.kernel.org/project/linux-media/list/
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/admin-guide/media/
 F:	Documentation/devicetree/bindings/media/
 F:	Documentation/driver-api/media/
@@ -14933,7 +14933,7 @@ L:	linux-media@vger.kernel.org
 L:	linux-amlogic@lists.infradead.org
 S:	Supported
 W:	http://linux-meson.com/
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/cec/amlogic,meson-gx-ao-cec.yaml
 F:	drivers/media/cec/platform/meson/ao-cec-g12a.c
 F:	drivers/media/cec/platform/meson/ao-cec.c
@@ -14943,7 +14943,7 @@ M:	Neil Armstrong <neil.armstrong@linaro.org>
 L:	linux-media@vger.kernel.org
 L:	linux-amlogic@lists.infradead.org
 S:	Supported
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/amlogic,axg-ge2d.yaml
 F:	drivers/media/platform/amlogic/meson-ge2d/
 
@@ -14959,7 +14959,7 @@ M:	Neil Armstrong <neil.armstrong@linaro.org>
 L:	linux-media@vger.kernel.org
 L:	linux-amlogic@lists.infradead.org
 S:	Supported
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml
 F:	drivers/staging/media/meson/vdec/
 
@@ -15557,7 +15557,7 @@ M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Odd Fixes
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/radio/radio-miropcm20*
 
 MITSUMI MM8013 FG DRIVER
@@ -15709,7 +15709,7 @@ MR800 AVERMEDIA USB FM RADIO DRIVER
 M:	Alexey Klimov <klimov.linux@gmail.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/radio/radio-mr800.c
 
 MRF24J40 IEEE 802.15.4 RADIO DRIVER
@@ -15776,7 +15776,7 @@ MT9M114 ONSEMI SENSOR DRIVER
 M:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/onnn,mt9m114.yaml
 F:	drivers/media/i2c/mt9m114.c
 
@@ -15784,7 +15784,7 @@ MT9P031 APTINA CAMERA SENSOR
 M:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/aptina,mt9p031.yaml
 F:	drivers/media/i2c/mt9p031.c
 F:	include/media/i2c/mt9p031.h
@@ -15793,7 +15793,7 @@ MT9T112 APTINA CAMERA SENSOR
 M:	Jacopo Mondi <jacopo@jmondi.org>
 L:	linux-media@vger.kernel.org
 S:	Odd Fixes
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/i2c/mt9t112.c
 F:	include/media/i2c/mt9t112.h
 
@@ -15801,7 +15801,7 @@ MT9V032 APTINA CAMERA SENSOR
 M:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/mt9v032.txt
 F:	drivers/media/i2c/mt9v032.c
 F:	include/media/i2c/mt9v032.h
@@ -15810,7 +15810,7 @@ MT9V111 APTINA CAMERA SENSOR
 M:	Jacopo Mondi <jacopo@jmondi.org>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.yaml
 F:	drivers/media/i2c/mt9v111.c
 
@@ -17005,13 +17005,13 @@ OMNIVISION OV01A10 SENSOR DRIVER
 M:	Bingbu Cao <bingbu.cao@intel.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/i2c/ov01a10.c
 
 OMNIVISION OV02A10 SENSOR DRIVER
 L:	linux-media@vger.kernel.org
 S:	Orphan
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/ovti,ov02a10.yaml
 F:	drivers/media/i2c/ov02a10.c
 
@@ -17019,28 +17019,28 @@ OMNIVISION OV08D10 SENSOR DRIVER
 M:	Jimmy Su <jimmy.su@intel.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/i2c/ov08d10.c
 
 OMNIVISION OV08X40 SENSOR DRIVER
 M:	Jason Chen <jason.z.chen@intel.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/i2c/ov08x40.c
 
 OMNIVISION OV13858 SENSOR DRIVER
 M:	Sakari Ailus <sakari.ailus@linux.intel.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/i2c/ov13858.c
 
 OMNIVISION OV13B10 SENSOR DRIVER
 M:	Arec Kao <arec.kao@intel.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/i2c/ov13b10.c
 
 OMNIVISION OV2680 SENSOR DRIVER
@@ -17048,7 +17048,7 @@ M:	Rui Miguel Silva <rmfrfs@gmail.com>
 M:	Hans de Goede <hansg@kernel.org>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/ovti,ov2680.yaml
 F:	drivers/media/i2c/ov2680.c
 
@@ -17056,7 +17056,7 @@ OMNIVISION OV2685 SENSOR DRIVER
 M:	Shunqian Zheng <zhengsq@rock-chips.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/ovti,ov2685.yaml
 F:	drivers/media/i2c/ov2685.c
 
@@ -17066,14 +17066,14 @@ R:	Sakari Ailus <sakari.ailus@linux.intel.com>
 R:	Bingbu Cao <bingbu.cao@intel.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/i2c/ov2740.c
 
 OMNIVISION OV4689 SENSOR DRIVER
 M:	Mikhail Rudenko <mike.rudenko@gmail.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/ovti,ov4689.yaml
 F:	drivers/media/i2c/ov4689.c
 
@@ -17081,7 +17081,7 @@ OMNIVISION OV5640 SENSOR DRIVER
 M:	Steve Longerbeam <slongerbeam@gmail.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/i2c/ov5640.c
 
 OMNIVISION OV5647 SENSOR DRIVER
@@ -17089,7 +17089,7 @@ M:	Dave Stevenson <dave.stevenson@raspberrypi.com>
 M:	Jacopo Mondi <jacopo@jmondi.org>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/ovti,ov5647.yaml
 F:	drivers/media/i2c/ov5647.c
 
@@ -17097,7 +17097,7 @@ OMNIVISION OV5670 SENSOR DRIVER
 M:	Sakari Ailus <sakari.ailus@linux.intel.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/ovti,ov5670.yaml
 F:	drivers/media/i2c/ov5670.c
 
@@ -17105,7 +17105,7 @@ OMNIVISION OV5675 SENSOR DRIVER
 M:	Sakari Ailus <sakari.ailus@linux.intel.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/ovti,ov5675.yaml
 F:	drivers/media/i2c/ov5675.c
 
@@ -17113,7 +17113,7 @@ OMNIVISION OV5693 SENSOR DRIVER
 M:	Daniel Scally <djrscally@gmail.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/ovti,ov5693.yaml
 F:	drivers/media/i2c/ov5693.c
 
@@ -17121,21 +17121,21 @@ OMNIVISION OV5695 SENSOR DRIVER
 M:	Shunqian Zheng <zhengsq@rock-chips.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/i2c/ov5695.c
 
 OMNIVISION OV64A40 SENSOR DRIVER
 M:	Jacopo Mondi <jacopo.mondi@ideasonboard.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/ovti,ov64a40.yaml
 F:	drivers/media/i2c/ov64a40.c
 
 OMNIVISION OV7670 SENSOR DRIVER
 L:	linux-media@vger.kernel.org
 S:	Orphan
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/ov7670.txt
 F:	drivers/media/i2c/ov7670.c
 
@@ -17143,7 +17143,7 @@ OMNIVISION OV772x SENSOR DRIVER
 M:	Jacopo Mondi <jacopo@jmondi.org>
 L:	linux-media@vger.kernel.org
 S:	Odd fixes
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/ovti,ov772x.yaml
 F:	drivers/media/i2c/ov772x.c
 F:	include/media/i2c/ov772x.h
@@ -17151,7 +17151,7 @@ F:	include/media/i2c/ov772x.h
 OMNIVISION OV7740 SENSOR DRIVER
 L:	linux-media@vger.kernel.org
 S:	Orphan
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/ov7740.txt
 F:	drivers/media/i2c/ov7740.c
 
@@ -17159,7 +17159,7 @@ OMNIVISION OV8856 SENSOR DRIVER
 M:	Sakari Ailus <sakari.ailus@linux.intel.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/ovti,ov8856.yaml
 F:	drivers/media/i2c/ov8856.c
 
@@ -17168,7 +17168,7 @@ M:	Jacopo Mondi <jacopo.mondi@ideasonboard.com>
 M:	Nicholas Roth <nicholas@rothemail.net>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/ovti,ov8858.yaml
 F:	drivers/media/i2c/ov8858.c
 
@@ -17176,7 +17176,7 @@ OMNIVISION OV9282 SENSOR DRIVER
 M:	Dave Stevenson <dave.stevenson@raspberrypi.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/ovti,ov9282.yaml
 F:	drivers/media/i2c/ov9282.c
 
@@ -17192,7 +17192,7 @@ R:	Akinobu Mita <akinobu.mita@gmail.com>
 R:	Sylwester Nawrocki <s.nawrocki@samsung.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/ov9650.txt
 F:	drivers/media/i2c/ov9650.c
 
@@ -17201,7 +17201,7 @@ M:	Tianshu Qiu <tian.shu.qiu@intel.com>
 R:	Bingbu Cao <bingbu.cao@intel.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/i2c/ov9734.c
 
 ONBOARD USB HUB DRIVER
@@ -17503,7 +17503,7 @@ F:	include/uapi/linux/ppdev.h
 PARAVIRT_OPS INTERFACE
 M:	Juergen Gross <jgross@suse.com>
 R:	Ajay Kaher <ajay.kaher@broadcom.com>
-R:	Alexey Makhalov <alexey.amakhalov@broadcom.com>
+R:	Alexey Makhalov <alexey.makhalov@broadcom.com>
 R:	Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
 L:	virtualization@lists.linux.dev
 L:	x86@kernel.org
@@ -18646,7 +18646,7 @@ PULSE8-CEC DRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/cec/usb/pulse8/
 
 PURELIFI PLFXLC DRIVER
@@ -18661,7 +18661,7 @@ L:	pvrusb2@isely.net	(subscribers-only)
 L:	linux-media@vger.kernel.org
 S:	Maintained
 W:	http://www.isely.net/pvrusb2/
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/driver-api/media/drivers/pvrusb2*
 F:	drivers/media/usb/pvrusb2/
 
@@ -18669,7 +18669,7 @@ PWC WEBCAM DRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Odd Fixes
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/usb/pwc/*
 F:	include/trace/events/pwc.h
 
@@ -19173,7 +19173,7 @@ R:	Bryan O'Donoghue <bryan.odonoghue@linaro.org>
 L:	linux-media@vger.kernel.org
 L:	linux-arm-msm@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/*venus*
 F:	drivers/media/platform/qcom/venus/
 
@@ -19218,14 +19218,14 @@ RADIOSHARK RADIO DRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/radio/radio-shark.c
 
 RADIOSHARK2 RADIO DRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/radio/radio-shark2.c
 F:	drivers/media/radio/radio-tea5777.c
 
@@ -19249,7 +19249,7 @@ RAINSHADOW-CEC DRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/cec/usb/rainshadow/
 
 RALINK MIPS ARCHITECTURE
@@ -19333,7 +19333,7 @@ M:	Sean Young <sean@mess.org>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 W:	http://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/driver-api/media/rc-core.rst
 F:	Documentation/userspace-api/media/rc/
 F:	drivers/media/rc/
@@ -20077,7 +20077,7 @@ ROTATION DRIVER FOR ALLWINNER A83T
 M:	Jernej Skrabec <jernej.skrabec@gmail.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/allwinner,sun8i-a83t-de2-rotate.yaml
 F:	drivers/media/platform/sunxi/sun8i-rotate/
 
@@ -20175,6 +20175,7 @@ B:	https://github.com/Rust-for-Linux/linux/issues
 C:	zulip://rust-for-linux.zulipchat.com
 P:	https://rust-for-linux.com/contributing
 T:	git https://github.com/Rust-for-Linux/linux.git rust-next
+F:	.clippy.toml
 F:	Documentation/rust/
 F:	rust/
 F:	samples/rust/
@@ -20182,6 +20183,13 @@ F:	scripts/*rust*
 F:	tools/testing/selftests/rust/
 K:	\b(?i:rust)\b
 
+RUST [ALLOC]
+M:	Danilo Krummrich <dakr@kernel.org>
+L:	rust-for-linux@vger.kernel.org
+S:	Maintained
+F:	rust/kernel/alloc.rs
+F:	rust/kernel/alloc/
+
 RXRPC SOCKETS (AF_RXRPC)
 M:	David Howells <dhowells@redhat.com>
 M:	Marc Dionne <marc.dionne@auristor.com>
@@ -20331,7 +20339,7 @@ M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Odd Fixes
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/i2c/saa6588*
 
 SAA7134 VIDEO4LINUX DRIVER
@@ -20339,7 +20347,7 @@ M:	Mauro Carvalho Chehab <mchehab@kernel.org>
 L:	linux-media@vger.kernel.org
 S:	Odd fixes
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/driver-api/media/drivers/saa7134*
 F:	drivers/media/pci/saa7134/
 
@@ -20347,7 +20355,7 @@ SAA7146 VIDEO4LINUX-2 DRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/common/saa7146/
 F:	drivers/media/pci/saa7146/
 F:	include/media/drv-intf/saa7146*
@@ -20965,7 +20973,7 @@ SHARP RJ54N1CB0C SENSOR DRIVER
 M:	Jacopo Mondi <jacopo@jmondi.org>
 L:	linux-media@vger.kernel.org
 S:	Odd fixes
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/i2c/rj54n1cb0c.c
 F:	include/media/i2c/rj54n1cb0c.h
 
@@ -21015,7 +21023,7 @@ M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Odd Fixes
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/silabs,si470x.yaml
 F:	drivers/media/radio/si470x/radio-si470x-i2c.c
 
@@ -21024,7 +21032,7 @@ M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/radio/si470x/radio-si470x-common.c
 F:	drivers/media/radio/si470x/radio-si470x-usb.c
 F:	drivers/media/radio/si470x/radio-si470x.h
@@ -21034,7 +21042,7 @@ M:	Eduardo Valentin <edubezval@gmail.com>
 L:	linux-media@vger.kernel.org
 S:	Odd Fixes
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/radio/si4713/si4713.?
 
 SI4713 FM RADIO TRANSMITTER PLATFORM DRIVER
@@ -21042,7 +21050,7 @@ M:	Eduardo Valentin <edubezval@gmail.com>
 L:	linux-media@vger.kernel.org
 S:	Odd Fixes
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/radio/si4713/radio-platform-si4713.c
 
 SI4713 FM RADIO TRANSMITTER USB DRIVER
@@ -21050,7 +21058,7 @@ M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/radio/si4713/radio-usb-si4713.c
 
 SIANO DVB DRIVER
@@ -21058,7 +21066,7 @@ M:	Mauro Carvalho Chehab <mchehab@kernel.org>
 L:	linux-media@vger.kernel.org
 S:	Odd fixes
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/common/siano/
 F:	drivers/media/mmc/siano/
 F:	drivers/media/usb/siano/
@@ -21434,14 +21442,14 @@ SONY IMX208 SENSOR DRIVER
 M:	Sakari Ailus <sakari.ailus@linux.intel.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/i2c/imx208.c
 
 SONY IMX214 SENSOR DRIVER
 M:	Ricardo Ribalda <ribalda@kernel.org>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml
 F:	drivers/media/i2c/imx214.c
 
@@ -21449,7 +21457,7 @@ SONY IMX219 SENSOR DRIVER
 M:	Dave Stevenson <dave.stevenson@raspberrypi.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/imx219.yaml
 F:	drivers/media/i2c/imx219.c
 
@@ -21457,7 +21465,7 @@ SONY IMX258 SENSOR DRIVER
 M:	Sakari Ailus <sakari.ailus@linux.intel.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/sony,imx258.yaml
 F:	drivers/media/i2c/imx258.c
 
@@ -21465,7 +21473,7 @@ SONY IMX274 SENSOR DRIVER
 M:	Leon Luo <leonl@leopardimaging.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml
 F:	drivers/media/i2c/imx274.c
 
@@ -21474,7 +21482,7 @@ M:	Kieran Bingham <kieran.bingham@ideasonboard.com>
 M:	Umang Jain <umang.jain@ideasonboard.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/sony,imx283.yaml
 F:	drivers/media/i2c/imx283.c
 
@@ -21482,7 +21490,7 @@ SONY IMX290 SENSOR DRIVER
 M:	Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/sony,imx290.yaml
 F:	drivers/media/i2c/imx290.c
 
@@ -21491,7 +21499,7 @@ M:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
 M:	Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/sony,imx296.yaml
 F:	drivers/media/i2c/imx296.c
 
@@ -21499,20 +21507,20 @@ SONY IMX319 SENSOR DRIVER
 M:	Bingbu Cao <bingbu.cao@intel.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/i2c/imx319.c
 
 SONY IMX334 SENSOR DRIVER
 L:	linux-media@vger.kernel.org
 S:	Orphan
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/sony,imx334.yaml
 F:	drivers/media/i2c/imx334.c
 
 SONY IMX335 SENSOR DRIVER
 L:	linux-media@vger.kernel.org
 S:	Orphan
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/sony,imx335.yaml
 F:	drivers/media/i2c/imx335.c
 
@@ -21520,13 +21528,13 @@ SONY IMX355 SENSOR DRIVER
 M:	Tianshu Qiu <tian.shu.qiu@intel.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/i2c/imx355.c
 
 SONY IMX412 SENSOR DRIVER
 L:	linux-media@vger.kernel.org
 S:	Orphan
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/sony,imx412.yaml
 F:	drivers/media/i2c/imx412.c
 
@@ -21534,7 +21542,7 @@ SONY IMX415 SENSOR DRIVER
 M:	Michael Riesch <michael.riesch@wolfvision.net>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/sony,imx415.yaml
 F:	drivers/media/i2c/imx415.c
 
@@ -21823,7 +21831,7 @@ M:	Benjamin Mugnier <benjamin.mugnier@foss.st.com>
 M:	Sylvain Petinot <sylvain.petinot@foss.st.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/st,st-mipid02.yaml
 F:	drivers/media/i2c/st-mipid02.c
 
@@ -21859,7 +21867,7 @@ M:	Benjamin Mugnier <benjamin.mugnier@foss.st.com>
 M:	Sylvain Petinot <sylvain.petinot@foss.st.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/st,st-vgxy61.yaml
 F:	Documentation/userspace-api/media/drivers/vgxy61.rst
 F:	drivers/media/i2c/vgxy61.c
@@ -21918,11 +21926,6 @@ S:	Maintained
 W:	http://wiki.laptop.org/go/DCON
 F:	drivers/staging/olpc_dcon/
 
-STAGING - REALTEK RTL8712U DRIVERS
-M:	Florian Schilhabel <florian.c.schilhabel@googlemail.com>.
-S:	Odd Fixes
-F:	drivers/staging/rtl8712/
-
 STAGING - SEPS525 LCD CONTROLLER DRIVERS
 M:	Michael Hennerich <michael.hennerich@analog.com>
 L:	linux-fbdev@vger.kernel.org
@@ -22149,7 +22152,7 @@ STK1160 USB VIDEO CAPTURE DRIVER
 M:	Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/usb/stk1160/
 
 STM32 AUDIO (ASoC) DRIVERS
@@ -22586,7 +22589,7 @@ L:	linux-media@vger.kernel.org
 S:	Maintained
 W:	https://linuxtv.org
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/tuners/tda18250*
 
 TDA18271 MEDIA DRIVER
@@ -22632,7 +22635,7 @@ M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/i2c/tda9840*
 
 TEA5761 TUNER DRIVER
@@ -22640,7 +22643,7 @@ M:	Mauro Carvalho Chehab <mchehab@kernel.org>
 L:	linux-media@vger.kernel.org
 S:	Odd fixes
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/tuners/tea5761.*
 
 TEA5767 TUNER DRIVER
@@ -22648,7 +22651,7 @@ M:	Mauro Carvalho Chehab <mchehab@kernel.org>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/tuners/tea5767.*
 
 TEA6415C MEDIA DRIVER
@@ -22656,7 +22659,7 @@ M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/i2c/tea6415c*
 
 TEA6420 MEDIA DRIVER
@@ -22664,7 +22667,7 @@ M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/i2c/tea6420*
 
 TEAM DRIVER
@@ -22952,7 +22955,7 @@ M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/radio/radio-raremono.c
 
 THERMAL
@@ -23028,7 +23031,7 @@ M:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
 M:	Paul Elder <paul.elder@ideasonboard.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/thine,thp7312.yaml
 F:	Documentation/userspace-api/media/drivers/thp7312.rst
 F:	drivers/media/i2c/thp7312.c
@@ -23615,7 +23618,7 @@ M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Odd Fixes
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/pci/tw68/
 
 TW686X VIDEO4LINUX DRIVER
@@ -23623,7 +23626,7 @@ M:	Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 W:	http://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/pci/tw686x/
 
 U-BOOT ENVIRONMENT VARIABLES
@@ -24106,7 +24109,7 @@ M:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 W:	http://www.ideasonboard.org/uvc/
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/usb/uvc/
 F:	include/uapi/linux/uvcvideo.h
 
@@ -24212,7 +24215,7 @@ V4L2 ASYNC AND FWNODE FRAMEWORKS
 M:	Sakari Ailus <sakari.ailus@linux.intel.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/v4l2-core/v4l2-async.c
 F:	drivers/media/v4l2-core/v4l2-fwnode.c
 F:	include/media/v4l2-async.h
@@ -24378,7 +24381,7 @@ M:	Hans Verkuil <hverkuil-cisco@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/test-drivers/vicodec/*
 
 VIDEO I2C POLLING DRIVER
@@ -24406,7 +24409,7 @@ M:	Daniel W. S. Almeida <dwlsalmeida@gmail.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/test-drivers/vidtv/*
 
 VIMC VIRTUAL MEDIA CONTROLLER DRIVER
@@ -24415,7 +24418,7 @@ R:	Kieran Bingham <kieran.bingham@ideasonboard.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/test-drivers/vimc/*
 
 VIRT LIB
@@ -24663,7 +24666,7 @@ M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/test-drivers/vivid/*
 
 VM SOCKETS (AF_VSOCK)
@@ -24721,7 +24724,7 @@ F:	drivers/misc/vmw_balloon.c
 
 VMWARE HYPERVISOR INTERFACE
 M:	Ajay Kaher <ajay.kaher@broadcom.com>
-M:	Alexey Makhalov <alexey.amakhalov@broadcom.com>
+M:	Alexey Makhalov <alexey.makhalov@broadcom.com>
 R:	Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
 L:	virtualization@lists.linux.dev
 L:	x86@kernel.org
@@ -24749,7 +24752,7 @@ F:	drivers/scsi/vmw_pvscsi.h
 VMWARE VIRTUAL PTP CLOCK DRIVER
 M:	Nick Shi <nick.shi@broadcom.com>
 R:	Ajay Kaher <ajay.kaher@broadcom.com>
-R:	Alexey Makhalov <alexey.amakhalov@broadcom.com>
+R:	Alexey Makhalov <alexey.makhalov@broadcom.com>
 R:	Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
 L:	netdev@vger.kernel.org
 S:	Supported
@@ -25217,7 +25220,7 @@ M:	Mauro Carvalho Chehab <mchehab@kernel.org>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 W:	https://linuxtv.org
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	drivers/media/tuners/xc2028.*
 
 XDP (eXpress Data Path)
@@ -25358,8 +25361,7 @@ F:	include/xen/arm/swiotlb-xen.h
 F:	include/xen/swiotlb-xen.h
 
 XFS FILESYSTEM
-M:	Carlos Maiolino <cem@kernel.org>
-R:	Darrick J. Wong <djwong@kernel.org>
+M:	Darrick J. Wong <djwong@kernel.org>
 L:	linux-xfs@vger.kernel.org
 S:	Supported
 W:	http://xfs.org/
@@ -25441,7 +25443,7 @@ XILINX VIDEO IP CORES
 M:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
 L:	linux-media@vger.kernel.org
 S:	Supported
-T:	git git://linuxtv.org/media_tree.git
+T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/xilinx/
 F:	drivers/media/platform/xilinx/
 F:	include/uapi/linux/xilinx-v4l2-controls.h
diff --git linux-libre-6.12-gnu/Makefile linux-libre-6.12.79-gnu/Makefile
index ecbcb046125a..c0e92e034c96 100644
--- linux-libre-6.12-gnu/Makefile
+++ linux-libre-6.12.79-gnu/Makefile
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 VERSION = 6
 PATCHLEVEL = 12
-SUBLEVEL = 0
+SUBLEVEL = 79
 EXTRAVERSION = -gnu
 NAME = Baby Opossum Posse
 
@@ -446,18 +446,23 @@ KBUILD_USERLDFLAGS := $(USERLDFLAGS)
 export rust_common_flags := --edition=2021 \
 			    -Zbinary_dep_depinfo=y \
 			    -Astable_features \
-			    -Dunsafe_op_in_unsafe_fn \
+			    -Aunused_features \
 			    -Dnon_ascii_idents \
+			    -Dunsafe_op_in_unsafe_fn \
+			    -Wmissing_docs \
 			    -Wrust_2018_idioms \
 			    -Wunreachable_pub \
-			    -Wmissing_docs \
-			    -Wrustdoc::missing_crate_level_docs \
 			    -Wclippy::all \
+			    -Wclippy::ignored_unit_patterns \
 			    -Wclippy::mut_mut \
 			    -Wclippy::needless_bitwise_bool \
-			    -Wclippy::needless_continue \
+			    -Aclippy::needless_lifetimes \
 			    -Wclippy::no_mangle_with_rust_abi \
-			    -Wclippy::dbg_macro
+			    -Wclippy::undocumented_unsafe_blocks \
+			    -Wclippy::unnecessary_safety_comment \
+			    -Wclippy::unnecessary_safety_doc \
+			    -Wrustdoc::missing_crate_level_docs \
+			    -Wrustdoc::unescaped_backticks
 
 KBUILD_HOSTCFLAGS   := $(KBUILD_USERHOSTCFLAGS) $(HOST_LFS_CFLAGS) \
 		       $(HOSTCFLAGS) -I $(srctree)/scripts/include
@@ -508,7 +513,7 @@ KGZIP		= gzip
 KBZIP2		= bzip2
 KLZOP		= lzop
 LZMA		= lzma
-LZ4		= lz4c
+LZ4		= lz4
 XZ		= xz
 ZSTD		= zstd
 
@@ -582,6 +587,9 @@ endif
 # Allows the usage of unstable features in stable compilers.
 export RUSTC_BOOTSTRAP := 1
 
+# Allows finding `.clippy.toml` in out-of-srctree builds.
+export CLIPPY_CONF_DIR := $(srctree)
+
 export ARCH SRCARCH CONFIG_SHELL BASH HOSTCC KBUILD_HOSTCFLAGS CROSS_COMPILE LD CC HOSTPKG_CONFIG
 export RUSTC RUSTDOC RUSTFMT RUSTC_OR_CLIPPY_QUIET RUSTC_OR_CLIPPY BINDGEN
 export HOSTRUSTC KBUILD_HOSTRUSTFLAGS
@@ -990,10 +998,6 @@ NOSTDINC_FLAGS += -nostdinc
 # perform bounds checking.
 KBUILD_CFLAGS += $(call cc-option, -fstrict-flex-arrays=3)
 
-#Currently, disable -Wstringop-overflow for GCC 11, globally.
-KBUILD_CFLAGS-$(CONFIG_CC_NO_STRINGOP_OVERFLOW) += $(call cc-option, -Wno-stringop-overflow)
-KBUILD_CFLAGS-$(CONFIG_CC_STRINGOP_OVERFLOW) += $(call cc-option, -Wstringop-overflow)
-
 # disable invalid "can't wrap" optimizations for signed / pointers
 KBUILD_CFLAGS	+= -fno-strict-overflow
 
@@ -1005,6 +1009,12 @@ ifdef CONFIG_CC_IS_GCC
 KBUILD_CFLAGS   += -fconserve-stack
 endif
 
+# Ensure compilers do not transform certain loops into calls to wcslen()
+KBUILD_CFLAGS += -fno-builtin-wcslen
+
+# Ensure compilers do not transform certain loops into calls to wcslen()
+KBUILD_CFLAGS += -fno-builtin-wcslen
+
 # change __FILE__ to the relative path from the srctree
 KBUILD_CPPFLAGS += $(call cc-option,-fmacro-prefix-map=$(srctree)/=)
 
@@ -1056,8 +1066,13 @@ LDFLAGS_vmlinux += --orphan-handling=$(CONFIG_LD_ORPHAN_WARN_LEVEL)
 endif
 
 # Align the bit size of userspace programs with the kernel
-KBUILD_USERCFLAGS  += $(filter -m32 -m64 --target=%, $(KBUILD_CFLAGS))
-KBUILD_USERLDFLAGS += $(filter -m32 -m64 --target=%, $(KBUILD_CFLAGS))
+KBUILD_USERCFLAGS  += $(filter -m32 -m64 --target=%, $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS))
+KBUILD_USERLDFLAGS += $(filter -m32 -m64 --target=%, $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS))
+
+# userspace programs are linked via the compiler, use the correct linker
+ifdef CONFIG_CC_IS_CLANG
+KBUILD_USERLDFLAGS += --ld-path=$(LD)
+endif
 
 # make the checker run with the right architecture
 CHECKFLAGS += --arch=$(ARCH)
@@ -1356,18 +1371,22 @@ ifneq ($(wildcard $(resolve_btfids_O)),)
 	$(Q)$(MAKE) -sC $(srctree)/tools/bpf/resolve_btfids O=$(resolve_btfids_O) clean
 endif
 
-# Clear a bunch of variables before executing the submake
-ifeq ($(quiet),silent_)
-tools_silent=s
+PHONY += objtool_clean objtool_mrproper
+
+objtool_O = $(abspath $(objtree))/tools/objtool
+
+objtool_clean objtool_mrproper:
+ifneq ($(wildcard $(objtool_O)),)
+	$(Q)$(MAKE) -sC $(abs_srctree)/tools/objtool O=$(objtool_O) srctree=$(abs_srctree) $(patsubst objtool_%,%,$@)
 endif
 
 tools/: FORCE
 	$(Q)mkdir -p $(objtree)/tools
-	$(Q)$(MAKE) LDFLAGS= MAKEFLAGS="$(tools_silent) $(filter --j% -j,$(MAKEFLAGS))" O=$(abspath $(objtree)) subdir=tools -C $(srctree)/tools/
+	$(Q)$(MAKE) O=$(abspath $(objtree)) subdir=tools -C $(srctree)/tools/
 
 tools/%: FORCE
 	$(Q)mkdir -p $(objtree)/tools
-	$(Q)$(MAKE) LDFLAGS= MAKEFLAGS="$(tools_silent) $(filter --j% -j,$(MAKEFLAGS))" O=$(abspath $(objtree)) subdir=tools -C $(srctree)/tools/ $*
+	$(Q)$(MAKE) O=$(abspath $(objtree)) subdir=tools -C $(srctree)/tools/ $*
 
 # ---------------------------------------------------------------------------
 # Kernel selftest
@@ -1518,7 +1537,7 @@ vmlinuxclean:
 	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/link-vmlinux.sh clean
 	$(Q)$(if $(ARCH_POSTLINK), $(MAKE) -f $(ARCH_POSTLINK) clean)
 
-clean: archclean vmlinuxclean resolve_btfids_clean
+clean: archclean vmlinuxclean resolve_btfids_clean objtool_clean
 
 # mrproper - Delete all generated files, including .config
 #
@@ -1529,7 +1548,7 @@ PHONY += $(mrproper-dirs) mrproper
 $(mrproper-dirs):
 	$(Q)$(MAKE) $(clean)=$(patsubst _mrproper_%,%,$@)
 
-mrproper: clean $(mrproper-dirs)
+mrproper: clean objtool_mrproper $(mrproper-dirs)
 	$(call cmd,rmfiles)
 	@find . $(RCS_FIND_IGNORE) \
 		\( -name '*.rmeta' \) \
diff --git linux-libre-6.12-gnu/arch/Kconfig linux-libre-6.12.79-gnu/arch/Kconfig
index bd9f095d69fa..1812e4e4d714 100644
--- linux-libre-6.12-gnu/arch/Kconfig
+++ linux-libre-6.12.79-gnu/arch/Kconfig
@@ -135,6 +135,7 @@ config KPROBES_ON_FTRACE
 config UPROBES
 	def_bool n
 	depends on ARCH_SUPPORTS_UPROBES
+	select TASKS_TRACE_RCU
 	help
 	  Uprobes is the user-space counterpart to kprobes: they
 	  enable instrumentation applications (such as 'perf probe')
@@ -861,6 +862,7 @@ config HAVE_CFI_ICALL_NORMALIZE_INTEGERS_RUSTC
 	def_bool y
 	depends on HAVE_CFI_ICALL_NORMALIZE_INTEGERS_CLANG
 	depends on RUSTC_VERSION >= 107900
+	depends on ARM64 || X86_64
 	# With GCOV/KASAN we need this fix: https://github.com/rust-lang/rust/pull/129373
 	depends on (RUSTC_LLVM_VERSION >= 190103 && RUSTC_VERSION >= 108200) || \
 		(!GCOV_KERNEL && !KASAN_GENERIC && !KASAN_SW_TAGS)
diff --git linux-libre-6.12-gnu/arch/alpha/include/asm/elf.h linux-libre-6.12.79-gnu/arch/alpha/include/asm/elf.h
index 4d7c46f50382..50c82187e60e 100644
--- linux-libre-6.12-gnu/arch/alpha/include/asm/elf.h
+++ linux-libre-6.12.79-gnu/arch/alpha/include/asm/elf.h
@@ -74,7 +74,7 @@ typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG];
 /*
  * This is used to ensure we don't load something for the wrong architecture.
  */
-#define elf_check_arch(x) ((x)->e_machine == EM_ALPHA)
+#define elf_check_arch(x) (((x)->e_machine == EM_ALPHA) && !((x)->e_flags & EF_ALPHA_32BIT))
 
 /*
  * These are used to set parameters in the core dumps.
@@ -137,10 +137,6 @@ extern int dump_elf_task(elf_greg_t *dest, struct task_struct *task);
 	: amask (AMASK_CIX) ? "ev6" : "ev67");	\
 })
 
-#define SET_PERSONALITY(EX)					\
-	set_personality(((EX).e_flags & EF_ALPHA_32BIT)		\
-	   ? PER_LINUX_32BIT : PER_LINUX)
-
 extern int alpha_l1i_cacheshape;
 extern int alpha_l1d_cacheshape;
 extern int alpha_l2_cacheshape;
diff --git linux-libre-6.12-gnu/arch/alpha/include/asm/pgtable.h linux-libre-6.12.79-gnu/arch/alpha/include/asm/pgtable.h
index 635f0a5f5bbd..8b620551304e 100644
--- linux-libre-6.12-gnu/arch/alpha/include/asm/pgtable.h
+++ linux-libre-6.12.79-gnu/arch/alpha/include/asm/pgtable.h
@@ -17,6 +17,7 @@
 #include <asm/processor.h>	/* For TASK_SIZE */
 #include <asm/machvec.h>
 #include <asm/setup.h>
+#include <linux/page_table_check.h>
 
 struct mm_struct;
 struct vm_area_struct;
@@ -213,6 +214,9 @@ extern inline void pud_set(pud_t * pudp, pmd_t * pmdp)
 { pud_val(*pudp) = _PAGE_TABLE | ((((unsigned long) pmdp) - PAGE_OFFSET) << (32-PAGE_SHIFT)); }
 
 
+extern void migrate_flush_tlb_page(struct vm_area_struct *vma,
+					unsigned long addr);
+
 extern inline unsigned long
 pmd_page_vaddr(pmd_t pmd)
 {
@@ -232,7 +236,7 @@ extern inline int pte_none(pte_t pte)		{ return !pte_val(pte); }
 extern inline int pte_present(pte_t pte)	{ return pte_val(pte) & _PAGE_VALID; }
 extern inline void pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
 {
-	pte_val(*ptep) = 0;
+	WRITE_ONCE(pte_val(*ptep), 0);
 }
 
 extern inline int pmd_none(pmd_t pmd)		{ return !pmd_val(pmd); }
@@ -294,6 +298,33 @@ extern inline pte_t * pte_offset_kernel(pmd_t * dir, unsigned long address)
 
 extern pgd_t swapper_pg_dir[1024];
 
+#ifdef CONFIG_COMPACTION
+#define __HAVE_ARCH_PTEP_GET_AND_CLEAR
+
+static inline pte_t ptep_get_and_clear(struct mm_struct *mm,
+					unsigned long address,
+					pte_t *ptep)
+{
+	pte_t pte = READ_ONCE(*ptep);
+
+	pte_clear(mm, address, ptep);
+	return pte;
+}
+
+#define __HAVE_ARCH_PTEP_CLEAR_FLUSH
+
+static inline pte_t ptep_clear_flush(struct vm_area_struct *vma,
+				unsigned long addr, pte_t *ptep)
+{
+	struct mm_struct *mm = vma->vm_mm;
+	pte_t pte = ptep_get_and_clear(mm, addr, ptep);
+
+	page_table_check_pte_clear(mm, pte);
+	migrate_flush_tlb_page(vma, addr);
+	return pte;
+}
+
+#endif
 /*
  * The Alpha doesn't have any external MMU info:  the kernel page
  * tables contain all the necessary information.
@@ -360,7 +391,7 @@ static inline pte_t pte_swp_clear_exclusive(pte_t pte)
 
 extern void paging_init(void);
 
-/* We have our own get_unmapped_area to cope with ADDR_LIMIT_32BIT.  */
+/* We have our own get_unmapped_area */
 #define HAVE_ARCH_UNMAPPED_AREA
 
 #endif /* _ALPHA_PGTABLE_H */
diff --git linux-libre-6.12-gnu/arch/alpha/include/asm/processor.h linux-libre-6.12.79-gnu/arch/alpha/include/asm/processor.h
index 55bb1c09fd39..5dce5518a211 100644
--- linux-libre-6.12-gnu/arch/alpha/include/asm/processor.h
+++ linux-libre-6.12.79-gnu/arch/alpha/include/asm/processor.h
@@ -8,23 +8,19 @@
 #ifndef __ASM_ALPHA_PROCESSOR_H
 #define __ASM_ALPHA_PROCESSOR_H
 
-#include <linux/personality.h>	/* for ADDR_LIMIT_32BIT */
-
 /*
  * We have a 42-bit user address space: 4TB user VM...
  */
 #define TASK_SIZE (0x40000000000UL)
 
-#define STACK_TOP \
-  (current->personality & ADDR_LIMIT_32BIT ? 0x80000000 : 0x00120000000UL)
+#define STACK_TOP (0x00120000000UL)
 
 #define STACK_TOP_MAX	0x00120000000UL
 
 /* This decides where the kernel will search for a free chunk of vm
  * space during mmap's.
  */
-#define TASK_UNMAPPED_BASE \
-  ((current->personality & ADDR_LIMIT_32BIT) ? 0x40000000 : TASK_SIZE / 2)
+#define TASK_UNMAPPED_BASE (TASK_SIZE / 2)
 
 /* This is dead.  Everything has been moved to thread_info.  */
 struct thread_struct { };
diff --git linux-libre-6.12-gnu/arch/alpha/include/asm/tlbflush.h linux-libre-6.12.79-gnu/arch/alpha/include/asm/tlbflush.h
index ba4b359d6c39..0c8529997f54 100644
--- linux-libre-6.12-gnu/arch/alpha/include/asm/tlbflush.h
+++ linux-libre-6.12.79-gnu/arch/alpha/include/asm/tlbflush.h
@@ -58,7 +58,9 @@ flush_tlb_other(struct mm_struct *mm)
 	unsigned long *mmc = &mm->context[smp_processor_id()];
 	/* Check it's not zero first to avoid cacheline ping pong
 	   when possible.  */
-	if (*mmc) *mmc = 0;
+
+	if (READ_ONCE(*mmc))
+		WRITE_ONCE(*mmc, 0);
 }
 
 #ifndef CONFIG_SMP
diff --git linux-libre-6.12-gnu/arch/alpha/include/uapi/asm/ioctls.h linux-libre-6.12.79-gnu/arch/alpha/include/uapi/asm/ioctls.h
index 971311605288..a09d04b49cc6 100644
--- linux-libre-6.12-gnu/arch/alpha/include/uapi/asm/ioctls.h
+++ linux-libre-6.12.79-gnu/arch/alpha/include/uapi/asm/ioctls.h
@@ -23,10 +23,10 @@
 #define TCSETSW		_IOW('t', 21, struct termios)
 #define TCSETSF		_IOW('t', 22, struct termios)
 
-#define TCGETA		_IOR('t', 23, struct termio)
-#define TCSETA		_IOW('t', 24, struct termio)
-#define TCSETAW		_IOW('t', 25, struct termio)
-#define TCSETAF		_IOW('t', 28, struct termio)
+#define TCGETA          0x40127417
+#define TCSETA          0x80127418
+#define TCSETAW         0x80127419
+#define TCSETAF         0x8012741c
 
 #define TCSBRK		_IO('t', 29)
 #define TCXONC		_IO('t', 30)
diff --git linux-libre-6.12-gnu/arch/alpha/include/uapi/asm/ptrace.h linux-libre-6.12.79-gnu/arch/alpha/include/uapi/asm/ptrace.h
index 5ca45934fcbb..72ed913a910f 100644
--- linux-libre-6.12-gnu/arch/alpha/include/uapi/asm/ptrace.h
+++ linux-libre-6.12.79-gnu/arch/alpha/include/uapi/asm/ptrace.h
@@ -42,6 +42,8 @@ struct pt_regs {
 	unsigned long trap_a0;
 	unsigned long trap_a1;
 	unsigned long trap_a2;
+/* This makes the stack 16-byte aligned as GCC expects */
+	unsigned long __pad0;
 /* These are saved by PAL-code: */
 	unsigned long ps;
 	unsigned long pc;
diff --git linux-libre-6.12-gnu/arch/alpha/kernel/asm-offsets.c linux-libre-6.12.79-gnu/arch/alpha/kernel/asm-offsets.c
index 4cfeae42c79a..1ebb05890499 100644
--- linux-libre-6.12-gnu/arch/alpha/kernel/asm-offsets.c
+++ linux-libre-6.12.79-gnu/arch/alpha/kernel/asm-offsets.c
@@ -4,6 +4,7 @@
  * This code generates raw asm output which is post-processed to extract
  * and format the required data.
  */
+#define COMPILE_OFFSETS
 
 #include <linux/types.h>
 #include <linux/stddef.h>
@@ -19,9 +20,13 @@ static void __used foo(void)
 	DEFINE(TI_STATUS, offsetof(struct thread_info, status));
 	BLANK();
 
+	DEFINE(SP_OFF, offsetof(struct pt_regs, ps));
 	DEFINE(SIZEOF_PT_REGS, sizeof(struct pt_regs));
 	BLANK();
 
+	DEFINE(SWITCH_STACK_SIZE, sizeof(struct switch_stack));
+	BLANK();
+
 	DEFINE(HAE_CACHE, offsetof(struct alpha_machine_vector, hae_cache));
 	DEFINE(HAE_REG, offsetof(struct alpha_machine_vector, hae_register));
 }
diff --git linux-libre-6.12-gnu/arch/alpha/kernel/entry.S linux-libre-6.12.79-gnu/arch/alpha/kernel/entry.S
index dd26062d75b3..f4d41b4538c2 100644
--- linux-libre-6.12-gnu/arch/alpha/kernel/entry.S
+++ linux-libre-6.12.79-gnu/arch/alpha/kernel/entry.S
@@ -15,10 +15,6 @@
 	.set noat
 	.cfi_sections	.debug_frame
 
-/* Stack offsets.  */
-#define SP_OFF			184
-#define SWITCH_STACK_SIZE	64
-
 .macro	CFI_START_OSF_FRAME	func
 	.align	4
 	.globl	\func
@@ -198,8 +194,8 @@ CFI_END_OSF_FRAME entArith
 CFI_START_OSF_FRAME entMM
 	SAVE_ALL
 /* save $9 - $15 so the inline exception code can manipulate them.  */
-	subq	$sp, 56, $sp
-	.cfi_adjust_cfa_offset	56
+	subq	$sp, 64, $sp
+	.cfi_adjust_cfa_offset	64
 	stq	$9, 0($sp)
 	stq	$10, 8($sp)
 	stq	$11, 16($sp)
@@ -214,7 +210,7 @@ CFI_START_OSF_FRAME entMM
 	.cfi_rel_offset	$13, 32
 	.cfi_rel_offset	$14, 40
 	.cfi_rel_offset	$15, 48
-	addq	$sp, 56, $19
+	addq	$sp, 64, $19
 /* handle the fault */
 	lda	$8, 0x3fff
 	bic	$sp, $8, $8
@@ -227,7 +223,7 @@ CFI_START_OSF_FRAME entMM
 	ldq	$13, 32($sp)
 	ldq	$14, 40($sp)
 	ldq	$15, 48($sp)
-	addq	$sp, 56, $sp
+	addq	$sp, 64, $sp
 	.cfi_restore	$9
 	.cfi_restore	$10
 	.cfi_restore	$11
@@ -235,7 +231,7 @@ CFI_START_OSF_FRAME entMM
 	.cfi_restore	$13
 	.cfi_restore	$14
 	.cfi_restore	$15
-	.cfi_adjust_cfa_offset	-56
+	.cfi_adjust_cfa_offset	-64
 /* finish up the syscall as normal.  */
 	br	ret_from_sys_call
 CFI_END_OSF_FRAME entMM
@@ -382,8 +378,8 @@ entUnaUser:
 	.cfi_restore	$0
 	.cfi_adjust_cfa_offset	-256
 	SAVE_ALL		/* setup normal kernel stack */
-	lda	$sp, -56($sp)
-	.cfi_adjust_cfa_offset	56
+	lda	$sp, -64($sp)
+	.cfi_adjust_cfa_offset	64
 	stq	$9, 0($sp)
 	stq	$10, 8($sp)
 	stq	$11, 16($sp)
@@ -399,7 +395,7 @@ entUnaUser:
 	.cfi_rel_offset	$14, 40
 	.cfi_rel_offset	$15, 48
 	lda	$8, 0x3fff
-	addq	$sp, 56, $19
+	addq	$sp, 64, $19
 	bic	$sp, $8, $8
 	jsr	$26, do_entUnaUser
 	ldq	$9, 0($sp)
@@ -409,7 +405,7 @@ entUnaUser:
 	ldq	$13, 32($sp)
 	ldq	$14, 40($sp)
 	ldq	$15, 48($sp)
-	lda	$sp, 56($sp)
+	lda	$sp, 64($sp)
 	.cfi_restore	$9
 	.cfi_restore	$10
 	.cfi_restore	$11
@@ -417,7 +413,7 @@ entUnaUser:
 	.cfi_restore	$13
 	.cfi_restore	$14
 	.cfi_restore	$15
-	.cfi_adjust_cfa_offset	-56
+	.cfi_adjust_cfa_offset	-64
 	br	ret_from_sys_call
 CFI_END_OSF_FRAME entUna
 
diff --git linux-libre-6.12-gnu/arch/alpha/kernel/osf_sys.c linux-libre-6.12.79-gnu/arch/alpha/kernel/osf_sys.c
index c0424de9e7cd..077a1407be6d 100644
--- linux-libre-6.12-gnu/arch/alpha/kernel/osf_sys.c
+++ linux-libre-6.12.79-gnu/arch/alpha/kernel/osf_sys.c
@@ -1211,8 +1211,7 @@ SYSCALL_DEFINE1(old_adjtimex, struct timex32 __user *, txc_p)
 	return ret;
 }
 
-/* Get an address range which is currently unmapped.  Similar to the
-   generic version except that we know how to honor ADDR_LIMIT_32BIT.  */
+/* Get an address range which is currently unmapped. */
 
 static unsigned long
 arch_get_unmapped_area_1(unsigned long addr, unsigned long len,
@@ -1231,13 +1230,7 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr,
 		       unsigned long len, unsigned long pgoff,
 		       unsigned long flags, vm_flags_t vm_flags)
 {
-	unsigned long limit;
-
-	/* "32 bit" actually means 31 bit, since pointers sign extend.  */
-	if (current->personality & ADDR_LIMIT_32BIT)
-		limit = 0x80000000;
-	else
-		limit = TASK_SIZE;
+	unsigned long limit = TASK_SIZE;
 
 	if (len > limit)
 		return -ENOMEM;
diff --git linux-libre-6.12-gnu/arch/alpha/kernel/traps.c linux-libre-6.12.79-gnu/arch/alpha/kernel/traps.c
index a9a38c80c4a7..7004397937cf 100644
--- linux-libre-6.12-gnu/arch/alpha/kernel/traps.c
+++ linux-libre-6.12.79-gnu/arch/alpha/kernel/traps.c
@@ -649,7 +649,7 @@ s_reg_to_mem (unsigned long s_reg)
 static int unauser_reg_offsets[32] = {
 	R(r0), R(r1), R(r2), R(r3), R(r4), R(r5), R(r6), R(r7), R(r8),
 	/* r9 ... r15 are stored in front of regs.  */
-	-56, -48, -40, -32, -24, -16, -8,
+	-64, -56, -48, -40, -32, -24, -16,	/* padding at -8 */
 	R(r16), R(r17), R(r18),
 	R(r19), R(r20), R(r21), R(r22), R(r23), R(r24), R(r25), R(r26),
 	R(r27), R(r28), R(gp),
diff --git linux-libre-6.12-gnu/arch/alpha/mm/Makefile linux-libre-6.12.79-gnu/arch/alpha/mm/Makefile
index 101dbd06b4ce..2d05664058f6 100644
--- linux-libre-6.12-gnu/arch/alpha/mm/Makefile
+++ linux-libre-6.12.79-gnu/arch/alpha/mm/Makefile
@@ -3,4 +3,4 @@
 # Makefile for the linux alpha-specific parts of the memory manager.
 #
 
-obj-y	:= init.o fault.o
+obj-y	:= init.o fault.o tlbflush.o
diff --git linux-libre-6.12-gnu/arch/alpha/mm/fault.c linux-libre-6.12.79-gnu/arch/alpha/mm/fault.c
index 8c9850437e67..a9816bbc9f34 100644
--- linux-libre-6.12-gnu/arch/alpha/mm/fault.c
+++ linux-libre-6.12.79-gnu/arch/alpha/mm/fault.c
@@ -78,8 +78,8 @@ __load_new_mm_context(struct mm_struct *next_mm)
 
 /* Macro for exception fixup code to access integer registers.  */
 #define dpf_reg(r)							\
-	(((unsigned long *)regs)[(r) <= 8 ? (r) : (r) <= 15 ? (r)-16 :	\
-				 (r) <= 18 ? (r)+10 : (r)-10])
+	(((unsigned long *)regs)[(r) <= 8 ? (r) : (r) <= 15 ? (r)-17 :	\
+				 (r) <= 18 ? (r)+11 : (r)-10])
 
 asmlinkage void
 do_page_fault(unsigned long address, unsigned long mmcsr,
diff --git linux-libre-6.12-gnu/arch/alpha/mm/tlbflush.c linux-libre-6.12.79-gnu/arch/alpha/mm/tlbflush.c
new file mode 100644
index 000000000000..ccbc317b9a34
--- /dev/null
+++ linux-libre-6.12.79-gnu/arch/alpha/mm/tlbflush.c
@@ -0,0 +1,112 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Alpha TLB shootdown helpers
+ *
+ * Copyright (C) 2025 Magnus Lindholm <linmag7@gmail.com>
+ *
+ * Alpha-specific TLB flush helpers that cannot be expressed purely
+ * as inline functions.
+ *
+ * These helpers provide combined MM context handling (ASN rollover)
+ * and immediate TLB invalidation for page migration and memory
+ * compaction paths, where lazy shootdowns are insufficient.
+ */
+
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/sched.h>
+#include <asm/tlbflush.h>
+#include <asm/pal.h>
+#include <asm/mmu_context.h>
+
+#define asn_locked() (cpu_data[smp_processor_id()].asn_lock)
+
+/*
+ * Migration/compaction helper: combine mm context (ASN) handling with an
+ * immediate per-page TLB invalidate and (for exec) an instruction barrier.
+ *
+ * This mirrors the SMP combined IPI handler semantics, but runs locally on UP.
+ */
+#ifndef CONFIG_SMP
+void migrate_flush_tlb_page(struct vm_area_struct *vma,
+					   unsigned long addr)
+{
+	struct mm_struct *mm = vma->vm_mm;
+	int tbi_type = (vma->vm_flags & VM_EXEC) ? 3 : 2;
+
+	/*
+	 * First do the mm-context side:
+	 * If we're currently running this mm, reload a fresh context ASN.
+	 * Otherwise, mark context invalid.
+	 *
+	 * On UP, this is mostly about matching the SMP semantics and ensuring
+	 * exec/i-cache tagging assumptions hold when compaction migrates pages.
+	 */
+	if (mm == current->active_mm)
+		flush_tlb_current(mm);
+	else
+		flush_tlb_other(mm);
+
+	/*
+	 * Then do the immediate translation kill for this VA.
+	 * For exec mappings, order instruction fetch after invalidation.
+	 */
+	tbi(tbi_type, addr);
+}
+
+#else
+struct tlb_mm_and_addr {
+	struct mm_struct *mm;
+	unsigned long addr;
+	int tbi_type;	/* 2 = DTB, 3 = ITB+DTB */
+};
+
+static void ipi_flush_mm_and_page(void *x)
+{
+	struct tlb_mm_and_addr *d = x;
+
+	/* Part 1: mm context side (Alpha uses ASN/context as a key mechanism). */
+	if (d->mm == current->active_mm && !asn_locked())
+		__load_new_mm_context(d->mm);
+	else
+		flush_tlb_other(d->mm);
+
+	/* Part 2: immediate per-VA invalidation on this CPU. */
+	tbi(d->tbi_type, d->addr);
+}
+
+void migrate_flush_tlb_page(struct vm_area_struct *vma, unsigned long addr)
+{
+	struct mm_struct *mm = vma->vm_mm;
+	struct tlb_mm_and_addr d = {
+		.mm = mm,
+		.addr = addr,
+		.tbi_type = (vma->vm_flags & VM_EXEC) ? 3 : 2,
+	};
+
+	/*
+	 * One synchronous rendezvous: every CPU runs ipi_flush_mm_and_page().
+	 * This is the "combined" version of flush_tlb_mm + per-page invalidate.
+	 */
+	preempt_disable();
+	on_each_cpu(ipi_flush_mm_and_page, &d, 1);
+
+	/*
+	 * mimic flush_tlb_mm()'s mm_users<=1 optimization.
+	 */
+	if (atomic_read(&mm->mm_users) <= 1) {
+
+		int cpu, this_cpu;
+		this_cpu = smp_processor_id();
+
+		for (cpu = 0; cpu < NR_CPUS; cpu++) {
+			if (!cpu_online(cpu) || cpu == this_cpu)
+				continue;
+			if (READ_ONCE(mm->context[cpu]))
+				WRITE_ONCE(mm->context[cpu], 0);
+		}
+	}
+	preempt_enable();
+}
+
+#endif
diff --git linux-libre-6.12-gnu/arch/arc/Kconfig linux-libre-6.12.79-gnu/arch/arc/Kconfig
index 5b2488142041..69c6e71fa1e6 100644
--- linux-libre-6.12-gnu/arch/arc/Kconfig
+++ linux-libre-6.12.79-gnu/arch/arc/Kconfig
@@ -297,7 +297,6 @@ config ARC_PAGE_SIZE_16K
 config ARC_PAGE_SIZE_4K
 	bool "4KB"
 	select HAVE_PAGE_SIZE_4KB
-	depends on ARC_MMU_V3 || ARC_MMU_V4
 
 endchoice
 
@@ -474,7 +473,8 @@ config HIGHMEM
 
 config ARC_HAS_PAE40
 	bool "Support for the 40-bit Physical Address Extension"
-	depends on ISA_ARCV2
+	depends on MMU_V4
+	depends on !ARC_PAGE_SIZE_4K
 	select HIGHMEM
 	select PHYS_ADDR_T_64BIT
 	help
diff --git linux-libre-6.12-gnu/arch/arc/Makefile linux-libre-6.12.79-gnu/arch/arc/Makefile
index 2390dd042e36..fb98478ed1ab 100644
--- linux-libre-6.12-gnu/arch/arc/Makefile
+++ linux-libre-6.12.79-gnu/arch/arc/Makefile
@@ -6,7 +6,7 @@
 KBUILD_DEFCONFIG := haps_hs_smp_defconfig
 
 ifeq ($(CROSS_COMPILE),)
-CROSS_COMPILE := $(call cc-cross-prefix, arc-linux- arceb-linux-)
+CROSS_COMPILE := $(call cc-cross-prefix, arc-linux- arceb-linux- arc-linux-gnu-)
 endif
 
 cflags-y	+= -fno-common -pipe -fno-builtin -mmedium-calls -D__linux__
diff --git linux-libre-6.12-gnu/arch/arc/include/asm/bitops.h linux-libre-6.12.79-gnu/arch/arc/include/asm/bitops.h
index f5a936496f06..24981bba974d 100644
--- linux-libre-6.12-gnu/arch/arc/include/asm/bitops.h
+++ linux-libre-6.12.79-gnu/arch/arc/include/asm/bitops.h
@@ -133,6 +133,8 @@ static inline __attribute__ ((const)) int fls(unsigned int x)
  */
 static inline __attribute__ ((const)) unsigned long __fls(unsigned long x)
 {
+	if (__builtin_constant_p(x))
+		return x ? BITS_PER_LONG - 1 - __builtin_clzl(x) : 0;
 	/* FLS insn has exactly same semantics as the API */
 	return	__builtin_arc_fls(x);
 }
diff --git linux-libre-6.12-gnu/arch/arc/include/asm/cmpxchg.h linux-libre-6.12.79-gnu/arch/arc/include/asm/cmpxchg.h
index 58045c898340..76f43db0890f 100644
--- linux-libre-6.12-gnu/arch/arc/include/asm/cmpxchg.h
+++ linux-libre-6.12.79-gnu/arch/arc/include/asm/cmpxchg.h
@@ -48,7 +48,7 @@
 									\
 	switch(sizeof((_p_))) {						\
 	case 1:								\
-		_prev_ = (__typeof__(*(ptr)))cmpxchg_emu_u8((volatile u8 *)_p_, (uintptr_t)_o_, (uintptr_t)_n_);	\
+		_prev_ = (__typeof__(*(ptr)))cmpxchg_emu_u8((volatile u8 *__force)_p_, (uintptr_t)_o_, (uintptr_t)_n_);	\
 		break;							\
 	case 4:								\
 		_prev_ = __cmpxchg(_p_, _o_, _n_);			\
diff --git linux-libre-6.12-gnu/arch/arc/kernel/asm-offsets.c linux-libre-6.12.79-gnu/arch/arc/kernel/asm-offsets.c
index f77deb799175..2978da85fcb6 100644
--- linux-libre-6.12-gnu/arch/arc/kernel/asm-offsets.c
+++ linux-libre-6.12.79-gnu/arch/arc/kernel/asm-offsets.c
@@ -2,6 +2,7 @@
 /*
  * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
  */
+#define COMPILE_OFFSETS
 
 #include <linux/sched.h>
 #include <linux/mm.h>
diff --git linux-libre-6.12-gnu/arch/arc/kernel/devtree.c linux-libre-6.12.79-gnu/arch/arc/kernel/devtree.c
index 4c9e61457b2f..cc6ac7d128aa 100644
--- linux-libre-6.12-gnu/arch/arc/kernel/devtree.c
+++ linux-libre-6.12.79-gnu/arch/arc/kernel/devtree.c
@@ -62,7 +62,7 @@ const struct machine_desc * __init setup_machine_fdt(void *dt)
 	const struct machine_desc *mdesc;
 	unsigned long dt_root;
 
-	if (!early_init_dt_scan(dt))
+	if (!early_init_dt_scan(dt, __pa(dt)))
 		return NULL;
 
 	mdesc = of_flat_dt_match_machine(NULL, arch_get_next_mach);
diff --git linux-libre-6.12-gnu/arch/arc/net/bpf_jit_arcv2.c linux-libre-6.12.79-gnu/arch/arc/net/bpf_jit_arcv2.c
index 4458e409ca0a..6d989b6d88c6 100644
--- linux-libre-6.12-gnu/arch/arc/net/bpf_jit_arcv2.c
+++ linux-libre-6.12.79-gnu/arch/arc/net/bpf_jit_arcv2.c
@@ -2916,7 +2916,7 @@ bool check_jmp_32(u32 curr_off, u32 targ_off, u8 cond)
 	addendum = (cond == ARC_CC_AL) ? 0 : INSN_len_normal;
 	disp = get_displacement(curr_off + addendum, targ_off);
 
-	if (ARC_CC_AL)
+	if (cond == ARC_CC_AL)
 		return is_valid_far_disp(disp);
 	else
 		return is_valid_near_disp(disp);
diff --git linux-libre-6.12-gnu/arch/arm/Kconfig linux-libre-6.12.79-gnu/arch/arm/Kconfig
index 202397be76d8..cc8beccc4e86 100644
--- linux-libre-6.12-gnu/arch/arm/Kconfig
+++ linux-libre-6.12.79-gnu/arch/arm/Kconfig
@@ -118,7 +118,7 @@ config ARM
 	select HAVE_KERNEL_XZ
 	select HAVE_KPROBES if !XIP_KERNEL && !CPU_ENDIAN_BE32 && !CPU_V7M
 	select HAVE_KRETPROBES if HAVE_KPROBES
-	select HAVE_LD_DEAD_CODE_DATA_ELIMINATION if (LD_VERSION >= 23600 || LD_IS_LLD)
+	select HAVE_LD_DEAD_CODE_DATA_ELIMINATION if (LD_VERSION >= 23600 || LD_IS_LLD) && LD_CAN_USE_KEEP_IN_OVERLAY
 	select HAVE_MOD_ARCH_SPECIFIC
 	select HAVE_NMI
 	select HAVE_OPTPROBES if !THUMB2_KERNEL
@@ -1229,7 +1229,7 @@ config HIGHMEM
 
 config HIGHPTE
 	bool "Allocate 2nd-level pagetables from highmem" if EXPERT
-	depends on HIGHMEM
+	depends on HIGHMEM && !PREEMPT_RT
 	default y
 	help
 	  The VM uses one page of physical memory for each page table.
diff --git linux-libre-6.12-gnu/arch/arm/Makefile linux-libre-6.12.79-gnu/arch/arm/Makefile
index aafebf145738..dee8c9fe25a2 100644
--- linux-libre-6.12-gnu/arch/arm/Makefile
+++ linux-libre-6.12.79-gnu/arch/arm/Makefile
@@ -149,7 +149,7 @@ endif
 # Need -Uarm for gcc < 3.x
 KBUILD_CPPFLAGS	+=$(cpp-y)
 KBUILD_CFLAGS	+=$(CFLAGS_ABI) $(CFLAGS_ISA) $(arch-y) $(tune-y) $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -msoft-float -Uarm
-KBUILD_AFLAGS	+=$(CFLAGS_ABI) $(AFLAGS_ISA) -Wa,$(arch-y) $(tune-y) -include asm/unified.h -msoft-float
+KBUILD_AFLAGS	+=$(CFLAGS_ABI) $(AFLAGS_ISA) -Wa,$(arch-y) $(tune-y) -include $(srctree)/arch/arm/include/asm/unified.h -msoft-float
 
 CHECKFLAGS	+= -D__arm__
 
diff --git linux-libre-6.12-gnu/arch/arm/boot/dts/allwinner/sun5i-a13-utoo-p66.dts linux-libre-6.12.79-gnu/arch/arm/boot/dts/allwinner/sun5i-a13-utoo-p66.dts
index be486d28d04f..428cab5a0e90 100644
--- linux-libre-6.12-gnu/arch/arm/boot/dts/allwinner/sun5i-a13-utoo-p66.dts
+++ linux-libre-6.12.79-gnu/arch/arm/boot/dts/allwinner/sun5i-a13-utoo-p66.dts
@@ -102,6 +102,7 @@
 	/* The P66 uses a different EINT then the reference design */
 	interrupts = <6 9 IRQ_TYPE_EDGE_FALLING>; /* EINT9 (PG9) */
 	/* The icn8318 binding expects wake-gpios instead of power-gpios */
+	/delete-property/ power-gpios;
 	wake-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
 	touchscreen-size-x = <800>;
 	touchscreen-size-y = <480>;
diff --git linux-libre-6.12-gnu/arch/arm/boot/dts/allwinner/sun9i-a80-cubieboard4.dts linux-libre-6.12.79-gnu/arch/arm/boot/dts/allwinner/sun9i-a80-cubieboard4.dts
index c8ca8cb7f5c9..52ad95a2063a 100644
--- linux-libre-6.12-gnu/arch/arm/boot/dts/allwinner/sun9i-a80-cubieboard4.dts
+++ linux-libre-6.12.79-gnu/arch/arm/boot/dts/allwinner/sun9i-a80-cubieboard4.dts
@@ -280,8 +280,8 @@
 
 			reg_dcdc5: dcdc5 {
 				regulator-always-on;
-				regulator-min-microvolt = <1425000>;
-				regulator-max-microvolt = <1575000>;
+				regulator-min-microvolt = <1450000>;
+				regulator-max-microvolt = <1550000>;
 				regulator-name = "vcc-dram";
 			};
 
diff --git linux-libre-6.12-gnu/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts linux-libre-6.12.79-gnu/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
index 98477792aa00..14d175103106 100644
--- linux-libre-6.12-gnu/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
+++ linux-libre-6.12.79-gnu/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
@@ -284,12 +284,12 @@
 &i2c11 {
 	status = "okay";
 	power-sensor@10 {
-		compatible = "adi, adm1272";
+		compatible = "adi,adm1272";
 		reg = <0x10>;
 	};
 
 	power-sensor@12 {
-		compatible = "adi, adm1272";
+		compatible = "adi,adm1272";
 		reg = <0x12>;
 	};
 
@@ -461,22 +461,20 @@
 			};
 
 			pwm@20{
-				compatible = "max31790";
+				compatible = "maxim,max31790";
 				reg = <0x20>;
-				#address-cells = <1>;
-				#size-cells = <0>;
 			};
 
 			gpio@22{
 				compatible = "ti,tca6424";
 				reg = <0x22>;
+				gpio-controller;
+				#gpio-cells = <2>;
 			};
 
 			pwm@23{
-				compatible = "max31790";
+				compatible = "maxim,max31790";
 				reg = <0x23>;
-				#address-cells = <1>;
-				#size-cells = <0>;
 			};
 
 			adc@33 {
@@ -511,22 +509,20 @@
 			};
 
 			pwm@20{
-				compatible = "max31790";
+				compatible = "maxim,max31790";
 				reg = <0x20>;
-				#address-cells = <1>;
-				#size-cells = <0>;
 			};
 
 			gpio@22{
 				compatible = "ti,tca6424";
 				reg = <0x22>;
+				gpio-controller;
+				#gpio-cells = <2>;
 			};
 
 			pwm@23{
-				compatible = "max31790";
+				compatible = "maxim,max31790";
 				reg = <0x23>;
-				#address-cells = <1>;
-				#size-cells = <0>;
 			};
 
 			adc@33 {
diff --git linux-libre-6.12-gnu/arch/arm/boot/dts/broadcom/bcm2711-rpi.dtsi linux-libre-6.12.79-gnu/arch/arm/boot/dts/broadcom/bcm2711-rpi.dtsi
index 6bf4241fe3b7..c78ed064d166 100644
--- linux-libre-6.12-gnu/arch/arm/boot/dts/broadcom/bcm2711-rpi.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm/boot/dts/broadcom/bcm2711-rpi.dtsi
@@ -1,7 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "bcm2835-rpi.dtsi"
 
-#include <dt-bindings/power/raspberrypi-power.h>
 #include <dt-bindings/reset/raspberrypi,firmware-reset.h>
 
 / {
@@ -101,7 +100,3 @@
 &vchiq {
 	interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 };
-
-&xhci {
-	power-domains = <&power RPI_POWER_DOMAIN_USB>;
-};
diff --git linux-libre-6.12-gnu/arch/arm/boot/dts/broadcom/bcm2711.dtsi linux-libre-6.12.79-gnu/arch/arm/boot/dts/broadcom/bcm2711.dtsi
index e4e42af21ef3..c06d9f5e53c8 100644
--- linux-libre-6.12-gnu/arch/arm/boot/dts/broadcom/bcm2711.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm/boot/dts/broadcom/bcm2711.dtsi
@@ -134,7 +134,7 @@
 			clocks = <&clocks BCM2835_CLOCK_UART>,
 				 <&clocks BCM2835_CLOCK_VPU>;
 			clock-names = "uartclk", "apb_pclk";
-			arm,primecell-periphid = <0x00241011>;
+			arm,primecell-periphid = <0x00341011>;
 			status = "disabled";
 		};
 
@@ -145,7 +145,7 @@
 			clocks = <&clocks BCM2835_CLOCK_UART>,
 				 <&clocks BCM2835_CLOCK_VPU>;
 			clock-names = "uartclk", "apb_pclk";
-			arm,primecell-periphid = <0x00241011>;
+			arm,primecell-periphid = <0x00341011>;
 			status = "disabled";
 		};
 
@@ -156,7 +156,7 @@
 			clocks = <&clocks BCM2835_CLOCK_UART>,
 				 <&clocks BCM2835_CLOCK_VPU>;
 			clock-names = "uartclk", "apb_pclk";
-			arm,primecell-periphid = <0x00241011>;
+			arm,primecell-periphid = <0x00341011>;
 			status = "disabled";
 		};
 
@@ -167,7 +167,7 @@
 			clocks = <&clocks BCM2835_CLOCK_UART>,
 				 <&clocks BCM2835_CLOCK_VPU>;
 			clock-names = "uartclk", "apb_pclk";
-			arm,primecell-periphid = <0x00241011>;
+			arm,primecell-periphid = <0x00341011>;
 			status = "disabled";
 		};
 
@@ -451,8 +451,6 @@
 					  IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) |
 					  IRQ_TYPE_LEVEL_LOW)>;
-		/* This only applies to the ARMv7 stub */
-		arm,cpu-registers-not-fw-configured;
 	};
 
 	cpus: cpus {
@@ -610,6 +608,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&pm BCM2835_POWER_DOMAIN_USB>;
 			/* DWC2 and this IP block share the same USB PHY,
 			 * enabling both at the same time results in lockups.
 			 * So keep this node disabled and let the bootloader
@@ -1177,6 +1176,7 @@
 };
 
 &uart0 {
+	arm,primecell-periphid = <0x00341011>;
 	interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
 };
 
diff --git linux-libre-6.12-gnu/arch/arm/boot/dts/broadcom/bcm4709-asus-rt-ac3200.dts linux-libre-6.12.79-gnu/arch/arm/boot/dts/broadcom/bcm4709-asus-rt-ac3200.dts
index 53cb0c58f6d0..3da2daee0c84 100644
--- linux-libre-6.12-gnu/arch/arm/boot/dts/broadcom/bcm4709-asus-rt-ac3200.dts
+++ linux-libre-6.12.79-gnu/arch/arm/boot/dts/broadcom/bcm4709-asus-rt-ac3200.dts
@@ -124,19 +124,19 @@
 		};
 
 		port@1 {
-			label = "lan1";
+			label = "lan4";
 		};
 
 		port@2 {
-			label = "lan2";
+			label = "lan3";
 		};
 
 		port@3 {
-			label = "lan3";
+			label = "lan2";
 		};
 
 		port@4 {
-			label = "lan4";
+			label = "lan1";
 		};
 	};
 };
diff --git linux-libre-6.12-gnu/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac5300.dts linux-libre-6.12.79-gnu/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac5300.dts
index 6c666dc7ad23..01ec8c03686a 100644
--- linux-libre-6.12-gnu/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac5300.dts
+++ linux-libre-6.12.79-gnu/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac5300.dts
@@ -126,11 +126,11 @@
 
 	ports {
 		port@0 {
-			label = "lan4";
+			label = "wan";
 		};
 
 		port@1 {
-			label = "lan3";
+			label = "lan1";
 		};
 
 		port@2 {
@@ -138,11 +138,11 @@
 		};
 
 		port@3 {
-			label = "lan1";
+			label = "lan3";
 		};
 
 		port@4 {
-			label = "wan";
+			label = "lan4";
 		};
 	};
 };
diff --git linux-libre-6.12-gnu/arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-1440.dts linux-libre-6.12.79-gnu/arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-1440.dts
index ac44c745bdf8..a39a021a3910 100644
--- linux-libre-6.12-gnu/arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-1440.dts
+++ linux-libre-6.12.79-gnu/arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-1440.dts
@@ -55,8 +55,8 @@
 	mdio {
 		/delete-node/ switch@1e;
 
-		bcm54210e: ethernet-phy@0 {
-			reg = <0>;
+		bcm54210e: ethernet-phy@25 {
+			reg = <25>;
 		};
 	};
 };
diff --git linux-libre-6.12-gnu/arch/arm/boot/dts/intel/socfpga/socfpga_arria10.dtsi linux-libre-6.12.79-gnu/arch/arm/boot/dts/intel/socfpga/socfpga_arria10.dtsi
index 6b6e77596ffa..b108265e9bde 100644
--- linux-libre-6.12-gnu/arch/arm/boot/dts/intel/socfpga/socfpga_arria10.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm/boot/dts/intel/socfpga/socfpga_arria10.dtsi
@@ -440,7 +440,7 @@
 			clocks = <&l4_mp_clk>, <&peri_emac_ptp_clk>;
 			clock-names = "stmmaceth", "ptp_ref";
 			resets = <&rst EMAC0_RESET>, <&rst EMAC0_OCP_RESET>;
-			reset-names = "stmmaceth", "ahb";
+			reset-names = "stmmaceth", "stmmaceth-ocp";
 			snps,axi-config = <&socfpga_axi_setup>;
 			status = "disabled";
 		};
@@ -460,7 +460,7 @@
 			clocks = <&l4_mp_clk>, <&peri_emac_ptp_clk>;
 			clock-names = "stmmaceth", "ptp_ref";
 			resets = <&rst EMAC1_RESET>, <&rst EMAC1_OCP_RESET>;
-			reset-names = "stmmaceth", "ahb";
+			reset-names = "stmmaceth", "stmmaceth-ocp";
 			snps,axi-config = <&socfpga_axi_setup>;
 			status = "disabled";
 		};
@@ -480,7 +480,7 @@
 			clocks = <&l4_mp_clk>, <&peri_emac_ptp_clk>;
 			clock-names = "stmmaceth", "ptp_ref";
 			resets = <&rst EMAC2_RESET>, <&rst EMAC2_OCP_RESET>;
-			reset-names = "stmmaceth", "ahb";
+			reset-names = "stmmaceth", "stmmaceth-ocp";
 			snps,axi-config = <&socfpga_axi_setup>;
 			status = "disabled";
 		};
diff --git linux-libre-6.12-gnu/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sodia.dts linux-libre-6.12.79-gnu/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sodia.dts
index ce0d6514eeb5..e4794ccb8e41 100644
--- linux-libre-6.12-gnu/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sodia.dts
+++ linux-libre-6.12.79-gnu/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sodia.dts
@@ -66,8 +66,10 @@
 	mdio0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		phy0: ethernet-phy@0 {
-			reg = <0>;
+		compatible = "snps,dwmac-mdio";
+
+		phy0: ethernet-phy@4 {
+			reg = <4>;
 			rxd0-skew-ps = <0>;
 			rxd1-skew-ps = <0>;
 			rxd2-skew-ps = <0>;
diff --git linux-libre-6.12-gnu/arch/arm/boot/dts/marvell/kirkwood-openrd-client.dts linux-libre-6.12.79-gnu/arch/arm/boot/dts/marvell/kirkwood-openrd-client.dts
index d4e0b8150a84..cf26e2ceaaa0 100644
--- linux-libre-6.12-gnu/arch/arm/boot/dts/marvell/kirkwood-openrd-client.dts
+++ linux-libre-6.12.79-gnu/arch/arm/boot/dts/marvell/kirkwood-openrd-client.dts
@@ -38,7 +38,7 @@
 		simple-audio-card,mclk-fs = <256>;
 
 		simple-audio-card,cpu {
-			sound-dai = <&audio0 0>;
+			sound-dai = <&audio0>;
 		};
 
 		simple-audio-card,codec {
diff --git linux-libre-6.12-gnu/arch/arm/boot/dts/mediatek/mt7623.dtsi linux-libre-6.12.79-gnu/arch/arm/boot/dts/mediatek/mt7623.dtsi
index 814586abc297..fd7a89cc337d 100644
--- linux-libre-6.12-gnu/arch/arm/boot/dts/mediatek/mt7623.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm/boot/dts/mediatek/mt7623.dtsi
@@ -308,7 +308,7 @@
 		clock-names = "spi", "wrap";
 	};
 
-	cir: cir@10013000 {
+	cir: ir-receiver@10013000 {
 		compatible = "mediatek,mt7623-cir";
 		reg = <0 0x10013000 0 0x1000>;
 		interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_LOW>;
diff --git linux-libre-6.12-gnu/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts linux-libre-6.12.79-gnu/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts
index 15239834d886..35a933eec573 100644
--- linux-libre-6.12-gnu/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts
+++ linux-libre-6.12.79-gnu/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts
@@ -197,6 +197,7 @@
 
 &sdmmc0 {
 	bus-width = <4>;
+	no-1-8-v;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_sdmmc0_default>;
 	status = "okay";
diff --git linux-libre-6.12-gnu/arch/arm/boot/dts/microchip/at91-sama5d29_curiosity.dts linux-libre-6.12.79-gnu/arch/arm/boot/dts/microchip/at91-sama5d29_curiosity.dts
index 951a0c97d3c6..5933840bb8f7 100644
--- linux-libre-6.12-gnu/arch/arm/boot/dts/microchip/at91-sama5d29_curiosity.dts
+++ linux-libre-6.12.79-gnu/arch/arm/boot/dts/microchip/at91-sama5d29_curiosity.dts
@@ -514,6 +514,7 @@
 
 &sdmmc0 {
 	bus-width = <4>;
+	no-1-8-v;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_sdmmc0_default>;
 	disable-wp;
diff --git linux-libre-6.12-gnu/arch/arm/boot/dts/microchip/at91sam9263ek.dts linux-libre-6.12.79-gnu/arch/arm/boot/dts/microchip/at91sam9263ek.dts
index ce8baff6a9f4..e42e1a75a715 100644
--- linux-libre-6.12-gnu/arch/arm/boot/dts/microchip/at91sam9263ek.dts
+++ linux-libre-6.12.79-gnu/arch/arm/boot/dts/microchip/at91sam9263ek.dts
@@ -152,7 +152,7 @@
 				nand@3 {
 					reg = <0x3 0x0 0x800000>;
 					rb-gpios = <&pioA 22 GPIO_ACTIVE_HIGH>;
-					cs-gpios = <&pioA 15 GPIO_ACTIVE_HIGH>;
+					cs-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>;
 					nand-bus-width = <8>;
 					nand-ecc-mode = "soft";
 					nand-on-flash-bbt;
diff --git linux-libre-6.12-gnu/arch/arm/boot/dts/microchip/sam9x60.dtsi linux-libre-6.12.79-gnu/arch/arm/boot/dts/microchip/sam9x60.dtsi
index 04a6d716ecaf..1e8fcb5d4700 100644
--- linux-libre-6.12-gnu/arch/arm/boot/dts/microchip/sam9x60.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm/boot/dts/microchip/sam9x60.dtsi
@@ -186,6 +186,7 @@
 					dma-names = "tx", "rx";
 					clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
 					clock-names = "usart";
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 					atmel,use-dma-rx;
 					atmel,use-dma-tx;
 					atmel,fifo-size = <16>;
@@ -388,6 +389,7 @@
 					dma-names = "tx", "rx";
 					clocks = <&pmc PMC_TYPE_PERIPHERAL 32>;
 					clock-names = "usart";
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 					atmel,use-dma-rx;
 					atmel,use-dma-tx;
 					atmel,fifo-size = <16>;
@@ -439,6 +441,7 @@
 					dma-names = "tx", "rx";
 					clocks = <&pmc PMC_TYPE_PERIPHERAL 33>;
 					clock-names = "usart";
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 					atmel,use-dma-rx;
 					atmel,use-dma-tx;
 					atmel,fifo-size = <16>;
@@ -598,6 +601,7 @@
 					dma-names = "tx", "rx";
 					clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
 					clock-names = "usart";
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 					atmel,use-dma-rx;
 					atmel,use-dma-tx;
 					atmel,fifo-size = <16>;
@@ -649,6 +653,7 @@
 					dma-names = "tx", "rx";
 					clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
 					clock-names = "usart";
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 					atmel,use-dma-rx;
 					atmel,use-dma-tx;
 					atmel,fifo-size = <16>;
@@ -700,6 +705,7 @@
 					dma-names = "tx", "rx";
 					clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
 					clock-names = "usart";
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 					atmel,use-dma-rx;
 					atmel,use-dma-tx;
 					atmel,fifo-size = <16>;
@@ -751,6 +757,7 @@
 					dma-names = "tx", "rx";
 					clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
 					clock-names = "usart";
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 					atmel,use-dma-rx;
 					atmel,use-dma-tx;
 					atmel,fifo-size = <16>;
@@ -821,6 +828,7 @@
 					dma-names = "tx", "rx";
 					clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
 					clock-names = "usart";
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 					atmel,use-dma-rx;
 					atmel,use-dma-tx;
 					atmel,fifo-size = <16>;
@@ -891,6 +899,7 @@
 					dma-names = "tx", "rx";
 					clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
 					clock-names = "usart";
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 					atmel,use-dma-rx;
 					atmel,use-dma-tx;
 					atmel,fifo-size = <16>;
@@ -961,6 +970,7 @@
 					dma-names = "tx", "rx";
 					clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
 					clock-names = "usart";
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 					atmel,use-dma-rx;
 					atmel,use-dma-tx;
 					atmel,fifo-size = <16>;
@@ -1086,6 +1096,7 @@
 					dma-names = "tx", "rx";
 					clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
 					clock-names = "usart";
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 					atmel,use-dma-rx;
 					atmel,use-dma-tx;
 					atmel,fifo-size = <16>;
@@ -1137,6 +1148,7 @@
 					dma-names = "tx", "rx";
 					clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
 					clock-names = "usart";
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 					atmel,use-dma-rx;
 					atmel,use-dma-tx;
 					atmel,fifo-size = <16>;
diff --git linux-libre-6.12-gnu/arch/arm/boot/dts/microchip/sama5d2.dtsi linux-libre-6.12.79-gnu/arch/arm/boot/dts/microchip/sama5d2.dtsi
index 5f8e297e19ed..92ee26fec8b4 100644
--- linux-libre-6.12-gnu/arch/arm/boot/dts/microchip/sama5d2.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm/boot/dts/microchip/sama5d2.dtsi
@@ -568,7 +568,7 @@
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(12))>;
 					dma-names = "tx", "rx";
-					atmel,fifo-size = <16>;
+					atmel,fifo-size = <32>;
 					status = "disabled";
 				};
 
@@ -639,7 +639,7 @@
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(14))>;
 					dma-names = "tx", "rx";
-					atmel,fifo-size = <16>;
+					atmel,fifo-size = <32>;
 					status = "disabled";
 				};
 
@@ -851,7 +851,7 @@
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(16))>;
 					dma-names = "tx", "rx";
-					atmel,fifo-size = <16>;
+					atmel,fifo-size = <32>;
 					status = "disabled";
 				};
 
@@ -922,7 +922,7 @@
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(18))>;
 					dma-names = "tx", "rx";
-					atmel,fifo-size = <16>;
+					atmel,fifo-size = <32>;
 					status = "disabled";
 				};
 
@@ -994,7 +994,7 @@
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(20))>;
 					dma-names = "tx", "rx";
-					atmel,fifo-size = <16>;
+					atmel,fifo-size = <32>;
 					status = "disabled";
 				};
 
diff --git linux-libre-6.12-gnu/arch/arm/boot/dts/microchip/sama7g5.dtsi linux-libre-6.12.79-gnu/arch/arm/boot/dts/microchip/sama7g5.dtsi
index 17bcdcf0cf4a..086e1d402421 100644
--- linux-libre-6.12-gnu/arch/arm/boot/dts/microchip/sama7g5.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm/boot/dts/microchip/sama7g5.dtsi
@@ -811,7 +811,7 @@
 				dma-names = "tx", "rx";
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
-				atmel,fifo-size = <16>;
+				atmel,fifo-size = <32>;
 				status = "disabled";
 			};
 		};
@@ -837,7 +837,7 @@
 				dma-names = "tx", "rx";
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
-				atmel,fifo-size = <16>;
+				atmel,fifo-size = <32>;
 				status = "disabled";
 			};
 		};
diff --git linux-libre-6.12-gnu/arch/arm/boot/dts/microchip/tny_a9263.dts linux-libre-6.12.79-gnu/arch/arm/boot/dts/microchip/tny_a9263.dts
index 62b7d9f9a926..c8b6318aaa83 100644
--- linux-libre-6.12-gnu/arch/arm/boot/dts/microchip/tny_a9263.dts
+++ linux-libre-6.12.79-gnu/arch/arm/boot/dts/microchip/tny_a9263.dts
@@ -64,7 +64,7 @@
 				nand@3 {
 					reg = <0x3 0x0 0x800000>;
 					rb-gpios = <&pioA 22 GPIO_ACTIVE_HIGH>;
-					cs-gpios = <&pioA 15 GPIO_ACTIVE_HIGH>;
+					cs-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>;
 					nand-bus-width = <8>;
 					nand-ecc-mode = "soft";
 					nand-on-flash-bbt;
diff --git linux-libre-6.12-gnu/arch/arm/boot/dts/microchip/usb_a9263.dts linux-libre-6.12.79-gnu/arch/arm/boot/dts/microchip/usb_a9263.dts
index 45745915b2e1..454176ce6d3f 100644
--- linux-libre-6.12-gnu/arch/arm/boot/dts/microchip/usb_a9263.dts
+++ linux-libre-6.12.79-gnu/arch/arm/boot/dts/microchip/usb_a9263.dts
@@ -58,7 +58,7 @@
 			};
 
 			spi0: spi@fffa4000 {
-				cs-gpios = <&pioB 15 GPIO_ACTIVE_HIGH>;
+				cs-gpios = <&pioA 5 GPIO_ACTIVE_LOW>;
 				status = "okay";
 				flash@0 {
 					compatible = "atmel,at45", "atmel,dataflash";
@@ -84,7 +84,7 @@
 				nand@3 {
 					reg = <0x3 0x0 0x800000>;
 					rb-gpios = <&pioA 22 GPIO_ACTIVE_HIGH>;
-					cs-gpios = <&pioA 15 GPIO_ACTIVE_HIGH>;
+					cs-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>;
 					nand-bus-width = <8>;
 					nand-ecc-mode = "soft";
 					nand-on-flash-bbt;
diff --git linux-libre-6.12-gnu/arch/arm/boot/dts/nvidia/tegra114.dtsi linux-libre-6.12.79-gnu/arch/arm/boot/dts/nvidia/tegra114.dtsi
index 86f14e2fd29f..6c057b506951 100644
--- linux-libre-6.12-gnu/arch/arm/boot/dts/nvidia/tegra114.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm/boot/dts/nvidia/tegra114.dtsi
@@ -139,7 +139,7 @@
 			reg = <0x54400000 0x00040000>;
 			clocks = <&tegra_car TEGRA114_CLK_DSIB>,
 				 <&tegra_car TEGRA114_CLK_DSIBLP>,
-				 <&tegra_car TEGRA114_CLK_PLL_D2_OUT0>;
+				 <&tegra_car TEGRA114_CLK_PLL_D_OUT0>;
 			clock-names = "dsi", "lp", "parent";
 			resets = <&tegra_car 82>;
 			reset-names = "dsi";
diff --git linux-libre-6.12-gnu/arch/arm/boot/dts/nvidia/tegra20-asus-tf101.dts linux-libre-6.12.79-gnu/arch/arm/boot/dts/nvidia/tegra20-asus-tf101.dts
index e118809dc6d9..f0e7284fa7c3 100644
--- linux-libre-6.12-gnu/arch/arm/boot/dts/nvidia/tegra20-asus-tf101.dts
+++ linux-libre-6.12.79-gnu/arch/arm/boot/dts/nvidia/tegra20-asus-tf101.dts
@@ -502,6 +502,9 @@
 			compatible = "asahi-kasei,ak8974";
 			reg = <0xe>;
 
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(N, 5) IRQ_TYPE_EDGE_RISING>;
+
 			avdd-supply = <&vdd_3v3_sys>;
 			dvdd-supply = <&vdd_1v8_sys>;
 
@@ -515,7 +518,7 @@
 			reg = <0x1a>;
 
 			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(X, 1) IRQ_TYPE_EDGE_BOTH>;
+			interrupts = <TEGRA_GPIO(X, 3) IRQ_TYPE_EDGE_BOTH>;
 
 			gpio-controller;
 			#gpio-cells = <2>;
diff --git linux-libre-6.12-gnu/arch/arm/boot/dts/nvidia/tegra30-lg-p880.dts linux-libre-6.12.79-gnu/arch/arm/boot/dts/nvidia/tegra30-lg-p880.dts
index 2f7754fd42a1..c6ef0a20c19f 100644
--- linux-libre-6.12-gnu/arch/arm/boot/dts/nvidia/tegra30-lg-p880.dts
+++ linux-libre-6.12.79-gnu/arch/arm/boot/dts/nvidia/tegra30-lg-p880.dts
@@ -108,8 +108,8 @@
 	i2c@7000c400 {
 		touchscreen@20 {
 			rmi4-f11@11 {
-				syna,clip-x-high = <1110>;
-				syna,clip-y-high = <1973>;
+				syna,clip-x-high = <1440>;
+				syna,clip-y-high = <2560>;
 
 				touchscreen-inverted-y;
 			};
diff --git linux-libre-6.12-gnu/arch/arm/boot/dts/nxp/imx/imx51-zii-rdu1.dts linux-libre-6.12.79-gnu/arch/arm/boot/dts/nxp/imx/imx51-zii-rdu1.dts
index 7cd17b43b4b2..33b0a427ed5c 100644
--- linux-libre-6.12-gnu/arch/arm/boot/dts/nxp/imx/imx51-zii-rdu1.dts
+++ linux-libre-6.12.79-gnu/arch/arm/boot/dts/nxp/imx/imx51-zii-rdu1.dts
@@ -259,7 +259,7 @@
 	pinctrl-0 = <&pinctrl_audmux>;
 	status = "okay";
 
-	ssi2 {
+	mux-ssi2 {
 		fsl,audmux-port = <1>;
 		fsl,port-config = <
 			(IMX_AUDMUX_V2_PTCR_SYN |
@@ -271,7 +271,7 @@
 		>;
 	};
 
-	aud3 {
+	mux-aud3 {
 		fsl,audmux-port = <2>;
 		fsl,port-config = <
 			IMX_AUDMUX_V2_PTCR_SYN
diff --git linux-libre-6.12-gnu/arch/arm/boot/dts/nxp/imx/imx6q-ba16.dtsi linux-libre-6.12.79-gnu/arch/arm/boot/dts/nxp/imx/imx6q-ba16.dtsi
index 09d9ca0cb332..0f28b140ec81 100644
--- linux-libre-6.12-gnu/arch/arm/boot/dts/nxp/imx/imx6q-ba16.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm/boot/dts/nxp/imx/imx6q-ba16.dtsi
@@ -335,7 +335,7 @@
 		pinctrl-0 = <&pinctrl_rtc>;
 		reg = <0x32>;
 		interrupt-parent = <&gpio4>;
-		interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
 	};
 };
 
diff --git linux-libre-6.12-gnu/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi linux-libre-6.12.79-gnu/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi
index edf55760a5c1..1a63a6add439 100644
--- linux-libre-6.12-gnu/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi
@@ -108,6 +108,11 @@
 		};
 	};
 
+	poweroff {
+		compatible = "regulator-poweroff";
+		cpu-supply = <&vgen2_reg>;
+	};
+
 	reg_module_3v3: regulator-module-3v3 {
 		compatible = "regulator-fixed";
 		regulator-always-on;
@@ -236,10 +241,6 @@
 	status = "disabled";
 };
 
-&clks {
-	fsl,pmic-stby-poweroff;
-};
-
 /* Apalis SPI1 */
 &ecspi1 {
 	cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>;
@@ -527,7 +528,6 @@
 
 	pmic: pmic@8 {
 		compatible = "fsl,pfuze100";
-		fsl,pmic-stby-poweroff;
 		reg = <0x08>;
 
 		regulators {
diff --git linux-libre-6.12-gnu/arch/arm/boot/dts/nxp/imx/imx6ul-imx6ull-opos6ul.dtsi linux-libre-6.12.79-gnu/arch/arm/boot/dts/nxp/imx/imx6ul-imx6ull-opos6ul.dtsi
index f2386dcb9ff2..dda4fa91b2f2 100644
--- linux-libre-6.12-gnu/arch/arm/boot/dts/nxp/imx/imx6ul-imx6ull-opos6ul.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm/boot/dts/nxp/imx/imx6ul-imx6ull-opos6ul.dtsi
@@ -40,6 +40,9 @@
 			reg = <1>;
 			interrupt-parent = <&gpio4>;
 			interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+			micrel,led-mode = <1>;
+			clocks = <&clks IMX6UL_CLK_ENET_REF>;
+			clock-names = "rmii-ref";
 			status = "okay";
 		};
 	};
diff --git linux-libre-6.12-gnu/arch/arm/boot/dts/nxp/imx/imx6ul-kontron-bl-common.dtsi linux-libre-6.12.79-gnu/arch/arm/boot/dts/nxp/imx/imx6ul-kontron-bl-common.dtsi
index 29d2f86d5e34..f4c45e964daf 100644
--- linux-libre-6.12-gnu/arch/arm/boot/dts/nxp/imx/imx6ul-kontron-bl-common.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm/boot/dts/nxp/imx/imx6ul-kontron-bl-common.dtsi
@@ -168,7 +168,6 @@
 	pinctrl-0 = <&pinctrl_uart2>;
 	linux,rs485-enabled-at-boot-time;
 	rs485-rx-during-tx;
-	rs485-rts-active-low;
 	uart-has-rtscts;
 	status = "okay";
 };
diff --git linux-libre-6.12-gnu/arch/arm/boot/dts/nxp/imx/imx6ul.dtsi linux-libre-6.12.79-gnu/arch/arm/boot/dts/nxp/imx/imx6ul.dtsi
index df237e57e2d5..661a792d8a01 100644
--- linux-libre-6.12-gnu/arch/arm/boot/dts/nxp/imx/imx6ul.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm/boot/dts/nxp/imx/imx6ul.dtsi
@@ -333,7 +333,7 @@
 					#sound-dai-cells = <0>;
 					compatible = "fsl,imx6ul-sai", "fsl,imx6sx-sai";
 					reg = <0x02030000 0x4000>;
-					interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clks IMX6UL_CLK_SAI3_IPG>,
 						 <&clks IMX6UL_CLK_SAI3>,
 						 <&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_DUMMY>;
diff --git linux-libre-6.12-gnu/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi linux-libre-6.12.79-gnu/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi
index 028961eb7108..91ca23a66bf3 100644
--- linux-libre-6.12-gnu/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi
@@ -135,6 +135,7 @@
 	lm75a: temperature-sensor@48 {
 		compatible = "national,lm75a";
 		reg = <0x48>;
+		vs-supply = <&vgen4_reg>;
 	};
 
 	/* NXP SE97BTP with temperature sensor + eeprom, TQMa7x 02xx */
diff --git linux-libre-6.12-gnu/arch/arm/boot/dts/nxp/imx/imxrt1050.dtsi linux-libre-6.12.79-gnu/arch/arm/boot/dts/nxp/imx/imxrt1050.dtsi
index dd714d235d5f..b0bad0d1ba36 100644
--- linux-libre-6.12-gnu/arch/arm/boot/dts/nxp/imx/imxrt1050.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm/boot/dts/nxp/imx/imxrt1050.dtsi
@@ -87,7 +87,7 @@
 			reg = <0x402c0000 0x4000>;
 			interrupts = <110>;
 			clocks = <&clks IMXRT1050_CLK_IPG_PDOF>,
-				<&clks IMXRT1050_CLK_OSC>,
+				<&clks IMXRT1050_CLK_AHB_PODF>,
 				<&clks IMXRT1050_CLK_USDHC1>;
 			clock-names = "ipg", "ahb", "per";
 			bus-width = <4>;
diff --git linux-libre-6.12-gnu/arch/arm/boot/dts/nxp/lpc/lpc32xx.dtsi linux-libre-6.12.79-gnu/arch/arm/boot/dts/nxp/lpc/lpc32xx.dtsi
index 974410918f35..7503074d2877 100644
--- linux-libre-6.12-gnu/arch/arm/boot/dts/nxp/lpc/lpc32xx.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm/boot/dts/nxp/lpc/lpc32xx.dtsi
@@ -301,8 +301,9 @@
 			mpwm: mpwm@400e8000 {
 				compatible = "nxp,lpc3220-motor-pwm";
 				reg = <0x400e8000 0x78>;
+				clocks = <&clk LPC32XX_CLK_MCPWM>;
+				#pwm-cells = <3>;
 				status = "disabled";
-				#pwm-cells = <2>;
 			};
 		};
 
diff --git linux-libre-6.12-gnu/arch/arm/boot/dts/nxp/vf/vfxxx.dtsi linux-libre-6.12.79-gnu/arch/arm/boot/dts/nxp/vf/vfxxx.dtsi
index acccf9a3c898..27422a343f14 100644
--- linux-libre-6.12-gnu/arch/arm/boot/dts/nxp/vf/vfxxx.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm/boot/dts/nxp/vf/vfxxx.dtsi
@@ -604,7 +604,7 @@
 
 			ftm: ftm@400b8000 {
 				compatible = "fsl,ftm-timer";
-				reg = <0x400b8000 0x1000 0x400b9000 0x1000>;
+				reg = <0x400b8000 0x1000>, <0x400b9000 0x1000>;
 				interrupts = <44 IRQ_TYPE_LEVEL_HIGH>;
 				clock-names = "ftm-evt", "ftm-src",
 					"ftm-evt-counter-en", "ftm-src-counter-en";
diff --git linux-libre-6.12-gnu/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi linux-libre-6.12.79-gnu/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
index ac7494ed633e..be87c396f05f 100644
--- linux-libre-6.12-gnu/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
@@ -213,12 +213,6 @@
 		};
 	};
 
-	sfpb_mutex: hwmutex {
-		compatible = "qcom,sfpb-mutex";
-		syscon = <&sfpb_wrapper_mutex 0x604 0x4>;
-		#hwlock-cells = <1>;
-	};
-
 	smem {
 		compatible = "qcom,smem";
 		memory-region = <&smem_region>;
@@ -284,6 +278,40 @@
 		};
 	};
 
+	replicator {
+		compatible = "arm,coresight-static-replicator";
+
+		clocks = <&rpmcc RPM_QDSS_CLK>;
+		clock-names = "apb_pclk";
+
+		in-ports {
+			port {
+				replicator_in: endpoint {
+					remote-endpoint = <&funnel_out>;
+				};
+			};
+		};
+
+		out-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				replicator_out0: endpoint {
+					remote-endpoint = <&etb_in>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				replicator_out1: endpoint {
+					remote-endpoint = <&tpiu_in>;
+				};
+			};
+		};
+	};
+
 	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -305,9 +333,10 @@
 			pinctrl-0 = <&ps_hold_default_state>;
 		};
 
-		sfpb_wrapper_mutex: syscon@1200000 {
-			compatible = "syscon";
-			reg = <0x01200000 0x8000>;
+		sfpb_mutex: hwmutex@1200600 {
+			compatible = "qcom,sfpb-mutex";
+			reg = <0x01200600 0x100>;
+			#hwlock-cells = <1>;
 		};
 
 		intc: interrupt-controller@2000000 {
@@ -326,6 +355,8 @@
 				     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>;
 			reg = <0x0200a000 0x100>;
 			clock-frequency = <27000000>;
+			clocks = <&sleep_clk>;
+			clock-names = "sleep";
 			cpu-offset = <0x80000>;
 		};
 
@@ -1532,39 +1563,6 @@
 			};
 		};
 
-		replicator {
-			compatible = "arm,coresight-static-replicator";
-
-			clocks = <&rpmcc RPM_QDSS_CLK>;
-			clock-names = "apb_pclk";
-
-			out-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					replicator_out0: endpoint {
-						remote-endpoint = <&etb_in>;
-					};
-				};
-				port@1 {
-					reg = <1>;
-					replicator_out1: endpoint {
-						remote-endpoint = <&tpiu_in>;
-					};
-				};
-			};
-
-			in-ports {
-				port {
-					replicator_in: endpoint {
-						remote-endpoint = <&funnel_out>;
-					};
-				};
-			};
-		};
-
 		funnel@1a04000 {
 			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
 			reg = <0x1a04000 0x1000>;
diff --git linux-libre-6.12-gnu/arch/arm/boot/dts/renesas/r7s72100-genmai.dts linux-libre-6.12.79-gnu/arch/arm/boot/dts/renesas/r7s72100-genmai.dts
index 29ba098f5dd5..28e703e0f152 100644
--- linux-libre-6.12-gnu/arch/arm/boot/dts/renesas/r7s72100-genmai.dts
+++ linux-libre-6.12.79-gnu/arch/arm/boot/dts/renesas/r7s72100-genmai.dts
@@ -53,7 +53,7 @@
 
 			partition@4000000 {
 				label = "user1";
-				reg = <0x04000000 0x40000000>;
+				reg = <0x04000000 0x04000000>;
 			};
 		};
 	};
diff --git linux-libre-6.12-gnu/arch/arm/boot/dts/renesas/r8a7791-porter.dts linux-libre-6.12.79-gnu/arch/arm/boot/dts/renesas/r8a7791-porter.dts
index 93c86e921645..b255eb228dd7 100644
--- linux-libre-6.12-gnu/arch/arm/boot/dts/renesas/r8a7791-porter.dts
+++ linux-libre-6.12.79-gnu/arch/arm/boot/dts/renesas/r8a7791-porter.dts
@@ -290,7 +290,7 @@
 	};
 
 	can0_pins: can0 {
-		groups = "can0_data";
+		groups = "can0_data_b";
 		function = "can0";
 	};
 
diff --git linux-libre-6.12-gnu/arch/arm/boot/dts/renesas/r8a7793-gose.dts linux-libre-6.12.79-gnu/arch/arm/boot/dts/renesas/r8a7793-gose.dts
index 1ea6c757893b..1a4e44c3c5af 100644
--- linux-libre-6.12-gnu/arch/arm/boot/dts/renesas/r8a7793-gose.dts
+++ linux-libre-6.12.79-gnu/arch/arm/boot/dts/renesas/r8a7793-gose.dts
@@ -373,7 +373,6 @@
 				port@3 {
 					reg = <3>;
 					adv7180_out: endpoint {
-						bus-width = <8>;
 						remote-endpoint = <&vin1ep>;
 					};
 				};
diff --git linux-libre-6.12-gnu/arch/arm/boot/dts/renesas/r9a06g032-rzn1d400-db.dts linux-libre-6.12.79-gnu/arch/arm/boot/dts/renesas/r9a06g032-rzn1d400-db.dts
index 31cdca3e623c..5fa7acce4714 100644
--- linux-libre-6.12-gnu/arch/arm/boot/dts/renesas/r9a06g032-rzn1d400-db.dts
+++ linux-libre-6.12.79-gnu/arch/arm/boot/dts/renesas/r9a06g032-rzn1d400-db.dts
@@ -126,8 +126,6 @@
 
 &switch {
 	status = "okay";
-	#address-cells = <1>;
-	#size-cells = <0>;
 
 	pinctrl-names = "default";
 	pinctrl-0 = <&pins_eth3>, <&pins_eth4>, <&pins_mdio1>;
diff --git linux-libre-6.12-gnu/arch/arm/boot/dts/samsung/exynos4210-i9100.dts linux-libre-6.12.79-gnu/arch/arm/boot/dts/samsung/exynos4210-i9100.dts
index 0d8495792a70..0394b948443b 100644
--- linux-libre-6.12-gnu/arch/arm/boot/dts/samsung/exynos4210-i9100.dts
+++ linux-libre-6.12.79-gnu/arch/arm/boot/dts/samsung/exynos4210-i9100.dts
@@ -853,6 +853,7 @@
 	#size-cells = <0>;
 
 	non-removable;
+	cap-power-off-card;
 	bus-width = <4>;
 	mmc-pwrseq = <&wlan_pwrseq>;
 	vmmc-supply = <&vtf_reg>;
diff --git linux-libre-6.12-gnu/arch/arm/boot/dts/samsung/exynos4210-trats.dts linux-libre-6.12.79-gnu/arch/arm/boot/dts/samsung/exynos4210-trats.dts
index 95e0e01b6ff6..6bd902cb8f4a 100644
--- linux-libre-6.12-gnu/arch/arm/boot/dts/samsung/exynos4210-trats.dts
+++ linux-libre-6.12.79-gnu/arch/arm/boot/dts/samsung/exynos4210-trats.dts
@@ -518,6 +518,7 @@
 	#size-cells = <0>;
 
 	non-removable;
+	cap-power-off-card;
 	bus-width = <4>;
 	mmc-pwrseq = <&wlan_pwrseq>;
 	vmmc-supply = <&tflash_reg>;
diff --git linux-libre-6.12-gnu/arch/arm/boot/dts/samsung/exynos4210-universal_c210.dts linux-libre-6.12.79-gnu/arch/arm/boot/dts/samsung/exynos4210-universal_c210.dts
index bdc30f8cf748..91490693432b 100644
--- linux-libre-6.12-gnu/arch/arm/boot/dts/samsung/exynos4210-universal_c210.dts
+++ linux-libre-6.12.79-gnu/arch/arm/boot/dts/samsung/exynos4210-universal_c210.dts
@@ -610,6 +610,7 @@
 	#size-cells = <0>;
 
 	non-removable;
+	cap-power-off-card;
 	bus-width = <4>;
 	mmc-pwrseq = <&wlan_pwrseq>;
 	vmmc-supply = <&ldo5_reg>;
diff --git linux-libre-6.12-gnu/arch/arm/boot/dts/samsung/exynos4412-midas.dtsi linux-libre-6.12.79-gnu/arch/arm/boot/dts/samsung/exynos4412-midas.dtsi
index 3d5aace668dc..977ecc838b0c 100644
--- linux-libre-6.12-gnu/arch/arm/boot/dts/samsung/exynos4412-midas.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm/boot/dts/samsung/exynos4412-midas.dtsi
@@ -1440,6 +1440,7 @@
 	#address-cells = <1>;
 	#size-cells = <0>;
 	non-removable;
+	cap-power-off-card;
 	bus-width = <4>;
 
 	mmc-pwrseq = <&wlan_pwrseq>;
diff --git linux-libre-6.12-gnu/arch/arm/boot/dts/st/stm32mp13xx-dhcor-som.dtsi linux-libre-6.12.79-gnu/arch/arm/boot/dts/st/stm32mp13xx-dhcor-som.dtsi
index ddad6497775b..ffb7233b063d 100644
--- linux-libre-6.12-gnu/arch/arm/boot/dts/st/stm32mp13xx-dhcor-som.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm/boot/dts/st/stm32mp13xx-dhcor-som.dtsi
@@ -85,8 +85,8 @@
 
 			vddcpu: buck1 { /* VDD_CPU_1V2 */
 				regulator-name = "vddcpu";
-				regulator-min-microvolt = <1250000>;
-				regulator-max-microvolt = <1250000>;
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
 				regulator-always-on;
 				regulator-initial-mode = <0>;
 				regulator-over-current-protection;
diff --git linux-libre-6.12-gnu/arch/arm/boot/dts/st/stm32mp151.dtsi linux-libre-6.12.79-gnu/arch/arm/boot/dts/st/stm32mp151.dtsi
index 4f878ec102c1..fdc42a89bd37 100644
--- linux-libre-6.12-gnu/arch/arm/boot/dts/st/stm32mp151.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm/boot/dts/st/stm32mp151.dtsi
@@ -129,7 +129,7 @@
 			reg = <0x4c001000 0x400>;
 			st,proc-id = <0>;
 			interrupts-extended =
-				<&exti 61 1>,
+				<&exti 61 IRQ_TYPE_LEVEL_HIGH>,
 				<&intc GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "rx", "tx";
 			clocks = <&rcc IPCC>;
diff --git linux-libre-6.12-gnu/arch/arm/boot/dts/st/stm32mp157c-phycore-stm32mp15-som.dtsi linux-libre-6.12.79-gnu/arch/arm/boot/dts/st/stm32mp157c-phycore-stm32mp15-som.dtsi
index bf0c32027baf..370b2afbf15b 100644
--- linux-libre-6.12-gnu/arch/arm/boot/dts/st/stm32mp157c-phycore-stm32mp15-som.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm/boot/dts/st/stm32mp157c-phycore-stm32mp15-som.dtsi
@@ -185,13 +185,13 @@
 		interrupt-parent = <&gpioi>;
 		vio-supply = <&v3v3>;
 		vcc-supply = <&v3v3>;
+		st,sample-time = <4>;
+		st,mod-12b = <1>;
+		st,ref-sel = <0>;
+		st,adc-freq = <1>;
 
 		touchscreen {
 			compatible = "st,stmpe-ts";
-			st,sample-time = <4>;
-			st,mod-12b = <1>;
-			st,ref-sel = <0>;
-			st,adc-freq = <1>;
 			st,ave-ctrl = <1>;
 			st,touch-det-delay = <2>;
 			st,settling = <2>;
diff --git linux-libre-6.12-gnu/arch/arm/boot/dts/st/stm32mp15xx-dhcom-drc02.dtsi linux-libre-6.12.79-gnu/arch/arm/boot/dts/st/stm32mp15xx-dhcom-drc02.dtsi
index bb4f8a0b937f..abe2dfe70636 100644
--- linux-libre-6.12-gnu/arch/arm/boot/dts/st/stm32mp15xx-dhcom-drc02.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm/boot/dts/st/stm32mp15xx-dhcom-drc02.dtsi
@@ -6,18 +6,6 @@
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/pwm/pwm.h>
 
-/ {
-	aliases {
-		serial0 = &uart4;
-		serial1 = &usart3;
-		serial2 = &uart8;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-};
-
 &adc {
 	status = "disabled";
 };
diff --git linux-libre-6.12-gnu/arch/arm/boot/dts/st/stm32mp15xx-dhcom-pdk2.dtsi linux-libre-6.12.79-gnu/arch/arm/boot/dts/st/stm32mp15xx-dhcom-pdk2.dtsi
index 171d7c7658fa..0fb4e55843b9 100644
--- linux-libre-6.12-gnu/arch/arm/boot/dts/st/stm32mp15xx-dhcom-pdk2.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm/boot/dts/st/stm32mp15xx-dhcom-pdk2.dtsi
@@ -7,16 +7,6 @@
 #include <dt-bindings/pwm/pwm.h>
 
 / {
-	aliases {
-		serial0 = &uart4;
-		serial1 = &usart3;
-		serial2 = &uart8;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
 	clk_ext_audio_codec: clock-codec {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
diff --git linux-libre-6.12-gnu/arch/arm/boot/dts/st/stm32mp15xx-dhcom-picoitx.dtsi linux-libre-6.12.79-gnu/arch/arm/boot/dts/st/stm32mp15xx-dhcom-picoitx.dtsi
index b5bc53accd6b..01c693cc0344 100644
--- linux-libre-6.12-gnu/arch/arm/boot/dts/st/stm32mp15xx-dhcom-picoitx.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm/boot/dts/st/stm32mp15xx-dhcom-picoitx.dtsi
@@ -7,16 +7,6 @@
 #include <dt-bindings/pwm/pwm.h>
 
 / {
-	aliases {
-		serial0 = &uart4;
-		serial1 = &usart3;
-		serial2 = &uart8;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
 	led {
 		compatible = "gpio-leds";
 
diff --git linux-libre-6.12-gnu/arch/arm/boot/dts/st/stm32mp15xx-dhcom-som.dtsi linux-libre-6.12.79-gnu/arch/arm/boot/dts/st/stm32mp15xx-dhcom-som.dtsi
index 74a11ccc5333..142d4a8731f8 100644
--- linux-libre-6.12-gnu/arch/arm/boot/dts/st/stm32mp15xx-dhcom-som.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm/boot/dts/st/stm32mp15xx-dhcom-som.dtsi
@@ -14,6 +14,13 @@
 		ethernet1 = &ksz8851;
 		rtc0 = &hwrtc;
 		rtc1 = &rtc;
+		serial0 = &uart4;
+		serial1 = &uart8;
+		serial2 = &usart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
 	};
 
 	memory@c0000000 {
diff --git linux-libre-6.12-gnu/arch/arm/boot/dts/ti/omap/am335x-baltos.dtsi linux-libre-6.12.79-gnu/arch/arm/boot/dts/ti/omap/am335x-baltos.dtsi
index a4beb718559c..9ee9e7a1343c 100644
--- linux-libre-6.12-gnu/arch/arm/boot/dts/ti/omap/am335x-baltos.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm/boot/dts/ti/omap/am335x-baltos.dtsi
@@ -270,7 +270,7 @@
 	vcc7-supply = <&vbat>;
 	vccio-supply = <&vbat>;
 
-	ti,en-ck32k-xtal = <1>;
+	ti,en-ck32k-xtal;
 
 	regulators {
 		vrtc_reg: regulator@0 {
diff --git linux-libre-6.12-gnu/arch/arm/boot/dts/ti/omap/am335x-boneblack.dts linux-libre-6.12.79-gnu/arch/arm/boot/dts/ti/omap/am335x-boneblack.dts
index 16b567e3cb47..b4fdcf9c02b5 100644
--- linux-libre-6.12-gnu/arch/arm/boot/dts/ti/omap/am335x-boneblack.dts
+++ linux-libre-6.12.79-gnu/arch/arm/boot/dts/ti/omap/am335x-boneblack.dts
@@ -35,7 +35,7 @@
 		"P9_18 [spi0_d1]",
 		"P9_17 [spi0_cs0]",
 		"[mmc0_cd]",
-		"P8_42A [ecappwm0]",
+		"P9_42A [ecappwm0]",
 		"P8_35 [lcd d12]",
 		"P8_33 [lcd d13]",
 		"P8_31 [lcd d14]",
diff --git linux-libre-6.12-gnu/arch/arm/boot/dts/ti/omap/am335x-cm-t335.dts linux-libre-6.12.79-gnu/arch/arm/boot/dts/ti/omap/am335x-cm-t335.dts
index 06767ea164b5..ece7f7854f6a 100644
--- linux-libre-6.12-gnu/arch/arm/boot/dts/ti/omap/am335x-cm-t335.dts
+++ linux-libre-6.12.79-gnu/arch/arm/boot/dts/ti/omap/am335x-cm-t335.dts
@@ -483,8 +483,6 @@ status = "okay";
 
 		op-mode = <0>;          /* MCASP_IIS_MODE */
 		tdm-slots = <2>;
-		/* 16 serializers */
-		num-serializer = <16>;
 		serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
 			0 0 2 1 0 0 0 0 0 0 0 0 0 0 0 0
 		>;
diff --git linux-libre-6.12-gnu/arch/arm/boot/dts/ti/omap/am335x-netcom-plus-2xx.dts linux-libre-6.12.79-gnu/arch/arm/boot/dts/ti/omap/am335x-netcom-plus-2xx.dts
index f66d57bb685e..f0519ab30141 100644
--- linux-libre-6.12-gnu/arch/arm/boot/dts/ti/omap/am335x-netcom-plus-2xx.dts
+++ linux-libre-6.12.79-gnu/arch/arm/boot/dts/ti/omap/am335x-netcom-plus-2xx.dts
@@ -222,10 +222,10 @@
 		"ModeA1",
 		"ModeA2",
 		"ModeA3",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
+		"ModeB0",
+		"ModeB1",
+		"ModeB2",
+		"ModeB3",
 		"NC",
 		"NC",
 		"NC",
diff --git linux-libre-6.12-gnu/arch/arm/boot/dts/ti/omap/dra7-l4.dtsi linux-libre-6.12.79-gnu/arch/arm/boot/dts/ti/omap/dra7-l4.dtsi
index 6e67d99832ac..ba7fdaae9c6e 100644
--- linux-libre-6.12-gnu/arch/arm/boot/dts/ti/omap/dra7-l4.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm/boot/dts/ti/omap/dra7-l4.dtsi
@@ -12,6 +12,7 @@
 	ranges = <0x00000000 0x4a000000 0x100000>,	/* segment 0 */
 		 <0x00100000 0x4a100000 0x100000>,	/* segment 1 */
 		 <0x00200000 0x4a200000 0x100000>;	/* segment 2 */
+	dma-ranges;
 
 	segment@0 {					/* 0x4a000000 */
 		compatible = "simple-pm-bus";
@@ -557,6 +558,7 @@
 			 <0x0007e000 0x0017e000 0x001000>,	/* ap 124 */
 			 <0x00059000 0x00159000 0x001000>,	/* ap 125 */
 			 <0x0005a000 0x0015a000 0x001000>;	/* ap 126 */
+		dma-ranges;
 
 		target-module@2000 {			/* 0x4a102000, ap 27 3c.0 */
 			compatible = "ti,sysc";
diff --git linux-libre-6.12-gnu/arch/arm/boot/dts/ti/omap/omap3-beagle-xm.dts linux-libre-6.12.79-gnu/arch/arm/boot/dts/ti/omap/omap3-beagle-xm.dts
index 08ee0f8ea68f..71b39a923d37 100644
--- linux-libre-6.12-gnu/arch/arm/boot/dts/ti/omap/omap3-beagle-xm.dts
+++ linux-libre-6.12.79-gnu/arch/arm/boot/dts/ti/omap/omap3-beagle-xm.dts
@@ -291,7 +291,7 @@
 		};
 
 		twl_power: power {
-			compatible = "ti,twl4030-power-beagleboard-xm", "ti,twl4030-power-idle-osc-off";
+			compatible = "ti,twl4030-power-idle-osc-off";
 			ti,use_poweroff;
 		};
 	};
diff --git linux-libre-6.12-gnu/arch/arm/boot/dts/ti/omap/omap3-devkit8000-lcd-common.dtsi linux-libre-6.12.79-gnu/arch/arm/boot/dts/ti/omap/omap3-devkit8000-lcd-common.dtsi
index a7f99ae0c1fe..78c657429f64 100644
--- linux-libre-6.12-gnu/arch/arm/boot/dts/ti/omap/omap3-devkit8000-lcd-common.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm/boot/dts/ti/omap/omap3-devkit8000-lcd-common.dtsi
@@ -65,7 +65,7 @@
 		ti,debounce-max = /bits/ 16 <10>;
 		ti,debounce-tol = /bits/ 16 <5>;
 		ti,debounce-rep = /bits/ 16 <1>;
-		ti,keep-vref-on = <1>;
+		ti,keep-vref-on;
 		ti,settle-delay-usec = /bits/ 16 <150>;
 
 		wakeup-source;
diff --git linux-libre-6.12-gnu/arch/arm/boot/dts/ti/omap/omap3-gta04.dtsi linux-libre-6.12.79-gnu/arch/arm/boot/dts/ti/omap/omap3-gta04.dtsi
index 3661340009e7..8dca2bed941b 100644
--- linux-libre-6.12-gnu/arch/arm/boot/dts/ti/omap/omap3-gta04.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm/boot/dts/ti/omap/omap3-gta04.dtsi
@@ -446,6 +446,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <
 			&hsusb2_2_pins
+			&mcspi3hog_pins
 	>;
 
 	hsusb2_2_pins: hsusb2-2-pins {
@@ -459,6 +460,15 @@
 		>;
 	};
 
+	mcspi3hog_pins: mcspi3hog-pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25dc, PIN_OUTPUT_PULLDOWN | MUX_MODE4)	/* etk_d0 */
+			OMAP3630_CORE2_IOPAD(0x25de, PIN_OUTPUT_PULLDOWN | MUX_MODE4)	/* etk_d1 */
+			OMAP3630_CORE2_IOPAD(0x25e0, PIN_OUTPUT_PULLDOWN | MUX_MODE4)	/* etk_d2 */
+			OMAP3630_CORE2_IOPAD(0x25e2, PIN_OUTPUT_PULLDOWN | MUX_MODE4)	/* etk_d3 */
+		>;
+	};
+
 	spi_gpio_pins: spi-gpio-pinmux-pins {
 		pinctrl-single,pins = <
 			OMAP3630_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE4) /* clk */
diff --git linux-libre-6.12-gnu/arch/arm/boot/dts/ti/omap/omap3-n900.dts linux-libre-6.12.79-gnu/arch/arm/boot/dts/ti/omap/omap3-n900.dts
index 4bde3342bb95..598a4885094d 100644
--- linux-libre-6.12-gnu/arch/arm/boot/dts/ti/omap/omap3-n900.dts
+++ linux-libre-6.12.79-gnu/arch/arm/boot/dts/ti/omap/omap3-n900.dts
@@ -508,7 +508,7 @@
 	};
 
 	twl_power: power {
-		compatible = "ti,twl4030-power-n900", "ti,twl4030-power-idle-osc-off";
+		compatible = "ti,twl4030-power-idle-osc-off";
 		ti,use_poweroff;
 	};
 };
diff --git linux-libre-6.12-gnu/arch/arm/boot/dts/ti/omap/omap36xx.dtsi linux-libre-6.12.79-gnu/arch/arm/boot/dts/ti/omap/omap36xx.dtsi
index c3d79ecd56e3..c217094b50ab 100644
--- linux-libre-6.12-gnu/arch/arm/boot/dts/ti/omap/omap36xx.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm/boot/dts/ti/omap/omap36xx.dtsi
@@ -72,6 +72,7 @@
 					 <1375000 1375000 1375000>;
 			/* only on am/dm37x with speed-binned bit set */
 			opp-supported-hw = <0xffffffff 2>;
+			turbo-mode;
 		};
 	};
 
diff --git linux-libre-6.12-gnu/arch/arm/crypto/Kconfig linux-libre-6.12.79-gnu/arch/arm/crypto/Kconfig
index 5ff49a5e9afc..df2ae5c6af95 100644
--- linux-libre-6.12-gnu/arch/arm/crypto/Kconfig
+++ linux-libre-6.12.79-gnu/arch/arm/crypto/Kconfig
@@ -3,10 +3,12 @@
 menu "Accelerated Cryptographic Algorithms for CPU (arm)"
 
 config CRYPTO_CURVE25519_NEON
-	tristate "Public key crypto: Curve25519 (NEON)"
-	depends on KERNEL_MODE_NEON
+	tristate
+	depends on KERNEL_MODE_NEON && !CPU_BIG_ENDIAN
+	select CRYPTO_KPP
 	select CRYPTO_LIB_CURVE25519_GENERIC
 	select CRYPTO_ARCH_HAVE_LIB_CURVE25519
+	default CRYPTO_LIB_CURVE25519_INTERNAL
 	help
 	  Curve25519 algorithm
 
@@ -45,9 +47,10 @@ config CRYPTO_NHPOLY1305_NEON
 	  - NEON (Advanced SIMD) extensions
 
 config CRYPTO_POLY1305_ARM
-	tristate "Hash functions: Poly1305 (NEON)"
+	tristate
 	select CRYPTO_HASH
 	select CRYPTO_ARCH_HAVE_LIB_POLY1305
+	default CRYPTO_LIB_POLY1305_INTERNAL
 	help
 	  Poly1305 authenticator algorithm (RFC7539)
 
@@ -212,9 +215,10 @@ config CRYPTO_AES_ARM_CE
 	  - ARMv8 Crypto Extensions
 
 config CRYPTO_CHACHA20_NEON
-	tristate "Ciphers: ChaCha20, XChaCha20, XChaCha12 (NEON)"
+	tristate
 	select CRYPTO_SKCIPHER
 	select CRYPTO_ARCH_HAVE_LIB_CHACHA
+	default CRYPTO_LIB_CHACHA_INTERNAL
 	help
 	  Length-preserving ciphers: ChaCha20, XChaCha20, and XChaCha12
 	  stream cipher algorithms
diff --git linux-libre-6.12-gnu/arch/arm/crypto/aes-neonbs-glue.c linux-libre-6.12.79-gnu/arch/arm/crypto/aes-neonbs-glue.c
index f6be80b5938b..2fad3a0c0563 100644
--- linux-libre-6.12-gnu/arch/arm/crypto/aes-neonbs-glue.c
+++ linux-libre-6.12.79-gnu/arch/arm/crypto/aes-neonbs-glue.c
@@ -232,7 +232,7 @@ static int ctr_encrypt(struct skcipher_request *req)
 	while (walk.nbytes > 0) {
 		const u8 *src = walk.src.virt.addr;
 		u8 *dst = walk.dst.virt.addr;
-		int bytes = walk.nbytes;
+		unsigned int bytes = walk.nbytes;
 
 		if (unlikely(bytes < AES_BLOCK_SIZE))
 			src = dst = memcpy(buf + sizeof(buf) - bytes,
diff --git linux-libre-6.12-gnu/arch/arm/include/asm/string.h linux-libre-6.12.79-gnu/arch/arm/include/asm/string.h
index 6c607c68f3ad..96fc6cf460ec 100644
--- linux-libre-6.12-gnu/arch/arm/include/asm/string.h
+++ linux-libre-6.12.79-gnu/arch/arm/include/asm/string.h
@@ -39,10 +39,17 @@ static inline void *memset32(uint32_t *p, uint32_t v, __kernel_size_t n)
 }
 
 #define __HAVE_ARCH_MEMSET64
-extern void *__memset64(uint64_t *, uint32_t low, __kernel_size_t, uint32_t hi);
+extern void *__memset64(uint64_t *, uint32_t first, __kernel_size_t, uint32_t second);
 static inline void *memset64(uint64_t *p, uint64_t v, __kernel_size_t n)
 {
-	return __memset64(p, v, n * 8, v >> 32);
+	union {
+		uint64_t val;
+		struct {
+			uint32_t first, second;
+		};
+	} word = { .val = v };
+
+	return __memset64(p, word.first, n * 8, word.second);
 }
 
 /*
diff --git linux-libre-6.12-gnu/arch/arm/include/asm/vmlinux.lds.h linux-libre-6.12.79-gnu/arch/arm/include/asm/vmlinux.lds.h
index d60f6e83a9f7..14811b4f48ec 100644
--- linux-libre-6.12-gnu/arch/arm/include/asm/vmlinux.lds.h
+++ linux-libre-6.12.79-gnu/arch/arm/include/asm/vmlinux.lds.h
@@ -34,6 +34,12 @@
 #define NOCROSSREFS
 #endif
 
+#ifdef CONFIG_LD_CAN_USE_KEEP_IN_OVERLAY
+#define OVERLAY_KEEP(x)		KEEP(x)
+#else
+#define OVERLAY_KEEP(x)		x
+#endif
+
 /* Set start/end symbol names to the LMA for the section */
 #define ARM_LMA(sym, section)						\
 	sym##_start = LOADADDR(section);				\
@@ -125,13 +131,13 @@
 	__vectors_lma = .;						\
 	OVERLAY 0xffff0000 : NOCROSSREFS AT(__vectors_lma) {		\
 		.vectors {						\
-			*(.vectors)					\
+			OVERLAY_KEEP(*(.vectors))			\
 		}							\
 		.vectors.bhb.loop8 {					\
-			*(.vectors.bhb.loop8)				\
+			OVERLAY_KEEP(*(.vectors.bhb.loop8))		\
 		}							\
 		.vectors.bhb.bpiall {					\
-			*(.vectors.bhb.bpiall)				\
+			OVERLAY_KEEP(*(.vectors.bhb.bpiall))		\
 		}							\
 	}								\
 	ARM_LMA(__vectors, .vectors);					\
diff --git linux-libre-6.12-gnu/arch/arm/include/asm/word-at-a-time.h linux-libre-6.12.79-gnu/arch/arm/include/asm/word-at-a-time.h
index f9a3897b06e7..5023f98d8293 100644
--- linux-libre-6.12-gnu/arch/arm/include/asm/word-at-a-time.h
+++ linux-libre-6.12.79-gnu/arch/arm/include/asm/word-at-a-time.h
@@ -67,7 +67,7 @@ static inline unsigned long find_zero(unsigned long mask)
  */
 static inline unsigned long load_unaligned_zeropad(const void *addr)
 {
-	unsigned long ret, offset;
+	unsigned long ret, tmp;
 
 	/* Load word from unaligned pointer addr */
 	asm(
@@ -75,9 +75,9 @@ static inline unsigned long load_unaligned_zeropad(const void *addr)
 	"2:\n"
 	"	.pushsection .text.fixup,\"ax\"\n"
 	"	.align 2\n"
-	"3:	and	%1, %2, #0x3\n"
-	"	bic	%2, %2, #0x3\n"
-	"	ldr	%0, [%2]\n"
+	"3:	bic	%1, %2, #0x3\n"
+	"	ldr	%0, [%1]\n"
+	"	and	%1, %2, #0x3\n"
 	"	lsl	%1, %1, #0x3\n"
 #ifndef __ARMEB__
 	"	lsr	%0, %0, %1\n"
@@ -90,7 +90,7 @@ static inline unsigned long load_unaligned_zeropad(const void *addr)
 	"	.align	3\n"
 	"	.long	1b, 3b\n"
 	"	.popsection"
-	: "=&r" (ret), "=&r" (offset)
+	: "=&r" (ret), "=&r" (tmp)
 	: "r" (addr), "Qo" (*(unsigned long *)addr));
 
 	return ret;
diff --git linux-libre-6.12-gnu/arch/arm/kernel/asm-offsets.c linux-libre-6.12.79-gnu/arch/arm/kernel/asm-offsets.c
index 4853875740d0..d9f129c584b1 100644
--- linux-libre-6.12-gnu/arch/arm/kernel/asm-offsets.c
+++ linux-libre-6.12.79-gnu/arch/arm/kernel/asm-offsets.c
@@ -7,6 +7,8 @@
  * This code generates raw asm output which is post-processed to extract
  * and format the required data.
  */
+#define COMPILE_OFFSETS
+
 #include <linux/compiler.h>
 #include <linux/sched.h>
 #include <linux/mm.h>
diff --git linux-libre-6.12-gnu/arch/arm/kernel/devtree.c linux-libre-6.12.79-gnu/arch/arm/kernel/devtree.c
index fdb74e64206a..3b78966e750a 100644
--- linux-libre-6.12-gnu/arch/arm/kernel/devtree.c
+++ linux-libre-6.12.79-gnu/arch/arm/kernel/devtree.c
@@ -200,7 +200,7 @@ const struct machine_desc * __init setup_machine_fdt(void *dt_virt)
 
 	mdesc_best = &__mach_desc_GENERIC_DT;
 
-	if (!dt_virt || !early_init_dt_verify(dt_virt))
+	if (!dt_virt || !early_init_dt_verify(dt_virt, __pa(dt_virt)))
 		return NULL;
 
 	mdesc = of_flat_dt_match_machine(mdesc_best, arch_get_next_mach);
diff --git linux-libre-6.12-gnu/arch/arm/kernel/entry-armv.S linux-libre-6.12.79-gnu/arch/arm/kernel/entry-armv.S
index 1dfae1af8e31..ef6a657c8d13 100644
--- linux-libre-6.12-gnu/arch/arm/kernel/entry-armv.S
+++ linux-libre-6.12.79-gnu/arch/arm/kernel/entry-armv.S
@@ -25,6 +25,7 @@
 #include <asm/tls.h>
 #include <asm/system_info.h>
 #include <asm/uaccess-asm.h>
+#include <asm/kasan_def.h>
 
 #include "entry-header.S"
 #include <asm/probes.h>
@@ -561,6 +562,13 @@ ENTRY(__switch_to)
 	@ entries covering the vmalloc region.
 	@
 	ldr	r2, [ip]
+#ifdef CONFIG_KASAN_VMALLOC
+	@ Also dummy read from the KASAN shadow memory for the new stack if we
+	@ are using KASAN
+	mov_l	r2, KASAN_SHADOW_OFFSET
+	add	r2, r2, ip, lsr #KASAN_SHADOW_SCALE_SHIFT
+	ldr	r2, [r2]
+#endif
 #endif
 
 	@ When CONFIG_THREAD_INFO_IN_TASK=n, the update of SP itself is what
diff --git linux-libre-6.12-gnu/arch/arm/kernel/machine_kexec.c linux-libre-6.12.79-gnu/arch/arm/kernel/machine_kexec.c
index 80ceb5bd2680..dd430477e7c1 100644
--- linux-libre-6.12-gnu/arch/arm/kernel/machine_kexec.c
+++ linux-libre-6.12.79-gnu/arch/arm/kernel/machine_kexec.c
@@ -127,29 +127,6 @@ void crash_smp_send_stop(void)
 	cpus_stopped = 1;
 }
 
-static void machine_kexec_mask_interrupts(void)
-{
-	unsigned int i;
-	struct irq_desc *desc;
-
-	for_each_irq_desc(i, desc) {
-		struct irq_chip *chip;
-
-		chip = irq_desc_get_chip(desc);
-		if (!chip)
-			continue;
-
-		if (chip->irq_eoi && irqd_irq_inprogress(&desc->irq_data))
-			chip->irq_eoi(&desc->irq_data);
-
-		if (chip->irq_mask)
-			chip->irq_mask(&desc->irq_data);
-
-		if (chip->irq_disable && !irqd_irq_disabled(&desc->irq_data))
-			chip->irq_disable(&desc->irq_data);
-	}
-}
-
 void machine_crash_shutdown(struct pt_regs *regs)
 {
 	local_irq_disable();
diff --git linux-libre-6.12-gnu/arch/arm/kernel/vdso.c linux-libre-6.12.79-gnu/arch/arm/kernel/vdso.c
index d499ad461b00..6e5494bf5a24 100644
--- linux-libre-6.12-gnu/arch/arm/kernel/vdso.c
+++ linux-libre-6.12.79-gnu/arch/arm/kernel/vdso.c
@@ -172,6 +172,7 @@ static void __init patch_vdso(void *ehdr)
 		vdso_nullpatch_one(&einfo, "__vdso_gettimeofday");
 		vdso_nullpatch_one(&einfo, "__vdso_clock_gettime");
 		vdso_nullpatch_one(&einfo, "__vdso_clock_gettime64");
+		vdso_nullpatch_one(&einfo, "__vdso_clock_getres");
 	}
 }
 
diff --git linux-libre-6.12-gnu/arch/arm/mach-aspeed/Kconfig linux-libre-6.12.79-gnu/arch/arm/mach-aspeed/Kconfig
index 080019aa6fcd..fcf287edd0e5 100644
--- linux-libre-6.12-gnu/arch/arm/mach-aspeed/Kconfig
+++ linux-libre-6.12.79-gnu/arch/arm/mach-aspeed/Kconfig
@@ -2,7 +2,6 @@
 menuconfig ARCH_ASPEED
 	bool "Aspeed BMC architectures"
 	depends on (CPU_LITTLE_ENDIAN && ARCH_MULTI_V5) || ARCH_MULTI_V6 || ARCH_MULTI_V7
-	select SRAM
 	select WATCHDOG
 	select ASPEED_WATCHDOG
 	select MFD_SYSCON
diff --git linux-libre-6.12-gnu/arch/arm/mach-at91/pm.c linux-libre-6.12.79-gnu/arch/arm/mach-at91/pm.c
index b9b995f8a36e..6c3e6aa22606 100644
--- linux-libre-6.12-gnu/arch/arm/mach-at91/pm.c
+++ linux-libre-6.12.79-gnu/arch/arm/mach-at91/pm.c
@@ -545,11 +545,12 @@ extern u32 at91_pm_suspend_in_sram_sz;
 
 static int at91_suspend_finish(unsigned long val)
 {
-	unsigned char modified_gray_code[] = {
-		0x00, 0x01, 0x02, 0x03, 0x06, 0x07, 0x04, 0x05, 0x0c, 0x0d,
-		0x0e, 0x0f, 0x0a, 0x0b, 0x08, 0x09, 0x18, 0x19, 0x1a, 0x1b,
-		0x1e, 0x1f, 0x1c, 0x1d, 0x14, 0x15, 0x16, 0x17, 0x12, 0x13,
-		0x10, 0x11,
+	/* SYNOPSYS workaround to fix a bug in the calibration logic */
+	unsigned char modified_fix_code[] = {
+		0x00, 0x01, 0x01, 0x06, 0x07, 0x0c, 0x06, 0x07, 0x0b, 0x18,
+		0x0a, 0x0b, 0x0c, 0x0d, 0x0d, 0x0a, 0x13, 0x13, 0x12, 0x13,
+		0x14, 0x15, 0x15, 0x12, 0x18, 0x19, 0x19, 0x1e, 0x1f, 0x14,
+		0x1e, 0x1f,
 	};
 	unsigned int tmp, index;
 	int i;
@@ -560,25 +561,25 @@ static int at91_suspend_finish(unsigned long val)
 		 * restore the ZQ0SR0 with the value saved here. But the
 		 * calibration is buggy and restoring some values from ZQ0SR0
 		 * is forbidden and risky thus we need to provide processed
-		 * values for these (modified gray code values).
+		 * values for these.
 		 */
 		tmp = readl(soc_pm.data.ramc_phy + DDR3PHY_ZQ0SR0);
 
 		/* Store pull-down output impedance select. */
 		index = (tmp >> DDR3PHY_ZQ0SR0_PDO_OFF) & 0x1f;
-		soc_pm.bu->ddr_phy_calibration[0] = modified_gray_code[index];
+		soc_pm.bu->ddr_phy_calibration[0] = modified_fix_code[index] << DDR3PHY_ZQ0SR0_PDO_OFF;
 
 		/* Store pull-up output impedance select. */
 		index = (tmp >> DDR3PHY_ZQ0SR0_PUO_OFF) & 0x1f;
-		soc_pm.bu->ddr_phy_calibration[0] |= modified_gray_code[index];
+		soc_pm.bu->ddr_phy_calibration[0] |= modified_fix_code[index] << DDR3PHY_ZQ0SR0_PUO_OFF;
 
 		/* Store pull-down on-die termination impedance select. */
 		index = (tmp >> DDR3PHY_ZQ0SR0_PDODT_OFF) & 0x1f;
-		soc_pm.bu->ddr_phy_calibration[0] |= modified_gray_code[index];
+		soc_pm.bu->ddr_phy_calibration[0] |= modified_fix_code[index] << DDR3PHY_ZQ0SR0_PDODT_OFF;
 
 		/* Store pull-up on-die termination impedance select. */
 		index = (tmp >> DDR3PHY_ZQ0SRO_PUODT_OFF) & 0x1f;
-		soc_pm.bu->ddr_phy_calibration[0] |= modified_gray_code[index];
+		soc_pm.bu->ddr_phy_calibration[0] |= modified_fix_code[index] << DDR3PHY_ZQ0SRO_PUODT_OFF;
 
 		/*
 		 * The 1st 8 words of memory might get corrupted in the process
@@ -598,7 +599,21 @@ static int at91_suspend_finish(unsigned long val)
 	return 0;
 }
 
-static void at91_pm_switch_ba_to_vbat(void)
+/**
+ * at91_pm_switch_ba_to_auto() - Configure Backup Unit Power Switch
+ * to automatic/hardware mode.
+ *
+ * The Backup Unit Power Switch can be managed either by software or hardware.
+ * Enabling hardware mode allows the automatic transition of power between
+ * VDDANA (or VDDIN33) and VDDBU (or VBAT, respectively), based on the
+ * availability of these power sources.
+ *
+ * If the Backup Unit Power Switch is already in automatic mode, no action is
+ * required. If it is in software-controlled mode, it is switched to automatic
+ * mode to enhance safety and eliminate the need for toggling between power
+ * sources.
+ */
+static void at91_pm_switch_ba_to_auto(void)
 {
 	unsigned int offset = offsetof(struct at91_pm_sfrbu_regs, pswbu);
 	unsigned int val;
@@ -609,24 +624,19 @@ static void at91_pm_switch_ba_to_vbat(void)
 
 	val = readl(soc_pm.data.sfrbu + offset);
 
-	/* Already on VBAT. */
-	if (!(val & soc_pm.sfrbu_regs.pswbu.state))
+	/* Already on auto/hardware. */
+	if (!(val & soc_pm.sfrbu_regs.pswbu.ctrl))
 		return;
 
-	val &= ~soc_pm.sfrbu_regs.pswbu.softsw;
-	val |= soc_pm.sfrbu_regs.pswbu.key | soc_pm.sfrbu_regs.pswbu.ctrl;
+	val &= ~soc_pm.sfrbu_regs.pswbu.ctrl;
+	val |= soc_pm.sfrbu_regs.pswbu.key;
 	writel(val, soc_pm.data.sfrbu + offset);
-
-	/* Wait for update. */
-	val = readl(soc_pm.data.sfrbu + offset);
-	while (val & soc_pm.sfrbu_regs.pswbu.state)
-		val = readl(soc_pm.data.sfrbu + offset);
 }
 
 static void at91_pm_suspend(suspend_state_t state)
 {
 	if (soc_pm.data.mode == AT91_PM_BACKUP) {
-		at91_pm_switch_ba_to_vbat();
+		at91_pm_switch_ba_to_auto();
 
 		cpu_suspend(0, at91_suspend_finish);
 
diff --git linux-libre-6.12-gnu/arch/arm/mach-at91/pm_suspend.S linux-libre-6.12.79-gnu/arch/arm/mach-at91/pm_suspend.S
index e5869cca5e79..99aaf5cf8969 100644
--- linux-libre-6.12-gnu/arch/arm/mach-at91/pm_suspend.S
+++ linux-libre-6.12.79-gnu/arch/arm/mach-at91/pm_suspend.S
@@ -689,6 +689,10 @@ sr_dis_exit:
 	bic	tmp2, tmp2, #AT91_PMC_PLL_UPDT_ID
 	str	tmp2, [pmc, #AT91_PMC_PLL_UPDT]
 
+	/* save acr */
+	ldr	tmp2, [pmc, #AT91_PMC_PLL_ACR]
+	str	tmp2, .saved_acr
+
 	/* save div. */
 	mov	tmp1, #0
 	ldr	tmp2, [pmc, #AT91_PMC_PLL_CTRL0]
@@ -758,7 +762,7 @@ sr_dis_exit:
 	str	tmp1, [pmc, #AT91_PMC_PLL_UPDT]
 
 	/* step 2. */
-	ldr	tmp1, =AT91_PMC_PLL_ACR_DEFAULT_PLLA
+	ldr	tmp1, .saved_acr
 	str	tmp1, [pmc, #AT91_PMC_PLL_ACR]
 
 	/* step 3. */
@@ -872,7 +876,7 @@ e_done:
 /**
  * at91_mckx_ps_restore: restore MCK1..4 settings
  *
- * Side effects: overwrites tmp1, tmp2
+ * Side effects: overwrites tmp1, tmp2 and tmp3
  */
 .macro at91_mckx_ps_restore
 #ifdef CONFIG_SOC_SAMA7
@@ -916,7 +920,7 @@ r_ps:
 	bic	tmp3, tmp3, #AT91_PMC_MCR_V2_ID_MSK
 	orr	tmp3, tmp3, tmp1
 	orr	tmp3, tmp3, #AT91_PMC_MCR_V2_CMD
-	str	tmp2, [pmc, #AT91_PMC_MCR_V2]
+	str	tmp3, [pmc, #AT91_PMC_MCR_V2]
 
 	wait_mckrdy tmp1
 
@@ -1134,6 +1138,8 @@ ENDPROC(at91_pm_suspend_in_sram)
 	.word 0
 .saved_mckr:
 	.word 0
+.saved_acr:
+	.word 0
 .saved_pllar:
 	.word 0
 .saved_sam9_lpr:
diff --git linux-libre-6.12-gnu/arch/arm/mach-davinci/Kconfig linux-libre-6.12.79-gnu/arch/arm/mach-davinci/Kconfig
index 2a8a9fe46586..3fa15f342240 100644
--- linux-libre-6.12-gnu/arch/arm/mach-davinci/Kconfig
+++ linux-libre-6.12.79-gnu/arch/arm/mach-davinci/Kconfig
@@ -27,6 +27,7 @@ config ARCH_DAVINCI_DA830
 
 config ARCH_DAVINCI_DA850
 	bool "DA850/OMAP-L138/AM18x based system"
+	select ARCH_DAVINCI_DA8XX
 	select DAVINCI_CP_INTC
 
 config ARCH_DAVINCI_DA8XX
diff --git linux-libre-6.12-gnu/arch/arm/mach-omap1/Kconfig linux-libre-6.12.79-gnu/arch/arm/mach-omap1/Kconfig
index a643b71e30a3..08ec6bd84ada 100644
--- linux-libre-6.12-gnu/arch/arm/mach-omap1/Kconfig
+++ linux-libre-6.12.79-gnu/arch/arm/mach-omap1/Kconfig
@@ -8,6 +8,7 @@ menuconfig ARCH_OMAP1
 	select ARCH_OMAP
 	select CLKSRC_MMIO
 	select FORCE_PCI if PCCARD
+	select GENERIC_IRQ_CHIP
 	select GPIOLIB
 	help
 	  Support for older TI OMAP1 (omap7xx, omap15xx or omap16xx)
diff --git linux-libre-6.12-gnu/arch/arm/mach-omap1/board-nokia770.c linux-libre-6.12.79-gnu/arch/arm/mach-omap1/board-nokia770.c
index 3312ef93355d..a5bf5554800f 100644
--- linux-libre-6.12-gnu/arch/arm/mach-omap1/board-nokia770.c
+++ linux-libre-6.12.79-gnu/arch/arm/mach-omap1/board-nokia770.c
@@ -289,7 +289,7 @@ static struct gpiod_lookup_table nokia770_irq_gpio_table = {
 		GPIO_LOOKUP("gpio-0-15", 15, "ads7846_irq",
 			    GPIO_ACTIVE_HIGH),
 		/* GPIO used for retu IRQ */
-		GPIO_LOOKUP("gpio-48-63", 15, "retu_irq",
+		GPIO_LOOKUP("gpio-48-63", 14, "retu_irq",
 			    GPIO_ACTIVE_HIGH),
 		/* GPIO used for tahvo IRQ */
 		GPIO_LOOKUP("gpio-32-47", 8, "tahvo_irq",
diff --git linux-libre-6.12-gnu/arch/arm/mach-omap2/am33xx-restart.c linux-libre-6.12.79-gnu/arch/arm/mach-omap2/am33xx-restart.c
index fcf3d557aa78..3cdf223addcc 100644
--- linux-libre-6.12-gnu/arch/arm/mach-omap2/am33xx-restart.c
+++ linux-libre-6.12.79-gnu/arch/arm/mach-omap2/am33xx-restart.c
@@ -2,12 +2,46 @@
 /*
  * am33xx-restart.c - Code common to all AM33xx machines.
  */
+#include <dt-bindings/pinctrl/am33xx.h>
+#include <linux/delay.h>
 #include <linux/kernel.h>
 #include <linux/reboot.h>
 
 #include "common.h"
+#include "control.h"
 #include "prm.h"
 
+/*
+ * Advisory 1.0.36 EMU0 and EMU1: Terminals Must be Pulled High Before
+ * ICEPick Samples
+ *
+ * If EMU0/EMU1 pins have been used as GPIO outputs and actively driving low
+ * level, the device might not reboot in normal mode. We are in a bad position
+ * to override GPIO state here, so just switch the pins into EMU input mode
+ * (that's what reset will do anyway) and wait a bit, because the state will be
+ * latched 190 ns after reset.
+ */
+static void am33xx_advisory_1_0_36(void)
+{
+	u32 emu0 = omap_ctrl_readl(AM335X_PIN_EMU0);
+	u32 emu1 = omap_ctrl_readl(AM335X_PIN_EMU1);
+
+	/* If both pins are in EMU mode, nothing to do */
+	if (!(emu0 & 7) && !(emu1 & 7))
+		return;
+
+	/* Switch GPIO3_7/GPIO3_8 into EMU0/EMU1 modes respectively */
+	omap_ctrl_writel(emu0 & ~7, AM335X_PIN_EMU0);
+	omap_ctrl_writel(emu1 & ~7, AM335X_PIN_EMU1);
+
+	/*
+	 * Give pull-ups time to load the pin/PCB trace capacity.
+	 * 5 ms shall be enough to load 1 uF (would be huge capacity for these
+	 * pins) with TI-recommended 4k7 external pull-ups.
+	 */
+	mdelay(5);
+}
+
 /**
  * am33xx_restart - trigger a software restart of the SoC
  * @mode: the "reboot mode", see arch/arm/kernel/{setup,process}.c
@@ -18,6 +52,8 @@
  */
 void am33xx_restart(enum reboot_mode mode, const char *cmd)
 {
+	am33xx_advisory_1_0_36();
+
 	/* TODO: Handle cmd if necessary */
 	prm_reboot_mode = mode;
 
diff --git linux-libre-6.12-gnu/arch/arm/mach-omap2/clockdomain.h linux-libre-6.12.79-gnu/arch/arm/mach-omap2/clockdomain.h
index c36fb2721261..86a2f9e5d0ef 100644
--- linux-libre-6.12-gnu/arch/arm/mach-omap2/clockdomain.h
+++ linux-libre-6.12.79-gnu/arch/arm/mach-omap2/clockdomain.h
@@ -48,6 +48,7 @@
 #define CLKDM_NO_AUTODEPS			(1 << 4)
 #define CLKDM_ACTIVE_WITH_MPU			(1 << 5)
 #define CLKDM_MISSING_IDLE_REPORTING		(1 << 6)
+#define CLKDM_STANDBY_FORCE_WAKEUP		BIT(7)
 
 #define CLKDM_CAN_HWSUP		(CLKDM_CAN_ENABLE_AUTO | CLKDM_CAN_DISABLE_AUTO)
 #define CLKDM_CAN_SWSUP		(CLKDM_CAN_FORCE_SLEEP | CLKDM_CAN_FORCE_WAKEUP)
diff --git linux-libre-6.12-gnu/arch/arm/mach-omap2/clockdomains33xx_data.c linux-libre-6.12.79-gnu/arch/arm/mach-omap2/clockdomains33xx_data.c
index 87f4e927eb18..c05a3c07d448 100644
--- linux-libre-6.12-gnu/arch/arm/mach-omap2/clockdomains33xx_data.c
+++ linux-libre-6.12.79-gnu/arch/arm/mach-omap2/clockdomains33xx_data.c
@@ -19,7 +19,7 @@ static struct clockdomain l4ls_am33xx_clkdm = {
 	.pwrdm		= { .name = "per_pwrdm" },
 	.cm_inst	= AM33XX_CM_PER_MOD,
 	.clkdm_offs	= AM33XX_CM_PER_L4LS_CLKSTCTRL_OFFSET,
-	.flags		= CLKDM_CAN_SWSUP,
+	.flags		= CLKDM_CAN_SWSUP | CLKDM_STANDBY_FORCE_WAKEUP,
 };
 
 static struct clockdomain l3s_am33xx_clkdm = {
diff --git linux-libre-6.12-gnu/arch/arm/mach-omap2/cm33xx.c linux-libre-6.12.79-gnu/arch/arm/mach-omap2/cm33xx.c
index acdf72a541c0..a4dd42abda89 100644
--- linux-libre-6.12-gnu/arch/arm/mach-omap2/cm33xx.c
+++ linux-libre-6.12.79-gnu/arch/arm/mach-omap2/cm33xx.c
@@ -20,6 +20,9 @@
 #include "cm-regbits-34xx.h"
 #include "cm-regbits-33xx.h"
 #include "prm33xx.h"
+#if IS_ENABLED(CONFIG_SUSPEND)
+#include <linux/suspend.h>
+#endif
 
 /*
  * CLKCTRL_IDLEST_*: possible values for the CM_*_CLKCTRL.IDLEST bitfield:
@@ -328,8 +331,17 @@ static int am33xx_clkdm_clk_disable(struct clockdomain *clkdm)
 {
 	bool hwsup = false;
 
+#if IS_ENABLED(CONFIG_SUSPEND)
+	/*
+	 * In case of standby, Don't put the l4ls clk domain to sleep.
+	 * Since CM3 PM FW doesn't wake-up/enable the l4ls clk domain
+	 * upon wake-up, CM3 PM FW fails to wake-up th MPU.
+	 */
+	if (pm_suspend_target_state == PM_SUSPEND_STANDBY &&
+	    (clkdm->flags & CLKDM_STANDBY_FORCE_WAKEUP))
+		return 0;
+#endif
 	hwsup = am33xx_cm_is_clkdm_in_hwsup(clkdm->cm_inst, clkdm->clkdm_offs);
-
 	if (!hwsup && (clkdm->flags & CLKDM_CAN_FORCE_SLEEP))
 		am33xx_clkdm_sleep(clkdm);
 
diff --git linux-libre-6.12-gnu/arch/arm/mach-omap2/control.c linux-libre-6.12.79-gnu/arch/arm/mach-omap2/control.c
index 79860b23030d..eb6fc7c61b6e 100644
--- linux-libre-6.12-gnu/arch/arm/mach-omap2/control.c
+++ linux-libre-6.12.79-gnu/arch/arm/mach-omap2/control.c
@@ -732,7 +732,7 @@ int __init omap2_control_base_init(void)
  */
 int __init omap_control_init(void)
 {
-	struct device_node *np, *scm_conf;
+	struct device_node *np, *scm_conf, *clocks_node;
 	const struct of_device_id *match;
 	const struct omap_prcm_init_data *data;
 	int ret;
@@ -753,16 +753,19 @@ int __init omap_control_init(void)
 
 			if (IS_ERR(syscon)) {
 				ret = PTR_ERR(syscon);
-				goto of_node_put;
+				goto err_put_scm_conf;
 			}
 
-			if (of_get_child_by_name(scm_conf, "clocks")) {
+			clocks_node = of_get_child_by_name(scm_conf, "clocks");
+			if (clocks_node) {
+				of_node_put(clocks_node);
 				ret = omap2_clk_provider_init(scm_conf,
 							      data->index,
 							      syscon, NULL);
 				if (ret)
-					goto of_node_put;
+					goto err_put_scm_conf;
 			}
+			of_node_put(scm_conf);
 		} else {
 			/* No scm_conf found, direct access */
 			ret = omap2_clk_provider_init(np, data->index, NULL,
@@ -780,6 +783,9 @@ int __init omap_control_init(void)
 
 	return 0;
 
+err_put_scm_conf:
+	if (scm_conf)
+		of_node_put(scm_conf);
 of_node_put:
 	of_node_put(np);
 	return ret;
diff --git linux-libre-6.12-gnu/arch/arm/mach-omap2/pm33xx-core.c linux-libre-6.12.79-gnu/arch/arm/mach-omap2/pm33xx-core.c
index 6735a2e6a6be..4e591a4df6c7 100644
--- linux-libre-6.12-gnu/arch/arm/mach-omap2/pm33xx-core.c
+++ linux-libre-6.12.79-gnu/arch/arm/mach-omap2/pm33xx-core.c
@@ -387,12 +387,15 @@ static int __init amx3_idle_init(struct device_node *cpu_node, int cpu)
 		if (!state_node)
 			break;
 
-		if (!of_device_is_available(state_node))
+		if (!of_device_is_available(state_node)) {
+			of_node_put(state_node);
 			continue;
+		}
 
 		if (i == CPUIDLE_STATE_MAX) {
 			pr_warn("%s: cpuidle states reached max possible\n",
 				__func__);
+			of_node_put(state_node);
 			break;
 		}
 
@@ -402,6 +405,7 @@ static int __init amx3_idle_init(struct device_node *cpu_node, int cpu)
 			states[state_count].wfi_flags |= WFI_FLAG_WAKE_M3 |
 							 WFI_FLAG_FLUSH_CACHE;
 
+		of_node_put(state_node);
 		state_count++;
 	}
 
diff --git linux-libre-6.12-gnu/arch/arm/mach-omap2/pmic-cpcap.c linux-libre-6.12.79-gnu/arch/arm/mach-omap2/pmic-cpcap.c
index 4f31e61c0c90..9f9a20274db8 100644
--- linux-libre-6.12-gnu/arch/arm/mach-omap2/pmic-cpcap.c
+++ linux-libre-6.12.79-gnu/arch/arm/mach-omap2/pmic-cpcap.c
@@ -264,7 +264,11 @@ int __init omap4_cpcap_init(void)
 
 static int __init cpcap_late_init(void)
 {
-	omap4_vc_set_pmic_signaling(PWRDM_POWER_RET);
+	if (!of_find_compatible_node(NULL, NULL, "motorola,cpcap"))
+		return 0;
+
+	if (soc_is_omap443x() || soc_is_omap446x() || soc_is_omap447x())
+		omap4_vc_set_pmic_signaling(PWRDM_POWER_RET);
 
 	return 0;
 }
diff --git linux-libre-6.12-gnu/arch/arm/mach-rockchip/platsmp.c linux-libre-6.12.79-gnu/arch/arm/mach-rockchip/platsmp.c
index 36915a073c23..f432d22bfed8 100644
--- linux-libre-6.12-gnu/arch/arm/mach-rockchip/platsmp.c
+++ linux-libre-6.12.79-gnu/arch/arm/mach-rockchip/platsmp.c
@@ -279,11 +279,6 @@ static void __init rockchip_smp_prepare_cpus(unsigned int max_cpus)
 	}
 
 	if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9) {
-		if (rockchip_smp_prepare_sram(node)) {
-			of_node_put(node);
-			return;
-		}
-
 		/* enable the SCU power domain */
 		pmu_set_power_domain(PMU_PWRDN_SCU, true);
 
@@ -316,11 +311,19 @@ static void __init rockchip_smp_prepare_cpus(unsigned int max_cpus)
 		asm ("mrc p15, 1, %0, c9, c0, 2\n" : "=r" (l2ctlr));
 		ncores = ((l2ctlr >> 24) & 0x3) + 1;
 	}
-	of_node_put(node);
 
 	/* Make sure that all cores except the first are really off */
 	for (i = 1; i < ncores; i++)
 		pmu_set_power_domain(0 + i, false);
+
+	if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9) {
+		if (rockchip_smp_prepare_sram(node)) {
+			of_node_put(node);
+			return;
+		}
+	}
+
+	of_node_put(node);
 }
 
 static void __init rk3036_smp_prepare_cpus(unsigned int max_cpus)
diff --git linux-libre-6.12-gnu/arch/arm/mach-shmobile/headsmp.S linux-libre-6.12.79-gnu/arch/arm/mach-shmobile/headsmp.S
index a956b489b6ea..2bc7e73a8582 100644
--- linux-libre-6.12-gnu/arch/arm/mach-shmobile/headsmp.S
+++ linux-libre-6.12.79-gnu/arch/arm/mach-shmobile/headsmp.S
@@ -136,6 +136,7 @@ ENDPROC(shmobile_smp_sleep)
 	.long	shmobile_smp_arg - 1b
 
 	.bss
+	.align	2
 	.globl	shmobile_smp_mpidr
 shmobile_smp_mpidr:
 	.space	NR_CPUS * 4
diff --git linux-libre-6.12-gnu/arch/arm/mach-tegra/reset.c linux-libre-6.12.79-gnu/arch/arm/mach-tegra/reset.c
index d5c805adf7a8..ea706fac6358 100644
--- linux-libre-6.12-gnu/arch/arm/mach-tegra/reset.c
+++ linux-libre-6.12.79-gnu/arch/arm/mach-tegra/reset.c
@@ -63,7 +63,7 @@ static void __init tegra_cpu_reset_handler_enable(void)
 	BUG_ON(is_enabled);
 	BUG_ON(tegra_cpu_reset_handler_size > TEGRA_IRAM_RESET_HANDLER_SIZE);
 
-	memcpy(iram_base, (void *)__tegra_cpu_reset_handler_start,
+	memcpy_toio(iram_base, (void *)__tegra_cpu_reset_handler_start,
 			tegra_cpu_reset_handler_size);
 
 	err = call_firmware_op(set_cpu_boot_addr, 0, reset_address);
diff --git linux-libre-6.12-gnu/arch/arm/mm/ioremap.c linux-libre-6.12.79-gnu/arch/arm/mm/ioremap.c
index 794cfea9f9d4..cbf5a03d2b18 100644
--- linux-libre-6.12-gnu/arch/arm/mm/ioremap.c
+++ linux-libre-6.12.79-gnu/arch/arm/mm/ioremap.c
@@ -23,6 +23,7 @@
  */
 #include <linux/module.h>
 #include <linux/errno.h>
+#include <linux/kasan.h>
 #include <linux/mm.h>
 #include <linux/vmalloc.h>
 #include <linux/io.h>
@@ -115,16 +116,40 @@ int ioremap_page(unsigned long virt, unsigned long phys,
 }
 EXPORT_SYMBOL(ioremap_page);
 
+#ifdef CONFIG_KASAN
+static unsigned long arm_kasan_mem_to_shadow(unsigned long addr)
+{
+	return (unsigned long)kasan_mem_to_shadow((void *)addr);
+}
+#else
+static unsigned long arm_kasan_mem_to_shadow(unsigned long addr)
+{
+	return 0;
+}
+#endif
+
+static void memcpy_pgd(struct mm_struct *mm, unsigned long start,
+		       unsigned long end)
+{
+	end = ALIGN(end, PGDIR_SIZE);
+	memcpy(pgd_offset(mm, start), pgd_offset_k(start),
+	       sizeof(pgd_t) * (pgd_index(end) - pgd_index(start)));
+}
+
 void __check_vmalloc_seq(struct mm_struct *mm)
 {
 	int seq;
 
 	do {
-		seq = atomic_read(&init_mm.context.vmalloc_seq);
-		memcpy(pgd_offset(mm, VMALLOC_START),
-		       pgd_offset_k(VMALLOC_START),
-		       sizeof(pgd_t) * (pgd_index(VMALLOC_END) -
-					pgd_index(VMALLOC_START)));
+		seq = atomic_read_acquire(&init_mm.context.vmalloc_seq);
+		memcpy_pgd(mm, VMALLOC_START, VMALLOC_END);
+		if (IS_ENABLED(CONFIG_KASAN_VMALLOC)) {
+			unsigned long start =
+				arm_kasan_mem_to_shadow(VMALLOC_START);
+			unsigned long end =
+				arm_kasan_mem_to_shadow(VMALLOC_END);
+			memcpy_pgd(mm, start, end);
+		}
 		/*
 		 * Use a store-release so that other CPUs that observe the
 		 * counter's new value are guaranteed to see the results of the
@@ -490,7 +515,5 @@ void __init early_ioremap_init(void)
 bool arch_memremap_can_ram_remap(resource_size_t offset, size_t size,
 				 unsigned long flags)
 {
-	unsigned long pfn = PHYS_PFN(offset);
-
-	return memblock_is_map_memory(pfn);
+	return memblock_is_map_memory(offset);
 }
diff --git linux-libre-6.12-gnu/arch/arm/mm/physaddr.c linux-libre-6.12.79-gnu/arch/arm/mm/physaddr.c
index 3f263c840ebc..1a37ebfacbba 100644
--- linux-libre-6.12-gnu/arch/arm/mm/physaddr.c
+++ linux-libre-6.12.79-gnu/arch/arm/mm/physaddr.c
@@ -38,7 +38,7 @@ static inline bool __virt_addr_valid(unsigned long x)
 phys_addr_t __virt_to_phys(unsigned long x)
 {
 	WARN(!__virt_addr_valid(x),
-	     "virt_to_phys used for non-linear address: %pK (%pS)\n",
+	     "virt_to_phys used for non-linear address: %px (%pS)\n",
 	     (void *)x, (void *)x);
 
 	return __virt_to_phys_nodebug(x);
diff --git linux-libre-6.12-gnu/arch/arm64/Kbuild linux-libre-6.12.79-gnu/arch/arm64/Kbuild
index 5bfbf7d79c99..d876bc0e5421 100644
--- linux-libre-6.12-gnu/arch/arm64/Kbuild
+++ linux-libre-6.12.79-gnu/arch/arm64/Kbuild
@@ -1,4 +1,8 @@
 # SPDX-License-Identifier: GPL-2.0-only
+
+# Branch profiling isn't noinstr-safe
+subdir-ccflags-$(CONFIG_TRACE_BRANCH_PROFILING) += -DDISABLE_BRANCH_PROFILING
+
 obj-y			+= kernel/ mm/ net/
 obj-$(CONFIG_KVM)	+= kvm/
 obj-$(CONFIG_XEN)	+= xen/
diff --git linux-libre-6.12-gnu/arch/arm64/Kconfig linux-libre-6.12.79-gnu/arch/arm64/Kconfig
index 22f8a7bca6d2..f487c5e21e2f 100644
--- linux-libre-6.12-gnu/arch/arm64/Kconfig
+++ linux-libre-6.12.79-gnu/arch/arm64/Kconfig
@@ -146,6 +146,7 @@ config ARM64
 	select GENERIC_IDLE_POLL_SETUP
 	select GENERIC_IOREMAP
 	select GENERIC_IRQ_IPI
+	select GENERIC_IRQ_KEXEC_CLEAR_VM_FORWARD
 	select GENERIC_IRQ_PROBE
 	select GENERIC_IRQ_SHOW
 	select GENERIC_IRQ_SHOW_LEVEL
@@ -216,6 +217,7 @@ config ARM64
 	select HAVE_FTRACE_MCOUNT_RECORD
 	select HAVE_FUNCTION_TRACER
 	select HAVE_FUNCTION_ERROR_INJECTION
+	select HAVE_FUNCTION_GRAPH_FREGS
 	select HAVE_FUNCTION_GRAPH_TRACER
 	select HAVE_FUNCTION_GRAPH_RETVAL
 	select HAVE_GCC_PLUGINS
@@ -322,9 +324,9 @@ config ARCH_MMAP_RND_BITS_MAX
 	default 24 if ARM64_VA_BITS=39
 	default 27 if ARM64_VA_BITS=42
 	default 30 if ARM64_VA_BITS=47
-	default 29 if ARM64_VA_BITS=48 && ARM64_64K_PAGES
-	default 31 if ARM64_VA_BITS=48 && ARM64_16K_PAGES
-	default 33 if ARM64_VA_BITS=48
+	default 29 if (ARM64_VA_BITS=48 || ARM64_VA_BITS=52) && ARM64_64K_PAGES
+	default 31 if (ARM64_VA_BITS=48 || ARM64_VA_BITS=52) && ARM64_16K_PAGES
+	default 33 if (ARM64_VA_BITS=48 || ARM64_VA_BITS=52)
 	default 14 if ARM64_64K_PAGES
 	default 16 if ARM64_16K_PAGES
 	default 18
@@ -1111,6 +1113,7 @@ config ARM64_ERRATUM_3194386
 	  * ARM Neoverse-V1 erratum 3324341
 	  * ARM Neoverse V2 erratum 3324336
 	  * ARM Neoverse-V3 erratum 3312417
+	  * ARM Neoverse-V3AE erratum 3312417
 
 	  On affected cores "MSR SSBS, #0" instructions may not affect
 	  subsequent speculative instructions, which may permit unexepected
@@ -1232,6 +1235,17 @@ config HISILICON_ERRATUM_161600802
 
 	  If unsure, say Y.
 
+config HISILICON_ERRATUM_162100801
+	bool "Hip09 162100801 erratum support"
+	default y
+	help
+	  When enabling GICv4.1 in hip09, VMAPP will fail to clear some caches
+	  during unmapping operation, which will cause some vSGIs lost.
+	  To fix the issue, invalidate related vPE cache through GICR_INVALLR
+	  after VMOVP.
+
+	  If unsure, say Y.
+
 config QCOM_FALKOR_ERRATUM_1003
 	bool "Falkor E1003: Incorrect translation due to ASID change"
 	default y
diff --git linux-libre-6.12-gnu/arch/arm64/Makefile linux-libre-6.12.79-gnu/arch/arm64/Makefile
index 9efd3f37c2fd..88029d38b3c6 100644
--- linux-libre-6.12-gnu/arch/arm64/Makefile
+++ linux-libre-6.12.79-gnu/arch/arm64/Makefile
@@ -48,7 +48,11 @@ KBUILD_CFLAGS	+= $(CC_FLAGS_NO_FPU) \
 KBUILD_CFLAGS	+= $(call cc-disable-warning, psabi)
 KBUILD_AFLAGS	+= $(compat_vdso)
 
+ifeq ($(call rustc-min-version, 108500),y)
+KBUILD_RUSTFLAGS += --target=aarch64-unknown-none-softfloat
+else
 KBUILD_RUSTFLAGS += --target=aarch64-unknown-none -Ctarget-feature="-neon"
+endif
 
 KBUILD_CFLAGS	+= $(call cc-option,-mabi=lp64)
 KBUILD_AFLAGS	+= $(call cc-option,-mabi=lp64)
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts linux-libre-6.12.79-gnu/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
index 379c2c8466f5..86d44349e095 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
@@ -390,6 +390,8 @@
 &tcon0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&lcd_rgb666_pins>;
+	assigned-clocks = <&ccu CLK_TCON0>;
+	assigned-clock-parents = <&ccu CLK_PLL_VIDEO0_2X>;
 
 	status = "okay";
 };
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
index 6eab61a12cd8..b844759f52c0 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
@@ -212,6 +212,9 @@
 		interrupts = <7 5 IRQ_TYPE_EDGE_RISING>; /* PH5 */
 		vdd-supply = <&reg_dldo1>;
 		vddio-supply = <&reg_dldo1>;
+		mount-matrix = "0", "1", "0",
+			       "-1", "0", "0",
+			       "0", "0", "1";
 	};
 };
 
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts linux-libre-6.12.79-gnu/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts
index b407e1dd08a7..ec055510af8b 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts
@@ -369,6 +369,8 @@
 &tcon0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&lcd_rgb666_pins>;
+	assigned-clocks = <&ccu CLK_TCON0>;
+	assigned-clock-parents = <&ccu CLK_PLL_VIDEO0_2X>;
 
 	status = "okay";
 };
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
index a5c3920e0f04..0fecf0abb204 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -445,6 +445,8 @@
 			clock-names = "ahb", "tcon-ch0";
 			clock-output-names = "tcon-data-clock";
 			#clock-cells = <0>;
+			assigned-clocks = <&ccu CLK_TCON0>;
+			assigned-clock-parents = <&ccu CLK_PLL_MIPI>;
 			resets = <&ccu RST_BUS_TCON0>, <&ccu RST_BUS_LVDS>;
 			reset-names = "lcd", "lvds";
 
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts linux-libre-6.12.79-gnu/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
index 3be1e8c2fdb9..1012103df25f 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
@@ -151,28 +151,12 @@
 	vcc-pg-supply = <&reg_aldo1>;
 };
 
-&r_ir {
-	linux,rc-map-name = "rc-beelink-gs1";
-	status = "okay";
-};
-
-&r_pio {
-	/*
-	 * FIXME: We can't add that supply for now since it would
-	 * create a circular dependency between pinctrl, the regulator
-	 * and the RSB Bus.
-	 *
-	 * vcc-pl-supply = <&reg_aldo1>;
-	 */
-	vcc-pm-supply = <&reg_aldo1>;
-};
-
-&r_rsb {
+&r_i2c {
 	status = "okay";
 
-	axp805: pmic@745 {
+	axp805: pmic@36 {
 		compatible = "x-powers,axp805", "x-powers,axp806";
-		reg = <0x745>;
+		reg = <0x36>;
 		interrupt-parent = <&r_intc>;
 		interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
@@ -290,6 +274,22 @@
 	};
 };
 
+&r_ir {
+	linux,rc-map-name = "rc-beelink-gs1";
+	status = "okay";
+};
+
+&r_pio {
+	/*
+	 * PL0 and PL1 are used for PMIC I2C
+	 * don't enable the pl-supply else
+	 * it will fail at boot
+	 *
+	 * vcc-pl-supply = <&reg_aldo1>;
+	 */
+	vcc-pm-supply = <&reg_aldo1>;
+};
+
 &spdif {
 	pinctrl-names = "default";
 	pinctrl-0 = <&spdif_tx_pin>;
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts linux-libre-6.12.79-gnu/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
index 6c3bfe3d09d9..14cc99b21622 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
@@ -175,16 +175,12 @@
 	vcc-pg-supply = <&reg_vcc_wifi_io>;
 };
 
-&r_ir {
-	status = "okay";
-};
-
-&r_rsb {
+&r_i2c {
 	status = "okay";
 
-	axp805: pmic@745 {
+	axp805: pmic@36 {
 		compatible = "x-powers,axp805", "x-powers,axp806";
-		reg = <0x745>;
+		reg = <0x36>;
 		interrupt-parent = <&r_intc>;
 		interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
@@ -295,6 +291,10 @@
 	};
 };
 
+&r_ir {
+	status = "okay";
+};
+
 &rtc {
 	clocks = <&ext_osc32k>;
 };
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi
index 13b07141c334..bab0f63dcc5b 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi
@@ -112,20 +112,12 @@
 	vcc-pg-supply = <&reg_aldo1>;
 };
 
-&r_ir {
-	status = "okay";
-};
-
-&r_pio {
-	vcc-pm-supply = <&reg_bldo3>;
-};
-
-&r_rsb {
+&r_i2c {
 	status = "okay";
 
-	axp805: pmic@745 {
+	axp805: pmic@36 {
 		compatible = "x-powers,axp805", "x-powers,axp806";
-		reg = <0x745>;
+		reg = <0x36>;
 		interrupt-parent = <&r_intc>;
 		interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
@@ -240,6 +232,14 @@
 	};
 };
 
+&r_ir {
+	status = "okay";
+};
+
+&r_pio {
+	vcc-pm-supply = <&reg_bldo3>;
+};
+
 &rtc {
 	clocks = <&ext_osc32k>;
 };
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
index d0cda759c25d..edd92500ebc9 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
@@ -570,6 +570,10 @@
 				no-sd;
 				resets = <&reset RESET_SD_EMMC_A>;
 				status = "disabled";
+
+				assigned-clocks = <&clkc_periphs CLKID_SD_EMMC_A>;
+				assigned-clock-rates = <24000000>;
+
 			};
 
 			sd: mmc@8a000 {
@@ -585,6 +589,9 @@
 				no-sdio;
 				resets = <&reset RESET_SD_EMMC_B>;
 				status = "disabled";
+
+				assigned-clocks = <&clkc_periphs CLKID_SD_EMMC_B>;
+				assigned-clock-rates = <24000000>;
 			};
 
 			nand: nand-controller@8d000 {
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/amlogic/meson-axg.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index e9b22868983d..4717c9666f2a 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -1923,6 +1923,9 @@
 					<&clkc CLKID_FCLK_DIV2>;
 				clock-names = "core", "clkin0", "clkin1";
 				resets = <&reset RESET_SD_EMMC_B>;
+
+				assigned-clocks = <&clkc CLKID_SD_EMMC_B_CLK0>;
+				assigned-clock-rates = <24000000>;
 			};
 
 			sd_emmc_c: mmc@7000 {
@@ -1935,6 +1938,9 @@
 					<&clkc CLKID_FCLK_DIV2>;
 				clock-names = "core", "clkin0", "clkin1";
 				resets = <&reset RESET_SD_EMMC_C>;
+
+				assigned-clocks = <&clkc CLKID_SD_EMMC_C_CLK0>;
+				assigned-clock-rates = <24000000>;
 			};
 
 			nfc: nand-controller@7800 {
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
index d08c97797010..e0ddb28a34c2 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
@@ -2408,6 +2408,9 @@
 				 <&clkc CLKID_FCLK_DIV2>;
 			clock-names = "core", "clkin0", "clkin1";
 			resets = <&reset RESET_SD_EMMC_A>;
+
+			assigned-clocks = <&clkc CLKID_SD_EMMC_A_CLK0>;
+			assigned-clock-rates = <24000000>;
 		};
 
 		sd_emmc_b: mmc@ffe05000 {
@@ -2420,6 +2423,9 @@
 				 <&clkc CLKID_FCLK_DIV2>;
 			clock-names = "core", "clkin0", "clkin1";
 			resets = <&reset RESET_SD_EMMC_B>;
+
+			assigned-clocks = <&clkc CLKID_SD_EMMC_B_CLK0>;
+			assigned-clock-rates = <24000000>;
 		};
 
 		sd_emmc_c: mmc@ffe07000 {
@@ -2432,6 +2438,9 @@
 				 <&clkc CLKID_FCLK_DIV2>;
 			clock-names = "core", "clkin0", "clkin1";
 			resets = <&reset RESET_SD_EMMC_C>;
+
+			assigned-clocks = <&clkc CLKID_SD_EMMC_C_CLK0>;
+			assigned-clock-rates = <24000000>;
 		};
 
 		usb: usb@ffe09000 {
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-dreambox.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-dreambox.dtsi
index de35fa2d7a6d..8e3e3354ed67 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-dreambox.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-dreambox.dtsi
@@ -116,6 +116,10 @@
 	status = "okay";
 };
 
+&clkc_audio {
+	status = "okay";
+};
+
 &frddr_a {
 	status = "okay";
 };
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
index ed00e67e6923..851ae89dd17f 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
@@ -799,6 +799,9 @@
 		 <&clkc CLKID_FCLK_DIV2>;
 	clock-names = "core", "clkin0", "clkin1";
 	resets = <&reset RESET_SD_EMMC_A>;
+
+	assigned-clocks = <&clkc CLKID_SD_EMMC_A_CLK0>;
+	assigned-clock-rates = <24000000>;
 };
 
 &sd_emmc_b {
@@ -807,6 +810,9 @@
 		 <&clkc CLKID_FCLK_DIV2>;
 	clock-names = "core", "clkin0", "clkin1";
 	resets = <&reset RESET_SD_EMMC_B>;
+
+	assigned-clocks = <&clkc CLKID_SD_EMMC_B_CLK0>;
+	assigned-clock-rates = <24000000>;
 };
 
 &sd_emmc_c {
@@ -815,6 +821,9 @@
 		 <&clkc CLKID_FCLK_DIV2>;
 	clock-names = "core", "clkin0", "clkin1";
 	resets = <&reset RESET_SD_EMMC_C>;
+
+	assigned-clocks = <&clkc CLKID_SD_EMMC_C_CLK0>;
+	assigned-clock-rates = <24000000>;
 };
 
 &simplefb_hdmi {
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
index f58d1790de1c..f7fafebafd80 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
@@ -869,6 +869,9 @@
 		 <&clkc CLKID_FCLK_DIV2>;
 	clock-names = "core", "clkin0", "clkin1";
 	resets = <&reset RESET_SD_EMMC_A>;
+
+	assigned-clocks = <&clkc CLKID_SD_EMMC_A_CLK0>;
+	assigned-clock-rates = <24000000>;
 };
 
 &sd_emmc_b {
@@ -877,6 +880,9 @@
 		 <&clkc CLKID_FCLK_DIV2>;
 	clock-names = "core", "clkin0", "clkin1";
 	resets = <&reset RESET_SD_EMMC_B>;
+
+	assigned-clocks = <&clkc CLKID_SD_EMMC_B_CLK0>;
+	assigned-clock-rates = <24000000>;
 };
 
 &sd_emmc_c {
@@ -885,6 +891,9 @@
 		 <&clkc CLKID_FCLK_DIV2>;
 	clock-names = "core", "clkin0", "clkin1";
 	resets = <&reset RESET_SD_EMMC_C>;
+
+	assigned-clocks = <&clkc CLKID_SD_EMMC_C_CLK0>;
+	assigned-clock-rates = <24000000>;
 };
 
 &simplefb_hdmi {
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/amlogic/meson-s4.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
index 957577d986c0..7326aaa8d0ed 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
@@ -814,13 +814,16 @@
 			reg = <0x0 0xfe088000 0x0 0x800>;
 			interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clkc_periphs CLKID_SDEMMC_A>,
-				 <&xtal>,
+				 <&clkc_periphs CLKID_SD_EMMC_A>,
 				 <&clkc_pll CLKID_FCLK_DIV2>;
 			clock-names = "core", "clkin0", "clkin1";
 			resets = <&reset RESET_SD_EMMC_A>;
 			cap-sdio-irq;
 			keep-power-in-suspend;
 			status = "disabled";
+
+			assigned-clocks = <&clkc_periphs CLKID_SD_EMMC_A>;
+			assigned-clock-rates = <24000000>;
 		};
 
 		sd: mmc@fe08a000 {
@@ -833,6 +836,9 @@
 			clock-names = "core", "clkin0", "clkin1";
 			resets = <&reset RESET_SD_EMMC_B>;
 			status = "disabled";
+
+			assigned-clocks = <&clkc_periphs CLKID_SD_EMMC_B>;
+			assigned-clock-rates = <24000000>;
 		};
 
 		emmc: mmc@fe08c000 {
@@ -840,13 +846,16 @@
 			reg = <0x0 0xfe08c000 0x0 0x800>;
 			interrupts = <GIC_SPI 178 IRQ_TYPE_EDGE_RISING>;
 			clocks = <&clkc_periphs CLKID_NAND>,
-				 <&xtal>,
+				 <&clkc_periphs CLKID_SD_EMMC_C>,
 				 <&clkc_pll CLKID_FCLK_DIV2>;
 			clock-names = "core", "clkin0", "clkin1";
 			resets = <&reset RESET_NAND_EMMC>;
 			no-sdio;
 			no-sd;
 			status = "disabled";
+
+			assigned-clocks = <&clkc_periphs CLKID_SD_EMMC_C>;
+			assigned-clock-rates = <24000000>;
 		};
 	};
 };
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/apple/t8103-j457.dts linux-libre-6.12.79-gnu/arch/arm64/boot/dts/apple/t8103-j457.dts
index 152f95fd49a2..7089ccf3ce55 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/apple/t8103-j457.dts
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/apple/t8103-j457.dts
@@ -21,6 +21,14 @@
 	};
 };
 
+/*
+ * Adjust pcie0's iommu-map to account for the disabled port01.
+ */
+&pcie0 {
+	iommu-map = <0x100 &pcie0_dart_0 1 1>,
+			<0x200 &pcie0_dart_2 1 1>;
+};
+
 &bluetooth0 {
 	brcm,board-type = "apple,santorini";
 };
@@ -36,10 +44,10 @@
  */
 
 &port02 {
-	bus-range = <3 3>;
+	bus-range = <2 2>;
 	status = "okay";
 	ethernet0: ethernet@0,0 {
-		reg = <0x30000 0x0 0x0 0x0 0x0>;
+		reg = <0x20000 0x0 0x0 0x0 0x0>;
 		/* To be filled by the loader */
 		local-mac-address = [00 10 18 00 00 00];
 	};
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/apple/t8103-jxxx.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/apple/t8103-jxxx.dtsi
index 5988a4eb6efa..cb78ce7af0b3 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/apple/t8103-jxxx.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/apple/t8103-jxxx.dtsi
@@ -71,7 +71,7 @@
  */
 &port00 {
 	bus-range = <1 1>;
-	wifi0: network@0,0 {
+	wifi0: wifi@0,0 {
 		compatible = "pci14e4,4425";
 		reg = <0x10000 0x0 0x0 0x0 0x0>;
 		/* To be filled by the loader */
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/apple/t8112-j473.dts linux-libre-6.12.79-gnu/arch/arm64/boot/dts/apple/t8112-j473.dts
index 06fe257f08be..4ae1ce919daf 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/apple/t8112-j473.dts
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/apple/t8112-j473.dts
@@ -21,6 +21,25 @@
 	};
 };
 
+/*
+ * Keep the power-domains used for the HDMI port on.
+ */
+&framebuffer0 {
+	power-domains = <&ps_dispext_cpu0>, <&ps_dptx_ext_phy>;
+};
+
+/*
+ * The M2 Mac mini uses dispext for the HDMI output so it's not necessary to
+ * keep disp0 power-domains always-on.
+ */
+&ps_disp0_sys {
+	/delete-property/ apple,always-on;
+};
+
+&ps_disp0_fe {
+	/delete-property/ apple,always-on;
+};
+
 /*
  * Force the bus number assignments so that we can declare some of the
  * on-board devices and properties that are populated by the bootloader
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/broadcom/bcm2712.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/broadcom/bcm2712.dtsi
index 6e5a984c1d4e..209f99b1ceae 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/broadcom/bcm2712.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/broadcom/bcm2712.dtsi
@@ -67,7 +67,7 @@
 			l2_cache_l0: l2-cache-l0 {
 				compatible = "cache";
 				cache-size = <0x80000>;
-				cache-line-size = <128>;
+				cache-line-size = <64>;
 				cache-sets = <1024>; //512KiB(size)/64(line-size)=8192ways/8-way set
 				cache-level = <2>;
 				cache-unified;
@@ -91,7 +91,7 @@
 			l2_cache_l1: l2-cache-l1 {
 				compatible = "cache";
 				cache-size = <0x80000>;
-				cache-line-size = <128>;
+				cache-line-size = <64>;
 				cache-sets = <1024>; //512KiB(size)/64(line-size)=8192ways/8-way set
 				cache-level = <2>;
 				cache-unified;
@@ -115,7 +115,7 @@
 			l2_cache_l2: l2-cache-l2 {
 				compatible = "cache";
 				cache-size = <0x80000>;
-				cache-line-size = <128>;
+				cache-line-size = <64>;
 				cache-sets = <1024>; //512KiB(size)/64(line-size)=8192ways/8-way set
 				cache-level = <2>;
 				cache-unified;
@@ -139,7 +139,7 @@
 			l2_cache_l3: l2-cache-l3 {
 				compatible = "cache";
 				cache-size = <0x80000>;
-				cache-line-size = <128>;
+				cache-line-size = <64>;
 				cache-sets = <1024>; //512KiB(size)/64(line-size)=8192ways/8-way set
 				cache-level = <2>;
 				cache-unified;
@@ -232,7 +232,7 @@
 			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clk_uart>, <&clk_vpu>;
 			clock-names = "uartclk", "apb_pclk";
-			arm,primecell-periphid = <0x00241011>;
+			arm,primecell-periphid = <0x00341011>;
 			status = "disabled";
 		};
 
@@ -263,6 +263,9 @@
 			      <0x7fffc000 0x2000>,
 			      <0x7fffe000 0x2000>;
 			interrupt-controller;
+			#address-cells = <0>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) |
+					IRQ_TYPE_LEVEL_HIGH)>;
 			#interrupt-cells = <3>;
 		};
 	};
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/exynos/google/gs101.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/exynos/google/gs101.dtsi
index 302c5beb224a..d03987cc4370 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/exynos/google/gs101.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/exynos/google/gs101.dtsi
@@ -155,6 +155,7 @@
 				idle-state-name = "c2";
 				compatible = "arm,idle-state";
 				arm,psci-suspend-param = <0x0010000>;
+				local-timer-stop;
 				entry-latency-us = <70>;
 				exit-latency-us = <160>;
 				min-residency-us = <2000>;
@@ -164,6 +165,7 @@
 				idle-state-name = "c2";
 				compatible = "arm,idle-state";
 				arm,psci-suspend-param = <0x0010000>;
+				local-timer-stop;
 				entry-latency-us = <150>;
 				exit-latency-us = <190>;
 				min-residency-us = <2500>;
@@ -173,6 +175,7 @@
 				idle-state-name = "c2";
 				compatible = "arm,idle-state";
 				arm,psci-suspend-param = <0x0010000>;
+				local-timer-stop;
 				entry-latency-us = <235>;
 				exit-latency-us = <220>;
 				min-residency-us = <3500>;
@@ -1357,6 +1360,7 @@
 				 <&cmu_hsi2 CLK_GOUT_HSI2_SYSREG_HSI2_PCLK>;
 			clock-names = "core_clk", "sclk_unipro_main", "fmp",
 				      "aclk", "pclk", "sysreg";
+			dma-coherent;
 			freq-table-hz = <0 0>, <0 0>, <0 0>, <0 0>, <0 0>, <0 0>;
 			pinctrl-0 = <&ufs_rst_n &ufs_refclk_out>;
 			pinctrl-names = "default";
@@ -1386,9 +1390,9 @@
 			clock-names = "oscclk";
 		};
 
-		sysreg_apm: syscon@174204e0 {
+		sysreg_apm: syscon@17420000 {
 			compatible = "google,gs101-apm-sysreg", "syscon";
-			reg = <0x174204e0 0x1000>;
+			reg = <0x17420000 0x10000>;
 		};
 
 		pmu_system_controller: system-controller@17460000 {
@@ -1451,6 +1455,7 @@
 			/* TODO: update once support for this CMU exists */
 			clocks = <0>;
 			clock-names = "pclk";
+			status = "disabled";
 		};
 
 		cmu_top: clock-controller@1e080000 {
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index 0baf256b4400..983b2f0e8797 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -687,11 +687,12 @@
 		};
 
 		wdog0: watchdog@2ad0000 {
-			compatible = "fsl,imx21-wdt";
+			compatible = "fsl,ls1046a-wdt", "fsl,imx21-wdt";
 			reg = <0x0 0x2ad0000 0x0 0x10000>;
 			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(2)>;
+			big-endian;
 		};
 
 		edma0: dma-controller@2c00000 {
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi
index 1e02b04494e9..ed0a2c17d128 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi
@@ -27,8 +27,8 @@
 		compatible = "nxp,imx8dxl-dwmac-eqos", "snps,dwmac-5.10a";
 		reg = <0x5b050000 0x10000>;
 		interrupt-parent = <&gic>;
-		interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "macirq", "eth_wake_irq";
 		clocks = <&eqos_lpcg IMX_LPCG_CLK_4>,
 			 <&eqos_lpcg IMX_LPCG_CLK_6>,
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/freescale/imx8mm-beacon-kit.dts linux-libre-6.12.79-gnu/arch/arm64/boot/dts/freescale/imx8mm-beacon-kit.dts
index 97ff1ddd6318..734a75198f06 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/freescale/imx8mm-beacon-kit.dts
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/freescale/imx8mm-beacon-kit.dts
@@ -124,6 +124,7 @@
 	assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
 	assigned-clock-rates = <24576000>;
 	#sound-dai-cells = <0>;
+	fsl,sai-mclk-direction-output;
 	status = "okay";
 };
 
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
index 62ed64663f49..c0f00835e47d 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
@@ -233,6 +233,7 @@
 	rtc: rtc@51 {
 		compatible = "nxp,pcf85263";
 		reg = <0x51>;
+		quartz-load-femtofarads = <12500>;
 	};
 };
 
@@ -285,6 +286,8 @@
 	pinctrl-0 = <&pinctrl_usdhc3>;
 	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
 	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	assigned-clocks = <&clk IMX8MM_CLK_USDHC3>;
+	assigned-clock-rates = <400000000>;
 	bus-width = <8>;
 	non-removable;
 	status = "okay";
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi
index 752caa38eb03..266038fbbef9 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi
@@ -351,17 +351,6 @@
 		>;
 	};
 
-	pinctrl_usdhc1: usdhc1grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x190
-			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d0
-			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d0
-			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d0
-			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d0
-			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d0
-		>;
-	};
-
 	pinctrl_usdhc2: usdhc2grp {
 		fsl,pins = <
 			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x190
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/freescale/imx8mm-verdin-dahlia.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/freescale/imx8mm-verdin-dahlia.dtsi
index ce20de259805..3d0b14968131 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/freescale/imx8mm-verdin-dahlia.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/freescale/imx8mm-verdin-dahlia.dtsi
@@ -16,10 +16,10 @@
 			"Headphone Jack", "HPOUTR",
 			"IN2L", "Line In Jack",
 			"IN2R", "Line In Jack",
-			"Headphone Jack", "MICBIAS",
-			"IN1L", "Headphone Jack";
+			"Microphone Jack", "MICBIAS",
+			"IN1L", "Microphone Jack";
 		simple-audio-card,widgets =
-			"Microphone", "Headphone Jack",
+			"Microphone", "Microphone Jack",
 			"Headphone", "Headphone Jack",
 			"Line", "Line In Jack";
 
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
index 5fa395914191..c579a45273f0 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
@@ -162,7 +162,20 @@
 		regulator-max-microvolt = <3300000>;
 		regulator-min-microvolt = <3300000>;
 		regulator-name = "+V3.3_SD";
-		startup-delay-us = <2000>;
+		startup-delay-us = <20000>;
+	};
+
+	reg_usdhc2_vqmmc: regulator-usdhc2-vqmmc {
+		compatible = "regulator-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usdhc2_vsel>;
+		gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <1800000>;
+		states = <1800000 0x1>,
+			 <3300000 0x0>;
+		regulator-name = "PMIC_USDHC_VSELECT";
+		vin-supply = <&reg_nvcc_sd>;
 	};
 
 	reserved-memory {
@@ -290,7 +303,7 @@
 			  "SODIMM_19",
 			  "",
 			  "",
-			  "",
+			  "PMIC_USDHC_VSELECT",
 			  "",
 			  "",
 			  "",
@@ -471,6 +484,7 @@
 			};
 
 			reg_nvcc_sd: LDO5 {
+				regulator-always-on;
 				regulator-max-microvolt = <3300000>;
 				regulator-min-microvolt = <1800000>;
 				regulator-name = "On-module +V3.3_1.8_SD (LDO5)";
@@ -801,6 +815,7 @@
 	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_cd>;
 	pinctrl-3 = <&pinctrl_usdhc2_sleep>, <&pinctrl_usdhc2_cd_sleep>;
 	vmmc-supply = <&reg_usdhc2_vmmc>;
+	vqmmc-supply = <&reg_usdhc2_vqmmc>;
 };
 
 &wdog1 {
@@ -1222,13 +1237,17 @@
 			<MX8MM_IOMUXC_NAND_CLE_GPIO3_IO5		0x6>;	/* SODIMM 76 */
 	};
 
+	pinctrl_usdhc2_vsel: usdhc2vselgrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_GPIO1_IO04_GPIO1_IO4	0x10>; /* PMIC_USDHC_VSELECT */
+	};
+
 	/*
 	 * Note: Due to ERR050080 we use discrete external on-module resistors pulling-up to the
 	 * on-module +V3.3_1.8_SD (LDO5) rail and explicitly disable the internal pull-ups here.
 	 */
 	pinctrl_usdhc2: usdhc2grp {
 		fsl,pins =
-			<MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x10>,
 			<MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x90>,	/* SODIMM 78 */
 			<MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x90>,	/* SODIMM 74 */
 			<MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x90>,	/* SODIMM 80 */
@@ -1239,7 +1258,6 @@
 
 	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
 		fsl,pins =
-			<MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x10>,
 			<MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x94>,
 			<MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x94>,
 			<MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x94>,
@@ -1250,7 +1268,6 @@
 
 	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
 		fsl,pins =
-			<MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x10>,
 			<MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x96>,
 			<MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x96>,
 			<MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x96>,
@@ -1262,7 +1279,6 @@
 	/* Avoid backfeeding with removed card power */
 	pinctrl_usdhc2_sleep: usdhc2slpgrp {
 		fsl,pins =
-			<MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x0>,
 			<MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x0>,
 			<MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x0>,
 			<MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x0>,
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/freescale/imx8mn-beacon-kit.dts linux-libre-6.12.79-gnu/arch/arm64/boot/dts/freescale/imx8mn-beacon-kit.dts
index 1df5ceb11387..37fc5ed98d7f 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/freescale/imx8mn-beacon-kit.dts
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/freescale/imx8mn-beacon-kit.dts
@@ -124,6 +124,7 @@
 	assigned-clock-parents = <&clk IMX8MN_AUDIO_PLL1_OUT>;
 	assigned-clock-rates = <24576000>;
 	#sound-dai-cells = <0>;
+	fsl,sai-mclk-direction-output;
 	status = "okay";
 };
 
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi
index 2a64115eebf1..353d0c9ff35c 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi
@@ -242,6 +242,7 @@
 	rtc: rtc@51 {
 		compatible = "nxp,pcf85263";
 		reg = <0x51>;
+		quartz-load-femtofarads = <12500>;
 	};
 };
 
@@ -296,6 +297,8 @@
 	pinctrl-0 = <&pinctrl_usdhc3>;
 	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
 	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	assigned-clocks = <&clk IMX8MN_CLK_USDHC3>;
+	assigned-clock-rates = <400000000>;
 	bus-width = <8>;
 	non-removable;
 	status = "okay";
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx-usbotg.dtso linux-libre-6.12.79-gnu/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx-usbotg.dtso
index 96db07fc9bec..1f2a0fe70a0a 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx-usbotg.dtso
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx-usbotg.dtso
@@ -29,12 +29,37 @@
 	};
 };
 
+/*
+ * rst_usb_hub_hog and sel_usb_hub_hog have property 'output-high',
+ * dt overlay don't support /delete-property/. Both 'output-low' and
+ * 'output-high' will be exist under hog nodes if overlay file set
+ * 'output-low'. Workaround is disable these hog and create new hog with
+ * 'output-low'.
+ */
+
 &rst_usb_hub_hog {
-	output-low;
+	status = "disabled";
+};
+
+&expander0 {
+	rst-usb-low-hub-hog {
+		gpio-hog;
+		gpios = <13 0>;
+		output-low;
+		line-name = "RST_USB_HUB#";
+	};
 };
 
 &sel_usb_hub_hog {
-	output-low;
+	status = "disabled";
+};
+
+&gpio2 {
+	sel-usb-low-hub-hog {
+		gpio-hog;
+		gpios = <1 GPIO_ACTIVE_HIGH>;
+		output-low;
+	};
 };
 
 &usbotg1 {
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/freescale/imx8mp-beacon-som.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/freescale/imx8mp-beacon-som.dtsi
index 15f7ab58db36..88561df70d03 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/freescale/imx8mp-beacon-som.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/freescale/imx8mp-beacon-som.dtsi
@@ -257,6 +257,7 @@
 	rtc: rtc@51 {
 		compatible = "nxp,pcf85263";
 		reg = <0x51>;
+		quartz-load-femtofarads = <12500>;
 	};
 };
 
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts linux-libre-6.12.79-gnu/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts
index d0fc5977258f..16078ff60ef0 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts
@@ -555,6 +555,7 @@
 	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
 	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&reg_usdhc2_vmmc>;
+	vqmmc-supply = <&ldo5>;
 	bus-width = <4>;
 	status = "okay";
 };
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi
index a90e28c07e3f..1141b26d6b6f 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi
@@ -113,6 +113,7 @@
 		ethphy0f: ethernet-phy@1 { /* SMSC LAN8740Ai */
 			compatible = "ethernet-phy-id0007.c110",
 				     "ethernet-phy-ieee802.3-c22";
+			clocks = <&clk IMX8MP_CLK_ENET_QOS>;
 			interrupt-parent = <&gpio3>;
 			interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
 			pinctrl-0 = <&pinctrl_ethphy0>;
@@ -609,6 +610,7 @@
 	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
 	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&reg_usdhc2_vmmc>;
+	vqmmc-supply = <&ldo5>;
 	bus-width = <4>;
 	status = "okay";
 };
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mp-ras314.dts linux-libre-6.12.79-gnu/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mp-ras314.dts
index d7fd9d36f824..a122f2ed5f53 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mp-ras314.dts
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mp-ras314.dts
@@ -467,6 +467,10 @@
 	status = "okay";
 };
 
+&reg_usdhc2_vqmmc {
+	status = "okay";
+};
+
 &sai5 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_sai5>;
@@ -700,7 +704,7 @@
 		fsl,pins = <MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL	0x400001c2>,
 			   <MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA	0x400001c2>,
 			   <MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD	0x40000010>,
-			   <MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC	0x40000154>;
+			   <MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC	0x40000030>;
 	};
 
 	pinctrl_gpt1: gpt1grp {
@@ -876,8 +880,7 @@
 			   <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d2>,
 			   <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d2>,
 			   <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d2>,
-			   <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d2>,
-			   <MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc0>;
+			   <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d2>;
 	};
 
 	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
@@ -886,8 +889,7 @@
 			   <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d4>,
 			   <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d4>,
 			   <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d4>,
-			   <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d4>,
-			   <MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc0>;
+			   <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d4>;
 	};
 
 	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
@@ -896,8 +898,7 @@
 			   <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d4>,
 			   <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d4>,
 			   <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d4>,
-			   <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d4>,
-			   <MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc0>;
+			   <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d4>;
 	};
 
 	pinctrl_usdhc2_gpio: usdhc2-gpiogrp {
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts linux-libre-6.12.79-gnu/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
index ae64731266f3..773282002e6c 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
@@ -603,6 +603,10 @@
 	status = "okay";
 };
 
+&reg_usdhc2_vqmmc {
+	status = "okay";
+};
+
 &sai3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_sai3>;
@@ -855,7 +859,7 @@
 		fsl,pins = <MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL	0x400001c2>,
 			   <MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA	0x400001c2>,
 			   <MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD	0x40000010>,
-			   <MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC	0x40000010>;
+			   <MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC	0x40000030>;
 	};
 
 	pinctrl_hoggpio2: hoggpio2grp {
@@ -982,8 +986,7 @@
 			   <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d2>,
 			   <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d2>,
 			   <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d2>,
-			   <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d2>,
-			   <MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc0>;
+			   <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d2>;
 	};
 
 	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
@@ -992,8 +995,7 @@
 			   <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d4>,
 			   <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d4>,
 			   <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d4>,
-			   <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d4>,
-			   <MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc0>;
+			   <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d4>;
 	};
 
 	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
@@ -1002,8 +1004,7 @@
 			   <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d4>,
 			   <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d4>,
 			   <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d4>,
-			   <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d4>,
-			   <MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc0>;
+			   <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d4>;
 	};
 
 	pinctrl_usdhc2_gpio: usdhc2-gpiogrp {
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi
index 336785a9fba8..9eac178ab2c2 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi
@@ -1,7 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
- * Copyright 2021-2022 TQ-Systems GmbH
- * Author: Alexander Stein <alexander.stein@tq-group.com>
+ * Copyright 2021-2025 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
  */
 
 #include "imx8mp.dtsi"
@@ -24,13 +25,18 @@
 		regulator-always-on;
 	};
 
-	/* e-MMC IO, needed for HS modes */
-	reg_vcc1v8: regulator-vcc1v8 {
-		compatible = "regulator-fixed";
-		regulator-name = "VCC1V8";
+	reg_usdhc2_vqmmc: regulator-usdhc2-vqmmc {
+		compatible = "regulator-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vqmmc>;
+		regulator-name = "V_SD2";
 		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-always-on;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x1>,
+			 <3300000 0x0>;
+		vin-supply = <&ldo5_reg>;
+		status = "disabled";
 	};
 };
 
@@ -187,6 +193,10 @@
 	};
 };
 
+&usdhc2 {
+	vqmmc-supply = <&reg_usdhc2_vqmmc>;
+};
+
 &usdhc3 {
 	pinctrl-names = "default", "state_100mhz", "state_200mhz";
 	pinctrl-0 = <&pinctrl_usdhc3>;
@@ -197,7 +207,7 @@
 	no-sd;
 	no-sdio;
 	vmmc-supply = <&reg_vcc3v3>;
-	vqmmc-supply = <&reg_vcc1v8>;
+	vqmmc-supply = <&buck5_reg>;
 	status = "okay";
 };
 
@@ -236,6 +246,10 @@
 		fsl,pins = <MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19	0x10>;
 	};
 
+	pinctrl_reg_usdhc2_vqmmc: regusdhc2vqmmcgrp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO04__GPIO1_IO04		0xc0>;
+	};
+
 	pinctrl_usdhc3: usdhc3grp {
 		fsl,pins = <MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x194>,
 			   <MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d4>,
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/freescale/imx8mp-var-som.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/freescale/imx8mp-var-som.dtsi
index b2ac2583a592..b59da91fdd04 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/freescale/imx8mp-var-som.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/freescale/imx8mp-var-som.dtsi
@@ -35,7 +35,6 @@
 		      <0x1 0x00000000 0 0xc0000000>;
 	};
 
-
 	reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
 	        compatible = "regulator-fixed";
 	        regulator-name = "VSD_3V3";
@@ -46,6 +45,16 @@
 	        startup-delay-us = <100>;
 	        off-on-delay-us = <12000>;
 	};
+
+	reg_usdhc2_vqmmc: regulator-usdhc2-vqmmc {
+		compatible = "regulator-gpio";
+		regulator-name = "VSD_VSEL";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
+		states = <3300000 0x0 1800000 0x1>;
+		vin-supply = <&ldo5>;
+	};
 };
 
 &A53_0 {
@@ -205,6 +214,7 @@
         pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
         cd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
         vmmc-supply = <&reg_usdhc2_vmmc>;
+	vqmmc-supply = <&reg_usdhc2_vqmmc>;
         bus-width = <4>;
         status = "okay";
 };
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/freescale/imx8mp-venice-gw702x.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/freescale/imx8mp-venice-gw702x.dtsi
index 6c75a5ecf56b..4e89aa9ce9ad 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/freescale/imx8mp-venice-gw702x.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/freescale/imx8mp-venice-gw702x.dtsi
@@ -393,13 +393,6 @@
 	status = "okay";
 };
 
-/* off-board header */
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
 /* console */
 &uart2 {
 	pinctrl-names = "default";
@@ -407,25 +400,6 @@
 	status = "okay";
 };
 
-/* off-board header */
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	status = "okay";
-};
-
-/* off-board */
-&usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	bus-width = <4>;
-	non-removable;
-	status = "okay";
-	bus-width = <4>;
-	non-removable;
-	status = "okay";
-};
-
 /* eMMC */
 &usdhc3 {
 	pinctrl-names = "default", "state_100mhz", "state_200mhz";
@@ -519,13 +493,6 @@
 		>;
 	};
 
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX	0x140
-			MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX	0x140
-		>;
-	};
-
 	pinctrl_uart2: uart2grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX	0x140
@@ -533,24 +500,6 @@
 		>;
 	};
 
-	pinctrl_uart3: uart3grp {
-		fsl,pins = <
-			MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX	0x140
-			MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX	0x140
-		>;
-	};
-
-	pinctrl_usdhc1: usdhc1grp {
-		fsl,pins = <
-			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK	0x190
-			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD	0x1d0
-			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0	0x1d0
-			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1	0x1d0
-			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2	0x1d0
-			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3	0x1d0
-		>;
-	};
-
 	pinctrl_usdhc3: usdhc3grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x190
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/freescale/imx8mp-venice-gw71xx.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/freescale/imx8mp-venice-gw71xx.dtsi
index 2f740d74707b..4bf818873fe3 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/freescale/imx8mp-venice-gw71xx.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/freescale/imx8mp-venice-gw71xx.dtsi
@@ -70,7 +70,7 @@
 	tpm@1 {
 		compatible = "atmel,attpm20p", "tcg,tpm_tis-spi";
 		reg = <0x1>;
-		spi-max-frequency = <36000000>;
+		spi-max-frequency = <25000000>;
 	};
 };
 
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/freescale/imx8mp-venice-gw72xx.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/freescale/imx8mp-venice-gw72xx.dtsi
index 5ab3ffe9931d..76020ef89bf3 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/freescale/imx8mp-venice-gw72xx.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/freescale/imx8mp-venice-gw72xx.dtsi
@@ -110,7 +110,7 @@
 	tpm@1 {
 		compatible = "atmel,attpm20p", "tcg,tpm_tis-spi";
 		reg = <0x1>;
-		spi-max-frequency = <36000000>;
+		spi-max-frequency = <25000000>;
 	};
 };
 
@@ -365,17 +365,6 @@
 		>;
 	};
 
-	pinctrl_usdhc1: usdhc1grp {
-		fsl,pins = <
-			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK	0x190
-			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD	0x1d0
-			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0	0x1d0
-			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1	0x1d0
-			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2	0x1d0
-			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3	0x1d0
-		>;
-	};
-
 	pinctrl_usdhc2: usdhc2grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x190
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/freescale/imx8mp-venice-gw73xx.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/freescale/imx8mp-venice-gw73xx.dtsi
index e2b5e7ac3e46..5eb114d2360a 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/freescale/imx8mp-venice-gw73xx.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/freescale/imx8mp-venice-gw73xx.dtsi
@@ -122,7 +122,7 @@
 	tpm@1 {
 		compatible = "atmel,attpm20p", "tcg,tpm_tis-spi";
 		reg = <0x1>;
-		spi-max-frequency = <36000000>;
+		spi-max-frequency = <25000000>;
 	};
 };
 
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts linux-libre-6.12.79-gnu/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts
index d765b7972841..c3647a059d1f 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts
@@ -199,7 +199,7 @@
 	tpm@0 {
 		compatible = "atmel,attpm20p", "tcg,tpm_tis-spi";
 		reg = <0x0>;
-		spi-max-frequency = <36000000>;
+		spi-max-frequency = <25000000>;
 	};
 };
 
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/freescale/imx8mp-verdin-dahlia.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/freescale/imx8mp-verdin-dahlia.dtsi
index da8902c5f7e5..1493319aa748 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/freescale/imx8mp-verdin-dahlia.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/freescale/imx8mp-verdin-dahlia.dtsi
@@ -28,10 +28,10 @@
 			"Headphone Jack", "HPOUTR",
 			"IN2L", "Line In Jack",
 			"IN2R", "Line In Jack",
-			"Headphone Jack", "MICBIAS",
-			"IN1L", "Headphone Jack";
+			"Microphone Jack", "MICBIAS",
+			"IN1L", "Microphone Jack";
 		simple-audio-card,widgets =
-			"Microphone", "Headphone Jack",
+			"Microphone", "Microphone Jack",
 			"Headphone", "Headphone Jack",
 			"Line", "Line In Jack";
 
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
index a19ad5ee7f79..1689fe440993 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
@@ -175,7 +175,7 @@
 		regulator-max-microvolt = <3300000>;
 		regulator-min-microvolt = <3300000>;
 		regulator-name = "+V3.3_SD";
-		startup-delay-us = <2000>;
+		startup-delay-us = <20000>;
 	};
 
 	reserved-memory {
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/freescale/imx8mp.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/freescale/imx8mp.dtsi
index bda579270da7..3ee69953a5a0 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/freescale/imx8mp.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/freescale/imx8mp.dtsi
@@ -283,7 +283,7 @@
 		cpu-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <2000>;
-			thermal-sensors = <&tmu 0>;
+			thermal-sensors = <&tmu 1>;
 			trips {
 				cpu_alert0: trip0 {
 					temperature = <85000>;
@@ -313,7 +313,7 @@
 		soc-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <2000>;
-			thermal-sensors = <&tmu 1>;
+			thermal-sensors = <&tmu 0>;
 			trips {
 				soc_alert0: trip0 {
 					temperature = <85000>;
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/freescale/imx8qm-mek.dts linux-libre-6.12.79-gnu/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
index 62203eed6a6c..19c8d7ce1d40 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
@@ -114,8 +114,8 @@
 		compatible = "nxp,cbdtu02043", "gpio-sbu-mux";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_typec_mux>;
-		select-gpios = <&lsio_gpio4 6 GPIO_ACTIVE_LOW>;
-		enable-gpios = <&lsio_gpio4 19 GPIO_ACTIVE_HIGH>;
+		select-gpios = <&lsio_gpio4 6 GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&lsio_gpio4 19 GPIO_ACTIVE_LOW>;
 		orientation-switch;
 
 		port {
@@ -132,6 +132,7 @@
 		regulator-max-microvolt = <3000000>;
 		gpio = <&lsio_gpio4 7 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
+		off-on-delay-us = <4800>;
 	};
 
 	reg_fec2_supply: regulator-fec2-nvcc {
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi
index aa9f28c4431d..f381e2636c3a 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi
@@ -168,25 +168,25 @@
 
 &lpuart0 {
 	compatible = "fsl,imx8qm-lpuart", "fsl,imx8qxp-lpuart";
-	dmas = <&edma2 13 0 0>, <&edma2 12 0 1>;
+	dmas = <&edma2 12 0 FSL_EDMA_RX>, <&edma2 13 0 0>;
 	dma-names = "rx","tx";
 };
 
 &lpuart1 {
 	compatible = "fsl,imx8qm-lpuart", "fsl,imx8qxp-lpuart";
-	dmas = <&edma2 15 0 0>, <&edma2 14 0 1>;
+	dmas = <&edma2 14 0 FSL_EDMA_RX>, <&edma2 15 0 0>;
 	dma-names = "rx","tx";
 };
 
 &lpuart2 {
 	compatible = "fsl,imx8qm-lpuart", "fsl,imx8qxp-lpuart";
-	dmas = <&edma2 17 0 0>, <&edma2 16 0 1>;
+	dmas = <&edma2 16 0 FSL_EDMA_RX>, <&edma2 17 0 0>;
 	dma-names = "rx","tx";
 };
 
 &lpuart3 {
 	compatible = "fsl,imx8qm-lpuart", "fsl,imx8qxp-lpuart";
-	dmas = <&edma2 19 0 0>, <&edma2 18 0 1>;
+	dmas = <&edma2 18 0 FSL_EDMA_RX>, <&edma2 19 0 0>;
 	dma-names = "rx","tx";
 };
 
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/freescale/imx93-kontron-bl-osm-s.dts linux-libre-6.12.79-gnu/arch/arm64/boot/dts/freescale/imx93-kontron-bl-osm-s.dts
index 89e97c604bd3..c3d2ddd887fd 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/freescale/imx93-kontron-bl-osm-s.dts
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/freescale/imx93-kontron-bl-osm-s.dts
@@ -33,7 +33,9 @@
 
 	reg_vcc_panel: regulator-vcc-panel {
 		compatible = "regulator-fixed";
-		gpio = <&gpio4 3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_vcc_panel>;
+		gpio = <&gpio2 21 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 		regulator-max-microvolt = <3300000>;
 		regulator-min-microvolt = <3300000>;
@@ -135,6 +137,16 @@
 };
 
 &usbotg1 {
+	adp-disable;
+	hnp-disable;
+	srp-disable;
+	disable-over-current;
+	dr_mode = "otg";
+	usb-role-switch;
+	status = "okay";
+};
+
+&usbotg2 {
 	#address-cells = <1>;
 	#size-cells = <0>;
 	disable-over-current;
@@ -147,17 +159,15 @@
 	};
 };
 
-&usbotg2 {
-	adp-disable;
-	hnp-disable;
-	srp-disable;
-	disable-over-current;
-	dr_mode = "otg";
-	usb-role-switch;
-	status = "okay";
-};
-
 &usdhc2 {
 	vmmc-supply = <&reg_vdd_3v3>;
 	status = "okay";
 };
+
+&iomuxc {
+	pinctrl_reg_vcc_panel: regvccpanelgrp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO21__GPIO2_IO21		0x31e /* PWM_2 */
+		>;
+	};
+};
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/freescale/imx93-tqma9352.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/freescale/imx93-tqma9352.dtsi
index 2cabdae24227..09385b058664 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/freescale/imx93-tqma9352.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/freescale/imx93-tqma9352.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
 /*
- * Copyright (c) 2022 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * Copyright (c) 2022-2025 TQ-Systems GmbH <linux@ew.tq-group.com>,
  * D-82229 Seefeld, Germany.
  * Author: Markus Niebel
  */
@@ -110,11 +110,11 @@
 				regulator-ramp-delay = <3125>;
 			};
 
-			/* V_DDRQ - 1.1 LPDDR4 or 0.6 LPDDR4X */
+			/* V_DDRQ - 0.6 V for LPDDR4X */
 			buck2: BUCK2 {
 				regulator-name = "BUCK2";
 				regulator-min-microvolt = <600000>;
-				regulator-max-microvolt = <1100000>;
+				regulator-max-microvolt = <600000>;
 				regulator-boot-on;
 				regulator-always-on;
 				regulator-ramp-delay = <3125>;
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/freescale/imx93.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/freescale/imx93.dtsi
index 04b9b3d31f4f..7bc3852c6ef8 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/freescale/imx93.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/freescale/imx93.dtsi
@@ -917,7 +917,7 @@
 				reg-names = "ram", "regs", "rxfifo", "txfifo";
 				interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_BUS_WAKEUP>,
+				clocks = <&clk IMX93_CLK_SPDIF_IPG>,
 					 <&clk IMX93_CLK_SPDIF_GATE>,
 					 <&clk IMX93_CLK_DUMMY>,
 					 <&clk IMX93_CLK_AUD_XCVR_GATE>;
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/freescale/imx95.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/freescale/imx95.dtsi
index 03661e76550f..ddbc94c375e0 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/freescale/imx95.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/freescale/imx95.dtsi
@@ -822,7 +822,7 @@
 				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&scmi_clk IMX95_CLK_LPUART7>;
 				clock-names = "ipg";
-				dmas = <&edma2 26 0 FSL_EDMA_RX>, <&edma2 25 0 0>;
+				dmas = <&edma2 88 0 FSL_EDMA_RX>, <&edma2 87 0 0>;
 				dma-names = "rx", "tx";
 				status = "disabled";
 			};
@@ -834,7 +834,7 @@
 				interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&scmi_clk IMX95_CLK_LPUART8>;
 				clock-names = "ipg";
-				dmas = <&edma2 28 0 FSL_EDMA_RX>, <&edma2 27 0 0>;
+				dmas = <&edma2 90 0 FSL_EDMA_RX>, <&edma2 89 0 0>;
 				dma-names = "rx", "tx";
 				status = "disabled";
 			};
@@ -1478,7 +1478,7 @@
 			reg = <0 0x4c300000 0 0x10000>,
 			      <0 0x60100000 0 0xfe00000>,
 			      <0 0x4c360000 0 0x10000>,
-			      <0 0x4c340000 0 0x2000>;
+			      <0 0x4c340000 0 0x4000>;
 			reg-names = "dbi", "config", "atu", "app";
 			ranges = <0x81000000 0x0 0x00000000 0x0 0x6ff00000 0 0x00100000>,
 				 <0x82000000 0x0 0x10000000 0x9 0x10000000 0 0x10000000>;
@@ -1518,12 +1518,12 @@
 			reg = <0 0x4c300000 0 0x10000>,
 			      <0 0x4c360000 0 0x1000>,
 			      <0 0x4c320000 0 0x1000>,
-			      <0 0x4c340000 0 0x2000>,
+			      <0 0x4c340000 0 0x4000>,
 			      <0 0x4c370000 0 0x10000>,
 			      <0x9 0 1 0>;
 			reg-names = "dbi","atu", "dbi2", "app", "dma", "addr_space";
 			num-lanes = <1>;
-			interrupts = <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "dma";
 			clocks = <&scmi_clk IMX95_CLK_HSIO>,
 				 <&scmi_clk IMX95_CLK_HSIOPLL>,
@@ -1545,7 +1545,7 @@
 			reg = <0 0x4c380000 0 0x10000>,
 			      <8 0x80100000 0 0xfe00000>,
 			      <0 0x4c3e0000 0 0x10000>,
-			      <0 0x4c3c0000 0 0x2000>;
+			      <0 0x4c3c0000 0 0x4000>;
 			reg-names = "dbi", "config", "atu", "app";
 			ranges = <0x81000000 0 0x00000000 0x8 0x8ff00000 0 0x00100000>,
 				 <0x82000000 0 0x10000000 0xa 0x10000000 0 0x10000000>;
@@ -1585,7 +1585,7 @@
 			reg = <0 0x4c380000 0 0x10000>,
 			      <0 0x4c3e0000 0 0x1000>,
 			      <0 0x4c3a0000 0 0x1000>,
-			      <0 0x4c3c0000 0 0x2000>,
+			      <0 0x4c3c0000 0 0x4000>,
 			      <0 0x4c3f0000 0 0x10000>,
 			      <0xa 0 1 0>;
 			reg-names = "dbi", "atu", "dbi2", "app", "dma", "addr_space";
@@ -1609,7 +1609,7 @@
 
 		netcmix_blk_ctrl: syscon@4c810000 {
 			compatible = "nxp,imx95-netcmix-blk-ctrl", "syscon";
-			reg = <0x0 0x4c810000 0x0 0x10000>;
+			reg = <0x0 0x4c810000 0x0 0x8>;
 			#clock-cells = <1>;
 			clocks = <&scmi_clk IMX95_CLK_BUSNETCMIX>;
 			assigned-clocks = <&scmi_clk IMX95_CLK_BUSNETCMIX>;
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/freescale/mba8mx.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/freescale/mba8mx.dtsi
index c60c7a9e54af..66f927198fe9 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/freescale/mba8mx.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/freescale/mba8mx.dtsi
@@ -186,7 +186,7 @@
 			reset-assert-us = <500000>;
 			reset-deassert-us = <500>;
 			interrupt-parent = <&expander2>;
-			interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+			interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
 		};
 	};
 };
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dtsi
index 3a9b6907185d..242820845707 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dtsi
@@ -26,6 +26,8 @@
 
 	leds {
 		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi_quad_pins>;
 
 		led-power1 {
 			label = "udpu:green:power";
@@ -82,8 +84,6 @@
 
 &spi0 {
 	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi_quad_pins>;
 
 	flash@0 {
 		compatible = "jedec,spi-nor";
@@ -108,6 +108,10 @@
 	};
 };
 
+&spi_quad_pins {
+	function = "gpio";
+};
+
 &pinctrl_nb {
 	i2c2_recovery_pins: i2c2-recovery-pins {
 		groups = "i2c2";
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dts linux-libre-6.12.79-gnu/arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dts
index b1ea7dcaed17..47234d0858dd 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dts
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dts
@@ -435,7 +435,7 @@
 	managed = "in-band-status";
 	phy-mode = "sgmii";
 	phy = <&cp1_phy0>;
-	phys = <&cp0_comphy3 1>;
+	phys = <&cp1_comphy3 1>;
 	status = "okay";
 };
 
@@ -444,7 +444,7 @@
 	managed = "in-band-status";
 	phy-mode = "sgmii";
 	phy = <&cp1_phy1>;
-	phys = <&cp0_comphy5 2>;
+	phys = <&cp1_comphy5 2>;
 	status = "okay";
 };
 
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/marvell/cn9132-clearfog.dts linux-libre-6.12.79-gnu/arch/arm64/boot/dts/marvell/cn9132-clearfog.dts
index 0f53745a6fa0..41166f865f87 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/marvell/cn9132-clearfog.dts
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/marvell/cn9132-clearfog.dts
@@ -413,7 +413,13 @@
 /* SRDS #0,#1,#2,#3 - PCIe */
 &cp0_pcie0 {
 	num-lanes = <4>;
-	phys = <&cp0_comphy0 0>, <&cp0_comphy1 0>, <&cp0_comphy2 0>, <&cp0_comphy3 0>;
+	/*
+	 * The mvebu-comphy driver does not currently know how to pass correct
+	 * lane-count to ATF while configuring the serdes lanes.
+	 * Rely on bootloader configuration only.
+	 *
+	 * phys = <&cp0_comphy0 0>, <&cp0_comphy1 0>, <&cp0_comphy2 0>, <&cp0_comphy3 0>;
+	 */
 	status = "okay";
 };
 
@@ -475,7 +481,13 @@
 /* SRDS #0,#1 - PCIe */
 &cp1_pcie0 {
 	num-lanes = <2>;
-	phys = <&cp1_comphy0 0>, <&cp1_comphy1 0>;
+	/*
+	 * The mvebu-comphy driver does not currently know how to pass correct
+	 * lane-count to ATF while configuring the serdes lanes.
+	 * Rely on bootloader configuration only.
+	 *
+	 * phys = <&cp1_comphy0 0>, <&cp1_comphy1 0>;
+	 */
 	status = "okay";
 };
 
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/marvell/cn9132-sr-cex7.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/marvell/cn9132-sr-cex7.dtsi
index afc041c1c448..bb2bb47fd77c 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/marvell/cn9132-sr-cex7.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/marvell/cn9132-sr-cex7.dtsi
@@ -137,6 +137,14 @@
 	pinctrl-0 = <&ap_mmc0_pins>;
 	pinctrl-names = "default";
 	vqmmc-supply = <&v_1_8>;
+	/*
+	 * Not stable in HS modes - phy needs "more calibration", so disable
+	 * UHS (by preventing voltage switch), SDR104, SDR50 and DDR50 modes.
+	 */
+	no-1-8-v;
+	no-sd;
+	no-sdio;
+	non-removable;
 	status = "okay";
 };
 
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt6331.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/mediatek/mt6331.dtsi
index d89858c73ab1..243afbffa21f 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt6331.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/mediatek/mt6331.dtsi
@@ -6,12 +6,12 @@
 #include <dt-bindings/input/input.h>
 
 &pwrap {
-	pmic: mt6331 {
+	pmic: pmic {
 		compatible = "mediatek,mt6331";
 		interrupt-controller;
 		#interrupt-cells = <2>;
 
-		mt6331regulator: mt6331regulator {
+		mt6331regulator: regulators {
 			compatible = "mediatek,mt6331-regulator";
 
 			mt6331_vdvfs11_reg: buck-vdvfs11 {
@@ -258,7 +258,7 @@
 			};
 
 			mt6331_vdig18_reg: ldo-vdig18 {
-				regulator-name = "dvdd18_dig";
+				regulator-name = "vdig18";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-ramp-delay = <0>;
@@ -266,11 +266,11 @@
 			};
 		};
 
-		mt6331rtc: mt6331rtc {
+		mt6331rtc: rtc {
 			compatible = "mediatek,mt6331-rtc";
 		};
 
-		mt6331keys: mt6331keys {
+		mt6331keys: keys {
 			compatible = "mediatek,mt6331-keys";
 			power {
 				linux,keycodes = <KEY_POWER>;
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt6357.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/mediatek/mt6357.dtsi
index 5fafa842d312..dca4e5c3d8e2 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt6357.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/mediatek/mt6357.dtsi
@@ -60,7 +60,6 @@
 			};
 
 			mt6357_vfe28_reg: ldo-vfe28 {
-				compatible = "regulator-fixed";
 				regulator-name = "vfe28";
 				regulator-min-microvolt = <2800000>;
 				regulator-max-microvolt = <2800000>;
@@ -75,7 +74,6 @@
 			};
 
 			mt6357_vrf18_reg: ldo-vrf18 {
-				compatible = "regulator-fixed";
 				regulator-name = "vrf18";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
@@ -83,7 +81,6 @@
 			};
 
 			mt6357_vrf12_reg: ldo-vrf12 {
-				compatible = "regulator-fixed";
 				regulator-name = "vrf12";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <1200000>;
@@ -112,7 +109,6 @@
 			};
 
 			mt6357_vcn28_reg: ldo-vcn28 {
-				compatible = "regulator-fixed";
 				regulator-name = "vcn28";
 				regulator-min-microvolt = <2800000>;
 				regulator-max-microvolt = <2800000>;
@@ -120,7 +116,6 @@
 			};
 
 			mt6357_vcn18_reg: ldo-vcn18 {
-				compatible = "regulator-fixed";
 				regulator-name = "vcn18";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
@@ -142,7 +137,6 @@
 			};
 
 			mt6357_vcamio_reg: ldo-vcamio18 {
-				compatible = "regulator-fixed";
 				regulator-name = "vcamio";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
@@ -175,7 +169,6 @@
 			};
 
 			mt6357_vaux18_reg: ldo-vaux18 {
-				compatible = "regulator-fixed";
 				regulator-name = "vaux18";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
@@ -183,7 +176,6 @@
 			};
 
 			mt6357_vaud28_reg: ldo-vaud28 {
-				compatible = "regulator-fixed";
 				regulator-name = "vaud28";
 				regulator-min-microvolt = <2800000>;
 				regulator-max-microvolt = <2800000>;
@@ -191,7 +183,6 @@
 			};
 
 			mt6357_vio28_reg: ldo-vio28 {
-				compatible = "regulator-fixed";
 				regulator-name = "vio28";
 				regulator-min-microvolt = <2800000>;
 				regulator-max-microvolt = <2800000>;
@@ -199,7 +190,6 @@
 			};
 
 			mt6357_vio18_reg: ldo-vio18 {
-				compatible = "regulator-fixed";
 				regulator-name = "vio18";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt6358.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/mediatek/mt6358.dtsi
index 641d452fbc08..e23672a2eea4 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt6358.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/mediatek/mt6358.dtsi
@@ -15,12 +15,12 @@
 			#io-channel-cells = <1>;
 		};
 
-		mt6358codec: mt6358codec {
+		mt6358codec: audio-codec {
 			compatible = "mediatek,mt6358-sound";
 			mediatek,dmic-mode = <0>; /* two-wires */
 		};
 
-		mt6358regulator: mt6358regulator {
+		mt6358regulator: regulators {
 			compatible = "mediatek,mt6358-regulator";
 
 			mt6358_vdram1_reg: buck_vdram1 {
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt6359.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/mediatek/mt6359.dtsi
index 8e1b8c85c6ed..779d6dfb55c0 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt6359.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/mediatek/mt6359.dtsi
@@ -18,6 +18,8 @@
 		};
 
 		regulators {
+			compatible = "mediatek,mt6359-regulator";
+
 			mt6359_vs1_buck_reg: buck_vs1 {
 				regulator-name = "vs1";
 				regulator-min-microvolt = <800000>;
@@ -296,7 +298,7 @@
 			};
 		};
 
-		mt6359rtc: mt6359rtc {
+		mt6359rtc: rtc {
 			compatible = "mediatek,mt6358-rtc";
 		};
 	};
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt6795-sony-xperia-m5.dts linux-libre-6.12.79-gnu/arch/arm64/boot/dts/mediatek/mt6795-sony-xperia-m5.dts
index 91de920c2245..03cc48321a3f 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt6795-sony-xperia-m5.dts
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/mediatek/mt6795-sony-xperia-m5.dts
@@ -212,7 +212,7 @@
 
 &mmc0 {
 	/* eMMC controller */
-	mediatek,latch-ck = <0x14>; /* hs400 */
+	mediatek,latch-ck = <4>; /* hs400 */
 	mediatek,hs200-cmd-int-delay = <1>;
 	mediatek,hs400-cmd-int-delay = <1>;
 	mediatek,hs400-ds-dly3 = <0x1a>;
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt7988a.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/mediatek/mt7988a.dtsi
index aa728331e876..284e240b7997 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt7988a.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/mediatek/mt7988a.dtsi
@@ -129,6 +129,7 @@
 			reg = <0 0x11003000 0 0x1000>,
 			      <0 0x10217080 0 0x80>;
 			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+			clock-div = <1>;
 			clocks = <&infracfg CLK_INFRA_I2C_BCK>,
 				 <&infracfg CLK_INFRA_66M_AP_DMA_BCK>;
 			clock-names = "main", "dma";
@@ -142,6 +143,7 @@
 			reg = <0 0x11004000 0 0x1000>,
 			      <0 0x10217100 0 0x80>;
 			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+			clock-div = <1>;
 			clocks = <&infracfg CLK_INFRA_I2C_BCK>,
 				 <&infracfg CLK_INFRA_66M_AP_DMA_BCK>;
 			clock-names = "main", "dma";
@@ -155,6 +157,7 @@
 			reg = <0 0x11005000 0 0x1000>,
 			      <0 0x10217180 0 0x80>;
 			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			clock-div = <1>;
 			clocks = <&infracfg CLK_INFRA_I2C_BCK>,
 				 <&infracfg CLK_INFRA_66M_AP_DMA_BCK>;
 			clock-names = "main", "dma";
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi
index 8d1cbc92bce3..ae0379fd42a9 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi
@@ -49,6 +49,14 @@
 		interrupts-extended = <&pio 117 IRQ_TYPE_LEVEL_LOW>;
 		reg = <0x2c>;
 		hid-descr-addr = <0x0020>;
+		/*
+		 * The trackpad needs a post-power-on delay of 100ms,
+		 * but at time of writing, the power supply for it on
+		 * this board is always on. The delay is therefore not
+		 * added to avoid impacting the readiness of the
+		 * trackpad.
+		 */
+		vdd-supply = <&mt6397_vgp6_reg>;
 		wakeup-source;
 	};
 };
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
index b4d85147b77b..309e2d104fdc 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
@@ -931,7 +931,7 @@
 		interrupt-controller;
 		#interrupt-cells = <2>;
 
-		clock: mt6397clock {
+		clock: clocks {
 			compatible = "mediatek,mt6397-clk";
 			#clock-cells = <1>;
 		};
@@ -942,11 +942,10 @@
 			#gpio-cells = <2>;
 		};
 
-		regulator: mt6397regulator {
+		regulators {
 			compatible = "mediatek,mt6397-regulator";
 
 			mt6397_vpca15_reg: buck_vpca15 {
-				regulator-compatible = "buck_vpca15";
 				regulator-name = "vpca15";
 				regulator-min-microvolt = < 700000>;
 				regulator-max-microvolt = <1350000>;
@@ -956,7 +955,6 @@
 			};
 
 			mt6397_vpca7_reg: buck_vpca7 {
-				regulator-compatible = "buck_vpca7";
 				regulator-name = "vpca7";
 				regulator-min-microvolt = < 700000>;
 				regulator-max-microvolt = <1350000>;
@@ -966,7 +964,6 @@
 			};
 
 			mt6397_vsramca15_reg: buck_vsramca15 {
-				regulator-compatible = "buck_vsramca15";
 				regulator-name = "vsramca15";
 				regulator-min-microvolt = < 700000>;
 				regulator-max-microvolt = <1350000>;
@@ -975,7 +972,6 @@
 			};
 
 			mt6397_vsramca7_reg: buck_vsramca7 {
-				regulator-compatible = "buck_vsramca7";
 				regulator-name = "vsramca7";
 				regulator-min-microvolt = < 700000>;
 				regulator-max-microvolt = <1350000>;
@@ -984,7 +980,6 @@
 			};
 
 			mt6397_vcore_reg: buck_vcore {
-				regulator-compatible = "buck_vcore";
 				regulator-name = "vcore";
 				regulator-min-microvolt = < 700000>;
 				regulator-max-microvolt = <1350000>;
@@ -993,7 +988,6 @@
 			};
 
 			mt6397_vgpu_reg: buck_vgpu {
-				regulator-compatible = "buck_vgpu";
 				regulator-name = "vgpu";
 				regulator-min-microvolt = < 700000>;
 				regulator-max-microvolt = <1350000>;
@@ -1002,7 +996,6 @@
 			};
 
 			mt6397_vdrm_reg: buck_vdrm {
-				regulator-compatible = "buck_vdrm";
 				regulator-name = "vdrm";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <1400000>;
@@ -1011,7 +1004,6 @@
 			};
 
 			mt6397_vio18_reg: buck_vio18 {
-				regulator-compatible = "buck_vio18";
 				regulator-name = "vio18";
 				regulator-min-microvolt = <1620000>;
 				regulator-max-microvolt = <1980000>;
@@ -1020,18 +1012,15 @@
 			};
 
 			mt6397_vtcxo_reg: ldo_vtcxo {
-				regulator-compatible = "ldo_vtcxo";
 				regulator-name = "vtcxo";
 				regulator-always-on;
 			};
 
 			mt6397_va28_reg: ldo_va28 {
-				regulator-compatible = "ldo_va28";
 				regulator-name = "va28";
 			};
 
 			mt6397_vcama_reg: ldo_vcama {
-				regulator-compatible = "ldo_vcama";
 				regulator-name = "vcama";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
@@ -1039,18 +1028,15 @@
 			};
 
 			mt6397_vio28_reg: ldo_vio28 {
-				regulator-compatible = "ldo_vio28";
 				regulator-name = "vio28";
 				regulator-always-on;
 			};
 
 			mt6397_vusb_reg: ldo_vusb {
-				regulator-compatible = "ldo_vusb";
 				regulator-name = "vusb";
 			};
 
 			mt6397_vmc_reg: ldo_vmc {
-				regulator-compatible = "ldo_vmc";
 				regulator-name = "vmc";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <3300000>;
@@ -1058,7 +1044,6 @@
 			};
 
 			mt6397_vmch_reg: ldo_vmch {
-				regulator-compatible = "ldo_vmch";
 				regulator-name = "vmch";
 				regulator-min-microvolt = <3000000>;
 				regulator-max-microvolt = <3300000>;
@@ -1066,7 +1051,6 @@
 			};
 
 			mt6397_vemc_3v3_reg: ldo_vemc3v3 {
-				regulator-compatible = "ldo_vemc3v3";
 				regulator-name = "vemc_3v3";
 				regulator-min-microvolt = <3000000>;
 				regulator-max-microvolt = <3300000>;
@@ -1074,7 +1058,6 @@
 			};
 
 			mt6397_vgp1_reg: ldo_vgp1 {
-				regulator-compatible = "ldo_vgp1";
 				regulator-name = "vcamd";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
@@ -1082,7 +1065,6 @@
 			};
 
 			mt6397_vgp2_reg: ldo_vgp2 {
-				regulator-compatible = "ldo_vgp2";
 				regulator-name = "vcamio";
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3300000>;
@@ -1090,7 +1072,6 @@
 			};
 
 			mt6397_vgp3_reg: ldo_vgp3 {
-				regulator-compatible = "ldo_vgp3";
 				regulator-name = "vcamaf";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
@@ -1098,7 +1079,6 @@
 			};
 
 			mt6397_vgp4_reg: ldo_vgp4 {
-				regulator-compatible = "ldo_vgp4";
 				regulator-name = "vgp4";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <3300000>;
@@ -1106,7 +1086,6 @@
 			};
 
 			mt6397_vgp5_reg: ldo_vgp5 {
-				regulator-compatible = "ldo_vgp5";
 				regulator-name = "vgp5";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <3000000>;
@@ -1114,7 +1093,6 @@
 			};
 
 			mt6397_vgp6_reg: ldo_vgp6 {
-				regulator-compatible = "ldo_vgp6";
 				regulator-name = "vgp6";
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3300000>;
@@ -1123,7 +1101,6 @@
 			};
 
 			mt6397_vibr_reg: ldo_vibr {
-				regulator-compatible = "ldo_vibr";
 				regulator-name = "vibr";
 				regulator-min-microvolt = <1300000>;
 				regulator-max-microvolt = <3300000>;
@@ -1131,7 +1108,7 @@
 			};
 		};
 
-		rtc: mt6397rtc {
+		rtc: rtc {
 			compatible = "mediatek,mt6397-rtc";
 		};
 	};
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8173-evb.dts linux-libre-6.12.79-gnu/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
index bb4671c18e3b..9fffed0ef4bf 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
@@ -307,11 +307,10 @@
 		interrupt-controller;
 		#interrupt-cells = <2>;
 
-		mt6397regulator: mt6397regulator {
+		regulators {
 			compatible = "mediatek,mt6397-regulator";
 
 			mt6397_vpca15_reg: buck_vpca15 {
-				regulator-compatible = "buck_vpca15";
 				regulator-name = "vpca15";
 				regulator-min-microvolt = < 700000>;
 				regulator-max-microvolt = <1350000>;
@@ -320,7 +319,6 @@
 			};
 
 			mt6397_vpca7_reg: buck_vpca7 {
-				regulator-compatible = "buck_vpca7";
 				regulator-name = "vpca7";
 				regulator-min-microvolt = < 700000>;
 				regulator-max-microvolt = <1350000>;
@@ -329,7 +327,6 @@
 			};
 
 			mt6397_vsramca15_reg: buck_vsramca15 {
-				regulator-compatible = "buck_vsramca15";
 				regulator-name = "vsramca15";
 				regulator-min-microvolt = < 700000>;
 				regulator-max-microvolt = <1350000>;
@@ -338,7 +335,6 @@
 			};
 
 			mt6397_vsramca7_reg: buck_vsramca7 {
-				regulator-compatible = "buck_vsramca7";
 				regulator-name = "vsramca7";
 				regulator-min-microvolt = < 700000>;
 				regulator-max-microvolt = <1350000>;
@@ -347,7 +343,6 @@
 			};
 
 			mt6397_vcore_reg: buck_vcore {
-				regulator-compatible = "buck_vcore";
 				regulator-name = "vcore";
 				regulator-min-microvolt = < 700000>;
 				regulator-max-microvolt = <1350000>;
@@ -356,7 +351,6 @@
 			};
 
 			mt6397_vgpu_reg: buck_vgpu {
-				regulator-compatible = "buck_vgpu";
 				regulator-name = "vgpu";
 				regulator-min-microvolt = < 700000>;
 				regulator-max-microvolt = <1350000>;
@@ -365,7 +359,6 @@
 			};
 
 			mt6397_vdrm_reg: buck_vdrm {
-				regulator-compatible = "buck_vdrm";
 				regulator-name = "vdrm";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <1400000>;
@@ -374,7 +367,6 @@
 			};
 
 			mt6397_vio18_reg: buck_vio18 {
-				regulator-compatible = "buck_vio18";
 				regulator-name = "vio18";
 				regulator-min-microvolt = <1620000>;
 				regulator-max-microvolt = <1980000>;
@@ -383,19 +375,16 @@
 			};
 
 			mt6397_vtcxo_reg: ldo_vtcxo {
-				regulator-compatible = "ldo_vtcxo";
 				regulator-name = "vtcxo";
 				regulator-always-on;
 			};
 
 			mt6397_va28_reg: ldo_va28 {
-				regulator-compatible = "ldo_va28";
 				regulator-name = "va28";
 				regulator-always-on;
 			};
 
 			mt6397_vcama_reg: ldo_vcama {
-				regulator-compatible = "ldo_vcama";
 				regulator-name = "vcama";
 				regulator-min-microvolt = <1500000>;
 				regulator-max-microvolt = <2800000>;
@@ -403,18 +392,15 @@
 			};
 
 			mt6397_vio28_reg: ldo_vio28 {
-				regulator-compatible = "ldo_vio28";
 				regulator-name = "vio28";
 				regulator-always-on;
 			};
 
 			mt6397_vusb_reg: ldo_vusb {
-				regulator-compatible = "ldo_vusb";
 				regulator-name = "vusb";
 			};
 
 			mt6397_vmc_reg: ldo_vmc {
-				regulator-compatible = "ldo_vmc";
 				regulator-name = "vmc";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <3300000>;
@@ -422,7 +408,6 @@
 			};
 
 			mt6397_vmch_reg: ldo_vmch {
-				regulator-compatible = "ldo_vmch";
 				regulator-name = "vmch";
 				regulator-min-microvolt = <3000000>;
 				regulator-max-microvolt = <3300000>;
@@ -430,7 +415,6 @@
 			};
 
 			mt6397_vemc_3v3_reg: ldo_vemc3v3 {
-				regulator-compatible = "ldo_vemc3v3";
 				regulator-name = "vemc_3v3";
 				regulator-min-microvolt = <3000000>;
 				regulator-max-microvolt = <3300000>;
@@ -438,7 +422,6 @@
 			};
 
 			mt6397_vgp1_reg: ldo_vgp1 {
-				regulator-compatible = "ldo_vgp1";
 				regulator-name = "vcamd";
 				regulator-min-microvolt = <1220000>;
 				regulator-max-microvolt = <3300000>;
@@ -446,7 +429,6 @@
 			};
 
 			mt6397_vgp2_reg: ldo_vgp2 {
-				regulator-compatible = "ldo_vgp2";
 				regulator-name = "vcamio";
 				regulator-min-microvolt = <1000000>;
 				regulator-max-microvolt = <3300000>;
@@ -454,7 +436,6 @@
 			};
 
 			mt6397_vgp3_reg: ldo_vgp3 {
-				regulator-compatible = "ldo_vgp3";
 				regulator-name = "vcamaf";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <3300000>;
@@ -462,7 +443,6 @@
 			};
 
 			mt6397_vgp4_reg: ldo_vgp4 {
-				regulator-compatible = "ldo_vgp4";
 				regulator-name = "vgp4";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <3300000>;
@@ -470,7 +450,6 @@
 			};
 
 			mt6397_vgp5_reg: ldo_vgp5 {
-				regulator-compatible = "ldo_vgp5";
 				regulator-name = "vgp5";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <3000000>;
@@ -478,7 +457,6 @@
 			};
 
 			mt6397_vgp6_reg: ldo_vgp6 {
-				regulator-compatible = "ldo_vgp6";
 				regulator-name = "vgp6";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <3300000>;
@@ -486,7 +464,6 @@
 			};
 
 			mt6397_vibr_reg: ldo_vibr {
-				regulator-compatible = "ldo_vibr";
 				regulator-name = "vibr";
 				regulator-min-microvolt = <1300000>;
 				regulator-max-microvolt = <3300000>;
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8173.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index 3458be7f7f61..f49ec7495906 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -1255,8 +1255,7 @@
 		};
 
 		pwm0: pwm@1401e000 {
-			compatible = "mediatek,mt8173-disp-pwm",
-				     "mediatek,mt6595-disp-pwm";
+			compatible = "mediatek,mt8173-disp-pwm";
 			reg = <0 0x1401e000 0 0x1000>;
 			#pwm-cells = <2>;
 			clocks = <&mmsys CLK_MM_DISP_PWM026M>,
@@ -1266,8 +1265,7 @@
 		};
 
 		pwm1: pwm@1401f000 {
-			compatible = "mediatek,mt8173-disp-pwm",
-				     "mediatek,mt6595-disp-pwm";
+			compatible = "mediatek,mt8173-disp-pwm";
 			reg = <0 0x1401f000 0 0x1000>;
 			#pwm-cells = <2>;
 			clocks = <&mmsys CLK_MM_DISP_PWM126M>,
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-burnet.dts linux-libre-6.12.79-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-burnet.dts
index 19c1e2bee494..20b71f2e7159 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-burnet.dts
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-burnet.dts
@@ -30,3 +30,6 @@
 	};
 };
 
+&i2c2 {
+	i2c-scl-internal-delay-ns = <4100>;
+};
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-cozmo.dts linux-libre-6.12.79-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-cozmo.dts
index f34964afe39b..83bbcfe62083 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-cozmo.dts
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-cozmo.dts
@@ -18,6 +18,8 @@
 };
 
 &i2c2 {
+	i2c-scl-internal-delay-ns = <25000>;
+
 	trackpad@2c {
 		compatible = "hid-over-i2c";
 		reg = <0x2c>;
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-damu.dts linux-libre-6.12.79-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-damu.dts
index 0b45aee2e299..3935d83a047e 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-damu.dts
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-damu.dts
@@ -26,7 +26,14 @@
 	hid-descr-addr = <0x0001>;
 };
 
+&mt6358codec {
+	mediatek,dmic-mode = <1>; /* one-wire */
+};
+
 &qca_wifi {
 	qcom,ath10k-calibration-variant = "GO_DAMU";
 };
 
+&i2c2 {
+	i2c-scl-internal-delay-ns = <20000>;
+};
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel.dtsi
index bbe6c338f465..f9c1ec366b26 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel.dtsi
@@ -25,3 +25,6 @@
 	};
 };
 
+&i2c2 {
+	i2c-scl-internal-delay-ns = <21500>;
+};
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-kenzo.dts linux-libre-6.12.79-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-kenzo.dts
index e8241587949b..561770fcf69e 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-kenzo.dts
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-kenzo.dts
@@ -12,3 +12,18 @@
 	chassis-type = "laptop";
 	compatible = "google,juniper-sku17", "google,juniper", "mediatek,mt8183";
 };
+
+&i2c0 {
+	touchscreen@40 {
+		compatible = "hid-over-i2c";
+		reg = <0x40>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchscreen_pins>;
+
+		interrupts-extended = <&pio 155 IRQ_TYPE_LEVEL_LOW>;
+
+		post-power-on-delay-ms = <70>;
+		hid-descr-addr = <0x0001>;
+	};
+};
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-pico6.dts linux-libre-6.12.79-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-pico6.dts
index cce326aec1aa..40af5656d6f1 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-pico6.dts
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-pico6.dts
@@ -91,7 +91,7 @@
 
 &pio {
 	bt_pins_wakeup: bt-pins-wakeup {
-		piins-bt-wakeup {
+		pins-bt-wakeup {
 			pinmux = <PINMUX_GPIO42__FUNC_GPIO42>;
 			input-enable;
 		};
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow.dtsi
index 76d33540166f..c942e461a177 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow.dtsi
@@ -6,6 +6,21 @@
 /dts-v1/;
 #include "mt8183-kukui-jacuzzi.dtsi"
 
+&i2c0 {
+	touchscreen@40 {
+		compatible = "hid-over-i2c";
+		reg = <0x40>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchscreen_pins>;
+
+		interrupts-extended = <&pio 155 IRQ_TYPE_LEVEL_LOW>;
+
+		post-power-on-delay-ms = <70>;
+		hid-descr-addr = <0x0001>;
+	};
+};
+
 &i2c2 {
 	trackpad@2c {
 		compatible = "hid-over-i2c";
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
index 783c333107bc..80888bd4ad82 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
@@ -8,35 +8,37 @@
 #include <arm/cros-ec-keyboard.dtsi>
 
 / {
-	pp1200_mipibrdg: pp1200-mipibrdg {
+	pp1000_mipibrdg: pp1000-mipibrdg {
 		compatible = "regulator-fixed";
-		regulator-name = "pp1200_mipibrdg";
+		regulator-name = "pp1000_mipibrdg";
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1000000>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&pp1200_mipibrdg_en>;
+		pinctrl-0 = <&pp1000_mipibrdg_en>;
 
 		enable-active-high;
 		regulator-boot-on;
 
 		gpio = <&pio 54 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&pp1800_alw>;
 	};
 
 	pp1800_mipibrdg: pp1800-mipibrdg {
 		compatible = "regulator-fixed";
 		regulator-name = "pp1800_mipibrdg";
 		pinctrl-names = "default";
-		pinctrl-0 = <&pp1800_lcd_en>;
+		pinctrl-0 = <&pp1800_mipibrdg_en>;
 
 		enable-active-high;
 		regulator-boot-on;
 
 		gpio = <&pio 36 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&pp1800_alw>;
 	};
 
 	pp3300_panel: pp3300-panel {
 		compatible = "regulator-fixed";
 		regulator-name = "pp3300_panel";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pp3300_panel_pins>;
 
@@ -44,18 +46,20 @@
 		regulator-boot-on;
 
 		gpio = <&pio 35 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&pp3300_alw>;
 	};
 
-	vddio_mipibrdg: vddio-mipibrdg {
+	pp3300_mipibrdg: pp3300-mipibrdg {
 		compatible = "regulator-fixed";
-		regulator-name = "vddio_mipibrdg";
+		regulator-name = "pp3300_mipibrdg";
 		pinctrl-names = "default";
-		pinctrl-0 = <&vddio_mipibrdg_en>;
+		pinctrl-0 = <&pp3300_mipibrdg_en>;
 
 		enable-active-high;
 		regulator-boot-on;
 
 		gpio = <&pio 37 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&pp3300_alw>;
 	};
 
 	volume_buttons: volume-buttons {
@@ -146,9 +150,9 @@
 		pinctrl-0 = <&anx7625_pins>;
 		enable-gpios = <&pio 45 GPIO_ACTIVE_HIGH>;
 		reset-gpios = <&pio 73 GPIO_ACTIVE_HIGH>;
-		vdd10-supply = <&pp1200_mipibrdg>;
+		vdd10-supply = <&pp1000_mipibrdg>;
 		vdd18-supply = <&pp1800_mipibrdg>;
-		vdd33-supply = <&vddio_mipibrdg>;
+		vdd33-supply = <&pp3300_mipibrdg>;
 
 		ports {
 			#address-cells = <1>;
@@ -391,14 +395,14 @@
 		"",
 		"";
 
-	pp1200_mipibrdg_en: pp1200-mipibrdg-en {
+	pp1000_mipibrdg_en: pp1000-mipibrdg-en {
 		pins1 {
 			pinmux = <PINMUX_GPIO54__FUNC_GPIO54>;
 			output-low;
 		};
 	};
 
-	pp1800_lcd_en: pp1800-lcd-en {
+	pp1800_mipibrdg_en: pp1800-mipibrdg-en {
 		pins1 {
 			pinmux = <PINMUX_GPIO36__FUNC_GPIO36>;
 			output-low;
@@ -460,7 +464,7 @@
 		};
 	};
 
-	vddio_mipibrdg_en: vddio-mipibrdg-en {
+	pp3300_mipibrdg_en: pp3300-mipibrdg-en {
 		pins1 {
 			pinmux = <PINMUX_GPIO37__FUNC_GPIO37>;
 			output-low;
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi
index a2fb060502d9..8793eeeeb4c6 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi
@@ -92,9 +92,9 @@
 	clock-frequency = <400000>;
 	vbus-supply = <&mt6358_vcn18_reg>;
 
-	eeprom@54 {
+	eeprom@50 {
 		compatible = "atmel,24c32";
-		reg = <0x54>;
+		reg = <0x50>;
 		pagesize = <32>;
 		vcc-supply = <&mt6358_vcn18_reg>;
 	};
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi
index 5c1bf6a1e475..da6e767b4cee 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi
@@ -79,9 +79,9 @@
 	clock-frequency = <400000>;
 	vbus-supply = <&mt6358_vcn18_reg>;
 
-	eeprom@54 {
+	eeprom@50 {
 		compatible = "atmel,24c64";
-		reg = <0x54>;
+		reg = <0x50>;
 		pagesize = <32>;
 		vcc-supply = <&mt6358_vcn18_reg>;
 	};
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi
index 2af7b5010feb..1f5b369eaf26 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi
@@ -88,9 +88,9 @@
 	clock-frequency = <400000>;
 	vbus-supply = <&mt6358_vcn18_reg>;
 
-	eeprom@54 {
+	eeprom@50 {
 		compatible = "atmel,24c32";
-		reg = <0x54>;
+		reg = <0x50>;
 		pagesize = <32>;
 		vcc-supply = <&mt6358_vcn18_reg>;
 	};
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
index 5b10bf2d7399..f07d16baf069 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
@@ -280,14 +280,10 @@
 			};
 		};
 	};
+};
 
-	ports {
-		port {
-			dsi_out: endpoint {
-				remote-endpoint = <&panel_in>;
-			};
-		};
-	};
+&dsi_out {
+	remote-endpoint = <&panel_in>;
 };
 
 &gic {
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts linux-libre-6.12.79-gnu/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts
index 1aa668c3ccf9..dbdee604edab 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts
@@ -63,6 +63,18 @@
 		pulldown-ohm = <0>;
 		io-channels = <&auxadc 0>;
 	};
+
+	connector {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+		type = "d";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_connector_out>;
+			};
+		};
+	};
 };
 
 &auxadc {
@@ -120,6 +132,43 @@
 	pinctrl-0 = <&i2c6_pins>;
 	status = "okay";
 	clock-frequency = <100000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	it66121hdmitx: hdmitx@4c {
+		compatible = "ite,it66121";
+		reg = <0x4c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ite_pins>;
+		reset-gpios = <&pio 160 GPIO_ACTIVE_LOW>;
+		interrupt-parent = <&pio>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+		vcn33-supply = <&mt6358_vcn33_reg>;
+		vcn18-supply = <&mt6358_vcn18_reg>;
+		vrf12-supply = <&mt6358_vrf12_reg>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				it66121_in: endpoint {
+					bus-width = <12>;
+					remote-endpoint = <&dpi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				hdmi_connector_out: endpoint {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
 };
 
 &keyboard {
@@ -362,6 +411,67 @@
 			input-enable;
 		};
 	};
+
+	ite_pins: ite-pins {
+		pins-irq {
+			pinmux = <PINMUX_GPIO4__FUNC_GPIO4>;
+			input-enable;
+			bias-pull-up;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO160__FUNC_GPIO160>;
+			output-high;
+		};
+	};
+
+	dpi_func_pins: dpi-func-pins {
+		pins-dpi {
+			pinmux = <PINMUX_GPIO12__FUNC_I2S5_BCK>,
+				 <PINMUX_GPIO46__FUNC_I2S5_LRCK>,
+				 <PINMUX_GPIO47__FUNC_I2S5_DO>,
+				 <PINMUX_GPIO13__FUNC_DBPI_D0>,
+				 <PINMUX_GPIO14__FUNC_DBPI_D1>,
+				 <PINMUX_GPIO15__FUNC_DBPI_D2>,
+				 <PINMUX_GPIO16__FUNC_DBPI_D3>,
+				 <PINMUX_GPIO17__FUNC_DBPI_D4>,
+				 <PINMUX_GPIO18__FUNC_DBPI_D5>,
+				 <PINMUX_GPIO19__FUNC_DBPI_D6>,
+				 <PINMUX_GPIO20__FUNC_DBPI_D7>,
+				 <PINMUX_GPIO21__FUNC_DBPI_D8>,
+				 <PINMUX_GPIO22__FUNC_DBPI_D9>,
+				 <PINMUX_GPIO23__FUNC_DBPI_D10>,
+				 <PINMUX_GPIO24__FUNC_DBPI_D11>,
+				 <PINMUX_GPIO25__FUNC_DBPI_HSYNC>,
+				 <PINMUX_GPIO26__FUNC_DBPI_VSYNC>,
+				 <PINMUX_GPIO27__FUNC_DBPI_DE>,
+				 <PINMUX_GPIO28__FUNC_DBPI_CK>;
+		};
+	};
+
+	dpi_idle_pins: dpi-idle-pins {
+		pins-idle {
+			pinmux = <PINMUX_GPIO12__FUNC_GPIO12>,
+				 <PINMUX_GPIO46__FUNC_GPIO46>,
+				 <PINMUX_GPIO47__FUNC_GPIO47>,
+				 <PINMUX_GPIO13__FUNC_GPIO13>,
+				 <PINMUX_GPIO14__FUNC_GPIO14>,
+				 <PINMUX_GPIO15__FUNC_GPIO15>,
+				 <PINMUX_GPIO16__FUNC_GPIO16>,
+				 <PINMUX_GPIO17__FUNC_GPIO17>,
+				 <PINMUX_GPIO18__FUNC_GPIO18>,
+				 <PINMUX_GPIO19__FUNC_GPIO19>,
+				 <PINMUX_GPIO20__FUNC_GPIO20>,
+				 <PINMUX_GPIO21__FUNC_GPIO21>,
+				 <PINMUX_GPIO22__FUNC_GPIO22>,
+				 <PINMUX_GPIO23__FUNC_GPIO23>,
+				 <PINMUX_GPIO24__FUNC_GPIO24>,
+				 <PINMUX_GPIO25__FUNC_GPIO25>,
+				 <PINMUX_GPIO26__FUNC_GPIO26>,
+				 <PINMUX_GPIO27__FUNC_GPIO27>,
+				 <PINMUX_GPIO28__FUNC_GPIO28>;
+		};
+	};
 };
 
 &pmic {
@@ -412,6 +522,15 @@
 	status = "okay";
 };
 
-&dsi0 {
-	status = "disabled";
+&dpi0 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&dpi_func_pins>;
+	pinctrl-1 = <&dpi_idle_pins>;
+	status = "okay";
+
+	port {
+		dpi_out: endpoint {
+			remote-endpoint = <&it66121_in>;
+		};
+	};
 };
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8183.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index 266441e999f2..65be2c2c26d4 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -1024,7 +1024,8 @@
 		};
 
 		keyboard: keyboard@10010000 {
-			compatible = "mediatek,mt6779-keypad";
+			compatible = "mediatek,mt8183-keypad",
+				     "mediatek,mt6779-keypad";
 			reg = <0 0x10010000 0 0x1000>;
 			interrupts = <GIC_SPI 186 IRQ_TYPE_EDGE_FALLING>;
 			clocks = <&clk26m>;
@@ -1834,6 +1835,11 @@
 			resets = <&mmsys MT8183_MMSYS_SW0_RST_B_DISP_DSI0>;
 			phys = <&mipi_tx0>;
 			phy-names = "dphy";
+			status = "disabled";
+
+			port {
+				dsi_out: endpoint { };
+			};
 		};
 
 		dpi0: dpi@14015000 {
@@ -1845,6 +1851,11 @@
 				 <&mmsys CLK_MM_DPI_MM>,
 				 <&apmixedsys CLK_APMIXED_TVDPLL>;
 			clock-names = "pixel", "engine", "pll";
+			status = "disabled";
+
+			port {
+				dpi_out: endpoint { };
+			};
 		};
 
 		mutex: mutex@14016000 {
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8186-corsola-krabby.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/mediatek/mt8186-corsola-krabby.dtsi
index 7c971198fa95..72a2a2bff0a9 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8186-corsola-krabby.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/mediatek/mt8186-corsola-krabby.dtsi
@@ -71,14 +71,14 @@
 	i2c-scl-internal-delay-ns = <10000>;
 
 	touchscreen: touchscreen@10 {
-		compatible = "hid-over-i2c";
+		compatible = "elan,ekth6915";
 		reg = <0x10>;
 		interrupts-extended = <&pio 12 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&touchscreen_pins>;
-		post-power-on-delay-ms = <10>;
-		hid-descr-addr = <0x0001>;
-		vdd-supply = <&pp3300_s3>;
+		reset-gpios = <&pio 60 GPIO_ACTIVE_LOW>;
+		vcc33-supply = <&pp3300_s3>;
+		no-reset-on-power-off;
 	};
 };
 
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262144.dts linux-libre-6.12.79-gnu/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262144.dts
index 26d3451a5e47..24d9ede63eaa 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262144.dts
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262144.dts
@@ -42,3 +42,7 @@
 		CROS_STD_MAIN_KEYMAP
 	>;
 };
+
+&touchscreen {
+	compatible = "elan,ekth6a12nay";
+};
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8186-corsola-voltorb.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/mediatek/mt8186-corsola-voltorb.dtsi
index 52ec58128d56..b495a241b443 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8186-corsola-voltorb.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/mediatek/mt8186-corsola-voltorb.dtsi
@@ -10,12 +10,6 @@
 
 / {
 	chassis-type = "laptop";
-
-	max98360a: max98360a {
-		compatible = "maxim,max98360a";
-		sdmode-gpios = <&pio 150 GPIO_ACTIVE_HIGH>;
-		#sound-dai-cells = <0>;
-	};
 };
 
 &cpu6 {
@@ -59,19 +53,14 @@
 	opp-hz = /bits/ 64 <2200000000>;
 };
 
-&rt1019p{
-	status = "disabled";
-};
-
 &sound {
 	compatible = "mediatek,mt8186-mt6366-rt5682s-max98360-sound";
-	status = "okay";
+};
 
-	spk-hdmi-playback-dai-link {
-		codec {
-			sound-dai = <&it6505dptx>, <&max98360a>;
-		};
-	};
+&speaker_codec {
+	compatible = "maxim,max98360a";
+	sdmode-gpios = <&pio 150 GPIO_ACTIVE_HIGH>;
+	/delete-property/ sdb-gpios;
 };
 
 &spmi {
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi
index 925c9038572f..766550514612 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi
@@ -259,15 +259,15 @@
 			mediatek,clk-provider = "cpu";
 			/* RT1019P and IT6505 connected to the same I2S line */
 			codec {
-				sound-dai = <&it6505dptx>, <&rt1019p>;
+				sound-dai = <&it6505dptx>, <&speaker_codec>;
 			};
 		};
 	};
 
-	rt1019p: speaker-codec {
+	speaker_codec: speaker-codec {
 		compatible = "realtek,rt1019p";
 		pinctrl-names = "default";
-		pinctrl-0 = <&rt1019p_pins_default>;
+		pinctrl-0 = <&speaker_codec_pins_default>;
 		#sound-dai-cells = <0>;
 		sdb-gpios = <&pio 150 GPIO_ACTIVE_HIGH>;
 	};
@@ -423,7 +423,7 @@
 		#sound-dai-cells = <0>;
 		ovdd-supply = <&mt6366_vsim2_reg>;
 		pwr18-supply = <&pp1800_dpbrdg_dx>;
-		reset-gpios = <&pio 177 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&pio 177 GPIO_ACTIVE_LOW>;
 
 		ports {
 			#address-cells = <1>;
@@ -1179,7 +1179,7 @@
 		};
 	};
 
-	rt1019p_pins_default: rt1019p-default-pins {
+	speaker_codec_pins_default: speaker-codec-default-pins {
 		pins-sdb {
 			pinmux = <PINMUX_GPIO150__FUNC_GPIO150>;
 			output-low;
@@ -1336,7 +1336,7 @@
 				regulator-allowed-modes = <MT6397_BUCK_MODE_AUTO
 							   MT6397_BUCK_MODE_FORCE_PWM>;
 				regulator-coupled-with = <&mt6366_vsram_gpu_reg>;
-				regulator-coupled-max-spread = <10000>;
+				regulator-coupled-max-spread = <100000>;
 			};
 
 			mt6366_vproc11_reg: vproc11 {
@@ -1545,7 +1545,7 @@
 				regulator-ramp-delay = <6250>;
 				regulator-enable-ramp-delay = <240>;
 				regulator-coupled-with = <&mt6366_vgpu_reg>;
-				regulator-coupled-max-spread = <10000>;
+				regulator-coupled-max-spread = <100000>;
 			};
 
 			mt6366_vsram_others_reg: vsram-others {
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8186.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/mediatek/mt8186.dtsi
index 148c332018b0..ac34ba3afacb 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8186.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/mediatek/mt8186.dtsi
@@ -1570,6 +1570,8 @@
 			#address-cells = <2>;
 			#size-cells = <2>;
 			ranges;
+			wakeup-source;
+			mediatek,syscon-wakeup = <&pericfg 0x420 2>;
 			status = "disabled";
 
 			usb_host0: usb@11200000 {
@@ -1583,8 +1585,6 @@
 					 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_XHCI>;
 				clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck", "xhci_ck";
 				interrupts = <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH 0>;
-				mediatek,syscon-wakeup = <&pericfg 0x420 2>;
-				wakeup-source;
 				status = "disabled";
 			};
 		};
@@ -1636,6 +1636,8 @@
 			#address-cells = <2>;
 			#size-cells = <2>;
 			ranges;
+			wakeup-source;
+			mediatek,syscon-wakeup = <&pericfg 0x424 2>;
 			status = "disabled";
 
 			usb_host1: usb@11280000 {
@@ -1649,8 +1651,6 @@
 					 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_P1_XHCI>;
 				clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck","xhci_ck";
 				interrupts = <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH 0>;
-				mediatek,syscon-wakeup = <&pericfg 0x424 2>;
-				wakeup-source;
 				status = "disabled";
 			};
 		};
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8188.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/mediatek/mt8188.dtsi
index cd27966d2e3c..91beef22e0a9 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8188.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/mediatek/mt8188.dtsi
@@ -956,9 +956,9 @@
 					#size-cells = <0>;
 					#power-domain-cells = <1>;
 
-					power-domain@MT8188_POWER_DOMAIN_MFG1 {
+					mfg1: power-domain@MT8188_POWER_DOMAIN_MFG1 {
 						reg = <MT8188_POWER_DOMAIN_MFG1>;
-						clocks = <&topckgen CLK_APMIXED_MFGPLL>,
+						clocks = <&apmixedsys CLK_APMIXED_MFGPLL>,
 							 <&topckgen CLK_TOP_MFG_CORE_TMP>;
 						clock-names = "mfg", "alt";
 						mediatek,infracfg = <&infracfg_ao>;
@@ -1689,7 +1689,6 @@
 					 <&clk26m>;
 				clock-names = "ref", "da_ref";
 				#phy-cells = <1>;
-				status = "disabled";
 			};
 		};
 
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi
index 36e0b4cf9c43..99d5a1a6183f 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi
@@ -1420,7 +1420,6 @@
 
 		regulators {
 			mt6315_6_vbuck1: vbuck1 {
-				regulator-compatible = "vbuck1";
 				regulator-name = "Vbcpu";
 				regulator-min-microvolt = <400000>;
 				regulator-max-microvolt = <1193750>;
@@ -1430,7 +1429,6 @@
 			};
 
 			mt6315_6_vbuck3: vbuck3 {
-				regulator-compatible = "vbuck3";
 				regulator-name = "Vlcpu";
 				regulator-min-microvolt = <400000>;
 				regulator-max-microvolt = <1193750>;
@@ -1447,7 +1445,6 @@
 
 		regulators {
 			mt6315_7_vbuck1: vbuck1 {
-				regulator-compatible = "vbuck1";
 				regulator-name = "Vgpu";
 				regulator-min-microvolt = <400000>;
 				regulator-max-microvolt = <800000>;
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi
index 179ef9ba58c5..728bd8a6943f 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi
@@ -438,7 +438,7 @@
 		/* Realtek RT5682i or RT5682s, sharing the same configuration */
 		reg = <0x1a>;
 		interrupts-extended = <&pio 89 IRQ_TYPE_EDGE_BOTH>;
-		#sound-dai-cells = <0>;
+		#sound-dai-cells = <1>;
 		realtek,jd-src = <1>;
 
 		AVDD-supply = <&mt6359_vio18_ldo_reg>;
@@ -1181,7 +1181,7 @@
 		link-name = "ETDM1_OUT_BE";
 		mediatek,clk-provider = "cpu";
 		codec {
-			sound-dai = <&audio_codec>;
+			sound-dai = <&audio_codec 0>;
 		};
 	};
 
@@ -1189,7 +1189,7 @@
 		link-name = "ETDM2_IN_BE";
 		mediatek,clk-provider = "cpu";
 		codec {
-			sound-dai = <&audio_codec>;
+			sound-dai = <&audio_codec 0>;
 		};
 	};
 
@@ -1285,7 +1285,6 @@
 
 		regulators {
 			mt6315_6_vbuck1: vbuck1 {
-				regulator-compatible = "vbuck1";
 				regulator-name = "Vbcpu";
 				regulator-min-microvolt = <400000>;
 				regulator-max-microvolt = <1193750>;
@@ -1303,7 +1302,6 @@
 
 		regulators {
 			mt6315_7_vbuck1: vbuck1 {
-				regulator-compatible = "vbuck1";
 				regulator-name = "Vgpu";
 				regulator-min-microvolt = <400000>;
 				regulator-max-microvolt = <1193750>;
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8195-demo.dts linux-libre-6.12.79-gnu/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
index 31d424b8fc7c..bfb75296795c 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
@@ -137,7 +137,6 @@
 			richtek,vinovp-microvolt = <14500000>;
 
 			otg_vbus_regulator: usb-otg-vbus-regulator {
-				regulator-compatible = "usb-otg-vbus";
 				regulator-name = "usb-otg-vbus";
 				regulator-min-microvolt = <4425000>;
 				regulator-max-microvolt = <5825000>;
@@ -149,7 +148,6 @@
 			LDO_VIN3-supply = <&mt6360_buck2>;
 
 			mt6360_buck1: buck1 {
-				regulator-compatible = "BUCK1";
 				regulator-name = "mt6360,buck1";
 				regulator-min-microvolt = <300000>;
 				regulator-max-microvolt = <1300000>;
@@ -160,7 +158,6 @@
 			};
 
 			mt6360_buck2: buck2 {
-				regulator-compatible = "BUCK2";
 				regulator-name = "mt6360,buck2";
 				regulator-min-microvolt = <300000>;
 				regulator-max-microvolt = <1300000>;
@@ -171,7 +168,6 @@
 			};
 
 			mt6360_ldo1: ldo1 {
-				regulator-compatible = "LDO1";
 				regulator-name = "mt6360,ldo1";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <3600000>;
@@ -180,7 +176,6 @@
 			};
 
 			mt6360_ldo2: ldo2 {
-				regulator-compatible = "LDO2";
 				regulator-name = "mt6360,ldo2";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <3600000>;
@@ -189,7 +184,6 @@
 			};
 
 			mt6360_ldo3: ldo3 {
-				regulator-compatible = "LDO3";
 				regulator-name = "mt6360,ldo3";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <3600000>;
@@ -198,7 +192,6 @@
 			};
 
 			mt6360_ldo5: ldo5 {
-				regulator-compatible = "LDO5";
 				regulator-name = "mt6360,ldo5";
 				regulator-min-microvolt = <2700000>;
 				regulator-max-microvolt = <3600000>;
@@ -207,7 +200,6 @@
 			};
 
 			mt6360_ldo6: ldo6 {
-				regulator-compatible = "LDO6";
 				regulator-name = "mt6360,ldo6";
 				regulator-min-microvolt = <500000>;
 				regulator-max-microvolt = <2100000>;
@@ -216,7 +208,6 @@
 			};
 
 			mt6360_ldo7: ldo7 {
-				regulator-compatible = "LDO7";
 				regulator-name = "mt6360,ldo7";
 				regulator-min-microvolt = <500000>;
 				regulator-max-microvolt = <2100000>;
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8195.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/mediatek/mt8195.dtsi
index e89ba384c4aa..451aa278bef5 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8195.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/mediatek/mt8195.dtsi
@@ -487,7 +487,7 @@
 		};
 
 		infracfg_ao: syscon@10001000 {
-			compatible = "mediatek,mt8195-infracfg_ao", "syscon", "simple-mfd";
+			compatible = "mediatek,mt8195-infracfg_ao", "syscon";
 			reg = <0 0x10001000 0 0x1000>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
@@ -617,22 +617,6 @@
 					#size-cells = <0>;
 					#power-domain-cells = <1>;
 
-					power-domain@MT8195_POWER_DOMAIN_VDEC1 {
-						reg = <MT8195_POWER_DOMAIN_VDEC1>;
-						clocks = <&vdecsys CLK_VDEC_LARB1>;
-						clock-names = "vdec1-0";
-						mediatek,infracfg = <&infracfg_ao>;
-						#power-domain-cells = <0>;
-					};
-
-					power-domain@MT8195_POWER_DOMAIN_VENC_CORE1 {
-						reg = <MT8195_POWER_DOMAIN_VENC_CORE1>;
-						clocks = <&vencsys_core1 CLK_VENC_CORE1_LARB>;
-						clock-names = "venc1-larb";
-						mediatek,infracfg = <&infracfg_ao>;
-						#power-domain-cells = <0>;
-					};
-
 					power-domain@MT8195_POWER_DOMAIN_VDOSYS0 {
 						reg = <MT8195_POWER_DOMAIN_VDOSYS0>;
 						clocks = <&topckgen CLK_TOP_CFG_VDO0>,
@@ -678,15 +662,25 @@
 							clocks = <&vdecsys_soc CLK_VDEC_SOC_LARB1>;
 							clock-names = "vdec0-0";
 							mediatek,infracfg = <&infracfg_ao>;
+							#address-cells = <1>;
+							#size-cells = <0>;
 							#power-domain-cells = <0>;
-						};
 
-						power-domain@MT8195_POWER_DOMAIN_VDEC2 {
-							reg = <MT8195_POWER_DOMAIN_VDEC2>;
-							clocks = <&vdecsys_core1 CLK_VDEC_CORE1_LARB1>;
-							clock-names = "vdec2-0";
-							mediatek,infracfg = <&infracfg_ao>;
-							#power-domain-cells = <0>;
+							power-domain@MT8195_POWER_DOMAIN_VDEC1 {
+								reg = <MT8195_POWER_DOMAIN_VDEC1>;
+								clocks = <&vdecsys CLK_VDEC_LARB1>;
+								clock-names = "vdec1-0";
+								mediatek,infracfg = <&infracfg_ao>;
+								#power-domain-cells = <0>;
+							};
+
+							power-domain@MT8195_POWER_DOMAIN_VDEC2 {
+								reg = <MT8195_POWER_DOMAIN_VDEC2>;
+								clocks = <&vdecsys_core1 CLK_VDEC_CORE1_LARB1>;
+								clock-names = "vdec2-0";
+								mediatek,infracfg = <&infracfg_ao>;
+								#power-domain-cells = <0>;
+							};
 						};
 
 						power-domain@MT8195_POWER_DOMAIN_VENC {
@@ -694,7 +688,17 @@
 							clocks = <&vencsys CLK_VENC_LARB>;
 							clock-names = "venc0-larb";
 							mediatek,infracfg = <&infracfg_ao>;
+							#address-cells = <1>;
+							#size-cells = <0>;
 							#power-domain-cells = <0>;
+
+							power-domain@MT8195_POWER_DOMAIN_VENC_CORE1 {
+								reg = <MT8195_POWER_DOMAIN_VENC_CORE1>;
+								clocks = <&vencsys_core1 CLK_VENC_CORE1_LARB>;
+								clock-names = "venc1-larb";
+								mediatek,infracfg = <&infracfg_ao>;
+								#power-domain-cells = <0>;
+							};
 						};
 
 						power-domain@MT8195_POWER_DOMAIN_VDOSYS1 {
@@ -1559,9 +1563,6 @@
 
 			power-domains = <&spm MT8195_POWER_DOMAIN_PCIE_MAC_P0>;
 
-			resets = <&infracfg_ao MT8195_INFRA_RST2_PCIE_P0_SWRST>;
-			reset-names = "mac";
-
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 7>;
 			interrupt-map = <0 0 0 1 &pcie_intc0 0>,
@@ -1611,9 +1612,6 @@
 			phy-names = "pcie-phy";
 			power-domains = <&spm MT8195_POWER_DOMAIN_PCIE_MAC_P1>;
 
-			resets = <&infracfg_ao MT8195_INFRA_RST2_PCIE_P1_SWRST>;
-			reset-names = "mac";
-
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 7>;
 			interrupt-map = <0 0 0 1 &pcie_intc1 0>,
@@ -3138,7 +3136,7 @@
 		};
 
 		ovl0: ovl@1c000000 {
-			compatible = "mediatek,mt8195-disp-ovl", "mediatek,mt8183-disp-ovl";
+			compatible = "mediatek,mt8195-disp-ovl";
 			reg = <0 0x1c000000 0 0x1000>;
 			interrupts = <GIC_SPI 636 IRQ_TYPE_LEVEL_HIGH 0>;
 			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
@@ -3331,11 +3329,9 @@
 		mutex1: mutex@1c101000 {
 			compatible = "mediatek,mt8195-disp-mutex";
 			reg = <0 0x1c101000 0 0x1000>;
-			reg-names = "vdo1_mutex";
 			interrupts = <GIC_SPI 494 IRQ_TYPE_LEVEL_HIGH 0>;
 			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
 			clocks = <&vdosys1 CLK_VDO1_DISP_MUTEX>;
-			clock-names = "vdo1_mutex";
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x1000 0x1000>;
 			mediatek,gce-events = <CMDQ_EVENT_VDO1_STREAM_DONE_ENG_0>;
 		};
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8365.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/mediatek/mt8365.dtsi
index 9c91fe8ea0f9..2bf8c9d02b6e 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8365.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/mediatek/mt8365.dtsi
@@ -449,7 +449,8 @@
 		};
 
 		keypad: keypad@10010000 {
-			compatible = "mediatek,mt6779-keypad";
+			compatible = "mediatek,mt8365-keypad",
+				     "mediatek,mt6779-keypad";
 			reg = <0 0x10010000 0 0x1000>;
 			wakeup-source;
 			interrupts = <GIC_SPI 124 IRQ_TYPE_EDGE_FALLING>;
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts linux-libre-6.12.79-gnu/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts
index 1ef6262b65c9..6f34b06a0359 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts
@@ -187,7 +187,7 @@
 		compatible = "snps,dwmac-mdio";
 		#address-cells = <1>;
 		#size-cells = <0>;
-		eth_phy0: eth-phy0@1 {
+		eth_phy0: ethernet-phy@1 {
 			compatible = "ethernet-phy-id001c.c916";
 			reg = <0x1>;
 		};
@@ -820,7 +820,6 @@
 
 		regulators {
 			mt6315_6_vbuck1: vbuck1 {
-				regulator-compatible = "vbuck1";
 				regulator-name = "Vbcpu";
 				regulator-min-microvolt = <300000>;
 				regulator-max-microvolt = <1193750>;
@@ -837,7 +836,6 @@
 
 		regulators {
 			mt6315_7_vbuck1: vbuck1 {
-				regulator-compatible = "vbuck1";
 				regulator-name = "Vgpu";
 				regulator-min-microvolt = <300000>;
 				regulator-max-microvolt = <1193750>;
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8395-kontron-3-5-sbc-i1200.dts linux-libre-6.12.79-gnu/arch/arm64/boot/dts/mediatek/mt8395-kontron-3-5-sbc-i1200.dts
index 1b89b56c357c..acdeb21cad0e 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8395-kontron-3-5-sbc-i1200.dts
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/mediatek/mt8395-kontron-3-5-sbc-i1200.dts
@@ -351,7 +351,7 @@
 			LDO_VIN2-supply = <&vsys>;
 			LDO_VIN3-supply = <&vsys>;
 
-			mt6360_buck1: BUCK1 {
+			mt6360_buck1: buck1 {
 				regulator-name = "emi_vdd2";
 				regulator-min-microvolt = <600000>;
 				regulator-max-microvolt = <1800000>;
@@ -361,7 +361,7 @@
 				regulator-always-on;
 			};
 
-			mt6360_buck2: BUCK2 {
+			mt6360_buck2: buck2 {
 				regulator-name = "emi_vddq";
 				regulator-min-microvolt = <300000>;
 				regulator-max-microvolt = <1300000>;
@@ -371,7 +371,7 @@
 				regulator-always-on;
 			};
 
-			mt6360_ldo1: LDO1 {
+			mt6360_ldo1: ldo1 {
 				regulator-name = "mt6360_ldo1"; /* Test point */
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <3600000>;
@@ -379,7 +379,7 @@
 							   MT6360_OPMODE_LP>;
 			};
 
-			mt6360_ldo2: LDO2 {
+			mt6360_ldo2: ldo2 {
 				regulator-name = "panel1_p1v8";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
@@ -387,7 +387,7 @@
 							   MT6360_OPMODE_LP>;
 			};
 
-			mt6360_ldo3: LDO3 {
+			mt6360_ldo3: ldo3 {
 				regulator-name = "vmc_pmu";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <3300000>;
@@ -395,7 +395,7 @@
 							   MT6360_OPMODE_LP>;
 			};
 
-			mt6360_ldo5: LDO5 {
+			mt6360_ldo5: ldo5 {
 				regulator-name = "vmch_pmu";
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3300000>;
@@ -403,7 +403,7 @@
 							   MT6360_OPMODE_LP>;
 			};
 
-			mt6360_ldo6: LDO6 {
+			mt6360_ldo6: ldo6 {
 				regulator-name = "mt6360_ldo6"; /* Test point */
 				regulator-min-microvolt = <500000>;
 				regulator-max-microvolt = <2100000>;
@@ -411,7 +411,7 @@
 							   MT6360_OPMODE_LP>;
 			};
 
-			mt6360_ldo7: LDO7 {
+			mt6360_ldo7: ldo7 {
 				regulator-name = "emi_vmddr_en";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts linux-libre-6.12.79-gnu/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts
index 14ec970c4e49..41dc34837b02 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts
@@ -812,7 +812,6 @@
 
 		regulators {
 			mt6315_6_vbuck1: vbuck1 {
-				regulator-compatible = "vbuck1";
 				regulator-name = "Vbcpu";
 				regulator-min-microvolt = <300000>;
 				regulator-max-microvolt = <1193750>;
@@ -829,7 +828,6 @@
 
 		regulators {
 			mt6315_7_vbuck1: vbuck1 {
-				regulator-compatible = "vbuck1";
 				regulator-name = "Vgpu";
 				regulator-min-microvolt = <300000>;
 				regulator-max-microvolt = <1193750>;
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8516-pumpkin.dts linux-libre-6.12.79-gnu/arch/arm64/boot/dts/mediatek/mt8516-pumpkin.dts
index cce642c53812..3d3db33a64dc 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8516-pumpkin.dts
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/mediatek/mt8516-pumpkin.dts
@@ -11,7 +11,7 @@
 
 / {
 	model = "Pumpkin MT8516";
-	compatible = "mediatek,mt8516";
+	compatible = "mediatek,mt8516-pumpkin", "mediatek,mt8516";
 
 	memory@40000000 {
 		device_type = "memory";
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8516.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/mediatek/mt8516.dtsi
index d0b03dc4d3f4..e30623ebac0e 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/mt8516.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/mediatek/mt8516.dtsi
@@ -144,10 +144,10 @@
 		#size-cells = <2>;
 		ranges;
 
-		/* 128 KiB reserved for ARM Trusted Firmware (BL31) */
+		/* 192 KiB reserved for ARM Trusted Firmware (BL31) */
 		bl31_secmon_reserved: secmon@43000000 {
 			no-map;
-			reg = <0 0x43000000 0 0x20000>;
+			reg = <0 0x43000000 0 0x30000>;
 		};
 	};
 
@@ -206,7 +206,7 @@
 			compatible = "mediatek,mt8516-wdt",
 				     "mediatek,mt6589-wdt";
 			reg = <0 0x10007000 0 0x1000>;
-			interrupts = <GIC_SPI 198 IRQ_TYPE_EDGE_FALLING>;
+			interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>;
 			#reset-cells = <1>;
 		};
 
@@ -268,7 +268,7 @@
 			interrupt-parent = <&gic>;
 			interrupt-controller;
 			reg = <0 0x10310000 0 0x1000>,
-			      <0 0x10320000 0 0x1000>,
+			      <0 0x1032f000 0 0x2000>,
 			      <0 0x10340000 0 0x2000>,
 			      <0 0x10360000 0 0x2000>;
 			interrupts = <GIC_PPI 9
@@ -344,6 +344,7 @@
 			reg = <0 0x11009000 0 0x90>,
 			      <0 0x11000180 0 0x80>;
 			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_LOW>;
+			clock-div = <2>;
 			clocks = <&topckgen CLK_TOP_I2C0>,
 				 <&topckgen CLK_TOP_APDMA>;
 			clock-names = "main", "dma";
@@ -358,6 +359,7 @@
 			reg = <0 0x1100a000 0 0x90>,
 			      <0 0x11000200 0 0x80>;
 			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_LOW>;
+			clock-div = <2>;
 			clocks = <&topckgen CLK_TOP_I2C1>,
 				 <&topckgen CLK_TOP_APDMA>;
 			clock-names = "main", "dma";
@@ -372,6 +374,7 @@
 			reg = <0 0x1100b000 0 0x90>,
 			      <0 0x11000280 0 0x80>;
 			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_LOW>;
+			clock-div = <2>;
 			clocks = <&topckgen CLK_TOP_I2C2>,
 				 <&topckgen CLK_TOP_APDMA>;
 			clock-names = "main", "dma";
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
index ec8dfb3d1c6d..a356db5fcc5f 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
@@ -47,7 +47,6 @@
 };
 
 &i2c0 {
-	clock-div = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c0_pins_a>;
 	status = "okay";
@@ -156,7 +155,6 @@
 };
 
 &i2c2 {
-	clock-div = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c2_pins_a>;
 	status = "okay";
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/nvidia/tegra186.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/nvidia/tegra186.dtsi
index 2b3bb5d0af17..f0b7949df92c 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/nvidia/tegra186.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/nvidia/tegra186.dtsi
@@ -621,9 +621,7 @@
 		reg-shift = <2>;
 		interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&bpmp TEGRA186_CLK_UARTB>;
-		clock-names = "serial";
 		resets = <&bpmp TEGRA186_RESET_UARTB>;
-		reset-names = "serial";
 		status = "disabled";
 	};
 
@@ -633,9 +631,7 @@
 		reg-shift = <2>;
 		interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&bpmp TEGRA186_CLK_UARTD>;
-		clock-names = "serial";
 		resets = <&bpmp TEGRA186_RESET_UARTD>;
-		reset-names = "serial";
 		status = "disabled";
 	};
 
@@ -645,9 +641,7 @@
 		reg-shift = <2>;
 		interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&bpmp TEGRA186_CLK_UARTE>;
-		clock-names = "serial";
 		resets = <&bpmp TEGRA186_RESET_UARTE>;
-		reset-names = "serial";
 		status = "disabled";
 	};
 
@@ -657,9 +651,7 @@
 		reg-shift = <2>;
 		interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&bpmp TEGRA186_CLK_UARTF>;
-		clock-names = "serial";
 		resets = <&bpmp TEGRA186_RESET_UARTF>;
-		reset-names = "serial";
 		status = "disabled";
 	};
 
@@ -1236,9 +1228,7 @@
 		reg-shift = <2>;
 		interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&bpmp TEGRA186_CLK_UARTC>;
-		clock-names = "serial";
 		resets = <&bpmp TEGRA186_RESET_UARTC>;
-		reset-names = "serial";
 		status = "disabled";
 	};
 
@@ -1248,9 +1238,7 @@
 		reg-shift = <2>;
 		interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&bpmp TEGRA186_CLK_UARTG>;
-		clock-names = "serial";
 		resets = <&bpmp TEGRA186_RESET_UARTG>;
-		reset-names = "serial";
 		status = "disabled";
 	};
 
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/nvidia/tegra194.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/nvidia/tegra194.dtsi
index 33f92b77cd9d..c36950774785 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/nvidia/tegra194.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/nvidia/tegra194.dtsi
@@ -766,9 +766,7 @@
 			reg-shift = <2>;
 			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&bpmp TEGRA194_CLK_UARTD>;
-			clock-names = "serial";
 			resets = <&bpmp TEGRA194_RESET_UARTD>;
-			reset-names = "serial";
 			status = "disabled";
 		};
 
@@ -778,9 +776,7 @@
 			reg-shift = <2>;
 			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&bpmp TEGRA194_CLK_UARTE>;
-			clock-names = "serial";
 			resets = <&bpmp TEGRA194_RESET_UARTE>;
-			reset-names = "serial";
 			status = "disabled";
 		};
 
@@ -790,9 +786,7 @@
 			reg-shift = <2>;
 			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&bpmp TEGRA194_CLK_UARTF>;
-			clock-names = "serial";
 			resets = <&bpmp TEGRA194_RESET_UARTF>;
-			reset-names = "serial";
 			status = "disabled";
 		};
 
@@ -817,9 +811,7 @@
 			reg-shift = <2>;
 			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&bpmp TEGRA194_CLK_UARTH>;
-			clock-names = "serial";
 			resets = <&bpmp TEGRA194_RESET_UARTH>;
-			reset-names = "serial";
 			status = "disabled";
 		};
 
@@ -1616,9 +1608,7 @@
 			reg-shift = <2>;
 			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&bpmp TEGRA194_CLK_UARTC>;
-			clock-names = "serial";
 			resets = <&bpmp TEGRA194_RESET_UARTC>;
-			reset-names = "serial";
 			status = "disabled";
 		};
 
@@ -1628,9 +1618,7 @@
 			reg-shift = <2>;
 			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&bpmp TEGRA194_CLK_UARTG>;
-			clock-names = "serial";
 			resets = <&bpmp TEGRA194_RESET_UARTG>;
-			reset-names = "serial";
 			status = "disabled";
 		};
 
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
index c00db75e3910..9c1b2e7d3997 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
@@ -11,6 +11,7 @@
 		rtc0 = "/i2c@7000d000/pmic@3c";
 		rtc1 = "/rtc@7000e000";
 		serial0 = &uarta;
+		serial3 = &uartd;
 	};
 
 	chosen {
@@ -351,7 +352,7 @@
 		#size-cells = <0>;
 
 		wifi@1 {
-			compatible = "brcm,bcm4354-fmac";
+			compatible = "brcm,bcm4354-fmac", "brcm,bcm4329-fmac";
 			reg = <1>;
 			interrupt-parent = <&gpio>;
 			interrupts = <TEGRA_GPIO(H, 2) IRQ_TYPE_LEVEL_HIGH>;
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
index 63b94a04308e..38d49d612c0c 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
@@ -1686,7 +1686,7 @@
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 		regulator-always-on;
-		gpio = <&exp1 14 GPIO_ACTIVE_HIGH>;
+		gpio = <&exp1 9 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 		vin-supply = <&vdd_1v8>;
 	};
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts linux-libre-6.12.79-gnu/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts
index 2e5b6b2c1f56..ff2952fae35c 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts
@@ -1782,6 +1782,8 @@
 				status = "okay";
 				vbus-supply = <&usbc_vbus>;
 				mode = "otg";
+				usb-role-switch;
+				role-switch-default-mode = "host";
 			};
 
 			usb3-0 {
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/nvidia/tegra234-p3740-0002+p3701-0008.dts linux-libre-6.12.79-gnu/arch/arm64/boot/dts/nvidia/tegra234-p3740-0002+p3701-0008.dts
index 36e888053746..9ce55b4d2de8 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/nvidia/tegra234-p3740-0002+p3701-0008.dts
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/nvidia/tegra234-p3740-0002+p3701-0008.dts
@@ -302,6 +302,16 @@
 		};
 
 		pcie@141a0000 {
+			reg = <0x00 0x141a0000 0x0 0x00020000   /* appl registers (128K)      */
+			       0x00 0x3a000000 0x0 0x00040000   /* configuration space (256K) */
+			       0x00 0x3a040000 0x0 0x00040000   /* iATU_DMA reg space (256K)  */
+			       0x00 0x3a080000 0x0 0x00040000   /* DBI reg space (256K)       */
+			       0x2e 0x20000000 0x0 0x10000000>; /* ECAM (256MB)               */
+
+			ranges = <0x81000000 0x00 0x3a100000 0x00 0x3a100000 0x0 0x00100000      /* downstream I/O (1MB) */
+				  0x82000000 0x00 0x40000000 0x2e 0x30000000 0x0 0x08000000      /* non-prefetchable memory (128MB) */
+				  0xc3000000 0x28 0x00000000 0x28 0x00000000 0x6 0x20000000>;    /* prefetchable memory (25088MB) */
+
 			status = "okay";
 			vddio-pex-ctl-supply = <&vdd_1v8_ls>;
 			phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>,
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767.dtsi
index 19340d13f789..41821354bbda 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767.dtsi
@@ -227,13 +227,6 @@
 			wakeup-event-action = <EV_ACT_ASSERTED>;
 			wakeup-source;
 		};
-
-		key-suspend {
-			label = "Suspend";
-			gpios = <&gpio TEGRA234_MAIN_GPIO(G, 2) GPIO_ACTIVE_LOW>;
-			linux,input-type = <EV_KEY>;
-			linux,code = <KEY_SLEEP>;
-		};
 	};
 
 	fan: pwm-fan {
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/nvidia/tegra234.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/nvidia/tegra234.dtsi
index 984c85eab41a..2601b43b2d8c 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/nvidia/tegra234.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/nvidia/tegra234.dtsi
@@ -3815,7 +3815,7 @@
 			compatible = "nvidia,tegra234-sce-fabric";
 			reg = <0x0 0xb600000 0x0 0x40000>;
 			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
-			status = "okay";
+			status = "disabled";
 		};
 
 		rce-fabric@be00000 {
@@ -3900,7 +3900,7 @@
 			assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>;
 			resets = <&bpmp TEGRA234_RESET_SPI2>;
 			reset-names = "spi";
-			dmas = <&gpcdma 19>, <&gpcdma 19>;
+			dmas = <&gpcdma 16>, <&gpcdma 16>;
 			dma-names = "rx", "tx";
 			dma-coherent;
 			status = "disabled";
@@ -3995,7 +3995,7 @@
 		};
 
 		dce-fabric@de00000 {
-			compatible = "nvidia,tegra234-sce-fabric";
+			compatible = "nvidia,tegra234-dce-fabric";
 			reg = <0x0 0xde00000 0x0 0x40000>;
 			interrupts = <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH>;
 			status = "okay";
@@ -4018,6 +4018,8 @@
 			#redistributor-regions = <1>;
 			#interrupt-cells = <3>;
 			interrupt-controller;
+
+			#address-cells = <0>;
 		};
 
 		smmu_iso: iommu@10000000 {
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/Makefile linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/Makefile
index ae002c7cf126..b13c169ec70d 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/Makefile
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/Makefile
@@ -207,6 +207,9 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-cheza-r1.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-cheza-r2.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-cheza-r3.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-db845c.dtb
+
+sdm845-db845c-navigation-mezzanine-dtbs	:= sdm845-db845c.dtb sdm845-db845c-navigation-mezzanine.dtbo
+
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-db845c-navigation-mezzanine.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-lg-judyln.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-lg-judyp.dtb
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi
index 91e104b0f865..a5294a42c287 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi
@@ -111,6 +111,13 @@
 			regulator-always-on;
 			regulator-boot-on;
 		};
+
+		mp5496_l5: l5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
 	};
 };
 
@@ -146,7 +153,7 @@
 };
 
 &usb_0_qmpphy {
-	vdda-pll-supply = <&mp5496_l2>;
+	vdda-pll-supply = <&mp5496_l5>;
 	vdda-phy-supply = <&regulator_fixed_0p925>;
 
 	status = "okay";
@@ -154,7 +161,7 @@
 
 &usb_0_qusbphy {
 	vdd-supply = <&regulator_fixed_0p925>;
-	vdda-pll-supply = <&mp5496_l2>;
+	vdda-pll-supply = <&mp5496_l5>;
 	vdda-phy-dpdm-supply = <&regulator_fixed_3p3>;
 
 	status = "okay";
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/ipq9574.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/ipq9574.dtsi
index 08a82a5cf667..81ccd0600c5a 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/ipq9574.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/ipq9574.dtsi
@@ -261,6 +261,8 @@
 			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
 			#dma-cells = <1>;
 			qcom,ee = <1>;
+			qcom,num-ees = <4>;
+			num-channels = <16>;
 			qcom,controlled-remotely;
 		};
 
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/msm8916.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 0ee44706b70b..b0f1c1b2e6f3 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -125,7 +125,7 @@
 		sleep_clk: sleep-clk {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
-			clock-frequency = <32768>;
+			clock-frequency = <32764>;
 		};
 	};
 
@@ -1540,6 +1540,8 @@
 
 			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
 
+			resets = <&gcc GCC_MDSS_BCR>;
+
 			interrupt-controller;
 			#interrupt-cells = <1>;
 
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/msm8939.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/msm8939.dtsi
index 7af210789879..39493f75c0dc 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/msm8939.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/msm8939.dtsi
@@ -34,7 +34,7 @@
 		sleep_clk: sleep-clk {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
-			clock-frequency = <32768>;
+			clock-frequency = <32764>;
 		};
 	};
 
@@ -1218,6 +1218,8 @@
 
 			power-domains = <&gcc MDSS_GDSC>;
 
+			resets = <&gcc GCC_MDSS_BCR>;
+
 			#address-cells = <1>;
 			#size-cells = <1>;
 			#interrupt-cells = <1>;
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/msm8976.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/msm8976.dtsi
index 06af6e5ec578..884b5bb54ba8 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/msm8976.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/msm8976.dtsi
@@ -1330,6 +1330,7 @@
 			clock-names = "bam_clk";
 			#dma-cells = <1>;
 			qcom,ee = <0>;
+			qcom,controlled-remotely;
 		};
 
 		blsp1_uart1: serial@78af000 {
@@ -1450,6 +1451,7 @@
 			clock-names = "bam_clk";
 			#dma-cells = <1>;
 			qcom,ee = <0>;
+			qcom,controlled-remotely;
 		};
 
 		blsp2_uart2: serial@7af0000 {
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi
index 10cd244dea4f..ef8dfce8d9b2 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi
@@ -378,7 +378,7 @@
 	status = "okay";
 
 	sideinteraction: touch@2c {
-		compatible = "ad,ad7147_captouch";
+		compatible = "adi,ad7147_captouch";
 		reg = <0x2c>;
 
 		pinctrl-names = "default", "sleep";
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/msm8994.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/msm8994.dtsi
index fc2a7f13f690..8a7de1dba2b9 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/msm8994.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/msm8994.dtsi
@@ -34,7 +34,7 @@
 		sleep_clk: sleep-clk {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
-			clock-frequency = <32768>;
+			clock-frequency = <32764>;
 			clock-output-names = "sleep_clk";
 		};
 	};
@@ -437,6 +437,15 @@
 			#size-cells = <1>;
 			ranges;
 
+			interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pwr_event",
+					  "qusb2_phy",
+					  "hs_phy_irq",
+					  "ss_phy_irq";
+
 			clocks = <&gcc GCC_USB30_MASTER_CLK>,
 				 <&gcc GCC_SYS_NOC_USB3_AXI_CLK>,
 				 <&gcc GCC_USB30_SLEEP_CLK>,
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts
index 2b7e295d4ede..9bc1115c54c8 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts
@@ -64,7 +64,7 @@
 		};
 
 		led@1 {
-			reg = <0>;
+			reg = <1>;
 			chan-name = "button-backlight1";
 			led-cur = /bits/ 8 <0x32>;
 			max-cur = /bits/ 8 <0xc8>;
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/msm8996.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/msm8996.dtsi
index e5966724f37c..932994f65b25 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -3065,9 +3065,14 @@
 			#size-cells = <1>;
 			ranges;
 
-			interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "hs_phy_irq", "ss_phy_irq";
+			interrupt-names = "pwr_event",
+					  "qusb2_phy",
+					  "hs_phy_irq",
+					  "ss_phy_irq";
 
 			clocks = <&gcc GCC_SYS_NOC_USB3_AXI_CLK>,
 				 <&gcc GCC_USB30_MASTER_CLK>,
@@ -3444,6 +3449,9 @@
 					  <&gcc GCC_USB20_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <60000000>;
 
+			interconnects = <&pnoc MASTER_USB_HS &bimc SLAVE_EBI_CH0>,
+					<&bimc MASTER_AMPSS_M0 &pnoc SLAVE_USB_HS>;
+			interconnect-names = "usb-ddr", "apps-usb";
 			power-domains = <&gcc USB30_GDSC>;
 			qcom,select-utmi-as-pipe-clk;
 			status = "disabled";
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/qcm2290.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/qcm2290.dtsi
index 79bc42ffb6a1..dbc78b2d5095 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/qcm2290.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/qcm2290.dtsi
@@ -1073,7 +1073,7 @@
 				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
 						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
 						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
-						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
 				interconnect-names = "qup-core",
 						     "qup-config";
 				#address-cells = <1>;
@@ -1092,7 +1092,7 @@
 				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
 						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
 						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
-						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
 				interconnect-names = "qup-core",
 						     "qup-config";
 				status = "disabled";
@@ -1137,7 +1137,7 @@
 				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
 						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
 						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
-						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
 				interconnect-names = "qup-core",
 						     "qup-config";
 				#address-cells = <1>;
@@ -1184,7 +1184,7 @@
 				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
 						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
 						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
-						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
 				interconnect-names = "qup-core",
 						     "qup-config";
 				#address-cells = <1>;
@@ -1231,7 +1231,7 @@
 				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
 						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
 						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
-						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
 				interconnect-names = "qup-core",
 						     "qup-config";
 				#address-cells = <1>;
@@ -1278,7 +1278,7 @@
 				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
 						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
 						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
-						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
 				interconnect-names = "qup-core",
 						     "qup-config";
 				#address-cells = <1>;
@@ -1297,7 +1297,7 @@
 				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
 						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
 						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
-						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
 				interconnect-names = "qup-core",
 						     "qup-config";
 				status = "disabled";
@@ -1342,7 +1342,7 @@
 				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
 						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
 						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
-						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
 				interconnect-names = "qup-core",
 						     "qup-config";
 				#address-cells = <1>;
@@ -1405,6 +1405,7 @@
 				snps,has-lpm-erratum;
 				snps,hird-threshold = /bits/ 8 <0x10>;
 				snps,usb3_lpm_capable;
+				snps,parkmode-disable-ss-quirk;
 				maximum-speed = "super-speed";
 				dr_mode = "otg";
 				usb-role-switch;
@@ -1433,8 +1434,12 @@
 
 		gpu: gpu@5900000 {
 			compatible = "qcom,adreno-07000200", "qcom,adreno";
-			reg = <0x0 0x05900000 0x0 0x40000>;
-			reg-names = "kgsl_3d0_reg_memory";
+			reg = <0x0 0x05900000 0x0 0x40000>,
+			      <0x0 0x0599e000 0x0 0x1000>,
+			      <0x0 0x05961000 0x0 0x800>;
+			reg-names = "kgsl_3d0_reg_memory",
+				    "cx_mem",
+				    "cx_dbgc";
 
 			interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
 
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/qcm6490-shift-otter.dts linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/qcm6490-shift-otter.dts
index 11a6fbe0d186..d081e7efeed1 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/qcm6490-shift-otter.dts
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/qcm6490-shift-otter.dts
@@ -118,6 +118,11 @@
 			no-map;
 		};
 
+		removed_mem: removed@c0000000 {
+			reg = <0x0 0xc0000000 0x0 0x5100000>;
+			no-map;
+		};
+
 		rmtfs_mem: rmtfs@f8500000 {
 			compatible = "qcom,rmtfs-mem";
 			reg = <0x0 0xf8500000 0x0 0x600000>;
@@ -942,8 +947,6 @@
 
 	qcom,squelch-detector-bp = <(-2090)>;
 
-	orientation-switch;
-
 	status = "okay";
 };
 
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/qcs404.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/qcs404.dtsi
index cddc16bac0ce..81a161c0cc5a 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/qcs404.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/qcs404.dtsi
@@ -28,7 +28,7 @@
 		sleep_clk: sleep-clk {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
-			clock-frequency = <32768>;
+			clock-frequency = <32764>;
 		};
 	};
 
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/qcs8550-aim300.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/qcs8550-aim300.dtsi
index f6960e2d466a..e6ac529e6b72 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/qcs8550-aim300.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/qcs8550-aim300.dtsi
@@ -367,7 +367,7 @@
 };
 
 &sleep_clk {
-	clock-frequency = <32000>;
+	clock-frequency = <32764>;
 };
 
 &ufs_mem_hc {
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/qdu1000-idp.dts linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/qdu1000-idp.dts
index e65305f8136c..c73eda75faf8 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/qdu1000-idp.dts
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/qdu1000-idp.dts
@@ -31,7 +31,7 @@
 
 		sleep_clk: sleep-clk {
 			compatible = "fixed-clock";
-			clock-frequency = <32000>;
+			clock-frequency = <32764>;
 			#clock-cells = <0>;
 		};
 	};
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
index 58b325af5ff6..f7d1141c0f11 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
@@ -545,7 +545,7 @@
 };
 
 &sleep_clk {
-	clock-frequency = <32000>;
+	clock-frequency = <32764>;
 };
 
 &tlmm {
@@ -636,7 +636,7 @@
 
 &uart3 {
 	interrupts-extended = <&intc GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
-			      <&tlmm 11 IRQ_TYPE_LEVEL_HIGH>;
+			      <&tlmm 11 IRQ_TYPE_EDGE_FALLING>;
 	pinctrl-0 = <&uart3_default>;
 	pinctrl-1 = <&uart3_sleep>;
 	pinctrl-names = "default", "sleep";
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/qru1000-idp.dts linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/qru1000-idp.dts
index 1c781d9e24cf..52ce51e56e2f 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/qru1000-idp.dts
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/qru1000-idp.dts
@@ -31,7 +31,7 @@
 
 		sleep_clk: sleep-clk {
 			compatible = "fixed-clock";
-			clock-frequency = <32000>;
+			clock-frequency = <32764>;
 			#clock-cells = <0>;
 		};
 	};
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi
index f7d1ac3322dc..30f2cd81ce76 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi
@@ -517,7 +517,7 @@
 };
 
 &sleep_clk {
-	clock-frequency = <32764>;
+	clock-frequency = <32000>;
 };
 
 &spi16 {
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sa8775p.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/sa8775p.dtsi
index e8dbc8d820a6..60f3b545304b 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sa8775p.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/sa8775p.dtsi
@@ -1940,6 +1940,7 @@
 
 			qcom,cmb-element-bits = <32>;
 			qcom,cmb-msrs-num = <32>;
+			status = "disabled";
 
 			out-ports {
 				port {
@@ -3796,8 +3797,8 @@
 
 			interrupts-extended = <&intc GIC_SPI 768 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_gpdsp0_in 0 0>,
-					      <&smp2p_gpdsp0_in 2 0>,
 					      <&smp2p_gpdsp0_in 1 0>,
+					      <&smp2p_gpdsp0_in 2 0>,
 					      <&smp2p_gpdsp0_in 3 0>;
 			interrupt-names = "wdog", "fatal", "ready",
 					  "handover", "stop-ack";
@@ -3839,8 +3840,8 @@
 
 			interrupts-extended = <&intc GIC_SPI 624 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_gpdsp1_in 0 0>,
-					      <&smp2p_gpdsp1_in 2 0>,
 					      <&smp2p_gpdsp1_in 1 0>,
+					      <&smp2p_gpdsp1_in 2 0>,
 					      <&smp2p_gpdsp1_in 3 0>;
 			interrupt-names = "wdog", "fatal", "ready",
 					  "handover", "stop-ack";
@@ -3964,8 +3965,8 @@
 
 			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_cdsp0_in 0 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_cdsp0_in 2 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_cdsp0_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp0_in 2 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_cdsp0_in 3 IRQ_TYPE_EDGE_RISING>;
 			interrupt-names = "wdog", "fatal", "ready",
 					  "handover", "stop-ack";
@@ -4011,15 +4012,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <1>;
 						iommus = <&apps_smmu 0x2141 0x04a0>,
-							 <&apps_smmu 0x2161 0x04a0>,
-							 <&apps_smmu 0x2181 0x0400>,
-							 <&apps_smmu 0x21c1 0x04a0>,
-							 <&apps_smmu 0x21e1 0x04a0>,
-							 <&apps_smmu 0x2541 0x04a0>,
-							 <&apps_smmu 0x2561 0x04a0>,
-							 <&apps_smmu 0x2581 0x0400>,
-							 <&apps_smmu 0x25c1 0x04a0>,
-							 <&apps_smmu 0x25e1 0x04a0>;
+							 <&apps_smmu 0x2181 0x0400>;
 						dma-coherent;
 					};
 
@@ -4027,15 +4020,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <2>;
 						iommus = <&apps_smmu 0x2142 0x04a0>,
-							 <&apps_smmu 0x2162 0x04a0>,
-							 <&apps_smmu 0x2182 0x0400>,
-							 <&apps_smmu 0x21c2 0x04a0>,
-							 <&apps_smmu 0x21e2 0x04a0>,
-							 <&apps_smmu 0x2542 0x04a0>,
-							 <&apps_smmu 0x2562 0x04a0>,
-							 <&apps_smmu 0x2582 0x0400>,
-							 <&apps_smmu 0x25c2 0x04a0>,
-							 <&apps_smmu 0x25e2 0x04a0>;
+							 <&apps_smmu 0x2182 0x0400>;
 						dma-coherent;
 					};
 
@@ -4043,15 +4028,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <3>;
 						iommus = <&apps_smmu 0x2143 0x04a0>,
-							 <&apps_smmu 0x2163 0x04a0>,
-							 <&apps_smmu 0x2183 0x0400>,
-							 <&apps_smmu 0x21c3 0x04a0>,
-							 <&apps_smmu 0x21e3 0x04a0>,
-							 <&apps_smmu 0x2543 0x04a0>,
-							 <&apps_smmu 0x2563 0x04a0>,
-							 <&apps_smmu 0x2583 0x0400>,
-							 <&apps_smmu 0x25c3 0x04a0>,
-							 <&apps_smmu 0x25e3 0x04a0>;
+							 <&apps_smmu 0x2183 0x0400>;
 						dma-coherent;
 					};
 
@@ -4059,15 +4036,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <4>;
 						iommus = <&apps_smmu 0x2144 0x04a0>,
-							 <&apps_smmu 0x2164 0x04a0>,
-							 <&apps_smmu 0x2184 0x0400>,
-							 <&apps_smmu 0x21c4 0x04a0>,
-							 <&apps_smmu 0x21e4 0x04a0>,
-							 <&apps_smmu 0x2544 0x04a0>,
-							 <&apps_smmu 0x2564 0x04a0>,
-							 <&apps_smmu 0x2584 0x0400>,
-							 <&apps_smmu 0x25c4 0x04a0>,
-							 <&apps_smmu 0x25e4 0x04a0>;
+							 <&apps_smmu 0x2184 0x0400>;
 						dma-coherent;
 					};
 
@@ -4075,15 +4044,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <5>;
 						iommus = <&apps_smmu 0x2145 0x04a0>,
-							 <&apps_smmu 0x2165 0x04a0>,
-							 <&apps_smmu 0x2185 0x0400>,
-							 <&apps_smmu 0x21c5 0x04a0>,
-							 <&apps_smmu 0x21e5 0x04a0>,
-							 <&apps_smmu 0x2545 0x04a0>,
-							 <&apps_smmu 0x2565 0x04a0>,
-							 <&apps_smmu 0x2585 0x0400>,
-							 <&apps_smmu 0x25c5 0x04a0>,
-							 <&apps_smmu 0x25e5 0x04a0>;
+							 <&apps_smmu 0x2185 0x0400>;
 						dma-coherent;
 					};
 
@@ -4091,15 +4052,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <6>;
 						iommus = <&apps_smmu 0x2146 0x04a0>,
-							 <&apps_smmu 0x2166 0x04a0>,
-							 <&apps_smmu 0x2186 0x0400>,
-							 <&apps_smmu 0x21c6 0x04a0>,
-							 <&apps_smmu 0x21e6 0x04a0>,
-							 <&apps_smmu 0x2546 0x04a0>,
-							 <&apps_smmu 0x2566 0x04a0>,
-							 <&apps_smmu 0x2586 0x0400>,
-							 <&apps_smmu 0x25c6 0x04a0>,
-							 <&apps_smmu 0x25e6 0x04a0>;
+							 <&apps_smmu 0x2186 0x0400>;
 						dma-coherent;
 					};
 
@@ -4107,15 +4060,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <7>;
 						iommus = <&apps_smmu 0x2147 0x04a0>,
-							 <&apps_smmu 0x2167 0x04a0>,
-							 <&apps_smmu 0x2187 0x0400>,
-							 <&apps_smmu 0x21c7 0x04a0>,
-							 <&apps_smmu 0x21e7 0x04a0>,
-							 <&apps_smmu 0x2547 0x04a0>,
-							 <&apps_smmu 0x2567 0x04a0>,
-							 <&apps_smmu 0x2587 0x0400>,
-							 <&apps_smmu 0x25c7 0x04a0>,
-							 <&apps_smmu 0x25e7 0x04a0>;
+							 <&apps_smmu 0x2187 0x0400>;
 						dma-coherent;
 					};
 
@@ -4123,15 +4068,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <8>;
 						iommus = <&apps_smmu 0x2148 0x04a0>,
-							 <&apps_smmu 0x2168 0x04a0>,
-							 <&apps_smmu 0x2188 0x0400>,
-							 <&apps_smmu 0x21c8 0x04a0>,
-							 <&apps_smmu 0x21e8 0x04a0>,
-							 <&apps_smmu 0x2548 0x04a0>,
-							 <&apps_smmu 0x2568 0x04a0>,
-							 <&apps_smmu 0x2588 0x0400>,
-							 <&apps_smmu 0x25c8 0x04a0>,
-							 <&apps_smmu 0x25e8 0x04a0>;
+							 <&apps_smmu 0x2188 0x0400>;
 						dma-coherent;
 					};
 
@@ -4139,31 +4076,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <9>;
 						iommus = <&apps_smmu 0x2149 0x04a0>,
-							 <&apps_smmu 0x2169 0x04a0>,
-							 <&apps_smmu 0x2189 0x0400>,
-							 <&apps_smmu 0x21c9 0x04a0>,
-							 <&apps_smmu 0x21e9 0x04a0>,
-							 <&apps_smmu 0x2549 0x04a0>,
-							 <&apps_smmu 0x2569 0x04a0>,
-							 <&apps_smmu 0x2589 0x0400>,
-							 <&apps_smmu 0x25c9 0x04a0>,
-							 <&apps_smmu 0x25e9 0x04a0>;
-						dma-coherent;
-					};
-
-					compute-cb@10 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <10>;
-						iommus = <&apps_smmu 0x214a 0x04a0>,
-							 <&apps_smmu 0x216a 0x04a0>,
-							 <&apps_smmu 0x218a 0x0400>,
-							 <&apps_smmu 0x21ca 0x04a0>,
-							 <&apps_smmu 0x21ea 0x04a0>,
-							 <&apps_smmu 0x254a 0x04a0>,
-							 <&apps_smmu 0x256a 0x04a0>,
-							 <&apps_smmu 0x258a 0x0400>,
-							 <&apps_smmu 0x25ca 0x04a0>,
-							 <&apps_smmu 0x25ea 0x04a0>;
+							 <&apps_smmu 0x2189 0x0400>;
 						dma-coherent;
 					};
 
@@ -4171,15 +4084,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <11>;
 						iommus = <&apps_smmu 0x214b 0x04a0>,
-							 <&apps_smmu 0x216b 0x04a0>,
-							 <&apps_smmu 0x218b 0x0400>,
-							 <&apps_smmu 0x21cb 0x04a0>,
-							 <&apps_smmu 0x21eb 0x04a0>,
-							 <&apps_smmu 0x254b 0x04a0>,
-							 <&apps_smmu 0x256b 0x04a0>,
-							 <&apps_smmu 0x258b 0x0400>,
-							 <&apps_smmu 0x25cb 0x04a0>,
-							 <&apps_smmu 0x25eb 0x04a0>;
+							 <&apps_smmu 0x218b 0x0400>;
 						dma-coherent;
 					};
 				};
@@ -4192,8 +4097,8 @@
 
 			interrupts-extended = <&intc GIC_SPI 798 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_cdsp1_in 0 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_cdsp1_in 2 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_cdsp1_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp1_in 2 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_cdsp1_in 3 IRQ_TYPE_EDGE_RISING>;
 			interrupt-names = "wdog", "fatal", "ready",
 					  "handover", "stop-ack";
@@ -4239,15 +4144,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <1>;
 						iommus = <&apps_smmu 0x2941 0x04a0>,
-							 <&apps_smmu 0x2961 0x04a0>,
-							 <&apps_smmu 0x2981 0x0400>,
-							 <&apps_smmu 0x29c1 0x04a0>,
-							 <&apps_smmu 0x29e1 0x04a0>,
-							 <&apps_smmu 0x2d41 0x04a0>,
-							 <&apps_smmu 0x2d61 0x04a0>,
-							 <&apps_smmu 0x2d81 0x0400>,
-							 <&apps_smmu 0x2dc1 0x04a0>,
-							 <&apps_smmu 0x2de1 0x04a0>;
+							 <&apps_smmu 0x2981 0x0400>;
 						dma-coherent;
 					};
 
@@ -4255,15 +4152,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <2>;
 						iommus = <&apps_smmu 0x2942 0x04a0>,
-							 <&apps_smmu 0x2962 0x04a0>,
-							 <&apps_smmu 0x2982 0x0400>,
-							 <&apps_smmu 0x29c2 0x04a0>,
-							 <&apps_smmu 0x29e2 0x04a0>,
-							 <&apps_smmu 0x2d42 0x04a0>,
-							 <&apps_smmu 0x2d62 0x04a0>,
-							 <&apps_smmu 0x2d82 0x0400>,
-							 <&apps_smmu 0x2dc2 0x04a0>,
-							 <&apps_smmu 0x2de2 0x04a0>;
+							 <&apps_smmu 0x2982 0x0400>;
 						dma-coherent;
 					};
 
@@ -4271,15 +4160,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <3>;
 						iommus = <&apps_smmu 0x2943 0x04a0>,
-							 <&apps_smmu 0x2963 0x04a0>,
-							 <&apps_smmu 0x2983 0x0400>,
-							 <&apps_smmu 0x29c3 0x04a0>,
-							 <&apps_smmu 0x29e3 0x04a0>,
-							 <&apps_smmu 0x2d43 0x04a0>,
-							 <&apps_smmu 0x2d63 0x04a0>,
-							 <&apps_smmu 0x2d83 0x0400>,
-							 <&apps_smmu 0x2dc3 0x04a0>,
-							 <&apps_smmu 0x2de3 0x04a0>;
+							 <&apps_smmu 0x2983 0x0400>;
 						dma-coherent;
 					};
 
@@ -4287,15 +4168,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <4>;
 						iommus = <&apps_smmu 0x2944 0x04a0>,
-							 <&apps_smmu 0x2964 0x04a0>,
-							 <&apps_smmu 0x2984 0x0400>,
-							 <&apps_smmu 0x29c4 0x04a0>,
-							 <&apps_smmu 0x29e4 0x04a0>,
-							 <&apps_smmu 0x2d44 0x04a0>,
-							 <&apps_smmu 0x2d64 0x04a0>,
-							 <&apps_smmu 0x2d84 0x0400>,
-							 <&apps_smmu 0x2dc4 0x04a0>,
-							 <&apps_smmu 0x2de4 0x04a0>;
+							 <&apps_smmu 0x2984 0x0400>;
 						dma-coherent;
 					};
 
@@ -4303,15 +4176,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <5>;
 						iommus = <&apps_smmu 0x2945 0x04a0>,
-							 <&apps_smmu 0x2965 0x04a0>,
-							 <&apps_smmu 0x2985 0x0400>,
-							 <&apps_smmu 0x29c5 0x04a0>,
-							 <&apps_smmu 0x29e5 0x04a0>,
-							 <&apps_smmu 0x2d45 0x04a0>,
-							 <&apps_smmu 0x2d65 0x04a0>,
-							 <&apps_smmu 0x2d85 0x0400>,
-							 <&apps_smmu 0x2dc5 0x04a0>,
-							 <&apps_smmu 0x2de5 0x04a0>;
+							 <&apps_smmu 0x2985 0x0400>;
 						dma-coherent;
 					};
 
@@ -4319,15 +4184,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <6>;
 						iommus = <&apps_smmu 0x2946 0x04a0>,
-							 <&apps_smmu 0x2966 0x04a0>,
-							 <&apps_smmu 0x2986 0x0400>,
-							 <&apps_smmu 0x29c6 0x04a0>,
-							 <&apps_smmu 0x29e6 0x04a0>,
-							 <&apps_smmu 0x2d46 0x04a0>,
-							 <&apps_smmu 0x2d66 0x04a0>,
-							 <&apps_smmu 0x2d86 0x0400>,
-							 <&apps_smmu 0x2dc6 0x04a0>,
-							 <&apps_smmu 0x2de6 0x04a0>;
+							 <&apps_smmu 0x2986 0x0400>;
 						dma-coherent;
 					};
 
@@ -4335,15 +4192,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <7>;
 						iommus = <&apps_smmu 0x2947 0x04a0>,
-							 <&apps_smmu 0x2967 0x04a0>,
-							 <&apps_smmu 0x2987 0x0400>,
-							 <&apps_smmu 0x29c7 0x04a0>,
-							 <&apps_smmu 0x29e7 0x04a0>,
-							 <&apps_smmu 0x2d47 0x04a0>,
-							 <&apps_smmu 0x2d67 0x04a0>,
-							 <&apps_smmu 0x2d87 0x0400>,
-							 <&apps_smmu 0x2dc7 0x04a0>,
-							 <&apps_smmu 0x2de7 0x04a0>;
+							 <&apps_smmu 0x2987 0x0400>;
 						dma-coherent;
 					};
 
@@ -4351,15 +4200,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <8>;
 						iommus = <&apps_smmu 0x2948 0x04a0>,
-							 <&apps_smmu 0x2968 0x04a0>,
-							 <&apps_smmu 0x2988 0x0400>,
-							 <&apps_smmu 0x29c8 0x04a0>,
-							 <&apps_smmu 0x29e8 0x04a0>,
-							 <&apps_smmu 0x2d48 0x04a0>,
-							 <&apps_smmu 0x2d68 0x04a0>,
-							 <&apps_smmu 0x2d88 0x0400>,
-							 <&apps_smmu 0x2dc8 0x04a0>,
-							 <&apps_smmu 0x2de8 0x04a0>;
+							 <&apps_smmu 0x2988 0x0400>;
 						dma-coherent;
 					};
 
@@ -4367,15 +4208,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <9>;
 						iommus = <&apps_smmu 0x2949 0x04a0>,
-							 <&apps_smmu 0x2969 0x04a0>,
-							 <&apps_smmu 0x2989 0x0400>,
-							 <&apps_smmu 0x29c9 0x04a0>,
-							 <&apps_smmu 0x29e9 0x04a0>,
-							 <&apps_smmu 0x2d49 0x04a0>,
-							 <&apps_smmu 0x2d69 0x04a0>,
-							 <&apps_smmu 0x2d89 0x0400>,
-							 <&apps_smmu 0x2dc9 0x04a0>,
-							 <&apps_smmu 0x2de9 0x04a0>;
+							 <&apps_smmu 0x2989 0x0400>;
 						dma-coherent;
 					};
 
@@ -4383,15 +4216,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <10>;
 						iommus = <&apps_smmu 0x294a 0x04a0>,
-							 <&apps_smmu 0x296a 0x04a0>,
-							 <&apps_smmu 0x298a 0x0400>,
-							 <&apps_smmu 0x29ca 0x04a0>,
-							 <&apps_smmu 0x29ea 0x04a0>,
-							 <&apps_smmu 0x2d4a 0x04a0>,
-							 <&apps_smmu 0x2d6a 0x04a0>,
-							 <&apps_smmu 0x2d8a 0x0400>,
-							 <&apps_smmu 0x2dca 0x04a0>,
-							 <&apps_smmu 0x2dea 0x04a0>;
+							 <&apps_smmu 0x298a 0x0400>;
 						dma-coherent;
 					};
 
@@ -4399,15 +4224,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <11>;
 						iommus = <&apps_smmu 0x294b 0x04a0>,
-							 <&apps_smmu 0x296b 0x04a0>,
-							 <&apps_smmu 0x298b 0x0400>,
-							 <&apps_smmu 0x29cb 0x04a0>,
-							 <&apps_smmu 0x29eb 0x04a0>,
-							 <&apps_smmu 0x2d4b 0x04a0>,
-							 <&apps_smmu 0x2d6b 0x04a0>,
-							 <&apps_smmu 0x2d8b 0x0400>,
-							 <&apps_smmu 0x2dcb 0x04a0>,
-							 <&apps_smmu 0x2deb 0x04a0>;
+							 <&apps_smmu 0x298b 0x0400>;
 						dma-coherent;
 					};
 
@@ -4415,15 +4232,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <12>;
 						iommus = <&apps_smmu 0x294c 0x04a0>,
-							 <&apps_smmu 0x296c 0x04a0>,
-							 <&apps_smmu 0x298c 0x0400>,
-							 <&apps_smmu 0x29cc 0x04a0>,
-							 <&apps_smmu 0x29ec 0x04a0>,
-							 <&apps_smmu 0x2d4c 0x04a0>,
-							 <&apps_smmu 0x2d6c 0x04a0>,
-							 <&apps_smmu 0x2d8c 0x0400>,
-							 <&apps_smmu 0x2dcc 0x04a0>,
-							 <&apps_smmu 0x2dec 0x04a0>;
+							 <&apps_smmu 0x298c 0x0400>;
 						dma-coherent;
 					};
 
@@ -4431,15 +4240,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <13>;
 						iommus = <&apps_smmu 0x294d 0x04a0>,
-							 <&apps_smmu 0x296d 0x04a0>,
-							 <&apps_smmu 0x298d 0x0400>,
-							 <&apps_smmu 0x29Cd 0x04a0>,
-							 <&apps_smmu 0x29ed 0x04a0>,
-							 <&apps_smmu 0x2d4d 0x04a0>,
-							 <&apps_smmu 0x2d6d 0x04a0>,
-							 <&apps_smmu 0x2d8d 0x0400>,
-							 <&apps_smmu 0x2dcd 0x04a0>,
-							 <&apps_smmu 0x2ded 0x04a0>;
+							 <&apps_smmu 0x298d 0x0400>;
 						dma-coherent;
 					};
 				};
@@ -4452,8 +4253,8 @@
 
 			interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
 			interrupt-names = "wdog", "fatal", "ready", "handover",
 					  "stop-ack";
@@ -5587,7 +5388,7 @@
 		      <0x0 0x40000000 0x0 0xf20>,
 		      <0x0 0x40000f20 0x0 0xa8>,
 		      <0x0 0x40001000 0x0 0x4000>,
-		      <0x0 0x40200000 0x0 0x100000>,
+		      <0x0 0x40200000 0x0 0x1fe00000>,
 		      <0x0 0x01c03000 0x0 0x1000>,
 		      <0x0 0x40005000 0x0 0x2000>;
 		reg-names = "parf", "dbi", "elbi", "atu", "addr_space",
@@ -5744,7 +5545,7 @@
 		      <0x0 0x60000000 0x0 0xf20>,
 		      <0x0 0x60000f20 0x0 0xa8>,
 		      <0x0 0x60001000 0x0 0x4000>,
-		      <0x0 0x60200000 0x0 0x100000>,
+		      <0x0 0x60200000 0x0 0x1fe00000>,
 		      <0x0 0x01c13000 0x0 0x1000>,
 		      <0x0 0x60005000 0x0 0x2000>;
 		reg-names = "parf", "dbi", "elbi", "atu", "addr_space",
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sc7180-firmware-tfa.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/sc7180-firmware-tfa.dtsi
index ee35a454dbf6..59162b3afcb8 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sc7180-firmware-tfa.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/sc7180-firmware-tfa.dtsi
@@ -6,82 +6,82 @@
  * by Qualcomm firmware.
  */
 
-&CPU0 {
+&cpu0 {
 	/delete-property/ power-domains;
 	/delete-property/ power-domain-names;
 
-	cpu-idle-states = <&LITTLE_CPU_SLEEP_0
-			   &LITTLE_CPU_SLEEP_1
-			   &CLUSTER_SLEEP_0>;
+	cpu-idle-states = <&little_cpu_sleep_0
+			   &little_cpu_sleep_1
+			   &cluster_sleep_0>;
 };
 
-&CPU1 {
+&cpu1 {
 	/delete-property/ power-domains;
 	/delete-property/ power-domain-names;
 
-	cpu-idle-states = <&LITTLE_CPU_SLEEP_0
-			   &LITTLE_CPU_SLEEP_1
-			   &CLUSTER_SLEEP_0>;
+	cpu-idle-states = <&little_cpu_sleep_0
+			   &little_cpu_sleep_1
+			   &cluster_sleep_0>;
 };
 
-&CPU2 {
+&cpu2 {
 	/delete-property/ power-domains;
 	/delete-property/ power-domain-names;
 
-	cpu-idle-states = <&LITTLE_CPU_SLEEP_0
-			   &LITTLE_CPU_SLEEP_1
-			   &CLUSTER_SLEEP_0>;
+	cpu-idle-states = <&little_cpu_sleep_0
+			   &little_cpu_sleep_1
+			   &cluster_sleep_0>;
 };
 
-&CPU3 {
+&cpu3 {
 	/delete-property/ power-domains;
 	/delete-property/ power-domain-names;
 
-	cpu-idle-states = <&LITTLE_CPU_SLEEP_0
-			   &LITTLE_CPU_SLEEP_1
-			   &CLUSTER_SLEEP_0>;
+	cpu-idle-states = <&little_cpu_sleep_0
+			   &little_cpu_sleep_1
+			   &cluster_sleep_0>;
 };
 
-&CPU4 {
+&cpu4 {
 	/delete-property/ power-domains;
 	/delete-property/ power-domain-names;
 
-	cpu-idle-states = <&LITTLE_CPU_SLEEP_0
-			   &LITTLE_CPU_SLEEP_1
-			   &CLUSTER_SLEEP_0>;
+	cpu-idle-states = <&little_cpu_sleep_0
+			   &little_cpu_sleep_1
+			   &cluster_sleep_0>;
 };
 
-&CPU5 {
+&cpu5 {
 	/delete-property/ power-domains;
 	/delete-property/ power-domain-names;
 
-	cpu-idle-states = <&LITTLE_CPU_SLEEP_0
-			   &LITTLE_CPU_SLEEP_1
-			   &CLUSTER_SLEEP_0>;
+	cpu-idle-states = <&little_cpu_sleep_0
+			   &little_cpu_sleep_1
+			   &cluster_sleep_0>;
 };
 
-&CPU6 {
+&cpu6 {
 	/delete-property/ power-domains;
 	/delete-property/ power-domain-names;
 
-	cpu-idle-states = <&BIG_CPU_SLEEP_0
-			   &BIG_CPU_SLEEP_1
-			   &CLUSTER_SLEEP_0>;
+	cpu-idle-states = <&big_cpu_sleep_0
+			   &big_cpu_sleep_1
+			   &cluster_sleep_0>;
 };
 
-&CPU7 {
+&cpu7 {
 	/delete-property/ power-domains;
 	/delete-property/ power-domain-names;
 
-	cpu-idle-states = <&BIG_CPU_SLEEP_0
-			   &BIG_CPU_SLEEP_1
-			   &CLUSTER_SLEEP_0>;
+	cpu-idle-states = <&big_cpu_sleep_0
+			   &big_cpu_sleep_1
+			   &cluster_sleep_0>;
 };
 
 /delete-node/ &domain_idle_states;
 
 &idle_states {
-	CLUSTER_SLEEP_0: cluster-sleep-0 {
+	cluster_sleep_0: cluster-sleep-0 {
 		compatible = "arm,idle-state";
 		idle-state-name = "cluster-power-down";
 		arm,psci-suspend-param = <0x40003444>;
@@ -92,15 +92,15 @@
 	};
 };
 
-/delete-node/ &CPU_PD0;
-/delete-node/ &CPU_PD1;
-/delete-node/ &CPU_PD2;
-/delete-node/ &CPU_PD3;
-/delete-node/ &CPU_PD4;
-/delete-node/ &CPU_PD5;
-/delete-node/ &CPU_PD6;
-/delete-node/ &CPU_PD7;
-/delete-node/ &CLUSTER_PD;
+/delete-node/ &cpu_pd0;
+/delete-node/ &cpu_pd1;
+/delete-node/ &cpu_pd2;
+/delete-node/ &cpu_pd3;
+/delete-node/ &cpu_pd4;
+/delete-node/ &cpu_pd5;
+/delete-node/ &cpu_pd6;
+/delete-node/ &cpu_pd7;
+/delete-node/ &cluster_pd;
 
 &apps_rsc {
 	/delete-property/ power-domains;
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi
index 3c124bbe2f4c..25b17b0425f2 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi
@@ -53,14 +53,14 @@
 			cooling-maps {
 				map0 {
 					trip = <&skin_temp_alert0>;
-					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 
 				map1 {
 					trip = <&skin_temp_alert1>;
-					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi
index b2df22faafe8..f57976906d63 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi
@@ -71,14 +71,14 @@
 			cooling-maps {
 				map0 {
 					trip = <&skin_temp_alert0>;
-					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 
 				map1 {
 					trip = <&skin_temp_alert1>;
-					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi
index ac8d4589e3fb..f7300ffbb451 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi
@@ -12,11 +12,11 @@
 
 / {
 	thermal-zones {
-		5v-choke-thermal {
+		choke-5v-thermal {
 			thermal-sensors = <&pm6150_adc_tm 1>;
 
 			trips {
-				5v-choke-crit {
+				choke-5v-crit {
 					temperature = <125000>;
 					hysteresis = <1000>;
 					type = "critical";
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi
index 00229b1515e6..ff8996b4de4e 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi
@@ -78,6 +78,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&lcd_rst>;
 		avdd-supply = <&ppvar_lcd>;
+		avee-supply = <&ppvar_lcd>;
 		pp1800-supply = <&v1p8_disp>;
 		pp3300-supply = <&pp3300_dx_edp>;
 		backlight = <&backlight>;
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi
index af89d80426ab..d4925be3b1fc 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi
@@ -78,14 +78,14 @@
 			cooling-maps {
 				map0 {
 					trip = <&skin_temp_alert0>;
-					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 
 				map1 {
 					trip = <&skin_temp_alert1>;
-					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sc7180.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/sc7180.dtsi
index b5ebf8980325..6ae5ca00c718 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -77,28 +77,28 @@
 		#address-cells = <2>;
 		#size-cells = <0>;
 
-		CPU0: cpu@0 {
+		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "qcom,kryo468";
 			reg = <0x0 0x0>;
 			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
-			power-domains = <&CPU_PD0>;
+			power-domains = <&cpu_pd0>;
 			power-domain-names = "psci";
 			capacity-dmips-mhz = <415>;
 			dynamic-power-coefficient = <137>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
-			next-level-cache = <&L2_0>;
+			next-level-cache = <&l2_0>;
 			#cooling-cells = <2>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
-			L2_0: l2-cache {
+			l2_0: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
-				L3_0: l3-cache {
+				next-level-cache = <&l3_0>;
+				l3_0: l3-cache {
 					compatible = "cache";
 					cache-level = <3>;
 					cache-unified;
@@ -106,206 +106,206 @@
 			};
 		};
 
-		CPU1: cpu@100 {
+		cpu1: cpu@100 {
 			device_type = "cpu";
 			compatible = "qcom,kryo468";
 			reg = <0x0 0x100>;
 			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
-			power-domains = <&CPU_PD1>;
+			power-domains = <&cpu_pd1>;
 			power-domain-names = "psci";
 			capacity-dmips-mhz = <415>;
 			dynamic-power-coefficient = <137>;
-			next-level-cache = <&L2_100>;
+			next-level-cache = <&l2_100>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
-			L2_100: l2-cache {
+			l2_100: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU2: cpu@200 {
+		cpu2: cpu@200 {
 			device_type = "cpu";
 			compatible = "qcom,kryo468";
 			reg = <0x0 0x200>;
 			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
-			power-domains = <&CPU_PD2>;
+			power-domains = <&cpu_pd2>;
 			power-domain-names = "psci";
 			capacity-dmips-mhz = <415>;
 			dynamic-power-coefficient = <137>;
-			next-level-cache = <&L2_200>;
+			next-level-cache = <&l2_200>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
-			L2_200: l2-cache {
+			l2_200: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU3: cpu@300 {
+		cpu3: cpu@300 {
 			device_type = "cpu";
 			compatible = "qcom,kryo468";
 			reg = <0x0 0x300>;
 			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
-			power-domains = <&CPU_PD3>;
+			power-domains = <&cpu_pd3>;
 			power-domain-names = "psci";
 			capacity-dmips-mhz = <415>;
 			dynamic-power-coefficient = <137>;
-			next-level-cache = <&L2_300>;
+			next-level-cache = <&l2_300>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
-			L2_300: l2-cache {
+			l2_300: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU4: cpu@400 {
+		cpu4: cpu@400 {
 			device_type = "cpu";
 			compatible = "qcom,kryo468";
 			reg = <0x0 0x400>;
 			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
-			power-domains = <&CPU_PD4>;
+			power-domains = <&cpu_pd4>;
 			power-domain-names = "psci";
 			capacity-dmips-mhz = <415>;
 			dynamic-power-coefficient = <137>;
-			next-level-cache = <&L2_400>;
+			next-level-cache = <&l2_400>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
-			L2_400: l2-cache {
+			l2_400: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU5: cpu@500 {
+		cpu5: cpu@500 {
 			device_type = "cpu";
 			compatible = "qcom,kryo468";
 			reg = <0x0 0x500>;
 			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
-			power-domains = <&CPU_PD5>;
+			power-domains = <&cpu_pd5>;
 			power-domain-names = "psci";
 			capacity-dmips-mhz = <415>;
 			dynamic-power-coefficient = <137>;
-			next-level-cache = <&L2_500>;
+			next-level-cache = <&l2_500>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
-			L2_500: l2-cache {
+			l2_500: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU6: cpu@600 {
+		cpu6: cpu@600 {
 			device_type = "cpu";
 			compatible = "qcom,kryo468";
 			reg = <0x0 0x600>;
 			clocks = <&cpufreq_hw 1>;
 			enable-method = "psci";
-			power-domains = <&CPU_PD6>;
+			power-domains = <&cpu_pd6>;
 			power-domain-names = "psci";
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <480>;
-			next-level-cache = <&L2_600>;
+			next-level-cache = <&l2_600>;
 			operating-points-v2 = <&cpu6_opp_table>;
 			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			qcom,freq-domain = <&cpufreq_hw 1>;
-			L2_600: l2-cache {
+			l2_600: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
-		CPU7: cpu@700 {
+		cpu7: cpu@700 {
 			device_type = "cpu";
 			compatible = "qcom,kryo468";
 			reg = <0x0 0x700>;
 			clocks = <&cpufreq_hw 1>;
 			enable-method = "psci";
-			power-domains = <&CPU_PD7>;
+			power-domains = <&cpu_pd7>;
 			power-domain-names = "psci";
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <480>;
-			next-level-cache = <&L2_700>;
+			next-level-cache = <&l2_700>;
 			operating-points-v2 = <&cpu6_opp_table>;
 			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			qcom,freq-domain = <&cpufreq_hw 1>;
-			L2_700: l2-cache {
+			l2_700: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
-				next-level-cache = <&L3_0>;
+				next-level-cache = <&l3_0>;
 			};
 		};
 
 		cpu-map {
 			cluster0 {
 				core0 {
-					cpu = <&CPU0>;
+					cpu = <&cpu0>;
 				};
 
 				core1 {
-					cpu = <&CPU1>;
+					cpu = <&cpu1>;
 				};
 
 				core2 {
-					cpu = <&CPU2>;
+					cpu = <&cpu2>;
 				};
 
 				core3 {
-					cpu = <&CPU3>;
+					cpu = <&cpu3>;
 				};
 
 				core4 {
-					cpu = <&CPU4>;
+					cpu = <&cpu4>;
 				};
 
 				core5 {
-					cpu = <&CPU5>;
+					cpu = <&cpu5>;
 				};
 
 				core6 {
-					cpu = <&CPU6>;
+					cpu = <&cpu6>;
 				};
 
 				core7 {
-					cpu = <&CPU7>;
+					cpu = <&cpu7>;
 				};
 			};
 		};
@@ -313,7 +313,7 @@
 		idle_states: idle-states {
 			entry-method = "psci";
 
-			LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
+			little_cpu_sleep_0: cpu-sleep-0-0 {
 				compatible = "arm,idle-state";
 				idle-state-name = "little-power-down";
 				arm,psci-suspend-param = <0x40000003>;
@@ -323,7 +323,7 @@
 				local-timer-stop;
 			};
 
-			LITTLE_CPU_SLEEP_1: cpu-sleep-0-1 {
+			little_cpu_sleep_1: cpu-sleep-0-1 {
 				compatible = "arm,idle-state";
 				idle-state-name = "little-rail-power-down";
 				arm,psci-suspend-param = <0x40000004>;
@@ -333,7 +333,7 @@
 				local-timer-stop;
 			};
 
-			BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
+			big_cpu_sleep_0: cpu-sleep-1-0 {
 				compatible = "arm,idle-state";
 				idle-state-name = "big-power-down";
 				arm,psci-suspend-param = <0x40000003>;
@@ -343,7 +343,7 @@
 				local-timer-stop;
 			};
 
-			BIG_CPU_SLEEP_1: cpu-sleep-1-1 {
+			big_cpu_sleep_1: cpu-sleep-1-1 {
 				compatible = "arm,idle-state";
 				idle-state-name = "big-rail-power-down";
 				arm,psci-suspend-param = <0x40000004>;
@@ -355,7 +355,7 @@
 		};
 
 		domain_idle_states: domain-idle-states {
-			CLUSTER_SLEEP_PC: cluster-sleep-0 {
+			cluster_sleep_pc: cluster-sleep-0 {
 				compatible = "domain-idle-state";
 				idle-state-name = "cluster-l3-power-collapse";
 				arm,psci-suspend-param = <0x41000044>;
@@ -364,7 +364,7 @@
 				min-residency-us = <6118>;
 			};
 
-			CLUSTER_SLEEP_CX_RET: cluster-sleep-1 {
+			cluster_sleep_cx_ret: cluster-sleep-1 {
 				compatible = "domain-idle-state";
 				idle-state-name = "cluster-cx-retention";
 				arm,psci-suspend-param = <0x41001244>;
@@ -373,7 +373,7 @@
 				min-residency-us = <8467>;
 			};
 
-			CLUSTER_AOSS_SLEEP: cluster-sleep-2 {
+			cluster_aoss_sleep: cluster-sleep-2 {
 				compatible = "domain-idle-state";
 				idle-state-name = "cluster-power-down";
 				arm,psci-suspend-param = <0x4100b244>;
@@ -583,59 +583,59 @@
 		compatible = "arm,psci-1.0";
 		method = "smc";
 
-		CPU_PD0: cpu0 {
+		cpu_pd0: power-domain-cpu0 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>;
 		};
 
-		CPU_PD1: cpu1 {
+		cpu_pd1: power-domain-cpu1 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>;
 		};
 
-		CPU_PD2: cpu2 {
+		cpu_pd2: power-domain-cpu2 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>;
 		};
 
-		CPU_PD3: cpu3 {
+		cpu_pd3: power-domain-cpu3 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>;
 		};
 
-		CPU_PD4: cpu4 {
+		cpu_pd4: power-domain-cpu4 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>;
 		};
 
-		CPU_PD5: cpu5 {
+		cpu_pd5: power-domain-cpu5 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>;
 		};
 
-		CPU_PD6: cpu6 {
+		cpu_pd6: power-domain-cpu6 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>;
 		};
 
-		CPU_PD7: cpu7 {
+		cpu_pd7: power-domain-cpu7 {
 			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>;
 		};
 
-		CLUSTER_PD: cpu-cluster0 {
+		cluster_pd: power-domain-cluster {
 			#power-domain-cells = <0>;
-			domain-idle-states = <&CLUSTER_SLEEP_PC
-					      &CLUSTER_SLEEP_CX_RET
-					      &CLUSTER_AOSS_SLEEP>;
+			domain-idle-states = <&cluster_sleep_pc
+					      &cluster_sleep_cx_ret
+					      &cluster_aoss_sleep>;
 		};
 	};
 
@@ -2546,7 +2546,7 @@
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x07040000 0 0x1000>;
 
-			cpu = <&CPU0>;
+			cpu = <&cpu0>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
@@ -2566,7 +2566,7 @@
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x07140000 0 0x1000>;
 
-			cpu = <&CPU1>;
+			cpu = <&cpu1>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
@@ -2586,7 +2586,7 @@
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x07240000 0 0x1000>;
 
-			cpu = <&CPU2>;
+			cpu = <&cpu2>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
@@ -2606,7 +2606,7 @@
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x07340000 0 0x1000>;
 
-			cpu = <&CPU3>;
+			cpu = <&cpu3>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
@@ -2626,7 +2626,7 @@
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x07440000 0 0x1000>;
 
-			cpu = <&CPU4>;
+			cpu = <&cpu4>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
@@ -2646,7 +2646,7 @@
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x07540000 0 0x1000>;
 
-			cpu = <&CPU5>;
+			cpu = <&cpu5>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
@@ -2666,7 +2666,7 @@
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x07640000 0 0x1000>;
 
-			cpu = <&CPU6>;
+			cpu = <&cpu6>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
@@ -2686,7 +2686,7 @@
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x07740000 0 0x1000>;
 
-			cpu = <&CPU7>;
+			cpu = <&cpu7>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
@@ -3524,18 +3524,18 @@
 			#interrupt-cells = <4>;
 		};
 
-		sram@146aa000 {
+		sram@14680000 {
 			compatible = "qcom,sc7180-imem", "syscon", "simple-mfd";
-			reg = <0 0x146aa000 0 0x2000>;
+			reg = <0 0x14680000 0 0x2e000>;
 
 			#address-cells = <1>;
 			#size-cells = <1>;
 
-			ranges = <0 0 0x146aa000 0x2000>;
+			ranges = <0 0 0x14680000 0x2e000>;
 
-			pil-reloc@94c {
+			pil-reloc@2a94c {
 				compatible = "qcom,pil-reloc-info";
-				reg = <0x94c 0xc8>;
+				reg = <0x2a94c 0xc8>;
 			};
 		};
 
@@ -3734,7 +3734,7 @@
 					  <SLEEP_TCS   3>,
 					  <WAKE_TCS    3>,
 					  <CONTROL_TCS 1>;
-			power-domains = <&CLUSTER_PD>;
+			power-domains = <&cluster_pd>;
 
 			rpmhcc: clock-controller {
 				compatible = "qcom,sc7180-rpmh-clk";
@@ -4063,21 +4063,21 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu0_alert0>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 				map1 {
 					trip = <&cpu0_alert1>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
@@ -4111,21 +4111,21 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu1_alert0>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 				map1 {
 					trip = <&cpu1_alert1>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
@@ -4159,21 +4159,21 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu2_alert0>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 				map1 {
 					trip = <&cpu2_alert1>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
@@ -4207,21 +4207,21 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu3_alert0>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 				map1 {
 					trip = <&cpu3_alert1>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
@@ -4255,21 +4255,21 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu4_alert0>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 				map1 {
 					trip = <&cpu4_alert1>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
@@ -4303,21 +4303,21 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu5_alert0>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 				map1 {
 					trip = <&cpu5_alert1>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
@@ -4351,13 +4351,13 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu6_alert0>;
-					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 				map1 {
 					trip = <&cpu6_alert1>;
-					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
@@ -4391,13 +4391,13 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu7_alert0>;
-					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 				map1 {
 					trip = <&cpu7_alert1>;
-					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
@@ -4431,13 +4431,13 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu8_alert0>;
-					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 				map1 {
 					trip = <&cpu8_alert1>;
-					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
@@ -4471,13 +4471,13 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu9_alert0>;
-					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 				map1 {
 					trip = <&cpu9_alert1>;
-					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sc7280.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 3d8410683402..8fbc95cf63fe 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -83,7 +83,7 @@
 
 		sleep_clk: sleep-clk {
 			compatible = "fixed-clock";
-			clock-frequency = <32000>;
+			clock-frequency = <32764>;
 			#clock-cells = <0>;
 		};
 	};
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sc8180x.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/sc8180x.dtsi
index 0e9429684dd9..60f71b490261 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sc8180x.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/sc8180x.dtsi
@@ -3889,7 +3889,7 @@
 		};
 
 		cpufreq_hw: cpufreq@18323000 {
-			compatible = "qcom,cpufreq-hw";
+			compatible = "qcom,sc8180x-cpufreq-hw", "qcom,cpufreq-hw";
 			reg = <0 0x18323000 0 0x1400>, <0 0x18325800 0 0x1400>;
 			reg-names = "freq-domain0", "freq-domain1";
 
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
index 0df9695e21e4..6ad58ec82310 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
@@ -1131,9 +1131,6 @@
 		"VA DMIC0", "MIC BIAS1",
 		"VA DMIC1", "MIC BIAS1",
 		"VA DMIC2", "MIC BIAS3",
-		"VA DMIC0", "VA MIC BIAS1",
-		"VA DMIC1", "VA MIC BIAS1",
-		"VA DMIC2", "VA MIC BIAS3",
 		"TX SWR_ADC1", "ADC2_OUTPUT";
 
 	wcd-playback-dai-link {
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sc8280xp.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
index 80a57aa22839..c10ee18cb611 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
@@ -2725,7 +2725,7 @@
 
 		remoteproc_adsp: remoteproc@3000000 {
 			compatible = "qcom,sc8280xp-adsp-pas";
-			reg = <0 0x03000000 0 0x100>;
+			reg = <0 0x03000000 0 0x10000>;
 
 			interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
@@ -3882,26 +3882,26 @@
 				    "vfe3",
 				    "csid3";
 
-			interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 640 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 758 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 759 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 760 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 761 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 762 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 764 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 359 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 360 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 448 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 464 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 465 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 466 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 467 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 468 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 469 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 477 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 478 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 479 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 640 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 641 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 758 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 759 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 760 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 761 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 762 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 764 IRQ_TYPE_EDGE_RISING>;
 			interrupt-names = "csid1_lite",
 					  "vfe_lite1",
 					  "csiphy3",
@@ -5205,7 +5205,7 @@
 
 		remoteproc_nsp0: remoteproc@1b300000 {
 			compatible = "qcom,sc8280xp-nsp0-pas";
-			reg = <0 0x1b300000 0 0x100>;
+			reg = <0 0x1b300000 0 0x10000>;
 
 			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_nsp0_in 0 IRQ_TYPE_EDGE_RISING>,
@@ -5218,8 +5218,12 @@
 			clocks = <&rpmhcc RPMH_CXO_CLK>;
 			clock-names = "xo";
 
-			power-domains = <&rpmhpd SC8280XP_NSP>;
-			power-domain-names = "nsp";
+			power-domains = <&rpmhpd SC8280XP_NSP>,
+					<&rpmhpd SC8280XP_CX>,
+					<&rpmhpd SC8280XP_MXC>;
+			power-domain-names = "nsp",
+					     "cx",
+					     "mxc";
 
 			memory-region = <&pil_nsp0_mem>;
 
@@ -5336,7 +5340,7 @@
 
 		remoteproc_nsp1: remoteproc@21300000 {
 			compatible = "qcom,sc8280xp-nsp1-pas";
-			reg = <0 0x21300000 0 0x100>;
+			reg = <0 0x21300000 0 0x10000>;
 
 			interrupts-extended = <&intc GIC_SPI 887 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_nsp1_in 0 IRQ_TYPE_EDGE_RISING>,
@@ -5349,8 +5353,12 @@
 			clocks = <&rpmhcc RPMH_CXO_CLK>;
 			clock-names = "xo";
 
-			power-domains = <&rpmhpd SC8280XP_NSP>;
-			power-domain-names = "nsp";
+			power-domains = <&rpmhpd SC8280XP_NSP>,
+					<&rpmhpd SC8280XP_CX>,
+					<&rpmhpd SC8280XP_MXC>;
+			power-domain-names = "nsp",
+					     "cx",
+					     "mxc";
 
 			memory-region = <&pil_nsp1_mem>;
 
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts
index 7d34e732f64d..af4213aec86e 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts
@@ -104,7 +104,7 @@
 		compatible = "regulator-fixed";
 		regulator-name = "vreg_l10a_1p8";
 		regulator-min-microvolt = <1804000>;
-		regulator-max-microvolt = <1896000>;
+		regulator-max-microvolt = <1804000>;
 		regulator-always-on;
 		regulator-boot-on;
 	};
@@ -167,6 +167,7 @@
 	 * BAM DMA interconnects support is in place.
 	 */
 	/delete-property/ clocks;
+	/delete-property/ clock-names;
 };
 
 &blsp1_uart2 {
@@ -179,6 +180,7 @@
 	 * BAM DMA interconnects support is in place.
 	 */
 	/delete-property/ clocks;
+	/delete-property/ clock-names;
 };
 
 &blsp2_uart1 {
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sdm630.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/sdm630.dtsi
index c8da5cb8d04e..37692d438d23 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sdm630.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/sdm630.dtsi
@@ -591,8 +591,8 @@
 			};
 
 			gpu_speed_bin: gpu-speed-bin@41a0 {
-				reg = <0x41a2 0x1>;
-				bits = <5 7>;
+				reg = <0x41a2 0x2>;
+				bits = <5 8>;
 			};
 		};
 
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts
index 7167f75bced3..a9926ad6c6f9 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts
@@ -107,6 +107,7 @@
 	status = "okay";
 
 	vdd-supply = <&vreg_l1b_0p925>;
+	vdda-pll-supply = <&vreg_l10a_1p8>;
 	vdda-phy-dpdm-supply = <&vreg_l7b_3p125>;
 };
 
@@ -404,6 +405,8 @@
 &sdhc_2 {
 	status = "okay";
 
+	cd-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
+
 	vmmc-supply = <&vreg_l5b_2p95>;
 	vqmmc-supply = <&vreg_l2b_2p95>;
 };
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sdm845-db845c-navigation-mezzanine.dts linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/sdm845-db845c-navigation-mezzanine.dtso
similarity index 57%
rename from arch/arm64/boot/dts/qcom/sdm845-db845c-navigation-mezzanine.dts
rename to arch/arm64/boot/dts/qcom/sdm845-db845c-navigation-mezzanine.dtso
index a21caa6f3fa2..51f1a4883ab8 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sdm845-db845c-navigation-mezzanine.dts
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/sdm845-db845c-navigation-mezzanine.dtso
@@ -4,8 +4,10 @@
  */
 
 /dts-v1/;
+/plugin/;
 
-#include "sdm845-db845c.dts"
+#include <dt-bindings/clock/qcom,camcc-sdm845.h>
+#include <dt-bindings/gpio/gpio.h>
 
 &camss {
 	vdda-phy-supply = <&vreg_l1a_0p875>;
@@ -28,6 +30,9 @@
 };
 
 &cci_i2c0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
 	camera@10 {
 		compatible = "ovti,ov8856";
 		reg = <0x10>;
@@ -63,42 +68,3 @@
 		};
 	};
 };
-
-&cci_i2c1 {
-	camera@60 {
-		compatible = "ovti,ov7251";
-
-		/* I2C address as per ov7251.txt linux documentation */
-		reg = <0x60>;
-
-		/* CAM3_RST_N */
-		enable-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&cam3_default>;
-
-		clocks = <&clock_camcc CAM_CC_MCLK3_CLK>;
-		clock-names = "xclk";
-		clock-frequency = <24000000>;
-
-		/*
-		 * The &vreg_s4a_1p8 trace always powered on.
-		 *
-		 * The 2.8V vdda-supply regulator is enabled when the
-		 * vreg_s4a_1p8 trace is pulled high.
-		 * It too is represented by a fixed regulator.
-		 *
-		 * No 1.2V vddd-supply regulator is used.
-		 */
-		vdddo-supply = <&vreg_lvs1a_1p8>;
-		vdda-supply = <&cam3_avdd_2v8>;
-
-		status = "disabled";
-
-		port {
-			ov7251_ep: endpoint {
-				data-lanes = <0 1>;
-/*				remote-endpoint = <&csiphy3_ep>; */
-			};
-		};
-	};
-};
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sdm845-db845c.dts linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
index b8a128010dd0..e907ed0cf690 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
@@ -378,6 +378,12 @@
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
+		vreg_l23a_3p3: ldo23 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
 		vreg_l24a_3p075: ldo24 {
 			regulator-min-microvolt = <3088000>;
 			regulator-max-microvolt = <3088000>;
@@ -858,7 +864,6 @@
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&qup_spi0_default>;
-	cs-gpios = <&tlmm 3 GPIO_ACTIVE_LOW>;
 
 	can@0 {
 		compatible = "microchip,mcp2517fd";
@@ -1164,6 +1169,7 @@
 	vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
 	vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
 	vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
+	vdd-3.3-ch1-supply = <&vreg_l23a_3p3>;
 
 	qcom,snoc-host-cap-8bit-quirk;
 	qcom,ath10k-calibration-variant = "Thundercomm_DB845C";
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
index d86a27705bfe..045136e1aacd 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
@@ -156,7 +156,6 @@
 
 		gpio = <&tlmm 88 0>;
 		enable-active-high;
-		regulator-boot-on;
 	};
 };
 
@@ -803,8 +802,8 @@
 		bias-disable;
 	};
 
-	tri_state_key_default: tri-state-key-default-state {
-		pins = "gpio40", "gpio42", "gpio26";
+	alert_slider_default: alert-slider-default-state {
+		pins = "gpio126", "gpio52", "gpio24";
 		function = "gpio";
 		drive-strength = <2>;
 		bias-disable;
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
index d37a433130b9..5948b401165c 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
@@ -135,8 +135,6 @@
 		vdda_sp_sensor:
 		vdda_ufs1_core:
 		vdda_ufs2_core:
-		vdda_usb1_ss_core:
-		vdda_usb2_ss_core:
 		vreg_l1a_0p875: ldo1 {
 			regulator-min-microvolt = <880000>;
 			regulator-max-microvolt = <880000>;
@@ -157,6 +155,7 @@
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
+		vdda_usb1_ss_core:
 		vdd_wcss_cx:
 		vdd_wcss_mx:
 		vdda_wcss_pll:
@@ -383,8 +382,8 @@
 };
 
 &sdhc_2 {
-	pinctrl-names = "default";
 	pinctrl-0 = <&sdc2_clk_state &sdc2_cmd_state &sdc2_data_state &sd_card_det_n_state>;
+	pinctrl-names = "default";
 	cd-gpios = <&tlmm 126 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&vreg_l21a_2p95>;
 	vqmmc-supply = <&vddpx_2>;
@@ -418,16 +417,9 @@
 	status = "okay";
 };
 
-&wifi {
-	vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
-	vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
-	vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
-	vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
-	status = "okay";
-};
-
 &tlmm {
-	gpio-reserved-ranges = <0 4>, <27 4>, <81 4>, <85 4>;
+	gpio-reserved-ranges = <27 4>, /* SPI (eSE - embedded Secure Element) */
+			       <85 4>; /* SPI (fingerprint reader) */
 
 	sdc2_clk_state: sdc2-clk-state {
 		pins = "sdc2_clk";
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sdm845.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 54077549b9da..54956ae1f674 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -4326,16 +4326,16 @@
 				"vfe1",
 				"vfe_lite";
 
-			interrupts = <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
-				<GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
-				<GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
-				<GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>,
-				<GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>,
-				<GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>,
-				<GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>,
-				<GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
-				<GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
-				<GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 464 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 466 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 468 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 477 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 478 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 479 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 448 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 465 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 467 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 469 IRQ_TYPE_EDGE_RISING>;
 			interrupt-names = "csid0",
 				"csid1",
 				"csid2",
@@ -5074,18 +5074,18 @@
 			#interrupt-cells = <4>;
 		};
 
-		sram@146bf000 {
+		sram@14680000 {
 			compatible = "qcom,sdm845-imem", "syscon", "simple-mfd";
-			reg = <0 0x146bf000 0 0x1000>;
+			reg = <0 0x14680000 0 0x40000>;
 
 			#address-cells = <1>;
 			#size-cells = <1>;
 
-			ranges = <0 0 0x146bf000 0x1000>;
+			ranges = <0 0 0x14680000 0x40000>;
 
-			pil-reloc@94c {
+			pil-reloc@3f94c {
 				compatible = "qcom,pil-reloc-info";
-				reg = <0x94c 0xc8>;
+				reg = <0x3f94c 0xc8>;
 			};
 		};
 
@@ -5365,11 +5365,11 @@
 			compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
 			qcom,controlled-remotely;
 			reg = <0 0x17184000 0 0x2a000>;
-			num-channels = <31>;
+			num-channels = <23>;
 			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
 			#dma-cells = <1>;
 			qcom,ee = <1>;
-			qcom,num-ees = <2>;
+			qcom,num-ees = <4>;
 			iommus = <&apps_smmu 0x1806 0x0>;
 		};
 
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sdx75.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/sdx75.dtsi
index 7cf3fcb469a8..60a5d6d3ca7c 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sdx75.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/sdx75.dtsi
@@ -34,7 +34,7 @@
 
 		sleep_clk: sleep-clk {
 			compatible = "fixed-clock";
-			clock-frequency = <32000>;
+			clock-frequency = <32764>;
 			#clock-cells = <0>;
 		};
 	};
@@ -893,7 +893,7 @@
 
 		remoteproc_mpss: remoteproc@4080000 {
 			compatible = "qcom,sdx75-mpss-pas";
-			reg = <0 0x04080000 0 0x4040>;
+			reg = <0 0x04080000 0 0x10000>;
 
 			interrupts-extended = <&intc GIC_SPI 250 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>,
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sm4450.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/sm4450.dtsi
index 1e05cd00b635..0bbacab6842c 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sm4450.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/sm4450.dtsi
@@ -29,7 +29,7 @@
 
 		sleep_clk: sleep-clk {
 			compatible = "fixed-clock";
-			clock-frequency = <32000>;
+			clock-frequency = <32764>;
 			#clock-cells = <0>;
 		};
 
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sm6115.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/sm6115.dtsi
index 41216cc319d6..e33da2975240 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sm6115.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/sm6115.dtsi
@@ -1688,8 +1688,12 @@
 
 		gpu: gpu@5900000 {
 			compatible = "qcom,adreno-610.0", "qcom,adreno";
-			reg = <0x0 0x05900000 0x0 0x40000>;
-			reg-names = "kgsl_3d0_reg_memory";
+			reg = <0x0 0x05900000 0x0 0x40000>,
+			      <0x0 0x0599e000 0x0 0x1000>,
+			      <0x0 0x05961000 0x0 0x800>;
+			reg-names = "kgsl_3d0_reg_memory",
+				    "cx_mem",
+				    "cx_dbgc";
 
 			/* There's no (real) GMU, so we have to handle quite a bunch of clocks! */
 			clocks = <&gpucc GPU_CC_GX_GFX3D_CLK>,
@@ -2027,7 +2031,7 @@
 
 		remoteproc_mpss: remoteproc@6080000 {
 			compatible = "qcom,sm6115-mpss-pas";
-			reg = <0x0 0x06080000 0x0 0x100>;
+			reg = <0x0 0x06080000 0x0 0x10000>;
 
 			interrupts-extended = <&intc GIC_SPI 307 IRQ_TYPE_EDGE_RISING>,
 					      <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
@@ -2670,9 +2674,9 @@
 			};
 		};
 
-		remoteproc_adsp: remoteproc@ab00000 {
+		remoteproc_adsp: remoteproc@a400000 {
 			compatible = "qcom,sm6115-adsp-pas";
-			reg = <0x0 0x0ab00000 0x0 0x100>;
+			reg = <0x0 0x0a400000 0x0 0x4040>;
 
 			interrupts-extended = <&intc GIC_SPI 282 IRQ_TYPE_EDGE_RISING>,
 					      <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
@@ -2744,7 +2748,7 @@
 
 		remoteproc_cdsp: remoteproc@b300000 {
 			compatible = "qcom,sm6115-cdsp-pas";
-			reg = <0x0 0x0b300000 0x0 0x100000>;
+			reg = <0x0 0x0b300000 0x0 0x4040>;
 
 			interrupts-extended = <&intc GIC_SPI 265 IRQ_TYPE_EDGE_RISING>,
 					      <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sm6125.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/sm6125.dtsi
index 133610d14fc4..1f7fd429ad42 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sm6125.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/sm6125.dtsi
@@ -28,7 +28,7 @@
 		sleep_clk: sleep-clk {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
-			clock-frequency = <32000>;
+			clock-frequency = <32764>;
 			clock-output-names = "sleep_clk";
 		};
 	};
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sm6350.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/sm6350.dtsi
index 7986ddb30f6e..10418fccfea2 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sm6350.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/sm6350.dtsi
@@ -936,7 +936,7 @@
 				power-domains = <&rpmhpd SM6350_CX>;
 				operating-points-v2 = <&qup_opp_table>;
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
-						<&aggre1_noc MASTER_QUP_0 0 &clk_virt SLAVE_EBI_CH0 0>;
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>;
 				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
@@ -1283,7 +1283,7 @@
 
 		adsp: remoteproc@3000000 {
 			compatible = "qcom,sm6350-adsp-pas";
-			reg = <0 0x03000000 0 0x100>;
+			reg = <0x0 0x03000000 0x0 0x10000>;
 
 			interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
@@ -1376,43 +1376,43 @@
 				opp-850000000 {
 					opp-hz = /bits/ 64 <850000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
-					opp-supported-hw = <0x02>;
+					opp-supported-hw = <0x03>;
 				};
 
 				opp-800000000 {
 					opp-hz = /bits/ 64 <800000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
-					opp-supported-hw = <0x04>;
+					opp-supported-hw = <0x07>;
 				};
 
 				opp-650000000 {
 					opp-hz = /bits/ 64 <650000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
-					opp-supported-hw = <0x08>;
+					opp-supported-hw = <0x0f>;
 				};
 
 				opp-565000000 {
 					opp-hz = /bits/ 64 <565000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
-					opp-supported-hw = <0x10>;
+					opp-supported-hw = <0x1f>;
 				};
 
 				opp-430000000 {
 					opp-hz = /bits/ 64 <430000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
-					opp-supported-hw = <0xff>;
+					opp-supported-hw = <0x1f>;
 				};
 
 				opp-355000000 {
 					opp-hz = /bits/ 64 <355000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
-					opp-supported-hw = <0xff>;
+					opp-supported-hw = <0x1f>;
 				};
 
 				opp-253000000 {
 					opp-hz = /bits/ 64 <253000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
-					opp-supported-hw = <0xff>;
+					opp-supported-hw = <0x1f>;
 				};
 			};
 		};
@@ -1503,7 +1503,7 @@
 
 		mpss: remoteproc@4080000 {
 			compatible = "qcom,sm6350-mpss-pas";
-			reg = <0x0 0x04080000 0x0 0x4040>;
+			reg = <0x0 0x04080000 0x0 0x10000>;
 
 			interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_EDGE_RISING>,
 					      <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sm6375.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/sm6375.dtsi
index 4d519dd6e7ef..01371f41f790 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sm6375.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/sm6375.dtsi
@@ -29,7 +29,7 @@
 
 		sleep_clk: sleep-clk {
 			compatible = "fixed-clock";
-			clock-frequency = <32000>;
+			clock-frequency = <32764>;
 			#clock-cells = <0>;
 		};
 	};
@@ -1516,9 +1516,9 @@
 			#power-domain-cells = <1>;
 		};
 
-		remoteproc_mss: remoteproc@6000000 {
+		remoteproc_mss: remoteproc@6080000 {
 			compatible = "qcom,sm6375-mpss-pas";
-			reg = <0 0x06000000 0 0x4040>;
+			reg = <0x0 0x06080000 0x0 0x10000>;
 
 			interrupts-extended = <&intc GIC_SPI 307 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>,
@@ -1559,7 +1559,7 @@
 
 		remoteproc_adsp: remoteproc@a400000 {
 			compatible = "qcom,sm6375-adsp-pas";
-			reg = <0 0x0a400000 0 0x100>;
+			reg = <0 0x0a400000 0 0x10000>;
 
 			interrupts-extended = <&intc GIC_SPI 282 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
@@ -1595,9 +1595,9 @@
 			};
 		};
 
-		remoteproc_cdsp: remoteproc@b000000 {
+		remoteproc_cdsp: remoteproc@b300000 {
 			compatible = "qcom,sm6375-cdsp-pas";
-			reg = <0x0 0x0b000000 0x0 0x100000>;
+			reg = <0x0 0x0b300000 0x0 0x10000>;
 
 			interrupts-extended = <&intc GIC_SPI 265 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sm7125.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/sm7125.dtsi
index 12dd72859a43..a53145a610a3 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sm7125.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/sm7125.dtsi
@@ -6,11 +6,11 @@
 #include "sc7180.dtsi"
 
 /* SM7125 uses Kryo 465 instead of Kryo 468 */
-&CPU0 { compatible = "qcom,kryo465"; };
-&CPU1 { compatible = "qcom,kryo465"; };
-&CPU2 { compatible = "qcom,kryo465"; };
-&CPU3 { compatible = "qcom,kryo465"; };
-&CPU4 { compatible = "qcom,kryo465"; };
-&CPU5 { compatible = "qcom,kryo465"; };
-&CPU6 { compatible = "qcom,kryo465"; };
-&CPU7 { compatible = "qcom,kryo465"; };
+&cpu0 { compatible = "qcom,kryo465"; };
+&cpu1 { compatible = "qcom,kryo465"; };
+&cpu2 { compatible = "qcom,kryo465"; };
+&cpu3 { compatible = "qcom,kryo465"; };
+&cpu4 { compatible = "qcom,kryo465"; };
+&cpu5 { compatible = "qcom,kryo465"; };
+&cpu6 { compatible = "qcom,kryo465"; };
+&cpu7 { compatible = "qcom,kryo465"; };
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
index f59ab670061d..97e2c25b8fa3 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
@@ -32,7 +32,7 @@
 	chassis-type = "handset";
 
 	/* required for bootloader to select correct board */
-	qcom,msm-id = <434 0x10000>, <459 0x10000>;
+	qcom,msm-id = <459 0x10000>;
 	qcom,board-id = <8 32>;
 
 	aliases {
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts
index b53080ed65f8..d7295fdf58ee 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts
@@ -376,8 +376,8 @@
 		pinctrl-0 = <&da7280_intr_default>;
 
 		dlg,actuator-type = "LRA";
-		dlg,dlg,const-op-mode = <1>;
-		dlg,dlg,periodic-op-mode = <1>;
+		dlg,const-op-mode = <1>;
+		dlg,periodic-op-mode = <1>;
 		dlg,nom-microvolt = <2000000>;
 		dlg,abs-max-microvolt = <2000000>;
 		dlg,imax-microamp = <129000>;
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sm8250.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/sm8250.dtsi
index 630f4eff20bf..e17937f76806 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -84,7 +84,7 @@
 
 		sleep_clk: sleep-clk {
 			compatible = "fixed-clock";
-			clock-frequency = <32768>;
+			clock-frequency = <32764>;
 			#clock-cells = <0>;
 		};
 	};
@@ -606,7 +606,7 @@
 		};
 
 		cpu7_opp9: opp-1747200000 {
-			opp-hz = /bits/ 64 <1708800000>;
+			opp-hz = /bits/ 64 <1747200000>;
 			opp-peak-kBps = <5412000 42393600>;
 		};
 
@@ -4481,20 +4481,20 @@
 				    "vfe_lite0",
 				    "vfe_lite1";
 
-			interrupts = <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 477 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 478 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 479 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 448 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 86 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 89 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 464 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 466 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 468 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 359 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 465 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 467 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 469 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 360 IRQ_TYPE_EDGE_RISING>;
 			interrupt-names = "csiphy0",
 					  "csiphy1",
 					  "csiphy2",
diff --git linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sm8350.dtsi linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/sm8350.dtsi
index 37a2aba0d4ca..0be8f2befec7 100644
--- linux-libre-6.12-gnu/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ linux-libre-6.12.79-gnu/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -42,7 +42,7 @@
 
 		sleep_clk: sleep-clk {
 			compatible = "fixed-clock";
-			clock-frequency = <32000>;
+			clock-frequency = <32764>;
 			#clock-cells = <0>;
 		};
 	};
@@ -455,7 +455,7 @@
 			no-map;
 		};
 
-		pil_camera_mem: mmeory@85200000 {
+		pil_camera_mem: memory@85200000 {
 			reg = <0x0 0x85200000 0x0 0x500000>;
 			no-map;
 		};
@@ -1806,11 +1806,11 @@
 			interrupts = <GIC_SPI 272