diff --git linux-libre-6.18-gnu/Documentation/ABI/obsolete/sysfs-selinux-user linux-libre-6.18.44-gnu/Documentation/ABI/removed/sysfs-selinux-user
similarity index 100%
rename from Documentation/ABI/obsolete/sysfs-selinux-user
rename to Documentation/ABI/removed/sysfs-selinux-user
diff --git linux-libre-6.18-gnu/Documentation/ABI/testing/sysfs-bus-i3c linux-libre-6.18.44-gnu/Documentation/ABI/testing/sysfs-bus-i3c
index c812ab180ff40..c1e048957a010 100644
--- linux-libre-6.18-gnu/Documentation/ABI/testing/sysfs-bus-i3c
+++ linux-libre-6.18.44-gnu/Documentation/ABI/testing/sysfs-bus-i3c
@@ -161,3 +161,14 @@ Contact:	linux-i3c@vger.kernel.org
 Description:
 		These directories are just symbolic links to
 		/sys/bus/i3c/devices/i3c-<bus-id>/<bus-id>-<device-pid>.
+
+What:		/sys/bus/i3c/devices/i3c-<bus-id>/<bus-id>-<device-pid>/dev_nack_retry_count
+KernelVersion:  6.18
+Contact:	linux-i3c@vger.kernel.org
+Description:
+		Expose the dev_nak_retry_count which controls the number of
+		automatic retries that will be performed by the controller when
+		the target device returns a NACK response. A value of 0 disables
+		the automatic retries. Exist only when I3C constroller supports
+		this retry on nack feature.
+
diff --git linux-libre-6.18-gnu/Documentation/ABI/testing/sysfs-fs-erofs linux-libre-6.18.44-gnu/Documentation/ABI/testing/sysfs-fs-erofs
index 76d9808ed5814..b9243c7f28d71 100644
--- linux-libre-6.18-gnu/Documentation/ABI/testing/sysfs-fs-erofs
+++ linux-libre-6.18.44-gnu/Documentation/ABI/testing/sysfs-fs-erofs
@@ -10,12 +10,16 @@ Description:	Shows all enabled kernel features.
 What:		/sys/fs/erofs/<disk>/sync_decompress
 Date:		November 2021
 Contact:	"Huang Jianan" <huangjianan@oppo.com>
-Description:	Control strategy of sync decompression:
+Description:	Control strategy of synchronous decompression. Synchronous
+		decompression tries to decompress in the reader thread for
+		synchronous reads and small asynchronous reads (<= 12 KiB):
 
-		- 0 (default, auto): enable for readpage, and enable for
-		  readahead on atomic contexts only.
-		- 1 (force on): enable for readpage and readahead.
-		- 2 (force off): disable for all situations.
+		- 0 (auto, default): apply to synchronous reads only, but will
+		                     switch to 1 (force on) if any decompression
+		                     request is detected in atomic contexts;
+		- 1 (force on): apply to synchronous reads and small
+		                asynchronous reads;
+		- 2 (force off): disable synchronous decompression completely.
 
 What:		/sys/fs/erofs/<disk>/drop_caches
 Date:		November 2024
diff --git linux-libre-6.18-gnu/Documentation/PCI/endpoint/pci-vntb-howto.rst linux-libre-6.18.44-gnu/Documentation/PCI/endpoint/pci-vntb-howto.rst
index 9a7a2f0a68498..3679f5c302549 100644
--- linux-libre-6.18-gnu/Documentation/PCI/endpoint/pci-vntb-howto.rst
+++ linux-libre-6.18.44-gnu/Documentation/PCI/endpoint/pci-vntb-howto.rst
@@ -52,14 +52,14 @@ pci-epf-vntb device, the following commands can be used::
 	# cd /sys/kernel/config/pci_ep/
 	# mkdir functions/pci_epf_vntb/func1
 
-The "mkdir func1" above creates the pci-epf-ntb function device that will
+The "mkdir func1" above creates the pci-epf-vntb function device that will
 be probed by pci_epf_vntb driver.
 
 The PCI endpoint framework populates the directory with the following
 configurable fields::
 
-	# ls functions/pci_epf_ntb/func1
-	baseclass_code    deviceid          msi_interrupts    pci-epf-ntb.0
+	# ls functions/pci_epf_vntb/func1
+	baseclass_code    deviceid          msi_interrupts    pci-epf-vntb.0
 	progif_code       secondary         subsys_id         vendorid
 	cache_line_size   interrupt_pin     msix_interrupts   primary
 	revid             subclass_code     subsys_vendor_id
@@ -111,13 +111,13 @@ A sample configuration for virtual NTB driver for virtual PCI bus::
 	# echo 0x080A > functions/pci_epf_vntb/func1/pci_epf_vntb.0/vntb_pid
 	# echo 0x10 > functions/pci_epf_vntb/func1/pci_epf_vntb.0/vbus_number
 
-Binding pci-epf-ntb Device to EP Controller
+Binding pci-epf-vntb Device to EP Controller
 --------------------------------------------
 
 NTB function device should be attached to PCI endpoint controllers
 connected to the host.
 
-	# ln -s controllers/5f010000.pcie_ep functions/pci-epf-ntb/func1/primary
+	# ln -s controllers/5f010000.pcie_ep functions/pci_epf_vntb/func1/primary
 
 Once the above step is completed, the PCI endpoint controllers are ready to
 establish a link with the host.
@@ -139,7 +139,7 @@ lspci Output at Host side
 -------------------------
 
 Note that the devices listed here correspond to the values populated in
-"Creating pci-epf-ntb Device" section above::
+"Creating pci-epf-vntb Device" section above::
 
 	# lspci
         00:00.0 PCI bridge: Freescale Semiconductor Inc Device 0000 (rev 01)
@@ -152,7 +152,7 @@ lspci Output at EP Side / Virtual PCI bus
 -----------------------------------------
 
 Note that the devices listed here correspond to the values populated in
-"Creating pci-epf-ntb Device" section above::
+"Creating pci-epf-vntb Device" section above::
 
         # lspci
         10:00.0 Unassigned class [ffff]: Dawicontrol Computersysteme GmbH Device 1234 (rev ff)
diff --git linux-libre-6.18-gnu/Documentation/admin-guide/LSM/Smack.rst linux-libre-6.18.44-gnu/Documentation/admin-guide/LSM/Smack.rst
index 6d44f4fdbf59f..c5ed775f2d107 100644
--- linux-libre-6.18-gnu/Documentation/admin-guide/LSM/Smack.rst
+++ linux-libre-6.18.44-gnu/Documentation/admin-guide/LSM/Smack.rst
@@ -601,10 +601,15 @@ specification.
 Task Attribute
 ~~~~~~~~~~~~~~
 
-The Smack label of a process can be read from /proc/<pid>/attr/current. A
-process can read its own Smack label from /proc/self/attr/current. A
+The Smack label of a process can be read from ``/proc/<pid>/attr/current``. A
+process can read its own Smack label from ``/proc/self/attr/current``. A
 privileged process can change its own Smack label by writing to
-/proc/self/attr/current but not the label of another process.
+``/proc/self/attr/current`` but not the label of another process.
+
+Format of writing is : only the label or the label followed by one of the
+3 trailers: ``\n`` (by common agreement for ``/proc/...`` interfaces),
+``\0`` (because some applications incorrectly include it),
+``\n\0`` (because we think some applications may incorrectly include it).
 
 File Attribute
 ~~~~~~~~~~~~~~
@@ -696,6 +701,11 @@ sockets.
 	A privileged program may set this to match the label of another
 	task with which it hopes to communicate.
 
+UNIX domain socket (UDS) with a BSD address functions both as a file in a
+filesystem and as a socket. As a file, it carries the SMACK64 attribute. This
+attribute is not involved in Smack security enforcement and is immutably
+assigned the label "*".
+
 Smack Netlabel Exceptions
 ~~~~~~~~~~~~~~~~~~~~~~~~~
 
diff --git linux-libre-6.18-gnu/Documentation/admin-guide/cgroup-v2.rst linux-libre-6.18.44-gnu/Documentation/admin-guide/cgroup-v2.rst
index 0e6c67ac585a0..edcd125d6992f 100644
--- linux-libre-6.18-gnu/Documentation/admin-guide/cgroup-v2.rst
+++ linux-libre-6.18.44-gnu/Documentation/admin-guide/cgroup-v2.rst
@@ -2538,10 +2538,10 @@ Cpuset Interface Files
 	Users can manually set it to a value that is different from
 	"cpuset.cpus".	One constraint in setting it is that the list of
 	CPUs must be exclusive with respect to "cpuset.cpus.exclusive"
-	of its sibling.  If "cpuset.cpus.exclusive" of a sibling cgroup
-	isn't set, its "cpuset.cpus" value, if set, cannot be a subset
-	of it to leave at least one CPU available when the exclusive
-	CPUs are taken away.
+	and "cpuset.cpus.exclusive.effective" of its siblings.	Another
+	constraint is that it cannot be a superset of "cpuset.cpus"
+	of its sibling in order to leave at least one CPU available to
+	that sibling when the exclusive CPUs are taken away.
 
 	For a parent cgroup, any one of its exclusive CPUs can only
 	be distributed to at most one of its child cgroups.  Having an
diff --git linux-libre-6.18-gnu/Documentation/admin-guide/kernel-parameters.txt linux-libre-6.18.44-gnu/Documentation/admin-guide/kernel-parameters.txt
index 6c42061ca20e5..ab4e03f91e744 100644
--- linux-libre-6.18-gnu/Documentation/admin-guide/kernel-parameters.txt
+++ linux-libre-6.18.44-gnu/Documentation/admin-guide/kernel-parameters.txt
@@ -7925,6 +7925,9 @@
 				p = USB_QUIRK_SHORT_SET_ADDRESS_REQ_TIMEOUT
 					(Reduce timeout of the SET_ADDRESS
 					request from 5000 ms to 500 ms);
+				q = USB_QUIRK_FORCE_ONE_CONFIG (Device
+					claims zero configurations,
+					forcing to 1);
 			Example: quirks=0781:5580:bk,0a5c:5834:gij
 
 	usbhid.mousepoll=
diff --git linux-libre-6.18-gnu/Documentation/admin-guide/mm/damon/reclaim.rst linux-libre-6.18.44-gnu/Documentation/admin-guide/mm/damon/reclaim.rst
index af05ae6170184..26aa86a654de6 100644
--- linux-libre-6.18-gnu/Documentation/admin-guide/mm/damon/reclaim.rst
+++ linux-libre-6.18.44-gnu/Documentation/admin-guide/mm/damon/reclaim.rst
@@ -71,6 +71,10 @@ of parametrs except ``enabled`` again.  Once the re-reading is done, this
 parameter is set as ``N``.  If invalid parameters are found while the
 re-reading, DAMON_RECLAIM will be disabled.
 
+Once ``Y`` is written to this parameter, the user must not write to any
+parameters until reading ``commit_inputs`` again returns ``N``.  If users
+violate this rule, the kernel may exhibit undefined behavior.
+
 min_age
 -------
 
diff --git linux-libre-6.18-gnu/Documentation/admin-guide/pm/cpufreq.rst linux-libre-6.18.44-gnu/Documentation/admin-guide/pm/cpufreq.rst
index 738d7b4dc33af..9909c7d5c6172 100644
--- linux-libre-6.18-gnu/Documentation/admin-guide/pm/cpufreq.rst
+++ linux-libre-6.18.44-gnu/Documentation/admin-guide/pm/cpufreq.rst
@@ -516,7 +516,7 @@ This governor exposes the following tunables:
 	of those tasks above 0 and set this attribute to 1.
 
 ``sampling_down_factor``
-	Temporary multiplier, between 1 (default) and 100 inclusive, to apply to
+	Temporary multiplier, between 1 (default) and 100000 inclusive, to apply to
 	the ``sampling_rate`` value if the CPU load goes above ``up_threshold``.
 
 	This causes the next execution of the governor's worker routine (after
@@ -586,8 +586,8 @@ This governor exposes the following tunables:
 	100 (5 by default).
 
 	This is how much the frequency is allowed to change in one go.  Setting
-	it to 0 will cause the default frequency step (5 percent) to be used
-	and setting it to 100 effectively causes the governor to periodically
+	it to 0 disables frequency changes by the governor entirely and setting
+	it to 100 effectively causes the governor to periodically
 	switch the frequency between the ``scaling_min_freq`` and
 	``scaling_max_freq`` policy limits.
 
diff --git linux-libre-6.18-gnu/Documentation/admin-guide/pm/intel_pstate.rst linux-libre-6.18.44-gnu/Documentation/admin-guide/pm/intel_pstate.rst
index 26e702c7016e5..66287f8d645f0 100644
--- linux-libre-6.18-gnu/Documentation/admin-guide/pm/intel_pstate.rst
+++ linux-libre-6.18.44-gnu/Documentation/admin-guide/pm/intel_pstate.rst
@@ -348,11 +348,12 @@ HyperThreading (HT) in the context of Intel processors, is enabled on at least
 one core, ``intel_pstate`` assigns performance-based priorities to CPUs.  Namely,
 the priority of a given CPU reflects its highest HWP performance level which
 causes the CPU scheduler to generally prefer more performant CPUs, so the less
-performant CPUs are used when the other ones are fully loaded.  However, SMT
-siblings (that is, logical CPUs sharing one physical core) are treated in a
-special way such that if one of them is in use, the effective priority of the
-other ones is lowered below the priorities of the CPUs located in the other
-physical cores.
+performant CPUs are used when the other ones are fully loaded.  SMT siblings
+(that is, logical CPUs sharing one physical core) are given the same priority.
+The scheduler can pull tasks from lower-priority cores and place them on any
+sibling.  Since the scheduler spreads tasks among physical cores, tasks will be
+placed on the SMT siblings of physical cores only after all physical cores are
+busy.
 
 This approach maximizes performance in the majority of cases, but unfortunately
 it also leads to excessive energy usage in some important scenarios, like video
diff --git linux-libre-6.18-gnu/Documentation/arch/arm64/cpu-hotplug.rst linux-libre-6.18.44-gnu/Documentation/arch/arm64/cpu-hotplug.rst
index 8fb438bf77816..7c3379b704aaf 100644
--- linux-libre-6.18-gnu/Documentation/arch/arm64/cpu-hotplug.rst
+++ linux-libre-6.18.44-gnu/Documentation/arch/arm64/cpu-hotplug.rst
@@ -47,11 +47,12 @@ ever have can be described at boot. There are no power-domain considerations
 as such devices are emulated.
 
 CPU Hotplug on virtual systems is supported. It is distinct from physical
-CPU Hotplug as all resources are described as ``present``, but CPUs may be
-marked as disabled by firmware. Only the CPU's online/offline behaviour is
-influenced by firmware. An example is where a virtual machine boots with a
-single CPU, and additional CPUs are added once a cloud orchestrator deploys
-the workload.
+CPU Hotplug as all vCPU resources are statically described in the firmware
+configuration tables (e.g. MADT), meaning their maximum possible count is
+known at boot. However, vCPUs that are not enabled at boot are not marked
+as ``present`` by the kernel until they are hotplugged. An example is where
+a virtual machine boots with a single CPU, and additional CPUs are added
+once a cloud orchestrator deploys the workload.
 
 For a virtual machine, the VMM (e.g. Qemu) plays the part of firmware.
 
@@ -60,16 +61,19 @@ brought online. Firmware can enforce its policy via PSCI's return codes. e.g.
 ``DENIED``.
 
 The ACPI tables must describe all the resources of the virtual machine. CPUs
-that firmware wishes to disable either from boot (or later) should not be
-``enabled`` in the MADT GICC structures, but should have the ``online capable``
-bit set, to indicate they can be enabled later. The boot CPU must be marked as
-``enabled``.  The 'always on' GICR structure must be used to describe the
-redistributors.
+that are hot-pluggable must have the ``online capable`` bit set and the
+``enabled`` bit cleared in the MADT GICC structures to indicate they can be
+enabled later. The boot CPU must be marked as ``enabled`` with its
+``online capable`` bit cleared. The 'always on' GICR structure must be used
+to describe the redistributors.
 
 CPUs described as ``online capable`` but not ``enabled`` can be set to enabled
 by the DSDT's Processor object's _STA method. On virtual systems the _STA method
-must always report the CPU as ``present``. Changes to the firmware policy can
-be notified to the OS via device-check or eject-request.
+must always set the ``ACPI_STA_DEVICE_PRESENT`` bit, while toggling the
+``ACPI_STA_DEVICE_ENABLED`` bit to reflect its plug status. The kernel will
+then dynamically mark the vCPU as ``present`` within the OS when the
+``ACPI_STA_DEVICE_ENABLED`` bit becomes set during hot-add. Changes to the
+firmware policy can be notified to the OS via device-check or eject-request.
 
 CPUs described as ``enabled`` in the static table, should not have their _STA
 modified dynamically by firmware. Soft-restart features such as kexec will
diff --git linux-libre-6.18-gnu/Documentation/arch/arm64/silicon-errata.rst linux-libre-6.18.44-gnu/Documentation/arch/arm64/silicon-errata.rst
index a7ec57060f64f..1c5accd6dec49 100644
--- linux-libre-6.18-gnu/Documentation/arch/arm64/silicon-errata.rst
+++ linux-libre-6.18.44-gnu/Documentation/arch/arm64/silicon-errata.rst
@@ -128,16 +128,28 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A76      | #3324349        | ARM64_ERRATUM_3194386       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A76      | #4193800        | ARM64_ERRATUM_4118414       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A76AE    | #4193801        | ARM64_ERRATUM_4118414       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A77      | #1491015        | N/A                         |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A77      | #1508412        | ARM64_ERRATUM_1508412       |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A77      | #3324348        | ARM64_ERRATUM_3194386       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A77      | #4193798        | ARM64_ERRATUM_4118414       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A78      | #3324344        | ARM64_ERRATUM_3194386       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A78      | #4193791        | ARM64_ERRATUM_4118414       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A78AE    | #4193793        | ARM64_ERRATUM_4118414       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A78C     | #3324346,3324347| ARM64_ERRATUM_3194386       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A78C     | #4193794        | ARM64_ERRATUM_4118414       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A710     | #2119858        | ARM64_ERRATUM_2119858       |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A710     | #2054223        | ARM64_ERRATUM_2054223       |
@@ -146,6 +158,8 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A710     | #3324338        | ARM64_ERRATUM_3194386       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A710     | #4193788        | ARM64_ERRATUM_4118414       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A715     | #2645198        | ARM64_ERRATUM_2645198       |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A715     | #3456084        | ARM64_ERRATUM_3194386       |
@@ -158,20 +172,32 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-X1       | #3324344        | ARM64_ERRATUM_3194386       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-X1       | #4193791        | ARM64_ERRATUM_4118414       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-X1C      | #3324346        | ARM64_ERRATUM_3194386       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-X1C      | #4193792        | ARM64_ERRATUM_4118414       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-X2       | #2119858        | ARM64_ERRATUM_2119858       |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-X2       | #2224489        | ARM64_ERRATUM_2224489       |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-X2       | #3324338        | ARM64_ERRATUM_3194386       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-X2       | #4193788        | ARM64_ERRATUM_4118414       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-X3       | #3324335        | ARM64_ERRATUM_3194386       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-X3       | #4193786        | ARM64_ERRATUM_4118414       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-X4       | #3194386        | ARM64_ERRATUM_3194386       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-X4       | #4118414        | ARM64_ERRATUM_4118414       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-X925     | #3324334        | ARM64_ERRATUM_3194386       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-X925     | #4193781        | ARM64_ERRATUM_4118414       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Neoverse-N1     | #1188873,1418040| ARM64_ERRATUM_1418040       |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Neoverse-N1     | #1349291        | N/A                         |
@@ -182,6 +208,8 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Neoverse-N1     | #3324349        | ARM64_ERRATUM_3194386       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Neoverse-N1     | #4193800        | ARM64_ERRATUM_4118414       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Neoverse-N2     | #2139208        | ARM64_ERRATUM_2139208       |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Neoverse-N2     | #2067961        | ARM64_ERRATUM_2067961       |
@@ -190,18 +218,34 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Neoverse-N2     | #3324339        | ARM64_ERRATUM_3194386       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Neoverse-N2     | #4193789        | ARM64_ERRATUM_4118414       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Neoverse-N3     | #3456111        | ARM64_ERRATUM_3194386       |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Neoverse-V1     | #1619801        | N/A                         |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Neoverse-V1     | #3324341        | ARM64_ERRATUM_3194386       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Neoverse-V1     | #4193790        | ARM64_ERRATUM_4118414       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Neoverse-V2     | #3324336        | ARM64_ERRATUM_3194386       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Neoverse-V2     | #4193787        | ARM64_ERRATUM_4118414       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Neoverse-V3     | #3312417        | ARM64_ERRATUM_3194386       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Neoverse-V3     | #4193784        | ARM64_ERRATUM_4118414       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Neoverse-V3AE   | #3312417        | ARM64_ERRATUM_3194386       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Neoverse-V3AE   | #4193784        | ARM64_ERRATUM_4118414       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | C1-Premium      | #4193780        | ARM64_ERRATUM_4118414       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | C1-Pro          | #4193714        | ARM64_ERRATUM_4193714       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | C1-Ultra        | #4193780        | ARM64_ERRATUM_4118414       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | MMU-500         | #841119,826419  | ARM_SMMU_MMU_500_CPRE_ERRATA|
 |                |                 | #562869,1047329 |                             |
 +----------------+-----------------+-----------------+-----------------------------+
@@ -244,6 +288,8 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | NVIDIA         | Carmel Core     | N/A             | NVIDIA_CARMEL_CNP_ERRATUM   |
 +----------------+-----------------+-----------------+-----------------------------+
+| NVIDIA         | Olympus core    | T410-OLY-1029   | ARM64_ERRATUM_4118414       |
++----------------+-----------------+-----------------+-----------------------------+
 | NVIDIA         | T241 GICv3/4.x  | T241-FABRIC-4   | N/A                         |
 +----------------+-----------------+-----------------+-----------------------------+
 +----------------+-----------------+-----------------+-----------------------------+
@@ -305,3 +351,5 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | Microsoft      | Azure Cobalt 100| #3324339        | ARM64_ERRATUM_3194386       |
 +----------------+-----------------+-----------------+-----------------------------+
+| Microsoft      | Azure Cobalt 100| #4193789        | ARM64_ERRATUM_4118414       |
++----------------+-----------------+-----------------+-----------------------------+
diff --git linux-libre-6.18-gnu/Documentation/crypto/krb5.rst linux-libre-6.18.44-gnu/Documentation/crypto/krb5.rst
index beffa0133446d..f62e07ac68114 100644
--- linux-libre-6.18-gnu/Documentation/crypto/krb5.rst
+++ linux-libre-6.18.44-gnu/Documentation/crypto/krb5.rst
@@ -158,13 +158,22 @@ returned.
 When a message has been received, the location and size of the data with the
 message can be determined by calling::
 
-	void crypto_krb5_where_is_the_data(const struct krb5_enctype *krb5,
-					   enum krb5_crypto_mode mode,
-					   size_t *_offset, size_t *_len);
+	int crypto_krb5_where_is_the_data(const struct krb5_enctype *krb5,
+					  enum krb5_crypto_mode mode,
+					  size_t *_offset, size_t *_len);
 
 The caller provides the offset and length of the message to the function, which
 then alters those values to indicate the region containing the data (plus any
-padding).  It is up to the caller to determine how much padding there is.
+padding).  It is up to the caller to determine how much padding there is.  The
+function returns an error if the length is too small or if the mode is
+unsupported.  An additional function::
+
+	int crypto_krb5_check_data_len(const struct krb5_enctype *krb5,
+				       enum krb5_crypto_mode mode,
+				       size_t len, size_t min_content);
+
+is provided to just do a basic check that the decrypted/verified message would
+have a sufficient minimum payload.
 
 Preparation Functions
 ---------------------
diff --git linux-libre-6.18-gnu/Documentation/crypto/userspace-if.rst linux-libre-6.18.44-gnu/Documentation/crypto/userspace-if.rst
index f80f243e227e6..4630d3d74913b 100644
--- linux-libre-6.18-gnu/Documentation/crypto/userspace-if.rst
+++ linux-libre-6.18.44-gnu/Documentation/crypto/userspace-if.rst
@@ -328,33 +328,10 @@ CRYPTO_USER_API_RNG_CAVP option:
 Zero-Copy Interface
 -------------------
 
-In addition to the send/write/read/recv system call family, the AF_ALG
-interface can be accessed with the zero-copy interface of
-splice/vmsplice. As the name indicates, the kernel tries to avoid a copy
-operation into kernel space.
-
-The zero-copy operation requires data to be aligned at the page
-boundary. Non-aligned data can be used as well, but may require more
-operations of the kernel which would defeat the speed gains obtained
-from the zero-copy interface.
-
-The system-inherent limit for the size of one zero-copy operation is 16
-pages. If more data is to be sent to AF_ALG, user space must slice the
-input into segments with a maximum size of 16 pages.
-
-Zero-copy can be used with the following code example (a complete
-working example is provided with libkcapi):
-
-::
-
-    int pipes[2];
-
-    pipe(pipes);
-    /* input data in iov */
-    vmsplice(pipes[1], iov, iovlen, SPLICE_F_GIFT);
-    /* opfd is the file descriptor returned from accept() system call */
-    splice(pipes[0], NULL, opfd, NULL, ret, 0);
-    read(opfd, out, outlen);
+AF_ALG used to have zero-copy support, but it was removed due to it being a
+frequent source of vulnerabilities.  For backwards compatibility the splice()
+and sendfile() system calls are still supported, but the kernel will make an
+internal copy of the data before passing it to the crypto code.
 
 
 Setsockopt Interface
diff --git linux-libre-6.18-gnu/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml linux-libre-6.18.44-gnu/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml
index b90eec2077b4b..fe1272e86467e 100644
--- linux-libre-6.18-gnu/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml
+++ linux-libre-6.18.44-gnu/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml
@@ -66,7 +66,7 @@ then:
   required:
     - refresh-rate-hz
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git linux-libre-6.18-gnu/Documentation/devicetree/bindings/clock/qcom,x1e80100-camcc.yaml linux-libre-6.18.44-gnu/Documentation/devicetree/bindings/clock/qcom,x1e80100-camcc.yaml
index 938a2f1ff3fca..b28614186cc09 100644
--- linux-libre-6.18-gnu/Documentation/devicetree/bindings/clock/qcom,x1e80100-camcc.yaml
+++ linux-libre-6.18.44-gnu/Documentation/devicetree/bindings/clock/qcom,x1e80100-camcc.yaml
@@ -23,6 +23,7 @@ properties:
   compatible:
     enum:
       - qcom,x1e80100-camcc
+      - qcom,x1p42100-camcc
 
   reg:
     maxItems: 1
diff --git linux-libre-6.18-gnu/Documentation/devicetree/bindings/connector/usb-connector.yaml linux-libre-6.18.44-gnu/Documentation/devicetree/bindings/connector/usb-connector.yaml
index 11e40d225b9f3..d97b29e49bf55 100644
--- linux-libre-6.18-gnu/Documentation/devicetree/bindings/connector/usb-connector.yaml
+++ linux-libre-6.18.44-gnu/Documentation/devicetree/bindings/connector/usb-connector.yaml
@@ -301,6 +301,7 @@ properties:
     maxItems: 4
 
 dependencies:
+  pd-disable: [typec-power-opmode]
   sink-vdos-v1: [ sink-vdos ]
   sink-vdos: [ sink-vdos-v1 ]
 
diff --git linux-libre-6.18-gnu/Documentation/devicetree/bindings/display/msm/qcom,sm8750-mdss.yaml linux-libre-6.18.44-gnu/Documentation/devicetree/bindings/display/msm/qcom,sm8750-mdss.yaml
index 4151f475f3bc3..14942dfbdb09b 100644
--- linux-libre-6.18-gnu/Documentation/devicetree/bindings/display/msm/qcom,sm8750-mdss.yaml
+++ linux-libre-6.18.44-gnu/Documentation/devicetree/bindings/display/msm/qcom,sm8750-mdss.yaml
@@ -10,7 +10,7 @@ maintainers:
   - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
 
 description:
-  SM8650 MSM Mobile Display Subsystem(MDSS), which encapsulates sub-blocks like
+  SM8750 MSM Mobile Display Subsystem(MDSS), which encapsulates sub-blocks like
   DPU display controller, DSI and DP interfaces etc.
 
 $ref: /schemas/display/msm/mdss-common.yaml#
diff --git linux-libre-6.18-gnu/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml linux-libre-6.18.44-gnu/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml
index 361e9cae6896c..35c795f41e5fa 100644
--- linux-libre-6.18-gnu/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml
+++ linux-libre-6.18.44-gnu/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml
@@ -36,34 +36,50 @@ properties:
   reg:
     description:
       Addresses to each DSS memory region described in the SoC's TRM.
-    items:
-      - description: common DSS register area
-      - description: VIDL1 light video plane
-      - description: VID video plane
-      - description: OVR1 overlay manager for vp1
-      - description: OVR2 overlay manager for vp2
-      - description: VP1 video port 1
-      - description: VP2 video port 2
-      - description: common1 DSS register area
+    oneOf:
+      - items:
+          - description: common DSS register area
+          - description: VIDL1 light video plane
+          - description: VID video plane
+          - description: OVR1 overlay manager for vp1
+          - description: OVR2 overlay manager for vp2
+          - description: VP1 video port 1
+          - description: VP2 video port 2
+          - description: common1 DSS register area
+      - items:
+          - description: common DSS register area
+          - description: VIDL1 light video plane
+          - description: OVR1 overlay manager for vp1
+          - description: VP1 video port 1
+          - description: common1 DSS register area
 
   reg-names:
-    items:
-      - const: common
-      - const: vidl1
-      - const: vid
-      - const: ovr1
-      - const: ovr2
-      - const: vp1
-      - const: vp2
-      - const: common1
+    oneOf:
+      - items:
+          - const: common
+          - const: vidl1
+          - const: vid
+          - const: ovr1
+          - const: ovr2
+          - const: vp1
+          - const: vp2
+          - const: common1
+      - items:
+          - const: common
+          - const: vidl1
+          - const: ovr1
+          - const: vp1
+          - const: common1
 
   clocks:
+    minItems: 2
     items:
       - description: fck DSS functional clock
       - description: vp1 Video Port 1 pixel clock
       - description: vp2 Video Port 2 pixel clock
 
   clock-names:
+    minItems: 2
     items:
       - const: fck
       - const: vp1
@@ -180,6 +196,24 @@ allOf:
         ports:
           properties:
             port@1: false
+        reg:
+          maxItems: 5
+        reg-names:
+          maxItems: 5
+        clocks:
+          maxItems: 2
+        clock-names:
+          maxItems: 2
+    else:
+      properties:
+        reg:
+          minItems: 8
+        reg-names:
+          minItems: 8
+        clocks:
+          minItems: 3
+        clock-names:
+          minItems: 3
 
   - if:
       properties:
diff --git linux-libre-6.18-gnu/Documentation/devicetree/bindings/dma/nvidia,tegra186-gpc-dma.yaml linux-libre-6.18.44-gnu/Documentation/devicetree/bindings/dma/nvidia,tegra186-gpc-dma.yaml
index 0dabe9bbb219b..64f1e9d9896df 100644
--- linux-libre-6.18-gnu/Documentation/devicetree/bindings/dma/nvidia,tegra186-gpc-dma.yaml
+++ linux-libre-6.18.44-gnu/Documentation/devicetree/bindings/dma/nvidia,tegra186-gpc-dma.yaml
@@ -15,16 +15,14 @@ maintainers:
   - Jon Hunter <jonathanh@nvidia.com>
   - Rajesh Gumasta <rgumasta@nvidia.com>
 
-allOf:
-  - $ref: dma-controller.yaml#
-
 properties:
   compatible:
     oneOf:
-      - const: nvidia,tegra186-gpcdma
+      - enum:
+          - nvidia,tegra264-gpcdma
+          - nvidia,tegra186-gpcdma
       - items:
           - enum:
-              - nvidia,tegra264-gpcdma
               - nvidia,tegra234-gpcdma
               - nvidia,tegra194-gpcdma
           - const: nvidia,tegra186-gpcdma
@@ -60,12 +58,23 @@ required:
   - compatible
   - reg
   - interrupts
-  - resets
-  - reset-names
   - "#dma-cells"
   - iommus
   - dma-channel-mask
 
+allOf:
+  - $ref: dma-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra186-gpcdma
+    then:
+      required:
+        - resets
+        - reset-names
+
 additionalProperties: false
 
 examples:
diff --git linux-libre-6.18-gnu/Documentation/devicetree/bindings/gpio/microchip,mpfs-gpio.yaml linux-libre-6.18.44-gnu/Documentation/devicetree/bindings/gpio/microchip,mpfs-gpio.yaml
index d78da7dd2a566..dafd80bdd23aa 100644
--- linux-libre-6.18-gnu/Documentation/devicetree/bindings/gpio/microchip,mpfs-gpio.yaml
+++ linux-libre-6.18.44-gnu/Documentation/devicetree/bindings/gpio/microchip,mpfs-gpio.yaml
@@ -34,7 +34,7 @@ properties:
     const: 2
 
   "#interrupt-cells":
-    const: 1
+    const: 2
 
   ngpios:
     description:
@@ -83,7 +83,7 @@ examples:
         gpio-controller;
         #gpio-cells = <2>;
         interrupt-controller;
-        #interrupt-cells = <1>;
+        #interrupt-cells = <2>;
         interrupts = <53>, <53>, <53>, <53>,
                      <53>, <53>, <53>, <53>,
                      <53>, <53>, <53>, <53>,
diff --git linux-libre-6.18-gnu/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml linux-libre-6.18.44-gnu/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml
index f3247a47f9eed..71e6016fe3ca0 100644
--- linux-libre-6.18-gnu/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml
+++ linux-libre-6.18.44-gnu/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml
@@ -50,7 +50,7 @@ properties:
       The 2nd cell contains the interrupt number for the interrupt type.
       SPI interrupts are in the range [0-987]. PPI interrupts are in the
       range [0-15]. Extended SPI interrupts are in the range [0-1023].
-      Extended PPI interrupts are in the range [0-127].
+      Extended PPI interrupts are in the range [0-63].
 
       The 3rd cell is the flags, encoded as follows:
       bits[3:0] trigger type and level flags.
diff --git linux-libre-6.18-gnu/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-video-engine.yaml linux-libre-6.18.44-gnu/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-video-engine.yaml
index 541325f900a1d..01f2afa023f04 100644
--- linux-libre-6.18-gnu/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-video-engine.yaml
+++ linux-libre-6.18.44-gnu/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-video-engine.yaml
@@ -63,6 +63,16 @@ properties:
       CMA pool to use for buffers allocation instead of the default
       CMA pool.
 
+  # FIXME: This should be made required eventually once every SoC will
+  # have the MBUS declared.
+  interconnects:
+    maxItems: 1
+
+  # FIXME: This should be made required eventually once every SoC will
+  # have the MBUS declared.
+  interconnect-names:
+    const: dma-mem
+
 required:
   - compatible
   - reg
diff --git linux-libre-6.18-gnu/Documentation/devicetree/bindings/media/qcom,qcs8300-camss.yaml linux-libre-6.18.44-gnu/Documentation/devicetree/bindings/media/qcom,qcs8300-camss.yaml
index 80a4540a22dc2..e5f170aa4d9ee 100644
--- linux-libre-6.18-gnu/Documentation/devicetree/bindings/media/qcom,qcs8300-camss.yaml
+++ linux-libre-6.18.44-gnu/Documentation/devicetree/bindings/media/qcom,qcs8300-camss.yaml
@@ -120,6 +120,14 @@ properties:
     items:
       - const: top
 
+  vdda-phy-supply:
+    description:
+      Phandle to a 0.88V regulator supply to CSI PHYs.
+
+  vdda-pll-supply:
+    description:
+      Phandle to 1.2V regulator supply to CSI PHYs pll block.
+
   ports:
     $ref: /schemas/graph.yaml#/properties/ports
 
@@ -160,6 +168,8 @@ required:
   - power-domains
   - power-domain-names
   - ports
+  - vdda-phy-supply
+  - vdda-pll-supply
 
 additionalProperties: false
 
@@ -328,6 +338,9 @@ examples:
             power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
             power-domain-names = "top";
 
+            vdda-phy-supply = <&vreg_l4a_0p88>;
+            vdda-pll-supply = <&vreg_l1c_1p2>;
+
             ports {
                 #address-cells = <1>;
                 #size-cells = <0>;
diff --git linux-libre-6.18-gnu/Documentation/devicetree/bindings/media/rockchip,vdec.yaml linux-libre-6.18.44-gnu/Documentation/devicetree/bindings/media/rockchip,vdec.yaml
index 96b6c89387683..d0bce8bfb1b16 100644
--- linux-libre-6.18-gnu/Documentation/devicetree/bindings/media/rockchip,vdec.yaml
+++ linux-libre-6.18.44-gnu/Documentation/devicetree/bindings/media/rockchip,vdec.yaml
@@ -27,16 +27,20 @@ properties:
 
   reg:
     minItems: 1
-    items:
-      - description: The function configuration registers base
-      - description: The link table configuration registers base
-      - description: The cache configuration registers base
+    maxItems: 3
 
   reg-names:
-    items:
-      - const: function
-      - const: link
-      - const: cache
+    oneOf:
+      - items:
+          - const: link
+          - const: function
+          - const: cache
+      - items:
+          - const: function
+          - const: link
+          - const: cache
+        deprecated: true
+        description: Use link,function,cache block order instead.
 
   interrupts:
     maxItems: 1
@@ -122,6 +126,8 @@ allOf:
           minItems: 5
         reset-names:
           minItems: 5
+      required:
+        - reg-names
     else:
       properties:
         reg:
diff --git linux-libre-6.18-gnu/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml linux-libre-6.18.44-gnu/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml
index 9fce8cd7b0b62..d24950ccea952 100644
--- linux-libre-6.18-gnu/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml
+++ linux-libre-6.18.44-gnu/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml
@@ -41,7 +41,7 @@ properties:
 patternProperties:
   "^sdhci@[0-9a-f]+$":
     type: object
-    $ref: mmc-controller.yaml
+    $ref: sdhci-common.yaml
     unevaluatedProperties: false
 
     properties:
diff --git linux-libre-6.18-gnu/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml linux-libre-6.18.44-gnu/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml
index e9dd914b0734c..941f9a25bbea0 100644
--- linux-libre-6.18-gnu/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml
+++ linux-libre-6.18.44-gnu/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml
@@ -140,8 +140,6 @@ allOf:
     else:
       properties:
         spi-cpha: false
-      required:
-        - spi-cpol
 
 unevaluatedProperties: false
 
diff --git linux-libre-6.18-gnu/Documentation/devicetree/bindings/net/nvidia,tegra234-mgbe.yaml linux-libre-6.18.44-gnu/Documentation/devicetree/bindings/net/nvidia,tegra234-mgbe.yaml
index 2bd3efff2485e..215f14d1897d2 100644
--- linux-libre-6.18-gnu/Documentation/devicetree/bindings/net/nvidia,tegra234-mgbe.yaml
+++ linux-libre-6.18.44-gnu/Documentation/devicetree/bindings/net/nvidia,tegra234-mgbe.yaml
@@ -42,7 +42,7 @@ properties:
       - const: mgbe
       - const: mac
       - const: mac-divider
-      - const: ptp-ref
+      - const: ptp_ref
       - const: rx-input-m
       - const: rx-input
       - const: tx
@@ -133,7 +133,7 @@ examples:
                  <&bpmp TEGRA234_CLK_MGBE0_RX_PCS_M>,
                  <&bpmp TEGRA234_CLK_MGBE0_RX_PCS>,
                  <&bpmp TEGRA234_CLK_MGBE0_TX_PCS>;
-        clock-names = "mgbe", "mac", "mac-divider", "ptp-ref", "rx-input-m",
+        clock-names = "mgbe", "mac", "mac-divider", "ptp_ref", "rx-input-m",
                       "rx-input", "tx", "eee-pcs", "rx-pcs-input", "rx-pcs-m",
                       "rx-pcs", "tx-pcs";
         resets = <&bpmp TEGRA234_RESET_MGBE0_MAC>,
diff --git linux-libre-6.18-gnu/Documentation/devicetree/bindings/net/renesas,ether.yaml linux-libre-6.18.44-gnu/Documentation/devicetree/bindings/net/renesas,ether.yaml
index f0a52f47f95a0..dd7187f12a675 100644
--- linux-libre-6.18-gnu/Documentation/devicetree/bindings/net/renesas,ether.yaml
+++ linux-libre-6.18.44-gnu/Documentation/devicetree/bindings/net/renesas,ether.yaml
@@ -121,8 +121,7 @@ examples:
         #size-cells = <0>;
 
         phy1: ethernet-phy@1 {
-            compatible = "ethernet-phy-id0022.1537",
-                         "ethernet-phy-ieee802.3-c22";
+            compatible = "ethernet-phy-id0022.1537";
             reg = <1>;
             interrupt-parent = <&irqc0>;
             interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
diff --git linux-libre-6.18-gnu/Documentation/devicetree/bindings/pci/amlogic,axg-pcie.yaml linux-libre-6.18.44-gnu/Documentation/devicetree/bindings/pci/amlogic,axg-pcie.yaml
index 79a21ba0f9fd6..c8258ef403283 100644
--- linux-libre-6.18-gnu/Documentation/devicetree/bindings/pci/amlogic,axg-pcie.yaml
+++ linux-libre-6.18.44-gnu/Documentation/devicetree/bindings/pci/amlogic,axg-pcie.yaml
@@ -36,13 +36,13 @@ properties:
 
   reg:
     items:
-      - description: External local bus interface registers
+      - description: Data Bus Interface registers
       - description: Meson designed configuration registers
       - description: PCIe configuration space
 
   reg-names:
     items:
-      - const: elbi
+      - const: dbi
       - const: cfg
       - const: config
 
@@ -113,7 +113,7 @@ examples:
     pcie: pcie@f9800000 {
         compatible = "amlogic,axg-pcie", "snps,dw-pcie";
         reg = <0xf9800000 0x400000>, <0xff646000 0x2000>, <0xf9f00000 0x100000>;
-        reg-names = "elbi", "cfg", "config";
+        reg-names = "dbi", "cfg", "config";
         interrupts = <GIC_SPI 177 IRQ_TYPE_EDGE_RISING>;
         clocks = <&pclk>, <&clk_port>, <&clk_phy>;
         clock-names = "pclk", "port", "general";
diff --git linux-libre-6.18-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sc7280.yaml linux-libre-6.18.44-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sc7280.yaml
index 4d0a915566030..f760807b5feb6 100644
--- linux-libre-6.18-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sc7280.yaml
+++ linux-libre-6.18.44-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sc7280.yaml
@@ -76,6 +76,11 @@ properties:
     items:
       - const: pci
 
+required:
+  - power-domains
+  - resets
+  - reset-names
+
 allOf:
   - $ref: qcom,pcie-common.yaml#
 
diff --git linux-libre-6.18-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sc8280xp.yaml linux-libre-6.18.44-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sc8280xp.yaml
index 15ba2385eb73c..b6fb0e37cec59 100644
--- linux-libre-6.18-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sc8280xp.yaml
+++ linux-libre-6.18.44-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sc8280xp.yaml
@@ -61,6 +61,9 @@ properties:
 required:
   - interconnects
   - interconnect-names
+  - power-domains
+  - resets
+  - reset-names
 
 allOf:
   - $ref: qcom,pcie-common.yaml#
diff --git linux-libre-6.18-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sm8150.yaml linux-libre-6.18.44-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sm8150.yaml
index 26b247a41785f..17c0d58af37c6 100644
--- linux-libre-6.18-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sm8150.yaml
+++ linux-libre-6.18.44-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sm8150.yaml
@@ -74,6 +74,11 @@ properties:
     items:
       - const: pci
 
+required:
+  - power-domains
+  - resets
+  - reset-names
+
 allOf:
   - $ref: qcom,pcie-common.yaml#
 
diff --git linux-libre-6.18-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sm8250.yaml linux-libre-6.18.44-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sm8250.yaml
index af4dae68d5087..591f1a1eddde1 100644
--- linux-libre-6.18-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sm8250.yaml
+++ linux-libre-6.18.44-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sm8250.yaml
@@ -83,6 +83,11 @@ properties:
     items:
       - const: pci
 
+required:
+  - power-domains
+  - resets
+  - reset-names
+
 allOf:
   - $ref: qcom,pcie-common.yaml#
 
diff --git linux-libre-6.18-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sm8350.yaml linux-libre-6.18.44-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sm8350.yaml
index dde3079adbb33..299473af51d19 100644
--- linux-libre-6.18-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sm8350.yaml
+++ linux-libre-6.18.44-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sm8350.yaml
@@ -73,6 +73,11 @@ properties:
     items:
       - const: pci
 
+required:
+  - power-domains
+  - resets
+  - reset-names
+
 allOf:
   - $ref: qcom,pcie-common.yaml#
 
diff --git linux-libre-6.18-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sm8450.yaml linux-libre-6.18.44-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sm8450.yaml
index 6e0a6d8f0ed07..6a17d753122c6 100644
--- linux-libre-6.18-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sm8450.yaml
+++ linux-libre-6.18.44-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sm8450.yaml
@@ -77,6 +77,11 @@ properties:
     items:
       - const: pci
 
+required:
+  - power-domains
+  - resets
+  - reset-names
+
 allOf:
   - $ref: qcom,pcie-common.yaml#
 
diff --git linux-libre-6.18-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sm8550.yaml linux-libre-6.18.44-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sm8550.yaml
index 38b561e23c1fd..29d7df7aca60b 100644
--- linux-libre-6.18-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sm8550.yaml
+++ linux-libre-6.18.44-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sm8550.yaml
@@ -83,6 +83,11 @@ properties:
       - const: pci # PCIe core reset
       - const: link_down # PCIe link down reset
 
+required:
+  - power-domains
+  - resets
+  - reset-names
+
 allOf:
   - $ref: qcom,pcie-common.yaml#
 
diff --git linux-libre-6.18-gnu/Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml linux-libre-6.18.44-gnu/Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml
index eb97181cbb957..bfc4d75f50ff9 100644
--- linux-libre-6.18-gnu/Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml
+++ linux-libre-6.18.44-gnu/Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml
@@ -37,12 +37,15 @@ properties:
       - description: PLL register block
 
   clocks:
-    maxItems: 2
+    minItems: 2
+    maxItems: 3
 
   clock-names:
+    minItems: 2
     items:
       - const: aux
       - const: cfg_ahb
+      - const: ref
 
   "#clock-cells":
     const: 1
@@ -64,6 +67,29 @@ required:
   - "#clock-cells"
   - "#phy-cells"
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,x1e80100-dp-phy
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          minItems: 3
+          maxItems: 3
+    else:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          minItems: 2
+          maxItems: 2
+
 additionalProperties: false
 
 examples:
diff --git linux-libre-6.18-gnu/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml linux-libre-6.18.44-gnu/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml
index 119b4ff36dbd6..19d7de3ce7a96 100644
--- linux-libre-6.18-gnu/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml
+++ linux-libre-6.18.44-gnu/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml
@@ -134,13 +134,22 @@ allOf:
           items:
             - description: port a
             - description: port b
-      required:
-        - qcom,4ln-config-sel
     else:
       properties:
         reg:
           maxItems: 1
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc8280xp-qmp-gen3x4-pcie-phy
+              - qcom,x1e80100-qmp-gen4x4-pcie-phy
+    then:
+      required:
+        - qcom,4ln-config-sel
+
   - if:
       properties:
         compatible:
diff --git linux-libre-6.18-gnu/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux-aon.yaml linux-libre-6.18.44-gnu/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux-aon.yaml
index db8224dfba2c1..56fb9cf763ef7 100644
--- linux-libre-6.18-gnu/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux-aon.yaml
+++ linux-libre-6.18.44-gnu/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux-aon.yaml
@@ -58,6 +58,10 @@ patternProperties:
                     drive_soc_gpio27_pee6, drive_ao_retention_n_pee2,
                     drive_vcomp_alert_pee1, drive_hdmi_cec_pgg0 ]
 
+required:
+  - compatible
+  - reg
+
 unevaluatedProperties: false
 
 examples:
diff --git linux-libre-6.18-gnu/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux.yaml linux-libre-6.18.44-gnu/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux.yaml
index f5a3a881dec4f..bd305a34eee2b 100644
--- linux-libre-6.18-gnu/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux.yaml
+++ linux-libre-6.18.44-gnu/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux.yaml
@@ -115,6 +115,10 @@ patternProperties:
                     drive_sdmmc1_dat2_pj4, drive_sdmmc1_dat1_pj3,
                     drive_sdmmc1_dat0_pj2 ]
 
+required:
+  - compatible
+  - reg
+
 unevaluatedProperties: false
 
 examples:
diff --git linux-libre-6.18-gnu/Documentation/devicetree/bindings/regulator/mt6359-regulator.yaml linux-libre-6.18.44-gnu/Documentation/devicetree/bindings/regulator/mt6359-regulator.yaml
index d6b3b5a5c0b34..5e4b1e7417950 100644
--- linux-libre-6.18-gnu/Documentation/devicetree/bindings/regulator/mt6359-regulator.yaml
+++ linux-libre-6.18.44-gnu/Documentation/devicetree/bindings/regulator/mt6359-regulator.yaml
@@ -18,84 +18,41 @@ patternProperties:
   "^buck_v(s1|gpu11|modem|pu|core|s2|pa|proc2|proc1|core_sshub)$":
     type: object
     $ref: regulator.yaml#
-
-    properties:
-      regulator-name:
-        pattern: "^v(s1|gpu11|modem|pu|core|s2|pa|proc2|proc1|core_sshub)$"
-
     unevaluatedProperties: false
 
   "^ldo_v(ibr|rf12|usb|camio|efuse|xo22)$":
     type: object
     $ref: regulator.yaml#
-
-    properties:
-      regulator-name:
-        pattern: "^v(ibr|rf12|usb|camio|efuse|xo22)$"
-
     unevaluatedProperties: false
 
   "^ldo_v(rfck|emc|a12|a09|ufs|bbck)$":
     type: object
     $ref: regulator.yaml#
-
-    properties:
-      regulator-name:
-        pattern: "^v(rfck|emc|a12|a09|ufs|bbck)$"
-
     unevaluatedProperties: false
 
   "^ldo_vcn(18|13|33_1_bt|13_1_wifi|33_2_bt|33_2_wifi)$":
     type: object
     $ref: regulator.yaml#
-
-    properties:
-      regulator-name:
-        pattern: "^vcn(18|13|33_1_bt|13_1_wifi|33_2_bt|33_2_wifi)$"
-
     unevaluatedProperties: false
 
   "^ldo_vsram_(proc2|others|md|proc1|others_sshub)$":
     type: object
     $ref: regulator.yaml#
-
-    properties:
-      regulator-name:
-        pattern: "^vsram_(proc2|others|md|proc1|others_sshub)$"
-
     unevaluatedProperties: false
 
   "^ldo_v(fe|bif|io)28$":
     type: object
     $ref: regulator.yaml#
-
-    properties:
-      regulator-name:
-        pattern: "^v(fe|bif|io)28$"
-
     unevaluatedProperties: false
 
   "^ldo_v(aud|io|aux|rf|m)18$":
     type: object
     $ref: regulator.yaml#
-
-    properties:
-      regulator-name:
-        pattern: "^v(aud|io|aux|rf|m)18$"
-
     unevaluatedProperties: false
 
   "^ldo_vsim[12]$":
     type: object
     $ref: regulator.yaml#
-
-    properties:
-      regulator-name:
-        pattern: "^vsim[12]$"
-
-    required:
-      - regulator-name
-
     unevaluatedProperties: false
 
 additionalProperties: false
diff --git linux-libre-6.18-gnu/Documentation/devicetree/bindings/serial/renesas,rsci.yaml linux-libre-6.18.44-gnu/Documentation/devicetree/bindings/serial/renesas,rsci.yaml
index f50d8e02f4764..6b1f827a335b3 100644
--- linux-libre-6.18-gnu/Documentation/devicetree/bindings/serial/renesas,rsci.yaml
+++ linux-libre-6.18.44-gnu/Documentation/devicetree/bindings/serial/renesas,rsci.yaml
@@ -54,8 +54,6 @@ properties:
   power-domains:
     maxItems: 1
 
-  uart-has-rtscts: false
-
 required:
   - compatible
   - reg
diff --git linux-libre-6.18-gnu/Documentation/devicetree/bindings/slimbus/slimbus.yaml linux-libre-6.18.44-gnu/Documentation/devicetree/bindings/slimbus/slimbus.yaml
index 89017d9cda109..5a941610ce4ed 100644
--- linux-libre-6.18-gnu/Documentation/devicetree/bindings/slimbus/slimbus.yaml
+++ linux-libre-6.18.44-gnu/Documentation/devicetree/bindings/slimbus/slimbus.yaml
@@ -75,16 +75,22 @@ examples:
         #size-cells = <1>;
         ranges;
 
-        slim@28080000 {
+        controller@28080000 {
             compatible = "qcom,slim-ngd-v1.5.0";
             reg = <0x091c0000 0x2c000>;
             interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
-            #address-cells = <2>;
+            dmas = <&slimbam 3>, <&slimbam 4>;
+            dma-names = "rx", "tx";
+            #address-cells = <1>;
             #size-cells = <0>;
-
-            audio-codec@1,0 {
+            slim@1 {
+              reg = <1>;
+              #address-cells = <2>;
+              #size-cells = <0>;
+              codec@1,0 {
                 compatible = "slim217,1a0";
                 reg = <1 0>;
+              };
             };
+          };
         };
-    };
diff --git linux-libre-6.18-gnu/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml linux-libre-6.18.44-gnu/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml
index e28ef198a801c..039c8e4a4c51b 100644
--- linux-libre-6.18-gnu/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml
+++ linux-libre-6.18.44-gnu/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml
@@ -13,23 +13,21 @@ description: |
 maintainers:
   - Nicolas Saenz Julienne <nsaenz@kernel.org>
 
-allOf:
-  - $ref: /schemas/watchdog/watchdog.yaml#
-
 properties:
   compatible:
     items:
       - enum:
           - brcm,bcm2835-pm
           - brcm,bcm2711-pm
+          - brcm,bcm2712-pm
       - const: brcm,bcm2835-pm-wdt
 
   reg:
-    minItems: 2
+    minItems: 1
     maxItems: 3
 
   reg-names:
-    minItems: 2
+    minItems: 1
     items:
       - const: pm
       - const: asb
@@ -62,7 +60,35 @@ required:
   - reg
   - "#power-domain-cells"
   - "#reset-cells"
-  - clocks
+
+allOf:
+  - $ref: /schemas/watchdog/watchdog.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - brcm,bcm2835-pm
+              - brcm,bcm2711-pm
+    then:
+      required:
+        - clocks
+
+      properties:
+        reg:
+          minItems: 2
+
+        reg-names:
+          minItems: 2
+
+    else:
+      properties:
+        reg:
+          maxItems: 1
+
+        reg-names:
+          maxItems: 1
 
 additionalProperties: false
 
diff --git linux-libre-6.18-gnu/Documentation/devicetree/bindings/sound/asahi-kasei,ak4458.yaml linux-libre-6.18.44-gnu/Documentation/devicetree/bindings/sound/asahi-kasei,ak4458.yaml
index 1fdbeecc5eff9..3a3313ea0890a 100644
--- linux-libre-6.18-gnu/Documentation/devicetree/bindings/sound/asahi-kasei,ak4458.yaml
+++ linux-libre-6.18.44-gnu/Documentation/devicetree/bindings/sound/asahi-kasei,ak4458.yaml
@@ -21,10 +21,10 @@ properties:
   reg:
     maxItems: 1
 
-  avdd-supply:
+  AVDD-supply:
     description: Analog power supply
 
-  dvdd-supply:
+  DVDD-supply:
     description: Digital power supply
 
   reset-gpios:
@@ -60,7 +60,7 @@ allOf:
       properties:
         dsd-path: false
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git linux-libre-6.18-gnu/Documentation/devicetree/bindings/sound/asahi-kasei,ak5558.yaml linux-libre-6.18.44-gnu/Documentation/devicetree/bindings/sound/asahi-kasei,ak5558.yaml
index d3d494ae8abfe..dc8f85f266bf3 100644
--- linux-libre-6.18-gnu/Documentation/devicetree/bindings/sound/asahi-kasei,ak5558.yaml
+++ linux-libre-6.18.44-gnu/Documentation/devicetree/bindings/sound/asahi-kasei,ak5558.yaml
@@ -19,10 +19,10 @@ properties:
   reg:
     maxItems: 1
 
-  avdd-supply:
+  AVDD-supply:
     description: A 1.8V supply that powers up the AVDD pin.
 
-  dvdd-supply:
+  DVDD-supply:
     description: A 1.2V supply that powers up the DVDD pin.
 
   reset-gpios:
diff --git linux-libre-6.18-gnu/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml linux-libre-6.18.44-gnu/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml
index 4a7129d0b1574..551edf39e7663 100644
--- linux-libre-6.18-gnu/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml
+++ linux-libre-6.18.44-gnu/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml
@@ -164,7 +164,7 @@ allOf:
       properties:
         compatible:
           contains:
-            const: st,stm32mph7-sai
+            const: st,stm32h7-sai
     then:
       properties:
         clocks:
diff --git linux-libre-6.18-gnu/Documentation/devicetree/bindings/timer/sifive,clint.yaml linux-libre-6.18.44-gnu/Documentation/devicetree/bindings/timer/sifive,clint.yaml
index d85a1a088b35d..0c809819b69d7 100644
--- linux-libre-6.18-gnu/Documentation/devicetree/bindings/timer/sifive,clint.yaml
+++ linux-libre-6.18.44-gnu/Documentation/devicetree/bindings/timer/sifive,clint.yaml
@@ -69,22 +69,6 @@ properties:
     minItems: 1
     maxItems: 4095
 
-  sifive,fine-ctr-bits:
-    maximum: 15
-    description: The width in bits of the fine counter.
-
-if:
-  properties:
-    compatible:
-      contains:
-        const: sifive,clint2
-then:
-  required:
-    - sifive,fine-ctr-bits
-else:
-  properties:
-    sifive,fine-ctr-bits: false
-
 additionalProperties: false
 
 required:
diff --git linux-libre-6.18-gnu/Documentation/devicetree/bindings/ufs/rockchip,rk3576-ufshc.yaml linux-libre-6.18.44-gnu/Documentation/devicetree/bindings/ufs/rockchip,rk3576-ufshc.yaml
index c7d17cf4dc42b..e738153a309c8 100644
--- linux-libre-6.18-gnu/Documentation/devicetree/bindings/ufs/rockchip,rk3576-ufshc.yaml
+++ linux-libre-6.18.44-gnu/Documentation/devicetree/bindings/ufs/rockchip,rk3576-ufshc.yaml
@@ -41,7 +41,7 @@ properties:
     maxItems: 1
 
   resets:
-    maxItems: 4
+    maxItems: 5
 
   reset-names:
     items:
@@ -49,6 +49,7 @@ properties:
       - const: sys
       - const: ufs
       - const: grf
+      - const: mphy
 
   reset-gpios:
     maxItems: 1
@@ -98,8 +99,8 @@ examples:
             interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>;
             power-domains = <&power RK3576_PD_USB>;
             resets = <&cru SRST_A_UFS_BIU>, <&cru SRST_A_UFS_SYS>, <&cru SRST_A_UFS>,
-                     <&cru SRST_P_UFS_GRF>;
-            reset-names = "biu", "sys", "ufs", "grf";
+                     <&cru SRST_P_UFS_GRF>, <&cru SRST_MPHY_INIT>;
+            reset-names = "biu", "sys", "ufs", "grf", "mphy";
             reset-gpios = <&gpio4 RK_PD0 GPIO_ACTIVE_LOW>;
         };
     };
diff --git linux-libre-6.18-gnu/Documentation/devicetree/bindings/vendor-prefixes.yaml linux-libre-6.18.44-gnu/Documentation/devicetree/bindings/vendor-prefixes.yaml
index f1d1882009ba9..a9cf85fd6fbec 100644
--- linux-libre-6.18-gnu/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ linux-libre-6.18.44-gnu/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -419,6 +419,8 @@ patternProperties:
     description: Diodes, Inc.
   "^dioo,.*":
     description: Dioo Microcircuit Co., Ltd
+  "^displaytech,.*":
+    description: Displaytech Ltd.
   "^djn,.*":
     description: Shenzhen DJN Optronics Technology Co., Ltd
   "^dlc,.*":
diff --git linux-libre-6.18-gnu/Documentation/driver-api/dpll.rst linux-libre-6.18.44-gnu/Documentation/driver-api/dpll.rst
index be1fc643b645e..83118c728ed90 100644
--- linux-libre-6.18-gnu/Documentation/driver-api/dpll.rst
+++ linux-libre-6.18.44-gnu/Documentation/driver-api/dpll.rst
@@ -198,26 +198,28 @@ be requested with the same attribute with ``DPLL_CMD_DEVICE_SET`` command.
   ================================== ======================================
 
 Device may also provide ability to adjust a signal phase on a pin.
-If pin phase adjustment is supported, minimal and maximal values that pin
-handle shall be provide to the user on ``DPLL_CMD_PIN_GET`` respond
-with ``DPLL_A_PIN_PHASE_ADJUST_MIN`` and ``DPLL_A_PIN_PHASE_ADJUST_MAX``
+If pin phase adjustment is supported, minimal and maximal values and
+granularity that pin handle shall be provided to the user on
+``DPLL_CMD_PIN_GET`` respond with ``DPLL_A_PIN_PHASE_ADJUST_MIN``,
+``DPLL_A_PIN_PHASE_ADJUST_MAX`` and ``DPLL_A_PIN_PHASE_ADJUST_GRAN``
 attributes. Configured phase adjust value is provided with
 ``DPLL_A_PIN_PHASE_ADJUST`` attribute of a pin, and value change can be
 requested with the same attribute with ``DPLL_CMD_PIN_SET`` command.
 
-  =============================== ======================================
-  ``DPLL_A_PIN_ID``               configured pin id
-  ``DPLL_A_PIN_PHASE_ADJUST_MIN`` attr minimum value of phase adjustment
-  ``DPLL_A_PIN_PHASE_ADJUST_MAX`` attr maximum value of phase adjustment
-  ``DPLL_A_PIN_PHASE_ADJUST``     attr configured value of phase
-                                  adjustment on parent dpll device
-  ``DPLL_A_PIN_PARENT_DEVICE``    nested attribute for requesting
-                                  configuration on given parent dpll
-                                  device
-    ``DPLL_A_PIN_PARENT_ID``      parent dpll device id
-    ``DPLL_A_PIN_PHASE_OFFSET``   attr measured phase difference
-                                  between a pin and parent dpll device
-  =============================== ======================================
+  ================================ ==========================================
+  ``DPLL_A_PIN_ID``                configured pin id
+  ``DPLL_A_PIN_PHASE_ADJUST_GRAN`` attr granularity of phase adjustment value
+  ``DPLL_A_PIN_PHASE_ADJUST_MIN``  attr minimum value of phase adjustment
+  ``DPLL_A_PIN_PHASE_ADJUST_MAX``  attr maximum value of phase adjustment
+  ``DPLL_A_PIN_PHASE_ADJUST``      attr configured value of phase
+                                   adjustment on parent dpll device
+  ``DPLL_A_PIN_PARENT_DEVICE``     nested attribute for requesting
+                                   configuration on given parent dpll
+                                   device
+    ``DPLL_A_PIN_PARENT_ID``       parent dpll device id
+    ``DPLL_A_PIN_PHASE_OFFSET``    attr measured phase difference
+                                   between a pin and parent dpll device
+  ================================ ==========================================
 
 All phase related values are provided in pico seconds, which represents
 time difference between signals phase. The negative value means that
@@ -384,6 +386,8 @@ according to attribute purpose.
                                        frequencies
       ``DPLL_A_PIN_ANY_FREQUENCY_MIN`` attr minimum value of frequency
       ``DPLL_A_PIN_ANY_FREQUENCY_MAX`` attr maximum value of frequency
+    ``DPLL_A_PIN_PHASE_ADJUST_GRAN``   attr granularity of phase
+                                       adjustment value
     ``DPLL_A_PIN_PHASE_ADJUST_MIN``    attr minimum value of phase
                                        adjustment
     ``DPLL_A_PIN_PHASE_ADJUST_MAX``    attr maximum value of phase
diff --git linux-libre-6.18-gnu/Documentation/driver-api/nvdimm/btt.rst linux-libre-6.18.44-gnu/Documentation/driver-api/nvdimm/btt.rst
index 107395c042ae0..cb1afe9dc3cbb 100644
--- linux-libre-6.18-gnu/Documentation/driver-api/nvdimm/btt.rst
+++ linux-libre-6.18.44-gnu/Documentation/driver-api/nvdimm/btt.rst
@@ -161,9 +161,8 @@ process::
 	nlanes = min(nfree, num_cpus)
 
 A lane number is obtained at the start of any IO, and is used for indexing into
-all the on-disk and in-memory data structures for the duration of the IO. If
-there are more CPUs than the max number of available lanes, than lanes are
-protected by spinlocks.
+all the on-disk and in-memory data structures for the duration of the IO. Lanes
+are protected by mutexes.
 
 
 d. In-memory data structure: Read Tracking Table (RTT)
diff --git linux-libre-6.18-gnu/Documentation/driver-api/pci/pci.rst linux-libre-6.18.44-gnu/Documentation/driver-api/pci/pci.rst
index 59d86e8271986..99a1bbaaec5d0 100644
--- linux-libre-6.18-gnu/Documentation/driver-api/pci/pci.rst
+++ linux-libre-6.18.44-gnu/Documentation/driver-api/pci/pci.rst
@@ -37,6 +37,9 @@ PCI Support Library
 .. kernel-doc:: drivers/pci/slot.c
    :export:
 
+.. kernel-doc:: drivers/pci/rebar.c
+   :export:
+
 .. kernel-doc:: drivers/pci/rom.c
    :export:
 
diff --git linux-libre-6.18-gnu/Documentation/filesystems/overlayfs.rst linux-libre-6.18.44-gnu/Documentation/filesystems/overlayfs.rst
index ab989807a2cb6..c493fcbe0df4a 100644
--- linux-libre-6.18-gnu/Documentation/filesystems/overlayfs.rst
+++ linux-libre-6.18.44-gnu/Documentation/filesystems/overlayfs.rst
@@ -783,6 +783,56 @@ controlled by the "uuid" mount option, which supports these values:
     mounted with "uuid=on".
 
 
+Durability and copy up
+----------------------
+
+The fsync(2) system call ensures that the data and metadata of a file
+are safely written to the backing storage, which is expected to
+guarantee the existence of the information post system crash.
+
+Without an fsync(2) call, there is no guarantee that the observed
+data after a system crash will be either the old or the new data, but
+in practice, the observed data after crash is often the old or new data
+or a mix of both.
+
+When an overlayfs file is modified for the first time, copy up will
+create a copy of the lower file and its parent directories in the upper
+layer.  Since the Linux filesystem API does not enforce any particular
+ordering on storing changes without explicit fsync(2) calls, in case
+of a system crash, the upper file could end up with no data at all
+(i.e. zeros), which would be an unusual outcome.  To avoid this
+experience, overlayfs calls fsync(2) on the upper file before completing
+data copy up with rename(2) or link(2) to make the copy up "atomic".
+
+By default, overlayfs does not explicitly call fsync(2) on copied up
+directories or on metadata-only copy up, so it provides no guarantee to
+persist the user's modification unless the user calls fsync(2).
+The fsync during copy up only guarantees that if a copy up is observed
+after a crash, the observed data is not zeroes or intermediate values
+from the copy up staging area.
+
+On traditional local filesystems with a single journal (e.g. ext4, xfs),
+fsync on a file also persists the parent directory changes, because they
+are usually modified in the same transaction, so metadata durability during
+data copy up effectively comes for free.  Overlayfs further limits risk by
+disallowing network filesystems as upper layer.
+
+Overlayfs can be tuned to prefer performance or durability when storing
+to the underlying upper layer.  This is controlled by the "fsync" mount
+option, which supports these values:
+
+- "auto": (default)
+    Call fsync(2) on upper file before completion of data copy up.
+    No explicit fsync(2) on directory or metadata-only copy up.
+- "strict":
+    Call fsync(2) on upper file and directories before completion of any
+    copy up.
+- "volatile": [*]
+    Prefer performance over durability (see `Volatile mount`_)
+
+[*] The mount option "volatile" is an alias to "fsync=volatile".
+
+
 Volatile mount
 --------------
 
diff --git linux-libre-6.18-gnu/Documentation/filesystems/proc.rst linux-libre-6.18.44-gnu/Documentation/filesystems/proc.rst
index 0b86a8022fa1e..cf7eee2d9b61d 100644
--- linux-libre-6.18-gnu/Documentation/filesystems/proc.rst
+++ linux-libre-6.18.44-gnu/Documentation/filesystems/proc.rst
@@ -23,13 +23,13 @@ fixes/update part 1.1  Stefani Seibold <stefani@seibold.net>    June 9 2009
   1	Collecting System Information
   1.1	Process-Specific Subdirectories
   1.2	Kernel data
-  1.3	IDE devices in /proc/ide
-  1.4	Networking info in /proc/net
-  1.5	SCSI info
-  1.6	Parallel port info in /proc/parport
-  1.7	TTY info in /proc/tty
-  1.8	Miscellaneous kernel statistics in /proc/stat
-  1.9	Ext4 file system parameters
+  1.3	Networking info in /proc/net
+  1.4	SCSI info
+  1.5	Parallel port info in /proc/parport
+  1.6	TTY info in /proc/tty
+  1.7	Miscellaneous kernel statistics in /proc/stat
+  1.8	Ext4 file system parameters
+  1.9	/proc/consoles - Shows registered system consoles
 
   2	Modifying System Parameters
 
@@ -553,7 +553,7 @@ otherwise.
 kernel flags associated with the particular virtual memory area in two letter
 encoded manner. The codes are the following:
 
-    ==    =======================================
+    ==    =============================================================
     rd    readable
     wr    writeable
     ex    executable
@@ -591,7 +591,8 @@ encoded manner. The codes are the following:
     sl    sealed
     lf    lock on fault pages
     dp    always lazily freeable mapping
-    ==    =======================================
+    gu    maybe contains guard regions (if not set, definitely doesn't)
+    ==    =============================================================
 
 Note that there is no guarantee that every flag and associated mnemonic will
 be present in all further kernel releases. Things get changed, the flags may
diff --git linux-libre-6.18-gnu/Documentation/gpu/drm-kms-helpers.rst linux-libre-6.18.44-gnu/Documentation/gpu/drm-kms-helpers.rst
index 5139705089f20..781129f78b06b 100644
--- linux-libre-6.18-gnu/Documentation/gpu/drm-kms-helpers.rst
+++ linux-libre-6.18.44-gnu/Documentation/gpu/drm-kms-helpers.rst
@@ -92,6 +92,18 @@ GEM Atomic Helper Reference
 .. kernel-doc:: drivers/gpu/drm/drm_gem_atomic_helper.c
    :export:
 
+VBLANK Helper Reference
+-----------------------
+
+.. kernel-doc:: drivers/gpu/drm/drm_vblank_helper.c
+   :doc: overview
+
+.. kernel-doc:: include/drm/drm_vblank_helper.h
+   :internal:
+
+.. kernel-doc:: drivers/gpu/drm/drm_vblank_helper.c
+   :export:
+
 Simple KMS Helper Reference
 ===========================
 
diff --git linux-libre-6.18-gnu/Documentation/gpu/drm-mm.rst linux-libre-6.18.44-gnu/Documentation/gpu/drm-mm.rst
index d55751cad67cf..8e0d31230b29b 100644
--- linux-libre-6.18-gnu/Documentation/gpu/drm-mm.rst
+++ linux-libre-6.18.44-gnu/Documentation/gpu/drm-mm.rst
@@ -509,8 +509,14 @@ DRM GPUVM Function References
 DRM Buddy Allocator
 ===================
 
-DRM Buddy Function References
------------------------------
+Buddy Allocator Function References (GPU buddy)
+-----------------------------------------------
+
+.. kernel-doc:: drivers/gpu/buddy.c
+   :export:
+
+DRM Buddy Specific Logging Function References
+----------------------------------------------
 
 .. kernel-doc:: drivers/gpu/drm/drm_buddy.c
    :export:
diff --git linux-libre-6.18-gnu/Documentation/hwmon/adm1177.rst linux-libre-6.18.44-gnu/Documentation/hwmon/adm1177.rst
index 1c85a2af92bf7..375f6d6e03a7d 100644
--- linux-libre-6.18-gnu/Documentation/hwmon/adm1177.rst
+++ linux-libre-6.18.44-gnu/Documentation/hwmon/adm1177.rst
@@ -27,10 +27,10 @@ for details.
 Sysfs entries
 -------------
 
-The following attributes are supported. Current maxim attribute
+The following attributes are supported. Current maximum attribute
 is read-write, all other attributes are read-only.
 
-in0_input		Measured voltage in microvolts.
+in0_input		Measured voltage in millivolts.
 
-curr1_input		Measured current in microamperes.
-curr1_max_alarm		Overcurrent alarm in microamperes.
+curr1_input		Measured current in milliamperes.
+curr1_max		Overcurrent shutdown threshold in milliamperes.
diff --git linux-libre-6.18-gnu/Documentation/hwmon/aht10.rst linux-libre-6.18.44-gnu/Documentation/hwmon/aht10.rst
index 213644b4ecba6..7903b6434326d 100644
--- linux-libre-6.18-gnu/Documentation/hwmon/aht10.rst
+++ linux-libre-6.18.44-gnu/Documentation/hwmon/aht10.rst
@@ -20,6 +20,14 @@ Supported chips:
 
       English: http://www.aosong.com/userfiles/files/media/Data%20Sheet%20AHT20.pdf
 
+  * Aosong DHT20
+
+    Prefix: 'dht20'
+
+    Addresses scanned: None
+
+    Datasheet: https://www.digikey.co.nz/en/htmldatasheets/production/9184855/0/0/1/101020932
+
 Author: Johannes Cornelis Draaijer <jcdra1@gmail.com>
 
 
@@ -33,7 +41,7 @@ The address of this i2c device may only be 0x38
 Special Features
 ----------------
 
-AHT20 has additional CRC8 support which is sent as the last byte of the sensor
+AHT20, DHT20 has additional CRC8 support which is sent as the last byte of the sensor
 values.
 
 Usage Notes
diff --git linux-libre-6.18-gnu/Documentation/hwmon/g762.rst linux-libre-6.18.44-gnu/Documentation/hwmon/g762.rst
index 0371b3365c48c..f224552a2d3cc 100644
--- linux-libre-6.18-gnu/Documentation/hwmon/g762.rst
+++ linux-libre-6.18.44-gnu/Documentation/hwmon/g762.rst
@@ -17,7 +17,7 @@ done via a userland daemon like fancontrol.
 Note that those entries do not provide ways to setup the specific
 hardware characteristics of the system (reference clock, pulses per
 fan revolution, ...); Those can be modified via devicetree bindings
-documented in Documentation/devicetree/bindings/hwmon/g762.txt or
+documented in Documentation/devicetree/bindings/hwmon/gmt,g762.yaml or
 using a specific platform_data structure in board initialization
 file (see include/linux/platform_data/g762.h).
 
diff --git linux-libre-6.18-gnu/Documentation/hwmon/ina2xx.rst linux-libre-6.18.44-gnu/Documentation/hwmon/ina2xx.rst
index a3860aae444c0..d64e7af46a124 100644
--- linux-libre-6.18-gnu/Documentation/hwmon/ina2xx.rst
+++ linux-libre-6.18.44-gnu/Documentation/hwmon/ina2xx.rst
@@ -74,6 +74,16 @@ Supported chips:
 	       https://us1.silergy.com/
 
 
+  * Texas Instruments INA234
+
+    Prefix: 'ina234'
+
+    Addresses: I2C 0x40 - 0x43
+
+    Datasheet: Publicly available at the Texas Instruments website
+
+	       https://www.ti.com/
+
 Author: Lothar Felten <lothar.felten@gmail.com>
 
 Description
@@ -89,7 +99,7 @@ interface. The INA220 monitors both shunt drop and supply voltage.
 The INA226 is a current shunt and power monitor with an I2C interface.
 The INA226 monitors both a shunt voltage drop and bus supply voltage.
 
-INA230 and INA231 are high or low side current shunt and power monitors
+INA230, INA231, and INA234 are high or low side current shunt and power monitors
 with an I2C interface. The chips monitor both a shunt voltage drop and
 bus supply voltage.
 
@@ -124,8 +134,17 @@ power1_input		Power(uW) measurement channel
 shunt_resistor		Shunt resistance(uOhm) channel (not for ina260)
 ======================= ===============================================
 
-Additional sysfs entries for ina226, ina230, ina231, ina260, and sy24655
-------------------------------------------------------------------------
+Additional sysfs entries
+------------------------
+
+Additional entries are available for the following chips:
+
+  * ina226
+  * ina230
+  * ina231
+  * ina234
+  * ina260
+  * sy24655
 
 ======================= ====================================================
 curr1_lcrit		Critical low current
diff --git linux-libre-6.18-gnu/Documentation/hwmon/nct6683.rst linux-libre-6.18.44-gnu/Documentation/hwmon/nct6683.rst
index 3e549ba95a15a..45eec9dd349aa 100644
--- linux-libre-6.18-gnu/Documentation/hwmon/nct6683.rst
+++ linux-libre-6.18.44-gnu/Documentation/hwmon/nct6683.rst
@@ -65,6 +65,7 @@ AMD BC-250			NCT6686D EC firmware version 1.0 build 07/28/21
 ASRock X570			NCT6683D EC firmware version 1.0 build 06/28/19
 ASRock X670E			NCT6686D EC firmware version 1.0 build 05/19/22
 ASRock B650 Steel Legend WiFi	NCT6686D EC firmware version 1.0 build 11/09/23
+ASRock Z590 Taichi		NCT6686D EC firmware version 1.0 build 01/25/21
 MSI B550			NCT6687D EC firmware version 1.0 build 05/07/20
 MSI X670-P			NCT6687D EC firmware version 0.0 build 09/27/22
 MSI X870E			NCT6687D EC firmware version 0.0 build 11/13/24
diff --git linux-libre-6.18-gnu/Documentation/hwmon/peci-cputemp.rst linux-libre-6.18.44-gnu/Documentation/hwmon/peci-cputemp.rst
index fe0422248dc5e..266b62a46f49c 100644
--- linux-libre-6.18-gnu/Documentation/hwmon/peci-cputemp.rst
+++ linux-libre-6.18.44-gnu/Documentation/hwmon/peci-cputemp.rst
@@ -51,8 +51,9 @@ temp1_max		Provides thermal control temperature of the CPU package
 temp1_crit		Provides shutdown temperature of the CPU package which
 			is also known as the maximum processor junction
 			temperature, Tjmax or Tprochot.
-temp1_crit_hyst		Provides the hysteresis value from Tcontrol to Tjmax of
-			the CPU package.
+temp1_crit_hyst		Provides the hysteresis temperature of the CPU
+			package. Returns Tcontrol, the temperature at which
+			the critical condition clears.
 
 temp2_label		"DTS"
 temp2_input		Provides current temperature of the CPU package scaled
@@ -62,8 +63,9 @@ temp2_max		Provides thermal control temperature of the CPU package
 temp2_crit		Provides shutdown temperature of the CPU package which
 			is also known as the maximum processor junction
 			temperature, Tjmax or Tprochot.
-temp2_crit_hyst		Provides the hysteresis value from Tcontrol to Tjmax of
-			the CPU package.
+temp2_crit_hyst		Provides the hysteresis temperature of the CPU
+			package. Returns Tcontrol, the temperature at which
+			the critical condition clears.
 
 temp3_label		"Tcontrol"
 temp3_input		Provides current Tcontrol temperature of the CPU
diff --git linux-libre-6.18-gnu/Documentation/mm/hugetlbfs_reserv.rst linux-libre-6.18.44-gnu/Documentation/mm/hugetlbfs_reserv.rst
index 4914fbf07966c..a49115db18c76 100644
--- linux-libre-6.18-gnu/Documentation/mm/hugetlbfs_reserv.rst
+++ linux-libre-6.18.44-gnu/Documentation/mm/hugetlbfs_reserv.rst
@@ -155,7 +155,7 @@ are enough free huge pages to accommodate the reservation.  If there are,
 the global reservation count resv_huge_pages is adjusted something like the
 following::
 
-	if (resv_needed <= (resv_huge_pages - free_huge_pages))
+	if (resv_needed <= (free_huge_pages - resv_huge_pages)
 		resv_huge_pages += resv_needed;
 
 Note that the global lock hugetlb_lock is held when checking and adjusting
diff --git linux-libre-6.18-gnu/Documentation/netlink/genetlink-c.yaml linux-libre-6.18.44-gnu/Documentation/netlink/genetlink-c.yaml
index 5a234e9b5fa2e..75fc40bd359ac 100644
--- linux-libre-6.18-gnu/Documentation/netlink/genetlink-c.yaml
+++ linux-libre-6.18.44-gnu/Documentation/netlink/genetlink-c.yaml
@@ -69,6 +69,15 @@ properties:
         header:
           description: For C-compatible languages, header which already defines this value.
           type: string
+        scope:
+          description: |
+            Visibility of this definition. "uapi" (default) renders into
+            the uAPI header, "kernel" renders into the kernel-side
+            generated header, "user" renders into the user-side
+            generated header. When combined with `header:`, the
+            definition is not rendered, and the named header is
+            included only by code matching the scope.
+          enum: [ uapi, kernel, user ]
         type:
           enum: [ const, enum, flags ]
         doc:
diff --git linux-libre-6.18-gnu/Documentation/netlink/genetlink-legacy.yaml linux-libre-6.18.44-gnu/Documentation/netlink/genetlink-legacy.yaml
index 66fb8653a3442..f9c44747729ae 100644
--- linux-libre-6.18-gnu/Documentation/netlink/genetlink-legacy.yaml
+++ linux-libre-6.18.44-gnu/Documentation/netlink/genetlink-legacy.yaml
@@ -83,6 +83,15 @@ properties:
         header:
           description: For C-compatible languages, header which already defines this value.
           type: string
+        scope:
+          description: |
+            Visibility of this definition. "uapi" (default) renders into
+            the uAPI header, "kernel" renders into the kernel-side
+            generated header, "user" renders into the user-side
+            generated header. When combined with `header:`, the
+            definition is not rendered, and the named header is
+            included only by code matching the scope.
+          enum: [ uapi, kernel, user ]
         type:
           enum: [ const, enum, flags, struct ] # Trim
         doc:
diff --git linux-libre-6.18-gnu/Documentation/netlink/genetlink.yaml linux-libre-6.18.44-gnu/Documentation/netlink/genetlink.yaml
index 7b1ec153e8349..825d0e7e1dddc 100644
--- linux-libre-6.18-gnu/Documentation/netlink/genetlink.yaml
+++ linux-libre-6.18.44-gnu/Documentation/netlink/genetlink.yaml
@@ -55,6 +55,15 @@ properties:
         header:
           description: For C-compatible languages, header which already defines this value.
           type: string
+        scope:
+          description: |
+            Visibility of this definition. "uapi" (default) renders into
+            the uAPI header, "kernel" renders into the kernel-side
+            generated header, "user" renders into the user-side
+            generated header. When combined with `header:`, the
+            definition is not rendered, and the named header is
+            included only by code matching the scope.
+          enum: [ uapi, kernel, user ]
         type:
           enum: [ const, enum, flags ]
         doc:
diff --git linux-libre-6.18-gnu/Documentation/netlink/netlink-raw.yaml linux-libre-6.18.44-gnu/Documentation/netlink/netlink-raw.yaml
index 246fa07bccf68..f7c905c999365 100644
--- linux-libre-6.18-gnu/Documentation/netlink/netlink-raw.yaml
+++ linux-libre-6.18.44-gnu/Documentation/netlink/netlink-raw.yaml
@@ -81,6 +81,15 @@ properties:
         header:
           description: For C-compatible languages, header which already defines this value.
           type: string
+        scope:
+          description: |
+            Visibility of this definition. "uapi" (default) renders into
+            the uAPI header, "kernel" renders into the kernel-side
+            generated header, "user" renders into the user-side
+            generated header. When combined with `header:`, the
+            definition is not rendered, and the named header is
+            included only by code matching the scope.
+          enum: [ uapi, kernel, user ]
         type:
           enum: [ const, enum, flags, struct ] # Trim
         doc:
diff --git linux-libre-6.18-gnu/Documentation/netlink/specs/dpll.yaml linux-libre-6.18.44-gnu/Documentation/netlink/specs/dpll.yaml
index 80728f6f9bc87..78d0724d7e12c 100644
--- linux-libre-6.18-gnu/Documentation/netlink/specs/dpll.yaml
+++ linux-libre-6.18.44-gnu/Documentation/netlink/specs/dpll.yaml
@@ -440,6 +440,12 @@ attribute-sets:
         doc: |
           Capable pin provides list of pins that can be bound to create a
           reference-sync pin pair.
+      -
+        name: phase-adjust-gran
+        type: u32
+        doc: |
+          Granularity of phase adjustment, in picoseconds. The value of
+          phase adjustment must be a multiple of this granularity.
 
   -
     name: pin-parent-device
@@ -616,6 +622,7 @@ operations:
             - capabilities
             - parent-device
             - parent-pin
+            - phase-adjust-gran
             - phase-adjust-min
             - phase-adjust-max
             - phase-adjust
diff --git linux-libre-6.18-gnu/Documentation/netlink/specs/fou.yaml linux-libre-6.18.44-gnu/Documentation/netlink/specs/fou.yaml
index 8e7974ec453fc..331f1b342b3ad 100644
--- linux-libre-6.18-gnu/Documentation/netlink/specs/fou.yaml
+++ linux-libre-6.18.44-gnu/Documentation/netlink/specs/fou.yaml
@@ -39,6 +39,8 @@ attribute-sets:
       -
         name: ipproto
         type: u8
+        checks:
+          min: 1
       -
         name: type
         type: u8
diff --git linux-libre-6.18-gnu/Documentation/netlink/specs/handshake.yaml linux-libre-6.18.44-gnu/Documentation/netlink/specs/handshake.yaml
index 95c3fade7a8d7..ffec12b467597 100644
--- linux-libre-6.18-gnu/Documentation/netlink/specs/handshake.yaml
+++ linux-libre-6.18.44-gnu/Documentation/netlink/specs/handshake.yaml
@@ -12,6 +12,12 @@ protocol: genetlink
 doc: Netlink protocol to request a transport layer security handshake.
 
 definitions:
+  -
+    type: const
+    name: max-errno
+    value: 4095
+    header: linux/err.h
+    scope: kernel
   -
     type: enum
     name: handler-class
@@ -80,6 +86,8 @@ attribute-sets:
       -
         name: status
         type: u32
+        checks:
+          max: max-errno
       -
         name: sockfd
         type: s32
@@ -117,6 +125,7 @@ operations:
       name: done
       doc: Handler reports handshake completion
       attribute-set: done
+      flags: [admin-perm]
       do:
         request:
           attributes:
diff --git linux-libre-6.18-gnu/Documentation/netlink/specs/net_shaper.yaml linux-libre-6.18.44-gnu/Documentation/netlink/specs/net_shaper.yaml
index 0b1b54be48f92..3f2ad772b64b1 100644
--- linux-libre-6.18-gnu/Documentation/netlink/specs/net_shaper.yaml
+++ linux-libre-6.18.44-gnu/Documentation/netlink/specs/net_shaper.yaml
@@ -247,8 +247,8 @@ operations:
       flags: [admin-perm]
 
       do:
-        pre: net-shaper-nl-pre-doit
-        post: net-shaper-nl-post-doit
+        pre: net-shaper-nl-pre-doit-write
+        post: net-shaper-nl-post-doit-write
         request:
           attributes:
             - ifindex
@@ -278,8 +278,8 @@ operations:
       flags: [admin-perm]
 
       do:
-        pre: net-shaper-nl-pre-doit
-        post: net-shaper-nl-post-doit
+        pre: net-shaper-nl-pre-doit-write
+        post: net-shaper-nl-post-doit-write
         request:
           attributes: *ns-binding
 
@@ -309,8 +309,8 @@ operations:
       flags: [admin-perm]
 
       do:
-        pre: net-shaper-nl-pre-doit
-        post: net-shaper-nl-post-doit
+        pre: net-shaper-nl-pre-doit-write
+        post: net-shaper-nl-post-doit-write
         request:
           attributes:
             - ifindex
diff --git linux-libre-6.18-gnu/Documentation/netlink/specs/psp.yaml linux-libre-6.18.44-gnu/Documentation/netlink/specs/psp.yaml
index 944429e5c9a84..d41ea6155e52e 100644
--- linux-libre-6.18-gnu/Documentation/netlink/specs/psp.yaml
+++ linux-libre-6.18.44-gnu/Documentation/netlink/specs/psp.yaml
@@ -111,6 +111,7 @@ operations:
       name: dev-set
       doc: Set the configuration of a PSP device.
       attribute-set: dev
+      flags: [admin-perm]
       do:
         request:
           attributes:
@@ -130,6 +131,7 @@ operations:
       name: key-rotate
       doc: Rotate the device key.
       attribute-set: dev
+      flags: [admin-perm]
       do:
         request:
           attributes:
diff --git linux-libre-6.18-gnu/Documentation/netlink/specs/rt-link.yaml linux-libre-6.18.44-gnu/Documentation/netlink/specs/rt-link.yaml
index 2a23e9699c0b6..692b3cd47c310 100644
--- linux-libre-6.18-gnu/Documentation/netlink/specs/rt-link.yaml
+++ linux-libre-6.18.44-gnu/Documentation/netlink/specs/rt-link.yaml
@@ -1336,6 +1336,12 @@ attribute-sets:
       -
         name: coupled-control
         type: u8
+      -
+        name: broadcast-neigh
+        type: u8
+      -
+        name: lacp-strict
+        type: u8
   -
     name: bond-ad-info-attrs
     name-prefix: ifla-bond-ad-info-
@@ -1558,31 +1564,31 @@ attribute-sets:
         type: u32
       -
         name: mode
-        type: flag
+        type: u8
       -
         name: guard
-        type: flag
+        type: u8
       -
         name: protect
-        type: flag
+        type: u8
       -
         name: fast-leave
-        type: flag
+        type: u8
       -
         name: learning
-        type: flag
+        type: u8
       -
         name: unicast-flood
-        type: flag
+        type: u8
       -
         name: proxyarp
-        type: flag
+        type: u8
       -
         name: learning-sync
-        type: flag
+        type: u8
       -
         name: proxyarp-wifi
-        type: flag
+        type: u8
       -
         name: root-id
         type: binary
@@ -1629,34 +1635,34 @@ attribute-sets:
         type: pad
       -
         name: mcast-flood
-        type: flag
+        type: u8
       -
         name: mcast-to-ucast
-        type: flag
+        type: u8
       -
         name: vlan-tunnel
-        type: flag
+        type: u8
       -
         name: bcast-flood
-        type: flag
+        type: u8
       -
         name: group-fwd-mask
         type: u16
       -
         name: neigh-suppress
-        type: flag
+        type: u8
       -
         name: isolated
-        type: flag
+        type: u8
       -
         name: backup-port
         type: u32
       -
         name: mrp-ring-open
-        type: flag
+        type: u8
       -
         name: mrp-in-open
-        type: flag
+        type: u8
       -
         name: mcast-eht-hosts-limit
         type: u32
@@ -1665,10 +1671,10 @@ attribute-sets:
         type: u32
       -
         name: locked
-        type: flag
+        type: u8
       -
         name: mab
-        type: flag
+        type: u8
       -
         name: mcast-n-groups
         type: u32
@@ -1677,7 +1683,7 @@ attribute-sets:
         type: u32
       -
         name: neigh-vlan-suppress
-        type: flag
+        type: u8
       -
         name: backup-nhid
         type: u32
diff --git linux-libre-6.18-gnu/Documentation/networking/bonding.rst linux-libre-6.18.44-gnu/Documentation/networking/bonding.rst
index e700bf1d095c3..33ca5afafdf6d 100644
--- linux-libre-6.18-gnu/Documentation/networking/bonding.rst
+++ linux-libre-6.18.44-gnu/Documentation/networking/bonding.rst
@@ -619,6 +619,29 @@ min_links
 	aggregator cannot be active without at least one available link,
 	setting this option to 0 or to 1 has the exact same effect.
 
+lacp_strict
+
+	Specifies the fallback behavior of a bonding when LACP negotiation
+	fails on all slave links, i.e. when no slave is in the
+	Collecting_Distributing state, while at least `min_links` link still
+	reports carrier up.
+
+	This option is only applicable to 802.3ad mode (mode 4).
+
+	Valid values are:
+
+	off or 0
+		One interface of the bond is selected to be active, in order to
+		facilitate communication with peer devices that do not implement
+		LACP.
+
+	on or 1
+		Interfaces are only permitted to be made active if they have an
+		active LACP partner and have successfully reached
+		Collecting_Distributing state.
+
+	The default value is 0 (off).
+
 mode
 
 	Specifies one of the bonding policies. The default is
diff --git linux-libre-6.18-gnu/Documentation/networking/ip-sysctl.rst linux-libre-6.18.44-gnu/Documentation/networking/ip-sysctl.rst
index a06cb99d66dcd..7a637e87005fe 100644
--- linux-libre-6.18-gnu/Documentation/networking/ip-sysctl.rst
+++ linux-libre-6.18.44-gnu/Documentation/networking/ip-sysctl.rst
@@ -3195,12 +3195,13 @@ enhanced_dad - BOOLEAN
 ===========
 
 ratelimit - INTEGER
-	Limit the maximal rates for sending ICMPv6 messages.
+	Limit the maximal rates for sending ICMPv6 messages to a particular
+	peer.
 
 	0 to disable any limiting,
-	otherwise the minimal space between responses in milliseconds.
+	otherwise the space between responses in milliseconds.
 
-	Default: 1000
+	Default: 100
 
 ratemask - list of comma separated ranges
 	For ICMPv6 message types matching the ranges in the ratemask, limit
diff --git linux-libre-6.18-gnu/Documentation/networking/net_cachelines/inet_sock.rst linux-libre-6.18.44-gnu/Documentation/networking/net_cachelines/inet_sock.rst
index b11bf48fa2b36..4c72a28a7012e 100644
--- linux-libre-6.18-gnu/Documentation/networking/net_cachelines/inet_sock.rst
+++ linux-libre-6.18.44-gnu/Documentation/networking/net_cachelines/inet_sock.rst
@@ -5,42 +5,43 @@
 inet_sock struct fast path usage breakdown
 ==========================================
 
-======================= ===================== =================== =================== ======================================================================================================
-Type                    Name                  fastpath_tx_access  fastpath_rx_access  comment
-======================= ===================== =================== =================== ======================================================================================================
-struct sock             sk                    read_mostly         read_mostly         tcp_init_buffer_space,tcp_init_transfer,tcp_finish_connect,tcp_connect,tcp_send_rcvq,tcp_send_syn_data
-struct ipv6_pinfo*      pinet6
-be16                    inet_sport            read_mostly                             __tcp_transmit_skb
-be32                    inet_daddr            read_mostly                             ip_select_ident_segs
-be32                    inet_rcv_saddr
-be16                    inet_dport            read_mostly                             __tcp_transmit_skb
-u16                     inet_num
-be32                    inet_saddr
-s16                     uc_ttl                read_mostly                             __ip_queue_xmit/ip_select_ttl
-u16                     cmsg_flags
-struct ip_options_rcu*  inet_opt              read_mostly                             __ip_queue_xmit
-u16                     inet_id               read_mostly                             ip_select_ident_segs
-u8                      tos                   read_mostly                             ip_queue_xmit
-u8                      min_ttl
-u8                      mc_ttl
-u8                      pmtudisc
-u8:1                    recverr
-u8:1                    is_icsk
-u8:1                    freebind
-u8:1                    hdrincl
-u8:1                    mc_loop
-u8:1                    transparent
-u8:1                    mc_all
-u8:1                    nodefrag
-u8:1                    bind_address_no_port
-u8:1                    recverr_rfc4884
-u8:1                    defer_connect         read_mostly                             tcp_sendmsg_fastopen
-u8                      rcv_tos
-u8                      convert_csum
-int                     uc_index
-int                     mc_index
-be32                    mc_addr
-struct ip_mc_socklist*  mc_list
-struct inet_cork_full   cork                  read_mostly                             __tcp_transmit_skb
-struct                  local_port_range
-======================= ===================== =================== =================== ======================================================================================================
+======================== ===================== =================== =================== ======================================================================================================
+Type                     Name                  fastpath_tx_access  fastpath_rx_access  comment
+======================== ===================== =================== =================== ======================================================================================================
+struct sock              sk                    read_mostly         read_mostly         tcp_init_buffer_space,tcp_init_transfer,tcp_finish_connect,tcp_connect,tcp_send_rcvq,tcp_send_syn_data
+struct ipv6_pinfo*       pinet6
+struct ipv6_fl_socklist* ipv6_fl_list          read_mostly                             tcp_v6_connect,__ip6_datagram_connect,udpv6_sendmsg,rawv6_sendmsg
+be16                     inet_sport            read_mostly                             __tcp_transmit_skb
+be32                     inet_daddr            read_mostly                             ip_select_ident_segs
+be32                     inet_rcv_saddr
+be16                     inet_dport            read_mostly                             __tcp_transmit_skb
+u16                      inet_num
+be32                     inet_saddr
+s16                      uc_ttl                read_mostly                             __ip_queue_xmit/ip_select_ttl
+u16                      cmsg_flags
+struct ip_options_rcu*   inet_opt              read_mostly                             __ip_queue_xmit
+u16                      inet_id               read_mostly                             ip_select_ident_segs
+u8                       tos                   read_mostly                             ip_queue_xmit
+u8                       min_ttl
+u8                       mc_ttl
+u8                       pmtudisc
+u8:1                     recverr
+u8:1                     is_icsk
+u8:1                     freebind
+u8:1                     hdrincl
+u8:1                     mc_loop
+u8:1                     transparent
+u8:1                     mc_all
+u8:1                     nodefrag
+u8:1                     bind_address_no_port
+u8:1                     recverr_rfc4884
+u8:1                     defer_connect         read_mostly                             tcp_sendmsg_fastopen
+u8                       rcv_tos
+u8                       convert_csum
+int                      uc_index
+int                      mc_index
+be32                     mc_addr
+struct ip_mc_socklist*   mc_list
+struct inet_cork_full    cork                  read_mostly                             __tcp_transmit_skb
+struct                   local_port_range
+======================== ===================== =================== =================== ======================================================================================================
diff --git linux-libre-6.18-gnu/Documentation/process/2.Process.rst linux-libre-6.18.44-gnu/Documentation/process/2.Process.rst
index ef3b116492df0..f4fc0da8999d9 100644
--- linux-libre-6.18-gnu/Documentation/process/2.Process.rst
+++ linux-libre-6.18.44-gnu/Documentation/process/2.Process.rst
@@ -104,8 +104,10 @@ kernels go out with a handful of known regressions though, hopefully, none
 of them are serious.
 
 Once a stable release is made, its ongoing maintenance is passed off to the
-"stable team," currently Greg Kroah-Hartman. The stable team will release
-occasional updates to the stable release using the 5.x.y numbering scheme.
+"stable team," currently consists of Greg Kroah-Hartman and Sasha Levin. The
+stable team will release occasional updates to the stable release using the
+5.x.y numbering scheme.
+
 To be considered for an update release, a patch must (1) fix a significant
 bug, and (2) already be merged into the mainline for the next development
 kernel. Kernels will typically receive stable updates for a little more
diff --git linux-libre-6.18-gnu/Documentation/process/deprecated.rst linux-libre-6.18.44-gnu/Documentation/process/deprecated.rst
index 1f7f3e6c9cda9..fed56864d0363 100644
--- linux-libre-6.18-gnu/Documentation/process/deprecated.rst
+++ linux-libre-6.18.44-gnu/Documentation/process/deprecated.rst
@@ -372,3 +372,34 @@ The helper must be used::
 			DECLARE_FLEX_ARRAY(struct type2, two);
 		};
 	};
+
+Open-coded kmalloc assignments for struct objects
+-------------------------------------------------
+Performing open-coded kmalloc()-family allocation assignments prevents
+the kernel (and compiler) from being able to examine the type of the
+variable being assigned, which limits any related introspection that
+may help with alignment, wrap-around, or additional hardening. The
+kmalloc_obj()-family of macros provide this introspection, which can be
+used for the common code patterns for single, array, and flexible object
+allocations. For example, these open coded assignments::
+
+	ptr = kmalloc(sizeof(*ptr), gfp);
+	ptr = kzalloc(sizeof(*ptr), gfp);
+	ptr = kmalloc_array(count, sizeof(*ptr), gfp);
+	ptr = kcalloc(count, sizeof(*ptr), gfp);
+	ptr = kmalloc(struct_size(ptr, flex_member, count), gfp);
+	ptr = kmalloc(sizeof(struct foo, gfp);
+
+become, respectively::
+
+	ptr = kmalloc_obj(*ptr, gfp);
+	ptr = kzalloc_obj(*ptr, gfp);
+	ptr = kmalloc_objs(*ptr, count, gfp);
+	ptr = kzalloc_objs(*ptr, count, gfp);
+	ptr = kmalloc_flex(*ptr, flex_member, count, gfp);
+	__auto_type ptr = kmalloc_obj(struct foo, gfp);
+
+If `ptr->flex_member` is annotated with __counted_by(), the allocation
+will automatically fail if `count` is larger than the maximum
+representable value that can be stored in the counter member associated
+with `flex_member`.
diff --git linux-libre-6.18-gnu/Documentation/scheduler/sched-ext.rst linux-libre-6.18.44-gnu/Documentation/scheduler/sched-ext.rst
index 404fe6126a769..a72461b1c9305 100644
--- linux-libre-6.18-gnu/Documentation/scheduler/sched-ext.rst
+++ linux-libre-6.18.44-gnu/Documentation/scheduler/sched-ext.rst
@@ -321,13 +321,15 @@ by a sched_ext scheduler:
                 ops.dispatch(); /* Task is moved to a local DSQ */
             }
             ops.running();      /* Task starts running on its assigned CPU */
-            while (task->scx.slice > 0 && task is runnable)
-                ops.tick();     /* Called every 1/HZ seconds */
-            ops.stopping();     /* Task stops running (time slice expires or wait) */
 
-            /* Task's CPU becomes available */
+            while task_is_runnable(p) {
+                while (task->scx.slice > 0 && task_is_runnable(p))
+                    ops.tick();     /* Called every 1/HZ seconds */
+
+                ops.dispatch();     /* task->scx.slice can be refilled */
+            }
 
-            ops.dispatch();     /* task->scx.slice can be refilled */
+            ops.stopping();     /* Task stops running (time slice expires or wait) */
         }
 
         ops.quiescent();        /* Task releases its assigned CPU (wait) */
diff --git linux-libre-6.18-gnu/Documentation/sound/alsa-configuration.rst linux-libre-6.18.44-gnu/Documentation/sound/alsa-configuration.rst
index e4eed3d0e62b8..ffaf0d22cd1cc 100644
--- linux-libre-6.18-gnu/Documentation/sound/alsa-configuration.rst
+++ linux-libre-6.18.44-gnu/Documentation/sound/alsa-configuration.rst
@@ -2372,6 +2372,10 @@ quirk_flags
           audible volume
         * bit 25: ``mixer_capture_min_mute``
           Similar to bit 24 but for capture streams
+        * bit 26: ``skip_iface_setup``
+          Skip the probe-time interface setup (usb_set_interface,
+          init_pitch, init_sample_rate); redundant with
+          snd_usb_endpoint_prepare() at stream-open time
 
 This module supports multiple devices, autoprobe and hotplugging.
 
diff --git linux-libre-6.18-gnu/Documentation/tools/rtla/common_appendix.rst linux-libre-6.18.44-gnu/Documentation/tools/rtla/common_appendix.txt
similarity index 100%
rename from Documentation/tools/rtla/common_appendix.rst
rename to Documentation/tools/rtla/common_appendix.txt
diff --git linux-libre-6.18-gnu/Documentation/tools/rtla/common_hist_options.rst linux-libre-6.18.44-gnu/Documentation/tools/rtla/common_hist_options.txt
similarity index 100%
rename from Documentation/tools/rtla/common_hist_options.rst
rename to Documentation/tools/rtla/common_hist_options.txt
diff --git linux-libre-6.18-gnu/Documentation/tools/rtla/common_options.rst linux-libre-6.18.44-gnu/Documentation/tools/rtla/common_options.txt
similarity index 99%
rename from Documentation/tools/rtla/common_options.rst
rename to Documentation/tools/rtla/common_options.txt
index 77ef35d3f8317..edc8e850f5d01 100644
--- linux-libre-6.18-gnu/Documentation/tools/rtla/common_options.rst
+++ linux-libre-6.18.44-gnu/Documentation/tools/rtla/common_options.txt
@@ -42,7 +42,7 @@
         - *f:prio* - use SCHED_FIFO with *prio*;
         - *d:runtime[us|ms|s]:period[us|ms|s]* - use SCHED_DEADLINE with *runtime* and *period* in nanoseconds.
 
-**-C**, **--cgroup**\[*=cgroup*]
+**-C**, **--cgroup** \[*cgroup*]
 
         Set a *cgroup* to the tracer's threads. If the **-C** option is passed without arguments, the tracer's thread will inherit **rtla**'s *cgroup*. Otherwise, the threads will be placed on the *cgroup* passed to the option.
 
diff --git linux-libre-6.18-gnu/Documentation/tools/rtla/common_osnoise_description.rst linux-libre-6.18.44-gnu/Documentation/tools/rtla/common_osnoise_description.txt
similarity index 100%
rename from Documentation/tools/rtla/common_osnoise_description.rst
rename to Documentation/tools/rtla/common_osnoise_description.txt
diff --git linux-libre-6.18-gnu/Documentation/tools/rtla/common_osnoise_options.rst linux-libre-6.18.44-gnu/Documentation/tools/rtla/common_osnoise_options.txt
similarity index 100%
rename from Documentation/tools/rtla/common_osnoise_options.rst
rename to Documentation/tools/rtla/common_osnoise_options.txt
diff --git linux-libre-6.18-gnu/Documentation/tools/rtla/common_timerlat_aa.rst linux-libre-6.18.44-gnu/Documentation/tools/rtla/common_timerlat_aa.txt
similarity index 100%
rename from Documentation/tools/rtla/common_timerlat_aa.rst
rename to Documentation/tools/rtla/common_timerlat_aa.txt
diff --git linux-libre-6.18-gnu/Documentation/tools/rtla/common_timerlat_description.rst linux-libre-6.18.44-gnu/Documentation/tools/rtla/common_timerlat_description.txt
similarity index 100%
rename from Documentation/tools/rtla/common_timerlat_description.rst
rename to Documentation/tools/rtla/common_timerlat_description.txt
diff --git linux-libre-6.18-gnu/Documentation/tools/rtla/common_timerlat_options.rst linux-libre-6.18.44-gnu/Documentation/tools/rtla/common_timerlat_options.txt
similarity index 100%
rename from Documentation/tools/rtla/common_timerlat_options.rst
rename to Documentation/tools/rtla/common_timerlat_options.txt
diff --git linux-libre-6.18-gnu/Documentation/tools/rtla/common_top_options.rst linux-libre-6.18.44-gnu/Documentation/tools/rtla/common_top_options.txt
similarity index 100%
rename from Documentation/tools/rtla/common_top_options.rst
rename to Documentation/tools/rtla/common_top_options.txt
diff --git linux-libre-6.18-gnu/Documentation/tools/rtla/rtla-hwnoise.rst linux-libre-6.18.44-gnu/Documentation/tools/rtla/rtla-hwnoise.rst
index 3a7163c02ac8e..26512b15fe7ba 100644
--- linux-libre-6.18-gnu/Documentation/tools/rtla/rtla-hwnoise.rst
+++ linux-libre-6.18.44-gnu/Documentation/tools/rtla/rtla-hwnoise.rst
@@ -29,11 +29,11 @@ collection of the tracer output.
 
 OPTIONS
 =======
-.. include:: common_osnoise_options.rst
+.. include:: common_osnoise_options.txt
 
-.. include:: common_top_options.rst
+.. include:: common_top_options.txt
 
-.. include:: common_options.rst
+.. include:: common_options.txt
 
 EXAMPLE
 =======
@@ -106,4 +106,4 @@ AUTHOR
 ======
 Written by Daniel Bristot de Oliveira <bristot@kernel.org>
 
-.. include:: common_appendix.rst
+.. include:: common_appendix.txt
diff --git linux-libre-6.18-gnu/Documentation/tools/rtla/rtla-osnoise-hist.rst linux-libre-6.18.44-gnu/Documentation/tools/rtla/rtla-osnoise-hist.rst
index 1fc60ef261067..007521c865d97 100644
--- linux-libre-6.18-gnu/Documentation/tools/rtla/rtla-osnoise-hist.rst
+++ linux-libre-6.18.44-gnu/Documentation/tools/rtla/rtla-osnoise-hist.rst
@@ -15,7 +15,7 @@ SYNOPSIS
 
 DESCRIPTION
 ===========
-.. include:: common_osnoise_description.rst
+.. include:: common_osnoise_description.txt
 
 The **rtla osnoise hist** tool collects all **osnoise:sample_threshold**
 occurrence in a histogram, displaying the results in a user-friendly way.
@@ -24,11 +24,11 @@ collection of the tracer output.
 
 OPTIONS
 =======
-.. include:: common_osnoise_options.rst
+.. include:: common_osnoise_options.txt
 
-.. include:: common_hist_options.rst
+.. include:: common_hist_options.txt
 
-.. include:: common_options.rst
+.. include:: common_options.txt
 
 EXAMPLE
 =======
@@ -65,4 +65,4 @@ AUTHOR
 ======
 Written by Daniel Bristot de Oliveira <bristot@kernel.org>
 
-.. include:: common_appendix.rst
+.. include:: common_appendix.txt
diff --git linux-libre-6.18-gnu/Documentation/tools/rtla/rtla-osnoise-top.rst linux-libre-6.18.44-gnu/Documentation/tools/rtla/rtla-osnoise-top.rst
index b1cbd7bcd4aed..6ccadae389457 100644
--- linux-libre-6.18-gnu/Documentation/tools/rtla/rtla-osnoise-top.rst
+++ linux-libre-6.18.44-gnu/Documentation/tools/rtla/rtla-osnoise-top.rst
@@ -15,7 +15,7 @@ SYNOPSIS
 
 DESCRIPTION
 ===========
-.. include:: common_osnoise_description.rst
+.. include:: common_osnoise_description.txt
 
 **rtla osnoise top** collects the periodic summary from the *osnoise* tracer,
 including the counters of the occurrence of the interference source,
@@ -26,11 +26,11 @@ collection of the tracer output.
 
 OPTIONS
 =======
-.. include:: common_osnoise_options.rst
+.. include:: common_osnoise_options.txt
 
-.. include:: common_top_options.rst
+.. include:: common_top_options.txt
 
-.. include:: common_options.rst
+.. include:: common_options.txt
 
 EXAMPLE
 =======
@@ -60,4 +60,4 @@ AUTHOR
 ======
 Written by Daniel Bristot de Oliveira <bristot@kernel.org>
 
-.. include:: common_appendix.rst
+.. include:: common_appendix.txt
diff --git linux-libre-6.18-gnu/Documentation/tools/rtla/rtla-osnoise.rst linux-libre-6.18.44-gnu/Documentation/tools/rtla/rtla-osnoise.rst
index c129b206ce348..540d2bf6c1524 100644
--- linux-libre-6.18-gnu/Documentation/tools/rtla/rtla-osnoise.rst
+++ linux-libre-6.18.44-gnu/Documentation/tools/rtla/rtla-osnoise.rst
@@ -14,7 +14,7 @@ SYNOPSIS
 DESCRIPTION
 ===========
 
-.. include:: common_osnoise_description.rst
+.. include:: common_osnoise_description.txt
 
 The *osnoise* tracer outputs information in two ways. It periodically prints
 a summary of the noise of the operating system, including the counters of
@@ -56,4 +56,4 @@ AUTHOR
 ======
 Written by Daniel Bristot de Oliveira <bristot@kernel.org>
 
-.. include:: common_appendix.rst
+.. include:: common_appendix.txt
diff --git linux-libre-6.18-gnu/Documentation/tools/rtla/rtla-timerlat-hist.rst linux-libre-6.18.44-gnu/Documentation/tools/rtla/rtla-timerlat-hist.rst
index 4923a362129bb..f56fe546411bd 100644
--- linux-libre-6.18-gnu/Documentation/tools/rtla/rtla-timerlat-hist.rst
+++ linux-libre-6.18.44-gnu/Documentation/tools/rtla/rtla-timerlat-hist.rst
@@ -16,7 +16,7 @@ SYNOPSIS
 DESCRIPTION
 ===========
 
-.. include:: common_timerlat_description.rst
+.. include:: common_timerlat_description.txt
 
 The **rtla timerlat hist** displays a histogram of each tracer event
 occurrence. This tool uses the periodic information, and the
@@ -25,13 +25,13 @@ occurrence. This tool uses the periodic information, and the
 OPTIONS
 =======
 
-.. include:: common_timerlat_options.rst
+.. include:: common_timerlat_options.txt
 
-.. include:: common_hist_options.rst
+.. include:: common_hist_options.txt
 
-.. include:: common_options.rst
+.. include:: common_options.txt
 
-.. include:: common_timerlat_aa.rst
+.. include:: common_timerlat_aa.txt
 
 EXAMPLE
 =======
@@ -110,4 +110,4 @@ AUTHOR
 ======
 Written by Daniel Bristot de Oliveira <bristot@kernel.org>
 
-.. include:: common_appendix.rst
+.. include:: common_appendix.txt
diff --git linux-libre-6.18-gnu/Documentation/tools/rtla/rtla-timerlat-top.rst linux-libre-6.18.44-gnu/Documentation/tools/rtla/rtla-timerlat-top.rst
index 50968cdd2095a..7dbe625d0c424 100644
--- linux-libre-6.18-gnu/Documentation/tools/rtla/rtla-timerlat-top.rst
+++ linux-libre-6.18.44-gnu/Documentation/tools/rtla/rtla-timerlat-top.rst
@@ -16,7 +16,7 @@ SYNOPSIS
 DESCRIPTION
 ===========
 
-.. include:: common_timerlat_description.rst
+.. include:: common_timerlat_description.txt
 
 The **rtla timerlat top** displays a summary of the periodic output
 from the *timerlat* tracer. It also provides information for each
@@ -26,13 +26,13 @@ seem with the option **-T**.
 OPTIONS
 =======
 
-.. include:: common_timerlat_options.rst
+.. include:: common_timerlat_options.txt
 
-.. include:: common_top_options.rst
+.. include:: common_top_options.txt
 
-.. include:: common_options.rst
+.. include:: common_options.txt
 
-.. include:: common_timerlat_aa.rst
+.. include:: common_timerlat_aa.txt
 
 **--aa-only** *us*
 
@@ -133,4 +133,4 @@ AUTHOR
 ------
 Written by Daniel Bristot de Oliveira <bristot@kernel.org>
 
-.. include:: common_appendix.rst
+.. include:: common_appendix.txt
diff --git linux-libre-6.18-gnu/Documentation/tools/rtla/rtla-timerlat.rst linux-libre-6.18.44-gnu/Documentation/tools/rtla/rtla-timerlat.rst
index 20e2d259467fd..ce9f57e038c37 100644
--- linux-libre-6.18-gnu/Documentation/tools/rtla/rtla-timerlat.rst
+++ linux-libre-6.18.44-gnu/Documentation/tools/rtla/rtla-timerlat.rst
@@ -14,7 +14,7 @@ SYNOPSIS
 DESCRIPTION
 ===========
 
-.. include:: common_timerlat_description.rst
+.. include:: common_timerlat_description.txt
 
 The **rtla timerlat top** mode displays a summary of the periodic output
 from the *timerlat* tracer. The **rtla timerlat hist** mode displays
@@ -51,4 +51,4 @@ AUTHOR
 ======
 Written by Daniel Bristot de Oliveira <bristot@kernel.org>
 
-.. include:: common_appendix.rst
+.. include:: common_appendix.txt
diff --git linux-libre-6.18-gnu/Documentation/tools/rtla/rtla.rst linux-libre-6.18.44-gnu/Documentation/tools/rtla/rtla.rst
index fc0d233efcd5d..2a5fb7004ad44 100644
--- linux-libre-6.18-gnu/Documentation/tools/rtla/rtla.rst
+++ linux-libre-6.18.44-gnu/Documentation/tools/rtla/rtla.rst
@@ -45,4 +45,4 @@ AUTHOR
 ======
 Daniel Bristot de Oliveira <bristot@kernel.org>
 
-.. include:: common_appendix.rst
+.. include:: common_appendix.txt
diff --git linux-libre-6.18-gnu/Documentation/trace/eprobetrace.rst linux-libre-6.18.44-gnu/Documentation/trace/eprobetrace.rst
index 89b5157cfab86..fe3602540569a 100644
--- linux-libre-6.18-gnu/Documentation/trace/eprobetrace.rst
+++ linux-libre-6.18.44-gnu/Documentation/trace/eprobetrace.rst
@@ -46,6 +46,10 @@ Synopsis of eprobe_events
 		  (x8/x16/x32/x64), VFS layer common type(%pd/%pD), "char",
                   "string", "ustring", "symbol", "symstr" and "bitfield" are
                   supported.
+  (STRUCT)FIELD->MEMBER[->MEMBER] : If BTF is supported, typecast FIELD to
+                  a pointer to STRUCT and then derference the pointer defined by
+                  ->MEMBER. Note that when this is used, the FIELD name does not
+                  need to be prefixed with a '$'.
 
 Types
 -----
diff --git linux-libre-6.18-gnu/Documentation/trace/events-pci.rst linux-libre-6.18.44-gnu/Documentation/trace/events-pci.rst
new file mode 100644
index 0000000000000..03ff4ad30ddfa
--- /dev/null
+++ linux-libre-6.18.44-gnu/Documentation/trace/events-pci.rst
@@ -0,0 +1,74 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===========================
+Subsystem Trace Points: PCI
+===========================
+
+Overview
+========
+The PCI tracing system provides tracepoints to monitor critical hardware events
+that can impact system performance and reliability. These events normally show
+up here:
+
+	/sys/kernel/tracing/events/pci
+
+Cf. include/trace/events/pci.h for the events definitions.
+
+Available Tracepoints
+=====================
+
+pci_hp_event
+------------
+
+Monitors PCI hotplug events including card insertion/removal and link
+state changes.
+::
+
+    pci_hp_event  "%s slot:%s, event:%s\n"
+
+**Event Types**:
+
+* ``LINK_UP`` - PCIe link established
+* ``LINK_DOWN`` - PCIe link lost
+* ``CARD_PRESENT`` - Card detected in slot
+* ``CARD_NOT_PRESENT`` - Card removed from slot
+
+**Example Usage**::
+
+    # Enable the tracepoint
+    echo 1 > /sys/kernel/debug/tracing/events/pci/pci_hp_event/enable
+
+    # Monitor events (the following output is generated when a device is hotplugged)
+    cat /sys/kernel/debug/tracing/trace_pipe
+       irq/51-pciehp-88      [001] .....  1311.177459: pci_hp_event: 0000:00:02.0 slot:10, event:CARD_PRESENT
+
+       irq/51-pciehp-88      [001] .....  1311.177566: pci_hp_event: 0000:00:02.0 slot:10, event:LINK_UP
+
+pcie_link_event
+---------------
+
+Monitors PCIe link speed changes and provides detailed link status information.
+::
+
+    pcie_link_event  "%s type:%d, reason:%d, cur_bus_speed:%d, max_bus_speed:%d, width:%u, flit_mode:%u, status:%s\n"
+
+**Parameters**:
+
+* ``type`` - PCIe device type (4=Root Port, etc.)
+* ``reason`` - Reason for link change:
+
+  - ``0`` - Link retrain
+  - ``1`` - Bus enumeration
+  - ``2`` - Bandwidth notification enable
+  - ``3`` - Bandwidth notification IRQ
+  - ``4`` - Hotplug event
+
+
+**Example Usage**::
+
+    # Enable the tracepoint
+    echo 1 > /sys/kernel/debug/tracing/events/pci/pcie_link_event/enable
+
+    # Monitor events (the following output is generated when a device is hotplugged)
+    cat /sys/kernel/debug/tracing/trace_pipe
+       irq/51-pciehp-88      [001] .....   381.545386: pcie_link_event: 0000:00:02.0 type:4, reason:4, cur_bus_speed:20, max_bus_speed:23, width:1, flit_mode:0, status:DLLLA
diff --git linux-libre-6.18-gnu/Documentation/trace/index.rst linux-libre-6.18.44-gnu/Documentation/trace/index.rst
index b4a429dc4f7ad..0a40bfabcf19b 100644
--- linux-libre-6.18-gnu/Documentation/trace/index.rst
+++ linux-libre-6.18.44-gnu/Documentation/trace/index.rst
@@ -54,6 +54,7 @@ applications.
    events-power
    events-nmi
    events-msr
+   events-pci
    boottime-trace
    histogram
    histogram-design
diff --git linux-libre-6.18-gnu/Documentation/trace/rv/monitor_sched.rst linux-libre-6.18.44-gnu/Documentation/trace/rv/monitor_sched.rst
index 3f8381ad9ec7b..608173574ba76 100644
--- linux-libre-6.18-gnu/Documentation/trace/rv/monitor_sched.rst
+++ linux-libre-6.18.44-gnu/Documentation/trace/rv/monitor_sched.rst
@@ -36,7 +36,7 @@ Specifications
 --------------
 
 The specifications included in sched are currently a work in progress, adapting the ones
-defined in by Daniel Bristot in [1].
+defined by Daniel Bristot in [1]_.
 
 Currently we included the following:
 
@@ -399,4 +399,7 @@ another special case that is currently not supported by the monitor.
 References
 ----------
 
-[1] - https://bristot.me/linux-task-model
+.. [1] Daniel Bristot de Oliveira et al.:
+       `A thread synchronization model for the PREEMPT_RT Linux kernel
+       <https://www.iris.sssup.it/bitstream/11382/533630/1/Elsevier-JSA-2020.pdf>`_,
+       J. Syst. Archit., 2020.
diff --git linux-libre-6.18-gnu/Documentation/userspace-api/ioctl/ioctl-number.rst linux-libre-6.18.44-gnu/Documentation/userspace-api/ioctl/ioctl-number.rst
index 7c527a01d1cf5..d896b9991a4f7 100644
--- linux-libre-6.18-gnu/Documentation/userspace-api/ioctl/ioctl-number.rst
+++ linux-libre-6.18.44-gnu/Documentation/userspace-api/ioctl/ioctl-number.rst
@@ -229,7 +229,6 @@ Code  Seq#    Include File                                             Comments
                                                                        <mailto:gregkh@linuxfoundation.org>
 'a'   all    linux/atm*.h, linux/sonet.h                               ATM on linux
                                                                        <http://lrcwww.epfl.ch/>
-'a'   00-0F  drivers/crypto/qat/qat_common/adf_cfg_common.h            conflict! qat driver
 'b'   00-FF                                                            conflict! bit3 vme host bridge
                                                                        <mailto:natalia@nikhefk.nikhef.nl>
 'b'   00-0F  linux/dma-buf.h                                           conflict!
diff --git linux-libre-6.18-gnu/Documentation/virt/kvm/api.rst linux-libre-6.18.44-gnu/Documentation/virt/kvm/api.rst
index 57061fa29e6a0..10d8a366b2072 100644
--- linux-libre-6.18-gnu/Documentation/virt/kvm/api.rst
+++ linux-libre-6.18.44-gnu/Documentation/virt/kvm/api.rst
@@ -7800,8 +7800,10 @@ Will return -EBUSY if a VCPU has already been created.
 
 Valid feature flags in args[0] are::
 
-  #define KVM_X2APIC_API_USE_32BIT_IDS            (1ULL << 0)
-  #define KVM_X2APIC_API_DISABLE_BROADCAST_QUIRK  (1ULL << 1)
+  #define KVM_X2APIC_API_USE_32BIT_IDS                          (1ULL << 0)
+  #define KVM_X2APIC_API_DISABLE_BROADCAST_QUIRK                (1ULL << 1)
+  #define KVM_X2APIC_ENABLE_SUPPRESS_EOI_BROADCAST              (1ULL << 2)
+  #define KVM_X2APIC_DISABLE_SUPPRESS_EOI_BROADCAST             (1ULL << 3)
 
 Enabling KVM_X2APIC_API_USE_32BIT_IDS changes the behavior of
 KVM_SET_GSI_ROUTING, KVM_SIGNAL_MSI, KVM_SET_LAPIC, and KVM_GET_LAPIC,
@@ -7814,6 +7816,28 @@ as a broadcast even in x2APIC mode in order to support physical x2APIC
 without interrupt remapping.  This is undesirable in logical mode,
 where 0xff represents CPUs 0-7 in cluster 0.
 
+Setting KVM_X2APIC_ENABLE_SUPPRESS_EOI_BROADCAST instructs KVM to enable
+Suppress EOI Broadcasts.  KVM will advertise support for Suppress EOI
+Broadcast to the guest and suppress LAPIC EOI broadcasts when the guest
+sets the Suppress EOI Broadcast bit in the SPIV register.  This flag is
+supported only when using a split IRQCHIP.
+
+Setting KVM_X2APIC_DISABLE_SUPPRESS_EOI_BROADCAST disables support for
+Suppress EOI Broadcasts entirely, i.e. instructs KVM to NOT advertise
+support to the guest.
+
+Modern VMMs should either enable KVM_X2APIC_ENABLE_SUPPRESS_EOI_BROADCAST
+or KVM_X2APIC_DISABLE_SUPPRESS_EOI_BROADCAST.  If not, legacy quirky
+behavior will be used by KVM: in split IRQCHIP mode, KVM will advertise
+support for Suppress EOI Broadcasts but not actually suppress EOI
+broadcasts; for in-kernel IRQCHIP mode, KVM will not advertise support for
+Suppress EOI Broadcasts.
+
+Setting both KVM_X2APIC_ENABLE_SUPPRESS_EOI_BROADCAST and
+KVM_X2APIC_DISABLE_SUPPRESS_EOI_BROADCAST will fail with an EINVAL error,
+as will setting KVM_X2APIC_ENABLE_SUPPRESS_EOI_BROADCAST without a split
+IRCHIP.
+
 7.8 KVM_CAP_S390_USER_INSTR0
 ----------------------------
 
@@ -8235,6 +8259,12 @@ When this capability is enabled all memory in memslots must be mapped as
 attempts to create a memslot with an invalid mmap will result in an
 -EINVAL return.
 
+``guest_memfd``, even though it is an anonymous file, is not supported with MTE.
+Attempting to create a memslot backed by ``guest_memfd`` when the MTE capability
+is enabled, or attempting to enable the MTE capability after
+``guest_memfd``-backed memslots have been created, will result in an -EINVAL
+return.
+
 When enabled the VMM may make use of the ``KVM_ARM_MTE_COPY_TAGS`` ioctl to
 perform a bulk copy of tags to/from the guest.
 
@@ -8379,6 +8409,14 @@ KVM_X86_QUIRK_IGNORE_GUEST_PAT      By default, on Intel platforms, KVM ignores
                                     guest software, for example if it does not
                                     expose a bochs graphics device (which is
                                     known to have had a buggy driver).
+
+KVM_X86_QUIRK_VMCS12_ALLOW_FREEZE_IN_SMM   By default, KVM relaxes the consistency
+                                      check for GUEST_IA32_DEBUGCTL in vmcs12
+                                      to allow FREEZE_IN_SMM to be set.  When
+                                      this quirk is disabled, KVM requires this
+                                      bit to be cleared.  Note that the vmcs02
+                                      bit is still completely controlled by the
+                                      host, regardless of the quirk setting.
 =================================== ============================================
 
 7.32 KVM_CAP_MAX_VCPU_ID
diff --git linux-libre-6.18-gnu/MAINTAINERS linux-libre-6.18.44-gnu/MAINTAINERS
index e8f06145fb54c..d27beeb0d9b8d 100644
--- linux-libre-6.18-gnu/MAINTAINERS
+++ linux-libre-6.18.44-gnu/MAINTAINERS
@@ -8656,6 +8656,19 @@ T:	git https://gitlab.freedesktop.org/drm/misc/kernel.git
 F:	drivers/gpu/drm/ttm/
 F:	include/drm/ttm/
 
+GPU BUDDY ALLOCATOR
+M:	Matthew Auld <matthew.auld@intel.com>
+M:	Arun Pravin <arunpravin.paneerselvam@amd.com>
+R:	Christian Koenig <christian.koenig@amd.com>
+L:	dri-devel@lists.freedesktop.org
+S:	Maintained
+T:	git https://gitlab.freedesktop.org/drm/misc/kernel.git
+F:	drivers/gpu/drm_buddy.c
+F:	drivers/gpu/buddy.c
+F:	drivers/gpu/tests/gpu_buddy_test.c
+F:	include/linux/gpu_buddy.h
+F:	include/drm/drm_buddy.h
+
 DRM AUTOMATED TESTING
 M:	Helen Koike <helen.fornazier@gmail.com>
 M:	Vignesh Raman <vignesh.raman@collabora.com>
@@ -13798,7 +13811,7 @@ S:	Maintained
 F:	Documentation/admin-guide/mm/kho.rst
 F:	Documentation/core-api/kho/*
 F:	include/linux/kexec_handover.h
-F:	kernel/kexec_handover.c
+F:	kernel/kexec_handover*
 F:	lib/test_kho.c
 F:	tools/testing/selftests/kho/
 
@@ -14617,7 +14630,6 @@ M:	Qunqin Zhao <zhaoqunqin@loongson.cn>
 L:	linux-crypto@vger.kernel.org
 S:	Maintained
 F:	drivers/char/tpm/tpm_loongson.c
-F:	drivers/crypto/loongson/
 F:	drivers/mfd/loongson-se.c
 F:	include/linux/mfd/loongson-se.h
 
diff --git linux-libre-6.18-gnu/Makefile linux-libre-6.18.44-gnu/Makefile
index aae15ce33aa7e..277a821a9bca7 100644
--- linux-libre-6.18-gnu/Makefile
+++ linux-libre-6.18.44-gnu/Makefile
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 VERSION = 6
 PATCHLEVEL = 18
-SUBLEVEL = 0
+SUBLEVEL = 44
 EXTRAVERSION = -gnu
 NAME = Baby Opossum Posse
 
@@ -470,9 +470,14 @@ KBUILD_USERLDFLAGS := $(USERLDFLAGS)
 
 # These flags apply to all Rust code in the tree, including the kernel and
 # host programs.
+#
+# `-Aclippy::unwrap_or_default`: the lint is buggy [1] and ignores our
+# MSRV. It can trigger depending on the optimization level.
+# [1] https://github.com/rust-lang/rust-clippy/issues/17379
 export rust_common_flags := --edition=2021 \
 			    -Zbinary_dep_depinfo=y \
 			    -Astable_features \
+			    -Aunused_features \
 			    -Dnon_ascii_idents \
 			    -Dunsafe_op_in_unsafe_fn \
 			    -Wmissing_docs \
@@ -482,6 +487,8 @@ export rust_common_flags := --edition=2021 \
 			    -Wclippy::as_ptr_cast_mut \
 			    -Wclippy::as_underscore \
 			    -Wclippy::cast_lossless \
+			    -Aclippy::collapsible_if \
+			    -Aclippy::collapsible_match \
 			    -Wclippy::ignored_unit_patterns \
 			    -Wclippy::mut_mut \
 			    -Wclippy::needless_bitwise_bool \
@@ -491,8 +498,10 @@ export rust_common_flags := --edition=2021 \
 			    -Wclippy::ptr_cast_constness \
 			    -Wclippy::ref_as_ptr \
 			    -Wclippy::undocumented_unsafe_blocks \
+			    -Aclippy::uninlined_format_args \
 			    -Wclippy::unnecessary_safety_comment \
 			    -Wclippy::unnecessary_safety_doc \
+			    -Aclippy::unwrap_or_default \
 			    -Wrustdoc::missing_crate_level_docs \
 			    -Wrustdoc::unescaped_backticks
 
@@ -599,6 +608,7 @@ KBUILD_RUSTFLAGS := $(rust_common_flags) \
 		    -Crelocation-model=static \
 		    -Zfunction-sections=n \
 		    -Wclippy::float_arithmetic
+KBUILD_RUSTFLAGS_OPTION_CHKS :=
 
 KBUILD_AFLAGS_KERNEL :=
 KBUILD_CFLAGS_KERNEL :=
@@ -635,7 +645,7 @@ export KBUILD_USERCFLAGS KBUILD_USERLDFLAGS
 
 export KBUILD_CPPFLAGS NOSTDINC_FLAGS LINUXINCLUDE OBJCOPYFLAGS KBUILD_LDFLAGS
 export KBUILD_CFLAGS CFLAGS_KERNEL CFLAGS_MODULE
-export KBUILD_RUSTFLAGS RUSTFLAGS_KERNEL RUSTFLAGS_MODULE
+export KBUILD_RUSTFLAGS RUSTFLAGS_KERNEL RUSTFLAGS_MODULE KBUILD_RUSTFLAGS_OPTION_CHKS
 export KBUILD_AFLAGS AFLAGS_KERNEL AFLAGS_MODULE
 export KBUILD_AFLAGS_MODULE KBUILD_CFLAGS_MODULE KBUILD_RUSTFLAGS_MODULE KBUILD_LDFLAGS_MODULE
 export KBUILD_AFLAGS_KERNEL KBUILD_CFLAGS_KERNEL KBUILD_RUSTFLAGS_KERNEL
@@ -651,6 +661,8 @@ export RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o    \
 
 # Basic helpers built in scripts/basic/
 PHONY += scripts_basic
+scripts_basic: KBUILD_HOSTCFLAGS := $(KBUILD_HOSTCFLAGS)
+scripts_basic: KBUILD_HOSTLDFLAGS := $(KBUILD_HOSTLDFLAGS)
 scripts_basic:
 	$(Q)$(MAKE) $(build)=scripts/basic
 
@@ -799,12 +811,6 @@ endif # KBUILD_EXTMOD
 # Defaults to vmlinux, but the arch makefile usually adds further targets
 all: vmlinux
 
-CFLAGS_GCOV	:= -fprofile-arcs -ftest-coverage
-ifdef CONFIG_CC_IS_GCC
-CFLAGS_GCOV	+= -fno-tree-loop-im
-endif
-export CFLAGS_GCOV
-
 # The arch Makefiles can override CC_FLAGS_FTRACE. We may also append it later.
 ifdef CONFIG_FUNCTION_TRACER
   CC_FLAGS_FTRACE := -pg
@@ -904,6 +910,9 @@ KBUILD_CFLAGS += $(stackp-flags-y)
 ifdef CONFIG_FRAME_POINTER
 KBUILD_CFLAGS	+= -fno-omit-frame-pointer -fno-optimize-sibling-calls
 KBUILD_RUSTFLAGS += -Cforce-frame-pointers=y
+# Work around rustc bug on compilers without
+# https://github.com/rust-lang/rust/pull/156980.
+KBUILD_RUSTFLAGS += $(if $(call rustc-min-version,109800),,-Zllvm_module_flag=frame-pointer:u32:2:max)
 else
 # Some targets (ARM with Thumb2, for example), can't be built with frame
 # pointers.  For those, we don't have FUNCTION_TRACER automatically
@@ -1075,6 +1084,27 @@ endif
 # Ensure compilers do not transform certain loops into calls to wcslen()
 KBUILD_CFLAGS += -fno-builtin-wcslen
 
+CFLAGS_GCOV	:= -fprofile-arcs -ftest-coverage
+ifdef CONFIG_CC_IS_GCC
+CFLAGS_GCOV	+= -fno-tree-loop-im
+# Use atomic counter updates to avoid concurrent-access crashes in GCOV.
+# Only enable if -fprofile-update=prefer-atomic does not introduce new
+# undefined symbols (e.g. libatomic calls that the kernel cannot link).
+CFLAGS_GCOV	+= $(call try-run,\
+	echo 'long long x; void f(void){x++;}' | \
+	$(CC) $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS) -w -fprofile-arcs \
+	-ftest-coverage -x c - -c -o "$$TMP.base" && \
+	echo 'long long x; void f(void){x++;}' | \
+	$(CC) $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS) -w -fprofile-arcs \
+	-ftest-coverage -fprofile-update=prefer-atomic \
+	-x c - -c -o "$$TMP" && \
+	$(NM) "$$TMP.base" | grep ' U ' > "$$TMP.ubase" || true ; \
+	$(NM) "$$TMP" | grep ' U ' > "$$TMP.utest" || true ; \
+	cmp -s "$$TMP.ubase" "$$TMP.utest",\
+	-fprofile-update=prefer-atomic)
+endif
+export CFLAGS_GCOV
+
 # change __FILE__ to the relative path to the source directory
 ifdef building_out_of_srctree
 KBUILD_CPPFLAGS += $(call cc-option,-fmacro-prefix-map=$(srcroot)/=)
@@ -1440,6 +1470,15 @@ ifneq ($(wildcard $(resolve_btfids_O)),)
 	$(Q)$(MAKE) -sC $(srctree)/tools/bpf/resolve_btfids O=$(resolve_btfids_O) clean
 endif
 
+PHONY += objtool_clean objtool_mrproper
+
+objtool_O = $(abspath $(objtree))/tools/objtool
+
+objtool_clean objtool_mrproper:
+ifneq ($(wildcard $(objtool_O)),)
+	$(Q)$(MAKE) -sC $(abs_srctree)/tools/objtool O=$(objtool_O) srctree=$(abs_srctree) $(patsubst objtool_%,%,$@)
+endif
+
 tools/: FORCE
 	$(Q)mkdir -p $(objtree)/tools
 	$(Q)$(MAKE) O=$(abspath $(objtree)) subdir=tools -C $(srctree)/tools/
@@ -1578,7 +1617,7 @@ CLEAN_FILES += vmlinux.symvers modules-only.symvers \
 	       modules.builtin.ranges vmlinux.o.map vmlinux.unstripped \
 	       compile_commands.json rust/test \
 	       rust-project.json .vmlinux.objs .vmlinux.export.c \
-               .builtin-dtbs-list .builtin-dtb.S
+               .builtin-dtbs-list .builtin-dtbs.S
 
 # Directories & files removed with 'make mrproper'
 MRPROPER_FILES += include/config include/generated          \
@@ -1590,7 +1629,8 @@ MRPROPER_FILES += include/config include/generated          \
 		  certs/x509.genkey \
 		  vmlinux-gdb.py \
 		  rpmbuild \
-		  rust/libmacros.so rust/libmacros.dylib
+		  rust/libmacros.so rust/libmacros.dylib \
+		  rust/libpin_init_internal.so rust/libpin_init_internal.dylib
 
 # clean - Delete most, but leave enough to build external modules
 #
@@ -1602,7 +1642,7 @@ vmlinuxclean:
 	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/link-vmlinux.sh clean
 	$(Q)$(if $(ARCH_POSTLINK), $(MAKE) -f $(ARCH_POSTLINK) clean)
 
-clean: archclean vmlinuxclean resolve_btfids_clean
+clean: archclean vmlinuxclean resolve_btfids_clean objtool_clean
 
 # mrproper - Delete all generated files, including .config
 #
@@ -1613,7 +1653,7 @@ PHONY += $(mrproper-dirs) mrproper
 $(mrproper-dirs):
 	$(Q)$(MAKE) $(clean)=$(patsubst _mrproper_%,%,$@)
 
-mrproper: clean $(mrproper-dirs)
+mrproper: clean objtool_mrproper $(mrproper-dirs)
 	$(call cmd,rmfiles)
 	@find . $(RCS_FIND_IGNORE) \
 		\( -name '*.rmeta' \) \
diff --git linux-libre-6.18-gnu/arch/alpha/include/asm/Kbuild linux-libre-6.18.44-gnu/arch/alpha/include/asm/Kbuild
index 483965c5a4de2..b154b4e3dfa86 100644
--- linux-libre-6.18-gnu/arch/alpha/include/asm/Kbuild
+++ linux-libre-6.18.44-gnu/arch/alpha/include/asm/Kbuild
@@ -5,4 +5,5 @@ generic-y += agp.h
 generic-y += asm-offsets.h
 generic-y += kvm_para.h
 generic-y += mcs_spinlock.h
+generic-y += ring_buffer.h
 generic-y += text-patching.h
diff --git linux-libre-6.18-gnu/arch/alpha/include/asm/pgtable.h linux-libre-6.18.44-gnu/arch/alpha/include/asm/pgtable.h
index 90e7a95391022..c9508ec37efc4 100644
--- linux-libre-6.18-gnu/arch/alpha/include/asm/pgtable.h
+++ linux-libre-6.18.44-gnu/arch/alpha/include/asm/pgtable.h
@@ -17,6 +17,7 @@
 #include <asm/processor.h>	/* For TASK_SIZE */
 #include <asm/machvec.h>
 #include <asm/setup.h>
+#include <linux/page_table_check.h>
 
 struct mm_struct;
 struct vm_area_struct;
@@ -183,6 +184,9 @@ extern inline void pud_set(pud_t * pudp, pmd_t * pmdp)
 { pud_val(*pudp) = _PAGE_TABLE | ((((unsigned long) pmdp) - PAGE_OFFSET) << (32-PAGE_SHIFT)); }
 
 
+extern void migrate_flush_tlb_page(struct vm_area_struct *vma,
+					unsigned long addr);
+
 extern inline unsigned long
 pmd_page_vaddr(pmd_t pmd)
 {
@@ -202,7 +206,7 @@ extern inline int pte_none(pte_t pte)		{ return !pte_val(pte); }
 extern inline int pte_present(pte_t pte)	{ return pte_val(pte) & _PAGE_VALID; }
 extern inline void pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
 {
-	pte_val(*ptep) = 0;
+	WRITE_ONCE(pte_val(*ptep), 0);
 }
 
 extern inline int pmd_none(pmd_t pmd)		{ return !pmd_val(pmd); }
@@ -264,6 +268,33 @@ extern inline pte_t * pte_offset_kernel(pmd_t * dir, unsigned long address)
 
 extern pgd_t swapper_pg_dir[1024];
 
+#ifdef CONFIG_COMPACTION
+#define __HAVE_ARCH_PTEP_GET_AND_CLEAR
+
+static inline pte_t ptep_get_and_clear(struct mm_struct *mm,
+					unsigned long address,
+					pte_t *ptep)
+{
+	pte_t pte = READ_ONCE(*ptep);
+
+	pte_clear(mm, address, ptep);
+	return pte;
+}
+
+#define __HAVE_ARCH_PTEP_CLEAR_FLUSH
+
+static inline pte_t ptep_clear_flush(struct vm_area_struct *vma,
+				unsigned long addr, pte_t *ptep)
+{
+	struct mm_struct *mm = vma->vm_mm;
+	pte_t pte = ptep_get_and_clear(mm, addr, ptep);
+
+	page_table_check_pte_clear(mm, pte);
+	migrate_flush_tlb_page(vma, addr);
+	return pte;
+}
+
+#endif
 /*
  * The Alpha doesn't have any external MMU info:  the kernel page
  * tables contain all the necessary information.
diff --git linux-libre-6.18-gnu/arch/alpha/include/asm/tlbflush.h linux-libre-6.18.44-gnu/arch/alpha/include/asm/tlbflush.h
index ba4b359d6c395..0c8529997f54e 100644
--- linux-libre-6.18-gnu/arch/alpha/include/asm/tlbflush.h
+++ linux-libre-6.18.44-gnu/arch/alpha/include/asm/tlbflush.h
@@ -58,7 +58,9 @@ flush_tlb_other(struct mm_struct *mm)
 	unsigned long *mmc = &mm->context[smp_processor_id()];
 	/* Check it's not zero first to avoid cacheline ping pong
 	   when possible.  */
-	if (*mmc) *mmc = 0;
+
+	if (READ_ONCE(*mmc))
+		WRITE_ONCE(*mmc, 0);
 }
 
 #ifndef CONFIG_SMP
diff --git linux-libre-6.18-gnu/arch/alpha/include/uapi/asm/ioctls.h linux-libre-6.18.44-gnu/arch/alpha/include/uapi/asm/ioctls.h
index 971311605288f..a09d04b49cc65 100644
--- linux-libre-6.18-gnu/arch/alpha/include/uapi/asm/ioctls.h
+++ linux-libre-6.18.44-gnu/arch/alpha/include/uapi/asm/ioctls.h
@@ -23,10 +23,10 @@
 #define TCSETSW		_IOW('t', 21, struct termios)
 #define TCSETSF		_IOW('t', 22, struct termios)
 
-#define TCGETA		_IOR('t', 23, struct termio)
-#define TCSETA		_IOW('t', 24, struct termio)
-#define TCSETAW		_IOW('t', 25, struct termio)
-#define TCSETAF		_IOW('t', 28, struct termio)
+#define TCGETA          0x40127417
+#define TCSETA          0x80127418
+#define TCSETAW         0x80127419
+#define TCSETAF         0x8012741c
 
 #define TCSBRK		_IO('t', 29)
 #define TCXONC		_IO('t', 30)
diff --git linux-libre-6.18-gnu/arch/alpha/kernel/pci-sysfs.c linux-libre-6.18.44-gnu/arch/alpha/kernel/pci-sysfs.c
index 3048758304b57..21833d1c867d7 100644
--- linux-libre-6.18-gnu/arch/alpha/kernel/pci-sysfs.c
+++ linux-libre-6.18.44-gnu/arch/alpha/kernel/pci-sysfs.c
@@ -11,6 +11,7 @@
  */
 
 #include <linux/sched.h>
+#include <linux/security.h>
 #include <linux/stat.h>
 #include <linux/slab.h>
 #include <linux/pci.h>
@@ -36,12 +37,16 @@ static int hose_mmap_page_range(struct pci_controller *hose,
 static int __pci_mmap_fits(struct pci_dev *pdev, int num,
 			   struct vm_area_struct *vma, int sparse)
 {
+	resource_size_t len = pci_resource_len(pdev, num);
 	unsigned long nr, start, size;
 	int shift = sparse ? 5 : 0;
 
+	if (!len)
+		return 0;
+
 	nr = vma_pages(vma);
 	start = vma->vm_pgoff;
-	size = ((pci_resource_len(pdev, num) - 1) >> (PAGE_SHIFT - shift)) + 1;
+	size = ((len - 1) >> (PAGE_SHIFT - shift)) + 1;
 
 	if (start < size && size - start >= nr)
 		return 1;
@@ -71,7 +76,11 @@ static int pci_mmap_resource(struct kobject *kobj,
 	struct resource *res = attr->private;
 	enum pci_mmap_state mmap_type;
 	struct pci_bus_region bar;
-	int i;
+	int i, ret;
+
+	ret = security_locked_down(LOCKDOWN_PCI_ACCESS);
+	if (ret)
+		return ret;
 
 	for (i = 0; i < PCI_STD_NUM_BARS; i++)
 		if (res == &pdev->resource[i])
diff --git linux-libre-6.18-gnu/arch/alpha/kernel/vmlinux.lds.S linux-libre-6.18.44-gnu/arch/alpha/kernel/vmlinux.lds.S
index 2efa7dfc798a9..2d136c63db161 100644
--- linux-libre-6.18-gnu/arch/alpha/kernel/vmlinux.lds.S
+++ linux-libre-6.18.44-gnu/arch/alpha/kernel/vmlinux.lds.S
@@ -71,6 +71,7 @@ SECTIONS
 
 	STABS_DEBUG
 	DWARF_DEBUG
+	MODINFO
 	ELF_DETAILS
 
 	DISCARDS
diff --git linux-libre-6.18-gnu/arch/alpha/mm/Makefile linux-libre-6.18.44-gnu/arch/alpha/mm/Makefile
index 101dbd06b4ceb..2d05664058f64 100644
--- linux-libre-6.18-gnu/arch/alpha/mm/Makefile
+++ linux-libre-6.18.44-gnu/arch/alpha/mm/Makefile
@@ -3,4 +3,4 @@
 # Makefile for the linux alpha-specific parts of the memory manager.
 #
 
-obj-y	:= init.o fault.o
+obj-y	:= init.o fault.o tlbflush.o
diff --git linux-libre-6.18-gnu/arch/alpha/mm/tlbflush.c linux-libre-6.18.44-gnu/arch/alpha/mm/tlbflush.c
new file mode 100644
index 0000000000000..ccbc317b9a348
--- /dev/null
+++ linux-libre-6.18.44-gnu/arch/alpha/mm/tlbflush.c
@@ -0,0 +1,112 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Alpha TLB shootdown helpers
+ *
+ * Copyright (C) 2025 Magnus Lindholm <linmag7@gmail.com>
+ *
+ * Alpha-specific TLB flush helpers that cannot be expressed purely
+ * as inline functions.
+ *
+ * These helpers provide combined MM context handling (ASN rollover)
+ * and immediate TLB invalidation for page migration and memory
+ * compaction paths, where lazy shootdowns are insufficient.
+ */
+
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/sched.h>
+#include <asm/tlbflush.h>
+#include <asm/pal.h>
+#include <asm/mmu_context.h>
+
+#define asn_locked() (cpu_data[smp_processor_id()].asn_lock)
+
+/*
+ * Migration/compaction helper: combine mm context (ASN) handling with an
+ * immediate per-page TLB invalidate and (for exec) an instruction barrier.
+ *
+ * This mirrors the SMP combined IPI handler semantics, but runs locally on UP.
+ */
+#ifndef CONFIG_SMP
+void migrate_flush_tlb_page(struct vm_area_struct *vma,
+					   unsigned long addr)
+{
+	struct mm_struct *mm = vma->vm_mm;
+	int tbi_type = (vma->vm_flags & VM_EXEC) ? 3 : 2;
+
+	/*
+	 * First do the mm-context side:
+	 * If we're currently running this mm, reload a fresh context ASN.
+	 * Otherwise, mark context invalid.
+	 *
+	 * On UP, this is mostly about matching the SMP semantics and ensuring
+	 * exec/i-cache tagging assumptions hold when compaction migrates pages.
+	 */
+	if (mm == current->active_mm)
+		flush_tlb_current(mm);
+	else
+		flush_tlb_other(mm);
+
+	/*
+	 * Then do the immediate translation kill for this VA.
+	 * For exec mappings, order instruction fetch after invalidation.
+	 */
+	tbi(tbi_type, addr);
+}
+
+#else
+struct tlb_mm_and_addr {
+	struct mm_struct *mm;
+	unsigned long addr;
+	int tbi_type;	/* 2 = DTB, 3 = ITB+DTB */
+};
+
+static void ipi_flush_mm_and_page(void *x)
+{
+	struct tlb_mm_and_addr *d = x;
+
+	/* Part 1: mm context side (Alpha uses ASN/context as a key mechanism). */
+	if (d->mm == current->active_mm && !asn_locked())
+		__load_new_mm_context(d->mm);
+	else
+		flush_tlb_other(d->mm);
+
+	/* Part 2: immediate per-VA invalidation on this CPU. */
+	tbi(d->tbi_type, d->addr);
+}
+
+void migrate_flush_tlb_page(struct vm_area_struct *vma, unsigned long addr)
+{
+	struct mm_struct *mm = vma->vm_mm;
+	struct tlb_mm_and_addr d = {
+		.mm = mm,
+		.addr = addr,
+		.tbi_type = (vma->vm_flags & VM_EXEC) ? 3 : 2,
+	};
+
+	/*
+	 * One synchronous rendezvous: every CPU runs ipi_flush_mm_and_page().
+	 * This is the "combined" version of flush_tlb_mm + per-page invalidate.
+	 */
+	preempt_disable();
+	on_each_cpu(ipi_flush_mm_and_page, &d, 1);
+
+	/*
+	 * mimic flush_tlb_mm()'s mm_users<=1 optimization.
+	 */
+	if (atomic_read(&mm->mm_users) <= 1) {
+
+		int cpu, this_cpu;
+		this_cpu = smp_processor_id();
+
+		for (cpu = 0; cpu < NR_CPUS; cpu++) {
+			if (!cpu_online(cpu) || cpu == this_cpu)
+				continue;
+			if (READ_ONCE(mm->context[cpu]))
+				WRITE_ONCE(mm->context[cpu], 0);
+		}
+	}
+	preempt_enable();
+}
+
+#endif
diff --git linux-libre-6.18-gnu/arch/arc/include/asm/Kbuild linux-libre-6.18.44-gnu/arch/arc/include/asm/Kbuild
index 4c69522e0328e..483caacc69884 100644
--- linux-libre-6.18-gnu/arch/arc/include/asm/Kbuild
+++ linux-libre-6.18.44-gnu/arch/arc/include/asm/Kbuild
@@ -5,5 +5,6 @@ generic-y += extable.h
 generic-y += kvm_para.h
 generic-y += mcs_spinlock.h
 generic-y += parport.h
+generic-y += ring_buffer.h
 generic-y += user.h
 generic-y += text-patching.h
diff --git linux-libre-6.18-gnu/arch/arc/kernel/vmlinux.lds.S linux-libre-6.18.44-gnu/arch/arc/kernel/vmlinux.lds.S
index 61a1b2b96e1d8..6af63084ff285 100644
--- linux-libre-6.18-gnu/arch/arc/kernel/vmlinux.lds.S
+++ linux-libre-6.18.44-gnu/arch/arc/kernel/vmlinux.lds.S
@@ -123,6 +123,7 @@ SECTIONS
 	_end = . ;
 
 	STABS_DEBUG
+	MODINFO
 	ELF_DETAILS
 	DISCARDS
 
diff --git linux-libre-6.18-gnu/arch/arc/net/bpf_jit_arcv2.c linux-libre-6.18.44-gnu/arch/arc/net/bpf_jit_arcv2.c
index 6d989b6d88c69..7ee50aeae5a45 100644
--- linux-libre-6.18-gnu/arch/arc/net/bpf_jit_arcv2.c
+++ linux-libre-6.18.44-gnu/arch/arc/net/bpf_jit_arcv2.c
@@ -2427,7 +2427,7 @@ u8 arc_prologue(u8 *buf, u32 usage, u16 frame_size)
 
 #ifdef ARC_BPF_JIT_DEBUG
 	if ((usage & BIT(ARC_R_FP)) && frame_size == 0) {
-		pr_err("FP is being saved while there is no frame.");
+		pr_err("FP is being saved while there is no frame.\n");
 		BUG();
 	}
 #endif
@@ -2454,7 +2454,7 @@ u8 arc_epilogue(u8 *buf, u32 usage, u16 frame_size)
 
 #ifdef ARC_BPF_JIT_DEBUG
 	if ((usage & BIT(ARC_R_FP)) && frame_size == 0) {
-		pr_err("FP is being saved while there is no frame.");
+		pr_err("FP is being saved while there is no frame.\n");
 		BUG();
 	}
 #endif
@@ -2868,7 +2868,7 @@ u8 gen_jmp_64(u8 *buf, u8 rd, u8 rs, u8 cond, u32 curr_off, u32 targ_off)
 		break;
 	default:
 #ifdef ARC_BPF_JIT_DEBUG
-		pr_err("64-bit jump condition is not known.");
+		pr_err("64-bit jump condition is not known.\n");
 		BUG();
 #endif
 	}
@@ -2948,7 +2948,7 @@ u8 gen_jmp_32(u8 *buf, u8 rd, u8 rs, u8 cond, u32 curr_off, u32 targ_off)
 	 */
 	if (cond >= ARC_CC_LAST) {
 #ifdef ARC_BPF_JIT_DEBUG
-		pr_err("32-bit jump condition is not known.");
+		pr_err("32-bit jump condition is not known.\n");
 		BUG();
 #endif
 		return 0;
diff --git linux-libre-6.18-gnu/arch/arm/Kconfig linux-libre-6.18.44-gnu/arch/arm/Kconfig
index 4fb985b76e97f..e481254e36455 100644
--- linux-libre-6.18-gnu/arch/arm/Kconfig
+++ linux-libre-6.18.44-gnu/arch/arm/Kconfig
@@ -134,7 +134,7 @@ config ARM
 	select MMU_GATHER_RCU_TABLE_FREE if SMP && ARM_LPAE
 	select HAVE_REGS_AND_STACK_ACCESS_API
 	select HAVE_RSEQ
-	select HAVE_RUST if CPU_LITTLE_ENDIAN && CPU_32v7
+	select HAVE_RUST if CPU_LITTLE_ENDIAN && CPU_32v7 && !KASAN
 	select HAVE_STACKPROTECTOR
 	select HAVE_SYSCALL_TRACEPOINTS
 	select HAVE_UID16
@@ -1215,7 +1215,7 @@ config HIGHMEM
 
 config HIGHPTE
 	bool "Allocate 2nd-level pagetables from highmem" if EXPERT
-	depends on HIGHMEM
+	depends on HIGHMEM && !PREEMPT_RT
 	default y
 	help
 	  The VM uses one page of physical memory for each page table.
diff --git linux-libre-6.18-gnu/arch/arm/boot/compressed/vmlinux.lds.S linux-libre-6.18.44-gnu/arch/arm/boot/compressed/vmlinux.lds.S
index d411abd4310ea..2d916647df03c 100644
--- linux-libre-6.18-gnu/arch/arm/boot/compressed/vmlinux.lds.S
+++ linux-libre-6.18.44-gnu/arch/arm/boot/compressed/vmlinux.lds.S
@@ -21,6 +21,7 @@ SECTIONS
     COMMON_DISCARDS
     *(.ARM.exidx*)
     *(.ARM.extab*)
+    *(.modinfo)
     *(.note.*)
     *(.rel.*)
     *(.printk_index)
diff --git linux-libre-6.18-gnu/arch/arm/boot/dts/allwinner/sun5i-a13-utoo-p66.dts linux-libre-6.18.44-gnu/arch/arm/boot/dts/allwinner/sun5i-a13-utoo-p66.dts
index be486d28d04fa..428cab5a0e906 100644
--- linux-libre-6.18-gnu/arch/arm/boot/dts/allwinner/sun5i-a13-utoo-p66.dts
+++ linux-libre-6.18.44-gnu/arch/arm/boot/dts/allwinner/sun5i-a13-utoo-p66.dts
@@ -102,6 +102,7 @@
 	/* The P66 uses a different EINT then the reference design */
 	interrupts = <6 9 IRQ_TYPE_EDGE_FALLING>; /* EINT9 (PG9) */
 	/* The icn8318 binding expects wake-gpios instead of power-gpios */
+	/delete-property/ power-gpios;
 	wake-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB