diff --git linux-libre-6.6-gnu/.gitignore linux-libre-6.6.147-gnu/.gitignore
index 0bbae167bf93e..d1a8ab3f98aaf 100644
--- linux-libre-6.6-gnu/.gitignore
+++ linux-libre-6.6.147-gnu/.gitignore
@@ -135,7 +135,6 @@ GTAGS
 # id-utils files
 ID
 
-*.orig
 *~
 \#*#
 
diff --git linux-libre-6.6-gnu/Documentation/ABI/stable/sysfs-block linux-libre-6.6.147-gnu/Documentation/ABI/stable/sysfs-block
index 1fe9a553c37b7..f0025d1c3d5ac 100644
--- linux-libre-6.6-gnu/Documentation/ABI/stable/sysfs-block
+++ linux-libre-6.6.147-gnu/Documentation/ABI/stable/sysfs-block
@@ -101,6 +101,16 @@ Description:
 		devices that support receiving integrity metadata.
 
 
+What:		/sys/block/<disk>/partscan
+Date:		May 2024
+Contact:	Christoph Hellwig <hch@lst.de>
+Description:
+		The /sys/block/<disk>/partscan files reports if partition
+		scanning is enabled for the disk.  It returns "1" if partition
+		scanning is enabled, or "0" if not.  The value type is a 32-bit
+		unsigned integer, but only "0" and "1" are valid values.
+
+
 What:		/sys/block/<disk>/<partition>/alignment_offset
 Date:		April 2009
 Contact:	Martin K. Petersen <martin.petersen@oracle.com>
diff --git linux-libre-6.6-gnu/Documentation/ABI/stable/sysfs-driver-dma-idxd linux-libre-6.6.147-gnu/Documentation/ABI/stable/sysfs-driver-dma-idxd
index 825e619250bf2..f2ec42949a54d 100644
--- linux-libre-6.6-gnu/Documentation/ABI/stable/sysfs-driver-dma-idxd
+++ linux-libre-6.6.147-gnu/Documentation/ABI/stable/sysfs-driver-dma-idxd
@@ -270,6 +270,12 @@ Description:	Shows the operation capability bits displayed in bitmap format
 		correlates to the operations allowed. It's visible only
 		on platforms that support the capability.
 
+What:		/sys/bus/dsa/devices/wq<m>.<n>/driver_name
+Date:		Sept 8, 2023
+KernelVersion:	6.7.0
+Contact:	dmaengine@vger.kernel.org
+Description:	Name of driver to be bounded to the wq.
+
 What:           /sys/bus/dsa/devices/engine<m>.<n>/group_id
 Date:           Oct 25, 2019
 KernelVersion:  5.6.0
diff --git linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-bus-iio-filter-admv8818 linux-libre-6.6.147-gnu/Documentation/ABI/testing/sysfs-bus-iio-filter-admv8818
index 31dbb390573ff..c431f0a13cf50 100644
--- linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-bus-iio-filter-admv8818
+++ linux-libre-6.6.147-gnu/Documentation/ABI/testing/sysfs-bus-iio-filter-admv8818
@@ -3,7 +3,7 @@ KernelVersion:
 Contact:	linux-iio@vger.kernel.org
 Description:
 		Reading this returns the valid values that can be written to the
-		on_altvoltage0_mode attribute:
+		filter_mode attribute:
 
 		- auto -> Adjust bandpass filter to track changes in input clock rate.
 		- manual -> disable/unregister the clock rate notifier / input clock tracking.
diff --git linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-bus-optee-devices linux-libre-6.6.147-gnu/Documentation/ABI/testing/sysfs-bus-optee-devices
index 0f58701367b66..af31e5a22d89f 100644
--- linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-bus-optee-devices
+++ linux-libre-6.6.147-gnu/Documentation/ABI/testing/sysfs-bus-optee-devices
@@ -6,3 +6,12 @@ Description:
 		OP-TEE bus provides reference to registered drivers under this directory. The <uuid>
 		matches Trusted Application (TA) driver and corresponding TA in secure OS. Drivers
 		are free to create needed API under optee-ta-<uuid> directory.
+
+What:		/sys/bus/tee/devices/optee-ta-<uuid>/need_supplicant
+Date:		November 2023
+KernelVersion:	6.7
+Contact:	op-tee@lists.trustedfirmware.org
+Description:
+		Allows to distinguish whether an OP-TEE based TA/device requires user-space
+		tee-supplicant to function properly or not. This attribute will be present for
+		devices which depend on tee-supplicant to be running.
diff --git linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-bus-pci linux-libre-6.6.147-gnu/Documentation/ABI/testing/sysfs-bus-pci
index ecf47559f495b..7f3e6bc3ff0ff 100644
--- linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-bus-pci
+++ linux-libre-6.6.147-gnu/Documentation/ABI/testing/sysfs-bus-pci
@@ -163,6 +163,17 @@ Description:
 		will be present in sysfs.  Writing 1 to this file
 		will perform reset.
 
+What:		/sys/bus/pci/devices/.../reset_subordinate
+Date:		October 2024
+Contact:	linux-pci@vger.kernel.org
+Description:
+		This is visible only for bridge devices. If you want to reset
+		all devices attached through the subordinate bus of a specific
+		bridge device, writing 1 to this will try to do it.  This will
+		affect all devices attached to the system through this bridge
+		similiar to writing 1 to their individual "reset" file, so use
+		with caution.
+
 What:		/sys/bus/pci/devices/.../vpd
 Date:		February 2008
 Contact:	Ben Hutchings <bwh@kernel.org>
diff --git linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-bus-pci-drivers-xhci_hcd linux-libre-6.6.147-gnu/Documentation/ABI/testing/sysfs-bus-pci-drivers-xhci_hcd
index 5a775b8f65435..fc82aa4e54b00 100644
--- linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-bus-pci-drivers-xhci_hcd
+++ linux-libre-6.6.147-gnu/Documentation/ABI/testing/sysfs-bus-pci-drivers-xhci_hcd
@@ -75,3 +75,13 @@ Description:
 		The default value is 1  (GNU Remote Debug command).
 		Other permissible value is 0 which is for vendor defined debug
 		target.
+
+What:		/sys/bus/pci/drivers/xhci_hcd/.../dbc_poll_interval_ms
+Date:		February 2024
+Contact:	Mathias Nyman <mathias.nyman@linux.intel.com>
+Description:
+		This attribute adjust the polling interval used to check for
+		DbC events. Unit is milliseconds. Accepted values range from 0
+		up to 5000. The default value is 64 ms.
+		This polling interval is used while DbC is enabled but has no
+		active data transfers.
diff --git linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-class-devfreq linux-libre-6.6.147-gnu/Documentation/ABI/testing/sysfs-class-devfreq
index 5e6b74f304062..1e7e0bb4c14ec 100644
--- linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-class-devfreq
+++ linux-libre-6.6.147-gnu/Documentation/ABI/testing/sysfs-class-devfreq
@@ -52,6 +52,9 @@ Description:
 
 			echo 0 > /sys/class/devfreq/.../trans_stat
 
+		If the transition table is bigger than PAGE_SIZE, reading
+		this will return an -EFBIG error.
+
 What:		/sys/class/devfreq/.../available_frequencies
 Date:		October 2012
 Contact:	Nishanth Menon <nm@ti.com>
diff --git linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-class-led linux-libre-6.6.147-gnu/Documentation/ABI/testing/sysfs-class-led
index b2ff0012c0f2b..2e24ac3bd7efa 100644
--- linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-class-led
+++ linux-libre-6.6.147-gnu/Documentation/ABI/testing/sysfs-class-led
@@ -59,15 +59,6 @@ Description:
 		brightness. Reading this file when no hw brightness change
 		event has happened will return an ENODATA error.
 
-What:		/sys/class/leds/<led>/color
-Date:		June 2023
-KernelVersion:	6.5
-Description:
-		Color of the LED.
-
-		This is a read-only file. Reading this file returns the color
-		of the LED as a string (e.g: "red", "green", "multicolor").
-
 What:		/sys/class/leds/<led>/trigger
 Date:		March 2006
 KernelVersion:	2.6.17
diff --git linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-class-net-queues linux-libre-6.6.147-gnu/Documentation/ABI/testing/sysfs-class-net-queues
index 906ff3ca928ac..5bff64d256c20 100644
--- linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-class-net-queues
+++ linux-libre-6.6.147-gnu/Documentation/ABI/testing/sysfs-class-net-queues
@@ -1,4 +1,4 @@
-What:		/sys/class/<iface>/queues/rx-<queue>/rps_cpus
+What:		/sys/class/net/<iface>/queues/rx-<queue>/rps_cpus
 Date:		March 2010
 KernelVersion:	2.6.35
 Contact:	netdev@vger.kernel.org
@@ -8,7 +8,7 @@ Description:
 		network device queue. Possible values depend on the number
 		of available CPU(s) in the system.
 
-What:		/sys/class/<iface>/queues/rx-<queue>/rps_flow_cnt
+What:		/sys/class/net/<iface>/queues/rx-<queue>/rps_flow_cnt
 Date:		April 2010
 KernelVersion:	2.6.35
 Contact:	netdev@vger.kernel.org
@@ -16,7 +16,7 @@ Description:
 		Number of Receive Packet Steering flows being currently
 		processed by this particular network device receive queue.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/tx_timeout
+What:		/sys/class/net/<iface>/queues/tx-<queue>/tx_timeout
 Date:		November 2011
 KernelVersion:	3.3
 Contact:	netdev@vger.kernel.org
@@ -24,7 +24,7 @@ Description:
 		Indicates the number of transmit timeout events seen by this
 		network interface transmit queue.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/tx_maxrate
+What:		/sys/class/net/<iface>/queues/tx-<queue>/tx_maxrate
 Date:		March 2015
 KernelVersion:	4.1
 Contact:	netdev@vger.kernel.org
@@ -32,7 +32,7 @@ Description:
 		A Mbps max-rate set for the queue, a value of zero means disabled,
 		default is disabled.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/xps_cpus
+What:		/sys/class/net/<iface>/queues/tx-<queue>/xps_cpus
 Date:		November 2010
 KernelVersion:	2.6.38
 Contact:	netdev@vger.kernel.org
@@ -42,7 +42,7 @@ Description:
 		network device transmit queue. Possible values depend on the
 		number of available CPU(s) in the system.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/xps_rxqs
+What:		/sys/class/net/<iface>/queues/tx-<queue>/xps_rxqs
 Date:		June 2018
 KernelVersion:	4.18.0
 Contact:	netdev@vger.kernel.org
@@ -53,7 +53,7 @@ Description:
 		number of available receive queue(s) in the network device.
 		Default is disabled.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/hold_time
+What:		/sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/hold_time
 Date:		November 2011
 KernelVersion:	3.3
 Contact:	netdev@vger.kernel.org
@@ -62,7 +62,7 @@ Description:
 		of this particular network device transmit queue.
 		Default value is 1000.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/inflight
+What:		/sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/inflight
 Date:		November 2011
 KernelVersion:	3.3
 Contact:	netdev@vger.kernel.org
@@ -70,7 +70,7 @@ Description:
 		Indicates the number of bytes (objects) in flight on this
 		network device transmit queue.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/limit
+What:		/sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/limit
 Date:		November 2011
 KernelVersion:	3.3
 Contact:	netdev@vger.kernel.org
@@ -79,7 +79,7 @@ Description:
 		on this network device transmit queue. This value is clamped
 		to be within the bounds defined by limit_max and limit_min.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/limit_max
+What:		/sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/limit_max
 Date:		November 2011
 KernelVersion:	3.3
 Contact:	netdev@vger.kernel.org
@@ -88,7 +88,7 @@ Description:
 		queued on this network device transmit queue. See
 		include/linux/dynamic_queue_limits.h for the default value.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/limit_min
+What:		/sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/limit_min
 Date:		November 2011
 KernelVersion:	3.3
 Contact:	netdev@vger.kernel.org
diff --git linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-class-net-statistics linux-libre-6.6.147-gnu/Documentation/ABI/testing/sysfs-class-net-statistics
index 55db27815361b..53e508c6936a5 100644
--- linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-class-net-statistics
+++ linux-libre-6.6.147-gnu/Documentation/ABI/testing/sysfs-class-net-statistics
@@ -1,4 +1,4 @@
-What:		/sys/class/<iface>/statistics/collisions
+What:		/sys/class/net/<iface>/statistics/collisions
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -6,7 +6,7 @@ Description:
 		Indicates the number of collisions seen by this network device.
 		This value might not be relevant with all MAC layers.
 
-What:		/sys/class/<iface>/statistics/multicast
+What:		/sys/class/net/<iface>/statistics/multicast
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -14,7 +14,7 @@ Description:
 		Indicates the number of multicast packets received by this
 		network device.
 
-What:		/sys/class/<iface>/statistics/rx_bytes
+What:		/sys/class/net/<iface>/statistics/rx_bytes
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -23,7 +23,7 @@ Description:
 		See the network driver for the exact meaning of when this
 		value is incremented.
 
-What:		/sys/class/<iface>/statistics/rx_compressed
+What:		/sys/class/net/<iface>/statistics/rx_compressed
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -32,7 +32,7 @@ Description:
 		network device. This value might only be relevant for interfaces
 		that support packet compression (e.g: PPP).
 
-What:		/sys/class/<iface>/statistics/rx_crc_errors
+What:		/sys/class/net/<iface>/statistics/rx_crc_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -41,7 +41,7 @@ Description:
 		by this network device. Note that the specific meaning might
 		depend on the MAC layer used by the interface.
 
-What:		/sys/class/<iface>/statistics/rx_dropped
+What:		/sys/class/net/<iface>/statistics/rx_dropped
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -51,7 +51,7 @@ Description:
 		packet processing. See the network driver for the exact
 		meaning of this value.
 
-What:		/sys/class/<iface>/statistics/rx_errors
+What:		/sys/class/net/<iface>/statistics/rx_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -59,7 +59,7 @@ Description:
 		Indicates the number of receive errors on this network device.
 		See the network driver for the exact meaning of this value.
 
-What:		/sys/class/<iface>/statistics/rx_fifo_errors
+What:		/sys/class/net/<iface>/statistics/rx_fifo_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -68,7 +68,7 @@ Description:
 		network device. See the network driver for the exact
 		meaning of this value.
 
-What:		/sys/class/<iface>/statistics/rx_frame_errors
+What:		/sys/class/net/<iface>/statistics/rx_frame_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -78,7 +78,7 @@ Description:
 		on the MAC layer protocol used. See the network driver for
 		the exact meaning of this value.
 
-What:		/sys/class/<iface>/statistics/rx_length_errors
+What:		/sys/class/net/<iface>/statistics/rx_length_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -87,7 +87,7 @@ Description:
 		error, oversized or undersized. See the network driver for the
 		exact meaning of this value.
 
-What:		/sys/class/<iface>/statistics/rx_missed_errors
+What:		/sys/class/net/<iface>/statistics/rx_missed_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -96,7 +96,7 @@ Description:
 		due to lack of capacity in the receive side. See the network
 		driver for the exact meaning of this value.
 
-What:		/sys/class/<iface>/statistics/rx_nohandler
+What:		/sys/class/net/<iface>/statistics/rx_nohandler
 Date:		February 2016
 KernelVersion:	4.6
 Contact:	netdev@vger.kernel.org
@@ -104,7 +104,7 @@ Description:
 		Indicates the number of received packets that were dropped on
 		an inactive device by the network core.
 
-What:		/sys/class/<iface>/statistics/rx_over_errors
+What:		/sys/class/net/<iface>/statistics/rx_over_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -114,7 +114,7 @@ Description:
 		(e.g: larger than MTU). See the network driver for the exact
 		meaning of this value.
 
-What:		/sys/class/<iface>/statistics/rx_packets
+What:		/sys/class/net/<iface>/statistics/rx_packets
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -122,7 +122,7 @@ Description:
 		Indicates the total number of good packets received by this
 		network device.
 
-What:		/sys/class/<iface>/statistics/tx_aborted_errors
+What:		/sys/class/net/<iface>/statistics/tx_aborted_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -132,7 +132,7 @@ Description:
 		a medium collision). See the network driver for the exact
 		meaning of this value.
 
-What:		/sys/class/<iface>/statistics/tx_bytes
+What:		/sys/class/net/<iface>/statistics/tx_bytes
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -143,7 +143,7 @@ Description:
 		transmitted packets or all packets that have been queued for
 		transmission.
 
-What:		/sys/class/<iface>/statistics/tx_carrier_errors
+What:		/sys/class/net/<iface>/statistics/tx_carrier_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -152,7 +152,7 @@ Description:
 		because of carrier errors (e.g: physical link down). See the
 		network driver for the exact meaning of this value.
 
-What:		/sys/class/<iface>/statistics/tx_compressed
+What:		/sys/class/net/<iface>/statistics/tx_compressed
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -161,7 +161,7 @@ Description:
 		this might only be relevant for devices that support
 		compression (e.g: PPP).
 
-What:		/sys/class/<iface>/statistics/tx_dropped
+What:		/sys/class/net/<iface>/statistics/tx_dropped
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -170,7 +170,7 @@ Description:
 		See the driver for the exact reasons as to why the packets were
 		dropped.
 
-What:		/sys/class/<iface>/statistics/tx_errors
+What:		/sys/class/net/<iface>/statistics/tx_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -179,7 +179,7 @@ Description:
 		a network device. See the driver for the exact reasons as to
 		why the packets were dropped.
 
-What:		/sys/class/<iface>/statistics/tx_fifo_errors
+What:		/sys/class/net/<iface>/statistics/tx_fifo_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -188,7 +188,7 @@ Description:
 		FIFO error. See the driver for the exact reasons as to why the
 		packets were dropped.
 
-What:		/sys/class/<iface>/statistics/tx_heartbeat_errors
+What:		/sys/class/net/<iface>/statistics/tx_heartbeat_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -197,7 +197,7 @@ Description:
 		reported as heartbeat errors. See the driver for the exact
 		reasons as to why the packets were dropped.
 
-What:		/sys/class/<iface>/statistics/tx_packets
+What:		/sys/class/net/<iface>/statistics/tx_packets
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -206,7 +206,7 @@ Description:
 		device. See the driver for whether this reports the number of all
 		attempted or successful transmissions.
 
-What:		/sys/class/<iface>/statistics/tx_window_errors
+What:		/sys/class/net/<iface>/statistics/tx_window_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
diff --git linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-devices-system-cpu linux-libre-6.6.147-gnu/Documentation/ABI/testing/sysfs-devices-system-cpu
index 7ecd5c8161a61..cfa393c51f4d6 100644
--- linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-devices-system-cpu
+++ linux-libre-6.6.147-gnu/Documentation/ABI/testing/sysfs-devices-system-cpu
@@ -514,17 +514,21 @@ Description:	information about CPUs heterogeneity.
 
 What:		/sys/devices/system/cpu/vulnerabilities
 		/sys/devices/system/cpu/vulnerabilities/gather_data_sampling
+		/sys/devices/system/cpu/vulnerabilities/indirect_target_selection
 		/sys/devices/system/cpu/vulnerabilities/itlb_multihit
 		/sys/devices/system/cpu/vulnerabilities/l1tf
 		/sys/devices/system/cpu/vulnerabilities/mds
 		/sys/devices/system/cpu/vulnerabilities/meltdown
 		/sys/devices/system/cpu/vulnerabilities/mmio_stale_data
+		/sys/devices/system/cpu/vulnerabilities/reg_file_data_sampling
 		/sys/devices/system/cpu/vulnerabilities/retbleed
 		/sys/devices/system/cpu/vulnerabilities/spec_store_bypass
 		/sys/devices/system/cpu/vulnerabilities/spectre_v1
 		/sys/devices/system/cpu/vulnerabilities/spectre_v2
 		/sys/devices/system/cpu/vulnerabilities/srbds
+		/sys/devices/system/cpu/vulnerabilities/tsa
 		/sys/devices/system/cpu/vulnerabilities/tsx_async_abort
+		/sys/devices/system/cpu/vulnerabilities/vmscape
 Date:		January 2018
 Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
 Description:	Information about CPU vulnerabilities
@@ -564,7 +568,8 @@ Description:	Control Symmetric Multi Threading (SMT)
 			 ================ =========================================
 
 			 If control status is "forceoff" or "notsupported" writes
-			 are rejected.
+			 are rejected. Note that enabling SMT on PowerPC skips
+			 offline cores.
 
 What:		/sys/devices/system/cpu/cpuX/power/energy_perf_bias
 Date:		March 2019
diff --git linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-driver-qat linux-libre-6.6.147-gnu/Documentation/ABI/testing/sysfs-driver-qat
index ef6d6c57105ef..96834d103a09e 100644
--- linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-driver-qat
+++ linux-libre-6.6.147-gnu/Documentation/ABI/testing/sysfs-driver-qat
@@ -29,6 +29,8 @@ Description:	(RW) Reports the current configuration of the QAT device.
 		  services
 		* asym;sym: identical to sym;asym
 		* dc: the device is configured for running compression services
+		* dcc: identical to dc but enables the dc chaining feature,
+		  hash then compression. If this is not required chose dc
 		* sym: the device is configured for running symmetric crypto
 		  services
 		* asym: the device is configured for running asymmetric crypto
diff --git linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-driver-ufs linux-libre-6.6.147-gnu/Documentation/ABI/testing/sysfs-driver-ufs
index 0c7efaf62de0c..84131641580c9 100644
--- linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-driver-ufs
+++ linux-libre-6.6.147-gnu/Documentation/ABI/testing/sysfs-driver-ufs
@@ -711,7 +711,7 @@ Description:	This file shows the thin provisioning type. This is one of
 
 		The file is read only.
 
-What:		/sys/class/scsi_device/*/device/unit_descriptor/physical_memory_resourse_count
+What:		/sys/class/scsi_device/*/device/unit_descriptor/physical_memory_resource_count
 Date:		February 2018
 Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows the total physical memory resources. This is
diff --git linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-fs-f2fs linux-libre-6.6.147-gnu/Documentation/ABI/testing/sysfs-fs-f2fs
index 36c3cb5479013..33675e718a376 100644
--- linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-fs-f2fs
+++ linux-libre-6.6.147-gnu/Documentation/ABI/testing/sysfs-fs-f2fs
@@ -311,10 +311,13 @@ Description:	Do background GC aggressively when set. Set to 0 by default.
 		GC approach and turns SSR mode on.
 		gc urgent low(2): lowers the bar of checking I/O idling in
 		order to process outstanding discard commands and GC a
-		little bit aggressively. uses cost benefit GC approach.
+		little bit aggressively. always uses cost benefit GC approach,
+		and will override age-threshold GC approach if ATGC is enabled
+		at the same time.
 		gc urgent mid(3): does GC forcibly in a period of given
 		gc_urgent_sleep_time and executes a mid level of I/O idling check.
-		uses cost benefit GC approach.
+		always uses cost benefit GC approach, and will override
+		age-threshold GC approach if ATGC is enabled at the same time.
 
 What:		/sys/fs/f2fs/<disk>/gc_urgent_sleep_time
 Date:		August 2017
diff --git linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-fs-xfs linux-libre-6.6.147-gnu/Documentation/ABI/testing/sysfs-fs-xfs
index f704925f6fe93..82d8e2f79834b 100644
--- linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-fs-xfs
+++ linux-libre-6.6.147-gnu/Documentation/ABI/testing/sysfs-fs-xfs
@@ -1,7 +1,7 @@
 What:		/sys/fs/xfs/<disk>/log/log_head_lsn
 Date:		July 2014
 KernelVersion:	3.17
-Contact:	xfs@oss.sgi.com
+Contact:	linux-xfs@vger.kernel.org
 Description:
 		The log sequence number (LSN) of the current head of the
 		log. The LSN is exported in "cycle:basic block" format.
@@ -10,7 +10,7 @@ Users:		xfstests
 What:		/sys/fs/xfs/<disk>/log/log_tail_lsn
 Date:		July 2014
 KernelVersion:	3.17
-Contact:	xfs@oss.sgi.com
+Contact:	linux-xfs@vger.kernel.org
 Description:
 		The log sequence number (LSN) of the current tail of the
 		log. The LSN is exported in "cycle:basic block" format.
@@ -18,7 +18,7 @@ Description:
 What:		/sys/fs/xfs/<disk>/log/reserve_grant_head
 Date:		July 2014
 KernelVersion:	3.17
-Contact:	xfs@oss.sgi.com
+Contact:	linux-xfs@vger.kernel.org
 Description:
 		The current state of the log reserve grant head. It
 		represents the total log reservation of all currently
@@ -29,7 +29,7 @@ Users:		xfstests
 What:		/sys/fs/xfs/<disk>/log/write_grant_head
 Date:		July 2014
 KernelVersion:	3.17
-Contact:	xfs@oss.sgi.com
+Contact:	linux-xfs@vger.kernel.org
 Description:
 		The current state of the log write grant head. It
 		represents the total log reservation of all currently
diff --git linux-libre-6.6-gnu/Documentation/PCI/endpoint/pci-vntb-howto.rst linux-libre-6.6.147-gnu/Documentation/PCI/endpoint/pci-vntb-howto.rst
index 70d3bc90893f3..949c0d35694c2 100644
--- linux-libre-6.6-gnu/Documentation/PCI/endpoint/pci-vntb-howto.rst
+++ linux-libre-6.6.147-gnu/Documentation/PCI/endpoint/pci-vntb-howto.rst
@@ -52,14 +52,14 @@ pci-epf-vntb device, the following commands can be used::
 	# cd /sys/kernel/config/pci_ep/
 	# mkdir functions/pci_epf_vntb/func1
 
-The "mkdir func1" above creates the pci-epf-ntb function device that will
+The "mkdir func1" above creates the pci-epf-vntb function device that will
 be probed by pci_epf_vntb driver.
 
 The PCI endpoint framework populates the directory with the following
 configurable fields::
 
-	# ls functions/pci_epf_ntb/func1
-	baseclass_code    deviceid          msi_interrupts    pci-epf-ntb.0
+	# ls functions/pci_epf_vntb/func1
+	baseclass_code    deviceid          msi_interrupts    pci-epf-vntb.0
 	progif_code       secondary         subsys_id         vendorid
 	cache_line_size   interrupt_pin     msix_interrupts   primary
 	revid             subclass_code     subsys_vendor_id
@@ -106,13 +106,13 @@ A sample configuration for virtual NTB driver for virtual PCI bus::
 	# echo 0x080A > functions/pci_epf_vntb/func1/pci_epf_vntb.0/vntb_pid
 	# echo 0x10 > functions/pci_epf_vntb/func1/pci_epf_vntb.0/vbus_number
 
-Binding pci-epf-ntb Device to EP Controller
+Binding pci-epf-vntb Device to EP Controller
 --------------------------------------------
 
 NTB function device should be attached to PCI endpoint controllers
 connected to the host.
 
-	# ln -s controllers/5f010000.pcie_ep functions/pci-epf-ntb/func1/primary
+	# ln -s controllers/5f010000.pcie_ep functions/pci_epf_vntb/func1/primary
 
 Once the above step is completed, the PCI endpoint controllers are ready to
 establish a link with the host.
@@ -134,7 +134,7 @@ lspci Output at Host side
 -------------------------
 
 Note that the devices listed here correspond to the values populated in
-"Creating pci-epf-ntb Device" section above::
+"Creating pci-epf-vntb Device" section above::
 
 	# lspci
         00:00.0 PCI bridge: Freescale Semiconductor Inc Device 0000 (rev 01)
@@ -147,7 +147,7 @@ lspci Output at EP Side / Virtual PCI bus
 -----------------------------------------
 
 Note that the devices listed here correspond to the values populated in
-"Creating pci-epf-ntb Device" section above::
+"Creating pci-epf-vntb Device" section above::
 
         # lspci
         10:00.0 Unassigned class [ffff]: Dawicontrol Computersysteme GmbH Device 1234 (rev ff)
diff --git linux-libre-6.6-gnu/Documentation/RCU/stallwarn.rst linux-libre-6.6.147-gnu/Documentation/RCU/stallwarn.rst
index ca7b7cd806a16..30080ff6f4062 100644
--- linux-libre-6.6-gnu/Documentation/RCU/stallwarn.rst
+++ linux-libre-6.6.147-gnu/Documentation/RCU/stallwarn.rst
@@ -249,7 +249,7 @@ ticks this GP)" indicates that this CPU has not taken any scheduling-clock
 interrupts during the current stalled grace period.
 
 The "idle=" portion of the message prints the dyntick-idle state.
-The hex number before the first "/" is the low-order 12 bits of the
+The hex number before the first "/" is the low-order 16 bits of the
 dynticks counter, which will have an even-numbered value if the CPU
 is in dyntick-idle mode and an odd-numbered value otherwise.  The hex
 number between the two "/"s is the value of the nesting, which will be
diff --git linux-libre-6.6-gnu/Documentation/admin-guide/abi-obsolete.rst linux-libre-6.6.147-gnu/Documentation/admin-guide/abi-obsolete.rst
index d095867899c59..594e697aa1b2f 100644
--- linux-libre-6.6-gnu/Documentation/admin-guide/abi-obsolete.rst
+++ linux-libre-6.6.147-gnu/Documentation/admin-guide/abi-obsolete.rst
@@ -7,5 +7,5 @@ marked to be removed at some later point in time.
 The description of the interface will document the reason why it is
 obsolete and when it can be expected to be removed.
 
-.. kernel-abi:: $srctree/Documentation/ABI/obsolete
+.. kernel-abi:: ABI/obsolete
    :rst:
diff --git linux-libre-6.6-gnu/Documentation/admin-guide/abi-removed.rst linux-libre-6.6.147-gnu/Documentation/admin-guide/abi-removed.rst
index f7e9e43023c13..f9e000c81828e 100644
--- linux-libre-6.6-gnu/Documentation/admin-guide/abi-removed.rst
+++ linux-libre-6.6.147-gnu/Documentation/admin-guide/abi-removed.rst
@@ -1,5 +1,5 @@
 ABI removed symbols
 ===================
 
-.. kernel-abi:: $srctree/Documentation/ABI/removed
+.. kernel-abi:: ABI/removed
    :rst:
diff --git linux-libre-6.6-gnu/Documentation/admin-guide/abi-stable.rst linux-libre-6.6.147-gnu/Documentation/admin-guide/abi-stable.rst
index 70490736e0d30..fc3361d847b12 100644
--- linux-libre-6.6-gnu/Documentation/admin-guide/abi-stable.rst
+++ linux-libre-6.6.147-gnu/Documentation/admin-guide/abi-stable.rst
@@ -10,5 +10,5 @@ for at least 2 years.
 Most interfaces (like syscalls) are expected to never change and always
 be available.
 
-.. kernel-abi:: $srctree/Documentation/ABI/stable
+.. kernel-abi:: ABI/stable
    :rst:
diff --git linux-libre-6.6-gnu/Documentation/admin-guide/abi-testing.rst linux-libre-6.6.147-gnu/Documentation/admin-guide/abi-testing.rst
index b205b16a72d08..19767926b3440 100644
--- linux-libre-6.6-gnu/Documentation/admin-guide/abi-testing.rst
+++ linux-libre-6.6.147-gnu/Documentation/admin-guide/abi-testing.rst
@@ -16,5 +16,5 @@ Programs that use these interfaces are strongly encouraged to add their
 name to the description of these interfaces, so that the kernel
 developers can easily notify them if any changes occur.
 
-.. kernel-abi:: $srctree/Documentation/ABI/testing
+.. kernel-abi:: ABI/testing
    :rst:
diff --git linux-libre-6.6-gnu/Documentation/admin-guide/blockdev/zram.rst linux-libre-6.6.147-gnu/Documentation/admin-guide/blockdev/zram.rst
index e4551579cb128..ee2b0030d4168 100644
--- linux-libre-6.6-gnu/Documentation/admin-guide/blockdev/zram.rst
+++ linux-libre-6.6.147-gnu/Documentation/admin-guide/blockdev/zram.rst
@@ -328,7 +328,7 @@ as idle::
 From now on, any pages on zram are idle pages. The idle mark
 will be removed until someone requests access of the block.
 IOW, unless there is access request, those pages are still idle pages.
-Additionally, when CONFIG_ZRAM_MEMORY_TRACKING is enabled pages can be
+Additionally, when CONFIG_ZRAM_TRACK_ENTRY_ACTIME is enabled pages can be
 marked as idle based on how long (in seconds) it's been since they were
 last accessed::
 
diff --git linux-libre-6.6-gnu/Documentation/admin-guide/cgroup-v2.rst linux-libre-6.6.147-gnu/Documentation/admin-guide/cgroup-v2.rst
index b26b5274eaaf1..622a7f28db1fd 100644
--- linux-libre-6.6-gnu/Documentation/admin-guide/cgroup-v2.rst
+++ linux-libre-6.6.147-gnu/Documentation/admin-guide/cgroup-v2.rst
@@ -1532,6 +1532,15 @@ PAGE_SIZE multiple when read back.
 		collapsing an existing range of pages. This counter is not
 		present when CONFIG_TRANSPARENT_HUGEPAGE is not set.
 
+	  thp_swpout (npn)
+		Number of transparent hugepages which are swapout in one piece
+		without splitting.
+
+	  thp_swpout_fallback (npn)
+		Number of transparent hugepages which were split before swapout.
+		Usually because failed to allocate some continuous swap space
+		for the huge page.
+
   memory.numa_stat
 	A read-only nested-keyed file which exists on non-root cgroups.
 
diff --git linux-libre-6.6-gnu/Documentation/admin-guide/cifs/usage.rst linux-libre-6.6.147-gnu/Documentation/admin-guide/cifs/usage.rst
index 5f936b4b60188..3de599cf0779a 100644
--- linux-libre-6.6-gnu/Documentation/admin-guide/cifs/usage.rst
+++ linux-libre-6.6.147-gnu/Documentation/admin-guide/cifs/usage.rst
@@ -722,40 +722,26 @@ Configuration pseudo-files:
 ======================= =======================================================
 SecurityFlags		Flags which control security negotiation and
 			also packet signing. Authentication (may/must)
-			flags (e.g. for NTLM and/or NTLMv2) may be combined with
+			flags (e.g. for NTLMv2) may be combined with
 			the signing flags.  Specifying two different password
 			hashing mechanisms (as "must use") on the other hand
 			does not make much sense. Default flags are::
 
-				0x07007
-
-			(NTLM, NTLMv2 and packet signing allowed).  The maximum
-			allowable flags if you want to allow mounts to servers
-			using weaker password hashes is 0x37037 (lanman,
-			plaintext, ntlm, ntlmv2, signing allowed).  Some
-			SecurityFlags require the corresponding menuconfig
-			options to be enabled.  Enabling plaintext
-			authentication currently requires also enabling
-			lanman authentication in the security flags
-			because the cifs module only supports sending
-			laintext passwords using the older lanman dialect
-			form of the session setup SMB.  (e.g. for authentication
-			using plain text passwords, set the SecurityFlags
-			to 0x30030)::
+				0x00C5
+
+			(NTLMv2 and packet signing allowed).  Some SecurityFlags
+			may require enabling a corresponding menuconfig option.
 
 			  may use packet signing			0x00001
 			  must use packet signing			0x01001
-			  may use NTLM (most common password hash)	0x00002
-			  must use NTLM					0x02002
 			  may use NTLMv2				0x00004
 			  must use NTLMv2				0x04004
-			  may use Kerberos security			0x00008
-			  must use Kerberos				0x08008
-			  may use lanman (weak) password hash		0x00010
-			  must use lanman password hash			0x10010
-			  may use plaintext passwords			0x00020
-			  must use plaintext passwords			0x20020
-			  (reserved for future packet encryption)	0x00040
+			  may use Kerberos security (krb5)		0x00008
+			  must use Kerberos                             0x08008
+			  may use NTLMSSP               		0x00080
+			  must use NTLMSSP           			0x80080
+			  seal (packet encryption)			0x00040
+			  must seal                                     0x40040
 
 cifsFYI			If set to non-zero value, additional debug information
 			will be logged to the system error log.  This field
diff --git linux-libre-6.6-gnu/Documentation/admin-guide/features.rst linux-libre-6.6.147-gnu/Documentation/admin-guide/features.rst
index 8c167082a84f9..7651eca38227d 100644
--- linux-libre-6.6-gnu/Documentation/admin-guide/features.rst
+++ linux-libre-6.6.147-gnu/Documentation/admin-guide/features.rst
@@ -1,3 +1,3 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-.. kernel-feat:: $srctree/Documentation/features
+.. kernel-feat:: features
diff --git linux-libre-6.6-gnu/Documentation/admin-guide/hw-vuln/core-scheduling.rst linux-libre-6.6.147-gnu/Documentation/admin-guide/hw-vuln/core-scheduling.rst
index cf1eeefdfc32f..a92e10ec402e7 100644
--- linux-libre-6.6-gnu/Documentation/admin-guide/hw-vuln/core-scheduling.rst
+++ linux-libre-6.6.147-gnu/Documentation/admin-guide/hw-vuln/core-scheduling.rst
@@ -67,8 +67,8 @@ arg4:
     will be performed for all tasks in the task group of ``pid``.
 
 arg5:
-    userspace pointer to an unsigned long for storing the cookie returned by
-    ``PR_SCHED_CORE_GET`` command. Should be 0 for all other commands.
+    userspace pointer to an unsigned long long for storing the cookie returned
+    by ``PR_SCHED_CORE_GET`` command. Should be 0 for all other commands.
 
 In order for a process to push a cookie to, or pull a cookie from a process, it
 is required to have the ptrace access mode: `PTRACE_MODE_READ_REALCREDS` to the
diff --git linux-libre-6.6-gnu/Documentation/admin-guide/hw-vuln/index.rst linux-libre-6.6.147-gnu/Documentation/admin-guide/hw-vuln/index.rst
index de99caabf65a3..5d6c001b8a988 100644
--- linux-libre-6.6-gnu/Documentation/admin-guide/hw-vuln/index.rst
+++ linux-libre-6.6.147-gnu/Documentation/admin-guide/hw-vuln/index.rst
@@ -21,3 +21,6 @@ are configurable at compile, boot or run time.
    cross-thread-rsb
    srso
    gather_data_sampling
+   reg-file-data-sampling
+   indirect-target-selection
+   vmscape
diff --git linux-libre-6.6-gnu/Documentation/admin-guide/hw-vuln/indirect-target-selection.rst linux-libre-6.6.147-gnu/Documentation/admin-guide/hw-vuln/indirect-target-selection.rst
new file mode 100644
index 0000000000000..52fed64bfb780
--- /dev/null
+++ linux-libre-6.6.147-gnu/Documentation/admin-guide/hw-vuln/indirect-target-selection.rst
@@ -0,0 +1,166 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Indirect Target Selection (ITS)
+===============================
+
+ITS is a vulnerability in some Intel CPUs that support Enhanced IBRS and were
+released before Alder Lake. ITS may allow an attacker to control the prediction
+of indirect branches and RETs located in the lower half of a cacheline.
+
+ITS is assigned CVE-2024-28956 with a CVSS score of 4.7 (Medium).
+
+Scope of Impact
+---------------
+- **eIBRS Guest/Host Isolation**: Indirect branches in KVM/kernel may still be
+  predicted with unintended target corresponding to a branch in the guest.
+
+- **Intra-Mode BTI**: In-kernel training such as through cBPF or other native
+  gadgets.
+
+- **Indirect Branch Prediction Barrier (IBPB)**: After an IBPB, indirect
+  branches may still be predicted with targets corresponding to direct branches
+  executed prior to the IBPB. /*(DEBLOBBED)*/
+
+Affected CPUs
+-------------
+Below is the list of ITS affected CPUs [#f2]_ [#f3]_:
+
+   ========================  ============  ====================  ===============
+   Common name               Family_Model  eIBRS                 Intra-mode BTI
+                                           Guest/Host Isolation
+   ========================  ============  ====================  ===============
+   SKYLAKE_X (step >= 6)     06_55H        Affected              Affected
+   ICELAKE_X                 06_6AH        Not affected          Affected
+   ICELAKE_D                 06_6CH        Not affected          Affected
+   ICELAKE_L                 06_7EH        Not affected          Affected
+   TIGERLAKE_L               06_8CH        Not affected          Affected
+   TIGERLAKE                 06_8DH        Not affected          Affected
+   KABYLAKE_L (step >= 12)   06_8EH        Affected              Affected
+   KABYLAKE (step >= 13)     06_9EH        Affected              Affected
+   COMETLAKE                 06_A5H        Affected              Affected
+   COMETLAKE_L               06_A6H        Affected              Affected
+   ROCKETLAKE                06_A7H        Not affected          Affected
+   ========================  ============  ====================  ===============
+
+- All affected CPUs enumerate Enhanced IBRS feature.
+- IBPB isolation is affected on all ITS affected CPUs, and need a microcode
+  update for mitigation.
+- None of the affected CPUs enumerate BHI_CTRL which was introduced in Golden
+  Cove (Alder Lake and Sapphire Rapids). This can help guests to determine the
+  host's affected status.
+- Intel Atom CPUs are not affected by ITS.
+
+Mitigation
+----------
+As only the indirect branches and RETs that have their last byte of instruction
+in the lower half of the cacheline are vulnerable to ITS, the basic idea behind
+the mitigation is to not allow indirect branches in the lower half.
+
+This is achieved by relying on existing retpoline support in the kernel, and in
+compilers. ITS-vulnerable retpoline sites are runtime patched to point to newly
+added ITS-safe thunks. These safe thunks consists of indirect branch in the
+second half of the cacheline. Not all retpoline sites are patched to thunks, if
+a retpoline site is evaluated to be ITS-safe, it is replaced with an inline
+indirect branch.
+
+Dynamic thunks
+~~~~~~~~~~~~~~
+From a dynamically allocated pool of safe-thunks, each vulnerable site is
+replaced with a new thunk, such that they get a unique address. This could
+improve the branch prediction accuracy. Also, it is a defense-in-depth measure
+against aliasing.
+
+Note, for simplicity, indirect branches in eBPF programs are always replaced
+with a jump to a static thunk in __x86_indirect_its_thunk_array. If required,
+in future this can be changed to use dynamic thunks.
+
+All vulnerable RETs are replaced with a static thunk, they do not use dynamic
+thunks. This is because RETs get their prediction from RSB mostly that does not
+depend on source address. RETs that underflow RSB may benefit from dynamic
+thunks. But, RETs significantly outnumber indirect branches, and any benefit
+from a unique source address could be outweighed by the increased icache
+footprint and iTLB pressure.
+
+Retpoline
+~~~~~~~~~
+Retpoline sequence also mitigates ITS-unsafe indirect branches. For this
+reason, when retpoline is enabled, ITS mitigation only relocates the RETs to
+safe thunks. Unless user requested the RSB-stuffing mitigation.
+
+RSB Stuffing
+~~~~~~~~~~~~
+RSB-stuffing via Call Depth Tracking is a mitigation for Retbleed RSB-underflow
+attacks. And it also mitigates RETs that are vulnerable to ITS.
+
+Mitigation in guests
+^^^^^^^^^^^^^^^^^^^^
+All guests deploy ITS mitigation by default, irrespective of eIBRS enumeration
+and Family/Model of the guest. This is because eIBRS feature could be hidden
+from a guest. One exception to this is when a guest enumerates BHI_DIS_S, which
+indicates that the guest is running on an unaffected host.
+
+To prevent guests from unnecessarily deploying the mitigation on unaffected
+platforms, Intel has defined ITS_NO bit(62) in MSR IA32_ARCH_CAPABILITIES. When
+a guest sees this bit set, it should not enumerate the ITS bug. Note, this bit
+is not set by any hardware, but is **intended for VMMs to synthesize** it for
+guests as per the host's affected status.
+
+Mitigation options
+^^^^^^^^^^^^^^^^^^
+The ITS mitigation can be controlled using the "indirect_target_selection"
+kernel parameter. The available options are:
+
+   ======== ===================================================================
+   on       (default)  Deploy the "Aligned branch/return thunks" mitigation.
+	    If spectre_v2 mitigation enables retpoline, aligned-thunks are only
+	    deployed for the affected RET instructions. Retpoline mitigates
+	    indirect branches.
+
+   off      Disable ITS mitigation.
+
+   vmexit   Equivalent to "=on" if the CPU is affected by guest/host isolation
+	    part of ITS. Otherwise, mitigation is not deployed. This option is
+	    useful when host userspace is not in the threat model, and only
+	    attacks from guest to host are considered.
+
+   stuff    Deploy RSB-fill mitigation when retpoline is also deployed.
+	    Otherwise, deploy the default mitigation. When retpoline mitigation
+	    is enabled, RSB-stuffing via Call-Depth-Tracking also mitigates
+	    ITS.
+
+   force    Force the ITS bug and deploy the default mitigation.
+   ======== ===================================================================
+
+Sysfs reporting
+---------------
+
+The sysfs file showing ITS mitigation status is:
+
+  /sys/devices/system/cpu/vulnerabilities/indirect_target_selection
+
+Note, microcode mitigation status is not reported in this file.
+
+The possible values in this file are:
+
+.. list-table::
+
+   * - Not affected
+     - The processor is not vulnerable.
+   * - Vulnerable
+     - System is vulnerable and no mitigation has been applied.
+   * - Vulnerable, KVM: Not affected
+     - System is vulnerable to intra-mode BTI, but not affected by eIBRS
+       guest/host isolation.
+   * - Mitigation: Aligned branch/return thunks
+     - The mitigation is enabled, affected indirect branches and RETs are
+       relocated to safe thunks.
+   * - Mitigation: Retpolines, Stuffing RSB
+     - The mitigation is enabled using retpoline and RSB stuffing.
+
+References
+----------
+.. [#f1] /*(DEBLOBBED)*/
+
+.. [#f2] Affected Processors list - https://www.intel.com/content/www/us/en/developer/topic-technology/software-security-guidance/processors-affected-consolidated-product-cpu-model.html
+
+.. [#f3] Affected Processors list (machine readable) - https://github.com/intel/Intel-affected-processor-list
diff --git linux-libre-6.6-gnu/Documentation/admin-guide/hw-vuln/processor_mmio_stale_data.rst linux-libre-6.6.147-gnu/Documentation/admin-guide/hw-vuln/processor_mmio_stale_data.rst
index c98fd11907cc8..e916dc232b0f0 100644
--- linux-libre-6.6-gnu/Documentation/admin-guide/hw-vuln/processor_mmio_stale_data.rst
+++ linux-libre-6.6.147-gnu/Documentation/admin-guide/hw-vuln/processor_mmio_stale_data.rst
@@ -157,9 +157,7 @@ This is achieved by using the otherwise unused and obsolete VERW instruction in
 combination with a microcode update. The microcode clears the affected CPU
 buffers when the VERW instruction is executed.
 
-Kernel reuses the MDS function to invoke the buffer clearing:
-
-	mds_clear_cpu_buffers()
+Kernel does the buffer clearing with x86_clear_cpu_buffers().
 
 On MDS affected CPUs, the kernel already invokes CPU buffer clear on
 kernel/userspace, hypervisor/guest and C-state (idle) transitions. No
diff --git linux-libre-6.6-gnu/Documentation/admin-guide/hw-vuln/reg-file-data-sampling.rst linux-libre-6.6.147-gnu/Documentation/admin-guide/hw-vuln/reg-file-data-sampling.rst
new file mode 100644
index 0000000000000..0585d02b9a6cb
--- /dev/null
+++ linux-libre-6.6.147-gnu/Documentation/admin-guide/hw-vuln/reg-file-data-sampling.rst
@@ -0,0 +1,104 @@
+==================================
+Register File Data Sampling (RFDS)
+==================================
+
+Register File Data Sampling (RFDS) is a microarchitectural vulnerability that
+only affects Intel Atom parts(also branded as E-cores). RFDS may allow
+a malicious actor to infer data values previously used in floating point
+registers, vector registers, or integer registers. RFDS does not provide the
+ability to choose which data is inferred. CVE-2023-28746 is assigned to RFDS.
+
+Affected Processors
+===================
+Below is the list of affected Intel processors [#f1]_:
+
+   ===================  ============
+   Common name          Family_Model
+   ===================  ============
+   ATOM_GOLDMONT           06_5CH
+   ATOM_GOLDMONT_D         06_5FH
+   ATOM_GOLDMONT_PLUS      06_7AH
+   ATOM_TREMONT_D          06_86H
+   ATOM_TREMONT            06_96H
+   ALDERLAKE               06_97H
+   ALDERLAKE_L             06_9AH
+   ATOM_TREMONT_L          06_9CH
+   RAPTORLAKE              06_B7H
+   RAPTORLAKE_P            06_BAH
+   ATOM_GRACEMONT          06_BEH
+   RAPTORLAKE_S            06_BFH
+   ===================  ============
+
+As an exception to this table, Intel Xeon E family parts ALDERLAKE(06_97H) and
+RAPTORLAKE(06_B7H) codenamed Catlow are not affected. They are reported as
+vulnerable in Linux because they share the same family/model with an affected
+part. Unlike their affected counterparts, they do not enumerate RFDS_CLEAR or
+CPUID.HYBRID. This information could be used to distinguish between the
+affected and unaffected parts, but it is deemed not worth adding complexity as
+the reporting is fixed automatically when these parts enumerate RFDS_NO.
+
+Mitigation
+==========
+Intel released a microcode update that enables software to clear sensitive
+information using the VERW instruction. Like MDS, RFDS deploys the same
+mitigation strategy to force the CPU to clear the affected buffers before an
+attacker can extract the secrets. This is achieved by using the otherwise
+unused and obsolete VERW instruction in combination with a microcode update.
+The microcode clears the affected CPU buffers when the VERW instruction is
+executed.
+
+Mitigation points
+-----------------
+VERW is executed by the kernel before returning to user space, and by KVM
+before VMentry. None of the affected cores support SMT, so VERW is not required
+at C-state transitions.
+
+New bits in IA32_ARCH_CAPABILITIES
+----------------------------------
+Newer processors and microcode update on existing affected processors added new
+bits to IA32_ARCH_CAPABILITIES MSR. These bits can be used to enumerate
+vulnerability and mitigation capability:
+
+- Bit 27 - RFDS_NO - When set, processor is not affected by RFDS.
+- Bit 28 - RFDS_CLEAR - When set, processor is affected by RFDS, and has the
+  microcode that clears the affected buffers on VERW execution.
+
+Mitigation control on the kernel command line
+---------------------------------------------
+The kernel command line allows to control RFDS mitigation at boot time with the
+parameter "reg_file_data_sampling=". The valid arguments are:
+
+  ==========  =================================================================
+  on          If the CPU is vulnerable, enable mitigation; CPU buffer clearing
+              on exit to userspace and before entering a VM.
+  off         Disables mitigation.
+  ==========  =================================================================
+
+Mitigation default is selected by CONFIG_MITIGATION_RFDS.
+
+Mitigation status information
+-----------------------------
+The Linux kernel provides a sysfs interface to enumerate the current
+vulnerability status of the system: whether the system is vulnerable, and
+which mitigations are active. The relevant sysfs file is:
+
+	/sys/devices/system/cpu/vulnerabilities/reg_file_data_sampling
+
+The possible values in this file are:
+
+  .. list-table::
+
+     * - 'Not affected'
+       - The processor is not vulnerable
+     * - 'Vulnerable'
+       - The processor is vulnerable, but no mitigation enabled
+     * - 'Vulnerable: No microcode'
+       - The processor is vulnerable but microcode is not updated.
+     * - 'Mitigation: Clear Register File'
+       - The processor is vulnerable and the CPU buffer clearing mitigation is
+	 enabled.
+
+References
+----------
+.. [#f1] Affected Processors
+   https://www.intel.com/content/www/us/en/developer/topic-technology/software-security-guidance/processors-affected-consolidated-product-cpu-model.html
diff --git linux-libre-6.6-gnu/Documentation/admin-guide/hw-vuln/spectre.rst linux-libre-6.6.147-gnu/Documentation/admin-guide/hw-vuln/spectre.rst
index 32a8893e56177..e0a1be97fa759 100644
--- linux-libre-6.6-gnu/Documentation/admin-guide/hw-vuln/spectre.rst
+++ linux-libre-6.6.147-gnu/Documentation/admin-guide/hw-vuln/spectre.rst
@@ -138,11 +138,10 @@ associated with the source address of the indirect branch. Specifically,
 the BHB might be shared across privilege levels even in the presence of
 Enhanced IBRS.
 
-Currently the only known real-world BHB attack vector is via
-unprivileged eBPF. Therefore, it's highly recommended to not enable
-unprivileged eBPF, especially when eIBRS is used (without retpolines).
-For a full mitigation against BHB attacks, it's recommended to use
-retpolines (or eIBRS combined with retpolines).
+Previously the only known real-world BHB attack vector was via unprivileged
+eBPF. Further research has found attacks that don't require unprivileged eBPF.
+For a full mitigation against BHB attacks it is recommended to set BHI_DIS_S or
+use the BHB clearing sequence.
 
 Attack scenarios
 ----------------
@@ -430,6 +429,23 @@ The possible values in this file are:
   'PBRSB-eIBRS: Not affected'  CPU is not affected by PBRSB
   ===========================  =======================================================
 
+  - Branch History Injection (BHI) protection status:
+
+.. list-table::
+
+ * - BHI: Not affected
+   - System is not affected
+ * - BHI: Retpoline
+   - System is protected by retpoline
+ * - BHI: BHI_DIS_S
+   - System is protected by BHI_DIS_S
+ * - BHI: SW loop, KVM SW loop
+   - System is protected by software clearing sequence
+ * - BHI: Vulnerable
+   - System is vulnerable to BHI
+ * - BHI: Vulnerable, KVM: SW loop
+   - System is vulnerable; KVM is protected by software clearing sequence
+
 Full mitigation might require a microcode update from the CPU
 vendor. When the necessary microcode is not available, the kernel will
 report vulnerability.
@@ -484,7 +500,11 @@ Spectre variant 2
 
    Systems which support enhanced IBRS (eIBRS) enable IBRS protection once at
    boot, by setting the IBRS bit, and they're automatically protected against
-   Spectre v2 variant attacks.
+   some Spectre v2 variant attacks. The BHB can still influence the choice of
+   indirect branch predictor entry, and although branch predictor entries are
+   isolated between modes when eIBRS is enabled, the BHB itself is not isolated
+   between modes. Systems which support BHI_DIS_S will set it to protect against
+   BHI attacks.
 
    On Intel's enhanced IBRS systems, this includes cross-thread branch target
    injections on SMT systems (STIBP). In other words, Intel eIBRS enables
@@ -638,6 +658,18 @@ kernel command line.
 		spectre_v2=off. Spectre variant 1 mitigations
 		cannot be disabled.
 
+	spectre_bhi=
+
+		[X86] Control mitigation of Branch History Injection
+		(BHI) vulnerability.  This setting affects the deployment
+		of the HW BHI control and the SW BHB clearing sequence.
+
+		on
+			(default) Enable the HW or SW mitigation as
+			needed.
+		off
+			Disable the mitigation.
+
 For spectre_v2_user see Documentation/admin-guide/kernel-parameters.txt
 
 Mitigation selection guide
diff --git linux-libre-6.6-gnu/Documentation/admin-guide/hw-vuln/srso.rst linux-libre-6.6.147-gnu/Documentation/admin-guide/hw-vuln/srso.rst
index b6cfb51cb0b46..e715bfc09879a 100644
--- linux-libre-6.6-gnu/Documentation/admin-guide/hw-vuln/srso.rst
+++ linux-libre-6.6.147-gnu/Documentation/admin-guide/hw-vuln/srso.rst
@@ -46,12 +46,22 @@ The possible values in this file are:
 
    The processor is not vulnerable
 
- * 'Vulnerable: no microcode':
+* 'Vulnerable':
+
+   The processor is vulnerable and no mitigations have been applied.
+
+ * 'Vulnerable: No microcode':
 
    The processor is vulnerable, no microcode extending IBPB
    functionality to address the vulnerability has been applied.
 
- * 'Mitigation: microcode':
+ * 'Vulnerable: Safe RET, no microcode':
+
+   The "Safe RET" mitigation (see below) has been applied to protect the
+   kernel, but the IBPB-extending microcode has not been applied.  User
+   space tasks may still be vulnerable.
+
+ * 'Vulnerable: Microcode, no safe RET':
 
    Extended IBPB functionality microcode patch has been applied. It does
    not address User->Kernel and Guest->Host transitions protection but it
@@ -72,11 +82,11 @@ The possible values in this file are:
 
    (spec_rstack_overflow=microcode)
 
- * 'Mitigation: safe RET':
+ * 'Mitigation: Safe RET':
 
-   Software-only mitigation. It complements the extended IBPB microcode
-   patch functionality by addressing User->Kernel and Guest->Host
-   transitions protection.
+   Combined microcode/software mitigation. It complements the
+   extended IBPB microcode patch functionality by addressing
+   User->Kernel and Guest->Host transitions protection.
 
    Selected by default or by spec_rstack_overflow=safe-ret
 
@@ -129,7 +139,7 @@ an indrect branch prediction barrier after having applied the required
 microcode patch for one's system. This mitigation comes also at
 a performance cost.
 
-Mitigation: safe RET
+Mitigation: Safe RET
 --------------------
 
 The mitigation works by ensuring all RET instructions speculate to
diff --git linux-libre-6.6-gnu/Documentation/admin-guide/hw-vuln/vmscape.rst linux-libre-6.6.147-gnu/Documentation/admin-guide/hw-vuln/vmscape.rst
new file mode 100644
index 0000000000000..d9b9a2b6c114c
--- /dev/null
+++ linux-libre-6.6.147-gnu/Documentation/admin-guide/hw-vuln/vmscape.rst
@@ -0,0 +1,110 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+VMSCAPE
+=======
+
+VMSCAPE is a vulnerability that may allow a guest to influence the branch
+prediction in host userspace. It particularly affects hypervisors like QEMU.
+
+Even if a hypervisor may not have any sensitive data like disk encryption keys,
+guest-userspace may be able to attack the guest-kernel using the hypervisor as
+a confused deputy.
+
+Affected processors
+-------------------
+
+The following CPU families are affected by VMSCAPE:
+
+**Intel processors:**
+  - Skylake generation (Parts without Enhanced-IBRS)
+  - Cascade Lake generation - (Parts affected by ITS guest/host separation)
+  - Alder Lake and newer (Parts affected by BHI)
+
+Note that, BHI affected parts that use BHB clearing software mitigation e.g.
+Icelake are not vulnerable to VMSCAPE.
+
+**AMD processors:**
+  - Zen series (families 0x17, 0x19, 0x1a)
+
+** Hygon processors:**
+ - Family 0x18
+
+Mitigation
+----------
+
+Conditional IBPB
+----------------
+
+Kernel tracks when a CPU has run a potentially malicious guest and issues an
+IBPB before the first exit to userspace after VM-exit. If userspace did not run
+between VM-exit and the next VM-entry, no IBPB is issued.
+
+Note that the existing userspace mitigation against Spectre-v2 is effective in
+protecting the userspace. They are insufficient to protect the userspace VMMs
+from a malicious guest. This is because Spectre-v2 mitigations are applied at
+context switch time, while the userspace VMM can run after a VM-exit without a
+context switch.
+
+Vulnerability enumeration and mitigation is not applied inside a guest. This is
+because nested hypervisors should already be deploying IBPB to isolate
+themselves from nested guests.
+
+SMT considerations
+------------------
+
+When Simultaneous Multi-Threading (SMT) is enabled, hypervisors can be
+vulnerable to cross-thread attacks. For complete protection against VMSCAPE
+attacks in SMT environments, STIBP should be enabled.
+
+The kernel will issue a warning if SMT is enabled without adequate STIBP
+protection. Warning is not issued when:
+
+- SMT is disabled
+- STIBP is enabled system-wide
+- Intel eIBRS is enabled (which implies STIBP protection)
+
+System information and options
+------------------------------
+
+The sysfs file showing VMSCAPE mitigation status is:
+
+  /sys/devices/system/cpu/vulnerabilities/vmscape
+
+The possible values in this file are:
+
+ * 'Not affected':
+
+   The processor is not vulnerable to VMSCAPE attacks.
+
+ * 'Vulnerable':
+
+   The processor is vulnerable and no mitigation has been applied.
+
+ * 'Mitigation: IBPB before exit to userspace':
+
+   Conditional IBPB mitigation is enabled. The kernel tracks when a CPU has
+   run a potentially malicious guest and issues an IBPB before the first
+   exit to userspace after VM-exit.
+
+ * 'Mitigation: IBPB on VMEXIT':
+
+   IBPB is issued on every VM-exit. This occurs when other mitigations like
+   RETBLEED or SRSO are already issuing IBPB on VM-exit.
+
+Mitigation control on the kernel command line
+----------------------------------------------
+
+The mitigation can be controlled via the ``vmscape=`` command line parameter:
+
+ * ``vmscape=off``:
+
+   Disable the VMSCAPE mitigation.
+
+ * ``vmscape=ibpb``:
+
+   Enable conditional IBPB mitigation (default when CONFIG_MITIGATION_VMSCAPE=y).
+
+ * ``vmscape=force``:
+
+   Force vulnerability detection and mitigation even on processors that are
+   not known to be affected.
diff --git linux-libre-6.6-gnu/Documentation/admin-guide/kdump/vmcoreinfo.rst linux-libre-6.6.147-gnu/Documentation/admin-guide/kdump/vmcoreinfo.rst
index 599e8d3bcbc31..9235cf4fbabff 100644
--- linux-libre-6.6-gnu/Documentation/admin-guide/kdump/vmcoreinfo.rst
+++ linux-libre-6.6.147-gnu/Documentation/admin-guide/kdump/vmcoreinfo.rst
@@ -172,7 +172,7 @@ variables.
 Offset of the free_list's member. This value is used to compute the number
 of free pages.
 
-Each zone has a free_area structure array called free_area[MAX_ORDER + 1].
+Each zone has a free_area structure array called free_area[NR_PAGE_ORDERS].
 The free_list represents a linked list of free page blocks.
 
 (list_head, next|prev)
@@ -189,8 +189,8 @@ Offsets of the vmap_area's members. They carry vmalloc-specific
 information. Makedumpfile gets the start address of the vmalloc region
 from this.
 
-(zone.free_area, MAX_ORDER + 1)
--------------------------------
+(zone.free_area, NR_PAGE_ORDERS)
+--------------------------------
 
 Free areas descriptor. User-space tools use this value to iterate the
 free_area ranges. MAX_ORDER is used by the zone buddy allocator.
diff --git linux-libre-6.6-gnu/Documentation/admin-guide/kernel-parameters.txt linux-libre-6.6.147-gnu/Documentation/admin-guide/kernel-parameters.txt
index 0a1731a0f0ef3..fdbc2749fbb37 100644
--- linux-libre-6.6-gnu/Documentation/admin-guide/kernel-parameters.txt
+++ linux-libre-6.6.147-gnu/Documentation/admin-guide/kernel-parameters.txt
@@ -664,12 +664,6 @@
 			loops can be debugged more effectively on production
 			systems.
 
-	clocksource.max_cswd_read_retries= [KNL]
-			Number of clocksource_watchdog() retries due to
-			external delays before the clock will be marked
-			unstable.  Defaults to two retries, that is,
-			three attempts to read the clock under test.
-
 	clocksource.verify_n_cpus= [KNL]
 			Limit the number of CPUs checked for clocksources
 			marked with CLOCK_SOURCE_VERIFY_PERCPU that
@@ -1133,6 +1127,26 @@
 			The filter can be disabled or changed to another
 			driver later using sysfs.
 
+	reg_file_data_sampling=
+			[X86] Controls mitigation for Register File Data
+			Sampling (RFDS) vulnerability. RFDS is a CPU
+			vulnerability which may allow userspace to infer
+			kernel data values previously stored in floating point
+			registers, vector registers, or integer registers.
+			RFDS only affects Intel Atom processors.
+
+			on:	Turns ON the mitigation.
+			off:	Turns OFF the mitigation.
+
+			This parameter overrides the compile time default set
+			by CONFIG_MITIGATION_RFDS. Mitigation cannot be
+			disabled when other VERW based mitigations (like MDS)
+			are enabled. In order to disable RFDS mitigation all
+			VERW based mitigations need to be disabled.
+
+			For details see:
+			Documentation/admin-guide/hw-vuln/reg-file-data-sampling.rst
+
 	driver_async_probe=  [KNL]
 			List of driver names to be probed asynchronously. *
 			matches with all driver names. If * is specified, the
@@ -2046,6 +2060,23 @@
 			different crypto accelerators. This option can be used
 			to achieve best performance for particular HW.
 
+	indirect_target_selection= [X86,Intel] Mitigation control for Indirect
+			Target Selection(ITS) bug in Intel CPUs. Updated
+			microcode is also required for a fix in IBPB.
+
+			on:     Enable mitigation (default).
+			off:    Disable mitigation.
+			force:	Force the ITS bug and deploy default
+				mitigation.
+			vmexit: Only deploy mitigation if CPU is affected by
+				guest/host isolation part of ITS.
+			stuff:	Deploy RSB-fill mitigation when retpoline is
+				also deployed. Otherwise, deploy the default
+				mitigation.
+
+			For details see:
+			Documentation/admin-guide/hw-vuln/indirect-target-selection.rst
+
 	init=		[KNL]
 			Format: <full_path>
 			Run specified binary instead of /sbin/init as init
@@ -3249,9 +3280,7 @@
 
 	mem_encrypt=	[X86-64] AMD Secure Memory Encryption (SME) control
 			Valid arguments: on, off
-			Default (depends on kernel configuration option):
-			  on  (CONFIG_AMD_MEM_ENCRYPT_ACTIVE_BY_DEFAULT=y)
-			  off (CONFIG_AMD_MEM_ENCRYPT_ACTIVE_BY_DEFAULT=n)
+			Default: off
 			mem_encrypt=on:		Activate SME
 			mem_encrypt=off:	Do not activate SME
 
@@ -3275,6 +3304,11 @@
 
 	mga=		[HW,DRM]
 
+	microcode.force_minrev=	[X86]
+			Format: <bool>
+			Enable or disable the microcode minimal revision
+			enforcement for the runtime microcode loader.
+
 	min_addr=nn[KMG]	[KNL,BOOT,IA-64] All physical memory below this
 			physical address is ignored.
 
@@ -3305,12 +3339,16 @@
 			arch-independent options, each of which is an
 			aggregation of existing arch-specific options.
 
+			Note, "mitigations" is supported if and only if the
+			kernel was built with CPU_MITIGATIONS=y.
+
 			off
 				Disable all optional CPU mitigations.  This
 				improves system performance, but it may also
 				expose users to several CPU vulnerabilities.
 				Equivalent to: if nokaslr then kpti=0 [ARM64]
 					       gather_data_sampling=off [X86]
+					       indirect_target_selection=off [X86]
 					       kvm.nx_huge_pages=off [X86]
 					       l1tf=off [X86]
 					       mds=off [X86]
@@ -3322,12 +3360,15 @@
 					       nospectre_bhb [ARM64]
 					       nospectre_v1 [X86,PPC]
 					       nospectre_v2 [X86,PPC,S390,ARM64]
+					       reg_file_data_sampling=off [X86]
 					       retbleed=off [X86]
 					       spec_store_bypass_disable=off [X86,PPC]
+					       spectre_bhi=off [X86]
 					       spectre_v2_user=off [X86]
 					       srbds=off [X86,INTEL]
 					       ssbd=force-off [ARM64]
 					       tsx_async_abort=off [X86]
+					       vmscape=off [X86]
 
 				Exceptions:
 					       This does not have any effect on
@@ -4622,6 +4663,16 @@
 	printk.time=	Show timing data prefixed to each printk message line
 			Format: <bool>  (1/Y/y=enable, 0/N/n=disable)
 
+	proc_mem.force_override= [KNL]
+			Format: {always | ptrace | never}
+			Traditionally /proc/pid/mem allows memory permissions to be
+			overridden without restrictions. This option may be set to
+			restrict that. Can be one of:
+			- 'always': traditional behavior always allows mem overrides.
+			- 'ptrace': only allow mem overrides for active ptracers.
+			- 'never':  never allow mem overrides.
+			If not specified, default is the CONFIG_PROC_MEM_* choice.
+
 	processor.max_cstate=	[HW,ACPI]
 			Limit processor to maximum C-state
 			max_cstate=9 overrides any DMI blacklist limit.
@@ -4632,11 +4683,9 @@
 
 	profile=	[KNL] Enable kernel profiling via /proc/profile
 			Format: [<profiletype>,]<number>
-			Param: <profiletype>: "schedule", "sleep", or "kvm"
+			Param: <profiletype>: "schedule" or "kvm"
 				[defaults to kernel profiling]
 			Param: "schedule" - profile schedule points.
-			Param: "sleep" - profile D-state sleeping (millisecs).
-				Requires CONFIG_SCHEDSTATS
 			Param: "kvm" - profile VM exits.
 			Param: <number> - step/bucket size as a power of 2 for
 				statistical time based profiling.
@@ -5589,6 +5638,9 @@
 
 	rootflags=	[KNL] Set root filesystem mount option string
 
+	initramfs_options= [KNL]
+                        Specify mount options for for the initramfs mount.
+
 	rootfstype=	[KNL] Set root filesystem type
 
 	rootwait	[KNL] Wait (indefinitely) for root device to show up.
@@ -5858,6 +5910,13 @@
 			This feature may be more efficiently disabled
 			using the csdlock_debug- kernel parameter.
 
+	smp.panic_on_ipistall= [KNL]
+			If a csd_lock_timeout extends for more than
+			the specified number of milliseconds, panic the
+			system.  By default, let CSD-lock acquisition
+			take as long as they take.  Specifying 300,000
+			for this value provides a 5-minute timeout.
+
 	smsc-ircc2.nopnp	[HW] Don't use PNP to discover SMC devices
 	smsc-ircc2.ircc_cfg=	[HW] Device configuration I/O port
 	smsc-ircc2.ircc_sir=	[HW] SIR base I/O port
@@ -5894,6 +5953,15 @@
 	sonypi.*=	[HW] Sony Programmable I/O Control Device driver
 			See Documentation/admin-guide/laptops/sonypi.rst
 
+	spectre_bhi=	[X86] Control mitigation of Branch History Injection
+			(BHI) vulnerability.  This setting affects the
+			deployment of the HW BHI control and the SW BHB
+			clearing sequence.
+
+			on   - (default) Enable the HW or SW mitigation
+			       as needed.
+			off  - Disable the mitigation.
+
 	spectre_v2=	[X86] Control mitigation of Spectre variant 2
 			(indirect branch speculation) vulnerability.
 			The default operation protects the kernel from
@@ -6581,6 +6649,19 @@
 			If not specified, "default" is used. In this case,
 			the RNG's choice is left to each individual trust source.
 
+	tsa=		[X86] Control mitigation for Transient Scheduler
+			Attacks on AMD CPUs. Search the following in your
+			favourite search engine for more details:
+
+			"Technical guidance for mitigating transient scheduler
+			attacks".
+
+			off		- disable the mitigation
+			on		- enable the mitigation (default)
+			user		- mitigate only user/kernel transitions
+			vm		- mitigate only guest/host transitions
+
+
 	tsc=		Disable clocksource stability checks for TSC.
 			Format: <string>
 			[x86] reliable: mark tsc clocksource as reliable, this
@@ -6817,6 +6898,12 @@
 					pause after every control message);
 				o = USB_QUIRK_HUB_SLOW_RESET (Hub needs extra
 					delay after resetting its port);
+				p = USB_QUIRK_SHORT_SET_ADDRESS_REQ_TIMEOUT
+					(Reduce timeout of the SET_ADDRESS
+					request from 5000 ms to 500 ms);
+				q = USB_QUIRK_FORCE_ONE_CONFIG (Device
+					claims zero configurations,
+					forcing to 1);
 			Example: quirks=0781:5580:bk,0a5c:5834:gij
 
 	usbhid.mousepoll=
@@ -6994,6 +7081,16 @@
 	vmpoff=		[KNL,S390] Perform z/VM CP command after power off.
 			Format: <command>
 
+	vmscape=	[X86] Controls mitigation for VMscape attacks.
+			VMscape attacks can leak information from a userspace
+			hypervisor to a guest via speculative side-channels.
+
+			off		- disable the mitigation
+			ibpb		- use Indirect Branch Prediction Barrier
+					  (IBPB) mitigation (default)
+			force		- force vulnerability detection even on
+					  unaffected processors
+
 	vsyscall=	[X86-64]
 			Controls the behavior of vsyscalls (i.e. calls to
 			fixed addresses of 0xffffffffff600x00 from legacy
diff --git linux-libre-6.6-gnu/Documentation/admin-guide/media/building.rst linux-libre-6.6.147-gnu/Documentation/admin-guide/media/building.rst
index a064734299163..7a413ba07f93b 100644
--- linux-libre-6.6-gnu/Documentation/admin-guide/media/building.rst
+++ linux-libre-6.6.147-gnu/Documentation/admin-guide/media/building.rst
@@ -15,7 +15,7 @@ Please notice, however, that, if:
 
 you should use the main media development tree ``master`` branch:
 
-    https://git.linuxtv.org/media_tree.git/
+    https://git.linuxtv.org/media.git/
 
 In this case, you may find some useful information at the
 `LinuxTv wiki pages <https://linuxtv.org/wiki>`_:
diff --git linux-libre-6.6-gnu/Documentation/admin-guide/media/saa7134.rst linux-libre-6.6.147-gnu/Documentation/admin-guide/media/saa7134.rst
index 51eae7eb5ab7f..18d7cbc897db4 100644
--- linux-libre-6.6-gnu/Documentation/admin-guide/media/saa7134.rst
+++ linux-libre-6.6.147-gnu/Documentation/admin-guide/media/saa7134.rst
@@ -67,7 +67,7 @@ Changes / Fixes
 Please mail to linux-media AT vger.kernel.org unified diffs against
 the linux media git tree:
 
-    https://git.linuxtv.org/media_tree.git/
+    https://git.linuxtv.org/media.git/
 
 This is done by committing a patch at a clone of the git tree and
 submitting the patch using ``git send-email``. Don't forget to
diff --git linux-libre-6.6-gnu/Documentation/admin-guide/mm/damon/reclaim.rst linux-libre-6.6.147-gnu/Documentation/admin-guide/mm/damon/reclaim.rst
index 343e25b252f43..024f4e252d247 100644
--- linux-libre-6.6-gnu/Documentation/admin-guide/mm/damon/reclaim.rst
+++ linux-libre-6.6.147-gnu/Documentation/admin-guide/mm/damon/reclaim.rst
@@ -71,6 +71,10 @@ of parametrs except ``enabled`` again.  Once the re-reading is done, this
 parameter is set as ``N``.  If invalid parameters are found while the
 re-reading, DAMON_RECLAIM will be disabled.
 
+Once ``Y`` is written to this parameter, the user must not write to any
+parameters until reading ``commit_inputs`` again returns ``N``.  If users
+violate this rule, the kernel may exhibit undefined behavior.
+
 min_age
 -------
 
diff --git linux-libre-6.6-gnu/Documentation/admin-guide/mm/damon/usage.rst linux-libre-6.6.147-gnu/Documentation/admin-guide/mm/damon/usage.rst
index 8da1b72818273..9285f69f4f735 100644
--- linux-libre-6.6-gnu/Documentation/admin-guide/mm/damon/usage.rst
+++ linux-libre-6.6.147-gnu/Documentation/admin-guide/mm/damon/usage.rst
@@ -389,7 +389,7 @@ pages of all memory cgroups except ``/having_care_already``.::
     # # further filter out all cgroups except one at '/having_care_already'
     echo memcg > 1/type
     echo /having_care_already > 1/memcg_path
-    echo N > 1/matching
+    echo Y > 1/matching
 
 Note that ``anon`` and ``memcg`` filters are currently supported only when
 ``paddr`` `implementation <sysfs_contexts>` is being used.
diff --git linux-libre-6.6-gnu/Documentation/admin-guide/pm/cpufreq.rst linux-libre-6.6.147-gnu/Documentation/admin-guide/pm/cpufreq.rst
index 6adb7988e0eb6..5247eabb92065 100644
--- linux-libre-6.6-gnu/Documentation/admin-guide/pm/cpufreq.rst
+++ linux-libre-6.6.147-gnu/Documentation/admin-guide/pm/cpufreq.rst
@@ -499,7 +499,7 @@ This governor exposes the following tunables:
 	of those tasks above 0 and set this attribute to 1.
 
 ``sampling_down_factor``
-	Temporary multiplier, between 1 (default) and 100 inclusive, to apply to
+	Temporary multiplier, between 1 (default) and 100000 inclusive, to apply to
 	the ``sampling_rate`` value if the CPU load goes above ``up_threshold``.
 
 	This causes the next execution of the governor's worker routine (after
@@ -569,8 +569,8 @@ This governor exposes the following tunables:
 	100 (5 by default).
 
 	This is how much the frequency is allowed to change in one go.  Setting
-	it to 0 will cause the default frequency step (5 percent) to be used
-	and setting it to 100 effectively causes the governor to periodically
+	it to 0 disables frequency changes by the governor entirely and setting
+	it to 100 effectively causes the governor to periodically
 	switch the frequency between the ``scaling_min_freq`` and
 	``scaling_max_freq`` policy limits.
 
diff --git linux-libre-6.6-gnu/Documentation/admin-guide/sysctl/net.rst linux-libre-6.6.147-gnu/Documentation/admin-guide/sysctl/net.rst
index 4877563241f3b..5f1748f33d9a2 100644
--- linux-libre-6.6-gnu/Documentation/admin-guide/sysctl/net.rst
+++ linux-libre-6.6.147-gnu/Documentation/admin-guide/sysctl/net.rst
@@ -205,6 +205,11 @@ Will increase power usage.
 
 Default: 0 (off)
 
+mem_pcpu_rsv
+------------
+
+Per-cpu reserved forward alloc cache size in page units. Default 1MB per CPU.
+
 rmem_default
 ------------
 
diff --git linux-libre-6.6-gnu/Documentation/arch/arc/features.rst linux-libre-6.6.147-gnu/Documentation/arch/arc/features.rst
index b793583d688a4..49ff446ff744c 100644
--- linux-libre-6.6-gnu/Documentation/arch/arc/features.rst
+++ linux-libre-6.6.147-gnu/Documentation/arch/arc/features.rst
@@ -1,3 +1,3 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-.. kernel-feat:: $srctree/Documentation/features arc
+.. kernel-feat:: features arc
diff --git linux-libre-6.6-gnu/Documentation/arch/arm/features.rst linux-libre-6.6.147-gnu/Documentation/arch/arm/features.rst
index 7414ec03dd157..0e76aaf68ecab 100644
--- linux-libre-6.6-gnu/Documentation/arch/arm/features.rst
+++ linux-libre-6.6.147-gnu/Documentation/arch/arm/features.rst
@@ -1,3 +1,3 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-.. kernel-feat:: $srctree/Documentation/features arm
+.. kernel-feat:: features arm
diff --git linux-libre-6.6-gnu/Documentation/arch/arm64/elf_hwcaps.rst linux-libre-6.6.147-gnu/Documentation/arch/arm64/elf_hwcaps.rst
index 76ff9d7398fda..f88a24d621dd4 100644
--- linux-libre-6.6-gnu/Documentation/arch/arm64/elf_hwcaps.rst
+++ linux-libre-6.6.147-gnu/Documentation/arch/arm64/elf_hwcaps.rst
@@ -174,22 +174,28 @@ HWCAP2_DCPODP
     Functionality implied by ID_AA64ISAR1_EL1.DPB == 0b0010.
 
 HWCAP2_SVE2
-    Functionality implied by ID_AA64ZFR0_EL1.SVEVer == 0b0001.
+    Functionality implied by ID_AA64PFR0_EL1.SVE == 0b0001 and
+    ID_AA64ZFR0_EL1.SVEver == 0b0001.
 
 HWCAP2_SVEAES
-    Functionality implied by ID_AA64ZFR0_EL1.AES == 0b0001.
+    Functionality implied by ID_AA64PFR0_EL1.SVE == 0b0001 and
+    ID_AA64ZFR0_EL1.AES == 0b0001.
 
 HWCAP2_SVEPMULL
-    Functionality implied by ID_AA64ZFR0_EL1.AES == 0b0010.
+    Functionality implied by ID_AA64PFR0_EL1.SVE == 0b0001 and
+    ID_AA64ZFR0_EL1.AES == 0b0010.
 
 HWCAP2_SVEBITPERM
-    Functionality implied by ID_AA64ZFR0_EL1.BitPerm == 0b0001.
+    Functionality implied by ID_AA64PFR0_EL1.SVE == 0b0001 and
+    ID_AA64ZFR0_EL1.BitPerm == 0b0001.
 
 HWCAP2_SVESHA3
-    Functionality implied by ID_AA64ZFR0_EL1.SHA3 == 0b0001.
+    Functionality implied by ID_AA64PFR0_EL1.SVE == 0b0001 and
+    ID_AA64ZFR0_EL1.SHA3 == 0b0001.
 
 HWCAP2_SVESM4
-    Functionality implied by ID_AA64ZFR0_EL1.SM4 == 0b0001.
+    Functionality implied by ID_AA64PFR0_EL1.SVE == 0b0001 and
+    ID_AA64ZFR0_EL1.SM4 == 0b0001.
 
 HWCAP2_FLAGM2
     Functionality implied by ID_AA64ISAR0_EL1.TS == 0b0010.
@@ -198,16 +204,20 @@ HWCAP2_FRINT
     Functionality implied by ID_AA64ISAR1_EL1.FRINTTS == 0b0001.
 
 HWCAP2_SVEI8MM
-    Functionality implied by ID_AA64ZFR0_EL1.I8MM == 0b0001.
+    Functionality implied by ID_AA64PFR0_EL1.SVE == 0b0001 and
+    ID_AA64ZFR0_EL1.I8MM == 0b0001.
 
 HWCAP2_SVEF32MM
-    Functionality implied by ID_AA64ZFR0_EL1.F32MM == 0b0001.
+    Functionality implied by ID_AA64PFR0_EL1.SVE == 0b0001 and
+    ID_AA64ZFR0_EL1.F32MM == 0b0001.
 
 HWCAP2_SVEF64MM
-    Functionality implied by ID_AA64ZFR0_EL1.F64MM == 0b0001.
+    Functionality implied by ID_AA64PFR0_EL1.SVE == 0b0001 and
+    ID_AA64ZFR0_EL1.F64MM == 0b0001.
 
 HWCAP2_SVEBF16
-    Functionality implied by ID_AA64ZFR0_EL1.BF16 == 0b0001.
+    Functionality implied by ID_AA64PFR0_EL1.SVE == 0b0001 and
+    ID_AA64ZFR0_EL1.BF16 == 0b0001.
 
 HWCAP2_I8MM
     Functionality implied by ID_AA64ISAR1_EL1.I8MM == 0b0001.
@@ -273,7 +283,8 @@ HWCAP2_EBF16
     Functionality implied by ID_AA64ISAR1_EL1.BF16 == 0b0010.
 
 HWCAP2_SVE_EBF16
-    Functionality implied by ID_AA64ZFR0_EL1.BF16 == 0b0010.
+    Functionality implied by ID_AA64PFR0_EL1.SVE == 0b0001 and
+    ID_AA64ZFR0_EL1.BF16 == 0b0010.
 
 HWCAP2_CSSC
     Functionality implied by ID_AA64ISAR2_EL1.CSSC == 0b0001.
@@ -282,7 +293,8 @@ HWCAP2_RPRFM
     Functionality implied by ID_AA64ISAR2_EL1.RPRFM == 0b0001.
 
 HWCAP2_SVE2P1
-    Functionality implied by ID_AA64ZFR0_EL1.SVEver == 0b0010.
+    Functionality implied by ID_AA64PFR0_EL1.SVE == 0b0001 and
+    ID_AA64ZFR0_EL1.SVEver == 0b0010.
 
 HWCAP2_SME2
     Functionality implied by ID_AA64SMFR0_EL1.SMEver == 0b0001.
diff --git linux-libre-6.6-gnu/Documentation/arch/arm64/features.rst linux-libre-6.6.147-gnu/Documentation/arch/arm64/features.rst
index dfa4cb3cd3efa..03321f4309d0b 100644
--- linux-libre-6.6-gnu/Documentation/arch/arm64/features.rst
+++ linux-libre-6.6.147-gnu/Documentation/arch/arm64/features.rst
@@ -1,3 +1,3 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-.. kernel-feat:: $srctree/Documentation/features arm64
+.. kernel-feat:: features arm64
diff --git linux-libre-6.6-gnu/Documentation/arch/arm64/silicon-errata.rst linux-libre-6.6.147-gnu/Documentation/arch/arm64/silicon-errata.rst
index f47f63bcf67c9..b5b46b6ab2778 100644
--- linux-libre-6.6-gnu/Documentation/arch/arm64/silicon-errata.rst
+++ linux-libre-6.6.147-gnu/Documentation/arch/arm64/silicon-errata.rst
@@ -54,6 +54,8 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | Ampere         | AmpereOne       | AC03_CPU_38     | AMPERE_ERRATUM_AC03_CPU_38  |
 +----------------+-----------------+-----------------+-----------------------------+
+| Ampere         | AmpereOne AC04  | AC04_CPU_10     | AMPERE_ERRATUM_AC03_CPU_38  |
++----------------+-----------------+-----------------+-----------------------------+
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A510     | #2457168        | ARM64_ERRATUM_2457168       |
 +----------------+-----------------+-----------------+-----------------------------+
@@ -71,6 +73,8 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A510     | #2658417        | ARM64_ERRATUM_2658417       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A510     | #3117295        | ARM64_ERRATUM_3117295       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A520     | #2966298        | ARM64_ERRATUM_2966298       |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A53      | #826319         | ARM64_ERRATUM_826319        |
@@ -117,32 +121,118 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A76      | #1463225        | ARM64_ERRATUM_1463225       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A76      | #3324349        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A76      | #4193800        | ARM64_ERRATUM_4118414       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A76AE    | #4193801        | ARM64_ERRATUM_4118414       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A77      | #1508412        | ARM64_ERRATUM_1508412       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A77      | #3324348        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A77      | #4193798        | ARM64_ERRATUM_4118414       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A78      | #3324344        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A78      | #4193791        | ARM64_ERRATUM_4118414       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A78AE    | #4193793        | ARM64_ERRATUM_4118414       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A78C     | #3324346,3324347| ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A78C     | #4193794        | ARM64_ERRATUM_4118414       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A710     | #2119858        | ARM64_ERRATUM_2119858       |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A710     | #2054223        | ARM64_ERRATUM_2054223       |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A710     | #2224489        | ARM64_ERRATUM_2224489       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A710     | #3324338        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A710     | #4193788        | ARM64_ERRATUM_4118414       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A715     | #2645198        | ARM64_ERRATUM_2645198       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A715     | #3456084        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A720     | #3456091        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A725     | #3456106        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-X1       | #3324344        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-X1       | #4193791        | ARM64_ERRATUM_4118414       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-X1C      | #3324346        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-X1C      | #4193792        | ARM64_ERRATUM_4118414       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-X2       | #2119858        | ARM64_ERRATUM_2119858       |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-X2       | #2224489        | ARM64_ERRATUM_2224489       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-X2       | #3324338        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-X2       | #4193788        | ARM64_ERRATUM_4118414       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-X3       | #3324335        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-X3       | #4193786        | ARM64_ERRATUM_4118414       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-X4       | #3194386        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-X4       | #4118414        | ARM64_ERRATUM_4118414       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-X925     | #3324334        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-X925     | #4193781        | ARM64_ERRATUM_4118414       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Neoverse-N1     | #1188873,1418040| ARM64_ERRATUM_1418040       |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Neoverse-N1     | #1349291        | N/A                         |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Neoverse-N1     | #1542419        | ARM64_ERRATUM_1542419       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Neoverse-N1     | #3324349        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Neoverse-N1     | #4193800        | ARM64_ERRATUM_4118414       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Neoverse-N2     | #2139208        | ARM64_ERRATUM_2139208       |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Neoverse-N2     | #2067961        | ARM64_ERRATUM_2067961       |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Neoverse-N2     | #2253138        | ARM64_ERRATUM_2253138       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Neoverse-N2     | #3324339        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Neoverse-N2     | #4193789        | ARM64_ERRATUM_4118414       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Neoverse-N3     | #3456111        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Neoverse-V1     | #3324341        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Neoverse-V1     | #4193790        | ARM64_ERRATUM_4118414       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Neoverse-V2     | #3324336        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Neoverse-V2     | #4193787        | ARM64_ERRATUM_4118414       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Neoverse-V3     | #3312417        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Neoverse-V3     | #4193784        | ARM64_ERRATUM_4118414       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Neoverse-V3AE   | #3312417        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Neoverse-V3AE   | #4193784        | ARM64_ERRATUM_4118414       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | C1-Premium      | #4193780        | ARM64_ERRATUM_4118414       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | C1-Pro          | #4193714        | ARM64_ERRATUM_4193714       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | C1-Ultra        | #4193780        | ARM64_ERRATUM_4118414       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | MMU-500         | #841119,826419  | N/A                         |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | MMU-600         | #1076982,1209401| N/A                         |
@@ -184,6 +274,8 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | NVIDIA         | Carmel Core     | N/A             | NVIDIA_CARMEL_CNP_ERRATUM   |
 +----------------+-----------------+-----------------+-----------------------------+
+| NVIDIA         | Olympus core    | T410-OLY-1029   | ARM64_ERRATUM_4118414       |
++----------------+-----------------+-----------------+-----------------------------+
 | NVIDIA         | T241 GICv3/4.x  | T241-FABRIC-4   | N/A                         |
 +----------------+-----------------+-----------------+-----------------------------+
 +----------------+-----------------+-----------------+-----------------------------+
@@ -200,8 +292,9 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | Hisilicon      | Hip08 SMMU PMCG | #162001800      | N/A                         |
 +----------------+-----------------+-----------------+-----------------------------+
-| Hisilicon      | Hip08 SMMU PMCG | #162001900      | N/A                         |
-|                | Hip09 SMMU PMCG |                 |                             |
+| Hisilicon      | Hip{08,09,09A,10| #162001900      | N/A                         |
+|                | ,10C,11}        |                 |                             |
+|                | SMMU PMCG       |                 |                             |
 +----------------+-----------------+-----------------+-----------------------------+
 +----------------+-----------------+-----------------+-----------------------------+
 | Qualcomm Tech. | Kryo/Falkor v1  | E1003           | QCOM_FALKOR_ERRATUM_1003    |
@@ -233,3 +326,14 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | ASR            | ASR8601         | #8601001        | N/A                         |
 +----------------+-----------------+-----------------+-----------------------------+
++----------------+-----------------+-----------------+-----------------------------+
+| Microsoft      | Azure Cobalt 100| #2139208        | ARM64_ERRATUM_2139208       |
++----------------+-----------------+-----------------+-----------------------------+
+| Microsoft      | Azure Cobalt 100| #2067961        | ARM64_ERRATUM_2067961       |
++----------------+-----------------+-----------------+-----------------------------+
+| Microsoft      | Azure Cobalt 100| #2253138        | ARM64_ERRATUM_2253138       |
++----------------+-----------------+-----------------+-----------------------------+
+| Microsoft      | Azure Cobalt 100| #3324339        | ARM64_ERRATUM_3194386       |
++----------------+-----------------+-----------------+-----------------------------+
+| Microsoft      | Azure Cobalt 100| #4193789        | ARM64_ERRATUM_4118414       |
++----------------+-----------------+-----------------+-----------------------------+
diff --git linux-libre-6.6-gnu/Documentation/arch/ia64/features.rst linux-libre-6.6.147-gnu/Documentation/arch/ia64/features.rst
index d7226fdcf5f8c..056838d2ab55c 100644
--- linux-libre-6.6-gnu/Documentation/arch/ia64/features.rst
+++ linux-libre-6.6.147-gnu/Documentation/arch/ia64/features.rst
@@ -1,3 +1,3 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-.. kernel-feat:: $srctree/Documentation/features ia64
+.. kernel-feat:: features ia64
diff --git linux-libre-6.6-gnu/Documentation/arch/loongarch/features.rst linux-libre-6.6.147-gnu/Documentation/arch/loongarch/features.rst
index ebacade3ea454..009f44c7951f8 100644
--- linux-libre-6.6-gnu/Documentation/arch/loongarch/features.rst
+++ linux-libre-6.6.147-gnu/Documentation/arch/loongarch/features.rst
@@ -1,3 +1,3 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-.. kernel-feat:: $srctree/Documentation/features loongarch
+.. kernel-feat:: features loongarch
diff --git linux-libre-6.6-gnu/Documentation/arch/m68k/features.rst linux-libre-6.6.147-gnu/Documentation/arch/m68k/features.rst
index 5107a21194724..de7f0ccf7fc8e 100644
--- linux-libre-6.6-gnu/Documentation/arch/m68k/features.rst
+++ linux-libre-6.6.147-gnu/Documentation/arch/m68k/features.rst
@@ -1,3 +1,3 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-.. kernel-feat:: $srctree/Documentation/features m68k
+.. kernel-feat:: features m68k
diff --git linux-libre-6.6-gnu/Documentation/arch/mips/features.rst linux-libre-6.6.147-gnu/Documentation/arch/mips/features.rst
index 1973d729b29a9..6e0ffe3e73540 100644
--- linux-libre-6.6-gnu/Documentation/arch/mips/features.rst
+++ linux-libre-6.6.147-gnu/Documentation/arch/mips/features.rst
@@ -1,3 +1,3 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-.. kernel-feat:: $srctree/Documentation/features mips
+.. kernel-feat:: features mips
diff --git linux-libre-6.6-gnu/Documentation/arch/nios2/features.rst linux-libre-6.6.147-gnu/Documentation/arch/nios2/features.rst
index 8449e63f69b2b..89913810ccb5a 100644
--- linux-libre-6.6-gnu/Documentation/arch/nios2/features.rst
+++ linux-libre-6.6.147-gnu/Documentation/arch/nios2/features.rst
@@ -1,3 +1,3 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-.. kernel-feat:: $srctree/Documentation/features nios2
+.. kernel-feat:: features nios2
diff --git linux-libre-6.6-gnu/Documentation/arch/openrisc/features.rst linux-libre-6.6.147-gnu/Documentation/arch/openrisc/features.rst
index 3f7c40d219f2c..bae2e25adfd64 100644
--- linux-libre-6.6-gnu/Documentation/arch/openrisc/features.rst
+++ linux-libre-6.6.147-gnu/Documentation/arch/openrisc/features.rst
@@ -1,3 +1,3 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-.. kernel-feat:: $srctree/Documentation/features openrisc
+.. kernel-feat:: features openrisc
diff --git linux-libre-6.6-gnu/Documentation/arch/parisc/features.rst linux-libre-6.6.147-gnu/Documentation/arch/parisc/features.rst
index 501d7c4500379..b3aa4d243b936 100644
--- linux-libre-6.6-gnu/Documentation/arch/parisc/features.rst
+++ linux-libre-6.6.147-gnu/Documentation/arch/parisc/features.rst
@@ -1,3 +1,3 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-.. kernel-feat:: $srctree/Documentation/features parisc
+.. kernel-feat:: features parisc
diff --git linux-libre-6.6-gnu/Documentation/arch/s390/features.rst linux-libre-6.6.147-gnu/Documentation/arch/s390/features.rst
index 57c296a9d8f30..2883dc9506817 100644
--- linux-libre-6.6-gnu/Documentation/arch/s390/features.rst
+++ linux-libre-6.6.147-gnu/Documentation/arch/s390/features.rst
@@ -1,3 +1,3 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-.. kernel-feat:: $srctree/Documentation/features s390
+.. kernel-feat:: features s390
diff --git linux-libre-6.6-gnu/Documentation/arch/sh/features.rst linux-libre-6.6.147-gnu/Documentation/arch/sh/features.rst
index f722af3b6c993..fae48fe81e9bd 100644
--- linux-libre-6.6-gnu/Documentation/arch/sh/features.rst
+++ linux-libre-6.6.147-gnu/Documentation/arch/sh/features.rst
@@ -1,3 +1,3 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-.. kernel-feat:: $srctree/Documentation/features sh
+.. kernel-feat:: features sh
diff --git linux-libre-6.6-gnu/Documentation/arch/sparc/features.rst linux-libre-6.6.147-gnu/Documentation/arch/sparc/features.rst
index c0c92468b0fe9..96835b6d598a1 100644
--- linux-libre-6.6-gnu/Documentation/arch/sparc/features.rst
+++ linux-libre-6.6.147-gnu/Documentation/arch/sparc/features.rst
@@ -1,3 +1,3 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-.. kernel-feat:: $srctree/Documentation/features sparc
+.. kernel-feat:: features sparc
diff --git linux-libre-6.6-gnu/Documentation/arch/x86/amd-memory-encryption.rst linux-libre-6.6.147-gnu/Documentation/arch/x86/amd-memory-encryption.rst
index 934310ce72582..bace87cc9ca2c 100644
--- linux-libre-6.6-gnu/Documentation/arch/x86/amd-memory-encryption.rst
+++ linux-libre-6.6.147-gnu/Documentation/arch/x86/amd-memory-encryption.rst
@@ -87,14 +87,14 @@ The state of SME in the Linux kernel can be documented as follows:
 	  kernel is non-zero).
 
 SME can also be enabled and activated in the BIOS. If SME is enabled and
-activated in the BIOS, then all memory accesses will be encrypted and it will
-not be necessary to activate the Linux memory encryption support.  If the BIOS
-merely enables SME (sets bit 23 of the MSR_AMD64_SYSCFG), then Linux can activate
-memory encryption by default (CONFIG_AMD_MEM_ENCRYPT_ACTIVE_BY_DEFAULT=y) or
-by supplying mem_encrypt=on on the kernel command line.  However, if BIOS does
-not enable SME, then Linux will not be able to activate memory encryption, even
-if configured to do so by default or the mem_encrypt=on command line parameter
-is specified.
+activated in the BIOS, then all memory accesses will be encrypted and it
+will not be necessary to activate the Linux memory encryption support.
+
+If the BIOS merely enables SME (sets bit 23 of the MSR_AMD64_SYSCFG),
+then memory encryption can be enabled by supplying mem_encrypt=on on the
+kernel command line.  However, if BIOS does not enable SME, then Linux
+will not be able to activate memory encryption, even if configured to do
+so by default or the mem_encrypt=on command line parameter is specified.
 
 Secure Nested Paging (SNP)
 ==========================
diff --git linux-libre-6.6-gnu/Documentation/arch/x86/features.rst linux-libre-6.6.147-gnu/Documentation/arch/x86/features.rst
index b663f15053ce8..a33616346a388 100644
--- linux-libre-6.6-gnu/Documentation/arch/x86/features.rst
+++ linux-libre-6.6.147-gnu/Documentation/arch/x86/features.rst
@@ -1,3 +1,3 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-.. kernel-feat:: $srctree/Documentation/features x86
+.. kernel-feat:: features x86
diff --git linux-libre-6.6-gnu/Documentation/arch/x86/mds.rst linux-libre-6.6.147-gnu/Documentation/arch/x86/mds.rst
index e73fdff62c0aa..43106f349cc35 100644
--- linux-libre-6.6-gnu/Documentation/arch/x86/mds.rst
+++ linux-libre-6.6.147-gnu/Documentation/arch/x86/mds.rst
@@ -93,7 +93,10 @@ enters a C-state.
 
 The kernel provides a function to invoke the buffer clearing:
 
-    mds_clear_cpu_buffers()
+    x86_clear_cpu_buffers()
+
+Also macro CLEAR_CPU_BUFFERS can be used in ASM late in exit-to-user path.
+Other than CFLAGS.ZF, this macro doesn't clobber any registers.
 
 The mitigation is invoked on kernel/userspace, hypervisor/guest and C-state
 (idle) transitions.
@@ -138,17 +141,30 @@ Mitigation points
 
    When transitioning from kernel to user space the CPU buffers are flushed
    on affected CPUs when the mitigation is not disabled on the kernel
-   command line. The migitation is enabled through the static key
-   mds_user_clear.
-
-   The mitigation is invoked in prepare_exit_to_usermode() which covers
-   all but one of the kernel to user space transitions.  The exception
-   is when we return from a Non Maskable Interrupt (NMI), which is
-   handled directly in do_nmi().
-
-   (The reason that NMI is special is that prepare_exit_to_usermode() can
-    enable IRQs.  In NMI context, NMIs are blocked, and we don't want to
-    enable IRQs with NMIs blocked.)
+   command line. The mitigation is enabled through the feature flag
+   X86_FEATURE_CLEAR_CPU_BUF.
+
+   The mitigation is invoked just before transitioning to userspace after
+   user registers are restored. This is done to minimize the window in
+   which kernel data could be accessed after VERW e.g. via an NMI after
+   VERW.
+
+   **Corner case not handled**
+   Interrupts returning to kernel don't clear CPUs buffers since the
+   exit-to-user path is expected to do that anyways. But, there could be
+   a case when an NMI is generated in kernel after the exit-to-user path
+   has cleared the buffers. This case is not handled and NMI returning to
+   kernel don't clear CPU buffers because:
+
+   1. It is rare to get an NMI after VERW, but before returning to userspace.
+   2. For an unprivileged user, there is no known way to make that NMI
+      less rare or target it.
+   3. It would take a large number of these precisely-timed NMIs to mount
+      an actual attack.  There's presumably not enough bandwidth.
+   4. The NMI in question occurs after a VERW, i.e. when user state is
+      restored and most interesting data is already scrubbed. Whats left
+      is only the data that NMI touches, and that may or may not be of
+      any interest.
 
 
 2. C-State transition
@@ -169,9 +185,9 @@ Mitigation points
    idle clearing would be a window dressing exercise and is therefore not
    activated.
 
-   The invocation is controlled by the static key mds_idle_clear which is
-   switched depending on the chosen mitigation mode and the SMT state of
-   the system.
+   The invocation is controlled by the static key cpu_buf_idle_clear which is
+   switched depending on the chosen mitigation mode and the SMT state of the
+   system.
 
    The buffer clear is only invoked before entering the C-State to prevent
    that stale data from the idling CPU from spilling to the Hyper-Thread
diff --git linux-libre-6.6-gnu/Documentation/arch/xtensa/features.rst linux-libre-6.6.147-gnu/Documentation/arch/xtensa/features.rst
index 6b92c7bfa19da..28dcce1759be4 100644
--- linux-libre-6.6-gnu/Documentation/arch/xtensa/features.rst
+++ linux-libre-6.6.147-gnu/Documentation/arch/xtensa/features.rst
@@ -1,3 +1,3 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-.. kernel-feat:: $srctree/Documentation/features xtensa
+.. kernel-feat:: features xtensa
diff --git linux-libre-6.6-gnu/Documentation/bpf/map_hash.rst linux-libre-6.6.147-gnu/Documentation/bpf/map_hash.rst
index d2343952f2cbd..8606bf958a8cf 100644
--- linux-libre-6.6-gnu/Documentation/bpf/map_hash.rst
+++ linux-libre-6.6.147-gnu/Documentation/bpf/map_hash.rst
@@ -233,10 +233,16 @@ attempts in order to enforce the LRU property which have increasing impacts on
 other CPUs involved in the following operation attempts:
 
 - Attempt to use CPU-local state to batch operations
-- Attempt to fetch free nodes from global lists
+- Attempt to fetch ``target_free`` free nodes from global lists
 - Attempt to pull any node from a global list and remove it from the hashmap
 - Attempt to pull any node from any CPU's list and remove it from the hashmap
 
+The number of nodes to borrow from the global list in a batch, ``target_free``,
+depends on the size of the map. Larger batch size reduces lock contention, but
+may also exhaust the global structure. The value is computed at map init to
+avoid exhaustion, by limiting aggregate reservation by all CPUs to half the map
+size. With a minimum of a single element and maximum budget of 128 at a time.
+
 This algorithm is described visually in the following diagram. See the
 description in commit 3a08c2fd7634 ("bpf: LRU List") for a full explanation of
 the corresponding operations:
diff --git linux-libre-6.6-gnu/Documentation/bpf/map_lpm_trie.rst linux-libre-6.6.147-gnu/Documentation/bpf/map_lpm_trie.rst
index 74d64a30f5007..f9cd579496c9c 100644
--- linux-libre-6.6-gnu/Documentation/bpf/map_lpm_trie.rst
+++ linux-libre-6.6.147-gnu/Documentation/bpf/map_lpm_trie.rst
@@ -17,7 +17,7 @@ significant byte.
 
 LPM tries may be created with a maximum prefix length that is a multiple
 of 8, in the range from 8 to 2048. The key used for lookup and update
-operations is a ``struct bpf_lpm_trie_key``, extended by
+operations is a ``struct bpf_lpm_trie_key_u8``, extended by
 ``max_prefixlen/8`` bytes.
 
 - For IPv4 addresses the data length is 4 bytes
diff --git linux-libre-6.6-gnu/Documentation/bpf/map_lru_hash_update.dot linux-libre-6.6.147-gnu/Documentation/bpf/map_lru_hash_update.dot
index a0fee349d29c2..ab10058f5b79f 100644
--- linux-libre-6.6-gnu/Documentation/bpf/map_lru_hash_update.dot
+++ linux-libre-6.6.147-gnu/Documentation/bpf/map_lru_hash_update.dot
@@ -35,18 +35,18 @@ digraph {
   fn_bpf_lru_list_pop_free_to_local [shape=rectangle,fillcolor=2,
     label="Flush local pending,
     Rotate Global list, move
-    LOCAL_FREE_TARGET
+    target_free
     from global -> local"]
   // Also corresponds to:
   // fn__local_list_flush()
   // fn_bpf_lru_list_rotate()
   fn___bpf_lru_node_move_to_free[shape=diamond,fillcolor=2,
-    label="Able to free\nLOCAL_FREE_TARGET\nnodes?"]
+    label="Able to free\ntarget_free\nnodes?"]
 
   fn___bpf_lru_list_shrink_inactive [shape=rectangle,fillcolor=3,
     label="Shrink inactive list
       up to remaining
-      LOCAL_FREE_TARGET
+      target_free
       (global LRU -> local)"]
   fn___bpf_lru_list_shrink [shape=diamond,fillcolor=2,
     label="> 0 entries in\nlocal free list?"]
diff --git linux-libre-6.6-gnu/Documentation/cdrom/cdrom-standard.rst linux-libre-6.6.147-gnu/Documentation/cdrom/cdrom-standard.rst
index 7964fe134277b..6c1303cff159e 100644
--- linux-libre-6.6-gnu/Documentation/cdrom/cdrom-standard.rst
+++ linux-libre-6.6.147-gnu/Documentation/cdrom/cdrom-standard.rst
@@ -217,7 +217,7 @@ current *struct* is::
 		int (*media_changed)(struct cdrom_device_info *, int);
 		int (*tray_move)(struct cdrom_device_info *, int);
 		int (*lock_door)(struct cdrom_device_info *, int);
-		int (*select_speed)(struct cdrom_device_info *, int);
+		int (*select_speed)(struct cdrom_device_info *, unsigned long);
 		int (*get_last_session) (struct cdrom_device_info *,
 					 struct cdrom_multisession *);
 		int (*get_mcn)(struct cdrom_device_info *, struct cdrom_mcn *);
@@ -396,7 +396,7 @@ action need be taken, and the return value should be 0.
 
 ::
 
-	int select_speed(struct cdrom_device_info *cdi, int speed)
+	int select_speed(struct cdrom_device_info *cdi, unsigned long speed)
 
 Some CD-ROM drives are capable of changing their head-speed. There
 are several reasons for changing the speed of a CD-ROM drive. Badly
diff --git linux-libre-6.6-gnu/Documentation/conf.py linux-libre-6.6.147-gnu/Documentation/conf.py
index d4fdf6a3875a8..e385e24fe9e72 100644
--- linux-libre-6.6-gnu/Documentation/conf.py
+++ linux-libre-6.6.147-gnu/Documentation/conf.py
@@ -345,9 +345,9 @@ sys.stderr.write("Using %s theme\n" % html_theme)
 html_static_path = ['sphinx-static']
 
 # If true, Docutils "smart quotes" will be used to convert quotes and dashes
-# to typographically correct entities.  This will convert "--" to "—",
-# which is not always what we want, so disable it.
-smartquotes = False
+# to typographically correct entities.  However, conversion of "--" to "—"
+# is not always what we want, so enable only quotes.
+smartquotes_action = 'q'
 
 # Custom sidebar templates, maps document names to template names.
 # Note that the RTD theme ignores this
@@ -383,6 +383,12 @@ latex_elements = {
         verbatimhintsturnover=false,
     ''',
 
+    #
+    # Some of our authors are fond of deep nesting; tell latex to
+    # cope.
+    #
+    'maxlistdepth': '10',
+
     # For CJK One-half spacing, need to be in front of hyperref
     'extrapackages': r'\usepackage{setspace}',
 
diff --git linux-libre-6.6-gnu/Documentation/core-api/symbol-namespaces.rst linux-libre-6.6.147-gnu/Documentation/core-api/symbol-namespaces.rst
index 12e4aecdae945..29875e25e376f 100644
--- linux-libre-6.6-gnu/Documentation/core-api/symbol-namespaces.rst
+++ linux-libre-6.6.147-gnu/Documentation/core-api/symbol-namespaces.rst
@@ -28,6 +28,9 @@ kernel. As of today, modules that make use of symbols exported into namespaces,
 are required to import the namespace. Otherwise the kernel will, depending on
 its configuration, reject loading the module or warn about a missing import.
 
+Additionally, it is possible to put symbols into a module namespace, strictly
+limiting which modules are allowed to use these symbols.
+
 2. How to define Symbol Namespaces
 ==================================
 
@@ -84,6 +87,22 @@ unit as preprocessor statement. The above example would then read::
 within the corresponding compilation unit before any EXPORT_SYMBOL macro is
 used.
 
+2.3 Using the EXPORT_SYMBOL_GPL_FOR_MODULES() macro
+===================================================
+
+Symbols exported using this macro are put into a module namespace. This
+namespace cannot be imported.
+
+The macro takes a comma separated list of module names, allowing only those
+modules to access this symbol. Simple tail-globs are supported.
+
+For example:
+
+  EXPORT_SYMBOL_GPL_FOR_MODULES(preempt_notifier_inc, "kvm,kvm-*")
+
+will limit usage of this symbol to modules whoes name matches the given
+patterns.
+
 3. How to use Symbols exported in Namespaces
 ============================================
 
@@ -155,3 +174,6 @@ in-tree modules::
 You can also run nsdeps for external module builds. A typical usage is::
 
 	$ make -C <path_to_kernel_src> M=$PWD nsdeps
+
+Note: it will happily generate an import statement for the module namespace;
+which will not work and generates build and runtime failures.
diff --git linux-libre-6.6-gnu/Documentation/crypto/userspace-if.rst linux-libre-6.6.147-gnu/Documentation/crypto/userspace-if.rst
index f80f243e227e6..4630d3d74913b 100644
--- linux-libre-6.6-gnu/Documentation/crypto/userspace-if.rst
+++ linux-libre-6.6.147-gnu/Documentation/crypto/userspace-if.rst
@@ -328,33 +328,10 @@ CRYPTO_USER_API_RNG_CAVP option:
 Zero-Copy Interface
 -------------------
 
-In addition to the send/write/read/recv system call family, the AF_ALG
-interface can be accessed with the zero-copy interface of
-splice/vmsplice. As the name indicates, the kernel tries to avoid a copy
-operation into kernel space.
-
-The zero-copy operation requires data to be aligned at the page
-boundary. Non-aligned data can be used as well, but may require more
-operations of the kernel which would defeat the speed gains obtained
-from the zero-copy interface.
-
-The system-inherent limit for the size of one zero-copy operation is 16
-pages. If more data is to be sent to AF_ALG, user space must slice the
-input into segments with a maximum size of 16 pages.
-
-Zero-copy can be used with the following code example (a complete
-working example is provided with libkcapi):
-
-::
-
-    int pipes[2];
-
-    pipe(pipes);
-    /* input data in iov */
-    vmsplice(pipes[1], iov, iovlen, SPLICE_F_GIFT);
-    /* opfd is the file descriptor returned from accept() system call */
-    splice(pipes[0], NULL, opfd, NULL, ret, 0);
-    read(opfd, out, outlen);
+AF_ALG used to have zero-copy support, but it was removed due to it being a
+frequent source of vulnerabilities.  For backwards compatibility the splice()
+and sendfile() system calls are still supported, but the kernel will make an
+internal copy of the data before passing it to the crypto code.
 
 
 Setsockopt Interface
diff --git linux-libre-6.6-gnu/Documentation/dev-tools/kselftest.rst linux-libre-6.6.147-gnu/Documentation/dev-tools/kselftest.rst
index deede972f2547..3ae1b3677d7f3 100644
--- linux-libre-6.6-gnu/Documentation/dev-tools/kselftest.rst
+++ linux-libre-6.6.147-gnu/Documentation/dev-tools/kselftest.rst
@@ -255,9 +255,21 @@ Contributing new tests (details)
 
    TEST_PROGS_EXTENDED, TEST_GEN_PROGS_EXTENDED mean it is the
    executable which is not tested by default.
+
    TEST_FILES, TEST_GEN_FILES mean it is the file which is used by
    test.
 
+   TEST_INCLUDES is similar to TEST_FILES, it lists files which should be
+   included when exporting or installing the tests, with the following
+   differences:
+
+    * symlinks to files in other directories are preserved
+    * the part of paths below tools/testing/selftests/ is preserved when
+      copying the files to the output directory
+
+   TEST_INCLUDES is meant to list dependencies located in other directories of
+   the selftests hierarchy.
+
  * First use the headers inside the kernel source and/or git repo, and then the
    system headers.  Headers for the kernel release as opposed to headers
    installed by the distro on the system should be the primary focus to be able
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml
index ea3c5db6b52d2..0f7e1b6ea81e9 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml
+++ linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml
@@ -55,8 +55,7 @@ properties:
       - const: arm,primecell
 
   reg:
-    minItems: 1
-    maxItems: 2
+    maxItems: 1
 
   clocks:
     maxItems: 1
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml
index 3bad47b7b02bb..0b4afb4078ef8 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml
+++ linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml
@@ -41,8 +41,7 @@ properties:
       - const: arm,primecell
 
   reg:
-    minItems: 1
-    maxItems: 2
+    maxItems: 1
 
   clocks:
     maxItems: 1
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/arm/qcom.yaml linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/arm/qcom.yaml
index adbfaea323435..90f31beb80c22 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/arm/qcom.yaml
+++ linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -136,7 +136,7 @@ description: |
   There are many devices in the list below that run the standard ChromeOS
   bootloader setup and use the open source depthcharge bootloader to boot the
   OS. These devices do not use the scheme described above. For details, see:
-  https://docs.kernel.org/arm/google/chromebook-boot-flow.html
+  https://docs.kernel.org/arch/arm/google/chromebook-boot-flow.html
 
 properties:
   $nodename:
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml
index be95f6b97b41a..0c28292a5bb46 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml
+++ linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml
@@ -66,7 +66,7 @@ then:
   required:
     - refresh-rate-hz
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/clock/adi,axi-clkgen.yaml linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/clock/adi,axi-clkgen.yaml
index 5e942bccf2778..2b2041818a0a4 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/clock/adi,axi-clkgen.yaml
+++ linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/clock/adi,axi-clkgen.yaml
@@ -26,9 +26,21 @@ properties:
     description:
       Specifies the reference clock(s) from which the output frequency is
       derived. This must either reference one clock if only the first clock
-      input is connected or two if both clock inputs are connected.
-    minItems: 1
-    maxItems: 2
+      input is connected or two if both clock inputs are connected. The last
+      clock is the AXI bus clock that needs to be enabled so we can access the
+      core registers.
+    minItems: 2
+    maxItems: 3
+
+  clock-names:
+    oneOf:
+      - items:
+          - const: clkin1
+          - const: s_axi_aclk
+      - items:
+          - const: clkin1
+          - const: clkin2
+          - const: s_axi_aclk
 
   '#clock-cells':
     const: 0
@@ -40,6 +52,7 @@ required:
   - compatible
   - reg
   - clocks
+  - clock-names
   - '#clock-cells'
 
 additionalProperties: false
@@ -50,5 +63,6 @@ examples:
       compatible = "adi,axi-clkgen-2.00.a";
       #clock-cells = <0>;
       reg = <0xff000000 0x1000>;
-      clocks = <&osc 1>;
+      clocks = <&osc 1>, <&clkc 15>;
+      clock-names = "clkin1", "s_axi_aclk";
     };
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/connector/usb-connector.yaml linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/connector/usb-connector.yaml
index 7c8a3e8430d30..48a93690bb439 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/connector/usb-connector.yaml
+++ linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/connector/usb-connector.yaml
@@ -232,6 +232,7 @@ properties:
     type: boolean
 
 dependencies:
+  pd-disable: [typec-power-opmode]
   sink-vdos-v1: [ sink-vdos ]
   sink-vdos: [ sink-vdos-v1 ]
 
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/display/bridge/adi,adv7533.yaml linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/display/bridge/adi,adv7533.yaml
index 987aa83c26494..e956f524e379d 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/display/bridge/adi,adv7533.yaml
+++ linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/display/bridge/adi,adv7533.yaml
@@ -87,7 +87,7 @@ properties:
   adi,dsi-lanes:
     description: Number of DSI data lanes connected to the DSI host.
     $ref: /schemas/types.yaml#/definitions/uint32
-    enum: [ 1, 2, 3, 4 ]
+    enum: [ 2, 3, 4 ]
 
   ports:
     description:
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/display/msm/qcom,mdp5.yaml linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/display/msm/qcom,mdp5.yaml
index 91c774f106ceb..ab1196d1ec2dd 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/display/msm/qcom,mdp5.yaml
+++ linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/display/msm/qcom,mdp5.yaml
@@ -59,7 +59,6 @@ properties:
           - const: bus
           - const: core
           - const: vsync
-          - const: lut
           - const: tbu
           - const: tbu_rt
         # MSM8996 has additional iommu clock
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml
index 0999ea07f47bb..e4576546bf0db 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml
+++ linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml
@@ -127,6 +127,7 @@ patternProperties:
           - qcom,dsi-phy-20nm
           - qcom,dsi-phy-28nm-8226
           - qcom,dsi-phy-28nm-hpm
+          - qcom,dsi-phy-28nm-hpm-fam-b
           - qcom,dsi-phy-28nm-lp
           - qcom,hdmi-phy-8084
           - qcom,hdmi-phy-8660
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dpu.yaml linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dpu.yaml
index 4ebea60b8c5ba..8c52fa0ea5f8e 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dpu.yaml
+++ linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dpu.yaml
@@ -25,7 +25,7 @@ properties:
     maxItems: 1
 
   clocks:
-    minItems: 2
+    maxItems: 2
 
   clock-names:
     items:
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dsi-host.yaml linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dsi-host.yaml
index bc5594d186430..300bf2252c3e8 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dsi-host.yaml
+++ linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dsi-host.yaml
@@ -20,7 +20,7 @@ properties:
     maxItems: 2
 
   clocks:
-    minItems: 1
+    maxItems: 1
 
   clock-names:
     items:
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/dma/fsl,edma.yaml linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/dma/fsl,edma.yaml
index 437db0c62339f..e1b4b910044b0 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/dma/fsl,edma.yaml
+++ linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/dma/fsl,edma.yaml
@@ -47,8 +47,8 @@ properties:
       - 3
 
   dma-channels:
-    minItems: 1
-    maxItems: 64
+    minimum: 1
+    maximum: 64
 
   clocks:
     minItems: 1
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/gpio/microchip,mpfs-gpio.yaml linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/gpio/microchip,mpfs-gpio.yaml
index d481e78958a74..2c7355e9547a1 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/gpio/microchip,mpfs-gpio.yaml
+++ linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/gpio/microchip,mpfs-gpio.yaml
@@ -33,7 +33,7 @@ properties:
     const: 2
 
   "#interrupt-cells":
-    const: 1
+    const: 2
 
   ngpios:
     description:
@@ -84,7 +84,7 @@ examples:
         gpio-controller;
         #gpio-cells = <2>;
         interrupt-controller;
-        #interrupt-cells = <1>;
+        #interrupt-cells = <2>;
         interrupts = <53>, <53>, <53>, <53>,
                      <53>, <53>, <53>, <53>,
                      <53>, <53>, <53>, <53>,
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/gpio/xlnx,gpio-xilinx.yaml linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/gpio/xlnx,gpio-xilinx.yaml
index c1060e5fcef3a..d3d8a2e143ed2 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/gpio/xlnx,gpio-xilinx.yaml
+++ linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/gpio/xlnx,gpio-xilinx.yaml
@@ -126,7 +126,7 @@ examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
 
-        gpio@e000a000 {
+        gpio@a0020000 {
             compatible = "xlnx,xps-gpio-1.00.a";
             reg = <0xa0020000 0x10000>;
             #gpio-cells = <2>;
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml
index 6adedd3ec399b..c22e459c175ab 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml
+++ linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml
@@ -75,7 +75,7 @@ required:
   - clocks
 
 allOf:
-  - $ref: i2c-controller.yaml
+  - $ref: /schemas/i2c/i2c-controller.yaml#
   - if:
       properties:
         compatible:
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/i2c/google,cros-ec-i2c-tunnel.yaml linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/i2c/google,cros-ec-i2c-tunnel.yaml
index ab151c9db2191..580003cdfff59 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/i2c/google,cros-ec-i2c-tunnel.yaml
+++ linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/i2c/google,cros-ec-i2c-tunnel.yaml
@@ -21,7 +21,7 @@ description: |
   google,cros-ec-spi or google,cros-ec-i2c.
 
 allOf:
-  - $ref: i2c-controller.yaml#
+  - $ref: /schemas/i2c/i2c-controller.yaml#
 
 properties:
   compatible:
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.yaml linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.yaml
index 424a4fc218b66..2cb311ddd912a 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.yaml
+++ linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.yaml
@@ -103,7 +103,10 @@ properties:
 
   resets:
     items:
-      - description: module reset
+      - description:
+          Module reset. This property is optional for controllers in Tegra194,
+          Tegra234 etc where an internal software reset is available as an
+          alternative.
 
   reset-names:
     items:
@@ -119,6 +122,13 @@ properties:
       - const: rx
       - const: tx
 
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
 allOf:
   - $ref: /schemas/i2c/i2c-controller.yaml
   - if:
@@ -172,6 +182,18 @@ allOf:
           items:
             - description: phandle to the VENC power domain
 
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - nvidia,tegra194-i2c
+    then:
+      required:
+        - resets
+        - reset-names
+
 unevaluatedProperties: false
 
 examples:
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml
index 9996dd93f84b2..e1f450b80db27 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml
+++ linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml
@@ -28,6 +28,9 @@ properties:
   reg:
     maxItems: 1
 
+  clocks:
+    maxItems: 1
+
   dmas:
     maxItems: 1
 
@@ -39,12 +42,16 @@ properties:
     $ref: /schemas/types.yaml#/definitions/phandle
     description:
       A reference to a the actual ADC to which this FPGA ADC interfaces to.
+    deprecated: true
+
+  '#io-backend-cells':
+    const: 0
 
 required:
   - compatible
   - dmas
   - reg
-  - adi,adc-dev
+  - clocks
 
 additionalProperties: false
 
@@ -55,7 +62,7 @@ examples:
         reg = <0x44a00000 0x10000>;
         dmas = <&rx_dma 0>;
         dma-names = "rx";
-
-        adi,adc-dev = <&spi_adc>;
+        clocks = <&axi_clk>;
+        #io-backend-cells = <0>;
     };
 ...
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml
index 96340a05754ce..2beed2e2406c4 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml
+++ linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml
@@ -26,7 +26,7 @@ properties:
     maxItems: 1
 
   spi-max-frequency:
-    maximum: 30000000
+    maximum: 66000000
 
   reset-gpios:
     maxItems: 1
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/iio/health/maxim,max30102.yaml linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/iio/health/maxim,max30102.yaml
index c13c10c8d65da..eed0df9d3a232 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/iio/health/maxim,max30102.yaml
+++ linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/iio/health/maxim,max30102.yaml
@@ -42,7 +42,7 @@ allOf:
       properties:
         compatible:
           contains:
-            const: maxim,max30100
+            const: maxim,max30102
     then:
       properties:
         maxim,green-led-current-microamp: false
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml
index 9790f75fc669e..fe5145d3b73cf 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml
+++ linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml
@@ -23,7 +23,6 @@ properties:
           - ak8963
           - ak09911
           - ak09912
-          - ak09916
         deprecated: true
 
   reg:
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml
index 0f4a062c9d6fe..72e70f9d4b4a2 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml
+++ linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml
@@ -50,7 +50,7 @@ properties:
       The 2nd cell contains the interrupt number for the interrupt type.
       SPI interrupts are in the range [0-987]. PPI interrupts are in the
       range [0-15]. Extended SPI interrupts are in the range [0-1023].
-      Extended PPI interrupts are in the range [0-127].
+      Extended PPI interrupts are in the range [0-63].
 
       The 3rd cell is the flags, encoded as follows:
       bits[3:0] trigger type and level flags.
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/interrupt-controller/qcom,mpm.yaml linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/interrupt-controller/qcom,mpm.yaml
index 509d20c091af8..6a206111d4e0f 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/interrupt-controller/qcom,mpm.yaml
+++ linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/interrupt-controller/qcom,mpm.yaml
@@ -62,6 +62,9 @@ properties:
         - description: MPM pin number
         - description: GIC SPI number for the MPM pin
 
+  '#power-domain-cells':
+    const: 0
+
 required:
   - compatible
   - reg
@@ -93,4 +96,5 @@ examples:
                            <86 183>,
                            <90 260>,
                            <91 260>;
+        #power-domain-cells = <0>;
     };
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml
index e850a8894758d..bb40bb9e036ee 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml
+++ linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml
@@ -27,7 +27,7 @@ properties:
     description: |
       For multicolor LED support this property should be defined as either
       LED_COLOR_ID_RGB or LED_COLOR_ID_MULTI which can be found in
-      include/linux/leds/common.h.
+      include/dt-bindings/leds/common.h.
     enum: [ 8, 9 ]
 
 required:
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-video-engine.yaml linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-video-engine.yaml
index 541325f900a1d..01f2afa023f04 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-video-engine.yaml
+++ linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-video-engine.yaml
@@ -63,6 +63,16 @@ properties:
       CMA pool to use for buffers allocation instead of the default
       CMA pool.
 
+  # FIXME: This should be made required eventually once every SoC will
+  # have the MBUS declared.
+  interconnects:
+    maxItems: 1
+
+  # FIXME: This should be made required eventually once every SoC will
+  # have the MBUS declared.
+  interconnect-names:
+    const: dma-mem
+
 required:
   - compatible
   - reg
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/media/i2c/ovti,ov2680.yaml linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/media/i2c/ovti,ov2680.yaml
index cf456f8d9ddcb..c87677f5e2a25 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/media/i2c/ovti,ov2680.yaml
+++ linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/media/i2c/ovti,ov2680.yaml
@@ -37,15 +37,15 @@ properties:
       active low.
     maxItems: 1
 
-  dovdd-supply:
+  DOVDD-supply:
     description:
       Definition of the regulator used as interface power supply.
 
-  avdd-supply:
+  AVDD-supply:
     description:
       Definition of the regulator used as analog power supply.
 
-  dvdd-supply:
+  DVDD-supply:
     description:
       Definition of the regulator used as digital power supply.
 
@@ -59,9 +59,9 @@ required:
   - reg
   - clocks
   - clock-names
-  - dovdd-supply
-  - avdd-supply
-  - dvdd-supply
+  - DOVDD-supply
+  - AVDD-supply
+  - DVDD-supply
   - reset-gpios
   - port
 
@@ -82,9 +82,9 @@ examples:
                 clock-names = "xvclk";
                 reset-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
 
-                dovdd-supply = <&sw2_reg>;
-                dvdd-supply = <&sw2_reg>;
-                avdd-supply = <&reg_peri_3p15v>;
+                DOVDD-supply = <&sw2_reg>;
+                DVDD-supply = <&sw2_reg>;
+                AVDD-supply = <&reg_peri_3p15v>;
 
                 port {
                         ov2680_to_mipi: endpoint {
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/media/i2c/st,st-mipid02.yaml linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/media/i2c/st,st-mipid02.yaml
index b68141264c0e9..4d40e75b4e1ef 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/media/i2c/st,st-mipid02.yaml
+++ linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/media/i2c/st,st-mipid02.yaml
@@ -71,7 +71,7 @@ properties:
                 description:
                   Any lane can be inverted or not.
                 minItems: 1
-                maxItems: 2
+                maxItems: 3
 
             required:
               - data-lanes
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/media/mediatek,mdp3-rdma.yaml linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/media/mediatek,mdp3-rdma.yaml
index 7032c7e150390..3e128733ef535 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/media/mediatek,mdp3-rdma.yaml
+++ linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/media/mediatek,mdp3-rdma.yaml
@@ -61,6 +61,9 @@ properties:
       - description: used for 1st data pipe from RDMA
       - description: used for 2nd data pipe from RDMA
 
+  '#dma-cells':
+    const: 1
+
 required:
   - compatible
   - reg
@@ -70,6 +73,7 @@ required:
   - clocks
   - iommus
   - mboxes
+  - '#dma-cells'
 
 additionalProperties: false
 
@@ -80,16 +84,17 @@ examples:
     #include <dt-bindings/power/mt8183-power.h>
     #include <dt-bindings/memory/mt8183-larb-port.h>
 
-    mdp3_rdma0: mdp3-rdma0@14001000 {
-      compatible = "mediatek,mt8183-mdp3-rdma";
-      reg = <0x14001000 0x1000>;
-      mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x1000 0x1000>;
-      mediatek,gce-events = <CMDQ_EVENT_MDP_RDMA0_SOF>,
-                            <CMDQ_EVENT_MDP_RDMA0_EOF>;
-      power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
-      clocks = <&mmsys CLK_MM_MDP_RDMA0>,
-               <&mmsys CLK_MM_MDP_RSZ1>;
-      iommus = <&iommu>;
-      mboxes = <&gce 20 CMDQ_THR_PRIO_LOWEST>,
-               <&gce 21 CMDQ_THR_PRIO_LOWEST>;
+    dma-controller@14001000 {
+        compatible = "mediatek,mt8183-mdp3-rdma";
+        reg = <0x14001000 0x1000>;
+        mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x1000 0x1000>;
+        mediatek,gce-events = <CMDQ_EVENT_MDP_RDMA0_SOF>,
+                              <CMDQ_EVENT_MDP_RDMA0_EOF>;
+        power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+        clocks = <&mmsys CLK_MM_MDP_RDMA0>,
+                 <&mmsys CLK_MM_MDP_RSZ1>;
+        iommus = <&iommu>;
+        mboxes = <&gce 20 CMDQ_THR_PRIO_LOWEST>,
+                 <&gce 21 CMDQ_THR_PRIO_LOWEST>;
+        #dma-cells = <1>;
     };
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/media/mediatek,mdp3-wrot.yaml linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/media/mediatek,mdp3-wrot.yaml
index 0baa77198fa21..64ea98aa05928 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/media/mediatek,mdp3-wrot.yaml
+++ linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/media/mediatek,mdp3-wrot.yaml
@@ -50,6 +50,9 @@ properties:
   iommus:
     maxItems: 1
 
+  '#dma-cells':
+    const: 1
+
 required:
   - compatible
   - reg
@@ -58,6 +61,7 @@ required:
   - power-domains
   - clocks
   - iommus
+  - '#dma-cells'
 
 additionalProperties: false
 
@@ -68,13 +72,14 @@ examples:
     #include <dt-bindings/power/mt8183-power.h>
     #include <dt-bindings/memory/mt8183-larb-port.h>
 
-    mdp3_wrot0: mdp3-wrot0@14005000 {
-      compatible = "mediatek,mt8183-mdp3-wrot";
-      reg = <0x14005000 0x1000>;
-      mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x5000 0x1000>;
-      mediatek,gce-events = <CMDQ_EVENT_MDP_WROT0_SOF>,
-                            <CMDQ_EVENT_MDP_WROT0_EOF>;
-      power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
-      clocks = <&mmsys CLK_MM_MDP_WROT0>;
-      iommus = <&iommu>;
+    dma-controller@14005000 {
+        compatible = "mediatek,mt8183-mdp3-wrot";
+        reg = <0x14005000 0x1000>;
+        mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x5000 0x1000>;
+        mediatek,gce-events = <CMDQ_EVENT_MDP_WROT0_SOF>,
+                              <CMDQ_EVENT_MDP_WROT0_EOF>;
+        power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+        clocks = <&mmsys CLK_MM_MDP_WROT0>;
+        iommus = <&iommu>;
+        #dma-cells = <1>;
     };
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/media/rockchip-isp1.yaml linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/media/rockchip-isp1.yaml
index e466dff8286d2..afcaa427d48b0 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/media/rockchip-isp1.yaml
+++ linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/media/rockchip-isp1.yaml
@@ -90,15 +90,16 @@ properties:
         description: connection point for input on the parallel interface
 
         properties:
-          bus-type:
-            enum: [5, 6]
-
           endpoint:
             $ref: video-interfaces.yaml#
             unevaluatedProperties: false
 
-        required:
-          - bus-type
+            properties:
+              bus-type:
+                enum: [5, 6]
+
+            required:
+              - bus-type
 
     anyOf:
       - required:
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/mfd/mt6397.txt linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/mfd/mt6397.txt
index 294693a8906cf..10540aa7afa1a 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/mfd/mt6397.txt
+++ linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/mfd/mt6397.txt
@@ -22,8 +22,9 @@ compatible:
 	"mediatek,mt6323" for PMIC MT6323
 	"mediatek,mt6331" for PMIC MT6331 and MT6332
 	"mediatek,mt6357" for PMIC MT6357
-	"mediatek,mt6358" for PMIC MT6358 and MT6366
+	"mediatek,mt6358" for PMIC MT6358
 	"mediatek,mt6359" for PMIC MT6359
+	"mediatek,mt6366", "mediatek,mt6358" for PMIC MT6366
 	"mediatek,mt6397" for PMIC MT6397
 
 Optional subnodes:
@@ -40,6 +41,7 @@ Optional subnodes:
 		- compatible: "mediatek,mt6323-regulator"
 	see ../regulator/mt6323-regulator.txt
 		- compatible: "mediatek,mt6358-regulator"
+		- compatible: "mediatek,mt6366-regulator", "mediatek-mt6358-regulator"
 	see ../regulator/mt6358-regulator.txt
 		- compatible: "mediatek,mt6397-regulator"
 	see ../regulator/mt6397-regulator.txt
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml
index 05747e012516e..ab26b1bd567fd 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml
+++ linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml
@@ -50,15 +50,15 @@ properties:
     minimum: 0
     maximum: 1
 
-  rohm,charger-sense-resistor-ohms:
-    minimum: 10000000
-    maximum: 50000000
+  rohm,charger-sense-resistor-micro-ohms:
+    minimum: 10000
+    maximum: 50000
     description: |
-      BD71827 and BD71828 have SAR ADC for measuring charging currents.
-      External sense resistor (RSENSE in data sheet) should be used. If
-      something other but 30MOhm resistor is used the resistance value
-      should be given here in Ohms.
-    default: 30000000
+      BD71815 has SAR ADC for measuring charging currents. External sense
+      resistor (RSENSE in data sheet) should be used. If something other
+      but a 30 mOhm resistor is used the resistance value should be given
+      here in micro Ohms.
+    default: 30000
 
   regulators:
     $ref: ../regulator/rohm,bd71815-regulator.yaml
@@ -67,7 +67,7 @@ properties:
 
   gpio-reserved-ranges:
     description: |
-      Usage of BD71828 GPIO pins can be changed via OTP. This property can be
+      Usage of BD71815 GPIO pins can be changed via OTP. This property can be
       used to mark the pins which should not be configured for GPIO. Please see
       the ../gpio/gpio.txt for more information.
 
@@ -113,7 +113,7 @@ examples:
             gpio-controller;
             #gpio-cells = <2>;
 
-            rohm,charger-sense-resistor-ohms = <10000000>;
+            rohm,charger-sense-resistor-micro-ohms = <10000>;
 
             regulators {
                 buck1: buck1 {
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml
index 9fce8cd7b0b62..d24950ccea952 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml
+++ linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml
@@ -41,7 +41,7 @@ properties:
 patternProperties:
   "^sdhci@[0-9a-f]+$":
     type: object
-    $ref: mmc-controller.yaml
+    $ref: sdhci-common.yaml
     unevaluatedProperties: false
 
     properties:
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/mmc/mmc-controller.yaml linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
index 58ae298cd2fcf..23884b8184a9d 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
+++ linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
@@ -25,7 +25,7 @@ properties:
   "#address-cells":
     const: 1
     description: |
-      The cell is the slot ID if a function subnode is used.
+      The cell is the SDIO function number if a function subnode is used.
 
   "#size-cells":
     const: 0
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml
index 4d5f5cc6d031e..155719453b704 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml
+++ linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml
@@ -129,8 +129,6 @@ allOf:
     else:
       properties:
         spi-cpha: false
-      required:
-        - spi-cpol
 
 unevaluatedProperties: false
 
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/net/fsl,fec.yaml linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/net/fsl,fec.yaml
index b494e009326e0..9925563e5e148 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/net/fsl,fec.yaml
+++ linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/net/fsl,fec.yaml
@@ -182,6 +182,13 @@ properties:
     description:
       Register bits of stop mode control, the format is <&gpr req_gpr req_bit>.
 
+  fsl,pps-channel:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
+    description:
+      Specifies to which timer instance the PPS signal is routed.
+    enum: [0, 1, 2, 3]
+
   mdio:
     $ref: mdio.yaml#
     unevaluatedProperties: false
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/net/mediatek,net.yaml linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/net/mediatek,net.yaml
index e74502a0afe86..3202dc7967c5b 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/net/mediatek,net.yaml
+++ linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/net/mediatek,net.yaml
@@ -337,8 +337,8 @@ allOf:
           minItems: 4
 
         clocks:
-          minItems: 34
-          maxItems: 34
+          minItems: 24
+          maxItems: 24
 
         clock-names:
           items:
@@ -351,18 +351,6 @@ allOf:
             - const: ethwarp_wocpu1
             - const: ethwarp_wocpu0
             - const: esw
-            - const: netsys0
-            - const: netsys1
-            - const: sgmii_tx250m
-            - const: sgmii_rx250m
-            - const: sgmii2_tx250m
-            - const: sgmii2_rx250m
-            - const: top_usxgmii0_sel
-            - const: top_usxgmii1_sel
-            - const: top_sgm0_sel
-            - const: top_sgm1_sel
-            - const: top_xfi_phy0_xtal_sel
-            - const: top_xfi_phy1_xtal_sel
             - const: top_eth_gmii_sel
             - const: top_eth_refck_50m_sel
             - const: top_eth_sys_200m_sel
@@ -375,16 +363,10 @@ allOf:
             - const: top_netsys_sync_250m_sel
             - const: top_netsys_ppefb_250m_sel
             - const: top_netsys_warp_sel
-            - const: wocpu1
-            - const: wocpu0
             - const: xgp1
             - const: xgp2
             - const: xgp3
 
-        mediatek,sgmiisys:
-          minItems: 2
-          maxItems: 2
-
 patternProperties:
   "^mac@[0-1]$":
     type: object
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/net/nvidia,tegra234-mgbe.yaml linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/net/nvidia,tegra234-mgbe.yaml
index 2bd3efff2485e..215f14d1897d2 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/net/nvidia,tegra234-mgbe.yaml
+++ linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/net/nvidia,tegra234-mgbe.yaml
@@ -42,7 +42,7 @@ properties:
       - const: mgbe
       - const: mac
       - const: mac-divider
-      - const: ptp-ref
+      - const: ptp_ref
       - const: rx-input-m
       - const: rx-input
       - const: tx
@@ -133,7 +133,7 @@ examples:
                  <&bpmp TEGRA234_CLK_MGBE0_RX_PCS_M>,
                  <&bpmp TEGRA234_CLK_MGBE0_RX_PCS>,
                  <&bpmp TEGRA234_CLK_MGBE0_TX_PCS>;
-        clock-names = "mgbe", "mac", "mac-divider", "ptp-ref", "rx-input-m",
+        clock-names = "mgbe", "mac", "mac-divider", "ptp_ref", "rx-input-m",
                       "rx-input", "tx", "eee-pcs", "rx-pcs-input", "rx-pcs-m",
                       "rx-pcs", "tx-pcs";
         resets = <&bpmp TEGRA234_RESET_MGBE0_MAC>,
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/net/renesas,ether.yaml linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/net/renesas,ether.yaml
index 06b38c9bc6ec3..f1b0b03df8384 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/net/renesas,ether.yaml
+++ linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/net/renesas,ether.yaml
@@ -119,8 +119,7 @@ examples:
         #size-cells = <0>;
 
         phy1: ethernet-phy@1 {
-            compatible = "ethernet-phy-id0022.1537",
-                         "ethernet-phy-ieee802.3-c22";
+            compatible = "ethernet-phy-id0022.1537";
             reg = <1>;
             interrupt-parent = <&irqc0>;
             interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/net/snps,dwmac.yaml linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/net/snps,dwmac.yaml
index ddf9522a5dc23..5c2769dc689af 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/net/snps,dwmac.yaml
+++ linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/net/snps,dwmac.yaml
@@ -394,6 +394,11 @@ properties:
               When a PFC frame is received with priorities matching the bitmask,
               the queue is blocked from transmitting for the pause time specified
               in the PFC frame.
+
+          snps,coe-unsupported:
+            type: boolean
+            description: TX checksum offload is unsupported by the TX queue.
+
         allOf:
           - if:
               required:
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/net/xlnx,axi-ethernet.yaml linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/net/xlnx,axi-ethernet.yaml
index 1d33d80af11c3..f0d98c4705856 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/net/xlnx,axi-ethernet.yaml
+++ linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/net/xlnx,axi-ethernet.yaml
@@ -34,6 +34,7 @@ properties:
       and length of the AXI DMA controller IO space, unless
       axistream-connected is specified, in which case the reg
       attribute of the node referenced by it is used.
+    minItems: 1
     maxItems: 2
 
   interrupts:
@@ -60,7 +61,7 @@ properties:
       - gmii
       - rgmii
       - sgmii
-      - 1000BaseX
+      - 1000base-x
 
   xlnx,phy-type:
     description:
@@ -165,7 +166,7 @@ examples:
         clock-names = "s_axi_lite_clk", "axis_clk", "ref_clk", "mgt_clk";
         clocks = <&axi_clk>, <&axi_clk>, <&pl_enet_ref_clk>, <&mgt_clk>;
         phy-mode = "mii";
-        reg = <0x00 0x40000000 0x00 0x40000>;
+        reg = <0x40000000 0x40000>;
         xlnx,rxcsum = <0x2>;
         xlnx,rxmem = <0x800>;
         xlnx,txcsum = <0x2>;
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/nvmem/mxs-ocotp.yaml linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/nvmem/mxs-ocotp.yaml
index a9b822aeaa7ed..e436650f0faf7 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/nvmem/mxs-ocotp.yaml
+++ linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/nvmem/mxs-ocotp.yaml
@@ -14,9 +14,11 @@ allOf:
 
 properties:
   compatible:
-    enum:
-      - fsl,imx23-ocotp
-      - fsl,imx28-ocotp
+    items:
+      - enum:
+          - fsl,imx23-ocotp
+          - fsl,imx28-ocotp
+      - const: fsl,ocotp
 
   reg:
     maxItems: 1
@@ -34,7 +36,7 @@ unevaluatedProperties: false
 examples:
   - |
     ocotp: efuse@8002c000 {
-        compatible = "fsl,imx28-ocotp";
+        compatible = "fsl,imx28-ocotp", "fsl,ocotp";
         #address-cells = <1>;
         #size-cells = <1>;
         reg = <0x8002c000 0x2000>;
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/pci/amlogic,axg-pcie.yaml linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/pci/amlogic,axg-pcie.yaml
index a5bd90bc0712e..9c3b8e65c42a3 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/pci/amlogic,axg-pcie.yaml
+++ linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/pci/amlogic,axg-pcie.yaml
@@ -36,13 +36,13 @@ properties:
 
   reg:
     items:
-      - description: External local bus interface registers
+      - description: Data Bus Interface registers
       - description: Meson designed configuration registers
       - description: PCIe configuration space
 
   reg-names:
     items:
-      - const: elbi
+      - const: dbi
       - const: cfg
       - const: config
 
@@ -113,7 +113,7 @@ examples:
     pcie: pcie@f9800000 {
         compatible = "amlogic,axg-pcie", "snps,dw-pcie";
         reg = <0xf9800000 0x400000>, <0xff646000 0x2000>, <0xf9f00000 0x100000>;
-        reg-names = "elbi", "cfg", "config";
+        reg-names = "dbi", "cfg", "config";
         interrupts = <GIC_SPI 177 IRQ_TYPE_EDGE_RISING>;
         clocks = <&pclk>, <&clk_port>, <&clk_phy>;
         clock-names = "pclk", "port", "general";
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/pci/rcar-pci-host.yaml linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/pci/rcar-pci-host.yaml
index 8fdfbc763d704..835b6db00c279 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/pci/rcar-pci-host.yaml
+++ linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/pci/rcar-pci-host.yaml
@@ -68,6 +68,18 @@ properties:
   phy-names:
     const: pcie
 
+  vpcie1v5-supply:
+    description: The 1.5v regulator to use for PCIe.
+
+  vpcie3v3-supply:
+    description: The 3.3v regulator to use for PCIe.
+
+  vpcie12v-supply:
+    description: The 12v regulator to use for PCIe.
+
+  iommu-map: true
+  iommu-map-mask: true
+
 required:
   - compatible
   - reg
@@ -121,5 +133,7 @@ examples:
              clock-names = "pcie", "pcie_bus";
              power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
              resets = <&cpg 319>;
+             vpcie3v3-supply = <&pcie_3v3>;
+             vpcie12v-supply = <&pcie_12v>;
          };
     };
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie.yaml linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie.yaml
index 531008f0b6ac3..002b728cbc718 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie.yaml
+++ linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie.yaml
@@ -37,6 +37,7 @@ properties:
     description: This property is needed if using 24MHz OSC for RC's PHY.
 
   ep-gpios:
+    maxItems: 1
     description: pre-reset GPIO
 
   vpcie12v-supply:
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml
index dc3a3f709feaa..bac4d0b51d8a1 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml
+++ linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml
@@ -58,8 +58,7 @@ properties:
   fsl,phy-tx-vboost-level-microvolt:
     description:
       Adjust the boosted transmit launch pk-pk differential amplitude
-    minimum: 880
-    maximum: 1120
+    enum: [844, 1008, 1156]
 
   fsl,phy-comp-dis-tune-percent:
     description:
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml
index d981d77e82e40..a6244c33faf61 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml
+++ linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml
@@ -71,7 +71,6 @@ required:
   - reg
   - clocks
   - clock-names
-  - power-domains
   - resets
   - reset-names
   - vdda-phy-supply
@@ -130,6 +129,21 @@ allOf:
         clock-names:
           maxItems: 1
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8996-qmp-ufs-phy
+              - qcom,msm8998-qmp-ufs-phy
+    then:
+      properties:
+        power-domains:
+          false
+    else:
+      required:
+        - power-domains
+
 additionalProperties: false
 
 examples:
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml
index 9af203dc8793f..fa7408eb74895 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml
+++ linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml
@@ -62,12 +62,12 @@ properties:
   "#clock-cells":
     const: 1
     description:
-      See include/dt-bindings/dt-bindings/phy/phy-qcom-qmp.h
+      See include/dt-bindings/phy/phy-qcom-qmp.h
 
   "#phy-cells":
     const: 1
     description:
-      See include/dt-bindings/dt-bindings/phy/phy-qcom-qmp.h
+      See include/dt-bindings/phy/phy-qcom-qmp.h
 
   orientation-switch:
     description:
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-repeater.yaml linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-repeater.yaml
index 029569d5fcf35..24c733c10e0e9 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-repeater.yaml
+++ linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-repeater.yaml
@@ -32,6 +32,27 @@ properties:
 
   vdd3-supply: true
 
+  qcom,tune-usb2-disc-thres:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    description: High-Speed disconnect threshold
+    minimum: 0
+    maximum: 7
+    default: 0
+
+  qcom,tune-usb2-amplitude:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    description: High-Speed trasmit amplitude
+    minimum: 0
+    maximum: 15
+    default: 8
+
+  qcom,tune-usb2-preem:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    description: High-Speed TX pre-emphasis tuning
+    minimum: 0
+    maximum: 7
+    default: 5
+
 required:
   - compatible
   - reg
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml
index 0f200e3f97a9a..fce7f8a19e9c0 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml
+++ linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml
@@ -15,9 +15,6 @@ description: |
 properties:
   compatible:
     oneOf:
-      - enum:
-          - qcom,sc8180x-usb-hs-phy
-          - qcom,usb-snps-femto-v2-phy
       - items:
           - enum:
               - qcom,sa8775p-usb-hs-phy
@@ -26,6 +23,7 @@ properties:
       - items:
           - enum:
               - qcom,sc7280-usb-hs-phy
+              - qcom,sc8180x-usb-hs-phy
               - qcom,sdx55-usb-hs-phy
               - qcom,sdx65-usb-hs-phy
               - qcom,sm6375-usb-hs-phy
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/phy/rockchip-inno-csi-dphy.yaml linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/phy/rockchip-inno-csi-dphy.yaml
index 5ac994b3c0aa1..b304bc5a08c40 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/phy/rockchip-inno-csi-dphy.yaml
+++ linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/phy/rockchip-inno-csi-dphy.yaml
@@ -57,11 +57,24 @@ required:
   - clocks
   - clock-names
   - '#phy-cells'
-  - power-domains
   - resets
   - reset-names
   - rockchip,grf
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - rockchip,px30-csi-dphy
+              - rockchip,rk1808-csi-dphy
+              - rockchip,rk3326-csi-dphy
+              - rockchip,rk3368-csi-dphy
+    then:
+      required:
+        - power-domains
+
 additionalProperties: false
 
 examples:
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml
index bd72a326e6e06..60f30a59f3853 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml
+++ linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml
@@ -97,7 +97,8 @@ patternProperties:
             then:
               properties:
                 groups:
-                  enum: [emmc, emmc_rst]
+                  items:
+                    enum: [emmc, emmc_rst]
           - if:
               properties:
                 function:
@@ -105,8 +106,9 @@ patternProperties:
             then:
               properties:
                 groups:
-                  enum: [esw, esw_p0_p1, esw_p2_p3_p4, rgmii_via_esw,
-                         rgmii_via_gmac1, rgmii_via_gmac2, mdc_mdio]
+                  items:
+                    enum: [esw, esw_p0_p1, esw_p2_p3_p4, rgmii_via_esw,
+                           rgmii_via_gmac1, rgmii_via_gmac2, mdc_mdio]
           - if:
               properties:
                 function:
@@ -123,10 +125,11 @@ patternProperties:
             then:
               properties:
                 groups:
-                  enum: [i2s_in_mclk_bclk_ws, i2s1_in_data, i2s2_in_data,
-                         i2s3_in_data, i2s4_in_data, i2s_out_mclk_bclk_ws,
-                         i2s1_out_data, i2s2_out_data, i2s3_out_data,
-                         i2s4_out_data]
+                  items:
+                    enum: [i2s_in_mclk_bclk_ws, i2s1_in_data, i2s2_in_data,
+                           i2s3_in_data, i2s4_in_data, i2s_out_mclk_bclk_ws,
+                           i2s1_out_data, i2s2_out_data, i2s3_out_data,
+                           i2s4_out_data]
           - if:
               properties:
                 function:
@@ -159,10 +162,11 @@ patternProperties:
             then:
               properties:
                 groups:
-                  enum: [pcie0_0_waken, pcie0_1_waken, pcie1_0_waken,
-                         pcie0_0_clkreq, pcie0_1_clkreq, pcie1_0_clkreq,
-                         pcie0_pad_perst, pcie1_pad_perst, pcie_pereset,
-                         pcie_wake, pcie_clkreq]
+                  items:
+                    enum: [pcie0_0_waken, pcie0_1_waken, pcie1_0_waken,
+                           pcie0_0_clkreq, pcie0_1_clkreq, pcie1_0_clkreq,
+                           pcie0_pad_perst, pcie1_pad_perst, pcie_pereset,
+                           pcie_wake, pcie_clkreq]
           - if:
               properties:
                 function:
@@ -178,11 +182,12 @@ patternProperties:
             then:
               properties:
                 groups:
-                  enum: [pwm_ch1_0, pwm_ch1_1, pwm_ch1_2, pwm_ch2_0, pwm_ch2_1,
-                         pwm_ch2_2, pwm_ch3_0, pwm_ch3_1, pwm_ch3_2, pwm_ch4_0,
-                         pwm_ch4_1, pwm_ch4_2, pwm_ch4_3, pwm_ch5_0, pwm_ch5_1,
-                         pwm_ch5_2, pwm_ch6_0, pwm_ch6_1, pwm_ch6_2, pwm_ch6_3,
-                         pwm_ch7_0, pwm_0, pwm_1]
+                  items:
+                    enum: [pwm_ch1_0, pwm_ch1_1, pwm_ch1_2, pwm_ch2_0, pwm_ch2_1,
+                           pwm_ch2_2, pwm_ch3_0, pwm_ch3_1, pwm_ch3_2, pwm_ch4_0,
+                           pwm_ch4_1, pwm_ch4_2, pwm_ch4_3, pwm_ch5_0, pwm_ch5_1,
+                           pwm_ch5_2, pwm_ch6_0, pwm_ch6_1, pwm_ch6_2, pwm_ch6_3,
+                           pwm_ch7_0, pwm_0, pwm_1]
           - if:
               properties:
                 function:
@@ -260,33 +265,34 @@ patternProperties:
           pins:
             description:
               An array of strings. Each string contains the name of a pin.
-            enum: [GPIO_A, I2S1_IN, I2S1_OUT, I2S_BCLK, I2S_WS, I2S_MCLK, TXD0,
-                   RXD0, SPI_WP, SPI_HOLD, SPI_CLK, SPI_MOSI, SPI_MISO, SPI_CS,
-                   I2C_SDA, I2C_SCL, I2S2_IN, I2S3_IN, I2S4_IN, I2S2_OUT,
-                   I2S3_OUT, I2S4_OUT, GPIO_B, MDC, MDIO, G2_TXD0, G2_TXD1,
-                   G2_TXD2, G2_TXD3, G2_TXEN, G2_TXC, G2_RXD0, G2_RXD1, G2_RXD2,
-                   G2_RXD3, G2_RXDV, G2_RXC, NCEB, NWEB, NREB, NDL4, NDL5, NDL6,
-                   NDL7, NRB, NCLE, NALE, NDL0, NDL1, NDL2, NDL3, MDI_TP_P0,
-                   MDI_TN_P0, MDI_RP_P0, MDI_RN_P0, MDI_TP_P1, MDI_TN_P1,
-                   MDI_RP_P1, MDI_RN_P1, MDI_RP_P2, MDI_RN_P2, MDI_TP_P2,
-                   MDI_TN_P2, MDI_TP_P3, MDI_TN_P3, MDI_RP_P3, MDI_RN_P3,
-                   MDI_RP_P4, MDI_RN_P4, MDI_TP_P4, MDI_TN_P4, PMIC_SCL,
-                   PMIC_SDA, SPIC1_CLK, SPIC1_MOSI, SPIC1_MISO, SPIC1_CS,
-                   GPIO_D, WATCHDOG, RTS3_N, CTS3_N, TXD3, RXD3, PERST0_N,
-                   PERST1_N, WLED_N, EPHY_LED0_N, AUXIN0, AUXIN1, AUXIN2,
-                   AUXIN3, TXD4, RXD4, RTS4_N, CST4_N, PWM1, PWM2, PWM3, PWM4,
-                   PWM5, PWM6, PWM7, GPIO_E, TOP_5G_CLK, TOP_5G_DATA,
-                   WF0_5G_HB0, WF0_5G_HB1, WF0_5G_HB2, WF0_5G_HB3, WF0_5G_HB4,
-                   WF0_5G_HB5, WF0_5G_HB6, XO_REQ, TOP_RST_N, SYS_WATCHDOG,
-                   EPHY_LED0_N_JTDO, EPHY_LED1_N_JTDI, EPHY_LED2_N_JTMS,
-                   EPHY_LED3_N_JTCLK, EPHY_LED4_N_JTRST_N, WF2G_LED_N,
-                   WF5G_LED_N, GPIO_9, GPIO_10, GPIO_11, GPIO_12, UART1_TXD,
-                   UART1_RXD, UART1_CTS, UART1_RTS, UART2_TXD, UART2_RXD,
-                   UART2_CTS, UART2_RTS, SMI_MDC, SMI_MDIO, PCIE_PERESET_N,
-                   PWM_0, GPIO_0, GPIO_1, GPIO_2, GPIO_3, GPIO_4, GPIO_5,
-                   GPIO_6, GPIO_7, GPIO_8, UART0_TXD, UART0_RXD, TOP_2G_CLK,
-                   TOP_2G_DATA, WF0_2G_HB0, WF0_2G_HB1, WF0_2G_HB2, WF0_2G_HB3,
-                   WF0_2G_HB4, WF0_2G_HB5, WF0_2G_HB6]
+            items:
+              enum: [GPIO_A, I2S1_IN, I2S1_OUT, I2S_BCLK, I2S_WS, I2S_MCLK, TXD0,
+                     RXD0, SPI_WP, SPI_HOLD, SPI_CLK, SPI_MOSI, SPI_MISO, SPI_CS,
+                     I2C_SDA, I2C_SCL, I2S2_IN, I2S3_IN, I2S4_IN, I2S2_OUT,
+                     I2S3_OUT, I2S4_OUT, GPIO_B, MDC, MDIO, G2_TXD0, G2_TXD1,
+                     G2_TXD2, G2_TXD3, G2_TXEN, G2_TXC, G2_RXD0, G2_RXD1, G2_RXD2,
+                     G2_RXD3, G2_RXDV, G2_RXC, NCEB, NWEB, NREB, NDL4, NDL5, NDL6,
+                     NDL7, NRB, NCLE, NALE, NDL0, NDL1, NDL2, NDL3, MDI_TP_P0,
+                     MDI_TN_P0, MDI_RP_P0, MDI_RN_P0, MDI_TP_P1, MDI_TN_P1,
+                     MDI_RP_P1, MDI_RN_P1, MDI_RP_P2, MDI_RN_P2, MDI_TP_P2,
+                     MDI_TN_P2, MDI_TP_P3, MDI_TN_P3, MDI_RP_P3, MDI_RN_P3,
+                     MDI_RP_P4, MDI_RN_P4, MDI_TP_P4, MDI_TN_P4, PMIC_SCL,
+                     PMIC_SDA, SPIC1_CLK, SPIC1_MOSI, SPIC1_MISO, SPIC1_CS,
+                     GPIO_D, WATCHDOG, RTS3_N, CTS3_N, TXD3, RXD3, PERST0_N,
+                     PERST1_N, WLED_N, EPHY_LED0_N, AUXIN0, AUXIN1, AUXIN2,
+                     AUXIN3, TXD4, RXD4, RTS4_N, CST4_N, PWM1, PWM2, PWM3, PWM4,
+                     PWM5, PWM6, PWM7, GPIO_E, TOP_5G_CLK, TOP_5G_DATA,
+                     WF0_5G_HB0, WF0_5G_HB1, WF0_5G_HB2, WF0_5G_HB3, WF0_5G_HB4,
+                     WF0_5G_HB5, WF0_5G_HB6, XO_REQ, TOP_RST_N, SYS_WATCHDOG,
+                     EPHY_LED0_N_JTDO, EPHY_LED1_N_JTDI, EPHY_LED2_N_JTMS,
+                     EPHY_LED3_N_JTCLK, EPHY_LED4_N_JTRST_N, WF2G_LED_N,
+                     WF5G_LED_N, GPIO_9, GPIO_10, GPIO_11, GPIO_12, UART1_TXD,
+                     UART1_RXD, UART1_CTS, UART1_RTS, UART2_TXD, UART2_RXD,
+                     UART2_CTS, UART2_RTS, SMI_MDC, SMI_MDIO, PCIE_PERESET_N,
+                     PWM_0, GPIO_0, GPIO_1, GPIO_2, GPIO_3, GPIO_4, GPIO_5,
+                     GPIO_6, GPIO_7, GPIO_8, UART0_TXD, UART0_RXD, TOP_2G_CLK,
+                     TOP_2G_DATA, WF0_2G_HB0, WF0_2G_HB1, WF0_2G_HB2, WF0_2G_HB3,
+                     WF0_2G_HB4, WF0_2G_HB5, WF0_2G_HB6]
 
           bias-disable: true
 
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux-aon.yaml linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux-aon.yaml
index f3deda9f7127f..3c19147af91e3 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux-aon.yaml
+++ linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux-aon.yaml
@@ -55,6 +55,10 @@ patternProperties:
                     drive_soc_gpio27_pee6, drive_ao_retention_n_pee2,
                     drive_vcomp_alert_pee1, drive_hdmi_cec_pgg0 ]
 
+required:
+  - compatible
+  - reg
+
 unevaluatedProperties: false
 
 examples:
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux.yaml linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux.yaml
index 17b865ecfcdaa..4f79dbc1bde66 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux.yaml
+++ linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux.yaml
@@ -112,6 +112,10 @@ patternProperties:
                     drive_sdmmc1_dat2_pj4, drive_sdmmc1_dat1_pj3,
                     drive_sdmmc1_dat0_pj2 ]
 
+required:
+  - compatible
+  - reg
+
 unevaluatedProperties: false
 
 examples:
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/pinctrl/toshiba,visconti-pinctrl.yaml linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/pinctrl/toshiba,visconti-pinctrl.yaml
index 19d47fd414bc0..ce04d2eadec9d 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/pinctrl/toshiba,visconti-pinctrl.yaml
+++ linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/pinctrl/toshiba,visconti-pinctrl.yaml
@@ -50,18 +50,20 @@ patternProperties:
       groups:
         description:
           Name of the pin group to use for the functions.
-        $ref: /schemas/types.yaml#/definitions/string
-        enum: [i2c0_grp, i2c1_grp, i2c2_grp, i2c3_grp, i2c4_grp,
-               i2c5_grp, i2c6_grp, i2c7_grp, i2c8_grp,
-               spi0_grp, spi0_cs0_grp, spi0_cs1_grp, spi0_cs2_grp,
-               spi1_grp, spi2_grp, spi3_grp, spi4_grp, spi5_grp, spi6_grp,
-               uart0_grp, uart1_grp, uart2_grp, uart3_grp,
-               pwm0_gpio4_grp, pwm0_gpio8_grp, pwm0_gpio12_grp,
-               pwm0_gpio16_grp, pwm1_gpio5_grp, pwm1_gpio9_grp,
-               pwm1_gpio13_grp, pwm1_gpio17_grp, pwm2_gpio6_grp,
-               pwm2_gpio10_grp, pwm2_gpio14_grp, pwm2_gpio18_grp,
-               pwm3_gpio7_grp, pwm3_gpio11_grp, pwm3_gpio15_grp,
-               pwm3_gpio19_grp, pcmif_out_grp, pcmif_in_grp]
+        items:
+          enum: [i2c0_grp, i2c1_grp, i2c2_grp, i2c3_grp, i2c4_grp,
+                 i2c5_grp, i2c6_grp, i2c7_grp, i2c8_grp,
+                 spi0_grp, spi0_cs0_grp, spi0_cs1_grp, spi0_cs2_grp,
+                 spi1_grp, spi2_grp, spi3_grp, spi4_grp, spi5_grp, spi6_grp,
+                 uart0_grp, uart1_grp, uart2_grp, uart3_grp,
+                 pwm0_gpio4_grp, pwm0_gpio8_grp, pwm0_gpio12_grp,
+                 pwm0_gpio16_grp, pwm1_gpio5_grp, pwm1_gpio9_grp,
+                 pwm1_gpio13_grp, pwm1_gpio17_grp, pwm2_gpio6_grp,
+                 pwm2_gpio10_grp, pwm2_gpio14_grp, pwm2_gpio18_grp,
+                 pwm3_gpio7_grp, pwm3_gpio11_grp, pwm3_gpio15_grp,
+                 pwm3_gpio19_grp, pcmif_out_grp, pcmif_in_grp]
+        minItems: 1
+        maxItems: 8
 
       drive-strength:
         enum: [2, 4, 6, 8, 16, 24, 32]
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml
index 9b03c41d3604e..bb01bf5663f37 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml
+++ linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml
@@ -15,42 +15,53 @@ description:
 
 properties:
   compatible:
-    enum:
-      - qcom,mdm9607-rpmpd
-      - qcom,msm8226-rpmpd
-      - qcom,msm8909-rpmpd
-      - qcom,msm8916-rpmpd
-      - qcom,msm8939-rpmpd
-      - qcom,msm8953-rpmpd
-      - qcom,msm8976-rpmpd
-      - qcom,msm8994-rpmpd
-      - qcom,msm8996-rpmpd
-      - qcom,msm8998-rpmpd
-      - qcom,qcm2290-rpmpd
-      - qcom,qcs404-rpmpd
-      - qcom,qdu1000-rpmhpd
-      - qcom,sa8155p-rpmhpd
-      - qcom,sa8540p-rpmhpd
-      - qcom,sa8775p-rpmhpd
-      - qcom,sdm660-rpmpd
-      - qcom,sc7180-rpmhpd
-      - qcom,sc7280-rpmhpd
-      - qcom,sc8180x-rpmhpd
-      - qcom,sc8280xp-rpmhpd
-      - qcom,sdm670-rpmhpd
-      - qcom,sdm845-rpmhpd
-      - qcom,sdx55-rpmhpd
-      - qcom,sdx65-rpmhpd
-      - qcom,sdx75-rpmhpd
-      - qcom,sm6115-rpmpd
-      - qcom,sm6125-rpmpd
-      - qcom,sm6350-rpmhpd
-      - qcom,sm6375-rpmpd
-      - qcom,sm8150-rpmhpd
-      - qcom,sm8250-rpmhpd
-      - qcom,sm8350-rpmhpd
-      - qcom,sm8450-rpmhpd
-      - qcom,sm8550-rpmhpd
+    oneOf:
+      - enum:
+          - qcom,mdm9607-rpmpd
+          - qcom,msm8226-rpmpd
+          - qcom,msm8909-rpmpd
+          - qcom,msm8916-rpmpd
+          - qcom,msm8917-rpmpd
+          - qcom,msm8939-rpmpd
+          - qcom,msm8953-rpmpd
+          - qcom,msm8976-rpmpd
+          - qcom,msm8994-rpmpd
+          - qcom,msm8996-rpmpd
+          - qcom,msm8998-rpmpd
+          - qcom,qcm2290-rpmpd
+          - qcom,qcs404-rpmpd
+          - qcom,qdu1000-rpmhpd
+          - qcom,qm215-rpmpd
+          - qcom,sa8155p-rpmhpd
+          - qcom,sa8540p-rpmhpd
+          - qcom,sa8775p-rpmhpd
+          - qcom,sc7180-rpmhpd
+          - qcom,sc7280-rpmhpd
+          - qcom,sc8180x-rpmhpd
+          - qcom,sc8280xp-rpmhpd
+          - qcom,sdm660-rpmpd
+          - qcom,sdm670-rpmhpd
+          - qcom,sdm845-rpmhpd
+          - qcom,sdx55-rpmhpd
+          - qcom,sdx65-rpmhpd
+          - qcom,sdx75-rpmhpd
+          - qcom,sm6115-rpmpd
+          - qcom,sm6125-rpmpd
+          - qcom,sm6350-rpmhpd
+          - qcom,sm6375-rpmpd
+          - qcom,sm7150-rpmhpd
+          - qcom,sm8150-rpmhpd
+          - qcom,sm8250-rpmhpd
+          - qcom,sm8350-rpmhpd
+          - qcom,sm8450-rpmhpd
+          - qcom,sm8550-rpmhpd
+          - qcom,sm8650-rpmhpd
+          - qcom,sm8750-rpmhpd
+          - qcom,x1e80100-rpmhpd
+      - items:
+          - enum:
+              - qcom,msm8937-rpmpd
+          - const: qcom,msm8917-rpmpd
 
   '#power-domain-cells':
     const: 1
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/regulator/mediatek,mt6357-regulator.yaml linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/regulator/mediatek,mt6357-regulator.yaml
index 6327bb2f6ee08..698266c09e253 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/regulator/mediatek,mt6357-regulator.yaml
+++ linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/regulator/mediatek,mt6357-regulator.yaml
@@ -33,7 +33,7 @@ patternProperties:
 
   "^ldo-v(camio18|aud28|aux18|io18|io28|rf12|rf18|cn18|cn28|fe28)$":
     type: object
-    $ref: fixed-regulator.yaml#
+    $ref: regulator.yaml#
     unevaluatedProperties: false
     description:
       Properties for single fixed LDO regulator.
@@ -112,7 +112,6 @@ examples:
           regulator-enable-ramp-delay = <220>;
         };
         mt6357_vfe28_reg: ldo-vfe28 {
-          compatible = "regulator-fixed";
           regulator-name = "vfe28";
           regulator-min-microvolt = <2800000>;
           regulator-max-microvolt = <2800000>;
@@ -125,14 +124,12 @@ examples:
           regulator-enable-ramp-delay = <110>;
         };
         mt6357_vrf18_reg: ldo-vrf18 {
-          compatible = "regulator-fixed";
           regulator-name = "vrf18";
           regulator-min-microvolt = <1800000>;
           regulator-max-microvolt = <1800000>;
           regulator-enable-ramp-delay = <110>;
         };
         mt6357_vrf12_reg: ldo-vrf12 {
-          compatible = "regulator-fixed";
           regulator-name = "vrf12";
           regulator-min-microvolt = <1200000>;
           regulator-max-microvolt = <1200000>;
@@ -157,14 +154,12 @@ examples:
           regulator-enable-ramp-delay = <264>;
         };
         mt6357_vcn28_reg: ldo-vcn28 {
-          compatible = "regulator-fixed";
           regulator-name = "vcn28";
           regulator-min-microvolt = <2800000>;
           regulator-max-microvolt = <2800000>;
           regulator-enable-ramp-delay = <264>;
         };
         mt6357_vcn18_reg: ldo-vcn18 {
-          compatible = "regulator-fixed";
           regulator-name = "vcn18";
           regulator-min-microvolt = <1800000>;
           regulator-max-microvolt = <1800000>;
@@ -183,7 +178,6 @@ examples:
           regulator-enable-ramp-delay = <264>;
         };
         mt6357_vcamio_reg: ldo-vcamio18 {
-          compatible = "regulator-fixed";
           regulator-name = "vcamio";
           regulator-min-microvolt = <1800000>;
           regulator-max-microvolt = <1800000>;
@@ -212,28 +206,24 @@ examples:
           regulator-always-on;
         };
         mt6357_vaux18_reg: ldo-vaux18 {
-          compatible = "regulator-fixed";
           regulator-name = "vaux18";
           regulator-min-microvolt = <1800000>;
           regulator-max-microvolt = <1800000>;
           regulator-enable-ramp-delay = <264>;
         };
         mt6357_vaud28_reg: ldo-vaud28 {
-          compatible = "regulator-fixed";
           regulator-name = "vaud28";
           regulator-min-microvolt = <2800000>;
           regulator-max-microvolt = <2800000>;
           regulator-enable-ramp-delay = <264>;
         };
         mt6357_vio28_reg: ldo-vio28 {
-          compatible = "regulator-fixed";
           regulator-name = "vio28";
           regulator-min-microvolt = <2800000>;
           regulator-max-microvolt = <2800000>;
           regulator-enable-ramp-delay = <264>;
         };
         mt6357_vio18_reg: ldo-vio18 {
-          compatible = "regulator-fixed";
           regulator-name = "vio18";
           regulator-min-microvolt = <1800000>;
           regulator-max-microvolt = <1800000>;
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml
index 6317daf76d1fb..2bed57a347827 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml
+++ linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml
@@ -31,10 +31,6 @@ properties:
         $ref: regulator.yaml#
         unevaluatedProperties: false
 
-        properties:
-          regulator-compatible:
-            pattern: "^vbuck[1-4]$"
-
     additionalProperties: false
 
 required:
@@ -52,7 +48,6 @@ examples:
 
       regulators {
         vbuck1 {
-          regulator-compatible = "vbuck1";
           regulator-min-microvolt = <300000>;
           regulator-max-microvolt = <1193750>;
           regulator-enable-ramp-delay = <256>;
@@ -60,7 +55,6 @@ examples:
         };
 
         vbuck3 {
-          regulator-compatible = "vbuck3";
           regulator-min-microvolt = <300000>;
           regulator-max-microvolt = <1193750>;
           regulator-enable-ramp-delay = <256>;
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/regulator/mt6359-regulator.yaml linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/regulator/mt6359-regulator.yaml
index d6b3b5a5c0b34..5e4b1e7417950 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/regulator/mt6359-regulator.yaml
+++ linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/regulator/mt6359-regulator.yaml
@@ -18,84 +18,41 @@ patternProperties:
   "^buck_v(s1|gpu11|modem|pu|core|s2|pa|proc2|proc1|core_sshub)$":
     type: object
     $ref: regulator.yaml#
-
-    properties:
-      regulator-name:
-        pattern: "^v(s1|gpu11|modem|pu|core|s2|pa|proc2|proc1|core_sshub)$"
-
     unevaluatedProperties: false
 
   "^ldo_v(ibr|rf12|usb|camio|efuse|xo22)$":
     type: object
     $ref: regulator.yaml#
-
-    properties:
-      regulator-name:
-        pattern: "^v(ibr|rf12|usb|camio|efuse|xo22)$"
-
     unevaluatedProperties: false
 
   "^ldo_v(rfck|emc|a12|a09|ufs|bbck)$":
     type: object
     $ref: regulator.yaml#
-
-    properties:
-      regulator-name:
-        pattern: "^v(rfck|emc|a12|a09|ufs|bbck)$"
-
     unevaluatedProperties: false
 
   "^ldo_vcn(18|13|33_1_bt|13_1_wifi|33_2_bt|33_2_wifi)$":
     type: object
     $ref: regulator.yaml#
-
-    properties:
-      regulator-name:
-        pattern: "^vcn(18|13|33_1_bt|13_1_wifi|33_2_bt|33_2_wifi)$"
-
     unevaluatedProperties: false
 
   "^ldo_vsram_(proc2|others|md|proc1|others_sshub)$":
     type: object
     $ref: regulator.yaml#
-
-    properties:
-      regulator-name:
-        pattern: "^vsram_(proc2|others|md|proc1|others_sshub)$"
-
     unevaluatedProperties: false
 
   "^ldo_v(fe|bif|io)28$":
     type: object
     $ref: regulator.yaml#
-
-    properties:
-      regulator-name:
-        pattern: "^v(fe|bif|io)28$"
-
     unevaluatedProperties: false
 
   "^ldo_v(aud|io|aux|rf|m)18$":
     type: object
     $ref: regulator.yaml#
-
-    properties:
-      regulator-name:
-        pattern: "^v(aud|io|aux|rf|m)18$"
-
     unevaluatedProperties: false
 
   "^ldo_vsim[12]$":
     type: object
     $ref: regulator.yaml#
-
-    properties:
-      regulator-name:
-        pattern: "^vsim[12]$"
-
-    required:
-      - regulator-name
-
     unevaluatedProperties: false
 
 additionalProperties: false
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml
index 9ea8ac0786acc..a72175a0910ba 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml
+++ linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml
@@ -22,7 +22,7 @@ description:
   Each sub-node is identified using the node's name, with valid values listed
   for each of the pmics below.
 
-  For mp5496, s1, s2
+  For mp5496, s1, s2, l2, l5
 
   For pm2250, s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11,
   l12, l13, l14, l15, l16, l17, l18, l19, l20, l21, l22
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/serial/8250.yaml linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/serial/8250.yaml
index 692aa05500fd5..6ba0325039be2 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/serial/8250.yaml
+++ linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/serial/8250.yaml
@@ -45,7 +45,7 @@ allOf:
                   - ns16550
                   - ns16550a
     then:
-      anyOf:
+      oneOf:
         - required: [ clock-frequency ]
         - required: [ clocks ]
 
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/serial/brcm,bcm7271-uart.yaml linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/serial/brcm,bcm7271-uart.yaml
index 89c462653e2d3..8cc848ae11cb7 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/serial/brcm,bcm7271-uart.yaml
+++ linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/serial/brcm,bcm7271-uart.yaml
@@ -41,7 +41,7 @@ properties:
           - const: dma_intr2
 
   clocks:
-    minItems: 1
+    maxItems: 1
 
   clock-names:
     const: sw_baud
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/serial/rs485.yaml linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/serial/rs485.yaml
index 303a443d9e29b..b93254ad2a287 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/serial/rs485.yaml
+++ linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/serial/rs485.yaml
@@ -18,16 +18,19 @@ properties:
     description: prop-encoded-array <a b>
     $ref: /schemas/types.yaml#/definitions/uint32-array
     items:
-      items:
-        - description: Delay between rts signal and beginning of data sent in
-            milliseconds. It corresponds to the delay before sending data.
-          default: 0
-          maximum: 100
-        - description: Delay between end of data sent and rts signal in milliseconds.
-            It corresponds to the delay after sending data and actual release
-            of the line.
-          default: 0
-          maximum: 100
+      - description: Delay between rts signal and beginning of data sent in
+          milliseconds. It corresponds to the delay before sending data.
+        default: 0
+        maximum: 100
+      - description: Delay between end of data sent and rts signal in milliseconds.
+          It corresponds to the delay after sending data and actual release
+          of the line.
+        default: 0
+        maximum: 100
+
+  rs485-rts-active-high:
+    description: drive RTS high when sending (this is the default).
+    $ref: /schemas/types.yaml#/definitions/flag
 
   rs485-rts-active-low:
     description: drive RTS low when sending (default is high).
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/serial/serial.yaml linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/serial/serial.yaml
index ea277560a5966..5727bd549deca 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/serial/serial.yaml
+++ linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/serial/serial.yaml
@@ -96,7 +96,7 @@ then:
     rts-gpios: false
 
 patternProperties:
-  "^bluetooth|gnss|gps|mcu$":
+  "^(bluetooth|gnss|gps|mcu)$":
     if:
       type: object
     then:
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/soc/rockchip/grf.yaml linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/soc/rockchip/grf.yaml
index e4fa6a07b4fa2..be6ffec2b0749 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/soc/rockchip/grf.yaml
+++ linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/soc/rockchip/grf.yaml
@@ -163,6 +163,7 @@ allOf:
           unevaluatedProperties: false
 
         pcie-phy:
+          type: object
           description:
             Documentation/devicetree/bindings/phy/rockchip-pcie-phy.txt
 
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/sound/asahi-kasei,ak4458.yaml linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/sound/asahi-kasei,ak4458.yaml
index 4477f84b7acc0..e44801ddbd2a9 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/sound/asahi-kasei,ak4458.yaml
+++ linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/sound/asahi-kasei,ak4458.yaml
@@ -18,10 +18,10 @@ properties:
   reg:
     maxItems: 1
 
-  avdd-supply:
+  AVDD-supply:
     description: Analog power supply
 
-  dvdd-supply:
+  DVDD-supply:
     description: Digital power supply
 
   reset-gpios:
@@ -56,7 +56,7 @@ allOf:
       properties:
         dsd-path: false
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/sound/asahi-kasei,ak5558.yaml linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/sound/asahi-kasei,ak5558.yaml
index d3d494ae8abfe..dc8f85f266bf3 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/sound/asahi-kasei,ak5558.yaml
+++ linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/sound/asahi-kasei,ak5558.yaml
@@ -19,10 +19,10 @@ properties:
   reg:
     maxItems: 1
 
-  avdd-supply:
+  AVDD-supply:
     description: A 1.8V supply that powers up the AVDD pin.
 
-  dvdd-supply:
+  DVDD-supply:
     description: A 1.2V supply that powers up the DVDD pin.
 
   reset-gpios:
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.yaml linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.yaml
index 7735e08d35ba1..beef193aaaeba 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.yaml
+++ linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.yaml
@@ -102,21 +102,21 @@ properties:
     default: 2
 
   interrupts:
-    anyOf:
-      - minItems: 1
-        items:
-          - description: TX interrupt
-          - description: RX interrupt
-      - items:
-          - description: common/combined interrupt
+    minItems: 1
+    maxItems: 2
 
   interrupt-names:
     oneOf:
-      - minItems: 1
+      - description: TX interrupt
+        const: tx
+      - description: RX interrupt
+        const: rx
+      - description: TX and RX interrupts
         items:
           - const: tx
           - const: rx
-      - const: common
+      - description: Common/combined interrupt
+        const: common
 
   fck_parent:
     $ref: /schemas/types.yaml#/definitions/string
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/sound/mt6359.yaml linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/sound/mt6359.yaml
index 23d411fc4200e..128698630c865 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/sound/mt6359.yaml
+++ linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/sound/mt6359.yaml
@@ -23,8 +23,8 @@ properties:
       Indicates how many data pins are used to transmit two channels of PDM
       signal. 0 means two wires, 1 means one wire. Default value is 0.
     enum:
-      - 0 # one wire
-      - 1 # two wires
+      - 0 # two wires
+      - 1 # one wire
 
   mediatek,mic-type-0:
     $ref: /schemas/types.yaml#/definitions/uint32
@@ -53,9 +53,9 @@ additionalProperties: false
 
 examples:
   - |
-    mt6359codec: mt6359codec {
-      mediatek,dmic-mode = <0>;
-      mediatek,mic-type-0 = <2>;
+    mt6359codec: audio-codec {
+        mediatek,dmic-mode = <0>;
+        mediatek,mic-type-0 = <2>;
     };
 
 ...
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/sound/rt5645.txt linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/sound/rt5645.txt
index 41a62fd2ae1ff..c1fa379f5f3ea 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/sound/rt5645.txt
+++ linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/sound/rt5645.txt
@@ -20,6 +20,11 @@ Optional properties:
   a GPIO spec for the external headphone detect pin. If jd-mode = 0,
   we will get the JD status by getting the value of hp-detect-gpios.
 
+- cbj-sleeve-gpios:
+  a GPIO spec to control the external combo jack circuit to tie the sleeve/ring2
+  contacts to the ground or floating. It could avoid some electric noise from the
+  active speaker jacks.
+
 - realtek,in2-differential
   Boolean. Indicate MIC2 input are differential, rather than single-ended.
 
@@ -68,6 +73,7 @@ codec: rt5650@1a {
 	compatible = "realtek,rt5650";
 	reg = <0x1a>;
 	hp-detect-gpios = <&gpio 19 0>;
+	cbj-sleeve-gpios = <&gpio 20 0>;
 	interrupt-parent = <&gpio>;
 	interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
 	realtek,dmic-en = "true";
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/spi/spi-nxp-fspi.yaml linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/spi/spi-nxp-fspi.yaml
index 7fd5911454800..902db92da8320 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/spi/spi-nxp-fspi.yaml
+++ linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/spi/spi-nxp-fspi.yaml
@@ -15,12 +15,19 @@ allOf:
 
 properties:
   compatible:
-    enum:
-      - nxp,imx8dxl-fspi
-      - nxp,imx8mm-fspi
-      - nxp,imx8mp-fspi
-      - nxp,imx8qxp-fspi
-      - nxp,lx2160a-fspi
+    oneOf:
+      - enum:
+          - nxp,imx8dxl-fspi
+          - nxp,imx8mm-fspi
+          - nxp,imx8mp-fspi
+          - nxp,imx8qxp-fspi
+          - nxp,imx8ulp-fspi
+          - nxp,lx2160a-fspi
+      - items:
+          - enum:
+              - nxp,imx93-fspi
+              - nxp,imx95-fspi
+          - const: nxp,imx8mm-fspi
 
   reg:
     items:
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/spmi/hisilicon,hisi-spmi-controller.yaml linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/spmi/hisilicon,hisi-spmi-controller.yaml
index f882903769f95..eee7c8d4cf4a2 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/spmi/hisilicon,hisi-spmi-controller.yaml
+++ linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/spmi/hisilicon,hisi-spmi-controller.yaml
@@ -14,7 +14,7 @@ description: |
   It is a MIPI System Power Management (SPMI) controller.
 
   The PMIC part is provided by
-  ./Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml.
+  Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml.
 
 allOf:
   - $ref: spmi.yaml#
@@ -48,7 +48,7 @@ patternProperties:
       PMIC properties, which are specific to the used SPMI PMIC device(s).
       When used in combination with HiSilicon 6421v600, the properties
       are documented at
-      drivers/staging/hikey9xx/hisilicon,hi6421-spmi-pmic.yaml.
+      Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml
 
 unevaluatedProperties: false
 
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/thermal/loongson,ls2k-thermal.yaml linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/thermal/loongson,ls2k-thermal.yaml
index 7538469997f9e..ca81c8afba79c 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/thermal/loongson,ls2k-thermal.yaml
+++ linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/thermal/loongson,ls2k-thermal.yaml
@@ -10,28 +10,55 @@ maintainers:
   - zhanghongchen <zhanghongchen@loongson.cn>
   - Yinbo Zhu <zhuyinbo@loongson.cn>
 
+allOf:
+  - $ref: /schemas/thermal/thermal-sensor.yaml#
+
 properties:
   compatible:
     oneOf:
       - enum:
           - loongson,ls2k1000-thermal
+          - loongson,ls2k2000-thermal
       - items:
           - enum:
-              - loongson,ls2k2000-thermal
+              - loongson,ls2k0500-thermal
           - const: loongson,ls2k1000-thermal
 
   reg:
-    maxItems: 1
+    minItems: 1
+    maxItems: 2
 
   interrupts:
     maxItems: 1
 
+  '#thermal-sensor-cells':
+    const: 1
+
 required:
   - compatible
   - reg
   - interrupts
+  - '#thermal-sensor-cells'
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - loongson,ls2k2000-thermal
+
+then:
+  properties:
+    reg:
+      minItems: 2
+      maxItems: 2
+
+else:
+  properties:
+    reg:
+      maxItems: 1
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
@@ -41,4 +68,5 @@ examples:
         reg = <0x1fe01500 0x30>;
         interrupt-parent = <&liointc0>;
         interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+        #thermal-sensor-cells = <1>;
     };
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/thermal/thermal-zones.yaml linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/thermal/thermal-zones.yaml
index 4f3acdc4dec0e..98cdd98212c49 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/thermal/thermal-zones.yaml
+++ linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/thermal/thermal-zones.yaml
@@ -49,7 +49,10 @@ properties:
       to take when the temperature crosses those thresholds.
 
 patternProperties:
-  "^[a-zA-Z][a-zA-Z0-9\\-]{1,12}-thermal$":
+  # Node name is limited in size due to Linux kernel requirements - 19
+  # characters in total (see THERMAL_NAME_LENGTH, including terminating NUL
+  # byte):
+  "^[a-zA-Z][a-zA-Z0-9\\-]{1,10}-thermal$":
     type: object
     description:
       Each thermal zone node contains information about how frequently it
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/timer/renesas,rz-mtu3.yaml linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/timer/renesas,rz-mtu3.yaml
index bffdab0b01859..fbac40b958dde 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/timer/renesas,rz-mtu3.yaml
+++ linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/timer/renesas,rz-mtu3.yaml
@@ -169,27 +169,27 @@ properties:
       - const: tgib0
       - const: tgic0
       - const: tgid0
-      - const: tgiv0
+      - const: tciv0
       - const: tgie0
       - const: tgif0
       - const: tgia1
       - const: tgib1
-      - const: tgiv1
-      - const: tgiu1
+      - const: tciv1
+      - const: tciu1
       - const: tgia2
       - const: tgib2
-      - const: tgiv2
-      - const: tgiu2
+      - const: tciv2
+      - const: tciu2
       - const: tgia3
       - const: tgib3
       - const: tgic3
       - const: tgid3
-      - const: tgiv3
+      - const: tciv3
       - const: tgia4
       - const: tgib4
       - const: tgic4
       - const: tgid4
-      - const: tgiv4
+      - const: tciv4
       - const: tgiu5
       - const: tgiv5
       - const: tgiw5
@@ -197,18 +197,18 @@ properties:
       - const: tgib6
       - const: tgic6
       - const: tgid6
-      - const: tgiv6
+      - const: tciv6
       - const: tgia7
       - const: tgib7
       - const: tgic7
       - const: tgid7
-      - const: tgiv7
+      - const: tciv7
       - const: tgia8
       - const: tgib8
       - const: tgic8
       - const: tgid8
-      - const: tgiv8
-      - const: tgiu8
+      - const: tciv8
+      - const: tciu8
 
   clocks:
     maxItems: 1
@@ -285,16 +285,16 @@ examples:
                    <GIC_SPI 211 IRQ_TYPE_EDGE_RISING>,
                    <GIC_SPI 212 IRQ_TYPE_EDGE_RISING>,
                    <GIC_SPI 213 IRQ_TYPE_EDGE_RISING>;
-      interrupt-names = "tgia0", "tgib0", "tgic0", "tgid0", "tgiv0", "tgie0",
+      interrupt-names = "tgia0", "tgib0", "tgic0", "tgid0", "tciv0", "tgie0",
                         "tgif0",
-                        "tgia1", "tgib1", "tgiv1", "tgiu1",
-                        "tgia2", "tgib2", "tgiv2", "tgiu2",
-                        "tgia3", "tgib3", "tgic3", "tgid3", "tgiv3",
-                        "tgia4", "tgib4", "tgic4", "tgid4", "tgiv4",
+                        "tgia1", "tgib1", "tciv1", "tciu1",
+                        "tgia2", "tgib2", "tciv2", "tciu2",
+                        "tgia3", "tgib3", "tgic3", "tgid3", "tciv3",
+                        "tgia4", "tgib4", "tgic4", "tgid4", "tciv4",
                         "tgiu5", "tgiv5", "tgiw5",
-                        "tgia6", "tgib6", "tgic6", "tgid6", "tgiv6",
-                        "tgia7", "tgib7", "tgic7", "tgid7", "tgiv7",
-                        "tgia8", "tgib8", "tgic8", "tgid8", "tgiv8", "tgiu8";
+                        "tgia6", "tgib6", "tgic6", "tgid6", "tciv6",
+                        "tgia7", "tgib7", "tgic7", "tgid7", "tciv7",
+                        "tgia8", "tgib8", "tgic8", "tgid8", "tciv8", "tciu8";
       clocks = <&cpg CPG_MOD R9A07G044_MTU_X_MCK_MTU3>;
       power-domains = <&cpg>;
       resets = <&cpg R9A07G044_MTU_X_PRESET_MTU3>;
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/usb/cypress,hx3.yaml linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/usb/cypress,hx3.yaml
index 47add0d85fb89..02349bbb0d46f 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/usb/cypress,hx3.yaml
+++ linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/usb/cypress,hx3.yaml
@@ -14,9 +14,22 @@ allOf:
 
 properties:
   compatible:
-    enum:
-      - usb4b4,6504
-      - usb4b4,6506
+    oneOf:
+      - enum:
+          - usb4b4,6504
+          - usb4b4,6506
+      - items:
+          - enum:
+              - usb4b4,6500
+              - usb4b4,6508
+          - const: usb4b4,6504
+      - items:
+          - enum:
+              - usb4b4,6502
+              - usb4b4,6503
+              - usb4b4,6507
+              - usb4b4,650a
+          - const: usb4b4,6506
 
   reg: true
 
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml
index 9ea1e4cd0709c..69be6affa9b53 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml
+++ linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml
@@ -85,13 +85,21 @@ required:
   - reg
   - "#address-cells"
   - "#size-cells"
-  - dma-ranges
   - ranges
   - clocks
   - clock-names
   - interrupts
   - power-domains
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          const: fsl,imx8mp-dwc3
+    then:
+      required:
+        - dma-ranges
+
 additionalProperties: false
 
 examples:
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/usb/microchip,usb5744.yaml linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/usb/microchip,usb5744.yaml
index ff3a1707ef570..6d4cfd943f584 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/usb/microchip,usb5744.yaml
+++ linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/usb/microchip,usb5744.yaml
@@ -36,7 +36,11 @@ properties:
 
   vdd-supply:
     description:
-      VDD power supply to the hub
+      3V3 power supply to the hub
+
+  vdd2-supply:
+    description:
+      1V2 power supply to the hub
 
   peer-hub:
     $ref: /schemas/types.yaml#/definitions/phandle
@@ -62,6 +66,7 @@ allOf:
       properties:
         reset-gpios: false
         vdd-supply: false
+        vdd2-supply: false
         peer-hub: false
         i2c-bus: false
     else:
diff --git linux-libre-6.6-gnu/Documentation/devicetree/bindings/vendor-prefixes.yaml linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/vendor-prefixes.yaml
index 573578db95091..7376a924e9aca 100644
--- linux-libre-6.6-gnu/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ linux-libre-6.6.147-gnu/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -524,6 +524,8 @@ patternProperties:
     description: GlobalTop Technology, Inc.
   "^gmt,.*":
     description: Global Mixed-mode Technology, Inc.
+  "^gocontroll,.*":
+    description: GOcontroll Modular Embedded Electronics B.V.
   "^goldelico,.*":
     description: Golden Delicious Computers GmbH & Co. KG
   "^goodix,.*":
@@ -771,6 +773,8 @@ patternProperties:
     description: Linux-specific binding
   "^linx,.*":
     description: Linx Technologies
+  "^liontron,.*":
+    description: Shenzhen Liontron Technology Co., Ltd
   "^liteon,.*":
     description: LITE-ON Technology Corp.
   "^litex,.*":
@@ -923,6 +927,8 @@ patternProperties:
     description: National Semiconductor
   "^nec,.*":
     description: NEC LCD Technologies, Ltd.
+  "^neofidelity,.*":
+    description: Neofidelity Inc.
   "^neonode,.*":
     description: Neonode Inc.
   "^netgear,.*":
diff --git linux-libre-6.6-gnu/Documentation/driver-api/fpga/fpga-bridge.rst linux-libre-6.6.147-gnu/Documentation/driver-api/fpga/fpga-bridge.rst
index 6042085340953..833f68fb07008 100644
--- linux-libre-6.6-gnu/Documentation/driver-api/fpga/fpga-bridge.rst
+++ linux-libre-6.6.147-gnu/Documentation/driver-api/fpga/fpga-bridge.rst
@@ -6,9 +6,12 @@ API to implement a new FPGA bridge
 
 * struct fpga_bridge - The FPGA Bridge structure
 * struct fpga_bridge_ops - Low level Bridge driver ops
-* fpga_bridge_register() - Create and register a bridge
+* __fpga_bridge_register() - Create and register a bridge
 * fpga_bridge_unregister() - Unregister a bridge
 
+The helper macro ``fpga_bridge_register()`` automatically sets
+the module that registers the FPGA bridge as the owner.
+
 .. kernel-doc:: include/linux/fpga/fpga-bridge.h
    :functions: fpga_bridge
 
@@ -16,7 +19,7 @@ API to implement a new FPGA bridge
    :functions: fpga_bridge_ops
 
 .. kernel-doc:: drivers/fpga/fpga-bridge.c
-   :functions: fpga_bridge_register
+   :functions: __fpga_bridge_register
 
 .. kernel-doc:: drivers/fpga/fpga-bridge.c
    :functions: fpga_bridge_unregister
diff --git linux-libre-6.6-gnu/Documentation/driver-api/fpga/fpga-mgr.rst linux-libre-6.6.147-gnu/Documentation/driver-api/fpga/fpga-mgr.rst
index 49c0a95126532..8d2b79f696c1f 100644
--- linux-libre-6.6-gnu/Documentation/driver-api/fpga/fpga-mgr.rst
+++ linux-libre-6.6.147-gnu/Documentation/driver-api/fpga/fpga-mgr.rst
@@ -24,7 +24,8 @@ How to support a new FPGA device
 --------------------------------
 
 To add another FPGA manager, write a driver that implements a set of ops.  The
-probe function calls fpga_mgr_register() or fpga_mgr_register_full(), such as::
+probe function calls ``fpga_mgr_register()`` or ``fpga_mgr_register_full()``,
+such as::
 
 	static const struct fpga_manager_ops socfpga_fpga_ops = {
 		.write_init = socfpga_fpga_ops_configure_init,
@@ -69,10 +70,11 @@ probe function calls fpga_mgr_register() or fpga_mgr_register_full(), such as::
 	}
 
 Alternatively, the probe function could call one of the resource managed
-register functions, devm_fpga_mgr_register() or devm_fpga_mgr_register_full().
-When these functions are used, the parameter syntax is the same, but the call
-to fpga_mgr_unregister() should be removed. In the above example, the
-socfpga_fpga_remove() function would not be required.
+register functions, ``devm_fpga_mgr_register()`` or
+``devm_fpga_mgr_register_full()``.  When these functions are used, the
+parameter syntax is the same, but the call to ``fpga_mgr_unregister()`` should be
+removed. In the above example, the ``socfpga_fpga_remove()`` function would not be
+required.
 
 The ops will implement whatever device specific register writes are needed to
 do the programming sequence for this particular FPGA.  These ops return 0 for
@@ -125,15 +127,19 @@ API for implementing a new FPGA Manager driver
 * struct fpga_manager -  the FPGA manager struct
 * struct fpga_manager_ops -  Low level FPGA manager driver ops
 * struct fpga_manager_info -  Parameter structure for fpga_mgr_register_full()
-* fpga_mgr_register_full() -  Create and register an FPGA manager using the
+* __fpga_mgr_register_full() -  Create and register an FPGA manager using the
   fpga_mgr_info structure to provide the full flexibility of options
-* fpga_mgr_register() -  Create and register an FPGA manager using standard
+* __fpga_mgr_register() -  Create and register an FPGA manager using standard
   arguments
-* devm_fpga_mgr_register_full() -  Resource managed version of
-  fpga_mgr_register_full()
-* devm_fpga_mgr_register() -  Resource managed version of fpga_mgr_register()
+* __devm_fpga_mgr_register_full() -  Resource managed version of
+  __fpga_mgr_register_full()
+* __devm_fpga_mgr_register() -  Resource managed version of __fpga_mgr_register()
 * fpga_mgr_unregister() -  Unregister an FPGA manager
 
+Helper macros ``fpga_mgr_register_full()``, ``fpga_mgr_register()``,
+``devm_fpga_mgr_register_full()``, and ``devm_fpga_mgr_register()`` are available
+to ease the registration.
+
 .. kernel-doc:: include/linux/fpga/fpga-mgr.h
    :functions: fpga_mgr_states
 
@@ -147,16 +153,16 @@ API for implementing a new FPGA Manager driver
    :functions: fpga_manager_info
 
 .. kernel-doc:: drivers/fpga/fpga-mgr.c
-   :functions: fpga_mgr_register_full
+   :functions: __fpga_mgr_register_full
 
 .. kernel-doc:: drivers/fpga/fpga-mgr.c
-   :functions: fpga_mgr_register
+   :functions: __fpga_mgr_register
 
 .. kernel-doc:: drivers/fpga/fpga-mgr.c
-   :functions: devm_fpga_mgr_register_full
+   :functions: __devm_fpga_mgr_register_full
 
 .. kernel-doc:: drivers/fpga/fpga-mgr.c
-   :functions: devm_fpga_mgr_register
+   :functions: __devm_fpga_mgr_register
 
 .. kernel-doc:: drivers/fpga/fpga-mgr.c
    :functions: fpga_mgr_unregister
diff --git linux-libre-6.6-gnu/Documentation/driver-api/fpga/fpga-region.rst linux-libre-6.6.147-gnu/Documentation/driver-api/fpga/fpga-region.rst
index dc55d60a0b4a5..2d03b5fb76575 100644
--- linux-libre-6.6-gnu/Documentation/driver-api/fpga/fpga-region.rst
+++ linux-libre-6.6.147-gnu/Documentation/driver-api/fpga/fpga-region.rst
@@ -46,13 +46,16 @@ API to add a new FPGA region
 ----------------------------
 
 * struct fpga_region - The FPGA region struct
-* struct fpga_region_info - Parameter structure for fpga_region_register_full()
-* fpga_region_register_full() -  Create and register an FPGA region using the
+* struct fpga_region_info - Parameter structure for __fpga_region_register_full()
+* __fpga_region_register_full() -  Create and register an FPGA region using the
   fpga_region_info structure to provide the full flexibility of options
-* fpga_region_register() -  Create and register an FPGA region using standard
+* __fpga_region_register() -  Create and register an FPGA region using standard
   arguments
 * fpga_region_unregister() -  Unregister an FPGA region
 
+Helper macros ``fpga_region_register()`` and ``fpga_region_register_full()``
+automatically set the module that registers the FPGA region as the owner.
+
 The FPGA region's probe function will need to get a reference to the FPGA
 Manager it will be using to do the programming.  This usually would happen
 during the region's probe function.
@@ -82,10 +85,10 @@ following APIs to handle building or tearing down that list.
    :functions: fpga_region_info
 
 .. kernel-doc:: drivers/fpga/fpga-region.c
-   :functions: fpga_region_register_full
+   :functions: __fpga_region_register_full
 
 .. kernel-doc:: drivers/fpga/fpga-region.c
-   :functions: fpga_region_register
+   :functions: __fpga_region_register
 
 .. kernel-doc:: drivers/fpga/fpga-region.c
    :functions: fpga_region_unregister
diff --git linux-libre-6.6-gnu/Documentation/driver-api/ipmi.rst linux-libre-6.6.147-gnu/Documentation/driver-api/ipmi.rst
index e224e47b6b094..dfa021eacd63c 100644
--- linux-libre-6.6-gnu/Documentation/driver-api/ipmi.rst
+++ linux-libre-6.6.147-gnu/Documentation/driver-api/ipmi.rst
@@ -540,7 +540,7 @@ at module load time (for a module) with::
 	alerts_broken
 
 The addresses are normal I2C addresses.  The adapter is the string
-name of the adapter, as shown in /sys/class/i2c-adapter/i2c-<n>/name.
+name of the adapter, as shown in /sys/bus/i2c/devices/i2c-<n>/name.
 It is *NOT* i2c-<n> itself.  Also, the comparison is done ignoring
 spaces, so if the name is "This is an I2C chip" you can say
 adapter_name=ThisisanI2cchip.  This is because it's hard to pass in
diff --git linux-libre-6.6-gnu/Documentation/driver-api/nvdimm/btt.rst linux-libre-6.6.147-gnu/Documentation/driver-api/nvdimm/btt.rst
index 107395c042ae0..cb1afe9dc3cbb 100644
--- linux-libre-6.6-gnu/Documentation/driver-api/nvdimm/btt.rst
+++ linux-libre-6.6.147-gnu/Documentation/driver-api/nvdimm/btt.rst
@@ -161,9 +161,8 @@ process::
 	nlanes = min(nfree, num_cpus)
 
 A lane number is obtained at the start of any IO, and is used for indexing into
-all the on-disk and in-memory data structures for the duration of the IO. If
-there are more CPUs than the max number of available lanes, than lanes are
-protected by spinlocks.
+all the on-disk and in-memory data structures for the duration of the IO. Lanes
+are protected by mutexes.
 
 
 d. In-memory data structure: Read Tracking Table (RTT)
diff --git linux-libre-6.6-gnu/Documentation/driver-api/pci/p2pdma.rst linux-libre-6.6.147-gnu/Documentation/driver-api/pci/p2pdma.rst
index 44deb52beeb47..d0b241628cf13 100644
--- linux-libre-6.6-gnu/Documentation/driver-api/pci/p2pdma.rst
+++ linux-libre-6.6.147-gnu/Documentation/driver-api/pci/p2pdma.rst
@@ -83,19 +83,9 @@ this to include other types of resources like doorbells.
 Client Drivers
 --------------
 
-A client driver typically only has to conditionally change its DMA map
-routine to use the mapping function :c:func:`pci_p2pdma_map_sg()` instead
-of the usual :c:func:`dma_map_sg()` function. Memory mapped in this
-way does not need to be unmapped.
-
-The client may also, optionally, make use of
-:c:func:`is_pci_p2pdma_page()` to determine when to use the P2P mapping
-functions and when to use the regular mapping functions. In some
-situations, it may be more appropriate to use a flag to indicate a
-given request is P2P memory and map appropriately. It is important to
-ensure that struct pages that back P2P memory stay out of code that
-does not have support for them as other code may treat the pages as
-regular memory which may not be appropriate.
+A client driver only has to use the mapping API :c:func:`dma_map_sg()`
+and :c:func:`dma_unmap_sg()` functions as usual, and the implementation
+will do the right thing for the P2P capable memory.
 
 
 Orchestrator Drivers
diff --git linux-libre-6.6-gnu/Documentation/driver-api/pci/pci.rst linux-libre-6.6.147-gnu/Documentation/driver-api/pci/pci.rst
index 4843cfad4f60b..a0f2903dce4ea 100644
--- linux-libre-6.6-gnu/Documentation/driver-api/pci/pci.rst
+++ linux-libre-6.6.147-gnu/Documentation/driver-api/pci/pci.rst
@@ -31,6 +31,9 @@ PCI Support Library
 .. kernel-doc:: drivers/pci/slot.c
    :export:
 
+.. kernel-doc:: drivers/pci/rebar.c
+   :export:
+
 .. kernel-doc:: drivers/pci/rom.c
    :export:
 
diff --git linux-libre-6.6-gnu/Documentation/driver-api/pwm.rst linux-libre-6.6.147-gnu/Documentation/driver-api/pwm.rst
index 3fdc95f7a1d15..ed5ec98165381 100644
--- linux-libre-6.6-gnu/Documentation/driver-api/pwm.rst
+++ linux-libre-6.6.147-gnu/Documentation/driver-api/pwm.rst
@@ -41,7 +41,7 @@ the getter, devm_pwm_get() and devm_fwnode_pwm_get(), also exist.
 
 After being requested, a PWM has to be configured using::
 
-	int pwm_apply_state(struct pwm_device *pwm, struct pwm_state *state);
+	int pwm_apply_might_sleep(struct pwm_device *pwm, struct pwm_state *state);
 
 This API controls both the PWM period/duty_cycle config and the
 enable/disable state.
@@ -57,13 +57,13 @@ If supported by the driver, the signal can be optimized, for example to improve
 EMI by phase shifting the individual channels of a chip.
 
 The pwm_config(), pwm_enable() and pwm_disable() functions are just wrappers
-around pwm_apply_state() and should not be used if the user wants to change
+around pwm_apply_might_sleep() and should not be used if the user wants to change
 several parameter at once. For example, if you see pwm_config() and
 pwm_{enable,disable}() calls in the same function, this probably means you
-should switch to pwm_apply_state().
+should switch to pwm_apply_might_sleep().
 
 The PWM user API also allows one to query the PWM state that was passed to the
-last invocation of pwm_apply_state() using pwm_get_state(). Note this is
+last invocation of pwm_apply_might_sleep() using pwm_get_state(). Note this is
 different to what the driver has actually implemented if the request cannot be
 satisfied exactly with the hardware in use. There is currently no way for
 consumers to get the actually implemented settings.
diff --git linux-libre-6.6-gnu/Documentation/driver-api/serial/driver.rst linux-libre-6.6.147-gnu/Documentation/driver-api/serial/driver.rst
index 84b43061c11be..60434f2b02863 100644
--- linux-libre-6.6-gnu/Documentation/driver-api/serial/driver.rst
+++ linux-libre-6.6.147-gnu/Documentation/driver-api/serial/driver.rst
@@ -103,4 +103,4 @@ Some helpers are provided in order to set/get modem control lines via GPIO.
 .. kernel-doc:: drivers/tty/serial/serial_mctrl_gpio.c
    :identifiers: mctrl_gpio_init mctrl_gpio_free mctrl_gpio_to_gpiod
            mctrl_gpio_set mctrl_gpio_get mctrl_gpio_enable_ms
-           mctrl_gpio_disable_ms
+           mctrl_gpio_disable_ms_sync mctrl_gpio_disable_ms_no_sync
diff --git linux-libre-6.6-gnu/Documentation/driver-api/tty/tty_port.rst linux-libre-6.6.147-gnu/Documentation/driver-api/tty/tty_port.rst
index 5cb90e954fcf7..504a353f26825 100644
--- linux-libre-6.6-gnu/Documentation/driver-api/tty/tty_port.rst
+++ linux-libre-6.6.147-gnu/Documentation/driver-api/tty/tty_port.rst
@@ -42,9 +42,10 @@ TTY Refcounting
 TTY Helpers
 -----------
 
+.. kernel-doc::  include/linux/tty_port.h
+   :identifiers: tty_port_tty_hangup tty_port_tty_vhangup
 .. kernel-doc::  drivers/tty/tty_port.c
-   :identifiers: tty_port_tty_hangup tty_port_tty_wakeup
-
+   :identifiers: tty_port_tty_wakeup
 
 Modem Signals
 -------------
diff --git linux-libre-6.6-gnu/Documentation/filesystems/directory-locking.rst linux-libre-6.6.147-gnu/Documentation/filesystems/directory-locking.rst
index dccd61c7c5c3b..193c22687851a 100644
--- linux-libre-6.6-gnu/Documentation/filesystems/directory-locking.rst
+++ linux-libre-6.6.147-gnu/Documentation/filesystems/directory-locking.rst
@@ -22,13 +22,16 @@ exclusive.
 3) object removal.  Locking rules: caller locks parent, finds victim,
 locks victim and calls the method.  Locks are exclusive.
 
-4) rename() that is _not_ cross-directory.  Locking rules: caller locks the
-parent and finds source and target.  We lock both (provided they exist).  If we
-need to lock two inodes of different type (dir vs non-dir), we lock directory
-first.  If we need to lock two inodes of the same type, lock them in inode
-pointer order.  Then call the method.  All locks are exclusive.
-NB: we might get away with locking the source (and target in exchange
-case) shared.
+4) rename() that is _not_ cross-directory.  Locking rules: caller locks
+the parent and finds source and target.  Then we decide which of the
+source and target need to be locked.  Source needs to be locked if it's a
+non-directory; target - if it's a non-directory or about to be removed.
+Take the locks that need to be taken, in inode pointer order if need
+to take both (that can happen only when both source and target are
+non-directories - the source because it wouldn't be locked otherwise
+and the target because mixing directory and non-directory is allowed
+only with RENAME_EXCHANGE, and that won't be removing the target).
+After the locks had been taken, call the method.  All locks are exclusive.
 
 5) link creation.  Locking rules:
 
@@ -44,20 +47,17 @@ rules:
 
 	* lock the filesystem
 	* lock parents in "ancestors first" order. If one is not ancestor of
-	  the other, lock them in inode pointer order.
+	  the other, lock the parent of source first.
 	* find source and target.
 	* if old parent is equal to or is a descendent of target
 	  fail with -ENOTEMPTY
 	* if new parent is equal to or is a descendent of source
 	  fail with -ELOOP
-	* Lock both the source and the target provided they exist. If we
-	  need to lock two inodes of different type (dir vs non-dir), we lock
-	  the directory first. If we need to lock two inodes of the same type,
-	  lock them in inode pointer order.
+	* Lock subdirectories involved (source before target).
+	* Lock non-directories involved, in inode pointer order.
 	* call the method.
 
-All ->i_rwsem are taken exclusive.  Again, we might get away with locking
-the source (and target in exchange case) shared.
+All ->i_rwsem are taken exclusive.
 
 The rules above obviously guarantee that all directories that are going to be
 read, modified or removed by method will be locked by caller.
@@ -67,6 +67,7 @@ If no directory is its own ancestor, the scheme above is deadlock-free.
 
 Proof:
 
+[XXX: will be updated once we are done massaging the lock_rename()]
 	First of all, at any moment we have a linear ordering of the
 	objects - A < B iff (A is an ancestor of B) or (B is not an ancestor
         of A and ptr(A) < ptr(B)).
diff --git linux-libre-6.6-gnu/Documentation/filesystems/f2fs.rst linux-libre-6.6.147-gnu/Documentation/filesystems/f2fs.rst
index d32c6209685d6..961684e9466e6 100644
--- linux-libre-6.6-gnu/Documentation/filesystems/f2fs.rst
+++ linux-libre-6.6.147-gnu/Documentation/filesystems/f2fs.rst
@@ -126,9 +126,7 @@ norecovery		 Disable the roll-forward recovery routine, mounted read-
 discard/nodiscard	 Enable/disable real-time discard in f2fs, if discard is
 			 enabled, f2fs will issue discard/TRIM commands when a
 			 segment is cleaned.
-no_heap			 Disable heap-style segment allocation which finds free
-			 segments for data from the beginning of main area, while
-			 for node from the end of main area.
+heap/no_heap		 Deprecated.
 nouser_xattr		 Disable Extended User Attributes. Note: xattr is enabled
 			 by default if CONFIG_F2FS_FS_XATTR is selected.
 noacl			 Disable POSIX Access Control List. Note: acl is enabled
@@ -228,8 +226,6 @@ mode=%s			 Control block allocation mode which supports "adaptive"
 			 option for more randomness.
 			 Please, use these options for your experiments and we strongly
 			 recommend to re-format the filesystem after using these options.
-io_bits=%u		 Set the bit size of write IO requests. It should be set
-			 with "mode=lfs".
 usrquota		 Enable plain user disk quota accounting.
 grpquota		 Enable plain group disk quota accounting.
 prjquota		 Enable plain project quota accounting.
@@ -237,9 +233,9 @@ usrjquota=<file>	 Appoint specified file and type during mount, so that quota
 grpjquota=<file>	 information can be properly updated during recovery flow,
 prjjquota=<file>	 <quota file>: must be in root directory;
 jqfmt=<quota type>	 <quota type>: [vfsold,vfsv0,vfsv1].
-offusrjquota		 Turn off user journalled quota.
-offgrpjquota		 Turn off group journalled quota.
-offprjjquota		 Turn off project journalled quota.
+usrjquota=		 Turn off user journalled quota.
+grpjquota=		 Turn off group journalled quota.
+prjjquota=		 Turn off project journalled quota.
 quota			 Enable plain user disk quota accounting.
 noquota			 Disable all plain disk quota option.
 alloc_mode=%s		 Adjust block allocation policy, which supports "reuse"
diff --git linux-libre-6.6-gnu/Documentation/filesystems/fscrypt.rst linux-libre-6.6.147-gnu/Documentation/filesystems/fscrypt.rst
index a624e92f2687f..6ba11dfb4bf36 100644
--- linux-libre-6.6-gnu/Documentation/filesystems/fscrypt.rst
+++ linux-libre-6.6.147-gnu/Documentation/filesystems/fscrypt.rst
@@ -141,9 +141,8 @@ However, these ioctls have some limitations:
   CONFIG_PAGE_POISONING=y in your kernel config and add page_poison=1
   to your kernel command line.  However, this has a performance cost.
 
-- Secret keys might still exist in CPU registers, in crypto
-  accelerator hardware (if used by the crypto API to implement any of
-  the algorithms), or in other places not explicitly considered here.
+- Secret keys might still exist in CPU registers or in other places
+  not explicitly considered here.
 
 Limitations of v1 policies
 ~~~~~~~~~~~~~~~~~~~~~~~~~~
@@ -375,9 +374,12 @@ the work is done by XChaCha12, which is much faster than AES when AES
 acceleration is unavailable.  For more information about Adiantum, see
 `the Adiantum paper <https://eprint.iacr.org/2018/720.pdf>`_.
 
-The (AES-128-CBC-ESSIV, AES-128-CTS-CBC) pair exists only to support
-systems whose only form of AES acceleration is an off-CPU crypto
-accelerator such as CAAM or CESA that does not support XTS.
+The (AES-128-CBC-ESSIV, AES-128-CTS-CBC) pair was added to try to
+provide a more efficient option for systems that lack AES instructions
+in the CPU but do have a non-inline crypto engine such as CAAM or CESA
+that supports AES-CBC (and not AES-XTS).  This is deprecated.  It has
+been shown that just doing AES on the CPU is actually faster.
+Moreover, Adiantum is faster still and is recommended on such systems.
 
 The remaining mode pairs are the "national pride ciphers":
 
@@ -1231,22 +1233,13 @@ this by validating all top-level encryption policies prior to access.
 Inline encryption support
 =========================
 
-By default, fscrypt uses the kernel crypto API for all cryptographic
-operations (other than HKDF, which fscrypt partially implements
-itself).  The kernel crypto API supports hardware crypto accelerators,
-but only ones that work in the traditional way where all inputs and
-outputs (e.g. plaintexts and ciphertexts) are in memory.  fscrypt can
-take advantage of such hardware, but the traditional acceleration
-model isn't particularly efficient and fscrypt hasn't been optimized
-for it.
-
-Instead, many newer systems (especially mobile SoCs) have *inline
-encryption hardware* that can encrypt/decrypt data while it is on its
-way to/from the storage device.  Linux supports inline encryption
-through a set of extensions to the block layer called *blk-crypto*.
-blk-crypto allows filesystems to attach encryption contexts to bios
-(I/O requests) to specify how the data will be encrypted or decrypted
-in-line.  For more information about blk-crypto, see
+Many newer systems (especially mobile SoCs) have *inline encryption
+hardware* that can encrypt/decrypt data while it is on its way to/from
+the storage device.  Linux supports inline encryption through a set of
+extensions to the block layer called *blk-crypto*.  blk-crypto allows
+filesystems to attach encryption contexts to bios (I/O requests) to
+specify how the data will be encrypted or decrypted in-line.  For more
+information about blk-crypto, see
 :ref:`Documentation/block/inline-encryption.rst <inline_encryption>`.
 
 On supported filesystems (currently ext4 and f2fs), fscrypt can use
diff --git linux-libre-6.6-gnu/Documentation/filesystems/locking.rst linux-libre-6.6.147-gnu/Documentation/filesystems/locking.rst
index 7be2900806c85..bd12f2f850ad3 100644
--- linux-libre-6.6-gnu/Documentation/filesystems/locking.rst
+++ linux-libre-6.6.147-gnu/Documentation/filesystems/locking.rst
@@ -101,7 +101,7 @@ symlink:	exclusive
 mkdir:		exclusive
 unlink:		exclusive (both)
 rmdir:		exclusive (both)(see below)
-rename:		exclusive (all)	(see below)
+rename:		exclusive (both parents, some children)	(see below)
 readlink:	no
 get_link:	no
 setattr:	exclusive
@@ -123,6 +123,9 @@ get_offset_ctx  no
 	Additionally, ->rmdir(), ->unlink() and ->rename() have ->i_rwsem
 	exclusive on victim.
 	cross-directory ->rename() has (per-superblock) ->s_vfs_rename_sem.
+	->unlink() and ->rename() have ->i_rwsem exclusive on all non-directories
+	involved.
+	->rename() has ->i_rwsem exclusive on any subdirectory that changes parent.
 
 See Documentation/filesystems/directory-locking.rst for more detailed discussion
 of the locking scheme for directory operations.
diff --git linux-libre-6.6-gnu/Documentation/filesystems/mount_api.rst linux-libre-6.6.147-gnu/Documentation/filesystems/mount_api.rst
index 9aaf6ef75eb53..0c69aa574ab9a 100644
--- linux-libre-6.6-gnu/Documentation/filesystems/mount_api.rst
+++ linux-libre-6.6.147-gnu/Documentation/filesystems/mount_api.rst
@@ -766,7 +766,8 @@ process the parameters it is given.
 
    * ::
 
-       bool fs_validate_description(const struct fs_parameter_description *desc);
+       bool fs_validate_description(const char *name,
+                                    const struct fs_parameter_description *desc);
 
      This performs some validation checks on a parameter description.  It
      returns true if the description is good and false if it is not.  It will
diff --git linux-libre-6.6-gnu/Documentation/filesystems/overlayfs.rst linux-libre-6.6.147-gnu/Documentation/filesystems/overlayfs.rst
index 5b93268e400f4..56a5ad7a4fbd2 100644
--- linux-libre-6.6-gnu/Documentation/filesystems/overlayfs.rst
+++ linux-libre-6.6.147-gnu/Documentation/filesystems/overlayfs.rst
@@ -344,10 +344,11 @@ escaping the colons with a single backslash.  For example:
 
   mount -t overlay overlay -olowerdir=/a\:lower\:\:dir /merged
 
-Since kernel version v6.5, directory names containing colons can also
-be provided as lower layer using the fsconfig syscall from new mount api:
+Since kernel version v6.8, directory names containing colons can also
+be configured as lower layer using the "lowerdir+" mount options and the
+fsconfig syscall from new mount api.  For example:
 
-  fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", "/a:lower::dir", 0);
+  fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir+", "/a:lower::dir", 0);
 
 In the latter case, colons in lower layer directory names will be escaped
 as an octal characters (\072) when displayed in /proc/self/mountinfo.
@@ -416,6 +417,16 @@ Only the data of the files in the "data-only" lower layers may be visible
 when a "metacopy" file in one of the lower layers above it, has a "redirect"
 to the absolute path of the "lower data" file in the "data-only" lower layer.
 
+Since kernel version v6.8, "data-only" lower layers can also be added using
+the "datadir+" mount options and the fsconfig syscall from new mount api.
+For example:
+
+  fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir+", "/l1", 0);
+  fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir+", "/l2", 0);
+  fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir+", "/l3", 0);
+  fsconfig(fs_fd, FSCONFIG_SET_STRING, "datadir+", "/do1", 0);
+  fsconfig(fs_fd, FSCONFIG_SET_STRING, "datadir+", "/do2", 0);
+
 
 fs-verity support
 ----------------------
diff --git linux-libre-6.6-gnu/Documentation/filesystems/porting.rst linux-libre-6.6.147-gnu/Documentation/filesystems/porting.rst
index 4d05b9862451e..41d964b48e657 100644
--- linux-libre-6.6-gnu/Documentation/filesystems/porting.rst
+++ linux-libre-6.6.147-gnu/Documentation/filesystems/porting.rst
@@ -1045,3 +1045,21 @@ filesystem type is now moved to a later point when the devices are closed:
 As this is a VFS level change it has no practical consequences for filesystems
 other than that all of them must use one of the provided kill_litter_super(),
 kill_anon_super(), or kill_block_super() helpers.
+
+---
+
+**mandatory**
+
+If ->rename() update of .. on cross-directory move needs an exclusion with
+directory modifications, do *not* lock the subdirectory in question in your
+->rename() - it's done by the caller now [that item should've been added in
+28eceeda130f "fs: Lock moved directories"].
+
+---
+
+**mandatory**
+
+On same-directory ->rename() the (tautological) update of .. is not protected
+by any locks; just don't do it if the old parent is the same as the new one.
+We really can't lock two subdirectories in same-directory rename - not without
+deadlocks.
diff --git linux-libre-6.6-gnu/Documentation/filesystems/proc.rst linux-libre-6.6.147-gnu/Documentation/filesystems/proc.rst
index 2b59cff8be179..0a186efa0cec5 100644
--- linux-libre-6.6-gnu/Documentation/filesystems/proc.rst
+++ linux-libre-6.6.147-gnu/Documentation/filesystems/proc.rst
@@ -23,13 +23,13 @@ fixes/update part 1.1  Stefani Seibold <stefani@seibold.net>    June 9 2009
   1	Collecting System Information
   1.1	Process-Specific Subdirectories
   1.2	Kernel data
-  1.3	IDE devices in /proc/ide
-  1.4	Networking info in /proc/net
-  1.5	SCSI info
-  1.6	Parallel port info in /proc/parport
-  1.7	TTY info in /proc/tty
-  1.8	Miscellaneous kernel statistics in /proc/stat
-  1.9	Ext4 file system parameters
+  1.3	Networking info in /proc/net
+  1.4	SCSI info
+  1.5	Parallel port info in /proc/parport
+  1.6	TTY info in /proc/tty
+  1.7	Miscellaneous kernel statistics in /proc/stat
+  1.8	Ext4 file system parameters
+  1.9	/proc/consoles - Shows registered system consoles
 
   2	Modifying System Parameters
 
diff --git linux-libre-6.6-gnu/Documentation/firmware-guide/acpi/i2c-muxes.rst linux-libre-6.6.147-gnu/Documentation/firmware-guide/acpi/i2c-muxes.rst
index 3a8997ccd7c4b..f366539acd792 100644
--- linux-libre-6.6-gnu/Documentation/firmware-guide/acpi/i2c-muxes.rst
+++ linux-libre-6.6.147-gnu/Documentation/firmware-guide/acpi/i2c-muxes.rst
@@ -14,7 +14,7 @@ Consider this topology::
     |      |   | 0x70 |--CH01--> i2c client B (0x50)
     +------+   +------+
 
-which corresponds to the following ASL::
+which corresponds to the following ASL (in the scope of \_SB)::
 
     Device (SMB1)
     {
@@ -24,7 +24,7 @@ which corresponds to the following ASL::
             Name (_HID, ...)
             Name (_CRS, ResourceTemplate () {
                 I2cSerialBus (0x70, ControllerInitiated, I2C_SPEED,
-                            AddressingMode7Bit, "^SMB1", 0x00,
+                            AddressingMode7Bit, "\\_SB.SMB1", 0x00,
                             ResourceConsumer,,)
             }
 
@@ -37,7 +37,7 @@ which corresponds to the following ASL::
                     Name (_HID, ...)
                     Name (_CRS, ResourceTemplate () {
                         I2cSerialBus (0x50, ControllerInitiated, I2C_SPEED,
-                                    AddressingMode7Bit, "^CH00", 0x00,
+                                    AddressingMode7Bit, "\\_SB.SMB1.CH00", 0x00,
                                     ResourceConsumer,,)
                     }
                 }
@@ -52,7 +52,7 @@ which corresponds to the following ASL::
                     Name (_HID, ...)
                     Name (_CRS, ResourceTemplate () {
                         I2cSerialBus (0x50, ControllerInitiated, I2C_SPEED,
-                                    AddressingMode7Bit, "^CH01", 0x00,
+                                    AddressingMode7Bit, "\\_SB.SMB1.CH01", 0x00,
                                     ResourceConsumer,,)
                     }
                 }
diff --git linux-libre-6.6-gnu/Documentation/gpu/drm-kms.rst linux-libre-6.6.147-gnu/Documentation/gpu/drm-kms.rst
index a0c83fc481264..690d2ffe720ef 100644
--- linux-libre-6.6-gnu/Documentation/gpu/drm-kms.rst
+++ linux-libre-6.6.147-gnu/Documentation/gpu/drm-kms.rst
@@ -546,6 +546,8 @@ Plane Composition Properties
 .. kernel-doc:: drivers/gpu/drm/drm_blend.c
    :doc: overview
 
+.. _damage_tracking_properties:
+
 Damage Tracking Properties
 --------------------------
 
diff --git linux-libre-6.6-gnu/Documentation/gpu/todo.rst linux-libre-6.6.147-gnu/Documentation/gpu/todo.rst
index 03fe5d1247be2..85bbe05436098 100644
--- linux-libre-6.6-gnu/Documentation/gpu/todo.rst
+++ linux-libre-6.6.147-gnu/Documentation/gpu/todo.rst
@@ -337,8 +337,8 @@ connector register/unregister fixes
 
 Level: Intermediate
 
-Remove load/unload callbacks from all non-DRIVER_LEGACY drivers
----------------------------------------------------------------
+Remove load/unload callbacks
+----------------------------
 
 The load/unload callbacks in struct &drm_driver are very much midlayers, plus
 for historical reasons they get the ordering wrong (and we can't fix that)
@@ -347,8 +347,7 @@ between setting up the &drm_driver structure and calling drm_dev_register().
 - Rework drivers to no longer use the load/unload callbacks, directly coding the
   load/unload sequence into the driver's probe function.
 
-- Once all non-DRIVER_LEGACY drivers are converted, disallow the load/unload
-  callbacks for all modern drivers.
+- Once all drivers are converted, remove the load/unload callbacks.
 
 Contact: Daniel Vetter
 
diff --git linux-libre-6.6-gnu/Documentation/hwmon/adm1177.rst linux-libre-6.6.147-gnu/Documentation/hwmon/adm1177.rst
index 1c85a2af92bf7..375f6d6e03a7d 100644
--- linux-libre-6.6-gnu/Documentation/hwmon/adm1177.rst
+++ linux-libre-6.6.147-gnu/Documentation/hwmon/adm1177.rst
@@ -27,10 +27,10 @@ for details.
 Sysfs entries
 -------------
 
-The following attributes are supported. Current maxim attribute
+The following attributes are supported. Current maximum attribute
 is read-write, all other attributes are read-only.
 
-in0_input		Measured voltage in microvolts.
+in0_input		Measured voltage in millivolts.
 
-curr1_input		Measured current in microamperes.
-curr1_max_alarm		Overcurrent alarm in microamperes.
+curr1_input		Measured current in milliamperes.
+curr1_max		Overcurrent shutdown threshold in milliamperes.
diff --git linux-libre-6.6-gnu/Documentation/hwmon/aht10.rst linux-libre-6.6.147-gnu/Documentation/hwmon/aht10.rst
index 213644b4ecba6..7903b6434326d 100644
--- linux-libre-6.6-gnu/Documentation/hwmon/aht10.rst
+++ linux-libre-6.6.147-gnu/Documentation/hwmon/aht10.rst
@@ -20,6 +20,14 @@ Supported chips:
 
       English: http://www.aosong.com/userfiles/files/media/Data%20Sheet%20AHT20.pdf
 
+  * Aosong DHT20
+
+    Prefix: 'dht20'
+
+    Addresses scanned: None
+
+    Datasheet: https://www.digikey.co.nz/en/htmldatasheets/production/9184855/0/0/1/101020932
+
 Author: Johannes Cornelis Draaijer <jcdra1@gmail.com>
 
 
@@ -33,7 +41,7 @@ The address of this i2c device may only be 0x38
 Special Features
 ----------------
 
-AHT20 has additional CRC8 support which is sent as the last byte of the sensor
+AHT20, DHT20 has additional CRC8 support which is sent as the last byte of the sensor
 values.
 
 Usage Notes
diff --git linux-libre-6.6-gnu/Documentation/hwmon/corsair-psu.rst linux-libre-6.6.147-gnu/Documentation/hwmon/corsair-psu.rst
index 16db34d464dd6..7ed794087f848 100644
--- linux-libre-6.6-gnu/Documentation/hwmon/corsair-psu.rst
+++ linux-libre-6.6.147-gnu/Documentation/hwmon/corsair-psu.rst
@@ -15,11 +15,11 @@ Supported devices:
 
   Corsair HX850i
 
-  Corsair HX1000i (Series 2022 and 2023)
+  Corsair HX1000i (Legacy and Series 2023)
 
-  Corsair HX1200i
+  Corsair HX1200i (Legacy and Series 2023)
 
-  Corsair HX1500i (Series 2022 and 2023)
+  Corsair HX1500i (Legacy and Series 2023)
 
   Corsair RM550i
 
diff --git linux-libre-6.6-gnu/Documentation/hwmon/dell-smm-hwmon.rst linux-libre-6.6.147-gnu/Documentation/hwmon/dell-smm-hwmon.rst
index d8f1d6859b964..1c12fbba440bc 100644
--- linux-libre-6.6-gnu/Documentation/hwmon/dell-smm-hwmon.rst
+++ linux-libre-6.6.147-gnu/Documentation/hwmon/dell-smm-hwmon.rst
@@ -32,12 +32,12 @@ Temperature sensors and fans can be queried and set via the standard
 =============================== ======= =======================================
 Name				Perm	Description
 =============================== ======= =======================================
-fan[1-3]_input                  RO      Fan speed in RPM.
-fan[1-3]_label                  RO      Fan label.
-fan[1-3]_min                    RO      Minimal Fan speed in RPM
-fan[1-3]_max                    RO      Maximal Fan speed in RPM
-fan[1-3]_target                 RO      Expected Fan speed in RPM
-pwm[1-3]                        RW      Control the fan PWM duty-cycle.
+fan[1-4]_input                  RO      Fan speed in RPM.
+fan[1-4]_label                  RO      Fan label.
+fan[1-4]_min                    RO      Minimal Fan speed in RPM
+fan[1-4]_max                    RO      Maximal Fan speed in RPM
+fan[1-4]_target                 RO      Expected Fan speed in RPM
+pwm[1-4]                        RW      Control the fan PWM duty-cycle.
 pwm1_enable                     WO      Enable or disable automatic BIOS fan
                                         control (not supported on all laptops,
                                         see below for details).
@@ -93,7 +93,7 @@ Again, when you find new codes, we'd be happy to have your patches!
 ---------------------------
 
 The driver also exports the fans as thermal cooling devices with
-``type`` set to ``dell-smm-fan[1-3]``. This allows for easy fan control
+``type`` set to ``dell-smm-fan[1-4]``. This allows for easy fan control
 using one of the thermal governors.
 
 Module parameters
diff --git linux-libre-6.6-gnu/Documentation/hwmon/peci-cputemp.rst linux-libre-6.6.147-gnu/Documentation/hwmon/peci-cputemp.rst
index fe0422248dc5e..266b62a46f49c 100644
--- linux-libre-6.6-gnu/Documentation/hwmon/peci-cputemp.rst
+++ linux-libre-6.6.147-gnu/Documentation/hwmon/peci-cputemp.rst
@@ -51,8 +51,9 @@ temp1_max		Provides thermal control temperature of the CPU package
 temp1_crit		Provides shutdown temperature of the CPU package which
 			is also known as the maximum processor junction
 			temperature, Tjmax or Tprochot.
-temp1_crit_hyst		Provides the hysteresis value from Tcontrol to Tjmax of
-			the CPU package.
+temp1_crit_hyst		Provides the hysteresis temperature of the CPU
+			package. Returns Tcontrol, the temperature at which
+			the critical condition clears.
 
 temp2_label		"DTS"
 temp2_input		Provides current temperature of the CPU package scaled
@@ -62,8 +63,9 @@ temp2_max		Provides thermal control temperature of the CPU package
 temp2_crit		Provides shutdown temperature of the CPU package which
 			is also known as the maximum processor junction
 			temperature, Tjmax or Tprochot.
-temp2_crit_hyst		Provides the hysteresis value from Tcontrol to Tjmax of
-			the CPU package.
+temp2_crit_hyst		Provides the hysteresis temperature of the CPU
+			package. Returns Tcontrol, the temperature at which
+			the critical condition clears.
 
 temp3_label		"Tcontrol"
 temp3_input		Provides current Tcontrol temperature of the CPU
diff --git linux-libre-6.6-gnu/Documentation/i2c/busses/i2c-i801.rst linux-libre-6.6.147-gnu/Documentation/i2c/busses/i2c-i801.rst
index e76e68ccf7182..47e8ac5b7099f 100644
--- linux-libre-6.6-gnu/Documentation/i2c/busses/i2c-i801.rst
+++ linux-libre-6.6.147-gnu/Documentation/i2c/busses/i2c-i801.rst
@@ -47,6 +47,9 @@ Supported adapters:
   * Intel Alder Lake (PCH)
   * Intel Raptor Lake (PCH)
   * Intel Meteor Lake (SOC and PCH)
+  * Intel Birch Stream (SOC)
+  * Intel Arrow Lake (SOC)
+  * Intel Panther Lake (SOC)
 
    Datasheets: Publicly available at the Intel website
 
diff --git linux-libre-6.6-gnu/Documentation/kbuild/modules.rst linux-libre-6.6.147-gnu/Documentation/kbuild/modules.rst
index a1f3eb7a43e23..131863142cbb3 100644
--- linux-libre-6.6-gnu/Documentation/kbuild/modules.rst
+++ linux-libre-6.6.147-gnu/Documentation/kbuild/modules.rst
@@ -128,7 +128,7 @@ executed to make module versioning work.
 
 	modules_install
 		Install the external module(s). The default location is
-		/lib/modules/<kernel_release>/extra/, but a prefix may
+		/lib/modules/<kernel_release>/updates/, but a prefix may
 		be added with INSTALL_MOD_PATH (discussed in section 5).
 
 	clean
@@ -417,7 +417,7 @@ directory:
 
 And external modules are installed in:
 
-	/lib/modules/$(KERNELRELEASE)/extra/
+	/lib/modules/$(KERNELRELEASE)/updates/
 
 5.1 INSTALL_MOD_PATH
 --------------------
@@ -438,10 +438,10 @@ And external modules are installed in:
 -------------------
 
 	External modules are by default installed to a directory under
-	/lib/modules/$(KERNELRELEASE)/extra/, but you may wish to
+	/lib/modules/$(KERNELRELEASE)/updates/, but you may wish to
 	locate modules for a specific functionality in a separate
 	directory. For this purpose, use INSTALL_MOD_DIR to specify an
-	alternative name to "extra."::
+	alternative name to "updates."::
 
 		$ make INSTALL_MOD_DIR=gandalf -C $KDIR \
 		       M=$PWD modules_install
diff --git linux-libre-6.6-gnu/Documentation/locking/hwspinlock.rst linux-libre-6.6.147-gnu/Documentation/locking/hwspinlock.rst
index 6f03713b70039..2ffaa3cbd63f1 100644
--- linux-libre-6.6-gnu/Documentation/locking/hwspinlock.rst
+++ linux-libre-6.6.147-gnu/Documentation/locking/hwspinlock.rst
@@ -85,6 +85,17 @@ is already free).
 
 Should be called from a process context (might sleep).
 
+::
+
+  int hwspin_lock_bust(struct hwspinlock *hwlock, unsigned int id);
+
+After verifying the owner of the hwspinlock, release a previously acquired
+hwspinlock; returns 0 on success, or an appropriate error code on failure
+(e.g. -EOPNOTSUPP if the bust operation is not defined for the specific
+hwspinlock).
+
+Should be called from a process context (might sleep).
+
 ::
 
   int hwspin_lock_timeout(struct hwspinlock *hwlock, unsigned int timeout);
diff --git linux-libre-6.6-gnu/Documentation/locking/seqlock.rst linux-libre-6.6.147-gnu/Documentation/locking/seqlock.rst
index bfda1a5fecadc..ec6411d02ac8f 100644
--- linux-libre-6.6-gnu/Documentation/locking/seqlock.rst
+++ linux-libre-6.6.147-gnu/Documentation/locking/seqlock.rst
@@ -153,7 +153,7 @@ Use seqcount_latch_t when the write side sections cannot be protected
 from interruption by readers. This is typically the case when the read
 side can be invoked from NMI handlers.
 
-Check `raw_write_seqcount_latch()` for more information.
+Check `write_seqcount_latch()` for more information.
 
 
 .. _seqlock_t:
diff --git linux-libre-6.6-gnu/Documentation/mm/arch_pgtable_helpers.rst linux-libre-6.6.147-gnu/Documentation/mm/arch_pgtable_helpers.rst
index c82e3ee20e51e..8c71249e7c4d0 100644
--- linux-libre-6.6-gnu/Documentation/mm/arch_pgtable_helpers.rst
+++ linux-libre-6.6.147-gnu/Documentation/mm/arch_pgtable_helpers.rst
@@ -142,7 +142,8 @@ PMD Page Table Helpers
 +---------------------------+--------------------------------------------------+
 | pmd_swp_clear_soft_dirty  | Clears a soft dirty swapped PMD                  |
 +---------------------------+--------------------------------------------------+
-| pmd_mkinvalid             | Invalidates a mapped PMD [1]                     |
+| pmd_mkinvalid             | Invalidates a present PMD; do not call for       |
+|                           | non-present PMD [1]                              |
 +---------------------------+--------------------------------------------------+
 | pmd_set_huge              | Creates a PMD huge mapping                       |
 +---------------------------+--------------------------------------------------+
@@ -198,7 +199,8 @@ PUD Page Table Helpers
 +---------------------------+--------------------------------------------------+
 | pud_mkdevmap              | Creates a ZONE_DEVICE mapped PUD                 |
 +---------------------------+--------------------------------------------------+
-| pud_mkinvalid             | Invalidates a mapped PUD [1]                     |
+| pud_mkinvalid             | Invalidates a present PUD; do not call for       |
+|                           | non-present PUD [1]                              |
 +---------------------------+--------------------------------------------------+
 | pud_set_huge              | Creates a PUD huge mapping                       |
 +---------------------------+--------------------------------------------------+
diff --git linux-libre-6.6-gnu/Documentation/mm/hugetlbfs_reserv.rst linux-libre-6.6.147-gnu/Documentation/mm/hugetlbfs_reserv.rst
index 4914fbf07966c..a49115db18c76 100644
--- linux-libre-6.6-gnu/Documentation/mm/hugetlbfs_reserv.rst
+++ linux-libre-6.6.147-gnu/Documentation/mm/hugetlbfs_reserv.rst
@@ -155,7 +155,7 @@ are enough free huge pages to accommodate the reservation.  If there are,
 the global reservation count resv_huge_pages is adjusted something like the
 following::
 
-	if (resv_needed <= (resv_huge_pages - free_huge_pages))
+	if (resv_needed <= (free_huge_pages - resv_huge_pages)
 		resv_huge_pages += resv_needed;
 
 Note that the global lock hugetlb_lock is held when checking and adjusting
diff --git linux-libre-6.6-gnu/Documentation/mm/page_table_check.rst linux-libre-6.6.147-gnu/Documentation/mm/page_table_check.rst
index c12838ce6b8de..c59f22eb6a0f9 100644
--- linux-libre-6.6-gnu/Documentation/mm/page_table_check.rst
+++ linux-libre-6.6.147-gnu/Documentation/mm/page_table_check.rst
@@ -14,7 +14,7 @@ Page table check performs extra verifications at the time when new pages become
 accessible from the userspace by getting their page table entries (PTEs PMDs
 etc.) added into the table.
 
-In case of detected corruption, the kernel is crashed. There is a small
+In case of most detected corruption, the kernel is crashed. There is a small
 performance and memory overhead associated with the page table check. Therefore,
 it is disabled by default, but can be optionally enabled on systems where the
 extra hardening outweighs the performance costs. Also, because page table check
@@ -22,6 +22,13 @@ is synchronous, it can help with debugging double map memory corruption issues,
 by crashing kernel at the time wrong mapping occurs instead of later which is
 often the case with memory corruptions bugs.
 
+It can also be used to do page table entry checks over various flags, dump
+warnings when illegal combinations of entry flags are detected.  Currently,
+userfaultfd is the only user of such to sanity check wr-protect bit against
+any writable flags.  Illegal flag combinations will not directly cause data
+corruption in this case immediately, but that will cause read-only data to
+be writable, leading to corrupt when the page content is later modified.
+
 Double mapping detection logic
 ==============================
 
diff --git linux-libre-6.6-gnu/Documentation/netlink/specs/ethtool.yaml linux-libre-6.6.147-gnu/Documentation/netlink/specs/ethtool.yaml
index 837b565577ca6..b463949736c56 100644
--- linux-libre-6.6-gnu/Documentation/netlink/specs/ethtool.yaml
+++ linux-libre-6.6.147-gnu/Documentation/netlink/specs/ethtool.yaml
@@ -64,7 +64,12 @@ attribute-sets:
         name: bits
         type: nest
         nested-attributes: bitset-bits
-
+      -
+        name: value
+        type: binary
+      -
+        name: mask
+        type: binary
   -
     name: string
     attributes:
@@ -1484,9 +1489,6 @@ operations:
 
       do: &module-eeprom-get-op
         request:
-          attributes:
-            - header
-        reply:
           attributes:
             - header
             - offset
@@ -1494,6 +1496,9 @@ operations:
             - page
             - bank
             - i2c-address
+        reply:
+          attributes:
+            - header
             - data
       dump: *module-eeprom-get-op
     -
diff --git linux-libre-6.6-gnu/Documentation/netlink/specs/fou.yaml linux-libre-6.6.147-gnu/Documentation/netlink/specs/fou.yaml
index 0af5ab842c04d..91721ee406413 100644
--- linux-libre-6.6-gnu/Documentation/netlink/specs/fou.yaml
+++ linux-libre-6.6.147-gnu/Documentation/netlink/specs/fou.yaml
@@ -39,6 +39,8 @@ attribute-sets:
       -
         name: ipproto
         type: u8
+        checks:
+          min: 1
       -
         name: type
         type: u8
diff --git linux-libre-6.6-gnu/Documentation/netlink/specs/handshake.yaml linux-libre-6.6.147-gnu/Documentation/netlink/specs/handshake.yaml
index 6d89e30f5fd52..0888c39ec2bcd 100644
--- linux-libre-6.6-gnu/Documentation/netlink/specs/handshake.yaml
+++ linux-libre-6.6.147-gnu/Documentation/netlink/specs/handshake.yaml
@@ -113,6 +113,7 @@ operations:
       name: done
       doc: Handler reports handshake completion
       attribute-set: done
+      flags: [admin-perm]
       do:
         request:
           attributes:
diff --git linux-libre-6.6-gnu/Documentation/netlink/specs/rt_link.yaml linux-libre-6.6.147-gnu/Documentation/netlink/specs/rt_link.yaml
index d86a68f8475ca..a8a1466adf179 100644
--- linux-libre-6.6-gnu/Documentation/netlink/specs/rt_link.yaml
+++ linux-libre-6.6.147-gnu/Documentation/netlink/specs/rt_link.yaml
@@ -892,11 +892,10 @@ attribute-sets:
       -
         name: prop-list
         type: nest
-        nested-attributes: link-attrs
+        nested-attributes: prop-list-link-attrs
       -
         name: alt-ifname
         type: string
-        multi-attr: true
       -
         name: perm-address
         type: binary
@@ -931,6 +930,13 @@ attribute-sets:
       -
         name: gro-ipv4-max-size
         type: u32
+  -
+    name: prop-list-link-attrs
+    subset-of: link-attrs
+    attributes:
+      -
+        name: alt-ifname
+        multi-attr: true
   -
     name: af-spec-attrs
     attributes:
@@ -1193,9 +1199,10 @@ attribute-sets:
         type: u32
   -
     name: mctp-attrs
+    name-prefix: ifla-mctp-
     attributes:
       -
-        name: mctp-net
+        name: net
         type: u32
   -
     name: stats-attrs
@@ -1362,7 +1369,6 @@ operations:
             - min-mtu
             - max-mtu
             - prop-list
-            - alt-ifname
             - perm-address
             - proto-down-reason
             - parent-dev-name
diff --git linux-libre-6.6-gnu/Documentation/networking/bonding.rst linux-libre-6.6.147-gnu/Documentation/networking/bonding.rst
index f7a73421eb76a..94ef39457a622 100644
--- linux-libre-6.6-gnu/Documentation/networking/bonding.rst
+++ linux-libre-6.6.147-gnu/Documentation/networking/bonding.rst
@@ -193,6 +193,15 @@ ad_actor_sys_prio
 	This parameter has effect only in 802.3ad mode and is available through
 	SysFs interface.
 
+actor_port_prio
+
+	In an AD system, this specifies the port priority. The allowed range
+	is 1 - 65535. If the value is not specified, it takes 255 as the
+	default value.
+
+	This parameter has effect only in 802.3ad mode and is available through
+	netlink interface.
+
 ad_actor_system
 
 	In an AD system, this specifies the mac-address for the actor in
@@ -444,6 +453,18 @@ arp_missed_max
 
 	The default value is 2, and the allowable range is 1 - 255.
 
+coupled_control
+
+    Specifies whether the LACP state machine's MUX in the 802.3ad mode
+    should have separate Collecting and Distributing states.
+
+    This is by implementing the independent control state machine per
+    IEEE 802.1AX-2008 5.4.15 in addition to the existing coupled control
+    state machine.
+
+    The default value is 1. This setting does not separate the Collecting
+    and Distributing states, maintaining the bond in coupled control.
+
 downdelay
 
 	Specifies the time, in milliseconds, to wait before disabling
@@ -550,6 +571,12 @@ lacp_rate
 
 	The default is slow.
 
+broadcast_neighbor
+
+	Option specifying whether to broadcast ARP/ND packets to all
+	active slaves.  This option has no effect in modes other than
+	802.3ad mode.  The default is off (0).
+
 max_bonds
 
 	Specifies the number of bonding devices to create for this
diff --git linux-libre-6.6-gnu/Documentation/networking/can.rst linux-libre-6.6.147-gnu/Documentation/networking/can.rst
index d7e1ada905b2d..3bdd155838105 100644
--- linux-libre-6.6-gnu/Documentation/networking/can.rst
+++ linux-libre-6.6.147-gnu/Documentation/networking/can.rst
@@ -740,7 +740,7 @@ The broadcast manager sends responses to user space in the same form:
             struct timeval ival1, ival2;    /* count and subsequent interval */
             canid_t can_id;                 /* unique can_id for task */
             __u32 nframes;                  /* number of can_frames following */
-            struct can_frame frames[0];
+            struct can_frame frames[];
     };
 
 The aligned payload 'frames' uses the same basic CAN frame structure defined
diff --git linux-libre-6.6-gnu/Documentation/networking/device_drivers/ethernet/amazon/ena.rst linux-libre-6.6.147-gnu/Documentation/networking/device_drivers/ethernet/amazon/ena.rst
index 5eaa3ab6c73e7..b842bcb14255b 100644
--- linux-libre-6.6-gnu/Documentation/networking/device_drivers/ethernet/amazon/ena.rst
+++ linux-libre-6.6.147-gnu/Documentation/networking/device_drivers/ethernet/amazon/ena.rst
@@ -54,6 +54,7 @@ ena_common_defs.h   Common definitions for ena_com layer.
 ena_regs_defs.h     Definition of ENA PCI memory-mapped (MMIO) registers.
 ena_netdev.[ch]     Main Linux kernel driver.
 ena_ethtool.c       ethtool callbacks.
+ena_xdp.[ch]        XDP files
 ena_pci_id_tbl.h    Supported device IDs.
 =================   ======================================================
 
diff --git linux-libre-6.6-gnu/Documentation/networking/device_drivers/ethernet/marvell/octeon_ep.rst linux-libre-6.6.147-gnu/Documentation/networking/device_drivers/ethernet/marvell/octeon_ep.rst
index cad96c8d1f97d..613a818d5db6e 100644
--- linux-libre-6.6-gnu/Documentation/networking/device_drivers/ethernet/marvell/octeon_ep.rst
+++ linux-libre-6.6.147-gnu/Documentation/networking/device_drivers/ethernet/marvell/octeon_ep.rst
@@ -24,6 +24,10 @@ Supported Devices
 Currently, this driver support following devices:
  * Network controller: Cavium, Inc. Device b200
  * Network controller: Cavium, Inc. Device b400
+ * Network controller: Cavium, Inc. Device b900
+ * Network controller: Cavium, Inc. Device ba00
+ * Network controller: Cavium, Inc. Device bc00
+ * Network controller: Cavium, Inc. Device bd00
 
 Interface Control
 =================
diff --git linux-libre-6.6-gnu/Documentation/networking/devlink/devlink-port.rst linux-libre-6.6.147-gnu/Documentation/networking/devlink/devlink-port.rst
index e33ad2401ad70..562f46b412744 100644
--- linux-libre-6.6-gnu/Documentation/networking/devlink/devlink-port.rst
+++ linux-libre-6.6.147-gnu/Documentation/networking/devlink/devlink-port.rst
@@ -126,7 +126,7 @@ Users may also set the RoCE capability of the function using
 `devlink port function set roce` command.
 
 Users may also set the function as migratable using
-'devlink port function set migratable' command.
+`devlink port function set migratable` command.
 
 Users may also set the IPsec crypto capability of the function using
 `devlink port function set ipsec_crypto` command.
diff --git linux-libre-6.6-gnu/Documentation/networking/ip-sysctl.rst linux-libre-6.6.147-gnu/Documentation/networking/ip-sysctl.rst
index a66054d0763a6..531a070df2a6b 100644
--- linux-libre-6.6-gnu/Documentation/networking/ip-sysctl.rst
+++ linux-libre-6.6.147-gnu/Documentation/networking/ip-sysctl.rst
@@ -745,6 +745,13 @@ tcp_comp_sack_nr - INTEGER
 
 	Default : 44
 
+tcp_backlog_ack_defer - BOOLEAN
+	If set, user thread processing socket backlog tries sending
+	one ACK for the whole queue. This helps to avoid potential
+	long latencies at end of a TCP socket syscall.
+
+	Default : true
+
 tcp_slow_start_after_idle - BOOLEAN
 	If set, provide RFC2861 behavior and time out the congestion
 	window after an idle period.  An idle period is defined at
@@ -1176,6 +1183,19 @@ tcp_plb_cong_thresh - INTEGER
 
 	Default: 128
 
+tcp_pingpong_thresh - INTEGER
+	The number of estimated data replies sent for estimated incoming data
+	requests that must happen before TCP considers that a connection is a
+	"ping-pong" (request-response) connection for which delayed
+	acknowledgments can provide benefits.
+
+	This threshold is 1 by default, but some applications may need a higher
+	threshold for optimal performance.
+
+	Possible Values: 1 - 255
+
+	Default: 1
+
 UDP variables
 =============
 
diff --git linux-libre-6.6-gnu/Documentation/networking/j1939.rst linux-libre-6.6.147-gnu/Documentation/networking/j1939.rst
index e4bd7aa1f5aa9..544bad175aae2 100644
--- linux-libre-6.6-gnu/Documentation/networking/j1939.rst
+++ linux-libre-6.6.147-gnu/Documentation/networking/j1939.rst
@@ -121,7 +121,7 @@ format, the Group Extension is set in the PS-field.
 
 On the other hand, when using PDU1 format, the PS-field contains a so-called
 Destination Address, which is _not_ part of the PGN. When communicating a PGN
-from user space to kernel (or vice versa) and PDU2 format is used, the PS-field
+from user space to kernel (or vice versa) and PDU1 format is used, the PS-field
 of the PGN shall be set to zero. The Destination Address shall be set
 elsewhere.
 
diff --git linux-libre-6.6-gnu/Documentation/networking/mptcp-sysctl.rst linux-libre-6.6.147-gnu/Documentation/networking/mptcp-sysctl.rst
index 15f1919d640c0..b797f3dd4b692 100644
--- linux-libre-6.6-gnu/Documentation/networking/mptcp-sysctl.rst
+++ linux-libre-6.6.147-gnu/Documentation/networking/mptcp-sysctl.rst
@@ -20,6 +20,8 @@ add_addr_timeout - INTEGER (seconds)
 	resent to an MPTCP peer that has not acknowledged a previous
 	ADD_ADDR message.
 
+	Do not retransmit if set to 0.
+
 	The default value matches TCP_RTO_MAX. This is a per-namespace
 	sysctl.
 
diff --git linux-libre-6.6-gnu/Documentation/networking/seg6-sysctl.rst linux-libre-6.6.147-gnu/Documentation/networking/seg6-sysctl.rst
index 07c20e470bafe..1b6af4779be11 100644
--- linux-libre-6.6-gnu/Documentation/networking/seg6-sysctl.rst
+++ linux-libre-6.6.147-gnu/Documentation/networking/seg6-sysctl.rst
@@ -25,6 +25,9 @@ seg6_require_hmac - INTEGER
 
 	Default is 0.
 
+/proc/sys/net/ipv6/seg6_* variables:
+====================================
+
 seg6_flowlabel - INTEGER
 	Controls the behaviour of computing the flowlabel of outer
 	IPv6 header in case of SR T.encaps
diff --git linux-libre-6.6-gnu/Documentation/networking/strparser.rst linux-libre-6.6.147-gnu/Documentation/networking/strparser.rst
index 6cab1f74ae05a..7f623d1db72aa 100644
--- linux-libre-6.6-gnu/Documentation/networking/strparser.rst
+++ linux-libre-6.6.147-gnu/Documentation/networking/strparser.rst
@@ -112,7 +112,7 @@ Functions
 Callbacks
 =========
 
-There are six callbacks:
+There are seven callbacks:
 
     ::
 
@@ -182,6 +182,13 @@ There are six callbacks:
     the length of the message. skb->len - offset may be greater
     then full_len since strparser does not trim the skb.
 
+    ::
+
+	int (*read_sock)(struct strparser *strp, read_descriptor_t *desc,
+                     sk_read_actor_t recv_actor);
+
+    The read_sock callback is used by strparser instead of
+    sock->ops->read_sock, if provided.
     ::
 
 	int (*read_sock_done)(struct strparser *strp, int err);
diff --git linux-libre-6.6-gnu/Documentation/power/runtime_pm.rst linux-libre-6.6.147-gnu/Documentation/power/runtime_pm.rst
index 65b86e487afe0..f6a7cffdc1292 100644
--- linux-libre-6.6-gnu/Documentation/power/runtime_pm.rst
+++ linux-libre-6.6.147-gnu/Documentation/power/runtime_pm.rst
@@ -347,7 +347,9 @@ drivers/base/power/runtime.c and include/linux/pm_runtime.h:
 
   `int pm_runtime_resume_and_get(struct device *dev);`
     - run pm_runtime_resume(dev) and if successful, increment the device's
-      usage counter; return the result of pm_runtime_resume
+      usage counter; returns 0 on success (whether or not the device's
+      runtime PM status was already 'active') or the error code from
+      pm_runtime_resume() on failure.
 
   `int pm_request_idle(struct device *dev);`
     - submit a request to execute the subsystem-level idle callback for the
@@ -396,10 +398,9 @@ drivers/base/power/runtime.c and include/linux/pm_runtime.h:
       nonzero, increment the counter and return 1; otherwise return 0 without
       changing the counter
 
-  `int pm_runtime_get_if_active(struct device *dev, bool ign_usage_count);`
+  `int pm_runtime_get_if_active(struct device *dev);`
     - return -EINVAL if 'power.disable_depth' is nonzero; otherwise, if the
-      runtime PM status is RPM_ACTIVE, and either ign_usage_count is true
-      or the device's usage_count is non-zero, increment the counter and
+      runtime PM status is RPM_ACTIVE, increment the counter and
       return 1; otherwise return 0 without changing the counter
 
   `void pm_runtime_put_noidle(struct device *dev);`
diff --git linux-libre-6.6-gnu/Documentation/powerpc/features.rst linux-libre-6.6.147-gnu/Documentation/powerpc/features.rst
index aeae73df86b0c..ee4b95e04202d 100644
--- linux-libre-6.6-gnu/Documentation/powerpc/features.rst
+++ linux-libre-6.6.147-gnu/Documentation/powerpc/features.rst
@@ -1,3 +1,3 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-.. kernel-feat:: $srctree/Documentation/features powerpc
+.. kernel-feat:: features powerpc
diff --git linux-libre-6.6-gnu/Documentation/process/2.Process.rst linux-libre-6.6.147-gnu/Documentation/process/2.Process.rst
index 613a01da4717a..90045a4f8c701 100644
--- linux-libre-6.6-gnu/Documentation/process/2.Process.rst
+++ linux-libre-6.6.147-gnu/Documentation/process/2.Process.rst
@@ -104,8 +104,10 @@ kernels go out with a handful of known regressions though, hopefully, none
 of them are serious.
 
 Once a stable release is made, its ongoing maintenance is passed off to the
-"stable team," currently Greg Kroah-Hartman. The stable team will release
-occasional updates to the stable release using the 5.x.y numbering scheme.
+"stable team," currently consists of Greg Kroah-Hartman and Sasha Levin. The
+stable team will release occasional updates to the stable release using the
+5.x.y numbering scheme.
+
 To be considered for an update release, a patch must (1) fix a significant
 bug, and (2) already be merged into the mainline for the next development
 kernel. Kernels will typically receive stable updates for a little more
diff --git linux-libre-6.6-gnu/Documentation/process/changes.rst linux-libre-6.6.147-gnu/Documentation/process/changes.rst
index b48da698d6f25..bb96ca0f774b9 100644
--- linux-libre-6.6-gnu/Documentation/process/changes.rst
+++ linux-libre-6.6.147-gnu/Documentation/process/changes.rst
@@ -31,7 +31,7 @@ you probably needn't concern yourself with pcmciautils.
 ====================== ===============  ========================================
 GNU C                  5.1              gcc --version
 Clang/LLVM (optional)  11.0.0           clang --version
-Rust (optional)        1.71.1           rustc --version
+Rust (optional)        1.73.0           rustc --version
 bindgen (optional)     0.65.1           bindgen --version
 GNU make               3.82             make --version
 bash                   4.2              bash --version
diff --git linux-libre-6.6-gnu/Documentation/riscv/features.rst linux-libre-6.6.147-gnu/Documentation/riscv/features.rst
index c70ef6ac2368c..36e90144adabd 100644
--- linux-libre-6.6-gnu/Documentation/riscv/features.rst
+++ linux-libre-6.6.147-gnu/Documentation/riscv/features.rst
@@ -1,3 +1,3 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-.. kernel-feat:: $srctree/Documentation/features riscv
+.. kernel-feat:: features riscv
diff --git linux-libre-6.6-gnu/Documentation/scheduler/sched-capacity.rst linux-libre-6.6.147-gnu/Documentation/scheduler/sched-capacity.rst
index e2c1cf7431588..de414b33dd2ab 100644
--- linux-libre-6.6-gnu/Documentation/scheduler/sched-capacity.rst
+++ linux-libre-6.6.147-gnu/Documentation/scheduler/sched-capacity.rst
@@ -39,14 +39,15 @@ per Hz, leading to::
 -------------------
 
 Two different capacity values are used within the scheduler. A CPU's
-``capacity_orig`` is its maximum attainable capacity, i.e. its maximum
-attainable performance level. A CPU's ``capacity`` is its ``capacity_orig`` to
-which some loss of available performance (e.g. time spent handling IRQs) is
-subtracted.
+``original capacity`` is its maximum attainable capacity, i.e. its maximum
+attainable performance level. This original capacity is returned by
+the function arch_scale_cpu_capacity(). A CPU's ``capacity`` is its ``original
+capacity`` to which some loss of available performance (e.g. time spent
+handling IRQs) is subtracted.
 
 Note that a CPU's ``capacity`` is solely intended to be used by the CFS class,
-while ``capacity_orig`` is class-agnostic. The rest of this document will use
-the term ``capacity`` interchangeably with ``capacity_orig`` for the sake of
+while ``original capacity`` is class-agnostic. The rest of this document will use
+the term ``capacity`` interchangeably with ``original capacity`` for the sake of
 brevity.
 
 1.3 Platform examples
diff --git linux-libre-6.6-gnu/Documentation/sound/soc/dapm.rst linux-libre-6.6.147-gnu/Documentation/sound/soc/dapm.rst
index 8e44107933abf..c3154ce6e1b27 100644
--- linux-libre-6.6-gnu/Documentation/sound/soc/dapm.rst
+++ linux-libre-6.6.147-gnu/Documentation/sound/soc/dapm.rst
@@ -234,7 +234,7 @@ corresponding soft power control. In this case it is necessary to create
 a virtual widget - a widget with no control bits e.g.
 ::
 
-  SND_SOC_DAPM_MIXER("AC97 Mixer", SND_SOC_DAPM_NOPM, 0, 0, NULL, 0),
+  SND_SOC_DAPM_MIXER("AC97 Mixer", SND_SOC_NOPM, 0, 0, NULL, 0),
 
 This can be used to merge to signal paths together in software.
 
diff --git linux-libre-6.6-gnu/Documentation/sphinx/cdomain.py linux-libre-6.6.147-gnu/Documentation/sphinx/cdomain.py
index a99716bf44b55..de5d132d94c59 100644
--- linux-libre-6.6-gnu/Documentation/sphinx/cdomain.py
+++ linux-libre-6.6.147-gnu/Documentation/sphinx/cdomain.py
@@ -93,7 +93,7 @@ def markup_ctype_refs(match):
 #
 RE_expr = re.compile(r':c:(expr|texpr):`([^\`]+)`')
 def markup_c_expr(match):
-    return '\ ``' + match.group(2) + '``\ '
+    return '\\ ``' + match.group(2) + '``\\ '
 
 #
 # Parse Sphinx 3.x C markups, replacing them by backward-compatible ones
diff --git linux-libre-6.6-gnu/Documentation/sphinx/kernel_abi.py linux-libre-6.6.147-gnu/Documentation/sphinx/kernel_abi.py
index b5feb5b1d9054..5911bd0d79657 100644
--- linux-libre-6.6-gnu/Documentation/sphinx/kernel_abi.py
+++ linux-libre-6.6.147-gnu/Documentation/sphinx/kernel_abi.py
@@ -39,8 +39,6 @@ import sys
 import re
 import kernellog
 
-from os import path
-
 from docutils import nodes, statemachine
 from docutils.statemachine import ViewList
 from docutils.parsers.rst import directives, Directive
@@ -73,60 +71,26 @@ class KernelCmd(Directive):
     }
 
     def run(self):
-
         doc = self.state.document
         if not doc.settings.file_insertion_enabled:
             raise self.warning("docutils: file insertion disabled")
 
-        env = doc.settings.env
-        cwd = path.dirname(doc.current_source)
-        cmd = "get_abi.pl rest --enable-lineno --dir "
-        cmd += self.arguments[0]
-
-        if 'rst' in self.options:
-            cmd += " --rst-source"
+        srctree = os.path.abspath(os.environ["srctree"])
 
-        srctree = path.abspath(os.environ["srctree"])
+        args = [
+            os.path.join(srctree, 'scripts/get_abi.pl'),
+            'rest',
+            '--enable-lineno',
+            '--dir', os.path.join(srctree, 'Documentation', self.arguments[0]),
+        ]
 
-        fname = cmd
-
-        # extend PATH with $(srctree)/scripts
-        path_env = os.pathsep.join([
-            srctree + os.sep + "scripts",
-            os.environ["PATH"]
-        ])
-        shell_env = os.environ.copy()
-        shell_env["PATH"]    = path_env
-        shell_env["srctree"] = srctree
+        if 'rst' in self.options:
+            args.append('--rst-source')
 
-        lines = self.runCmd(cmd, shell=True, cwd=cwd, env=shell_env)
+        lines = subprocess.check_output(args, cwd=os.path.dirname(doc.current_source)).decode('utf-8')
         nodeList = self.nestedParse(lines, self.arguments[0])
         return nodeList
 
-    def runCmd(self, cmd, **kwargs):
-        u"""Run command ``cmd`` and return its stdout as unicode."""
-
-        try:
-            proc = subprocess.Popen(
-                cmd
-                , stdout = subprocess.PIPE
-                , stderr = subprocess.PIPE
-                , **kwargs
-            )
-            out, err = proc.communicate()
-
-            out, err = codecs.decode(out, 'utf-8'), codecs.decode(err, 'utf-8')
-
-            if proc.returncode != 0:
-                raise self.severe(
-                    u"command '%s' failed with return code %d"
-                    % (cmd, proc.returncode)
-                )
-        except OSError as exc:
-            raise self.severe(u"problems with '%s' directive: %s."
-                              % (self.name, ErrorString(exc)))
-        return out
-
     def nestedParse(self, lines, fname):
         env = self.state.document.settings.env
         content = ViewList()
@@ -138,7 +102,7 @@ class KernelCmd(Directive):
                 code_block += "\n    " + l
             lines = code_block + "\n\n"
 
-        line_regex = re.compile("^\.\. LINENO (\S+)\#([0-9]+)$")
+        line_regex = re.compile(r"^\.\. LINENO (\S+)\#([0-9]+)$")
         ln = 0
         n = 0
         f = fname
diff --git linux-libre-6.6-gnu/Documentation/sphinx/kernel_feat.py linux-libre-6.6.147-gnu/Documentation/sphinx/kernel_feat.py
index 27b701ed3681e..03ace5f01b5c0 100644
--- linux-libre-6.6-gnu/Documentation/sphinx/kernel_feat.py
+++ linux-libre-6.6.147-gnu/Documentation/sphinx/kernel_feat.py
@@ -37,8 +37,6 @@ import re
 import subprocess
 import sys
 
-from os import path
-
 from docutils import nodes, statemachine
 from docutils.statemachine import ViewList
 from docutils.parsers.rst import directives, Directive
@@ -76,35 +74,28 @@ class KernelFeat(Directive):
         self.state.document.settings.env.app.warn(message, prefix="")
 
     def run(self):
-
         doc = self.state.document
         if not doc.settings.file_insertion_enabled:
             raise self.warning("docutils: file insertion disabled")
 
         env = doc.settings.env
-        cwd = path.dirname(doc.current_source)
-        cmd = "get_feat.pl rest --enable-fname --dir "
-        cmd += self.arguments[0]
-
-        if len(self.arguments) > 1:
-            cmd += " --arch " + self.arguments[1]
 
-        srctree = path.abspath(os.environ["srctree"])
+        srctree = os.path.abspath(os.environ["srctree"])
 
-        fname = cmd
+        args = [
+            os.path.join(srctree, 'scripts/get_feat.pl'),
+            'rest',
+            '--enable-fname',
+            '--dir',
+            os.path.join(srctree, 'Documentation', self.arguments[0]),
+        ]
 
-        # extend PATH with $(srctree)/scripts
-        path_env = os.pathsep.join([
-            srctree + os.sep + "scripts",
-            os.environ["PATH"]
-        ])
-        shell_env = os.environ.copy()
-        shell_env["PATH"]    = path_env
-        shell_env["srctree"] = srctree
+        if len(self.arguments) > 1:
+            args.extend(['--arch', self.arguments[1]])
 
-        lines = self.runCmd(cmd, shell=True, cwd=cwd, env=shell_env)
+        lines = subprocess.check_output(args, cwd=os.path.dirname(doc.current_source)).decode('utf-8')
 
-        line_regex = re.compile("^\.\. FILE (\S+)$")
+        line_regex = re.compile(r"^\.\. FILE (\S+)$")
 
         out_lines = ""
 
@@ -118,33 +109,9 @@ class KernelFeat(Directive):
             else:
                 out_lines += line + "\n"
 
-        nodeList = self.nestedParse(out_lines, fname)
+        nodeList = self.nestedParse(out_lines, self.arguments[0])
         return nodeList
 
-    def runCmd(self, cmd, **kwargs):
-        u"""Run command ``cmd`` and return its stdout as unicode."""
-
-        try:
-            proc = subprocess.Popen(
-                cmd
-                , stdout = subprocess.PIPE
-                , stderr = subprocess.PIPE
-                , **kwargs
-            )
-            out, err = proc.communicate()
-
-            out, err = codecs.decode(out, 'utf-8'), codecs.decode(err, 'utf-8')
-
-            if proc.returncode != 0:
-                raise self.severe(
-                    u"command '%s' failed with return code %d"
-                    % (cmd, proc.returncode)
-                )
-        except OSError as exc:
-            raise self.severe(u"problems with '%s' directive: %s."
-                              % (self.name, ErrorString(exc)))
-        return out
-
     def nestedParse(self, lines, fname):
         content = ViewList()
         node    = nodes.section()
diff --git linux-libre-6.6-gnu/Documentation/sphinx/kernel_include.py linux-libre-6.6.147-gnu/Documentation/sphinx/kernel_include.py
index abe7680883771..6387624423363 100755
--- linux-libre-6.6-gnu/Documentation/sphinx/kernel_include.py
+++ linux-libre-6.6.147-gnu/Documentation/sphinx/kernel_include.py
@@ -97,7 +97,6 @@ class KernelInclude(Include):
         # HINT: this is the only line I had to change / commented out:
         #path = utils.relative_path(None, path)
 
-        path = nodes.reprunicode(path)
         encoding = self.options.get(
             'encoding', self.state.document.settings.input_encoding)
         e_handler=self.state.document.settings.input_encoding_error_handler
diff --git linux-libre-6.6-gnu/Documentation/sphinx/kerneldoc.py linux-libre-6.6.147-gnu/Documentation/sphinx/kerneldoc.py
index 9395892c7ba38..8dc134904b907 100644
--- linux-libre-6.6-gnu/Documentation/sphinx/kerneldoc.py
+++ linux-libre-6.6.147-gnu/Documentation/sphinx/kerneldoc.py
@@ -130,7 +130,7 @@ class KernelDocDirective(Directive):
             result = ViewList()
 
             lineoffset = 0;
-            line_regex = re.compile("^\.\. LINENO ([0-9]+)$")
+            line_regex = re.compile(r"^\.\. LINENO ([0-9]+)$")
             for line in lines:
                 match = line_regex.search(line)
                 if match:
diff --git linux-libre-6.6-gnu/Documentation/sphinx/maintainers_include.py linux-libre-6.6.147-gnu/Documentation/sphinx/maintainers_include.py
index 328b3631a585c..dcad0fff4723e 100755
--- linux-libre-6.6-gnu/Documentation/sphinx/maintainers_include.py
+++ linux-libre-6.6.147-gnu/Documentation/sphinx/maintainers_include.py
@@ -77,7 +77,7 @@ class MaintainersInclude(Include):
             line = line.rstrip()
 
             # Linkify all non-wildcard refs to ReST files in Documentation/.
-            pat = '(Documentation/([^\s\?\*]*)\.rst)'
+            pat = r'(Documentation/([^\s\?\*]*)\.rst)'
             m = re.search(pat, line)
             if m:
                 # maintainers.rst is in a subdirectory, so include "../".
@@ -90,11 +90,11 @@ class MaintainersInclude(Include):
                 output = "| %s" % (line.replace("\\", "\\\\"))
                 # Look for and record field letter to field name mappings:
                 #   R: Designated *reviewer*: FullName <address@domain>
-                m = re.search("\s(\S):\s", line)
+                m = re.search(r"\s(\S):\s", line)
                 if m:
                     field_letter = m.group(1)
                 if field_letter and not field_letter in fields:
-                    m = re.search("\*([^\*]+)\*", line)
+                    m = re.search(r"\*([^\*]+)\*", line)
                     if m:
                         fields[field_letter] = m.group(1)
             elif subsystems:
@@ -112,7 +112,7 @@ class MaintainersInclude(Include):
                     field_content = ""
 
                     # Collapse whitespace in subsystem name.
-                    heading = re.sub("\s+", " ", line)
+                    heading = re.sub(r"\s+", " ", line)
                     output = output + "%s\n%s" % (heading, "~" * len(heading))
                     field_prev = ""
                 else:
diff --git linux-libre-6.6-gnu/Documentation/timers/no_hz.rst linux-libre-6.6.147-gnu/Documentation/timers/no_hz.rst
index f8786be15183c..7fe8ef9718d8e 100644
--- linux-libre-6.6-gnu/Documentation/timers/no_hz.rst
+++ linux-libre-6.6.147-gnu/Documentation/timers/no_hz.rst
@@ -129,11 +129,8 @@ adaptive-tick CPUs:  At least one non-adaptive-tick CPU must remain
 online to handle timekeeping tasks in order to ensure that system
 calls like gettimeofday() returns accurate values on adaptive-tick CPUs.
 (This is not an issue for CONFIG_NO_HZ_IDLE=y because there are no running
-user processes to observe slight drifts in clock rate.)  Therefore, the
-boot CPU is prohibited from entering adaptive-ticks mode.  Specifying a
-"nohz_full=" mask that includes the boot CPU will result in a boot-time
-error message, and the boot CPU will be removed from the mask.  Note that
-this means that your system must have at least two CPUs in order for
+user processes to observe slight drifts in clock rate.) Note that this
+means that your system must have at least two CPUs in order for
 CONFIG_NO_HZ_FULL=y to do anything for you.
 
 Finally, adaptive-ticks CPUs must have their RCU callbacks offloaded.
diff --git linux-libre-6.6-gnu/Documentation/trace/events-pci.rst linux-libre-6.6.147-gnu/Documentation/trace/events-pci.rst
new file mode 100644
index 0000000000000..03ff4ad30ddfa
--- /dev/null
+++ linux-libre-6.6.147-gnu/Documentation/trace/events-pci.rst
@@ -0,0 +1,74 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===========================
+Subsystem Trace Points: PCI
+===========================
+
+Overview
+========
+The PCI tracing system provides tracepoints to monitor critical hardware events
+that can impact system performance and reliability. These events normally show
+up here:
+
+	/sys/kernel/tracing/events/pci
+
+Cf. include/trace/events/pci.h for the events definitions.
+
+Available Tracepoints
+=====================
+
+pci_hp_event
+------------
+
+Monitors PCI hotplug events including card insertion/removal and link
+state changes.
+::
+
+    pci_hp_event  "%s slot:%s, event:%s\n"
+
+**Event Types**:
+
+* ``LINK_UP`` - PCIe link established
+* ``LINK_DOWN`` - PCIe link lost
+* ``CARD_PRESENT`` - Card detected in slot
+* ``CARD_NOT_PRESENT`` - Card removed from slot
+
+**Example Usage**::
+
+    # Enable the tracepoint
+    echo 1 > /sys/kernel/debug/tracing/events/pci/pci_hp_event/enable
+
+    # Monitor events (the following output is generated when a device is hotplugged)
+    cat /sys/kernel/debug/tracing/trace_pipe
+       irq/51-pciehp-88      [001] .....  1311.177459: pci_hp_event: 0000:00:02.0 slot:10, event:CARD_PRESENT
+
+       irq/51-pciehp-88      [001] .....  1311.177566: pci_hp_event: 0000:00:02.0 slot:10, event:LINK_UP
+
+pcie_link_event
+---------------
+
+Monitors PCIe link speed changes and provides detailed link status information.
+::
+
+    pcie_link_event  "%s type:%d, reason:%d, cur_bus_speed:%d, max_bus_speed:%d, width:%u, flit_mode:%u, status:%s\n"
+
+**Parameters**:
+
+* ``type`` - PCIe device type (4=Root Port, etc.)
+* ``reason`` - Reason for link change:
+
+  - ``0`` - Link retrain
+  - ``1`` - Bus enumeration
+  - ``2`` - Bandwidth notification enable
+  - ``3`` - Bandwidth notification IRQ
+  - ``4`` - Hotplug event
+
+
+**Example Usage**::
+
+    # Enable the tracepoint
+    echo 1 > /sys/kernel/debug/tracing/events/pci/pcie_link_event/enable
+
+    # Monitor events (the following output is generated when a device is hotplugged)
+    cat /sys/kernel/debug/tracing/trace_pipe
+       irq/51-pciehp-88      [001] .....   381.545386: pcie_link_event: 0000:00:02.0 type:4, reason:4, cur_bus_speed:20, max_bus_speed:23, width:1, flit_mode:0, status:DLLLA
diff --git linux-libre-6.6-gnu/Documentation/trace/histogram-design.rst linux-libre-6.6.147-gnu/Documentation/trace/histogram-design.rst
index 5765eb3e9efa7..a30f4bed11b4e 100644
--- linux-libre-6.6-gnu/Documentation/trace/histogram-design.rst
+++ linux-libre-6.6.147-gnu/Documentation/trace/histogram-design.rst
@@ -380,7 +380,9 @@ entry, ts0, corresponding to the ts0 variable in the sched_waking
 trigger above.
 
 sched_waking histogram
-----------------------::
+----------------------
+
+.. code-block::
 
   +------------------+
   | hist_data        |<-------------------------------------------------------+
diff --git linux-libre-6.6-gnu/Documentation/trace/index.rst linux-libre-6.6.147-gnu/Documentation/trace/index.rst
index 5092d6c13af5e..e9bcb9d9f7f3b 100644
--- linux-libre-6.6-gnu/Documentation/trace/index.rst
+++ linux-libre-6.6.147-gnu/Documentation/trace/index.rst
@@ -1,37 +1,104 @@
-==========================
-Linux Tracing Technologies
-==========================
+================================
+Linux Tracing Technologies Guide
+================================
+
+Tracing in the Linux kernel is a powerful mechanism that allows
+developers and system administrators to analyze and debug system
+behavior. This guide provides documentation on various tracing
+frameworks and tools available in the Linux kernel.
+
+Introduction to Tracing
+-----------------------
+
+This section provides an overview of Linux tracing mechanisms
+and debugging approaches.
 
 .. toctree::
    :maxdepth: 2
 
-   ftrace-design
+   debugging
+   tracepoints
    tracepoint-analysis
+   ring-buffer-map
+
+Core Tracing Frameworks
+-----------------------
+
+The following are the primary tracing frameworks integrated into
+the Linux kernel.
+
+.. toctree::
+   :maxdepth: 1
+
    ftrace
+   ftrace-design
    ftrace-uses
-   fprobe
    kprobes
    kprobetrace
-   uprobetracer
    fprobetrace
-   tracepoints
+   fprobe
+   ring-buffer-design
+
+Event Tracing and Analysis
+--------------------------
+
+A detailed explanation of event tracing mechanisms and their
+applications.
+
+.. toctree::
+   :maxdepth: 1
+
    events
    events-kmem
    events-power
    events-nmi
    events-msr
-   mmiotrace
+   events-pci
+   boottime-trace
    histogram
    histogram-design
-   boottime-trace
-   hwlat_detector
-   osnoise-tracer
-   timerlat-tracer
+
+Hardware and Performance Tracing
+--------------------------------
+
+This section covers tracing features that monitor hardware
+interactions and system performance.
+
+.. toctree::
+   :maxdepth: 1
+
    intel_th
-   ring-buffer-design
    stm
    sys-t
    coresight/index
-   user_events
    rv/index
    hisi-ptt
+   mmiotrace
+   hwlat_detector
+   osnoise-tracer
+   timerlat-tracer
+
+User-Space Tracing
+------------------
+
+These tools allow tracing user-space applications and
+interactions.
+
+.. toctree::
+   :maxdepth: 1
+
+   user_events
+   uprobetracer
+
+Additional Resources
+--------------------
+
+For more details, refer to the respective documentation of each
+tracing tool and framework.
+
+.. only:: subproject and html
+
+   Indices
+   =======
+
+   * :ref:`genindex`
diff --git linux-libre-6.6-gnu/Documentation/trace/ring-buffer-map.rst linux-libre-6.6.147-gnu/Documentation/trace/ring-buffer-map.rst
new file mode 100644
index 0000000000000..8e296bcc0d7f3
--- /dev/null
+++ linux-libre-6.6.147-gnu/Documentation/trace/ring-buffer-map.rst
@@ -0,0 +1,106 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+==================================
+Tracefs ring-buffer memory mapping
+==================================
+
+:Author: Vincent Donnefort <vdonnefort@google.com>
+
+Overview
+========
+Tracefs ring-buffer memory map provides an efficient method to stream data
+as no memory copy is necessary. The application mapping the ring-buffer becomes
+then a consumer for that ring-buffer, in a similar fashion to trace_pipe.
+
+Memory mapping setup
+====================
+The mapping works with a mmap() of the trace_pipe_raw interface.
+
+The first system page of the mapping contains ring-buffer statistics and
+description. It is referred to as the meta-page. One of the most important
+fields of the meta-page is the reader. It contains the sub-buffer ID which can
+be safely read by the mapper (see ring-buffer-design.rst).
+
+The meta-page is followed by all the sub-buffers, ordered by ascending ID. It is
+therefore effortless to know where the reader starts in the mapping:
+
+.. code-block:: c
+
+        reader_id = meta->reader->id;
+        reader_offset = meta->meta_page_size + reader_id * meta->subbuf_size;
+
+When the application is done with the current reader, it can get a new one using
+the trace_pipe_raw ioctl() TRACE_MMAP_IOCTL_GET_READER. This ioctl also updates
+the meta-page fields.
+
+Limitations
+===========
+When a mapping is in place on a Tracefs ring-buffer, it is not possible to
+either resize it (either by increasing the entire size of the ring-buffer or
+each subbuf). It is also not possible to use snapshot and causes splice to copy
+the ring buffer data instead of using the copyless swap from the ring buffer.
+
+Concurrent readers (either another application mapping that ring-buffer or the
+kernel with trace_pipe) are allowed but not recommended. They will compete for
+the ring-buffer and the output is unpredictable, just like concurrent readers on
+trace_pipe would be.
+
+Example
+=======
+
+.. code-block:: c
+
+        #include <fcntl.h>
+        #include <stdio.h>
+        #include <stdlib.h>
+        #include <unistd.h>
+
+        #include <linux/trace_mmap.h>
+
+        #include <sys/mman.h>
+        #include <sys/ioctl.h>
+
+        #define TRACE_PIPE_RAW "/sys/kernel/tracing/per_cpu/cpu0/trace_pipe_raw"
+
+        int main(void)
+        {
+                int page_size = getpagesize(), fd, reader_id;
+                unsigned long meta_len, data_len;
+                struct trace_buffer_meta *meta;
+                void *map, *reader, *data;
+
+                fd = open(TRACE_PIPE_RAW, O_RDONLY | O_NONBLOCK);
+                if (fd < 0)
+                        exit(EXIT_FAILURE);
+
+                map = mmap(NULL, page_size, PROT_READ, MAP_SHARED, fd, 0);
+                if (map == MAP_FAILED)
+                        exit(EXIT_FAILURE);
+
+                meta = (struct trace_buffer_meta *)map;
+                meta_len = meta->meta_page_size;
+
+                printf("entries:        %llu\n", meta->entries);
+                printf("overrun:        %llu\n", meta->overrun);
+                printf("read:           %llu\n", meta->read);
+                printf("nr_subbufs:     %u\n", meta->nr_subbufs);
+
+                data_len = meta->subbuf_size * meta->nr_subbufs;
+                data = mmap(NULL, data_len, PROT_READ, MAP_SHARED, fd, meta_len);
+                if (data == MAP_FAILED)
+                        exit(EXIT_FAILURE);
+
+                if (ioctl(fd, TRACE_MMAP_IOCTL_GET_READER) < 0)
+                        exit(EXIT_FAILURE);
+
+                reader_id = meta->reader.id;
+                reader = data + meta->subbuf_size * reader_id;
+
+                printf("Current reader address: %p\n", reader);
+
+                munmap(data, data_len);
+                munmap(meta, meta_len);
+                close (fd);
+
+                return 0;
+        }
diff --git linux-libre-6.6-gnu/Documentation/translations/zh_CN/arch/loongarch/features.rst linux-libre-6.6.147-gnu/Documentation/translations/zh_CN/arch/loongarch/features.rst
index 82bfac180bdc0..cec38dda8298c 100644
--- linux-libre-6.6-gnu/Documentation/translations/zh_CN/arch/loongarch/features.rst
+++ linux-libre-6.6.147-gnu/Documentation/translations/zh_CN/arch/loongarch/features.rst
@@ -5,4 +5,4 @@
 :Original: Documentation/arch/loongarch/features.rst
 :Translator: Huacai Chen <chenhuacai@loongson.cn>
 
-.. kernel-feat:: $srctree/Documentation/features loongarch
+.. kernel-feat:: features loongarch
diff --git linux-libre-6.6-gnu/Documentation/translations/zh_CN/arch/mips/features.rst linux-libre-6.6.147-gnu/Documentation/translations/zh_CN/arch/mips/features.rst
index da1b956e4a40f..0d6df97db069b 100644
--- linux-libre-6.6-gnu/Documentation/translations/zh_CN/arch/mips/features.rst
+++ linux-libre-6.6.147-gnu/Documentation/translations/zh_CN/arch/mips/features.rst
@@ -10,4 +10,4 @@
 
 .. _cn_features:
 
-.. kernel-feat:: $srctree/Documentation/features mips
+.. kernel-feat:: features mips
diff --git linux-libre-6.6-gnu/Documentation/translations/zh_TW/dev-tools/index.rst linux-libre-6.6.147-gnu/Documentation/translations/zh_TW/dev-tools/index.rst
new file mode 100644
index 0000000000000..8f101db5a07ff
--- /dev/null
+++ linux-libre-6.6.147-gnu/Documentation/translations/zh_TW/dev-tools/index.rst
@@ -0,0 +1,40 @@
+.. include:: ../disclaimer-zh_TW.rst
+
+:Original: Documentation/dev-tools/index.rst
+:Translator: Min-Hua Chen <minhuadotchen@gmail.com>
+
+============
+內核開發工具
+============
+
+本文檔是有關內核開發工具文檔的合集。
+目前這些文檔已經整理在一起，不需要再花費額外的精力。
+歡迎任何補丁。
+
+有關測試專用工具的簡要概述，參見
+Documentation/dev-tools/testing-overview.rst
+
+.. class:: toc-title
+
+	   目錄
+
+.. toctree::
+   :maxdepth: 2
+
+   sparse
+
+Todolist:
+
+ - coccinelle
+ - kcov
+ - ubsan
+ - kmemleak
+ - kcsan
+ - kfence
+ - kgdb
+ - kselftest
+ - kunit/index
+ - testing-overview
+ - gcov
+ - kasan
+ - gdb-kernel-debugging
diff --git linux-libre-6.6-gnu/Documentation/translations/zh_TW/sparse.txt linux-libre-6.6.147-gnu/Documentation/translations/zh_TW/dev-tools/sparse.txt
similarity index 100%
rename from Documentation/translations/zh_TW/sparse.txt
rename to Documentation/translations/zh_TW/dev-tools/sparse.txt
diff --git linux-libre-6.6-gnu/Documentation/translations/zh_TW/index.rst linux-libre-6.6.147-gnu/Documentation/translations/zh_TW/index.rst
index d1cf0b4d8e46d..ffcaf3272fe70 100644
--- linux-libre-6.6-gnu/Documentation/translations/zh_TW/index.rst
+++ linux-libre-6.6.147-gnu/Documentation/translations/zh_TW/index.rst
@@ -55,11 +55,11 @@ TODOList:
    :maxdepth: 1
 
    process/license-rules
+   dev-tools/index
 
 TODOList:
 
 * doc-guide/index
-* dev-tools/index
 * dev-tools/testing-overview
 * kernel-hacking/index
 * rust/index
diff --git linux-libre-6.6-gnu/Documentation/userspace-api/ioctl/ioctl-number.rst linux-libre-6.6.147-gnu/Documentation/userspace-api/ioctl/ioctl-number.rst
index 4ea5b837399ad..264faaa9d7fa3 100644
--- linux-libre-6.6-gnu/Documentation/userspace-api/ioctl/ioctl-number.rst
+++ linux-libre-6.6.147-gnu/Documentation/userspace-api/ioctl/ioctl-number.rst
@@ -66,17 +66,17 @@ This table lists ioctls visible from user land for Linux/x86.  It contains
 most drivers up to 2.6.31, but I know I am missing some.  There has been
 no attempt to list non-X86 architectures or ioctls from drivers/staging/.
 
-====  =====  ======================================================= ================================================================
-Code  Seq#    Include File                                           Comments
+====  =====  ========================================================= ================================================================
+Code  Seq#    Include File                                             Comments
       (hex)
-====  =====  ======================================================= ================================================================
-0x00  00-1F  linux/fs.h                                              conflict!
-0x00  00-1F  scsi/scsi_ioctl.h                                       conflict!
-0x00  00-1F  linux/fb.h                                              conflict!
-0x00  00-1F  linux/wavefront.h                                       conflict!
+====  =====  ========================================================= ================================================================
+0x00  00-1F  linux/fs.h                                                conflict!
+0x00  00-1F  scsi/scsi_ioctl.h                                         conflict!
+0x00  00-1F  linux/fb.h                                                conflict!
+0x00  00-1F  linux/wavefront.h                                         conflict!
 0x02  all    linux/fd.h
 0x03  all    linux/hdreg.h
-0x04  D2-DC  linux/umsdos_fs.h                                       Dead since 2.6.11, but don't reuse these.
+0x04  D2-DC  linux/umsdos_fs.h                                         Dead since 2.6.11, but don't reuse these.
 0x06  all    linux/lp.h
 0x09  all    linux/raid/md_u.h
 0x10  00-0F  drivers/char/s390/vmcp.h
@@ -84,299 +84,298 @@ Code  Seq#    Include File                                           Comments
 0x10  20-2F  arch/s390/include/uapi/asm/hypfs.h
 0x12  all    linux/fs.h
              linux/blkpg.h
-0x1b  all                                                            InfiniBand Subsystem
-                                                                     <http://infiniband.sourceforge.net/>
+0x1b  all                                                              InfiniBand Subsystem
+                                                                       <http://infiniband.sourceforge.net/>
 0x20  all    drivers/cdrom/cm206.h
 0x22  all    scsi/sg.h
-0x3E  00-0F  linux/counter.h                                         <mailto:linux-iio@vger.kernel.org>
+0x3E  00-0F  linux/counter.h                                           <mailto:linux-iio@vger.kernel.org>
 '!'   00-1F  uapi/linux/seccomp.h
-'#'   00-3F                                                          IEEE 1394 Subsystem
-                                                                     Block for the entire subsystem
+'#'   00-3F                                                            IEEE 1394 Subsystem
+                                                                       Block for the entire subsystem
 '$'   00-0F  linux/perf_counter.h, linux/perf_event.h
-'%'   00-0F  include/uapi/linux/stm.h                                System Trace Module subsystem
-                                                                     <mailto:alexander.shishkin@linux.intel.com>
+'%'   00-0F  include/uapi/linux/stm.h                                  System Trace Module subsystem
+                                                                       <mailto:alexander.shishkin@linux.intel.com>
 '&'   00-07  drivers/firewire/nosy-user.h
-'1'   00-1F  linux/timepps.h                                         PPS kit from Ulrich Windl
-                                                                     <ftp://ftp.de.kernel.org/pub/linux/daemons/ntp/PPS/>
+'1'   00-1F  linux/timepps.h                                           PPS kit from Ulrich Windl
+                                                                       <ftp://ftp.de.kernel.org/pub/linux/daemons/ntp/PPS/>
 '2'   01-04  linux/i2o.h
-'3'   00-0F  drivers/s390/char/raw3270.h                             conflict!
-'3'   00-1F  linux/suspend_ioctls.h,                                 conflict!
+'3'   00-0F  drivers/s390/char/raw3270.h                               conflict!
+'3'   00-1F  linux/suspend_ioctls.h,                                   conflict!
              kernel/power/user.c
-'8'   all                                                            SNP8023 advanced NIC card
-                                                                     <mailto:mcr@solidum.com>
+'8'   all                                                              SNP8023 advanced NIC card
+                                                                       <mailto:mcr@solidum.com>
 ';'   64-7F  linux/vfio.h
 ';'   80-FF  linux/iommufd.h
-'='   00-3f  uapi/linux/ptp_clock.h                                  <mailto:richardcochran@gmail.com>
-'@'   00-0F  linux/radeonfb.h                                        conflict!
-'@'   00-0F  drivers/video/aty/aty128fb.c                            conflict!
-'A'   00-1F  linux/apm_bios.h                                        conflict!
-'A'   00-0F  linux/agpgart.h,                                        conflict!
+'='   00-3f  uapi/linux/ptp_clock.h                                    <mailto:richardcochran@gmail.com>
+'@'   00-0F  linux/radeonfb.h                                          conflict!
+'@'   00-0F  drivers/video/aty/aty128fb.c                              conflict!
+'A'   00-1F  linux/apm_bios.h                                          conflict!
+'A'   00-0F  linux/agpgart.h,                                          conflict!
              drivers/char/agp/compat_ioctl.h
-'A'   00-7F  sound/asound.h                                          conflict!
-'B'   00-1F  linux/cciss_ioctl.h                                     conflict!
-'B'   00-0F  include/linux/pmu.h                                     conflict!
-'B'   C0-FF  advanced bbus                                           <mailto:maassen@uni-freiburg.de>
-'B'   00-0F  xen/xenbus_dev.h                                        conflict!
-'C'   all    linux/soundcard.h                                       conflict!
-'C'   01-2F  linux/capi.h                                            conflict!
-'C'   F0-FF  drivers/net/wan/cosa.h                                  conflict!
+'A'   00-7F  sound/asound.h                                            conflict!
+'B'   00-1F  linux/cciss_ioctl.h                                       conflict!
+'B'   00-0F  include/linux/pmu.h                                       conflict!
+'B'   C0-FF  advanced bbus                                             <mailto:maassen@uni-freiburg.de>
+'B'   00-0F  xen/xenbus_dev.h                                          conflict!
+'C'   all    linux/soundcard.h                                         conflict!
+'C'   01-2F  linux/capi.h                                              conflict!
+'C'   F0-FF  drivers/net/wan/cosa.h                                    conflict!
 'D'   all    arch/s390/include/asm/dasd.h
-'D'   40-5F  drivers/scsi/dpt/dtpi_ioctl.h                           Dead since 2022
+'D'   40-5F  drivers/scsi/dpt/dtpi_ioctl.h                             Dead since 2022
 'D'   05     drivers/scsi/pmcraid.h
-'E'   all    linux/input.h                                           conflict!
-'E'   00-0F  xen/evtchn.h                                            conflict!
-'F'   all    linux/fb.h                                              conflict!
-'F'   01-02  drivers/scsi/pmcraid.h                                  conflict!
-'F'   20     drivers/video/fsl-diu-fb.h                              conflict!
-'F'   20     drivers/video/intelfb/intelfb.h                         conflict!
-'F'   20     linux/ivtvfb.h                                          conflict!
-'F'   20     linux/matroxfb.h                                        conflict!
-'F'   20     drivers/video/aty/atyfb_base.c                          conflict!
-'F'   00-0F  video/da8xx-fb.h                                        conflict!
-'F'   80-8F  linux/arcfb.h                                           conflict!
-'F'   DD     video/sstfb.h                                           conflict!
-'G'   00-3F  drivers/misc/sgi-gru/grulib.h                           conflict!
-'G'   00-0F  xen/gntalloc.h, xen/gntdev.h                            conflict!
-'H'   00-7F  linux/hiddev.h                                          conflict!
-'H'   00-0F  linux/hidraw.h                                          conflict!
-'H'   01     linux/mei.h                                             conflict!
-'H'   02     linux/mei.h                                             conflict!
-'H'   03     linux/mei.h                                             conflict!
-'H'   00-0F  sound/asound.h                                          conflict!
-'H'   20-40  sound/asound_fm.h                                       conflict!
-'H'   80-8F  sound/sfnt_info.h                                       conflict!
-'H'   10-8F  sound/emu10k1.h                                         conflict!
-'H'   10-1F  sound/sb16_csp.h                                        conflict!
-'H'   10-1F  sound/hda_hwdep.h                                       conflict!
-'H'   40-4F  sound/hdspm.h                                           conflict!
-'H'   40-4F  sound/hdsp.h                                            conflict!
+'E'   all    linux/input.h                                             conflict!
+'E'   00-0F  xen/evtchn.h                                              conflict!
+'F'   all    linux/fb.h                                                conflict!
+'F'   01-02  drivers/scsi/pmcraid.h                                    conflict!
+'F'   20     drivers/video/fsl-diu-fb.h                                conflict!
+'F'   20     drivers/video/intelfb/intelfb.h                           conflict!
+'F'   20     linux/ivtvfb.h                                            conflict!
+'F'   20     linux/matroxfb.h                                          conflict!
+'F'   20     drivers/video/aty/atyfb_base.c                            conflict!
+'F'   00-0F  video/da8xx-fb.h                                          conflict!
+'F'   80-8F  linux/arcfb.h                                             conflict!
+'F'   DD     video/sstfb.h                                             conflict!
+'G'   00-3F  drivers/misc/sgi-gru/grulib.h                             conflict!
+'G'   00-0F  xen/gntalloc.h, xen/gntdev.h                              conflict!
+'H'   00-7F  linux/hiddev.h                                            conflict!
+'H'   00-0F  linux/hidraw.h                                            conflict!
+'H'   01     linux/mei.h                                               conflict!
+'H'   02     linux/mei.h                                               conflict!
+'H'   03     linux/mei.h                                               conflict!
+'H'   00-0F  sound/asound.h                                            conflict!
+'H'   20-40  sound/asound_fm.h                                         conflict!
+'H'   80-8F  sound/sfnt_info.h                                         conflict!
+'H'   10-8F  sound/emu10k1.h                                           conflict!
+'H'   10-1F  sound/sb16_csp.h                                          conflict!
+'H'   10-1F  sound/hda_hwdep.h                                         conflict!
+'H'   40-4F  sound/hdspm.h                                             conflict!
+'H'   40-4F  sound/hdsp.h                                              conflict!
 'H'   90     sound/usb/usx2y/usb_stream.h
-'H'   00-0F  uapi/misc/habanalabs.h                                  conflict!
+'H'   00-0F  uapi/misc/habanalabs.h                                    conflict!
 'H'   A0     uapi/linux/usb/cdc-wdm.h
-'H'   C0-F0  net/bluetooth/hci.h                                     conflict!
-'H'   C0-DF  net/bluetooth/hidp/hidp.h                               conflict!
-'H'   C0-DF  net/bluetooth/cmtp/cmtp.h                               conflict!
-'H'   C0-DF  net/bluetooth/bnep/bnep.h                               conflict!
-'H'   F1     linux/hid-roccat.h                                      <mailto:erazor_de@users.sourceforge.net>
+'H'   C0-F0  net/bluetooth/hci.h                                       conflict!
+'H'   C0-DF  net/bluetooth/hidp/hidp.h                                 conflict!
+'H'   C0-DF  net/bluetooth/cmtp/cmtp.h                                 conflict!
+'H'   C0-DF  net/bluetooth/bnep/bnep.h                                 conflict!
+'H'   F1     linux/hid-roccat.h                                        <mailto:erazor_de@users.sourceforge.net>
 'H'   F8-FA  sound/firewire.h
-'I'   all    linux/isdn.h                                            conflict!
-'I'   00-0F  drivers/isdn/divert/isdn_divert.h                       conflict!
-'I'   40-4F  linux/mISDNif.h                                         conflict!
+'I'   all    linux/isdn.h                                              conflict!
+'I'   00-0F  drivers/isdn/divert/isdn_divert.h                         conflict!
+'I'   40-4F  linux/mISDNif.h                                           conflict!
 'K'   all    linux/kd.h
-'L'   00-1F  linux/loop.h                                            conflict!
-'L'   10-1F  drivers/scsi/mpt3sas/mpt3sas_ctl.h                      conflict!
-'L'   E0-FF  linux/ppdd.h                                            encrypted disk device driver
-                                                                     <http://linux01.gwdg.de/~alatham/ppdd.html>
-'M'   all    linux/soundcard.h                                       conflict!
-'M'   01-16  mtd/mtd-abi.h                                           conflict!
+'L'   00-1F  linux/loop.h                                              conflict!
+'L'   10-1F  drivers/scsi/mpt3sas/mpt3sas_ctl.h                        conflict!
+'L'   E0-FF  linux/ppdd.h                                              encrypted disk device driver
+                                                                       <http://linux01.gwdg.de/~alatham/ppdd.html>
+'M'   all    linux/soundcard.h                                         conflict!
+'M'   01-16  mtd/mtd-abi.h                                             conflict!
       and    drivers/mtd/mtdchar.c
 'M'   01-03  drivers/scsi/megaraid/megaraid_sas.h
-'M'   00-0F  drivers/video/fsl-diu-fb.h                              conflict!
+'M'   00-0F  drivers/video/fsl-diu-fb.h                                conflict!
 'N'   00-1F  drivers/usb/scanner.h
 'N'   40-7F  drivers/block/nvme.c
-'O'   00-06  mtd/ubi-user.h                                          UBI
-'P'   all    linux/soundcard.h                                       conflict!
-'P'   60-6F  sound/sscape_ioctl.h                                    conflict!
-'P'   00-0F  drivers/usb/class/usblp.c                               conflict!
-'P'   01-09  drivers/misc/pci_endpoint_test.c                        conflict!
-'P'   00-0F  xen/privcmd.h                                           conflict!
-'P'   00-05  linux/tps6594_pfsm.h                                    conflict!
+'O'   00-06  mtd/ubi-user.h                                            UBI
+'P'   all    linux/soundcard.h                                         conflict!
+'P'   60-6F  sound/sscape_ioctl.h                                      conflict!
+'P'   00-0F  drivers/usb/class/usblp.c                                 conflict!
+'P'   01-09  drivers/misc/pci_endpoint_test.c                          conflict!
+'P'   00-0F  xen/privcmd.h                                             conflict!
+'P'   00-05  linux/tps6594_pfsm.h                                      conflict!
 'Q'   all    linux/soundcard.h
-'R'   00-1F  linux/random.h                                          conflict!
-'R'   01     linux/rfkill.h                                          conflict!
+'R'   00-1F  linux/random.h                                            conflict!
+'R'   01     linux/rfkill.h                                            conflict!
 'R'   C0-DF  net/bluetooth/rfcomm.h
 'R'   E0     uapi/linux/fsl_mc.h
-'S'   all    linux/cdrom.h                                           conflict!
-'S'   80-81  scsi/scsi_ioctl.h                                       conflict!
-'S'   82-FF  scsi/scsi.h                                             conflict!
-'S'   00-7F  sound/asequencer.h                                      conflict!
-'T'   all    linux/soundcard.h                                       conflict!
-'T'   00-AF  sound/asound.h                                          conflict!
-'T'   all    arch/x86/include/asm/ioctls.h                           conflict!
-'T'   C0-DF  linux/if_tun.h                                          conflict!
-'U'   all    sound/asound.h                                          conflict!
-'U'   00-CF  linux/uinput.h                                          conflict!
+'S'   all    linux/cdrom.h                                             conflict!
+'S'   80-81  scsi/scsi_ioctl.h                                         conflict!
+'S'   82-FF  scsi/scsi.h                                               conflict!
+'S'   00-7F  sound/asequencer.h                                        conflict!
+'T'   all    linux/soundcard.h                                         conflict!
+'T'   00-AF  sound/asound.h                                            conflict!
+'T'   all    arch/x86/include/asm/ioctls.h                             conflict!
+'T'   C0-DF  linux/if_tun.h                                            conflict!
+'U'   all    sound/asound.h                                            conflict!
+'U'   00-CF  linux/uinput.h                                            conflict!
 'U'   00-EF  linux/usbdevice_fs.h
 'U'   C0-CF  drivers/bluetooth/hci_uart.h
-'V'   all    linux/vt.h                                              conflict!
-'V'   all    linux/videodev2.h                                       conflict!
-'V'   C0     linux/ivtvfb.h                                          conflict!
-'V'   C0     linux/ivtv.h                                            conflict!
-'V'   C0     media/si4713.h                                          conflict!
-'W'   00-1F  linux/watchdog.h                                        conflict!
-'W'   00-1F  linux/wanrouter.h                                       conflict! (pre 3.9)
-'W'   00-3F  sound/asound.h                                          conflict!
+'V'   all    linux/vt.h                                                conflict!
+'V'   all    linux/videodev2.h                                         conflict!
+'V'   C0     linux/ivtvfb.h                                            conflict!
+'V'   C0     linux/ivtv.h                                              conflict!
+'V'   C0     media/si4713.h                                            conflict!
+'W'   00-1F  linux/watchdog.h                                          conflict!
+'W'   00-1F  linux/wanrouter.h                                         conflict! (pre 3.9)
+'W'   00-3F  sound/asound.h                                            conflict!
 'W'   40-5F  drivers/pci/switch/switchtec.c
 'W'   60-61  linux/watch_queue.h
-'X'   all    fs/xfs/xfs_fs.h,                                        conflict!
+'X'   all    fs/xfs/xfs_fs.h,                                          conflict!
              fs/xfs/linux-2.6/xfs_ioctl32.h,
              include/linux/falloc.h,
              linux/fs.h,
-'X'   all    fs/ocfs2/ocfs_fs.h                                      conflict!
-'X'   01     linux/pktcdvd.h                                         conflict!
+'X'   all    fs/ocfs2/ocfs_fs.h                                        conflict!
+'X'   01     linux/pktcdvd.h                                           conflict!
 'Z'   14-15  drivers/message/fusion/mptctl.h
-'['   00-3F  linux/usb/tmc.h                                         USB Test and Measurement Devices
-                                                                     <mailto:gregkh@linuxfoundation.org>
-'a'   all    linux/atm*.h, linux/sonet.h                             ATM on linux
-                                                                     <http://lrcwww.epfl.ch/>
-'a'   00-0F  drivers/crypto/qat/qat_common/adf_cfg_common.h          conflict! qat driver
-'b'   00-FF                                                          conflict! bit3 vme host bridge
-                                                                     <mailto:natalia@nikhefk.nikhef.nl>
-'b'   00-0F  linux/dma-buf.h                                         conflict!
-'c'   00-7F  linux/comstats.h                                        conflict!
-'c'   00-7F  linux/coda.h                                            conflict!
-'c'   00-1F  linux/chio.h                                            conflict!
-'c'   80-9F  arch/s390/include/asm/chsc.h                            conflict!
+'['   00-3F  linux/usb/tmc.h                                           USB Test and Measurement Devices
+                                                                       <mailto:gregkh@linuxfoundation.org>
+'a'   all    linux/atm*.h, linux/sonet.h                               ATM on linux
+                                                                       <http://lrcwww.epfl.ch/>
+'b'   00-FF                                                            conflict! bit3 vme host bridge
+                                                                       <mailto:natalia@nikhefk.nikhef.nl>
+'b'   00-0F  linux/dma-buf.h                                           conflict!
+'c'   00-7F  linux/comstats.h                                          conflict!
+'c'   00-7F  linux/coda.h                                              conflict!
+'c'   00-1F  linux/chio.h                                              conflict!
+'c'   80-9F  arch/s390/include/asm/chsc.h                              conflict!
 'c'   A0-AF  arch/x86/include/asm/msr.h conflict!
-'d'   00-FF  linux/char/drm/drm.h                                    conflict!
-'d'   02-40  pcmcia/ds.h                                             conflict!
+'d'   00-FF  linux/char/drm/drm.h                                      conflict!
+'d'   02-40  pcmcia/ds.h                                               conflict!
 'd'   F0-FF  linux/digi1.h
-'e'   all    linux/digi1.h                                           conflict!
-'f'   00-1F  linux/ext2_fs.h                                         conflict!
-'f'   00-1F  linux/ext3_fs.h                                         conflict!
-'f'   00-0F  fs/jfs/jfs_dinode.h                                     conflict!
-'f'   00-0F  fs/ext4/ext4.h                                          conflict!
-'f'   00-0F  linux/fs.h                                              conflict!
-'f'   00-0F  fs/ocfs2/ocfs2_fs.h                                     conflict!
+'e'   all    linux/digi1.h                                             conflict!
+'f'   00-1F  linux/ext2_fs.h                                           conflict!
+'f'   00-1F  linux/ext3_fs.h                                           conflict!
+'f'   00-0F  fs/jfs/jfs_dinode.h                                       conflict!
+'f'   00-0F  fs/ext4/ext4.h                                            conflict!
+'f'   00-0F  linux/fs.h                                                conflict!
+'f'   00-0F  fs/ocfs2/ocfs2_fs.h                                       conflict!
 'f'   13-27  linux/fscrypt.h
 'f'   81-8F  linux/fsverity.h
 'g'   00-0F  linux/usb/gadgetfs.h
 'g'   20-2F  linux/usb/g_printer.h
-'h'   00-7F                                                          conflict! Charon filesystem
-                                                                     <mailto:zapman@interlan.net>
-'h'   00-1F  linux/hpet.h                                            conflict!
+'h'   00-7F                                                            conflict! Charon filesystem
+                                                                       <mailto:zapman@interlan.net>
+'h'   00-1F  linux/hpet.h                                              conflict!
 'h'   80-8F  fs/hfsplus/ioctl.c
-'i'   00-3F  linux/i2o-dev.h                                         conflict!
-'i'   0B-1F  linux/ipmi.h                                            conflict!
+'i'   00-3F  linux/i2o-dev.h                                           conflict!
+'i'   0B-1F  linux/ipmi.h                                              conflict!
 'i'   80-8F  linux/i8k.h
-'i'   90-9F  `linux/iio/*.h`                                         IIO
+'i'   90-9F  `linux/iio/*.h`                                           IIO
 'j'   00-3F  linux/joystick.h
-'k'   00-0F  linux/spi/spidev.h                                      conflict!
-'k'   00-05  video/kyro.h                                            conflict!
-'k'   10-17  linux/hsi/hsi_char.h                                    HSI character device
-'l'   00-3F  linux/tcfs_fs.h                                         transparent cryptographic file system
-                                                                     <http://web.archive.org/web/%2A/http://mikonos.dia.unisa.it/tcfs>
-'l'   40-7F  linux/udf_fs_i.h                                        in development:
-                                                                     <https://github.com/pali/udftools>
-'m'   00-09  linux/mmtimer.h                                         conflict!
-'m'   all    linux/mtio.h                                            conflict!
-'m'   all    linux/soundcard.h                                       conflict!
-'m'   all    linux/synclink.h                                        conflict!
-'m'   00-19  drivers/message/fusion/mptctl.h                         conflict!
-'m'   00     drivers/scsi/megaraid/megaraid_ioctl.h                  conflict!
+'k'   00-0F  linux/spi/spidev.h                                        conflict!
+'k'   00-05  video/kyro.h                                              conflict!
+'k'   10-17  linux/hsi/hsi_char.h                                      HSI character device
+'l'   00-3F  linux/tcfs_fs.h                                           transparent cryptographic file system
+                                                                       <http://web.archive.org/web/%2A/http://mikonos.dia.unisa.it/tcfs>
+'l'   40-7F  linux/udf_fs_i.h                                          in development:
+                                                                       <https://github.com/pali/udftools>
+'m'   00-09  linux/mmtimer.h                                           conflict!
+'m'   all    linux/mtio.h                                              conflict!
+'m'   all    linux/soundcard.h                                         conflict!
+'m'   all    linux/synclink.h                                          conflict!
+'m'   00-19  drivers/message/fusion/mptctl.h                           conflict!
+'m'   00     drivers/scsi/megaraid/megaraid_ioctl.h                    conflict!
 'n'   00-7F  linux/ncp_fs.h and fs/ncpfs/ioctl.c
-'n'   80-8F  uapi/linux/nilfs2_api.h                                 NILFS2
-'n'   E0-FF  linux/matroxfb.h                                        matroxfb
-'o'   00-1F  fs/ocfs2/ocfs2_fs.h                                     OCFS2
-'o'   00-03  mtd/ubi-user.h                                          conflict! (OCFS2 and UBI overlaps)
-'o'   40-41  mtd/ubi-user.h                                          UBI
-'o'   01-A1  `linux/dvb/*.h`                                         DVB
-'p'   00-0F  linux/phantom.h                                         conflict! (OpenHaptics needs this)
-'p'   00-1F  linux/rtc.h                                             conflict!
+'n'   80-8F  uapi/linux/nilfs2_api.h                                   NILFS2
+'n'   E0-FF  linux/matroxfb.h                                          matroxfb
+'o'   00-1F  fs/ocfs2/ocfs2_fs.h                                       OCFS2
+'o'   00-03  mtd/ubi-user.h                                            conflict! (OCFS2 and UBI overlaps)
+'o'   40-41  mtd/ubi-user.h                                            UBI
+'o'   01-A1  `linux/dvb/*.h`                                           DVB
+'p'   00-0F  linux/phantom.h                                           conflict! (OpenHaptics needs this)
+'p'   00-1F  linux/rtc.h                                               conflict!
 'p'   40-7F  linux/nvram.h
-'p'   80-9F  linux/ppdev.h                                           user-space parport
-                                                                     <mailto:tim@cyberelk.net>
-'p'   A1-A5  linux/pps.h                                             LinuxPPS
-                                                                     <mailto:giometti@linux.it>
+'p'   80-9F  linux/ppdev.h                                             user-space parport
+                                                                       <mailto:tim@cyberelk.net>
+'p'   A1-A5  linux/pps.h                                               LinuxPPS
+                                                                       <mailto:giometti@linux.it>
 'q'   00-1F  linux/serio.h
-'q'   80-FF  linux/telephony.h                                       Internet PhoneJACK, Internet LineJACK
-             