diff --git linux-libre-6.6-gnu/.gitignore linux-libre-6.6.94-gnu/.gitignore
index 0bbae167bf93..d1a8ab3f98aa 100644
--- linux-libre-6.6-gnu/.gitignore
+++ linux-libre-6.6.94-gnu/.gitignore
@@ -135,7 +135,6 @@ GTAGS
 # id-utils files
 ID
 
-*.orig
 *~
 \#*#
 
diff --git linux-libre-6.6-gnu/Documentation/ABI/stable/sysfs-block linux-libre-6.6.94-gnu/Documentation/ABI/stable/sysfs-block
index 1fe9a553c37b..f0025d1c3d5a 100644
--- linux-libre-6.6-gnu/Documentation/ABI/stable/sysfs-block
+++ linux-libre-6.6.94-gnu/Documentation/ABI/stable/sysfs-block
@@ -101,6 +101,16 @@ Description:
 		devices that support receiving integrity metadata.
 
 
+What:		/sys/block/<disk>/partscan
+Date:		May 2024
+Contact:	Christoph Hellwig <hch@lst.de>
+Description:
+		The /sys/block/<disk>/partscan files reports if partition
+		scanning is enabled for the disk.  It returns "1" if partition
+		scanning is enabled, or "0" if not.  The value type is a 32-bit
+		unsigned integer, but only "0" and "1" are valid values.
+
+
 What:		/sys/block/<disk>/<partition>/alignment_offset
 Date:		April 2009
 Contact:	Martin K. Petersen <martin.petersen@oracle.com>
diff --git linux-libre-6.6-gnu/Documentation/ABI/stable/sysfs-driver-dma-idxd linux-libre-6.6.94-gnu/Documentation/ABI/stable/sysfs-driver-dma-idxd
index 825e619250bf..f2ec42949a54 100644
--- linux-libre-6.6-gnu/Documentation/ABI/stable/sysfs-driver-dma-idxd
+++ linux-libre-6.6.94-gnu/Documentation/ABI/stable/sysfs-driver-dma-idxd
@@ -270,6 +270,12 @@ Description:	Shows the operation capability bits displayed in bitmap format
 		correlates to the operations allowed. It's visible only
 		on platforms that support the capability.
 
+What:		/sys/bus/dsa/devices/wq<m>.<n>/driver_name
+Date:		Sept 8, 2023
+KernelVersion:	6.7.0
+Contact:	dmaengine@vger.kernel.org
+Description:	Name of driver to be bounded to the wq.
+
 What:           /sys/bus/dsa/devices/engine<m>.<n>/group_id
 Date:           Oct 25, 2019
 KernelVersion:  5.6.0
diff --git linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-bus-iio-filter-admv8818 linux-libre-6.6.94-gnu/Documentation/ABI/testing/sysfs-bus-iio-filter-admv8818
index 31dbb390573f..c431f0a13cf5 100644
--- linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-bus-iio-filter-admv8818
+++ linux-libre-6.6.94-gnu/Documentation/ABI/testing/sysfs-bus-iio-filter-admv8818
@@ -3,7 +3,7 @@ KernelVersion:
 Contact:	linux-iio@vger.kernel.org
 Description:
 		Reading this returns the valid values that can be written to the
-		on_altvoltage0_mode attribute:
+		filter_mode attribute:
 
 		- auto -> Adjust bandpass filter to track changes in input clock rate.
 		- manual -> disable/unregister the clock rate notifier / input clock tracking.
diff --git linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-bus-optee-devices linux-libre-6.6.94-gnu/Documentation/ABI/testing/sysfs-bus-optee-devices
index 0f58701367b6..af31e5a22d89 100644
--- linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-bus-optee-devices
+++ linux-libre-6.6.94-gnu/Documentation/ABI/testing/sysfs-bus-optee-devices
@@ -6,3 +6,12 @@ Description:
 		OP-TEE bus provides reference to registered drivers under this directory. The <uuid>
 		matches Trusted Application (TA) driver and corresponding TA in secure OS. Drivers
 		are free to create needed API under optee-ta-<uuid> directory.
+
+What:		/sys/bus/tee/devices/optee-ta-<uuid>/need_supplicant
+Date:		November 2023
+KernelVersion:	6.7
+Contact:	op-tee@lists.trustedfirmware.org
+Description:
+		Allows to distinguish whether an OP-TEE based TA/device requires user-space
+		tee-supplicant to function properly or not. This attribute will be present for
+		devices which depend on tee-supplicant to be running.
diff --git linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-bus-pci linux-libre-6.6.94-gnu/Documentation/ABI/testing/sysfs-bus-pci
index ecf47559f495..7f3e6bc3ff0f 100644
--- linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-bus-pci
+++ linux-libre-6.6.94-gnu/Documentation/ABI/testing/sysfs-bus-pci
@@ -163,6 +163,17 @@ Description:
 		will be present in sysfs.  Writing 1 to this file
 		will perform reset.
 
+What:		/sys/bus/pci/devices/.../reset_subordinate
+Date:		October 2024
+Contact:	linux-pci@vger.kernel.org
+Description:
+		This is visible only for bridge devices. If you want to reset
+		all devices attached through the subordinate bus of a specific
+		bridge device, writing 1 to this will try to do it.  This will
+		affect all devices attached to the system through this bridge
+		similiar to writing 1 to their individual "reset" file, so use
+		with caution.
+
 What:		/sys/bus/pci/devices/.../vpd
 Date:		February 2008
 Contact:	Ben Hutchings <bwh@kernel.org>
diff --git linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-class-devfreq linux-libre-6.6.94-gnu/Documentation/ABI/testing/sysfs-class-devfreq
index 5e6b74f30406..1e7e0bb4c14e 100644
--- linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-class-devfreq
+++ linux-libre-6.6.94-gnu/Documentation/ABI/testing/sysfs-class-devfreq
@@ -52,6 +52,9 @@ Description:
 
 			echo 0 > /sys/class/devfreq/.../trans_stat
 
+		If the transition table is bigger than PAGE_SIZE, reading
+		this will return an -EFBIG error.
+
 What:		/sys/class/devfreq/.../available_frequencies
 Date:		October 2012
 Contact:	Nishanth Menon <nm@ti.com>
diff --git linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-class-led linux-libre-6.6.94-gnu/Documentation/ABI/testing/sysfs-class-led
index b2ff0012c0f2..2e24ac3bd7ef 100644
--- linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-class-led
+++ linux-libre-6.6.94-gnu/Documentation/ABI/testing/sysfs-class-led
@@ -59,15 +59,6 @@ Description:
 		brightness. Reading this file when no hw brightness change
 		event has happened will return an ENODATA error.
 
-What:		/sys/class/leds/<led>/color
-Date:		June 2023
-KernelVersion:	6.5
-Description:
-		Color of the LED.
-
-		This is a read-only file. Reading this file returns the color
-		of the LED as a string (e.g: "red", "green", "multicolor").
-
 What:		/sys/class/leds/<led>/trigger
 Date:		March 2006
 KernelVersion:	2.6.17
diff --git linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-class-net-queues linux-libre-6.6.94-gnu/Documentation/ABI/testing/sysfs-class-net-queues
index 906ff3ca928a..5bff64d256c2 100644
--- linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-class-net-queues
+++ linux-libre-6.6.94-gnu/Documentation/ABI/testing/sysfs-class-net-queues
@@ -1,4 +1,4 @@
-What:		/sys/class/<iface>/queues/rx-<queue>/rps_cpus
+What:		/sys/class/net/<iface>/queues/rx-<queue>/rps_cpus
 Date:		March 2010
 KernelVersion:	2.6.35
 Contact:	netdev@vger.kernel.org
@@ -8,7 +8,7 @@ Description:
 		network device queue. Possible values depend on the number
 		of available CPU(s) in the system.
 
-What:		/sys/class/<iface>/queues/rx-<queue>/rps_flow_cnt
+What:		/sys/class/net/<iface>/queues/rx-<queue>/rps_flow_cnt
 Date:		April 2010
 KernelVersion:	2.6.35
 Contact:	netdev@vger.kernel.org
@@ -16,7 +16,7 @@ Description:
 		Number of Receive Packet Steering flows being currently
 		processed by this particular network device receive queue.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/tx_timeout
+What:		/sys/class/net/<iface>/queues/tx-<queue>/tx_timeout
 Date:		November 2011
 KernelVersion:	3.3
 Contact:	netdev@vger.kernel.org
@@ -24,7 +24,7 @@ Description:
 		Indicates the number of transmit timeout events seen by this
 		network interface transmit queue.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/tx_maxrate
+What:		/sys/class/net/<iface>/queues/tx-<queue>/tx_maxrate
 Date:		March 2015
 KernelVersion:	4.1
 Contact:	netdev@vger.kernel.org
@@ -32,7 +32,7 @@ Description:
 		A Mbps max-rate set for the queue, a value of zero means disabled,
 		default is disabled.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/xps_cpus
+What:		/sys/class/net/<iface>/queues/tx-<queue>/xps_cpus
 Date:		November 2010
 KernelVersion:	2.6.38
 Contact:	netdev@vger.kernel.org
@@ -42,7 +42,7 @@ Description:
 		network device transmit queue. Possible values depend on the
 		number of available CPU(s) in the system.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/xps_rxqs
+What:		/sys/class/net/<iface>/queues/tx-<queue>/xps_rxqs
 Date:		June 2018
 KernelVersion:	4.18.0
 Contact:	netdev@vger.kernel.org
@@ -53,7 +53,7 @@ Description:
 		number of available receive queue(s) in the network device.
 		Default is disabled.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/hold_time
+What:		/sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/hold_time
 Date:		November 2011
 KernelVersion:	3.3
 Contact:	netdev@vger.kernel.org
@@ -62,7 +62,7 @@ Description:
 		of this particular network device transmit queue.
 		Default value is 1000.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/inflight
+What:		/sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/inflight
 Date:		November 2011
 KernelVersion:	3.3
 Contact:	netdev@vger.kernel.org
@@ -70,7 +70,7 @@ Description:
 		Indicates the number of bytes (objects) in flight on this
 		network device transmit queue.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/limit
+What:		/sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/limit
 Date:		November 2011
 KernelVersion:	3.3
 Contact:	netdev@vger.kernel.org
@@ -79,7 +79,7 @@ Description:
 		on this network device transmit queue. This value is clamped
 		to be within the bounds defined by limit_max and limit_min.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/limit_max
+What:		/sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/limit_max
 Date:		November 2011
 KernelVersion:	3.3
 Contact:	netdev@vger.kernel.org
@@ -88,7 +88,7 @@ Description:
 		queued on this network device transmit queue. See
 		include/linux/dynamic_queue_limits.h for the default value.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/limit_min
+What:		/sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/limit_min
 Date:		November 2011
 KernelVersion:	3.3
 Contact:	netdev@vger.kernel.org
diff --git linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-class-net-statistics linux-libre-6.6.94-gnu/Documentation/ABI/testing/sysfs-class-net-statistics
index 55db27815361..53e508c6936a 100644
--- linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-class-net-statistics
+++ linux-libre-6.6.94-gnu/Documentation/ABI/testing/sysfs-class-net-statistics
@@ -1,4 +1,4 @@
-What:		/sys/class/<iface>/statistics/collisions
+What:		/sys/class/net/<iface>/statistics/collisions
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -6,7 +6,7 @@ Description:
 		Indicates the number of collisions seen by this network device.
 		This value might not be relevant with all MAC layers.
 
-What:		/sys/class/<iface>/statistics/multicast
+What:		/sys/class/net/<iface>/statistics/multicast
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -14,7 +14,7 @@ Description:
 		Indicates the number of multicast packets received by this
 		network device.
 
-What:		/sys/class/<iface>/statistics/rx_bytes
+What:		/sys/class/net/<iface>/statistics/rx_bytes
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -23,7 +23,7 @@ Description:
 		See the network driver for the exact meaning of when this
 		value is incremented.
 
-What:		/sys/class/<iface>/statistics/rx_compressed
+What:		/sys/class/net/<iface>/statistics/rx_compressed
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -32,7 +32,7 @@ Description:
 		network device. This value might only be relevant for interfaces
 		that support packet compression (e.g: PPP).
 
-What:		/sys/class/<iface>/statistics/rx_crc_errors
+What:		/sys/class/net/<iface>/statistics/rx_crc_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -41,7 +41,7 @@ Description:
 		by this network device. Note that the specific meaning might
 		depend on the MAC layer used by the interface.
 
-What:		/sys/class/<iface>/statistics/rx_dropped
+What:		/sys/class/net/<iface>/statistics/rx_dropped
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -51,7 +51,7 @@ Description:
 		packet processing. See the network driver for the exact
 		meaning of this value.
 
-What:		/sys/class/<iface>/statistics/rx_errors
+What:		/sys/class/net/<iface>/statistics/rx_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -59,7 +59,7 @@ Description:
 		Indicates the number of receive errors on this network device.
 		See the network driver for the exact meaning of this value.
 
-What:		/sys/class/<iface>/statistics/rx_fifo_errors
+What:		/sys/class/net/<iface>/statistics/rx_fifo_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -68,7 +68,7 @@ Description:
 		network device. See the network driver for the exact
 		meaning of this value.
 
-What:		/sys/class/<iface>/statistics/rx_frame_errors
+What:		/sys/class/net/<iface>/statistics/rx_frame_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -78,7 +78,7 @@ Description:
 		on the MAC layer protocol used. See the network driver for
 		the exact meaning of this value.
 
-What:		/sys/class/<iface>/statistics/rx_length_errors
+What:		/sys/class/net/<iface>/statistics/rx_length_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -87,7 +87,7 @@ Description:
 		error, oversized or undersized. See the network driver for the
 		exact meaning of this value.
 
-What:		/sys/class/<iface>/statistics/rx_missed_errors
+What:		/sys/class/net/<iface>/statistics/rx_missed_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -96,7 +96,7 @@ Description:
 		due to lack of capacity in the receive side. See the network
 		driver for the exact meaning of this value.
 
-What:		/sys/class/<iface>/statistics/rx_nohandler
+What:		/sys/class/net/<iface>/statistics/rx_nohandler
 Date:		February 2016
 KernelVersion:	4.6
 Contact:	netdev@vger.kernel.org
@@ -104,7 +104,7 @@ Description:
 		Indicates the number of received packets that were dropped on
 		an inactive device by the network core.
 
-What:		/sys/class/<iface>/statistics/rx_over_errors
+What:		/sys/class/net/<iface>/statistics/rx_over_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -114,7 +114,7 @@ Description:
 		(e.g: larger than MTU). See the network driver for the exact
 		meaning of this value.
 
-What:		/sys/class/<iface>/statistics/rx_packets
+What:		/sys/class/net/<iface>/statistics/rx_packets
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -122,7 +122,7 @@ Description:
 		Indicates the total number of good packets received by this
 		network device.
 
-What:		/sys/class/<iface>/statistics/tx_aborted_errors
+What:		/sys/class/net/<iface>/statistics/tx_aborted_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -132,7 +132,7 @@ Description:
 		a medium collision). See the network driver for the exact
 		meaning of this value.
 
-What:		/sys/class/<iface>/statistics/tx_bytes
+What:		/sys/class/net/<iface>/statistics/tx_bytes
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -143,7 +143,7 @@ Description:
 		transmitted packets or all packets that have been queued for
 		transmission.
 
-What:		/sys/class/<iface>/statistics/tx_carrier_errors
+What:		/sys/class/net/<iface>/statistics/tx_carrier_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -152,7 +152,7 @@ Description:
 		because of carrier errors (e.g: physical link down). See the
 		network driver for the exact meaning of this value.
 
-What:		/sys/class/<iface>/statistics/tx_compressed
+What:		/sys/class/net/<iface>/statistics/tx_compressed
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -161,7 +161,7 @@ Description:
 		this might only be relevant for devices that support
 		compression (e.g: PPP).
 
-What:		/sys/class/<iface>/statistics/tx_dropped
+What:		/sys/class/net/<iface>/statistics/tx_dropped
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -170,7 +170,7 @@ Description:
 		See the driver for the exact reasons as to why the packets were
 		dropped.
 
-What:		/sys/class/<iface>/statistics/tx_errors
+What:		/sys/class/net/<iface>/statistics/tx_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -179,7 +179,7 @@ Description:
 		a network device. See the driver for the exact reasons as to
 		why the packets were dropped.
 
-What:		/sys/class/<iface>/statistics/tx_fifo_errors
+What:		/sys/class/net/<iface>/statistics/tx_fifo_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -188,7 +188,7 @@ Description:
 		FIFO error. See the driver for the exact reasons as to why the
 		packets were dropped.
 
-What:		/sys/class/<iface>/statistics/tx_heartbeat_errors
+What:		/sys/class/net/<iface>/statistics/tx_heartbeat_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -197,7 +197,7 @@ Description:
 		reported as heartbeat errors. See the driver for the exact
 		reasons as to why the packets were dropped.
 
-What:		/sys/class/<iface>/statistics/tx_packets
+What:		/sys/class/net/<iface>/statistics/tx_packets
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
@@ -206,7 +206,7 @@ Description:
 		device. See the driver for whether this reports the number of all
 		attempted or successful transmissions.
 
-What:		/sys/class/<iface>/statistics/tx_window_errors
+What:		/sys/class/net/<iface>/statistics/tx_window_errors
 Date:		April 2005
 KernelVersion:	2.6.12
 Contact:	netdev@vger.kernel.org
diff --git linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-devices-system-cpu linux-libre-6.6.94-gnu/Documentation/ABI/testing/sysfs-devices-system-cpu
index 7ecd5c8161a6..0426ec112155 100644
--- linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-devices-system-cpu
+++ linux-libre-6.6.94-gnu/Documentation/ABI/testing/sysfs-devices-system-cpu
@@ -514,11 +514,13 @@ Description:	information about CPUs heterogeneity.
 
 What:		/sys/devices/system/cpu/vulnerabilities
 		/sys/devices/system/cpu/vulnerabilities/gather_data_sampling
+		/sys/devices/system/cpu/vulnerabilities/indirect_target_selection
 		/sys/devices/system/cpu/vulnerabilities/itlb_multihit
 		/sys/devices/system/cpu/vulnerabilities/l1tf
 		/sys/devices/system/cpu/vulnerabilities/mds
 		/sys/devices/system/cpu/vulnerabilities/meltdown
 		/sys/devices/system/cpu/vulnerabilities/mmio_stale_data
+		/sys/devices/system/cpu/vulnerabilities/reg_file_data_sampling
 		/sys/devices/system/cpu/vulnerabilities/retbleed
 		/sys/devices/system/cpu/vulnerabilities/spec_store_bypass
 		/sys/devices/system/cpu/vulnerabilities/spectre_v1
@@ -564,7 +566,8 @@ Description:	Control Symmetric Multi Threading (SMT)
 			 ================ =========================================
 
 			 If control status is "forceoff" or "notsupported" writes
-			 are rejected.
+			 are rejected. Note that enabling SMT on PowerPC skips
+			 offline cores.
 
 What:		/sys/devices/system/cpu/cpuX/power/energy_perf_bias
 Date:		March 2019
diff --git linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-driver-qat linux-libre-6.6.94-gnu/Documentation/ABI/testing/sysfs-driver-qat
index ef6d6c57105e..96834d103a09 100644
--- linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-driver-qat
+++ linux-libre-6.6.94-gnu/Documentation/ABI/testing/sysfs-driver-qat
@@ -29,6 +29,8 @@ Description:	(RW) Reports the current configuration of the QAT device.
 		  services
 		* asym;sym: identical to sym;asym
 		* dc: the device is configured for running compression services
+		* dcc: identical to dc but enables the dc chaining feature,
+		  hash then compression. If this is not required chose dc
 		* sym: the device is configured for running symmetric crypto
 		  services
 		* asym: the device is configured for running asymmetric crypto
diff --git linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-fs-f2fs linux-libre-6.6.94-gnu/Documentation/ABI/testing/sysfs-fs-f2fs
index 36c3cb547901..33675e718a37 100644
--- linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-fs-f2fs
+++ linux-libre-6.6.94-gnu/Documentation/ABI/testing/sysfs-fs-f2fs
@@ -311,10 +311,13 @@ Description:	Do background GC aggressively when set. Set to 0 by default.
 		GC approach and turns SSR mode on.
 		gc urgent low(2): lowers the bar of checking I/O idling in
 		order to process outstanding discard commands and GC a
-		little bit aggressively. uses cost benefit GC approach.
+		little bit aggressively. always uses cost benefit GC approach,
+		and will override age-threshold GC approach if ATGC is enabled
+		at the same time.
 		gc urgent mid(3): does GC forcibly in a period of given
 		gc_urgent_sleep_time and executes a mid level of I/O idling check.
-		uses cost benefit GC approach.
+		always uses cost benefit GC approach, and will override
+		age-threshold GC approach if ATGC is enabled at the same time.
 
 What:		/sys/fs/f2fs/<disk>/gc_urgent_sleep_time
 Date:		August 2017
diff --git linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-fs-xfs linux-libre-6.6.94-gnu/Documentation/ABI/testing/sysfs-fs-xfs
index f704925f6fe9..82d8e2f79834 100644
--- linux-libre-6.6-gnu/Documentation/ABI/testing/sysfs-fs-xfs
+++ linux-libre-6.6.94-gnu/Documentation/ABI/testing/sysfs-fs-xfs
@@ -1,7 +1,7 @@
 What:		/sys/fs/xfs/<disk>/log/log_head_lsn
 Date:		July 2014
 KernelVersion:	3.17
-Contact:	xfs@oss.sgi.com
+Contact:	linux-xfs@vger.kernel.org
 Description:
 		The log sequence number (LSN) of the current head of the
 		log. The LSN is exported in "cycle:basic block" format.
@@ -10,7 +10,7 @@ Users:		xfstests
 What:		/sys/fs/xfs/<disk>/log/log_tail_lsn
 Date:		July 2014
 KernelVersion:	3.17
-Contact:	xfs@oss.sgi.com
+Contact:	linux-xfs@vger.kernel.org
 Description:
 		The log sequence number (LSN) of the current tail of the
 		log. The LSN is exported in "cycle:basic block" format.
@@ -18,7 +18,7 @@ Description:
 What:		/sys/fs/xfs/<disk>/log/reserve_grant_head
 Date:		July 2014
 KernelVersion:	3.17
-Contact:	xfs@oss.sgi.com
+Contact:	linux-xfs@vger.kernel.org
 Description:
 		The current state of the log reserve grant head. It
 		represents the total log reservation of all currently
@@ -29,7 +29,7 @@ Users:		xfstests
 What:		/sys/fs/xfs/<disk>/log/write_grant_head
 Date:		July 2014
 KernelVersion:	3.17
-Contact:	xfs@oss.sgi.com
+Contact:	linux-xfs@vger.kernel.org
 Description:
 		The current state of the log write grant head. It
 		represents the total log reservation of all currently
diff --git linux-libre-6.6-gnu/Documentation/RCU/stallwarn.rst linux-libre-6.6.94-gnu/Documentation/RCU/stallwarn.rst
index ca7b7cd806a1..30080ff6f406 100644
--- linux-libre-6.6-gnu/Documentation/RCU/stallwarn.rst
+++ linux-libre-6.6.94-gnu/Documentation/RCU/stallwarn.rst
@@ -249,7 +249,7 @@ ticks this GP)" indicates that this CPU has not taken any scheduling-clock
 interrupts during the current stalled grace period.
 
 The "idle=" portion of the message prints the dyntick-idle state.
-The hex number before the first "/" is the low-order 12 bits of the
+The hex number before the first "/" is the low-order 16 bits of the
 dynticks counter, which will have an even-numbered value if the CPU
 is in dyntick-idle mode and an odd-numbered value otherwise.  The hex
 number between the two "/"s is the value of the nesting, which will be
diff --git linux-libre-6.6-gnu/Documentation/admin-guide/abi-obsolete.rst linux-libre-6.6.94-gnu/Documentation/admin-guide/abi-obsolete.rst
index d095867899c5..594e697aa1b2 100644
--- linux-libre-6.6-gnu/Documentation/admin-guide/abi-obsolete.rst
+++ linux-libre-6.6.94-gnu/Documentation/admin-guide/abi-obsolete.rst
@@ -7,5 +7,5 @@ marked to be removed at some later point in time.
 The description of the interface will document the reason why it is
 obsolete and when it can be expected to be removed.
 
-.. kernel-abi:: $srctree/Documentation/ABI/obsolete
+.. kernel-abi:: ABI/obsolete
    :rst:
diff --git linux-libre-6.6-gnu/Documentation/admin-guide/abi-removed.rst linux-libre-6.6.94-gnu/Documentation/admin-guide/abi-removed.rst
index f7e9e43023c1..f9e000c81828 100644
--- linux-libre-6.6-gnu/Documentation/admin-guide/abi-removed.rst
+++ linux-libre-6.6.94-gnu/Documentation/admin-guide/abi-removed.rst
@@ -1,5 +1,5 @@
 ABI removed symbols
 ===================
 
-.. kernel-abi:: $srctree/Documentation/ABI/removed
+.. kernel-abi:: ABI/removed
    :rst:
diff --git linux-libre-6.6-gnu/Documentation/admin-guide/abi-stable.rst linux-libre-6.6.94-gnu/Documentation/admin-guide/abi-stable.rst
index 70490736e0d3..fc3361d847b1 100644
--- linux-libre-6.6-gnu/Documentation/admin-guide/abi-stable.rst
+++ linux-libre-6.6.94-gnu/Documentation/admin-guide/abi-stable.rst
@@ -10,5 +10,5 @@ for at least 2 years.
 Most interfaces (like syscalls) are expected to never change and always
 be available.
 
-.. kernel-abi:: $srctree/Documentation/ABI/stable
+.. kernel-abi:: ABI/stable
    :rst:
diff --git linux-libre-6.6-gnu/Documentation/admin-guide/abi-testing.rst linux-libre-6.6.94-gnu/Documentation/admin-guide/abi-testing.rst
index b205b16a72d0..19767926b344 100644
--- linux-libre-6.6-gnu/Documentation/admin-guide/abi-testing.rst
+++ linux-libre-6.6.94-gnu/Documentation/admin-guide/abi-testing.rst
@@ -16,5 +16,5 @@ Programs that use these interfaces are strongly encouraged to add their
 name to the description of these interfaces, so that the kernel
 developers can easily notify them if any changes occur.
 
-.. kernel-abi:: $srctree/Documentation/ABI/testing
+.. kernel-abi:: ABI/testing
    :rst:
diff --git linux-libre-6.6-gnu/Documentation/admin-guide/blockdev/zram.rst linux-libre-6.6.94-gnu/Documentation/admin-guide/blockdev/zram.rst
index e4551579cb12..ee2b0030d416 100644
--- linux-libre-6.6-gnu/Documentation/admin-guide/blockdev/zram.rst
+++ linux-libre-6.6.94-gnu/Documentation/admin-guide/blockdev/zram.rst
@@ -328,7 +328,7 @@ as idle::
 From now on, any pages on zram are idle pages. The idle mark
 will be removed until someone requests access of the block.
 IOW, unless there is access request, those pages are still idle pages.
-Additionally, when CONFIG_ZRAM_MEMORY_TRACKING is enabled pages can be
+Additionally, when CONFIG_ZRAM_TRACK_ENTRY_ACTIME is enabled pages can be
 marked as idle based on how long (in seconds) it's been since they were
 last accessed::
 
diff --git linux-libre-6.6-gnu/Documentation/admin-guide/cifs/usage.rst linux-libre-6.6.94-gnu/Documentation/admin-guide/cifs/usage.rst
index 5f936b4b6018..3de599cf0779 100644
--- linux-libre-6.6-gnu/Documentation/admin-guide/cifs/usage.rst
+++ linux-libre-6.6.94-gnu/Documentation/admin-guide/cifs/usage.rst
@@ -722,40 +722,26 @@ Configuration pseudo-files:
 ======================= =======================================================
 SecurityFlags		Flags which control security negotiation and
 			also packet signing. Authentication (may/must)
-			flags (e.g. for NTLM and/or NTLMv2) may be combined with
+			flags (e.g. for NTLMv2) may be combined with
 			the signing flags.  Specifying two different password
 			hashing mechanisms (as "must use") on the other hand
 			does not make much sense. Default flags are::
 
-				0x07007
-
-			(NTLM, NTLMv2 and packet signing allowed).  The maximum
-			allowable flags if you want to allow mounts to servers
-			using weaker password hashes is 0x37037 (lanman,
-			plaintext, ntlm, ntlmv2, signing allowed).  Some
-			SecurityFlags require the corresponding menuconfig
-			options to be enabled.  Enabling plaintext
-			authentication currently requires also enabling
-			lanman authentication in the security flags
-			because the cifs module only supports sending
-			laintext passwords using the older lanman dialect
-			form of the session setup SMB.  (e.g. for authentication
-			using plain text passwords, set the SecurityFlags
-			to 0x30030)::
+				0x00C5
+
+			(NTLMv2 and packet signing allowed).  Some SecurityFlags
+			may require enabling a corresponding menuconfig option.
 
 			  may use packet signing			0x00001
 			  must use packet signing			0x01001
-			  may use NTLM (most common password hash)	0x00002
-			  must use NTLM					0x02002
 			  may use NTLMv2				0x00004
 			  must use NTLMv2				0x04004
-			  may use Kerberos security			0x00008
-			  must use Kerberos				0x08008
-			  may use lanman (weak) password hash		0x00010
-			  must use lanman password hash			0x10010
-			  may use plaintext passwords			0x00020
-			  must use plaintext passwords			0x20020
-			  (reserved for future packet encryption)	0x00040
+			  may use Kerberos security (krb5)		0x00008
+			  must use Kerberos                             0x08008
+			  may use NTLMSSP               		0x00080
+			  must use NTLMSSP           			0x80080
+			  seal (packet encryption)			0x00040
+			  must seal                                     0x40040
 
 cifsFYI			If set to non-zero value, additional debug information
 			will be logged to the system error log.  This field
diff --git linux-libre-6.6-gnu/Documentation/admin-guide/features.rst linux-libre-6.6.94-gnu/Documentation/admin-guide/features.rst
index 8c167082a84f..7651eca38227 100644
--- linux-libre-6.6-gnu/Documentation/admin-guide/features.rst
+++ linux-libre-6.6.94-gnu/Documentation/admin-guide/features.rst
@@ -1,3 +1,3 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-.. kernel-feat:: $srctree/Documentation/features
+.. kernel-feat:: features
diff --git linux-libre-6.6-gnu/Documentation/admin-guide/hw-vuln/core-scheduling.rst linux-libre-6.6.94-gnu/Documentation/admin-guide/hw-vuln/core-scheduling.rst
index cf1eeefdfc32..a92e10ec402e 100644
--- linux-libre-6.6-gnu/Documentation/admin-guide/hw-vuln/core-scheduling.rst
+++ linux-libre-6.6.94-gnu/Documentation/admin-guide/hw-vuln/core-scheduling.rst
@@ -67,8 +67,8 @@ arg4:
     will be performed for all tasks in the task group of ``pid``.
 
 arg5:
-    userspace pointer to an unsigned long for storing the cookie returned by
-    ``PR_SCHED_CORE_GET`` command. Should be 0 for all other commands.
+    userspace pointer to an unsigned long long for storing the cookie returned
+    by ``PR_SCHED_CORE_GET`` command. Should be 0 for all other commands.
 
 In order for a process to push a cookie to, or pull a cookie from a process, it
 is required to have the ptrace access mode: `PTRACE_MODE_READ_REALCREDS` to the
diff --git linux-libre-6.6-gnu/Documentation/admin-guide/hw-vuln/index.rst linux-libre-6.6.94-gnu/Documentation/admin-guide/hw-vuln/index.rst
index de99caabf65a..d2caa390395e 100644
--- linux-libre-6.6-gnu/Documentation/admin-guide/hw-vuln/index.rst
+++ linux-libre-6.6.94-gnu/Documentation/admin-guide/hw-vuln/index.rst
@@ -21,3 +21,5 @@ are configurable at compile, boot or run time.
    cross-thread-rsb
    srso
    gather_data_sampling
+   reg-file-data-sampling
+   indirect-target-selection
diff --git linux-libre-6.6-gnu/Documentation/admin-guide/hw-vuln/indirect-target-selection.rst linux-libre-6.6.94-gnu/Documentation/admin-guide/hw-vuln/indirect-target-selection.rst
new file mode 100644
index 000000000000..52fed64bfb78
--- /dev/null
+++ linux-libre-6.6.94-gnu/Documentation/admin-guide/hw-vuln/indirect-target-selection.rst
@@ -0,0 +1,166 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Indirect Target Selection (ITS)
+===============================
+
+ITS is a vulnerability in some Intel CPUs that support Enhanced IBRS and were
+released before Alder Lake. ITS may allow an attacker to control the prediction
+of indirect branches and RETs located in the lower half of a cacheline.
+
+ITS is assigned CVE-2024-28956 with a CVSS score of 4.7 (Medium).
+
+Scope of Impact
+---------------
+- **eIBRS Guest/Host Isolation**: Indirect branches in KVM/kernel may still be
+  predicted with unintended target corresponding to a branch in the guest.
+
+- **Intra-Mode BTI**: In-kernel training such as through cBPF or other native
+  gadgets.
+
+- **Indirect Branch Prediction Barrier (IBPB)**: After an IBPB, indirect
+  branches may still be predicted with targets corresponding to direct branches
+  executed prior to the IBPB. /*(DEBLOBBED)*/
+
+Affected CPUs
+-------------
+Below is the list of ITS affected CPUs [#f2]_ [#f3]_:
+
+   ========================  ============  ====================  ===============
+   Common name               Family_Model  eIBRS                 Intra-mode BTI
+                                           Guest/Host Isolation
+   ========================  ============  ====================  ===============
+   SKYLAKE_X (step >= 6)     06_55H        Affected              Affected
+   ICELAKE_X                 06_6AH        Not affected          Affected
+   ICELAKE_D                 06_6CH        Not affected          Affected
+   ICELAKE_L                 06_7EH        Not affected          Affected
+   TIGERLAKE_L               06_8CH        Not affected          Affected
+   TIGERLAKE                 06_8DH        Not affected          Affected
+   KABYLAKE_L (step >= 12)   06_8EH        Affected              Affected
+   KABYLAKE (step >= 13)     06_9EH        Affected              Affected
+   COMETLAKE                 06_A5H        Affected              Affected
+   COMETLAKE_L               06_A6H        Affected              Affected
+   ROCKETLAKE                06_A7H        Not affected          Affected
+   ========================  ============  ====================  ===============
+
+- All affected CPUs enumerate Enhanced IBRS feature.
+- IBPB isolation is affected on all ITS affected CPUs, and need a microcode
+  update for mitigation.
+- None of the affected CPUs enumerate BHI_CTRL which was introduced in Golden
+  Cove (Alder Lake and Sapphire Rapids). This can help guests to determine the
+  host's affected status.
+- Intel Atom CPUs are not affected by ITS.
+
+Mitigation
+----------
+As only the indirect branches and RETs that have their last byte of instruction
+in the lower half of the cacheline are vulnerable to ITS, the basic idea behind
+the mitigation is to not allow indirect branches in the lower half.
+
+This is achieved by relying on existing retpoline support in the kernel, and in
+compilers. ITS-vulnerable retpoline sites are runtime patched to point to newly
+added ITS-safe thunks. These safe thunks consists of indirect branch in the
+second half of the cacheline. Not all retpoline sites are patched to thunks, if
+a retpoline site is evaluated to be ITS-safe, it is replaced with an inline
+indirect branch.
+
+Dynamic thunks
+~~~~~~~~~~~~~~
+From a dynamically allocated pool of safe-thunks, each vulnerable site is
+replaced with a new thunk, such that they get a unique address. This could
+improve the branch prediction accuracy. Also, it is a defense-in-depth measure
+against aliasing.
+
+Note, for simplicity, indirect branches in eBPF programs are always replaced
+with a jump to a static thunk in __x86_indirect_its_thunk_array. If required,
+in future this can be changed to use dynamic thunks.
+
+All vulnerable RETs are replaced with a static thunk, they do not use dynamic
+thunks. This is because RETs get their prediction from RSB mostly that does not
+depend on source address. RETs that underflow RSB may benefit from dynamic
+thunks. But, RETs significantly outnumber indirect branches, and any benefit
+from a unique source address could be outweighed by the increased icache
+footprint and iTLB pressure.
+
+Retpoline
+~~~~~~~~~
+Retpoline sequence also mitigates ITS-unsafe indirect branches. For this
+reason, when retpoline is enabled, ITS mitigation only relocates the RETs to
+safe thunks. Unless user requested the RSB-stuffing mitigation.
+
+RSB Stuffing
+~~~~~~~~~~~~
+RSB-stuffing via Call Depth Tracking is a mitigation for Retbleed RSB-underflow
+attacks. And it also mitigates RETs that are vulnerable to ITS.
+
+Mitigation in guests
+^^^^^^^^^^^^^^^^^^^^
+All guests deploy ITS mitigation by default, irrespective of eIBRS enumeration
+and Family/Model of the guest. This is because eIBRS feature could be hidden
+from a guest. One exception to this is when a guest enumerates BHI_DIS_S, which
+indicates that the guest is running on an unaffected host.
+
+To prevent guests from unnecessarily deploying the mitigation on unaffected
+platforms, Intel has defined ITS_NO bit(62) in MSR IA32_ARCH_CAPABILITIES. When
+a guest sees this bit set, it should not enumerate the ITS bug. Note, this bit
+is not set by any hardware, but is **intended for VMMs to synthesize** it for
+guests as per the host's affected status.
+
+Mitigation options
+^^^^^^^^^^^^^^^^^^
+The ITS mitigation can be controlled using the "indirect_target_selection"
+kernel parameter. The available options are:
+
+   ======== ===================================================================
+   on       (default)  Deploy the "Aligned branch/return thunks" mitigation.
+	    If spectre_v2 mitigation enables retpoline, aligned-thunks are only
+	    deployed for the affected RET instructions. Retpoline mitigates
+	    indirect branches.
+
+   off      Disable ITS mitigation.
+
+   vmexit   Equivalent to "=on" if the CPU is affected by guest/host isolation
+	    part of ITS. Otherwise, mitigation is not deployed. This option is
+	    useful when host userspace is not in the threat model, and only
+	    attacks from guest to host are considered.
+
+   stuff    Deploy RSB-fill mitigation when retpoline is also deployed.
+	    Otherwise, deploy the default mitigation. When retpoline mitigation
+	    is enabled, RSB-stuffing via Call-Depth-Tracking also mitigates
+	    ITS.
+
+   force    Force the ITS bug and deploy the default mitigation.
+   ======== ===================================================================
+
+Sysfs reporting
+---------------
+
+The sysfs file showing ITS mitigation status is:
+
+  /sys/devices/system/cpu/vulnerabilities/indirect_target_selection
+
+Note, microcode mitigation status is not reported in this file.
+
+The possible values in this file are:
+
+.. list-table::
+
+   * - Not affected
+     - The processor is not vulnerable.
+   * - Vulnerable
+     - System is vulnerable and no mitigation has been applied.
+   * - Vulnerable, KVM: Not affected
+     - System is vulnerable to intra-mode BTI, but not affected by eIBRS
+       guest/host isolation.
+   * - Mitigation: Aligned branch/return thunks
+     - The mitigation is enabled, affected indirect branches and RETs are
+       relocated to safe thunks.
+   * - Mitigation: Retpolines, Stuffing RSB
+     - The mitigation is enabled using retpoline and RSB stuffing.
+
+References
+----------
+.. [#f1] /*(DEBLOBBED)*/
+
+.. [#f2] Affected Processors list - https://www.intel.com/content/www/us/en/developer/topic-technology/software-security-guidance/processors-affected-consolidated-product-cpu-model.html
+
+.. [#f3] Affected Processors list (machine readable) - https://github.com/intel/Intel-affected-processor-list
diff --git linux-libre-6.6-gnu/Documentation/admin-guide/hw-vuln/reg-file-data-sampling.rst linux-libre-6.6.94-gnu/Documentation/admin-guide/hw-vuln/reg-file-data-sampling.rst
new file mode 100644
index 000000000000..0585d02b9a6c
--- /dev/null
+++ linux-libre-6.6.94-gnu/Documentation/admin-guide/hw-vuln/reg-file-data-sampling.rst
@@ -0,0 +1,104 @@
+==================================
+Register File Data Sampling (RFDS)
+==================================
+
+Register File Data Sampling (RFDS) is a microarchitectural vulnerability that
+only affects Intel Atom parts(also branded as E-cores). RFDS may allow
+a malicious actor to infer data values previously used in floating point
+registers, vector registers, or integer registers. RFDS does not provide the
+ability to choose which data is inferred. CVE-2023-28746 is assigned to RFDS.
+
+Affected Processors
+===================
+Below is the list of affected Intel processors [#f1]_:
+
+   ===================  ============
+   Common name          Family_Model
+   ===================  ============
+   ATOM_GOLDMONT           06_5CH
+   ATOM_GOLDMONT_D         06_5FH
+   ATOM_GOLDMONT_PLUS      06_7AH
+   ATOM_TREMONT_D          06_86H
+   ATOM_TREMONT            06_96H
+   ALDERLAKE               06_97H
+   ALDERLAKE_L             06_9AH
+   ATOM_TREMONT_L          06_9CH
+   RAPTORLAKE              06_B7H
+   RAPTORLAKE_P            06_BAH
+   ATOM_GRACEMONT          06_BEH
+   RAPTORLAKE_S            06_BFH
+   ===================  ============
+
+As an exception to this table, Intel Xeon E family parts ALDERLAKE(06_97H) and
+RAPTORLAKE(06_B7H) codenamed Catlow are not affected. They are reported as
+vulnerable in Linux because they share the same family/model with an affected
+part. Unlike their affected counterparts, they do not enumerate RFDS_CLEAR or
+CPUID.HYBRID. This information could be used to distinguish between the
+affected and unaffected parts, but it is deemed not worth adding complexity as
+the reporting is fixed automatically when these parts enumerate RFDS_NO.
+
+Mitigation
+==========
+Intel released a microcode update that enables software to clear sensitive
+information using the VERW instruction. Like MDS, RFDS deploys the same
+mitigation strategy to force the CPU to clear the affected buffers before an
+attacker can extract the secrets. This is achieved by using the otherwise
+unused and obsolete VERW instruction in combination with a microcode update.
+The microcode clears the affected CPU buffers when the VERW instruction is
+executed.
+
+Mitigation points
+-----------------
+VERW is executed by the kernel before returning to user space, and by KVM
+before VMentry. None of the affected cores support SMT, so VERW is not required
+at C-state transitions.
+
+New bits in IA32_ARCH_CAPABILITIES
+----------------------------------
+Newer processors and microcode update on existing affected processors added new
+bits to IA32_ARCH_CAPABILITIES MSR. These bits can be used to enumerate
+vulnerability and mitigation capability:
+
+- Bit 27 - RFDS_NO - When set, processor is not affected by RFDS.
+- Bit 28 - RFDS_CLEAR - When set, processor is affected by RFDS, and has the
+  microcode that clears the affected buffers on VERW execution.
+
+Mitigation control on the kernel command line
+---------------------------------------------
+The kernel command line allows to control RFDS mitigation at boot time with the
+parameter "reg_file_data_sampling=". The valid arguments are:
+
+  ==========  =================================================================
+  on          If the CPU is vulnerable, enable mitigation; CPU buffer clearing
+              on exit to userspace and before entering a VM.
+  off         Disables mitigation.
+  ==========  =================================================================
+
+Mitigation default is selected by CONFIG_MITIGATION_RFDS.
+
+Mitigation status information
+-----------------------------
+The Linux kernel provides a sysfs interface to enumerate the current
+vulnerability status of the system: whether the system is vulnerable, and
+which mitigations are active. The relevant sysfs file is:
+
+	/sys/devices/system/cpu/vulnerabilities/reg_file_data_sampling
+
+The possible values in this file are:
+
+  .. list-table::
+
+     * - 'Not affected'
+       - The processor is not vulnerable
+     * - 'Vulnerable'
+       - The processor is vulnerable, but no mitigation enabled
+     * - 'Vulnerable: No microcode'
+       - The processor is vulnerable but microcode is not updated.
+     * - 'Mitigation: Clear Register File'
+       - The processor is vulnerable and the CPU buffer clearing mitigation is
+	 enabled.
+
+References
+----------
+.. [#f1] Affected Processors
+   https://www.intel.com/content/www/us/en/developer/topic-technology/software-security-guidance/processors-affected-consolidated-product-cpu-model.html
diff --git linux-libre-6.6-gnu/Documentation/admin-guide/hw-vuln/spectre.rst linux-libre-6.6.94-gnu/Documentation/admin-guide/hw-vuln/spectre.rst
index 32a8893e5617..e0a1be97fa75 100644
--- linux-libre-6.6-gnu/Documentation/admin-guide/hw-vuln/spectre.rst
+++ linux-libre-6.6.94-gnu/Documentation/admin-guide/hw-vuln/spectre.rst
@@ -138,11 +138,10 @@ associated with the source address of the indirect branch. Specifically,
 the BHB might be shared across privilege levels even in the presence of
 Enhanced IBRS.
 
-Currently the only known real-world BHB attack vector is via
-unprivileged eBPF. Therefore, it's highly recommended to not enable
-unprivileged eBPF, especially when eIBRS is used (without retpolines).
-For a full mitigation against BHB attacks, it's recommended to use
-retpolines (or eIBRS combined with retpolines).
+Previously the only known real-world BHB attack vector was via unprivileged
+eBPF. Further research has found attacks that don't require unprivileged eBPF.
+For a full mitigation against BHB attacks it is recommended to set BHI_DIS_S or
+use the BHB clearing sequence.
 
 Attack scenarios
 ----------------
@@ -430,6 +429,23 @@ The possible values in this file are:
   'PBRSB-eIBRS: Not affected'  CPU is not affected by PBRSB
   ===========================  =======================================================
 
+  - Branch History Injection (BHI) protection status:
+
+.. list-table::
+
+ * - BHI: Not affected
+   - System is not affected
+ * - BHI: Retpoline
+   - System is protected by retpoline
+ * - BHI: BHI_DIS_S
+   - System is protected by BHI_DIS_S
+ * - BHI: SW loop, KVM SW loop
+   - System is protected by software clearing sequence
+ * - BHI: Vulnerable
+   - System is vulnerable to BHI
+ * - BHI: Vulnerable, KVM: SW loop
+   - System is vulnerable; KVM is protected by software clearing sequence
+
 Full mitigation might require a microcode update from the CPU
 vendor. When the necessary microcode is not available, the kernel will
 report vulnerability.
@@ -484,7 +500,11 @@ Spectre variant 2
 
    Systems which support enhanced IBRS (eIBRS) enable IBRS protection once at
    boot, by setting the IBRS bit, and they're automatically protected against
-   Spectre v2 variant attacks.
+   some Spectre v2 variant attacks. The BHB can still influence the choice of
+   indirect branch predictor entry, and although branch predictor entries are
+   isolated between modes when eIBRS is enabled, the BHB itself is not isolated
+   between modes. Systems which support BHI_DIS_S will set it to protect against
+   BHI attacks.
 
    On Intel's enhanced IBRS systems, this includes cross-thread branch target
    injections on SMT systems (STIBP). In other words, Intel eIBRS enables
@@ -638,6 +658,18 @@ kernel command line.
 		spectre_v2=off. Spectre variant 1 mitigations
 		cannot be disabled.
 
+	spectre_bhi=
+
+		[X86] Control mitigation of Branch History Injection
+		(BHI) vulnerability.  This setting affects the deployment
+		of the HW BHI control and the SW BHB clearing sequence.
+
+		on
+			(default) Enable the HW or SW mitigation as
+			needed.
+		off
+			Disable the mitigation.
+
 For spectre_v2_user see Documentation/admin-guide/kernel-parameters.txt
 
 Mitigation selection guide
diff --git linux-libre-6.6-gnu/Documentation/admin-guide/hw-vuln/srso.rst linux-libre-6.6.94-gnu/Documentation/admin-guide/hw-vuln/srso.rst
index b6cfb51cb0b4..e715bfc09879 100644
--- linux-libre-6.6-gnu/Documentation/admin-guide/hw-vuln/srso.rst
+++ linux-libre-6.6.94-gnu/Documentation/admin-guide/hw-vuln/srso.rst
@@ -46,12 +46,22 @@ The possible values in this file are:
 
    The processor is not vulnerable
 
- * 'Vulnerable: no microcode':
+* 'Vulnerable':
+
+   The processor is vulnerable and no mitigations have been applied.
+
+ * 'Vulnerable: No microcode':
 
    The processor is vulnerable, no microcode extending IBPB
    functionality to address the vulnerability has been applied.
 
- * 'Mitigation: microcode':
+ * 'Vulnerable: Safe RET, no microcode':
+
+   The "Safe RET" mitigation (see below) has been applied to protect the
+   kernel, but the IBPB-extending 