diff --git a/.gitignore b/.gitignore index c2ed4ec..0544d50 100644 --- a/.gitignore +++ b/.gitignore @@ -114,3 +114,7 @@ all.config # Kdevelop4 *.kdev4 + +# dtb objects +*.dtb +*.dtbo diff --git b/Documentation/ABI/testing/sysfs-devices-platform-bone_capemgr b/Documentation/ABI/testing/sysfs-devices-platform-bone_capemgr new file mode 100644 index 0000000..e2df613 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-devices-platform-bone_capemgr @@ -0,0 +1,63 @@ +What: /sys/devices/platform/bone_capemgr/slots +Date: May 2015 +KernelVersion: 4.0 +Contact: Pantelis Antoniou +Description: + READ: + Describe the state of all the slots of the beaglebone capemgr. + Each line of the output describes a slot: + The slot format is as following: + : [P-][F-][O-][l-][L-][D-] \ + ,, + , + + Where the flags are: + P: Slot has been probed + F: Slot has failed probing (i.e. no EEPROM detected) + O: Slot has been overridden by the user + l: Slot is current loading + L: Slot has completed loading and is ready + D: Slot has been disabled + + Example: + 0: P---L- -1 BeagleBone RS232 CAPE,00A1,Beagleboardtoys,BB-BONE-SERL-03 + 1: PF---- -1 + 2: PF---- -1 + 3: PF---- -1 + + WRITE: + Writing a string of the form [:version] issues a request to + load a firmware blob containing an overlay. The name of the firmware blob + is -[version|00A0].dtbo. This act is defined as a slot override. + + Writing a negative slot id removes the slot if it was an overridden one, or + unloads a slot that was probed. + +What: /sys/devices/platform/bone_capemgr/baseboard/ +Date: May 2015 +KernelVersion: 4.0 +Contact: Pantelis Antoniou +Description: Contains the probed base board EEPROM field; one of: + board-name - board-name as stored in cape EEPROM + dc-supplied - whether the cape draws or supplies DC + eeprom-format-revision - EEPROM format rev, only 00A0 supported + header - header; should be 'aa 55 33 ee' + manufacturer - manufacturer string + part-number - part-number of the cape + serial-number - serial number of the cape + version - version of the cape, i.e. 00A0 + number-of-pins - displayed but ignored + pin-usage - displayed but ignored + sys-5v - displayed but ignored + vdd-3v3exp - displayed but ignored + vdd-5v - displayed but ignored +What: /sys/devices/platform/bone_capemgr/slot-/ +Date: May 2015 +KernelVersion: 4.0 +Contact: Pantelis Antoniou +Description: Contains the probed cape's EEPROM field; the field is one of: + board-name - baseboard name i.e. A335BNLT + header - header; should be 'aa 55 33 ee' + revision - baseboard revision + serial-number - baseboard serial number + config-option - displayed but ignored diff --git b/Documentation/ABI/testing/sysfs-firmware-devicetree-overlays b/Documentation/ABI/testing/sysfs-firmware-devicetree-overlays new file mode 100644 index 0000000..88d1549 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-firmware-devicetree-overlays @@ -0,0 +1,52 @@ +What: /sys/firmware/devicetree/overlays/ +Date: October 2015 +Contact: Pantelis Antoniou +Description: + This directory contains the applied device tree overlays of + the running system, as directories of the overlay id. + +What: /sys/firmware/devicetree/overlays/enable +Date: October 2015 +Contact: Pantelis Antoniou +Description: + The master enable switch, by default is 1, and when + set to 0 it cannot be re-enabled for security reasons. + + The discussion about this switch takes place in: + http://comments.gmane.org/gmane.linux.drivers.devicetree/101871 + + Kees Cook: + "Coming from the perspective of drawing a bright line between + kernel and the root user (which tends to start with disabling + kernel module loading), I would say that there at least needs + to be a high-level one-way "off" switch for the interface so + that systems that have this interface can choose to turn it off + during initial boot, etc." + +What: /sys/firmware/devicetree/overlays/ +Date: October 2015 +Contact: Pantelis Antoniou +Description: + Each directory represents an applied overlay, containing + the following attribute files. + +What: /sys/firmware/devicetree/overlays//can_remove +Date: October 2015 +Contact: Pantelis Antoniou +Description: + The attribute set to 1 means that the overlay can be removed, + while 0 means that the overlay is being overlapped therefore + removal is prohibited. + +What: /sys/firmware/devicetree/overlays/// +Date: October 2015 +Contact: Pantelis Antoniou +Description: + Each of these directories contain information about of the + particular overlay fragment. + +What: /sys/firmware/devicetree/overlays///target +Date: October 2015 +Contact: Pantelis Antoniou +Description: + The full-path of the target of the fragment diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt index 94b57f2..413aeed 100644 --- a/Documentation/devicetree/bindings/arm/omap/omap.txt +++ b/Documentation/devicetree/bindings/arm/omap/omap.txt @@ -24,6 +24,8 @@ Optional properties: - ti,no-reset-on-init: When present, the module should not be reset at init - ti,no-idle-on-init: When present, the module should not be idled at init - ti,no-idle: When present, the module is never allowed to idle. +- ti,deassert-hard-reset: list of hwmod and hardware reset line name pairs + (ascii strings) to be deasserted upon device instantiation. Example: diff --git b/Documentation/devicetree/bindings/misc/bone_capemgr.txt b/Documentation/devicetree/bindings/misc/bone_capemgr.txt new file mode 100644 index 0000000..7e4fbc9 --- /dev/null +++ b/Documentation/devicetree/bindings/misc/bone_capemgr.txt @@ -0,0 +1,111 @@ +* Beaglebone cape manager driver + +Required properties: +- compatible: "ti,bone-capemgr" +- eeprom: phandle to the EEPROM baseboard. + The EEPROM framework interface is use to obtain the data. + +Required children nodes: + +- baseboardmaps: Contains nodes, which each of the them defines a mapping from + the baseboard EEPROM board-name ID to a DT friendly compatible + string. + + - board-name: The baseboard EEPROM board name, i.e. A335BONE for the + original beaglebone white. + - compatible-name: The DT friendly compatible string to be used for matching + compatible capes, i.e. "ti,beaglebone" + + + - nvmem-cells: Defines the phandles of the nvmem cells of the baseboard and the + slots. + - nvmem-cells: Defines the names of the nvmem cells. Required to have at + least a baseboard cell name. + + - #slots: Defines how many slots are there. + +- Example of a beaglebone cape-manager: + +bone_capemgr { + compatible = "ti,bone-capemgr"; + status = "okay"; + + nvmem-cell = <&baseboard_data + &cape0_data &cape1_data &cape2_data &cape3_data>; + nvmem-cell-names = "baseboard", "slot0", "slot1", "slot2", "slot3"; + + #slots = <4>; + + /* map board revisions to compatible definitions */ + baseboardmaps { + baseboard_beaglebone: board@0 { + board-name = "A335BONE"; + compatible-name = "ti,beaglebone"; + }; + + baseboard_beaglebone_black: board@1 { + board-name = "A335BNLT"; + compatible-name = "ti,beaglebone-black"; + }; + }; +}; + +The format of the cape to be loaded is in a standard overlay format with +the following root properties that are interpreted by the cape manager: + +Required properties: + - compatible: Should be compatible to the baseboard according to the + baseboard map value, i.e. "ti,beaglebone". + - part-numer: Should contain the part-number as stored in the EEPROM. + - version: Should contain a list of all the version that are supported + by the single cape dtbo, i.e. "00A1". + +Optional properties: + - exclusive-use: A string list which state the resources this cape requires. + No processing or matching to anything regarding the internal + kernel state is performed; it's purpose is to guard against + conflicts with other capes. + - priority: A priority to be assigned when loading a cape. A lower value + has higher priority. The purpose of the priority is to control + which cape is loaded first in case of a conflict. + +- Example of a serial cape: + +/dts-v1/; +/plugin/; +/ { + compatible = "ti,beaglebone", "ti,beaglebone-black"; + + /* identification */ + part-number = "BB-BONE-SERL-03"; + version = "00A1"; + + /* state the resources this cape uses */ + exclusive-use = + /* the pin header uses */ + "P9.21", /* uart2_txd */ + "P9.22", /* uart2_rxd */ + /* the hardware ip uses */ + "uart2"; + + fragment@0 { + target = <&am33xx_pinmux>; + __overlay__ { + bb_uart2_pins: pinmux_bb_uart2_pins { + pinctrl-single,pins = < + 0x150 0x21 /* spi0_sclk.uart2_rxd | MODE1 */ + 0x154 0x01 /* spi0_d0.uart2_txd | MODE1 */ + >; + }; + }; + }; + + fragment@1 { + target = <&uart2>; + __overlay__ { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&bb_uart2_pins>; + }; + }; +}; diff --git b/Documentation/devicetree/bindings/net/allwinner,sun8i-emac.txt b/Documentation/devicetree/bindings/net/allwinner,sun8i-emac.txt new file mode 100644 index 0000000..4bf4e53 --- /dev/null +++ b/Documentation/devicetree/bindings/net/allwinner,sun8i-emac.txt @@ -0,0 +1,65 @@ +* Allwinner sun8i EMAC ethernet controller + +Required properties: +- compatible: "allwinner,sun8i-a83t-emac", "allwinner,sun8i-h3-emac", + or "allwinner,sun50i-a64-emac" +- reg: address and length of the register sets for the device. +- reg-names: should be "emac" and "syscon", matching the register sets +- interrupts: interrupt for the device +- clocks: A phandle to the reference clock for this device +- clock-names: should be "ahb" +- resets: A phandle to the reset control for this device +- reset-names: should be "ahb" +- phy-mode: See ethernet.txt +- phy or phy-handle: See ethernet.txt +- #address-cells: shall be 1 +- #size-cells: shall be 0 + +"allwinner,sun8i-h3-emac" also requires: +- clocks: an extra phandle to the reference clock for the EPHY +- clock-names: an extra "ephy" entry matching the clocks property +- resets: an extra phandle to the reset control for the EPHY +- resets-names: an extra "ephy" entry matching the resets property + +See ethernet.txt in the same directory for generic bindings for ethernet +controllers. + +The device node referenced by "phy" or "phy-handle" should be a child node +of this node. See phy.txt for the generic PHY bindings. + +Optional properties: +- phy-supply: phandle to a regulator if the PHY needs one +- phy-io-supply: phandle to a regulator if the PHY needs a another one for I/O. + This is sometimes found with RGMII PHYs, which use a second + regulator for the lower I/O voltage. +- allwinner,tx-delay: The setting of the TX clock delay chain +- allwinner,rx-delay: The setting of the RX clock delay chain + +The TX/RX clock delay chain settings are board specific. + +Optional properties for "allwinner,sun8i-h3-emac": +- allwinner,use-internal-phy: Use the H3 SoC's internal E(thernet) PHY +- allwinner,leds-active-low: EPHY LEDs are active low + +When the internal PHY is requested, the implementation shall configure the +internal PHY to use the address specified in the child PHY node. + +Example: + +emac: ethernet@01c0b000 { + compatible = "allwinner,sun8i-h3-emac"; + reg = <0x01c0b000 0x104>, <0x01c00030 0x4>; + reg-names = "emac", "syscon"; + interrupts = ; + clocks = <&bus_gates 17>, <&bus_gates 128>; + clock-names = "ahb", "ephy"; + resets = <&ahb_rst 17>, <&ahb_rst 66>; + reset-names = "ahb", "ephy"; + phy = <&phy1>; + allwinner,use-internal-phy; + allwinner,leds-active-low; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; diff --git b/Documentation/devicetree/bindings/pinctrl/ti,iodelay-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/ti,iodelay-pinctrl.txt new file mode 100644 index 0000000..e12f4e5 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/ti,iodelay-pinctrl.txt @@ -0,0 +1,86 @@ +Texas Instruments I/O Delay module configuration pinctrl definition + +Used in conjunction with Documentation/devicetree/bindings/pinctrl/ti,omap-pinctrl.txt + +Required Properties: +- compatible: Should be: + "ti,dra7-iodelay" - I/O delay configuration for DRA7 +- reg - must be the register address range of IODelay module +- #address-cells = <1>; +- #size-cells = <0>; + +Important note: Use of "ti,dra7-iodelay" compatible definition need to be +carefully evaluated due to the expectation of glitch during configuration. + +Example: + +dra7_iodelay_core: padconf@4844a000 { + compatible = "ti,dra7-iodelay"; + reg = <0x4844a000 0x0d1c>; + #address-cells = <1>; + #size-cells = <0>; +}; + +Configuration definition follows similar model as the pinctrl-single: +The groups of pin configuration are defined under "pinctrl-single,pins" + +&dra7_iodelay_core { + mmc2_iodelay_3v3_conf: mmc2_iodelay_3v3_conf { + pinctrl-single,pins = < + 0x18c (A_DELAY(0) | G_DELAY(120)) /* CFG_GPMC_A19_IN */ + 0x1a4 (A_DELAY(265) | G_DELAY(360)) /* CFG_GPMC_A20_IN */ + 0x1b0 (A_DELAY(0) | G_DELAY(120)) /* CFG_GPMC_A21_IN */ + 0x1bc (A_DELAY(0) | G_DELAY(120)) /* CFG_GPMC_A22_IN */ + 0x1c8 (A_DELAY(287) | G_DELAY(420)) /* CFG_GPMC_A23_IN */ + 0x1d4 (A_DELAY(144) | G_DELAY(240)) /* CFG_GPMC_A24_IN */ + 0x1e0 (A_DELAY(0) | G_DELAY(0)) /* CFG_GPMC_A25_IN */ + 0x1ec (A_DELAY(120) | G_DELAY(0)) /* CFG_GPMC_A26_IN */ + 0x1f8 (A_DELAY(120) | G_DELAY(180)) /* CFG_GPMC_A27_IN */ + 0x360 (A_DELAY(0) | G_DELAY(0)) /* CFG_GPMC_CS1_IN */ + >; + }; +}; + +Usage in conjunction with pinctrl single: + +For a complete description of the pins both the regular muxing as well as the +iodelay configuration is necessary. For example: + +&dra7_pmx_core { + mmc2_pins_default: mmc2_pins_default { + pinctrl-single,pins = < + 0x9c (PIN_INPUT_PULLUP | MANUAL_MODE | MUX_MODE1) /* gpmc_a23.mmc2_clk */ + 0xb0 (PIN_INPUT_PULLUP | MANUAL_MODE | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */ + 0xa0 (PIN_INPUT_PULLUP | MANUAL_MODE | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */ + 0xa4 (PIN_INPUT_PULLUP | MANUAL_MODE | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */ + 0xa8 (PIN_INPUT_PULLUP | MANUAL_MODE | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */ + 0xac (PIN_INPUT_PULLUP | MANUAL_MODE | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */ + 0x8c (PIN_INPUT_PULLUP | MANUAL_MODE | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */ + 0x90 (PIN_INPUT_PULLUP | MANUAL_MODE | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */ + 0x94 (PIN_INPUT_PULLUP | MANUAL_MODE | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */ + 0x98 (PIN_INPUT_PULLUP | MANUAL_MODE | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */ + >; + }; +}; + +&dra7_iodelay_core { + mmc2_iodelay_3v3_conf: mmc2_iodelay_3v3_conf { + pinctrl-single,pins = < + 0x18c (A_DELAY(0) | G_DELAY(120)) /* CFG_GPMC_A19_IN */ + 0x1a4 (A_DELAY(265) | G_DELAY(360)) /* CFG_GPMC_A20_IN */ + 0x1b0 (A_DELAY(0) | G_DELAY(120)) /* CFG_GPMC_A21_IN */ + 0x1bc (A_DELAY(0) | G_DELAY(120)) /* CFG_GPMC_A22_IN */ + 0x1c8 (A_DELAY(287) | G_DELAY(420)) /* CFG_GPMC_A23_IN */ + 0x1d4 (A_DELAY(144) | G_DELAY(240)) /* CFG_GPMC_A24_IN */ + 0x1e0 (A_DELAY(0) | G_DELAY(0)) /* CFG_GPMC_A25_IN */ + 0x1ec (A_DELAY(120) | G_DELAY(0)) /* CFG_GPMC_A26_IN */ + 0x1f8 (A_DELAY(120) | G_DELAY(180)) /* CFG_GPMC_A27_IN */ + 0x360 (A_DELAY(0) | G_DELAY(0)) /* CFG_GPMC_CS1_IN */ + >; + }; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins_default &mmc2_iodelay_3v3_conf>; +}; diff --git b/Documentation/devicetree/bindings/power/pwrseq/pwrseq-generic.txt b/Documentation/devicetree/bindings/power/pwrseq/pwrseq-generic.txt new file mode 100644 index 0000000..ebf0d47 --- /dev/null +++ b/Documentation/devicetree/bindings/power/pwrseq/pwrseq-generic.txt @@ -0,0 +1,48 @@ +The generic power sequence library + +Some hard-wired devices (eg USB/MMC) need to do power sequence before +the device can be enumerated on the bus, the typical power sequence +like: enable USB PHY clock, toggle reset pin, etc. But current +Linux device driver lacks of such code to do it, it may cause some +hard-wired devices works abnormal or can't be recognized by +controller at all. The power sequence will be done before this device +can be found at the bus. + +The power sequence properties is under the device node. + +Optional properties: +- clocks: the input clocks for device. +- reset-gpios: Should specify the GPIO for reset. +- reset-duration-us: the duration in microsecond for assert reset signal. + +Below is the example of USB power sequence properties on USB device +nodes which have two level USB hubs. + +&usbotg1 { + vbus-supply = <®_usb_otg1_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_otg1_id>; + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + genesys: hub@1 { + compatible = "usb5e3,608"; + reg = <1>; + + clocks = <&clks IMX6SX_CLK_CKO>; + reset-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>; /* hub reset pin */ + reset-duration-us = <10>; + + #address-cells = <1>; + #size-cells = <0>; + asix: ethernet@1 { + compatible = "usbb95,1708"; + reg = <1>; + + clocks = <&clks IMX6SX_CLK_IPG>; + reset-gpios = <&gpio4 6 GPIO_ACTIVE_LOW>; /* ethernet_rst */ + reset-duration-us = <15>; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/usb/usb-device.txt b/Documentation/devicetree/bindings/usb/usb-device.txt index 1c35e7b..3661dd2 100644 --- a/Documentation/devicetree/bindings/usb/usb-device.txt +++ b/Documentation/devicetree/bindings/usb/usb-device.txt @@ -13,6 +13,10 @@ Required properties: - reg: the port number which this device is connecting to, the range is 1-31. +Optional properties: +power sequence properties, see +Documentation/devicetree/bindings/power/pwrseq/pwrseq-generic.txt for detail + Example: &usb1 { @@ -21,8 +25,12 @@ Example: #address-cells = <1>; #size-cells = <0>; - hub: genesys@1 { + genesys: hub@1 { compatible = "usb5e3,608"; reg = <1>; + + clocks = <&clks IMX6SX_CLK_CKO>; + reset-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>; /* hub reset pin */ + reset-duration-us = <10>; }; } diff --git b/Documentation/devicetree/configfs-overlays.txt b/Documentation/devicetree/configfs-overlays.txt new file mode 100644 index 0000000..5fa43e0 --- /dev/null +++ b/Documentation/devicetree/configfs-overlays.txt @@ -0,0 +1,31 @@ +Howto use the configfs overlay interface. + +A device-tree configfs entry is created in /config/device-tree/overlays +and and it is manipulated using standard file system I/O. +Note that this is a debug level interface, for use by developers and +not necessarily something accessed by normal users due to the +security implications of having direct access to the kernel's device tree. + +* To create an overlay you mkdir the directory: + + # mkdir /config/device-tree/overlays/foo + +* Either you echo the overlay firmware file to the path property file. + + # echo foo.dtbo >/config/device-tree/overlays/foo/path + +* Or you cat the contents of the overlay to the dtbo file + + # cat foo.dtbo >/config/device-tree/overlays/foo/dtbo + +The overlay file will be applied, and devices will be created/destroyed +as required. + +To remove it simply rmdir the directory. + + # rmdir /config/device-tree/overlays/foo + +The rationalle of the dual interface (firmware & direct copy) is that each is +better suited to different use patterns. The firmware interface is what's +intended to be used by hardware managers in the kernel, while the copy interface +make sense for developers (since it avoids problems with namespaces). diff --git a/Documentation/devicetree/overlay-notes.txt b/Documentation/devicetree/overlay-notes.txt index d418a6c..3e8df30 100644 --- a/Documentation/devicetree/overlay-notes.txt +++ b/Documentation/devicetree/overlay-notes.txt @@ -100,6 +100,14 @@ Finally, if you need to remove all overlays in one-go, just call of_overlay_destroy_all() which will remove every single one in the correct order. +If your board has multiple slots/places where a single overlay can work +and each slot is defined by a node, you can use the +of_overlay_create_target_index() method to select the target. + +For overlays on probeable busses, use the of_overlay_create_target_root() method +in which you supply a device node as a target root, and which all target +references in the overlay are performed relative to that node. + Overlay DTS Format ------------------ @@ -110,9 +118,11 @@ The DTS of an overlay should have the following format: fragment@0 { /* first child node */ - target=; /* phandle target of the overlay */ + /* phandle target of the overlay */ + target= [, , ...]; or - target-path="/path"; /* target path of the overlay */ + /* target path of the overlay */ + target-path="/path" [ , "/path", ...]; __overlay__ { property-a; /* add property-a to the target */ @@ -131,3 +141,11 @@ Using the non-phandle based target method allows one to use a base DT which does not contain a __symbols__ node, i.e. it was not compiled with the -@ option. The __symbols__ node is only required for the target= method, since it contains the information required to map from a phandle to a tree location. + +Using a target index requires the use of a selector target on the call to +of_overlay_create_target_index(). I.e. passing an index of 0 will select the +target in the foo node, an index of 1 the bar node, etc. + +Note that when using the target root create method all target references must +lie under the target root node. I.e. the overlay is not allowed to 'break' out +of the root. diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index a4f4d69..2933289 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -90,6 +90,7 @@ parameter is applicable: NET Appropriate network support is enabled. NUMA NUMA support is enabled. NFS Appropriate NFS support is enabled. + OF Open Firmware support (device tree) is enabled. OSS OSS sound support is enabled. PV_OPS A paravirtualized kernel is enabled. PARIDE The ParIDE (parallel port IDE) subsystem is enabled. @@ -2787,6 +2788,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted. This can be set from sysctl after boot. See Documentation/sysctl/vm.txt for details. + of_overlay_disable [OF] Disable device tree overlays at boot time. + ohci1394_dma=early [HW] enable debugging via the ohci1394 driver. See Documentation/debugging-via-ohci1394.txt for more info. diff --git b/Documentation/misc-devices/bone_capemgr.txt b/Documentation/misc-devices/bone_capemgr.txt new file mode 100644 index 0000000..2a8c766 --- /dev/null +++ b/Documentation/misc-devices/bone_capemgr.txt @@ -0,0 +1,63 @@ +--------------------------- + Beaglebone Cape-Manager +--------------------------- + +The beaglebone cape manager driver allows the automatic use of external +peripheral capes to be automatically supported by Linux without any manual +setup required by the user. + +Each beaglebone cape should contain an EEPROM that describes +it in a fixed I2C address on the i2c2 bus of the baseboard. +The format of the EEPROM is defined in the beaglebone reference +manual at: +http://beagleboard.org/static/beaglebone/latest/Docs/Hardware/BONE_SRM.pdf + +Reading the part number and revision information the manager +requests a firmware file formatted as a device tree overlay blob. + +Applying the overlay the devices are instantiated and the cape is +ready to be used. + +For instance if the part-number is BB-BONE-SERL-03 and the version is 00A1 +the firmware file requested will be BB-BONE-SERL-03-00A1-00A1.dtbo +It will be located by the in-kernel firmware +loader in the usual place, i.e. /lib/firmware/`uname -r`, /lib/firmware etc. + +The driver supports the following parameters (either as part of the kernel +command line or supplied at module insertion time). + +disable_partno: A comma delimited list of PART-NUMBER[:REV] of + disabled capes. +enable_partno: A comma delimited list of PART-NUMBER[:REV[:PRIO]] of + enabled capes. +boot_scan_period: The boot scan period in ms. When the cape manager is built-in + the kernel image, the firmware loader cannot find the files + before the rootfs is mounted. This parameter controls the + period with which the boot state is checked in that case. + +There's a sysfs control interface which is defined at the ABI documentation +area. + +Theory of operation: +-------------------- + +On driver probe the I2C EEPROM of the baseboard is read and information about +the current baseboard is retrieved. This information includes the mapping from +baseboard board name to DT friendly compatible string. I.e. the "A335BONE" board +name from EEPROM is mapped to the "ti,beaglebone" compatible string which should +be present in the dtbo to be loaded. + +Afterwards the EEPROMs declared in each slot are probed, and the EEPROMs found +are decoded keeping track the cape part-number and version data. + +Using the part-number and version a firmware file is requested (the firmware +file requested is -.dtbo). + +The dtbo is unflattend and the resulting device tree is matched against a +compatible baseboard, and in case of multiple parallel loading capes the +priorities defined are honored. That means that when there are multiple capes +being loaded in parallel the ones with the lowest priority number are loaded +first. + +Applying the device tree overlay makes the cape operational, as if it was part +of the kernel's booting device tree. diff --git a/Documentation/printk-formats.txt b/Documentation/printk-formats.txt index 5962949..d1ba882 100644 --- a/Documentation/printk-formats.txt +++ b/Documentation/printk-formats.txt @@ -324,10 +324,49 @@ Network device features: Passed by reference. +Command from struct task_struct + + %pT ls + + For printing executable name excluding path from struct + task_struct. + + Passed by reference. + +Device tree nodes: + + %pO[fnpPcCFr] + + For printing device tree nodes. The optional arguments are: + f device node full_name + n device node name + p device node phandle + P device node path spec (name + @unit) + F device node flags + c major compatible string + C full compatible string + r node reference count + Without any arguments prints full_name (same as %pOf) + The separator when using multiple arguments is '|' + + Examples: + + %pO /foo/bar@0 - Node full name + %pOf /foo/bar@0 - Same as above + %pOfp /foo/bar@0|10 - Node full name + phandle + %pOfcF /foo/bar@0|foo,device|--P- - Node full name + + major compatible string + + node flags + D - dynamic + d - detached + P - Populated + B - Populated bus + + Passed by reference + If you add other %p extensions, please extend lib/test_printf.c with one or more test cases, if at all feasible. - Thank you for your cooperation and attention. diff --git a/MAINTAINERS b/MAINTAINERS index f593300..a757e54 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -582,6 +582,12 @@ S: Maintained F: Documentation/i2c/busses/i2c-ali1563 F: drivers/i2c/busses/i2c-ali1563.c +ALLWINNER SUN8I-EMAC ETHERNET DRIVER +M: Corentin Labbe +L: netdev@vger.kernel.org +S: Maintained +F: drivers/net/ethernet/allwinner/sun8i-emac.c + ALLWINNER SECURITY SYSTEM M: Corentin Labbe L: linux-crypto@vger.kernel.org @@ -2364,6 +2370,14 @@ W: https://linuxtv.org S: Supported F: drivers/media/platform/sti/bdisp +BEAGLEBONE CAPEMANAGER +M: Pantelis Antoniou +S: Maintained +F: drivers/misc/beaglebone-capemgr.c +F: Documentation/misc-devices/bone_capemgr.txt +F: Documentation/devicetree/bindings/misc/bone_capemgr.txt +F: Documentation/ABI/testing/sysfs-devices-platform-bone_capemgr + BEFS FILE SYSTEM M: Luis de Bethencourt M: Salah Triki @@ -9353,6 +9367,15 @@ F: include/linux/pm_* F: include/linux/powercap.h F: drivers/powercap/ +POWER SEQUENCE LIBRARY +M: Peter Chen +T: git git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb.git +L: linux-pm@vger.kernel.org +S: Maintained +F: Documentation/devicetree/bindings/power/pwrseq/ +F: drivers/power/pwrseq/ +F: include/linux/power/pwrseq.h/ + POWER SUPPLY CLASS/SUBSYSTEM and DRIVERS M: Sebastian Reichel M: Dmitry Eremin-Solenikov diff --git a/Makefile b/Makefile index 25011b4..ac27c68 100644 --- a/Makefile +++ b/Makefile @@ -398,7 +398,7 @@ KBUILD_CPPFLAGS := -D__KERNEL__ KBUILD_CFLAGS := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \ -fno-strict-aliasing -fno-common \ -Werror-implicit-function-declaration \ - -Wno-format-security -fno-PIE \ + -Wno-format-security \ -std=gnu89 KBUILD_AFLAGS_KERNEL := diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 61f6ccc..1144422 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -13,7 +13,12 @@ # Ensure linker flags are correct LDFLAGS := -LDFLAGS_vmlinux :=-p --no-undefined -X --pic-veneer +GCCVERSIONISGTE5 := $(shell expr `$(HOSTCC) -dumpversion | cut -f1 -d.` \>= 5) +ifeq "$(GCCVERSIONISGTE5)" "1" +LDFLAGS_vmlinux :=-p --no-undefined -X +else +LDFLAGS_vmlinux :=-p --no-undefined -X --pic-veneer +endif ifeq ($(CONFIG_CPU_ENDIAN_BE8),y) LDFLAGS_vmlinux += --be8 LDFLAGS_MODULE += --be8 diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile index bdc1d5a..b619d3c 100644 --- a/arch/arm/boot/Makefile +++ b/arch/arm/boot/Makefile @@ -27,6 +27,10 @@ export ZRELADDR INITRD_PHYS PARAMS_PHYS targets := Image zImage xipImage bootpImage uImage +ifeq ($(CONFIG_OF_OVERLAY),y) +DTC_FLAGS += -@ +endif + ifeq ($(CONFIG_XIP_KERNEL),y) $(obj)/xipImage: vmlinux FORCE diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index faacd52..63c8f7d 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -1,11 +1,17 @@ ifeq ($(CONFIG_OF),y) +ifeq ($(CONFIG_OF_OVERLAY),y) +DTC_FLAGS += -@ +endif + dtb-$(CONFIG_ARCH_ALPINE) += \ alpine-db.dtb dtb-$(CONFIG_MACH_ARTPEC6) += \ artpec6-devboard.dtb + dtb-$(CONFIG_MACH_ASM9260) += \ alphascale-asm9260-devkit.dtb + # Keep at91 dtb files sorted alphabetically for each SoC dtb-$(CONFIG_SOC_AT91RM9200) += \ at91rm9200ek.dtb \ @@ -148,6 +154,7 @@ dtb-$(CONFIG_ARCH_EXYNOS5) += \ exynos5420-arndale-octa.dtb \ exynos5420-peach-pit.dtb \ exynos5420-smdk5420.dtb \ + exynos5422-artik10-eval.dtb \ exynos5422-odroidxu3.dtb \ exynos5422-odroidxu3-lite.dtb \ exynos5422-odroidxu4.dtb \ @@ -339,6 +346,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6dl-sabreauto.dtb \ imx6dl-sabrelite.dtb \ imx6dl-sabresd.dtb \ + imx6dl-sabresd-wl1835.dtb \ imx6dl-tx6dl-comtft.dtb \ imx6dl-tx6s-8034.dtb \ imx6dl-tx6s-8035.dtb \ @@ -356,6 +364,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-b650v3.dtb \ imx6q-b850v3.dtb \ imx6q-cm-fx6.dtb \ + imx6q-ccimx6sbc.dtb \ imx6q-cubox-i.dtb \ imx6q-dfi-fs700-m60.dtb \ imx6q-dmo-edmqmx6.dtb \ @@ -380,6 +389,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-sabreauto.dtb \ imx6q-sabrelite.dtb \ imx6q-sabresd.dtb \ + imx6q-sabresd-wl1835.dtb \ imx6q-sbc6x.dtb \ imx6q-tbs2910.dtb \ imx6q-tx6q-1010.dtb \ @@ -398,6 +408,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6qp-sabresd.dtb dtb-$(CONFIG_SOC_IMX6SL) += \ imx6sl-evk.dtb \ + imx6sl-evk-wl1835.dtb \ imx6sl-warp.dtb dtb-$(CONFIG_SOC_IMX6SX) += \ imx6sx-nitrogen6sx.dtb \ @@ -407,6 +418,7 @@ dtb-$(CONFIG_SOC_IMX6SX) += \ imx6sx-sdb.dtb dtb-$(CONFIG_SOC_IMX6UL) += \ imx6ul-14x14-evk.dtb \ + imx6ul-14x14-evk-ism43362-b81-evb.dtb \ imx6ul-pico-hobbit.dtb \ imx6ul-tx6ul-0010.dtb \ imx6ul-tx6ul-0011.dtb \ @@ -533,6 +545,26 @@ dtb-$(CONFIG_SOC_AM33XX) += \ am335x-base0033.dtb \ am335x-bone.dtb \ am335x-boneblack.dtb \ + am335x-arduino-tre.dtb \ + am335x-sancloud-bbe.dtb \ + am335x-boneblue.dtb \ + am335x-boneblack-wireless.dtb \ + am335x-bonegreen-wireless-led-hack.dtb \ + am335x-bonegreen-wireless.dtb \ + am335x-boneblack-audio.dtb \ + am335x-boneblack-bbb-exp-r.dtb \ + am335x-boneblack-bbb-exp-c.dtb \ + am335x-boneblack-bbbmini.dtb \ + am335x-boneblack-wl1835mod.dtb \ + am335x-boneblack-cape-bone-argus.dtb \ + am335x-bone-cape-bone-argus.dtb \ + am335x-olimex-som.dtb \ + am335x-abbbi.dtb \ + am335x-bonegreen-overlay.dtb \ + am335x-boneblack-overlay.dtb \ + am335x-boneblack-nhdmi-overlay.dtb \ + am335x-boneblack-hdmi-overlay.dtb \ + am335x-boneblack-emmc-overlay.dtb \ am335x-bonegreen.dtb \ am335x-chiliboard.dtb \ am335x-cm-t335.dtb \ @@ -552,6 +584,7 @@ dtb-$(CONFIG_ARCH_OMAP4) += \ omap4-panda.dtb \ omap4-panda-a4.dtb \ omap4-panda-es.dtb \ + omap4-panda-es-b3.dtb \ omap4-sdp.dtb \ omap4-sdp-es23plus.dtb \ omap4-var-dvk-om44.dtb \ diff --git b/arch/arm/boot/dts/am335x-abbbi.dts b/arch/arm/boot/dts/am335x-abbbi.dts new file mode 100644 index 0000000..accf950 --- /dev/null +++ b/arch/arm/boot/dts/am335x-abbbi.dts @@ -0,0 +1,174 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright 2015 Konsulko Group + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am335x-bone-common.dtsi" +#include "am33xx-overlay-edma-fix.dtsi" + +/ { + model = "Arrow BeagleBone Black Industrial"; + compatible = "arrow,am335x-abbbi", "ti,am335x-bone", "ti,am33xx"; +}; + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; + +&mmc2 { + vmmc-supply = <&vmmcsd_fixed>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_pins>; + bus-width = <8>; + status = "okay"; +}; + +&cpu0_opp_table { + /* + * All PG 2.0 silicon may not support 1GHz but some of the early + * BeagleBone Blacks have PG 2.0 silicon which is guaranteed + * to support 1GHz OPP so enable it for PG 2.0 on this board. + */ + oppnitro@1000000000 { + opp-supported-hw = <0x06 0x0100>; + }; +}; + +&am33xx_pinmux { + adi_hdmi_bbbi_pins: adi_hdmi_bbbi_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr0 */ + AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */ + AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */ + AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */ + AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */ + AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */ + AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */ + AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */ + AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */ + AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */ + AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */ + AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */ + AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */ + AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */ + AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */ + AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */ + AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */ + AM33XX_IOPAD(0x8e0, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_vsync.lcd_vsync */ + AM33XX_IOPAD(0x8e4, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_hsync.lcd_hsync */ + AM33XX_IOPAD(0x8e8, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_pclk.lcd_pclk */ + AM33XX_IOPAD(0x8ec, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */ + >; + }; + adi_hdmi_bbbi_off_pins: adi_hdmi_bbbi_off_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr0 */ + >; + }; + + mcasp0_pins: mcasp0_pins { + pinctrl-single,pins = < + 0x1ac (PIN_INPUT_PULLUP | MUX_MODE0) /* mcasp0_ahclkx.mcasp0_ahclkx */ + 0x19c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2 */ + 0x194 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mcasp0_fsx.mcasp0_fsx */ + 0x190 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp0_aclkx.mcasp0_aclkx */ + 0x06c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a11.GPIO1_27 */ + >; + }; + + mcasp0_pins_sleep: mcasp0_pins_sleep { + pinctrl-single,pins = < + 0x1ac (PIN_INPUT_PULLDOWN | MUX_MODE7) /* mcasp0_ahclkx.mcasp0_ahclkx */ + 0x19c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* mcasp0_ahclkr.mcasp0_axr2 */ + 0x194 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* mcasp0_fsx.mcasp0_fsx */ + 0x190 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* mcasp0_aclkx.mcasp0_aclkx */ + 0x06c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a11.GPIO1_27 */ + >; + }; +}; + +&lcdc { + status = "okay"; + port { + lcdc_0: endpoint@0 { + remote-endpoint = <&hdmi_0>; + }; + }; +}; + +&i2c0 { + adv7511w { + compatible = "adi,adv7511w"; + reg = <0x39>; + pinctrl-names = "default", "off"; + pinctrl-0 = <&adi_hdmi_bbbi_pins>; + pinctrl-1 = <&adi_hdmi_bbbi_off_pins>; + + port { + hdmi_0: endpoint@0 { + remote-endpoint = <&lcdc_0>; + }; + }; + }; +}; + +&mcasp0 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mcasp0_pins>; + pinctrl-1 = <&mcasp0_pins_sleep>; + status = "okay"; + op-mode = <0>; /* MCASP_IIS_MODE */ + tdm-slots = <2>; + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 0 0 1 0 + >; + tx-num-evt = <1>; + rx-num-evt = <1>; +}; + +/ { + clk_mcasp0_fixed: clk_mcasp0_fixed { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24576000>; + }; + + clk_mcasp0: clk_mcasp0 { + #clock-cells = <0>; + compatible = "gpio-gate-clock"; + clocks = <&clk_mcasp0_fixed>; + enable-gpios = <&gpio1 27 0>; /* BeagleBone Black Clk enable on GPIO1_27 */ + }; + + hdmi_audio: hdmi_audio@0 { + compatible = "linux,hdmi-audio"; + status = "okay"; + }; + + sound { + compatible = "ti,beaglebone-black-audio"; + ti,model = "TI BeagleBone Black"; + ti,audio-codec = <&hdmi_audio>; + ti,mcasp-controller = <&mcasp0>; + ti,audio-routing = + "HDMI Out", "TX"; + clocks = <&clk_mcasp0>; + clock-names = "mclk"; + }; +}; + +&rtc { + system-power-controller; +}; diff --git b/arch/arm/boot/dts/am335x-arduino-tre.dts b/arch/arm/boot/dts/am335x-arduino-tre.dts new file mode 100644 index 0000000..9e27df0 --- /dev/null +++ b/arch/arm/boot/dts/am335x-arduino-tre.dts @@ -0,0 +1,576 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" + +/ { + model = "TI AM335x Arduino Tre"; + compatible = "ti,am335x-arduino-tre", "ti,am335x-boneblack", "ti,am335x-bone", "ti,am33xx"; + + cpus { + cpu@0 { + cpu0-supply = <&dcdc2_reg>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x10000000>; /* 512 MB */ + }; + + leds { + pinctrl-names = "default"; + pinctrl-0 = <&userled_pins>; + + compatible = "gpio-leds"; + + led@0 { + label = "arduino_tre:yel:usr0"; + gpios = <&gpio1 21 0>; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + + led@1 { + label = "arduino_tre:red:usr1"; + gpios = <&gpio1 22 0>; + linux,default-trigger = "none"; + default-state = "off"; + }; + + led@2 { + label = "arduino_tre:blu:usr2"; + gpios = <&gpio1 23 0>; + linux,default-trigger = "none"; + default-state = "off"; + }; + + led@3 { + label = "arduino_tre:grn:usr3"; + gpios = <&gpio1 24 0>; + linux,default-trigger = "cpu0"; + default-state = "off"; + }; + }; + + hdmi { + compatible = "ti,tilcdc,slave"; + i2c = <&i2c0>; + pinctrl-names = "default", "off"; + pinctrl-0 = <&nxp_hdmi_bonelt_pins>; + pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>; + status = "okay"; + }; + + sound { + compatible = "ti,da830-evm-audio"; + ti,model = "DA830 EVM"; + ti,audio-codec = <&tlv320aic3x>; + ti,mcasp-controller = <&mcasp0>; + ti,codec-clock-rate = <12000000>; + ti,audio-routing = + "Headphone Jack", "HPLOUT", + "Headphone Jack", "HPROUT", + "LINE2L", "Line In", + "LINE2R", "Line In"; + }; + + vmmcsd_fixed: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vmmcsd_fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&am33xx_pinmux { + pinctrl-names = "default"; + pinctrl-0 = <&userled_pins>; + + userled_pins: pinmux_userled_pins { + pinctrl-single,pins = < + 0x54 0x7 /* gpmc_a5.gpio1_21, OUTPUT | MODE7 */ + 0x58 0x17 /* gpmc_a6.gpio1_22, OUTPUT_PULLUP | MODE7 */ + 0x5c 0x7 /* gpmc_a7.gpio1_23, OUTPUT | MODE7 */ + 0x60 0x17 /* gpmc_a8.gpio1_24, OUTPUT_PULLUP | MODE7 */ + >; + }; + + can_bus_pins: pinmux_can_bus_pins { + pinctrl-single,pins = < + 0x120 0x31 /* DCAN0_RX MODE1 */ + 0x11c 0x01 /* DCAN0_TX MODE1 */ + >; + }; + + cpsw_default: cpsw_default { + pinctrl-single,pins = < + /* Slave 1 */ + 0x110 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxerr.mii1_rxerr */ + 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txen.mii1_txen */ + 0x118 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxdv.mii1_rxdv */ + 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd3.mii1_txd3 */ + 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd2.mii1_txd2 */ + 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd1.mii1_txd1 */ + 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd0.mii1_txd0 */ + 0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_txclk.mii1_txclk */ + 0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxclk.mii1_rxclk */ + 0x134 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd3.mii1_rxd3 */ + 0x138 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd2.mii1_rxd2 */ + 0x13c (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd1.mii1_rxd1 */ + 0x140 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd0.mii1_rxd0 */ + >; + }; + + cpsw_sleep: cpsw_sleep { + pinctrl-single,pins = < + /* Slave 1 reset value */ + 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + emac_rmii1_pins: pinmux_emac_rmii1_pins { + pinctrl-single,pins = < + 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs_dv */ + 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxerr.rmii1_rxerr */ + 0x114 (PIN_OUTPUT | MUX_MODE1) /* mii1_txen.rmii1_txen */ + 0x124 (PIN_OUTPUT | MUX_MODE1) /* mii1_txd1.rmii1_txd1 */ + 0x128 (PIN_OUTPUT | MUX_MODE1) /* mii1_txd0.rmii1_txd0 */ + 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */ + 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */ + 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii1_refclk.rmii1_refclk */ + >; + }; + + davinci_mdio_default: davinci_mdio_default { + pinctrl-single,pins = < + /* MDIO */ + 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ + 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + >; + }; + + davinci_mdio_sleep: davinci_mdio_sleep { + pinctrl-single,pins = < + /* MDIO reset value */ + 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + i2c0_pins: pinmux_i2c0_pins { + pinctrl-single,pins = < + 0x188 0x70 /* i2c0_sda, SLEWCTRL_SLOW | INPUT_PULLUP | MODE0 */ + 0x18c 0x70 /* i2c0_scl, SLEWCTRL_SLOW | INPUT_PULLUP | MODE0 */ + >; + }; + + i2c1_pins: pinmux_i2c1_pins { + pinctrl-single,pins = < + 0x158 0x72 /*spi0_d1-i2c1_sda,SLEWCTRL_SLOW | INPUT_PULLUP | MODE2*/ + 0x15c 0x72 /*spi0_cs0-i2c1_scl,SLEWCTRL_SLOW | INPUT_PULLUP |MODE2*/ + >; + }; + + i2c2_pins: pinmux_i2c2_pins { + pinctrl-single,pins = < + 0x150 0x72 /*spi0_scl.i2c2_sda,SLEWCTRL_SLOW | INPUT_PULLUP |MODE2*/ + 0x154 0x72 /*spi0_d0.i2c2_scl,SLEWCTRL_SLOW | INPUT_PULLUP | MODE2*/ + >; + }; + + mmc1_pins_default: pinmux_mmc1_pins { + pinctrl-single,pins = < + 0x0F0 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */ + 0x0F4 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */ + 0x0F8 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */ + 0x0FC (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */ + 0x100 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */ + 0x104 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */ + 0x1A0 (PIN_INPUT_PULLUP | MUX_MODE7) /* mcasp0_aclkr.gpio3_18 */ + 0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */ + >; + }; + + mmc1_pins_sleep: pinmux_mmc1_pins_sleep { + pinctrl-single,pins = < + 0x0F0 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x0F4 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x0F8 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x0FC (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x100 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x104 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x1A0 (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + tre_ehrpwm1_pins: pinmux_tre_ehrpwm1_pins { + pinctrl-single,pins = < + 0x48 0x06 /* PWM1A ~102 MODE6 */ + 0x4c 0x06 /* PWM1B ~103 MODE6 */ + >; + }; + + tre_ehrpwm2_pins: pinmux_tre_ehrpwm2_pins { + pinctrl-single,pins = < + 0x20 0x04 /* PWM2A ~100 MODE4 */ + 0x24 0x04 /* PWM2B ~101 MODE4 */ + >; + }; + + nxp_hdmi_bonelt_pins: nxp_hdmi_bonelt_pins { + pinctrl-single,pins = < + 0x1b0 0x03 /* xdma_event_intr0, OMAP_MUX_MODE3 | AM33XX_PIN_OUTPUT */ + 0xa0 0x08 /* lcd_data0.lcd_data0, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xa4 0x08 /* lcd_data1.lcd_data1, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xa8 0x08 /* lcd_data2.lcd_data2, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xac 0x08 /* lcd_data3.lcd_data3, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xb0 0x08 /* lcd_data4.lcd_data4, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xb4 0x08 /* lcd_data5.lcd_data5, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xb8 0x08 /* lcd_data6.lcd_data6, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xbc 0x08 /* lcd_data7.lcd_data7, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xc0 0x08 /* lcd_data8.lcd_data8, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xc4 0x08 /* lcd_data9.lcd_data9, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xc8 0x08 /* lcd_data10.lcd_data10, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xcc 0x08 /* lcd_data11.lcd_data11, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xd0 0x08 /* lcd_data12.lcd_data12, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xd4 0x08 /* lcd_data13.lcd_data13, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xd8 0x08 /* lcd_data14.lcd_data14, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xdc 0x08 /* lcd_data15.lcd_data15, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xe0 0x00 /* lcd_vsync.lcd_vsync, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ + 0xe4 0x00 /* lcd_hsync.lcd_hsync, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ + 0xe8 0x00 /* lcd_pclk.lcd_pclk, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ + 0xec 0x00 /* lcd_ac_bias_en.lcd_ac_bias_en, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ + >; + }; + + nxp_hdmi_bonelt_off_pins: nxp_hdmi_bonelt_off_pins { + pinctrl-single,pins = < + 0x1b0 0x03 /* xdma_event_intr0, OMAP_MUX_MODE3 | AM33XX_PIN_OUTPUT */ + >; + }; + + tre_audio_pins: pinmux_tre_audio_pins { + pinctrl-single,pins = < + 0x1ac 0x00 /*mcasp0_ahclkx (AUD_MCLK)->12MHz, INPUT | MODE0*/ + 0x190 0x20 /* mcasp0_aclkx (AUD_BCLK)->, INPUT | MODE0*/ + 0x194 0x20 /* mcasp0_fsx (AUD_FSX)-> , INPUT | MODE0*/ + 0x198 0x20 /* mcasp0_axr0 (AUD_DIN)<-, INPUT | MODE0*/ + 0x19c 0x22 /* mcasp0_ahclkr-_axr2 (AUD_DOUT)->, | MODE2*/ + >; + }; + + spi1_pins: pinmux_spi1_pins { + pinctrl-single,pins = < + 0x168 0x14 /* MOSI1 OUTPUT_PULLUP | MODE0 */ + 0x16c 0x34 /* MISO1 INPUT_PULLUP | MODE0 */ + 0x108 0x12 /* SCK1 OUTPUT_PULLUP | MODE0 */ + 0x164 0x12 /* SS1 OUTPUT_PULLUP | MODE0 */ + >; + }; + + uart0_pins: pinmux_uart0_pins { + pinctrl-single,pins = < + 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ + 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + >; + }; + + uart1_pins: pinmux_uart1_pins { + pinctrl-single,pins = < + 0x180 0x30 /* UART1_rxd PULL_UP | MODE0 */ + 0x184 0x00 /* UART1_txd MODE0 */ + >; + }; + + uart2_pins: pinmux_uart2_pins { + pinctrl-single,pins = < + 0x12c 0x31 /* UART2_rxd PULL_UP | MODE1 */ + 0x130 0x01 /* UART2_txd MODE1 */ + >; + }; + + uart4_pins: pinmux_uart4_pins { + pinctrl-single,pins = < + 0x70 0x36 /* UART4_rxd PULL_UP | MODE6 */ + 0x74 0x06 /* UART4_txd MODE6 */ + >; + }; +}; + +&dcan0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&can_bus_pins>; +}; + +&i2c0 { + status = "okay"; + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + + tps: tps@24 { + reg = <0x24>; + }; + + rtc@6f { + compatible = "microchip,mcp7941x"; + reg = <0x6f>; + }; + + tlv320aic3x: tlv320aic3x@18 { + compatible = "ti,tlv320aic3x"; + reg = <0x18>; + status = "okay"; + }; +}; + +&i2c1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + + clock-frequency = <100000>; +}; + +&i2c2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + + clock-frequency = <100000>; +}; + +&epwmss1 { + status = "okay"; +}; + +&ehrpwm1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&tre_ehrpwm1_pins>; +}; + +&epwmss2 { + status = "okay"; +}; + +&ehrpwm2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&tre_ehrpwm2_pins>; +}; + +&lcdc { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins>; + + status = "okay"; +}; + +&usb { + status = "okay"; + + control@44e10620 { + status = "okay"; + }; + + usb-phy@47401300 { + status = "okay"; + }; + + usb-phy@47401b00 { + status = "okay"; + }; + + usb@47401000 { + status = "okay"; + dr_mode = "peripheral"; + }; + + usb@47401800 { + status = "okay"; + dr_mode = "host"; + }; + + dma-controller@47402000 { + status = "okay"; + }; +}; + +&tps { + compatible = "ti,tps65217"; + ti,pmic-shutdown-controller; + + interrupt-parent = <&intc>; + interrupts = <7>; /* NNMI */ + + regulators { + #address-cells = <1>; + #size-cells = <0>; + + dcdc1_reg: regulator@0 { + reg = <0>; + regulator-name = "vdd_ddr"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-boot-on; + regulator-always-on; + }; + + dcdc2_reg: regulator@1 { + reg = <1>; + /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */ + regulator-name = "vdd_mpu"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <1325000>; + regulator-boot-on; + regulator-always-on; + }; + + dcdc3_reg: regulator@2 { + reg = <2>; + /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */ + regulator-name = "vdd_core"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <1150000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1_reg: regulator@3 { + reg = <3>; + regulator-always-on; + }; + + ldo2_reg: regulator@4 { + reg = <4>; + regulator-always-on; + }; + + ldo3_reg: regulator@5 { + reg = <5>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo4_reg: regulator@6 { + reg = <6>; + regulator-always-on; + }; + + rtc@44e3e000 { + ti,system-power-controller; + }; + }; +}; + +&mcasp0 { + pinctrl-names = "default"; + pinctrl-0 = <&tre_audio_pins>; + + status = "okay"; + + op-mode = <0>; /* MCASP_IIS_MODE */ + tdm-slots = <2>; + num-serializer = <16>; + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 2 0 1 0 + 0 0 0 0 + 0 0 0 0 + 0 0 0 0 + >; + tx-num-evt = <1>; + rx-num-evt = <1>; +}; + +&mac { + slaves = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&emac_rmii1_pins>; + status = "okay"; +}; + +&davinci_mdio { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&davinci_mdio_default>; + pinctrl-1 = <&davinci_mdio_sleep>; + status = "okay"; +}; + +&cpsw_emac0 { + phy_id = <&davinci_mdio>, <0>; + phy-mode = "rmii"; +}; + +&phy_sel { + rmii-clock-ext; +}; + +&mmc1 { + status = "okay"; + bus-width = <0x4>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mmc1_pins_default>; + pinctrl-1 = <&mmc1_pins_sleep>; + cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; + cd-inverted; + vmmc-supply = <&vmmcsd_fixed>; +}; + +&rtc { + system-power-controller; +}; + +&sham { + status = "okay"; +}; + +&aes { + status = "okay"; +}; diff --git b/arch/arm/boot/dts/am335x-bone-argus.dtsi b/arch/arm/boot/dts/am335x-bone-argus.dtsi new file mode 100644 index 0000000..21afad3 --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-argus.dtsi @@ -0,0 +1,109 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include + +/ { + ocp { + P8_07_pinmux { + /* gpio2[2] */ + status = "disabled"; + }; + P8_08_pinmux { + /* gpio2[3] */ + status = "disabled"; + }; + P8_09_pinmux { + /* gpio2[5] */ + status = "disabled"; + }; + P8_10_pinmux { + /* gpio2[4] */ + status = "disabled"; + }; + P9_11_pinmux { + /* gpio0[30] */ + status = "disabled"; + }; + P9_17_pinmux { + /* gpio0[5] */ + status = "disabled"; + }; + P9_18_pinmux { + /* gpio0[4] */ + status = "disabled"; + }; + P9_41_pinmux { + /* gpio0[20] */ + status = "disabled"; + }; + P9_42_pinmux { + /* gpio0[7] */ + status = "disabled"; + }; + }; +}; + +/ { + argus-ups { + compatible = "argus-ups"; + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&argus_ups_pins>; /* Refer to previous label */ + /* This section communicates the gpio numbers to the driver module */ + /* Note that gpio controllers appear to be numbered from 1-n here rather than 0-(n-1)????? */ + gpios = <&gpio0 30 0>, /* Request */ + <&gpio0 5 0>, /* Acknowledge */ + <&gpio0 4 0>, /* Watchdog */ + <&gpio2 2 0>, /* LED 1 Green */ + <&gpio2 3 0>, /* LED 1 Red */ + <&gpio2 5 0>, /* LED 2 Green */ + <&gpio2 4 0>, /* LED 2 Red */ + <&gpio0 20 0>, /* General Output #1 */ + <&gpio0 7 0>; /* General Output #2 */ + debug = <1>; + shutdown = <1>; + }; +}; + +&am33xx_pinmux { + argus_ups_pins: pinmux_argus_ups_pins { /* Set up pinmux */ + pinctrl-single,pins = < + 0x070 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_wait0.gpio0_30 */ + 0x15c (PIN_OUTPUT_PULLUP | MUX_MODE7) /* spi0_cs0.gpio0_5 */ + 0x158 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* spi0_d1.gpio0_4 */ + 0x090 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_advn_ale.gpio_2 */ + 0x094 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_oen_ren.gpio2_3 */ + 0x09c (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_ben0_cle.gpio2_5 */ + 0x098 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_gpmc_wen.gpio2_4 */ + 0x1b4 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* xdma_event_intr1.gpio0_20 */ + 0x164 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* ecap0_in_pwm0_out.gpio0_7 */ + >; + }; + + i2c2_pins: pinmux_i2c2_pins { + pinctrl-single,pins = < + BONE_P9_20 0x73 /* (SLEWCTRL_SLOW | PIN_INPUT_PULLUP | MUX_MODE3) uart1_ctsn.i2c2_sda */ + BONE_P9_19 0x73 /* (SLEWCTRL_SLOW | PIN_INPUT_PULLUP | MUX_MODE3) uart1_rtsn.i2c2_scl */ + >; + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + + status = "okay"; + clock-frequency = <100000>; + + rtc@68 { + compatible = "maxim,ds1307"; + reg = <0x68>; + }; +}; diff --git b/arch/arm/boot/dts/am335x-bone-cape-bone-argus.dts b/arch/arm/boot/dts/am335x-bone-cape-bone-argus.dts new file mode 100644 index 0000000..82218f5 --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-cape-bone-argus.dts @@ -0,0 +1,28 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am335x-bone-common-no-capemgr.dtsi" + +/ { + model = "TI AM335x BeagleBone"; + compatible = "ti,am335x-bone", "ti,am33xx"; +}; + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&ldo3_reg>; +}; + +#include "am335x-bone-argus.dtsi" diff --git b/arch/arm/boot/dts/am335x-bone-common-no-capemgr.dtsi b/arch/arm/boot/dts/am335x-bone-common-no-capemgr.dtsi new file mode 100644 index 0000000..cfb17df --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-common-no-capemgr.dtsi @@ -0,0 +1,348 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/ { + cpus { + cpu@0 { + cpu0-supply = <&dcdc2_reg>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x10000000>; /* 256 MB */ + }; + + chosen { + stdout-path = &uart0; + }; + + leds { + pinctrl-names = "default"; + pinctrl-0 = <&user_leds_s0>; + + compatible = "gpio-leds"; + + led@2 { + label = "beaglebone:green:usr0"; + gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + + led@3 { + label = "beaglebone:green:usr1"; + gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + + led@4 { + label = "beaglebone:green:usr2"; + gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "cpu0"; + default-state = "off"; + }; + + led@5 { + label = "beaglebone:green:usr3"; + gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc1"; + default-state = "off"; + }; + }; + + vmmcsd_fixed: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vmmcsd_fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&am33xx_pinmux { + user_leds_s0: user_leds_s0 { + pinctrl-single,pins = < + AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */ + AM33XX_IOPAD(0x858, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a6.gpio1_22 */ + AM33XX_IOPAD(0x85c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a7.gpio1_23 */ + AM33XX_IOPAD(0x860, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a8.gpio1_24 */ + >; + }; + + i2c0_pins: pinmux_i2c0_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ + AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + >; + }; + + i2c2_pins: pinmux_i2c2_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_ctsn.i2c2_sda */ + AM33XX_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_rtsn.i2c2_scl */ + >; + }; + + uart0_pins: pinmux_uart0_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ + AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + >; + }; + + cpsw_default: cpsw_default { + pinctrl-single,pins = < + /* Slave 1 */ + 0x108 (PIN_INPUT | MUX_MODE0) /* mii1_col.mii1_col */ + 0x10c (PIN_INPUT | MUX_MODE0) /* mii1_crs.mii1_crs */ + AM33XX_IOPAD(0x910, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxerr.mii1_rxerr */ + AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txen.mii1_txen */ + AM33XX_IOPAD(0x918, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxdv.mii1_rxdv */ + AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd3.mii1_txd3 */ + AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd2.mii1_txd2 */ + AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd1.mii1_txd1 */ + AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd0.mii1_txd0 */ + AM33XX_IOPAD(0x92c, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_txclk.mii1_txclk */ + AM33XX_IOPAD(0x930, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxclk.mii1_rxclk */ + AM33XX_IOPAD(0x934, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd3.mii1_rxd3 */ + AM33XX_IOPAD(0x938, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd2.mii1_rxd2 */ + AM33XX_IOPAD(0x93c, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd1.mii1_rxd1 */ + AM33XX_IOPAD(0x940, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd0.mii1_rxd0 */ + >; + }; + + cpsw_sleep: cpsw_sleep { + pinctrl-single,pins = < + /* Slave 1 reset value */ + 0x108 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + davinci_mdio_default: davinci_mdio_default { + pinctrl-single,pins = < + /* MDIO */ + AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ + AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + >; + }; + + davinci_mdio_sleep: davinci_mdio_sleep { + pinctrl-single,pins = < + /* MDIO reset value */ + AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* GPIO0_6 */ + >; + }; + + emmc_pins: pinmux_emmc_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */ + AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ + AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */ + AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */ + AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */ + AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */ + AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */ + AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */ + AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */ + AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */ + >; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + + status = "okay"; +}; + +&usb { + status = "okay"; +}; + +&usb_ctrl_mod { + status = "okay"; +}; + +&usb0_phy { + status = "okay"; +}; + +&usb1_phy { + status = "okay"; +}; + +&usb0 { + status = "okay"; + dr_mode = "peripheral"; +}; + +&usb1 { + status = "okay"; + dr_mode = "host"; +}; + +&cppi41dma { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + + status = "okay"; + clock-frequency = <400000>; + + tps: tps@24 { + reg = <0x24>; + }; + + baseboard_eeprom: baseboard_eeprom@50 { + compatible = "at,24c256"; + reg = <0x50>; + + #address-cells = <1>; + #size-cells = <1>; + baseboard_data: baseboard_data@0 { + reg = <0 0x100>; + }; + }; +}; + +/include/ "tps65217.dtsi" + +&tps { + /* + * Configure pmic to enter OFF-state instead of SLEEP-state ("RTC-only + * mode") at poweroff. Most BeagleBone versions do not support RTC-only + * mode and risk hardware damage if this mode is entered. + * + * For details, see linux-omap mailing list May 2015 thread + * [PATCH] ARM: dts: am335x-bone* enable pmic-shutdown-controller + * In particular, messages: + * http://www.spinics.net/lists/linux-omap/msg118585.html + * http://www.spinics.net/lists/linux-omap/msg118615.html + * + * You can override this later with + * &tps { /delete-property/ ti,pmic-shutdown-controller; } + * if you want to use RTC-only mode and made sure you are not affected + * by the hardware problems. (Tip: double-check by performing a current + * measurement after shutdown: it should be less than 1 mA.) + */ + ti,pmic-shutdown-controller; + + interrupt-parent = <&intc>; + interrupts = <7>; /* NNMI */ + + regulators { + dcdc1_reg: regulator@0 { + regulator-name = "vdds_dpr"; + regulator-always-on; + }; + + dcdc2_reg: regulator@1 { + /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */ + regulator-name = "vdd_mpu"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <1351500>; + regulator-boot-on; + regulator-always-on; + }; + + dcdc3_reg: regulator@2 { + /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */ + regulator-name = "vdd_core"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <1150000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1_reg: regulator@3 { + regulator-name = "vio,vrtc,vdds"; + regulator-always-on; + }; + + ldo2_reg: regulator@4 { + regulator-name = "vdd_3v3aux"; + regulator-always-on; + }; + + ldo3_reg: regulator@5 { + regulator-name = "vdd_1v8"; + regulator-always-on; + }; + + ldo4_reg: regulator@6 { + regulator-name = "vdd_3v3a"; + regulator-always-on; + }; + }; +}; + +&cpsw_emac0 { + phy_id = <&davinci_mdio>, <0>; + phy-mode = "mii"; +}; + +&mac { + slaves = <1>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cpsw_default>; + pinctrl-1 = <&cpsw_sleep>; + status = "okay"; +}; + +&davinci_mdio { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&davinci_mdio_default>; + pinctrl-1 = <&davinci_mdio_sleep>; + status = "okay"; +}; + +&mmc1 { + status = "okay"; + bus-width = <0x4>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; +}; + +&aes { + status = "okay"; +}; + +&sham { + status = "okay"; +}; + +&rtc { + system-power-controller; +}; diff --git b/arch/arm/boot/dts/am335x-bone-common-universal-pins.dtsi b/arch/arm/boot/dts/am335x-bone-common-universal-pins.dtsi new file mode 100644 index 0000000..e4d4971 --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-common-universal-pins.dtsi @@ -0,0 +1,941 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&am33xx_pinmux { + /************************/ + /* P8 Header */ + /************************/ + + /* P8_01 GND */ + /* P8_02 GND */ + /* P8_03 (ZCZ ball R9 ) emmc */ + /* P8_04 (ZCZ ball T9 ) emmc */ + /* P8_05 (ZCZ ball R8 ) emmc */ + /* P8_06 (ZCZ ball T8 ) emmc */ + + /* P8_07 (ZCZ ball R7 ) */ + P8_07_default_pin: pinmux_P8_07_default_pin { + pinctrl-single,pins = <0x090 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_07_gpio_pin: pinmux_P8_07_gpio_pin { + pinctrl-single,pins = <0x090 0x2F>; }; /* Mode 7, RxActive */ + P8_07_gpio_pu_pin: pinmux_P8_07_gpio_pu_pin { + pinctrl-single,pins = <0x090 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_07_gpio_pd_pin: pinmux_P8_07_gpio_pd_pin { + pinctrl-single,pins = <0x090 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_07_timer_pin: pinmux_P8_07_timer_pin { + pinctrl-single,pins = <0x090 0x32>; }; /* Mode 2, Pull-Up, RxActive */ + + /* P8_08 (ZCZ ball T7 ) */ + P8_08_default_pin: pinmux_P8_08_default_pin { + pinctrl-single,pins = <0x094 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_08_gpio_pin: pinmux_P8_08_gpio_pin { + pinctrl-single,pins = <0x094 0x2F>; }; /* Mode 7, RxActive */ + P8_08_gpio_pu_pin: pinmux_P8_08_gpio_pu_pin { + pinctrl-single,pins = <0x094 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_08_gpio_pd_pin: pinmux_P8_08_gpio_pd_pin { + pinctrl-single,pins = <0x094 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_08_timer_pin: pinmux_P8_08_timer_pin { + pinctrl-single,pins = <0x094 0x32>; }; /* Mode 2, Pull-Up, RxActive */ + + /* P8_09 (ZCZ ball T6 ) */ + P8_09_default_pin: pinmux_P8_09_default_pin { + pinctrl-single,pins = <0x09c 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_09_gpio_pin: pinmux_P8_09_gpio_pin { + pinctrl-single,pins = <0x09c 0x2F>; }; /* Mode 7, RxActive */ + P8_09_gpio_pu_pin: pinmux_P8_09_gpio_pu_pin { + pinctrl-single,pins = <0x09c 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_09_gpio_pd_pin: pinmux_P8_09_gpio_pd_pin { + pinctrl-single,pins = <0x09c 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_09_timer_pin: pinmux_P8_09_timer_pin { + pinctrl-single,pins = <0x09c 0x32>; }; /* Mode 2, Pull-Up, RxActive */ + + /* P8_10 (ZCZ ball U6 ) */ + P8_10_default_pin: pinmux_P8_10_default_pin { + pinctrl-single,pins = <0x098 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_10_gpio_pin: pinmux_P8_10_gpio_pin { + pinctrl-single,pins = <0x098 0x2F>; }; /* Mode 7, RxActive */ + P8_10_gpio_pu_pin: pinmux_P8_10_gpio_pu_pin { + pinctrl-single,pins = <0x098 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_10_gpio_pd_pin: pinmux_P8_10_gpio_pd_pin { + pinctrl-single,pins = <0x098 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_10_timer_pin: pinmux_P8_10_timer_pin { + pinctrl-single,pins = <0x098 0x32>; }; /* Mode 2, Pull-Up, RxActive */ + + /* P8_11 (ZCZ ball R12) */ + P8_11_default_pin: pinmux_P8_11_default_pin { + pinctrl-single,pins = <0x034 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_11_gpio_pin: pinmux_P8_11_gpio_pin { + pinctrl-single,pins = <0x034 0x2F>; }; /* Mode 7, RxActive */ + P8_11_gpio_pu_pin: pinmux_P8_11_gpio_pu_pin { + pinctrl-single,pins = <0x034 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_11_gpio_pd_pin: pinmux_P8_11_gpio_pd_pin { + pinctrl-single,pins = <0x034 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_11_pruout_pin: pinmux_P8_11_pruout_pin { + pinctrl-single,pins = <0x034 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_11_qep_pin: pinmux_P8_11_qep_pin { + pinctrl-single,pins = <0x034 0x24>; }; /* Mode 4, Pull-Down, RxActive */ + + /* P8_12 (ZCZ ball T12) */ + P8_12_default_pin: pinmux_P8_12_default_pin { + pinctrl-single,pins = <0x030 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_12_gpio_pin: pinmux_P8_12_gpio_pin { + pinctrl-single,pins = <0x030 0x2F>; }; /* Mode 7, RxActive */ + P8_12_gpio_pu_pin: pinmux_P8_12_gpio_pu_pin { + pinctrl-single,pins = <0x030 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_12_gpio_pd_pin: pinmux_P8_12_gpio_pd_pin { + pinctrl-single,pins = <0x030 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_12_pruout_pin: pinmux_P8_12_pruout_pin { + pinctrl-single,pins = <0x030 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_12_qep_pin: pinmux_P8_12_qep_pin { + pinctrl-single,pins = <0x030 0x24>; }; /* Mode 4, Pull-Down, RxActive */ + + /* P8_13 (ZCZ ball T10) */ + P8_13_default_pin: pinmux_P8_13_default_pin { + pinctrl-single,pins = <0x024 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_13_gpio_pin: pinmux_P8_13_gpio_pin { + pinctrl-single,pins = <0x024 0x2F>; }; /* Mode 7, RxActive */ + P8_13_gpio_pu_pin: pinmux_P8_13_gpio_pu_pin { + pinctrl-single,pins = <0x024 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_13_gpio_pd_pin: pinmux_P8_13_gpio_pd_pin { + pinctrl-single,pins = <0x024 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_13_pwm_pin: pinmux_P8_13_pwm_pin { + pinctrl-single,pins = <0x024 0x24>; }; /* Mode 4, Pull-Down, RxActive */ + + /* P8_14 (ZCZ ball T11) */ + P8_14_default_pin: pinmux_P8_14_default_pin { + pinctrl-single,pins = <0x028 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_14_gpio_pin: pinmux_P8_14_gpio_pin { + pinctrl-single,pins = <0x028 0x2F>; }; /* Mode 7, RxActive */ + P8_14_gpio_pu_pin: pinmux_P8_14_gpio_pu_pin { + pinctrl-single,pins = <0x028 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_14_gpio_pd_pin: pinmux_P8_14_gpio_pd_pin { + pinctrl-single,pins = <0x028 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_14_pwm_pin: pinmux_P8_14_pwm_pin { + pinctrl-single,pins = <0x028 0x24>; }; /* Mode 4, Pull-Down, RxActive */ + + /* P8_15 (ZCZ ball U13) */ + P8_15_default_pin: pinmux_P8_15_default_pin { + pinctrl-single,pins = <0x03c 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_15_gpio_pin: pinmux_P8_15_gpio_pin { + pinctrl-single,pins = <0x03c 0x2F>; }; /* Mode 7, RxActive */ + P8_15_gpio_pu_pin: pinmux_P8_15_gpio_pu_pin { + pinctrl-single,pins = <0x03c 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_15_gpio_pd_pin: pinmux_P8_15_gpio_pd_pin { + pinctrl-single,pins = <0x03c 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_15_pruin_pin: pinmux_P8_15_pruin_pin { + pinctrl-single,pins = <0x03c 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_15_qep_pin: pinmux_P8_15_qep_pin { + pinctrl-single,pins = <0x03c 0x24>; }; /* Mode 4, Pull-Down, RxActive */ + + /* P8_16 (ZCZ ball V13) */ + P8_16_default_pin: pinmux_P8_16_default_pin { + pinctrl-single,pins = <0x038 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_16_gpio_pin: pinmux_P8_16_gpio_pin { + pinctrl-single,pins = <0x038 0x2F>; }; /* Mode 7, RxActive */ + P8_16_gpio_pu_pin: pinmux_P8_16_gpio_pu_pin { + pinctrl-single,pins = <0x038 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_16_gpio_pd_pin: pinmux_P8_16_gpio_pd_pin { + pinctrl-single,pins = <0x038 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_16_pruin_pin: pinmux_P8_16_pruin_pin { + pinctrl-single,pins = <0x038 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_16_qep_pin: pinmux_P8_16_qep_pin { + pinctrl-single,pins = <0x038 0x24>; }; /* Mode 4, Pull-Down, RxActive */ + + /* P8_17 (ZCZ ball U12) */ + P8_17_default_pin: pinmux_P8_17_default_pin { + pinctrl-single,pins = <0x02c 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_17_gpio_pin: pinmux_P8_17_gpio_pin { + pinctrl-single,pins = <0x02c 0x2F>; }; /* Mode 7, RxActive */ + P8_17_gpio_pu_pin: pinmux_P8_17_gpio_pu_pin { + pinctrl-single,pins = <0x02c 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_17_gpio_pd_pin: pinmux_P8_17_gpio_pd_pin { + pinctrl-single,pins = <0x02c 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_17_pwm_pin: pinmux_P8_17_pwm_pin { + pinctrl-single,pins = <0x02c 0x24>; }; /* Mode 4, Pull-Down, RxActive */ + + /* P8_18 (ZCZ ball V12) */ + P8_18_default_pin: pinmux_P8_18_default_pin { + pinctrl-single,pins = <0x08c 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_18_gpio_pin: pinmux_P8_18_gpio_pin { + pinctrl-single,pins = <0x08c 0x2F>; }; /* Mode 7, RxActive */ + P8_18_gpio_pu_pin: pinmux_P8_18_gpio_pu_pin { + pinctrl-single,pins = <0x08c 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_18_gpio_pd_pin: pinmux_P8_18_gpio_pd_pin { + pinctrl-single,pins = <0x08c 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + + /* P8_19 (ZCZ ball U10) */ + P8_19_default_pin: pinmux_P8_19_default_pin { + pinctrl-single,pins = <0x020 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_19_gpio_pin: pinmux_P8_19_gpio_pin { + pinctrl-single,pins = <0x020 0x2F>; }; /* Mode 7, RxActive */ + P8_19_gpio_pu_pin: pinmux_P8_19_gpio_pu_pin { + pinctrl-single,pins = <0x020 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_19_gpio_pd_pin: pinmux_P8_19_gpio_pd_pin { + pinctrl-single,pins = <0x020 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_19_pwm_pin: pinmux_P8_19_pwm_pin { + pinctrl-single,pins = <0x020 0x24>; }; /* Mode 4, Pull-Down, RxActive */ + + /* P8_20 (ZCZ ball V9 ) emmc */ + /* P8_21 (ZCZ ball U9 ) emmc */ + /* P8_22 (ZCZ ball V8 ) emmc */ + /* P8_23 (ZCZ ball U8 ) emmc */ + /* P8_24 (ZCZ ball V7 ) emmc */ + /* P8_25 (ZCZ ball U7 ) emmc */ + + /* P8_26 (ZCZ ball V6 ) */ + P8_26_default_pin: pinmux_P8_26_default_pin { + pinctrl-single,pins = <0x07c 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_26_gpio_pin: pinmux_P8_26_gpio_pin { + pinctrl-single,pins = <0x07c 0x2F>; }; /* Mode 7, RxActive */ + P8_26_gpio_pu_pin: pinmux_P8_26_gpio_pu_pin { + pinctrl-single,pins = <0x07c 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_26_gpio_pd_pin: pinmux_P8_26_gpio_pd_pin { + pinctrl-single,pins = <0x07c 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + + /* P8_27 (ZCZ ball U5 ) hdmi */ + P8_27_default_pin: pinmux_P8_27_default_pin { + pinctrl-single,pins = <0x0e0 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_27_gpio_pin: pinmux_P8_27_gpio_pin { + pinctrl-single,pins = <0x0e0 0x2F>; }; /* Mode 7, RxActive */ + P8_27_gpio_pu_pin: pinmux_P8_27_gpio_pu_pin { + pinctrl-single,pins = <0x0e0 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_27_gpio_pd_pin: pinmux_P8_27_gpio_pd_pin { + pinctrl-single,pins = <0x0e0 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_27_pruout_pin: pinmux_P8_27_pruout_pin { + pinctrl-single,pins = <0x0e0 0x05>; }; /* Mode 5, Pull-Down*/ + P8_27_pruin_pin: pinmux_P8_27_pruin_pin { + pinctrl-single,pins = <0x0e0 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_27_hdmi_pin: pinmux_P8_27_hdmi_pin { + pinctrl-single,pins = <0x0e0 0x00>; }; /* lcd_vsync.lcd_vsync, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ + + /* P8_28 (ZCZ ball V5 ) hdmi */ + P8_28_default_pin: pinmux_P8_28_default_pin { + pinctrl-single,pins = <0x0e8 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_28_gpio_pin: pinmux_P8_28_gpio_pin { + pinctrl-single,pins = <0x0e8 0x2F>; }; /* Mode 7, RxActive */ + P8_28_gpio_pu_pin: pinmux_P8_28_gpio_pu_pin { + pinctrl-single,pins = <0x0e8 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_28_gpio_pd_pin: pinmux_P8_28_gpio_pd_pin { + pinctrl-single,pins = <0x0e8 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_28_pruout_pin: pinmux_P8_28_pruout_pin { + pinctrl-single,pins = <0x0e8 0x05>; }; /* Mode 5, Pull-Down */ + P8_28_pruin_pin: pinmux_P8_28_pruin_pin { + pinctrl-single,pins = <0x0e8 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_28_hdmi_pin: pinmux_P8_28_hdmi_pin { + pinctrl-single,pins = <0x0e8 0x00>; }; /* lcd_pclk.lcd_pclk, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ + + /* P8_29 (ZCZ ball R5 ) hdmi */ + P8_29_default_pin: pinmux_P8_29_default_pin { + pinctrl-single,pins = <0x0e4 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_29_gpio_pin: pinmux_P8_29_gpio_pin { + pinctrl-single,pins = <0x0e4 0x2F>; }; /* Mode 7, RxActive */ + P8_29_gpio_pu_pin: pinmux_P8_29_gpio_pu_pin { + pinctrl-single,pins = <0x0e4 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_29_gpio_pd_pin: pinmux_P8_29_gpio_pd_pin { + pinctrl-single,pins = <0x0e4 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_29_pruout_pin: pinmux_P8_29_pruout_pin { + pinctrl-single,pins = <0x0e4 0x05>; }; /* Mode 5, Pull-Down*/ + P8_29_pruin_pin: pinmux_P8_29_pruin_pin { + pinctrl-single,pins = <0x0e4 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_29_hdmi_pin: pinmux_P8_29_hdmi_pin { + pinctrl-single,pins = <0x0e4 0x00>; }; /* lcd_hsync.lcd_hsync, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ + + /* P8_30 (ZCZ ball R6 ) hdmi */ + P8_30_default_pin: pinmux_P8_30_default_pin { + pinctrl-single,pins = <0x0ec 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_30_gpio_pin: pinmux_P8_30_gpio_pin { + pinctrl-single,pins = <0x0ec 0x2F>; }; /* Mode 7, RxActive */ + P8_30_gpio_pu_pin: pinmux_P8_30_gpio_pu_pin { + pinctrl-single,pins = <0x0ec 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_30_gpio_pd_pin: pinmux_P8_30_gpio_pd_pin { + pinctrl-single,pins = <0x0ec 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_30_pruout_pin: pinmux_P8_30_pruout_pin { + pinctrl-single,pins = <0x0ec 0x05>; }; /* Mode 5, Pull-Down*/ + P8_30_pruin_pin: pinmux_P8_30_pruin_pin { + pinctrl-single,pins = <0x0ec 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_30_hdmi_pin: pinmux_P8_30_hdmi_pin { + pinctrl-single,pins = <0x0ec 0x00>; }; /* lcd_ac_bias_en.lcd_ac_bias_en, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ + + /* P8_31 (ZCZ ball V4 ) hdmi */ + P8_31_default_pin: pinmux_P8_31_default_pin { + pinctrl-single,pins = <0x0d8 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_31_gpio_pin: pinmux_P8_31_gpio_pin { + pinctrl-single,pins = <0x0d8 0x2F>; }; /* Mode 7, RxActive */ + P8_31_gpio_pu_pin: pinmux_P8_31_gpio_pu_pin { + pinctrl-single,pins = <0x0d8 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_31_gpio_pd_pin: pinmux_P8_31_gpio_pd_pin { + pinctrl-single,pins = <0x0d8 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_31_uart_pin: pinmux_P8_31_uart_pin { + pinctrl-single,pins = <0x0d8 0x24>; }; /* Mode 4, Pull-Down, RxActive */ + P8_31_hdmi_pin: pinmux_P8_31_hdmi_pin { + pinctrl-single,pins = <0x0d8 0x08>; }; /* lcd_data14.lcd_data14, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + + /* P8_32 (ZCZ ball T5 ) hdmi */ + P8_32_default_pin: pinmux_P8_32_default_pin { + pinctrl-single,pins = <0x0dc 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_32_gpio_pin: pinmux_P8_32_gpio_pin { + pinctrl-single,pins = <0x0dc 0x2F>; }; /* Mode 7, RxActive */ + P8_32_gpio_pu_pin: pinmux_P8_32_gpio_pu_pin { + pinctrl-single,pins = <0x0dc 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_32_gpio_pd_pin: pinmux_P8_32_gpio_pd_pin { + pinctrl-single,pins = <0x0dc 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_32_uart_pin: pinmux_P8_32_uart_pin { + pinctrl-single,pins = <0x0dc 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_32_hdmi_pin: pinmux_P8_32_hdmi_pin { + pinctrl-single,pins = <0x0dc 0x08>; }; /* lcd_data15.lcd_data15, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + + /* P8_33 (ZCZ ball V3 ) hdmi */ + P8_33_default_pin: pinmux_P8_33_default_pin { + pinctrl-single,pins = <0x0d4 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_33_gpio_pin: pinmux_P8_33_gpio_pin { + pinctrl-single,pins = <0x0d4 0x2F>; }; /* Mode 7, RxActive */ + P8_33_gpio_pu_pin: pinmux_P8_33_gpio_pu_pin { + pinctrl-single,pins = <0x0d4 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_33_gpio_pd_pin: pinmux_P8_33_gpio_pd_pin { + pinctrl-single,pins = <0x0d4 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_33_hdmi_pin: pinmux_P8_33_hdmi_pin { + pinctrl-single,pins = <0x0d4 0x08>; }; /* lcd_data13.lcd_data13, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + P8_33_qep_pin: pinmux_P8_33_qep_pin { + pinctrl-single,pins = <0x0d4 0x22>; }; /* Mode 2, Pull-Down, RxActive */ + + /* P8_34 (ZCZ ball U4 ) hdmi */ + P8_34_default_pin: pinmux_P8_34_default_pin { + pinctrl-single,pins = <0x0cc 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_34_gpio_pin: pinmux_P8_34_gpio_pin { + pinctrl-single,pins = <0x0cc 0x2F>; }; /* Mode 7, RxActive */ + P8_34_gpio_pu_pin: pinmux_P8_34_gpio_pu_pin { + pinctrl-single,pins = <0x0cc 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_34_gpio_pd_pin: pinmux_P8_34_gpio_pd_pin { + pinctrl-single,pins = <0x0cc 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_34_pwm_pin: pinmux_P8_34_pwm_pin { + pinctrl-single,pins = <0x0cc 0x22>; }; /* Mode 2, Pull-Down, RxActive */ + P8_34_hdmi_pin: pinmux_P8_34_hdmi_pin { + pinctrl-single,pins = <0x0cc 0x08>; }; /* lcd_data11.lcd_data11, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + + /* P8_35 (ZCZ ball V2 ) hdmi */ + P8_35_default_pin: pinmux_P8_35_default_pin { + pinctrl-single,pins = <0x0d0 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_35_gpio_pin: pinmux_P8_35_gpio_pin { + pinctrl-single,pins = <0x0d0 0x2F>; }; /* Mode 7, RxActive */ + P8_35_gpio_pu_pin: pinmux_P8_35_gpio_pu_pin { + pinctrl-single,pins = <0x0d0 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_35_gpio_pd_pin: pinmux_P8_35_gpio_pd_pin { + pinctrl-single,pins = <0x0d0 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_35_hdmi_pin: pinmux_P8_35_hdmi_pin { + pinctrl-single,pins = <0x0d0 0x08>; }; /* lcd_data12.lcd_data12, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + P8_35_qep_pin: pinmux_P8_35_qep_pin { + pinctrl-single,pins = <0x0d0 0x22>; }; /* Mode 2, Pull-Down, RxActive */ + + /* P8_36 (ZCZ ball U3 ) hdmi */ + P8_36_default_pin: pinmux_P8_36_default_pin { + pinctrl-single,pins = <0x0c8 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_36_gpio_pin: pinmux_P8_36_gpio_pin { + pinctrl-single,pins = <0x0c8 0x2F>; }; /* Mode 7, RxActive */ + P8_36_gpio_pu_pin: pinmux_P8_36_gpio_pu_pin { + pinctrl-single,pins = <0x0c8 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_36_gpio_pd_pin: pinmux_P8_36_gpio_pd_pin { + pinctrl-single,pins = <0x0c8 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_36_pwm_pin: pinmux_P8_36_pwm_pin { + pinctrl-single,pins = <0x0c8 0x22>; }; /* Mode 2, Pull-Down, RxActive */ + P8_36_hdmi_pin: pinmux_P8_36_hdmi_pin { + pinctrl-single,pins = <0x0c8 0x08>; }; /* lcd_data10.lcd_data10, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + + /* P8_37 (ZCZ ball U1 ) hdmi */ + P8_37_default_pin: pinmux_P8_37_default_pin { + pinctrl-single,pins = <0x0c0 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_37_gpio_pin: pinmux_P8_37_gpio_pin { + pinctrl-single,pins = <0x0c0 0x2F>; }; /* Mode 7, RxActive */ + P8_37_gpio_pu_pin: pinmux_P8_37_gpio_pu_pin { + pinctrl-single,pins = <0x0c0 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_37_gpio_pd_pin: pinmux_P8_37_gpio_pd_pin { + pinctrl-single,pins = <0x0c0 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_37_uart_pin: pinmux_P8_37_uart_pin { + pinctrl-single,pins = <0x0c0 0x04>; }; /* Mode 4, Pull-Down*/ + P8_37_pwm_pin: pinmux_P8_37_pwm_pin { + pinctrl-single,pins = <0x0c0 0x02>; }; /* Mode 2, Pull-Down*/ + P8_37_hdmi_pin: pinmux_P8_37_hdmi_pin { + pinctrl-single,pins = <0x0c0 0x08>; }; /* lcd_data8.lcd_data8, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + + + /* P8_38 (ZCZ ball U2 ) hdmi */ + P8_38_default_pin: pinmux_P8_38_default_pin { + pinctrl-single,pins = <0x0c4 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_38_gpio_pin: pinmux_P8_38_gpio_pin { + pinctrl-single,pins = <0x0c4 0x2F>; }; /* Mode 7, RxActive */ + P8_38_gpio_pu_pin: pinmux_P8_38_gpio_pu_pin { + pinctrl-single,pins = <0x0c4 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_38_gpio_pd_pin: pinmux_P8_38_gpio_pd_pin { + pinctrl-single,pins = <0x0c4 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_38_uart_pin: pinmux_P8_38_uart_pin { + pinctrl-single,pins = <0x0c4 0x24>; }; /* Mode 4, Pull-Down, RxActive */ + P8_38_pwm_pin: pinmux_P8_38_pwm_pin { + pinctrl-single,pins = <0x0c4 0x22>; }; /* Mode 2, Pull-Down, RxActive */ + P8_38_hdmi_pin: pinmux_P8_38_hdmi_pin { + pinctrl-single,pins = <0x0c4 0x08>; }; /* lcd_data9.lcd_data9, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + + + /* P8_39 (ZCZ ball T3 ) hdmi */ + P8_39_default_pin: pinmux_P8_39_default_pin { + pinctrl-single,pins = <0x0b8 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_39_gpio_pin: pinmux_P8_39_gpio_pin { + pinctrl-single,pins = <0x0b8 0x2F>; }; /* Mode 7, RxActive */ + P8_39_gpio_pu_pin: pinmux_P8_39_gpio_pu_pin { + pinctrl-single,pins = <0x0b8 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_39_gpio_pd_pin: pinmux_P8_39_gpio_pd_pin { + pinctrl-single,pins = <0x0b8 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_39_pruout_pin: pinmux_P8_39_pruout_pin { + pinctrl-single,pins = <0x0b8 0x05>; }; /* Mode 5, Pull-Down*/ + P8_39_pruin_pin: pinmux_P8_39_pruin_pin { + pinctrl-single,pins = <0x0b8 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_39_hdmi_pin: pinmux_P8_39_hdmi_pin { + pinctrl-single,pins = <0x0b8 0x08>; }; /* lcd_data6.lcd_data6, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + + /* P8_40 (ZCZ ball T4 ) hdmi */ + P8_40_default_pin: pinmux_P8_40_default_pin { + pinctrl-single,pins = <0x0bc 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_40_gpio_pin: pinmux_P8_40_gpio_pin { + pinctrl-single,pins = <0x0bc 0x2F>; }; /* Mode 7, RxActive */ + P8_40_gpio_pu_pin: pinmux_P8_40_gpio_pu_pin { + pinctrl-single,pins = <0x0bc 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_40_gpio_pd_pin: pinmux_P8_40_gpio_pd_pin { + pinctrl-single,pins = <0x0bc 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_40_pruout_pin: pinmux_P8_40_pruout_pin { + pinctrl-single,pins = <0x0bc 0x05>; }; /* Mode 5, Pull-Down*/ + P8_40_pruin_pin: pinmux_P8_40_pruin_pin { + pinctrl-single,pins = <0x0bc 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_40_hdmi_pin: pinmux_P8_40_hdmi_pin { + pinctrl-single,pins = <0x0bc 0x08>; }; /* lcd_data7.lcd_data7, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + + /* P8_41 (ZCZ ball T1 ) hdmi */ + P8_41_default_pin: pinmux_P8_41_default_pin { + pinctrl-single,pins = <0x0b0 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_41_gpio_pin: pinmux_P8_41_gpio_pin { + pinctrl-single,pins = <0x0b0 0x2F>; }; /* Mode 7, RxActive */ + P8_41_gpio_pu_pin: pinmux_P8_41_gpio_pu_pin { + pinctrl-single,pins = <0x0b0 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_41_gpio_pd_pin: pinmux_P8_41_gpio_pd_pin { + pinctrl-single,pins = <0x0b0 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_41_pruout_pin: pinmux_P8_41_pruout_pin { + pinctrl-single,pins = <0x0b0 0x05>; }; /* Mode 5, Pull-Down*/ + P8_41_pruin_pin: pinmux_P8_41_pruin_pin { + pinctrl-single,pins = <0x0b0 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_41_hdmi_pin: pinmux_P8_41_hdmi_pin { + pinctrl-single,pins = <0x0b0 0x08>; }; /* lcd_data4.lcd_data4, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + + /* P8_42 (ZCZ ball T2 ) hdmi */ + P8_42_default_pin: pinmux_P8_42_default_pin { + pinctrl-single,pins = <0x0b4 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_42_gpio_pin: pinmux_P8_42_gpio_pin { + pinctrl-single,pins = <0x0b4 0x2F>; }; /* Mode 7, RxActive */ + P8_42_gpio_pu_pin: pinmux_P8_42_gpio_pu_pin { + pinctrl-single,pins = <0x0b4 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_42_gpio_pd_pin: pinmux_P8_42_gpio_pd_pin { + pinctrl-single,pins = <0x0b4 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_42_pruout_pin: pinmux_P8_42_pruout_pin { + pinctrl-single,pins = <0x0b4 0x05>; }; /* Mode 5, Pull-Down*/ + P8_42_pruin_pin: pinmux_P8_42_pruin_pin { + pinctrl-single,pins = <0x0b4 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_42_hdmi_pin: pinmux_P8_42_hdmi_pin { + pinctrl-single,pins = <0x0b4 0x08>; }; /* lcd_data5.lcd_data5, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + + /* P8_43 (ZCZ ball R3 ) hdmi */ + P8_43_default_pin: pinmux_P8_43_default_pin { + pinctrl-single,pins = <0x0a8 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_43_gpio_pin: pinmux_P8_43_gpio_pin { + pinctrl-single,pins = <0x0a8 0x2F>; }; /* Mode 7, RxActive */ + P8_43_gpio_pu_pin: pinmux_P8_43_gpio_pu_pin { + pinctrl-single,pins = <0x0a8 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_43_gpio_pd_pin: pinmux_P8_43_gpio_pd_pin { + pinctrl-single,pins = <0x0a8 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_43_pruout_pin: pinmux_P8_43_pruout_pin { + pinctrl-single,pins = <0x0a8 0x05>; }; /* Mode 5, Pull-Down*/ + P8_43_pruin_pin: pinmux_P8_43_pruin_pin { + pinctrl-single,pins = <0x0a8 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_43_pwm_pin: pinmux_P8_43_pwm_pin { + pinctrl-single,pins = <0x0a8 0x03>; }; /* Mode 3, Pull-Down */ + P8_43_hdmi_pin: pinmux_P8_43_hdmi_pin { + pinctrl-single,pins = <0x0a8 0x08>; }; /* lcd_data2.lcd_data2, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + + /* P8_44 (ZCZ ball R4 ) hdmi */ + P8_44_default_pin: pinmux_P8_44_default_pin { + pinctrl-single,pins = <0x0ac 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_44_gpio_pin: pinmux_P8_44_gpio_pin { + pinctrl-single,pins = <0x0ac 0x2F>; }; /* Mode 7, RxActive */ + P8_44_gpio_pu_pin: pinmux_P8_44_gpio_pu_pin { + pinctrl-single,pins = <0x0ac 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_44_gpio_pd_pin: pinmux_P8_44_gpio_pd_pin { + pinctrl-single,pins = <0x0ac 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_44_pruout_pin: pinmux_P8_44_pruout_pin { + pinctrl-single,pins = <0x0ac 0x05>; }; /* Mode 5, Pull-Down*/ + P8_44_pruin_pin: pinmux_P8_44_pruin_pin { + pinctrl-single,pins = <0x0ac 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_44_pwm_pin: pinmux_P8_44_pwm_pin { + pinctrl-single,pins = <0x0ac 0x23>; }; /* Mode 3, Pull-Down, RxActive */ + P8_44_hdmi_pin: pinmux_P8_44_hdmi_pin { + pinctrl-single,pins = <0x0ac 0x08>; }; /* lcd_data3.lcd_data3, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + + /* P8_45 (ZCZ ball R1 ) hdmi */ + P8_45_default_pin: pinmux_P8_45_default_pin { + pinctrl-single,pins = <0x0a0 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_45_gpio_pin: pinmux_P8_45_gpio_pin { + pinctrl-single,pins = <0x0a0 0x2F>; }; /* Mode 7, RxActive */ + P8_45_gpio_pu_pin: pinmux_P8_45_gpio_pu_pin { + pinctrl-single,pins = <0x0a0 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_45_gpio_pd_pin: pinmux_P8_45_gpio_pd_pin { + pinctrl-single,pins = <0x0a0 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_45_pruout_pin: pinmux_P8_45_pruout_pin { + pinctrl-single,pins = <0x0a0 0x05>; }; /* Mode 5, Pull-Down*/ + P8_45_pruin_pin: pinmux_P8_45_pruin_pin { + pinctrl-single,pins = <0x0a0 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_45_pwm_pin: pinmux_P8_45_pwm_pin { + pinctrl-single,pins = <0x0a0 0x03>; }; /* Mode 3, Pull-Down*/ + P8_45_hdmi_pin: pinmux_P8_45_hdmi_pin { + pinctrl-single,pins = <0x0a0 0x08>; }; /* lcd_data0.lcd_data0, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + + /* P8_46 (ZCZ ball R2 ) hdmi */ + P8_46_default_pin: pinmux_P8_46_default_pin { + pinctrl-single,pins = <0x0a4 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_46_gpio_pin: pinmux_P8_46_gpio_pin { + pinctrl-single,pins = <0x0a4 0x2F>; }; /* Mode 7, RxActive */ + P8_46_gpio_pu_pin: pinmux_P8_46_gpio_pu_pin { + pinctrl-single,pins = <0x0a4 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_46_gpio_pd_pin: pinmux_P8_46_gpio_pd_pin { + pinctrl-single,pins = <0x0a4 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_46_pruout_pin: pinmux_P8_46_pruout_pin { + pinctrl-single,pins = <0x0a4 0x05>; }; /* Mode 5, Pull-Down*/ + P8_46_pruin_pin: pinmux_P8_46_pruin_pin { + pinctrl-single,pins = <0x0a4 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_46_pwm_pin: pinmux_P8_46_pwm_pin { + pinctrl-single,pins = <0x0a4 0x03>; }; /* Mode 3, Pull-Down*/ + P8_46_hdmi_pin: pinmux_P8_46_hdmi_pin { + pinctrl-single,pins = <0x0a4 0x08>; }; /* lcd_data1.lcd_data1, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + + /************************/ + /* P9 Header */ + /************************/ + + /* P9_01 GND */ + /* P9_02 GND */ + /* P9_03 3.3V */ + /* P9_04 3.3V */ + /* P9_05 VDD_5V */ + /* P9_06 VDD_5V */ + /* P9_07 SYS_5V */ + /* P9_08 SYS_5V */ + /* P9_09 PWR_BUT */ + /* P9_10 (ZCZ ball A10) RESETn */ + + /* P9_11 (ZCZ ball T17) */ + P9_11_default_pin: pinmux_P9_11_default_pin { + pinctrl-single,pins = <0x070 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_11_gpio_pin: pinmux_P9_11_gpio_pin { + pinctrl-single,pins = <0x070 0x2F>; }; /* Mode 7, RxActive */ + P9_11_gpio_pu_pin: pinmux_P9_11_gpio_pu_pin { + pinctrl-single,pins = <0x070 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_11_gpio_pd_pin: pinmux_P9_11_gpio_pd_pin { + pinctrl-single,pins = <0x070 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_11_uart_pin: pinmux_P9_11_uart_pin { + pinctrl-single,pins = <0x070 0x36>; }; /* Mode 6, Pull-Up, RxActive */ + + /* P9_12 (ZCZ ball U18) */ + P9_12_default_pin: pinmux_P9_12_default_pin { + pinctrl-single,pins = <0x078 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_12_gpio_pin: pinmux_P9_12_gpio_pin { + pinctrl-single,pins = <0x078 0x2F>; }; /* Mode 7, RxActive */ + P9_12_gpio_pu_pin: pinmux_P9_12_gpio_pu_pin { + pinctrl-single,pins = <0x078 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_12_gpio_pd_pin: pinmux_P9_12_gpio_pd_pin { + pinctrl-single,pins = <0x078 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + + /* P9_13 (ZCZ ball U17) */ + P9_13_default_pin: pinmux_P9_13_default_pin { + pinctrl-single,pins = <0x074 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_13_gpio_pin: pinmux_P9_13_gpio_pin { + pinctrl-single,pins = <0x074 0x2F>; }; /* Mode 7, RxActive */ + P9_13_gpio_pu_pin: pinmux_P9_13_gpio_pu_pin { + pinctrl-single,pins = <0x074 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_13_gpio_pd_pin: pinmux_P9_13_gpio_pd_pin { + pinctrl-single,pins = <0x074 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_13_uart_pin: pinmux_P9_13_uart_pin { + pinctrl-single,pins = <0x074 0x36>; }; /* Mode 6, Pull-Up, RxActive */ + + /* P9_14 (ZCZ ball U14) */ + P9_14_default_pin: pinmux_P9_14_default_pin { + pinctrl-single,pins = <0x048 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_14_gpio_pin: pinmux_P9_14_gpio_pin { + pinctrl-single,pins = <0x048 0x2F>; }; /* Mode 7, RxActive */ + P9_14_gpio_pu_pin: pinmux_P9_14_gpio_pu_pin { + pinctrl-single,pins = <0x048 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_14_gpio_pd_pin: pinmux_P9_14_gpio_pd_pin { + pinctrl-single,pins = <0x048 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_14_pwm_pin: pinmux_P9_14_pwm_pin { + pinctrl-single,pins = <0x048 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + + /* P9_15 (ZCZ ball R13) */ + P9_15_default_pin: pinmux_P9_15_default_pin { + pinctrl-single,pins = <0x040 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_15_gpio_pin: pinmux_P9_15_gpio_pin { + pinctrl-single,pins = <0x040 0x2F>; }; /* Mode 7, RxActive */ + P9_15_gpio_pu_pin: pinmux_P9_15_gpio_pu_pin { + pinctrl-single,pins = <0x040 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_15_gpio_pd_pin: pinmux_P9_15_gpio_pd_pin { + pinctrl-single,pins = <0x040 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_15_pwm_pin: pinmux_P9_15_pwm_pin { + pinctrl-single,pins = <0x040 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + + /* P9_16 (ZCZ ball T14) */ + P9_16_default_pin: pinmux_P9_16_default_pin { + pinctrl-single,pins = <0x04c 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_16_gpio_pin: pinmux_P9_16_gpio_pin { + pinctrl-single,pins = <0x04c 0x2F>; }; /* Mode 7, RxActive */ + P9_16_gpio_pu_pin: pinmux_P9_16_gpio_pu_pin { + pinctrl-single,pins = <0x04c 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_16_gpio_pd_pin: pinmux_P9_16_gpio_pd_pin { + pinctrl-single,pins = <0x04c 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_16_pwm_pin: pinmux_P9_16_pwm_pin { + pinctrl-single,pins = <0x04c 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + + /* P9_17 (ZCZ ball A16) */ + P9_17_default_pin: pinmux_P9_17_default_pin { + pinctrl-single,pins = <0x15c 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_17_gpio_pin: pinmux_P9_17_gpio_pin { + pinctrl-single,pins = <0x15c 0x2F>; }; /* Mode 7, RxActive */ + P9_17_gpio_pu_pin: pinmux_P9_17_gpio_pu_pin { + pinctrl-single,pins = <0x15c 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_17_gpio_pd_pin: pinmux_P9_17_gpio_pd_pin { + pinctrl-single,pins = <0x15c 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_17_spi_pin: pinmux_P9_17_spi_pin { + pinctrl-single,pins = <0x15c 0x30>; }; /* Mode 0, Pull-Up, RxActive */ + P9_17_i2c_pin: pinmux_P9_17_i2c_pin { + pinctrl-single,pins = <0x15c 0x32>; }; /* Mode 2, Pull-Up, RxActive */ + P9_17_pwm_pin: pinmux_P9_17_pwm_pin { + pinctrl-single,pins = <0x15c 0x33>; }; /* Mode 3, Pull-Up, RxActive */ + + /* P9_18 (ZCZ ball B16) */ + P9_18_default_pin: pinmux_P9_18_default_pin { + pinctrl-single,pins = <0x158 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_18_gpio_pin: pinmux_P9_18_gpio_pin { + pinctrl-single,pins = <0x158 0x2F>; }; /* Mode 7, RxActive */ + P9_18_gpio_pu_pin: pinmux_P9_18_gpio_pu_pin { + pinctrl-single,pins = <0x158 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_18_gpio_pd_pin: pinmux_P9_18_gpio_pd_pin { + pinctrl-single,pins = <0x158 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_18_spi_pin: pinmux_P9_18_spi_pin { + pinctrl-single,pins = <0x158 0x30>; }; /* Mode 0, Pull-Up, RxActive */ + P9_18_i2c_pin: pinmux_P9_18_i2c_pin { + pinctrl-single,pins = <0x158 0x32>; }; /* Mode 2, Pull-Up, RxActive */ + P9_18_pwm_pin: pinmux_P9_18_pwm_pin { + pinctrl-single,pins = <0x158 0x33>; }; /* Mode 3, Pull-Up, RxActive */ + + /* P9_19 (ZCZ ball D17) */ + P9_19_default_pin: pinmux_P9_19_default_pin { + pinctrl-single,pins = <0x17c 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_19_gpio_pin: pinmux_P9_19_gpio_pin { + pinctrl-single,pins = <0x17c 0x2F>; }; /* Mode 7, RxActive */ + P9_19_gpio_pu_pin: pinmux_P9_19_gpio_pu_pin { + pinctrl-single,pins = <0x17c 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_19_gpio_pd_pin: pinmux_P9_19_gpio_pd_pin { + pinctrl-single,pins = <0x17c 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_19_can_pin: pinmux_P9_19_can_pin { + pinctrl-single,pins = <0x17c 0x32>; }; /* Mode 2, Pull-Up, RxActive */ + P9_19_i2c_pin: pinmux_P9_19_i2c_pin { + pinctrl-single,pins = <0x17c 0x73>; }; /* (SLEWCTRL_SLOW | PIN_INPUT_PULLUP | MUX_MODE3) */ + + /* P9_20 (ZCZ ball D18) */ + P9_20_default_pin: pinmux_P9_20_default_pin { + pinctrl-single,pins = <0x178 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_20_gpio_pin: pinmux_P9_20_gpio_pin { + pinctrl-single,pins = <0x178 0x2F>; }; /* Mode 7, RxActive */ + P9_20_gpio_pu_pin: pinmux_P9_20_gpio_pu_pin { + pinctrl-single,pins = <0x178 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_20_gpio_pd_pin: pinmux_P9_20_gpio_pd_pin { + pinctrl-single,pins = <0x178 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_20_can_pin: pinmux_P9_20_can_pin { + pinctrl-single,pins = <0x178 0x12>; }; /* Mode 2, Pull-Up, RxActive */ + P9_20_i2c_pin: pinmux_P9_20_i2c_pin { + pinctrl-single,pins = <0x178 0x73>; }; /* (SLEWCTRL_SLOW | PIN_INPUT_PULLUP | MUX_MODE3) */ + + /* P9_21 (ZCZ ball B17) */ + P9_21_default_pin: pinmux_P9_21_default_pin { + pinctrl-single,pins = <0x154 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_21_gpio_pin: pinmux_P9_21_gpio_pin { + pinctrl-single,pins = <0x154 0x2F>; }; /* Mode 7, RxActive */ + P9_21_gpio_pu_pin: pinmux_P9_21_gpio_pu_pin { + pinctrl-single,pins = <0x154 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_21_gpio_pd_pin: pinmux_P9_21_gpio_pd_pin { + pinctrl-single,pins = <0x154 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_21_spi_pin: pinmux_P9_21_spi_pin { + pinctrl-single,pins = <0x154 0x30>; }; /* Mode 0, Pull-Up, RxActive */ + P9_21_uart_pin: pinmux_P9_21_uart_pin { + pinctrl-single,pins = <0x154 0x31>; }; /* Mode 1, Pull-Up, RxActive */ + P9_21_i2c_pin: pinmux_P9_21_i2c_pin { + pinctrl-single,pins = <0x154 0x32>; }; /* Mode 2, Pull-Up, RxActive */ + P9_21_pwm_pin: pinmux_P9_21_pwm_pin { + pinctrl-single,pins = <0x154 0x33>; }; /* Mode 3, Pull-Up, RxActive */ + + /* P9_22 (ZCZ ball A17) */ + P9_22_default_pin: pinmux_P9_22_default_pin { + pinctrl-single,pins = <0x150 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_22_gpio_pin: pinmux_P9_22_gpio_pin { + pinctrl-single,pins = <0x150 0x2F>; }; /* Mode 7, RxActive */ + P9_22_gpio_pu_pin: pinmux_P9_22_gpio_pu_pin { + pinctrl-single,pins = <0x150 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_22_gpio_pd_pin: pinmux_P9_22_gpio_pd_pin { + pinctrl-single,pins = <0x150 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_22_spi_pin: pinmux_P9_22_spi_pin { + pinctrl-single,pins = <0x150 0x30>; }; /* Mode 0, Pull-Up, RxActive */ + P9_22_uart_pin: pinmux_P9_22_uart_pin { + pinctrl-single,pins = <0x150 0x31>; }; /* Mode 1, Pull-Up, RxActive */ + P9_22_i2c_pin: pinmux_P9_22_i2c_pin { + pinctrl-single,pins = <0x150 0x32>; }; /* Mode 2, Pull-Up, RxActive */ + P9_22_pwm_pin: pinmux_P9_22_pwm_pin { + pinctrl-single,pins = <0x150 0x33>; }; /* Mode 3, Pull-Up, RxActive */ + + /* P9_23 (ZCZ ball V14) */ + P9_23_default_pin: pinmux_P9_23_default_pin { + pinctrl-single,pins = <0x044 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_23_gpio_pin: pinmux_P9_23_gpio_pin { + pinctrl-single,pins = <0x044 0x2F>; }; /* Mode 7, RxActive */ + P9_23_gpio_pu_pin: pinmux_P9_23_gpio_pu_pin { + pinctrl-single,pins = <0x044 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_23_gpio_pd_pin: pinmux_P9_23_gpio_pd_pin { + pinctrl-single,pins = <0x044 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_23_pwm_pin: pinmux_P9_23_pwm_pin { + pinctrl-single,pins = <0x044 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + + /* P9_24 (ZCZ ball D15) */ + P9_24_default_pin: pinmux_P9_24_default_pin { + pinctrl-single,pins = <0x184 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_24_gpio_pin: pinmux_P9_24_gpio_pin { + pinctrl-single,pins = <0x184 0x2F>; }; /* Mode 7, RxActive */ + P9_24_gpio_pu_pin: pinmux_P9_24_gpio_pu_pin { + pinctrl-single,pins = <0x184 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_24_gpio_pd_pin: pinmux_P9_24_gpio_pd_pin { + pinctrl-single,pins = <0x184 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_24_uart_pin: pinmux_P9_24_uart_pin { + pinctrl-single,pins = <0x184 0x30>; }; /* Mode 0, Pull-Up, RxActive */ + P9_24_can_pin: pinmux_P9_24_can_pin { + pinctrl-single,pins = <0x184 0x32>; }; /* Mode 2, Pull-Up, RxActive */ + P9_24_i2c_pin: pinmux_P9_24_i2c_pin { + pinctrl-single,pins = <0x184 0x33>; }; /* Mode 3, Pull-Up, RxActive */ + P9_24_pruin_pin: pinmux_P9_24_pruin_pin { + pinctrl-single,pins = <0x184 0x36>; }; /* Mode 6, Pull-Up, RxActive */ + + /* P9_25 (ZCZ ball A14) Audio */ + P9_25_default_pin: pinmux_P9_25_default_pin { + pinctrl-single,pins = <0x1ac 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_25_gpio_pin: pinmux_P9_25_gpio_pin { + pinctrl-single,pins = <0x1ac 0x2F>; }; /* Mode 7, RxActive */ + P9_25_gpio_pu_pin: pinmux_P9_25_gpio_pu_pin { + pinctrl-single,pins = <0x1ac 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_25_gpio_pd_pin: pinmux_P9_25_gpio_pd_pin { + pinctrl-single,pins = <0x1ac 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_25_qep_pin: pinmux_P9_25_qep_pin { + pinctrl-single,pins = <0x1ac 0x21>; }; /* Mode 1, Pull-Down, RxActive */ + P9_25_pruout_pin: pinmux_P9_25_pruout_pin { + pinctrl-single,pins = <0x1ac 0x25>; }; /* Mode 5, Pull-Down, RxActive */ + P9_25_pruin_pin: pinmux_P9_25_pruin_pin { + pinctrl-single,pins = <0x1ac 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P9_25_audio_pin: pinmux_P9_25_audio_pin { + pinctrl-single,pins = <0x1ac (PIN_INPUT_PULLUP | MUX_MODE0)>; }; /* mcasp0_ahclkx.mcasp0_ahclkx */ + + /* P9_26 (ZCZ ball D16) */ + P9_26_default_pin: pinmux_P9_26_default_pin { + pinctrl-single,pins = <0x180 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_26_gpio_pin: pinmux_P9_26_gpio_pin { + pinctrl-single,pins = <0x180 0x2F>; }; /* Mode 7, RxActive */ + P9_26_gpio_pu_pin: pinmux_P9_26_gpio_pu_pin { + pinctrl-single,pins = <0x180 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_26_gpio_pd_pin: pinmux_P9_26_gpio_pd_pin { + pinctrl-single,pins = <0x180 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_26_uart_pin: pinmux_P9_26_uart_pin { + pinctrl-single,pins = <0x180 0x30>; }; /* Mode 0, Pull-Up, RxActive */ + P9_26_can_pin: pinmux_P9_26_can_pin { + pinctrl-single,pins = <0x180 0x12>; }; /* Mode 2, Pull-Up, RxActive */ + P9_26_i2c_pin: pinmux_P9_26_i2c_pin { + pinctrl-single,pins = <0x180 0x33>; }; /* Mode 3, Pull-Up, RxActive */ + P9_26_pruin_pin: pinmux_P9_26_pruin_pin { + pinctrl-single,pins = <0x180 0x36>; }; /* Mode 6, Pull-Up, RxActive */ + + /* P9_27 (ZCZ ball C13) */ + P9_27_default_pin: pinmux_P9_27_default_pin { + pinctrl-single,pins = <0x1a4 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_27_gpio_pin: pinmux_P9_27_gpio_pin { + pinctrl-single,pins = <0x1a4 0x2F>; }; /* Mode 7, RxActive */ + P9_27_gpio_pu_pin: pinmux_P9_27_gpio_pu_pin { + pinctrl-single,pins = <0x1a4 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_27_gpio_pd_pin: pinmux_P9_27_gpio_pd_pin { + pinctrl-single,pins = <0x1a4 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_27_qep_pin: pinmux_P9_27_qep_pin { + pinctrl-single,pins = <0x1a4 0x21>; }; /* Mode 1, Pull-Down, RxActive */ + P9_27_pruout_pin: pinmux_P9_27_pruout_pin { + pinctrl-single,pins = <0x1a4 0x25>; }; /* Mode 5, Pull-Down, RxActive */ + P9_27_pruin_pin: pinmux_P9_27_pruin_pin { + pinctrl-single,pins = <0x1a4 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + + /* P9_28 (ZCZ ball C12) Audio */ + P9_28_default_pin: pinmux_P9_28_default_pin { + pinctrl-single,pins = <0x19c 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_28_gpio_pin: pinmux_P9_28_gpio_pin { + pinctrl-single,pins = <0x19c 0x2F>; }; /* Mode 7, RxActive */ + P9_28_gpio_pu_pin: pinmux_P9_28_gpio_pu_pin { + pinctrl-single,pins = <0x19c 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_28_gpio_pd_pin: pinmux_P9_28_gpio_pd_pin { + pinctrl-single,pins = <0x19c 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_28_pwm_pin: pinmux_P9_28_pwm_pin { + pinctrl-single,pins = <0x19c 0x21>; }; /* Mode 1, Pull-Down, RxActive */ + P9_28_spi_pin: pinmux_P9_28_spi_pin { + pinctrl-single,pins = <0x19c 0x23>; }; /* Mode 3, Pull-Down, RxActive */ + P9_28_pwm2_pin: pinmux_P9_28_pwm2_pin { + pinctrl-single,pins = <0x19c 0x24>; }; /* Mode 4, Pull-Down, RxActive */ + P9_28_pruout_pin: pinmux_P9_28_pruout_pin { + pinctrl-single,pins = <0x19c 0x25>; }; /* Mode 5, Pull-Down, RxActive */ + P9_28_pruin_pin: pinmux_P9_28_pruin_pin { + pinctrl-single,pins = <0x19c 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P9_28_audio_pin: pinmux_P9_28_audio_pin { + pinctrl-single,pins = <0x19c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)>; }; /* mcasp0_ahclkr.mcasp0_axr2 */ + + /* P9_29 (ZCZ ball B13) Audio */ + P9_29_default_pin: pinmux_P9_29_default_pin { + pinctrl-single,pins = <0x194 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_29_gpio_pin: pinmux_P9_29_gpio_pin { + pinctrl-single,pins = <0x194 0x2F>; }; /* Mode 7, RxActive */ + P9_29_gpio_pu_pin: pinmux_P9_29_gpio_pu_pin { + pinctrl-single,pins = <0x194 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_29_gpio_pd_pin: pinmux_P9_29_gpio_pd_pin { + pinctrl-single,pins = <0x194 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_29_pwm_pin: pinmux_P9_29_pwm_pin { + pinctrl-single,pins = <0x194 0x21>; }; /* Mode 1, Pull-Down, RxActive */ + P9_29_spi_pin: pinmux_P9_29_spi_pin { + pinctrl-single,pins = <0x194 0x23>; }; /* Mode 3, Pull-Down, RxActive */ + P9_29_pruout_pin: pinmux_P9_29_pruout_pin { + pinctrl-single,pins = <0x194 0x25>; }; /* Mode 5, Pull-Down, RxActive */ + P9_29_pruin_pin: pinmux_P9_29_pruin_pin { + pinctrl-single,pins = <0x194 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P9_29_audio_pin: pinmux_P9_29_audio_pin { + pinctrl-single,pins = <0x194 (PIN_OUTPUT_PULLUP | MUX_MODE0)>; }; /* mcasp0_fsx.mcasp0_fsx */ + + /* P9_30 (ZCZ ball D12) */ + P9_30_default_pin: pinmux_P9_30_default_pin { + pinctrl-single,pins = <0x198 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_30_gpio_pin: pinmux_P9_30_gpio_pin { + pinctrl-single,pins = <0x198 0x2F>; }; /* Mode 7, RxActive */ + P9_30_gpio_pu_pin: pinmux_P9_30_gpio_pu_pin { + pinctrl-single,pins = <0x198 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_30_gpio_pd_pin: pinmux_P9_30_gpio_pd_pin { + pinctrl-single,pins = <0x198 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_30_pwm_pin: pinmux_P9_30_pwm_pin { + pinctrl-single,pins = <0x198 0x21>; }; /* Mode 1, Pull-Down, RxActive */ + P9_30_spi_pin: pinmux_P9_30_spi_pin { + pinctrl-single,pins = <0x198 0x23>; }; /* Mode 3, Pull-Down, RxActive */ + P9_30_pruout_pin: pinmux_P9_30_pruout_pin { + pinctrl-single,pins = <0x198 0x25>; }; /* Mode 5, Pull-Down, RxActive */ + P9_30_pruin_pin: pinmux_P9_30_pruin_pin { + pinctrl-single,pins = <0x198 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + + /* P9_31 (ZCZ ball A13) Audio */ + P9_31_default_pin: pinmux_P9_31_default_pin { + pinctrl-single,pins = <0x190 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_31_gpio_pin: pinmux_P9_31_gpio_pin { + pinctrl-single,pins = <0x190 0x2F>; }; /* Mode 7, RxActive */ + P9_31_gpio_pu_pin: pinmux_P9_31_gpio_pu_pin { + pinctrl-single,pins = <0x190 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_31_gpio_pd_pin: pinmux_P9_31_gpio_pd_pin { + pinctrl-single,pins = <0x190 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_31_pwm_pin: pinmux_P9_31_pwm_pin { + pinctrl-single,pins = <0x190 0x21>; }; /* Mode 1, Pull-Down, RxActive */ + P9_31_spi_pin: pinmux_P9_31_spi_pin { + pinctrl-single,pins = <0x190 0x23>; }; /* Mode 3, Pull-Down, RxActive */ + P9_31_pruout_pin: pinmux_P9_31_pruout_pin { + pinctrl-single,pins = <0x190 0x25>; }; /* Mode 5, Pull-Down, RxActive */ + P9_31_pruin_pin: pinmux_P9_31_pruin_pin { + pinctrl-single,pins = <0x190 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P9_31_audio_pin: pinmux_P9_31_audio_pin { + pinctrl-single,pins = <0x190 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)>; }; /* mcasp0_aclkx.mcasp0_aclkx */ + + /* P9_32 VADC */ + /* P9_33 (ZCZ ball C8 ) AIN4 */ + /* P9_34 AGND */ + /* P9_35 (ZCZ ball A8 ) AIN6 */ + /* P9_36 (ZCZ ball B8 ) AIN5 */ + /* P9_37 (ZCZ ball B7 ) AIN2 */ + /* P9_38 (ZCZ ball A7 ) AIN3 */ + /* P9_39 (ZCZ ball B6 ) AIN0 */ + /* P9_40 (ZCZ ball C7 ) AIN1 */ + + /* P9_41 (ZCZ ball D14) */ + P9_41_default_pin: pinmux_P9_41_default_pin { + pinctrl-single,pins = <0x1b4 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_41_gpio_pin: pinmux_P9_41_gpio_pin { + pinctrl-single,pins = <0x1b4 0x2F>; }; /* Mode 7, RxActive */ + P9_41_gpio_pu_pin: pinmux_P9_41_gpio_pu_pin { + pinctrl-single,pins = <0x1b4 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_41_gpio_pd_pin: pinmux_P9_41_gpio_pd_pin { + pinctrl-single,pins = <0x1b4 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_41_timer_pin: pinmux_P9_41_timer_pin { + pinctrl-single,pins = <0x1b4 0x24>; }; /* Mode 4, Pull-Down, RxActive */ + P9_41_pruin_pin: pinmux_P9_41_pruin_pin { + pinctrl-single,pins = <0x1b4 0x25>; }; /* Mode 5, Pull-Down, RxActive */ + + /* P9_41.1 */ + /* P9_91 (ZCZ ball D13) */ + P9_91_default_pin: pinmux_P9_91_default_pin { + pinctrl-single,pins = <0x1a8 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_91_gpio_pin: pinmux_P9_91_gpio_pin { + pinctrl-single,pins = <0x1a8 0x2F>; }; /* Mode 7, RxActive */ + P9_91_gpio_pu_pin: pinmux_P9_91_gpio_pu_pin { + pinctrl-single,pins = <0x1a8 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_91_gpio_pd_pin: pinmux_P9_91_gpio_pd_pin { + pinctrl-single,pins = <0x1a8 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_91_qep_pin: pinmux_P9_91_qep_pin { + pinctrl-single,pins = <0x1a8 0x21>; }; /* Mode 1, Pull-Down, RxActive */ + P9_91_pruout_pin: pinmux_P9_91_pruout_pin { + pinctrl-single,pins = <0x1a8 0x25>; }; /* Mode 5, Pull-Down, RxActive */ + P9_91_pruin_pin: pinmux_P9_91_pruin_pin { + pinctrl-single,pins = <0x1a8 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + + /* P9_42 (ZCZ ball C18) */ + P9_42_default_pin: pinmux_P9_42_default_pin { + pinctrl-single,pins = <0x164 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_42_gpio_pin: pinmux_P9_42_gpio_pin { + pinctrl-single,pins = <0x164 0x2F>; }; /* Mode 7, RxActive */ + P9_42_gpio_pu_pin: pinmux_P9_42_gpio_pu_pin { + pinctrl-single,pins = <0x164 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_42_gpio_pd_pin: pinmux_P9_42_gpio_pd_pin { + pinctrl-single,pins = <0x164 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_42_pwm_pin: pinmux_P9_42_pwm_pin { + pinctrl-single,pins = <0x164 0x20>; }; /* Mode 0, Pull-Down, RxActive */ + P9_42_uart_pin: pinmux_P9_42_uart_pin { + pinctrl-single,pins = <0x164 0x21>; }; /* Mode 1, Pull-Down, RxActive */ + P9_42_spics_pin: pinmux_P9_42_spics_pin { + pinctrl-single,pins = <0x164 0x22>; }; /* Mode 2, Pull-Down, RxActive */ + P9_42_spiclk_pin: pinmux_P9_42_spiclk_pin { + pinctrl-single,pins = <0x164 0x24>; }; /* Mode 4, Pull-Down, RxActive */ + + /* P9_42.1 */ + /* P9_92 (ZCZ ball B12) */ + P9_92_default_pin: pinmux_P9_92_default_pin { + pinctrl-single,pins = <0x1a0 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_92_gpio_pin: pinmux_P9_92_gpio_pin { + pinctrl-single,pins = <0x1a0 0x2F>; }; /* Mode 7, RxActive */ + P9_92_gpio_pu_pin: pinmux_P9_92_gpio_pu_pin { + pinctrl-single,pins = <0x1a0 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_92_gpio_pd_pin: pinmux_P9_92_gpio_pd_pin { + pinctrl-single,pins = <0x1a0 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_92_qep_pin: pinmux_P9_92_qep_pin { + pinctrl-single,pins = <0x1a0 0x21>; }; /* Mode 1, Pull-Down, RxActive */ + P9_92_pruout_pin: pinmux_P9_92_pruout_pin { + pinctrl-single,pins = <0x1a0 0x25>; }; /* Mode 5, Pull-Down, RxActive */ + P9_92_pruin_pin: pinmux_P9_92_pruin_pin { + pinctrl-single,pins = <0x1a0 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + + /* P9_43 GND */ + /* P9_44 GND */ + /* P9_45 GND */ + /* P9_46 GND */ +}; diff --git b/arch/arm/boot/dts/am335x-bone-common-universal.dtsi b/arch/arm/boot/dts/am335x-bone-common-universal.dtsi new file mode 100644 index 0000000..781e33f --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-common-universal.dtsi @@ -0,0 +1,2052 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&am33xx_pinmux { + /************************/ + /* P8 Header */ + /************************/ + + /* P8_01 GND */ + /* P8_02 GND */ + /* P8_03 (ZCZ ball R9 ) emmc */ + /* P8_04 (ZCZ ball T9 ) emmc */ + /* P8_05 (ZCZ ball R8 ) emmc */ + /* P8_06 (ZCZ ball T8 ) emmc */ + + /* P8_07 (ZCZ ball R7 ) */ + P8_07_default_pin: pinmux_P8_07_default_pin { + pinctrl-single,pins = <0x090 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_07_gpio_pin: pinmux_P8_07_gpio_pin { + pinctrl-single,pins = <0x090 0x2F>; }; /* Mode 7, RxActive */ + P8_07_gpio_pu_pin: pinmux_P8_07_gpio_pu_pin { + pinctrl-single,pins = <0x090 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_07_gpio_pd_pin: pinmux_P8_07_gpio_pd_pin { + pinctrl-single,pins = <0x090 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_07_timer_pin: pinmux_P8_07_timer_pin { + pinctrl-single,pins = <0x090 0x32>; }; /* Mode 2, Pull-Up, RxActive */ + + /* P8_08 (ZCZ ball T7 ) */ + P8_08_default_pin: pinmux_P8_08_default_pin { + pinctrl-single,pins = <0x094 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_08_gpio_pin: pinmux_P8_08_gpio_pin { + pinctrl-single,pins = <0x094 0x2F>; }; /* Mode 7, RxActive */ + P8_08_gpio_pu_pin: pinmux_P8_08_gpio_pu_pin { + pinctrl-single,pins = <0x094 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_08_gpio_pd_pin: pinmux_P8_08_gpio_pd_pin { + pinctrl-single,pins = <0x094 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_08_timer_pin: pinmux_P8_08_timer_pin { + pinctrl-single,pins = <0x094 0x32>; }; /* Mode 2, Pull-Up, RxActive */ + + /* P8_09 (ZCZ ball T6 ) */ + P8_09_default_pin: pinmux_P8_09_default_pin { + pinctrl-single,pins = <0x09c 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_09_gpio_pin: pinmux_P8_09_gpio_pin { + pinctrl-single,pins = <0x09c 0x2F>; }; /* Mode 7, RxActive */ + P8_09_gpio_pu_pin: pinmux_P8_09_gpio_pu_pin { + pinctrl-single,pins = <0x09c 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_09_gpio_pd_pin: pinmux_P8_09_gpio_pd_pin { + pinctrl-single,pins = <0x09c 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_09_timer_pin: pinmux_P8_09_timer_pin { + pinctrl-single,pins = <0x09c 0x32>; }; /* Mode 2, Pull-Up, RxActive */ + + /* P8_10 (ZCZ ball U6 ) */ + P8_10_default_pin: pinmux_P8_10_default_pin { + pinctrl-single,pins = <0x098 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_10_gpio_pin: pinmux_P8_10_gpio_pin { + pinctrl-single,pins = <0x098 0x2F>; }; /* Mode 7, RxActive */ + P8_10_gpio_pu_pin: pinmux_P8_10_gpio_pu_pin { + pinctrl-single,pins = <0x098 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_10_gpio_pd_pin: pinmux_P8_10_gpio_pd_pin { + pinctrl-single,pins = <0x098 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_10_timer_pin: pinmux_P8_10_timer_pin { + pinctrl-single,pins = <0x098 0x32>; }; /* Mode 2, Pull-Up, RxActive */ + + /* P8_11 (ZCZ ball R12) */ + P8_11_default_pin: pinmux_P8_11_default_pin { + pinctrl-single,pins = <0x034 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_11_gpio_pin: pinmux_P8_11_gpio_pin { + pinctrl-single,pins = <0x034 0x2F>; }; /* Mode 7, RxActive */ + P8_11_gpio_pu_pin: pinmux_P8_11_gpio_pu_pin { + pinctrl-single,pins = <0x034 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_11_gpio_pd_pin: pinmux_P8_11_gpio_pd_pin { + pinctrl-single,pins = <0x034 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_11_pruout_pin: pinmux_P8_11_pruout_pin { + pinctrl-single,pins = <0x034 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_11_qep_pin: pinmux_P8_11_qep_pin { + pinctrl-single,pins = <0x034 0x24>; }; /* Mode 4, Pull-Down, RxActive */ + + /* P8_12 (ZCZ ball T12) */ + P8_12_default_pin: pinmux_P8_12_default_pin { + pinctrl-single,pins = <0x030 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_12_gpio_pin: pinmux_P8_12_gpio_pin { + pinctrl-single,pins = <0x030 0x2F>; }; /* Mode 7, RxActive */ + P8_12_gpio_pu_pin: pinmux_P8_12_gpio_pu_pin { + pinctrl-single,pins = <0x030 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_12_gpio_pd_pin: pinmux_P8_12_gpio_pd_pin { + pinctrl-single,pins = <0x030 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_12_pruout_pin: pinmux_P8_12_pruout_pin { + pinctrl-single,pins = <0x030 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_12_qep_pin: pinmux_P8_12_qep_pin { + pinctrl-single,pins = <0x030 0x24>; }; /* Mode 4, Pull-Down, RxActive */ + + /* P8_13 (ZCZ ball T10) */ + P8_13_default_pin: pinmux_P8_13_default_pin { + pinctrl-single,pins = <0x024 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_13_gpio_pin: pinmux_P8_13_gpio_pin { + pinctrl-single,pins = <0x024 0x2F>; }; /* Mode 7, RxActive */ + P8_13_gpio_pu_pin: pinmux_P8_13_gpio_pu_pin { + pinctrl-single,pins = <0x024 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_13_gpio_pd_pin: pinmux_P8_13_gpio_pd_pin { + pinctrl-single,pins = <0x024 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_13_pwm_pin: pinmux_P8_13_pwm_pin { + pinctrl-single,pins = <0x024 0x24>; }; /* Mode 4, Pull-Down, RxActive */ + + /* P8_14 (ZCZ ball T11) */ + P8_14_default_pin: pinmux_P8_14_default_pin { + pinctrl-single,pins = <0x028 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_14_gpio_pin: pinmux_P8_14_gpio_pin { + pinctrl-single,pins = <0x028 0x2F>; }; /* Mode 7, RxActive */ + P8_14_gpio_pu_pin: pinmux_P8_14_gpio_pu_pin { + pinctrl-single,pins = <0x028 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_14_gpio_pd_pin: pinmux_P8_14_gpio_pd_pin { + pinctrl-single,pins = <0x028 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_14_pwm_pin: pinmux_P8_14_pwm_pin { + pinctrl-single,pins = <0x028 0x24>; }; /* Mode 4, Pull-Down, RxActive */ + + /* P8_15 (ZCZ ball U13) */ + P8_15_default_pin: pinmux_P8_15_default_pin { + pinctrl-single,pins = <0x03c 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_15_gpio_pin: pinmux_P8_15_gpio_pin { + pinctrl-single,pins = <0x03c 0x2F>; }; /* Mode 7, RxActive */ + P8_15_gpio_pu_pin: pinmux_P8_15_gpio_pu_pin { + pinctrl-single,pins = <0x03c 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_15_gpio_pd_pin: pinmux_P8_15_gpio_pd_pin { + pinctrl-single,pins = <0x03c 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_15_pruin_pin: pinmux_P8_15_pruin_pin { + pinctrl-single,pins = <0x03c 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_15_qep_pin: pinmux_P8_15_qep_pin { + pinctrl-single,pins = <0x03c 0x24>; }; /* Mode 4, Pull-Down, RxActive */ + + /* P8_16 (ZCZ ball V13) */ + P8_16_default_pin: pinmux_P8_16_default_pin { + pinctrl-single,pins = <0x038 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_16_gpio_pin: pinmux_P8_16_gpio_pin { + pinctrl-single,pins = <0x038 0x2F>; }; /* Mode 7, RxActive */ + P8_16_gpio_pu_pin: pinmux_P8_16_gpio_pu_pin { + pinctrl-single,pins = <0x038 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_16_gpio_pd_pin: pinmux_P8_16_gpio_pd_pin { + pinctrl-single,pins = <0x038 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_16_pruin_pin: pinmux_P8_16_pruin_pin { + pinctrl-single,pins = <0x038 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_16_qep_pin: pinmux_P8_16_qep_pin { + pinctrl-single,pins = <0x038 0x24>; }; /* Mode 4, Pull-Down, RxActive */ + + /* P8_17 (ZCZ ball U12) */ + P8_17_default_pin: pinmux_P8_17_default_pin { + pinctrl-single,pins = <0x02c 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_17_gpio_pin: pinmux_P8_17_gpio_pin { + pinctrl-single,pins = <0x02c 0x2F>; }; /* Mode 7, RxActive */ + P8_17_gpio_pu_pin: pinmux_P8_17_gpio_pu_pin { + pinctrl-single,pins = <0x02c 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_17_gpio_pd_pin: pinmux_P8_17_gpio_pd_pin { + pinctrl-single,pins = <0x02c 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_17_pwm_pin: pinmux_P8_17_pwm_pin { + pinctrl-single,pins = <0x02c 0x24>; }; /* Mode 4, Pull-Down, RxActive */ + + /* P8_18 (ZCZ ball V12) */ + P8_18_default_pin: pinmux_P8_18_default_pin { + pinctrl-single,pins = <0x08c 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_18_gpio_pin: pinmux_P8_18_gpio_pin { + pinctrl-single,pins = <0x08c 0x2F>; }; /* Mode 7, RxActive */ + P8_18_gpio_pu_pin: pinmux_P8_18_gpio_pu_pin { + pinctrl-single,pins = <0x08c 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_18_gpio_pd_pin: pinmux_P8_18_gpio_pd_pin { + pinctrl-single,pins = <0x08c 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + + /* P8_19 (ZCZ ball U10) */ + P8_19_default_pin: pinmux_P8_19_default_pin { + pinctrl-single,pins = <0x020 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_19_gpio_pin: pinmux_P8_19_gpio_pin { + pinctrl-single,pins = <0x020 0x2F>; }; /* Mode 7, RxActive */ + P8_19_gpio_pu_pin: pinmux_P8_19_gpio_pu_pin { + pinctrl-single,pins = <0x020 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_19_gpio_pd_pin: pinmux_P8_19_gpio_pd_pin { + pinctrl-single,pins = <0x020 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_19_pwm_pin: pinmux_P8_19_pwm_pin { + pinctrl-single,pins = <0x020 0x24>; }; /* Mode 4, Pull-Down, RxActive */ + + /* P8_20 (ZCZ ball V9 ) emmc */ + /* P8_21 (ZCZ ball U9 ) emmc */ + /* P8_22 (ZCZ ball V8 ) emmc */ + /* P8_23 (ZCZ ball U8 ) emmc */ + /* P8_24 (ZCZ ball V7 ) emmc */ + /* P8_25 (ZCZ ball U7 ) emmc */ + + /* P8_26 (ZCZ ball V6 ) */ + P8_26_default_pin: pinmux_P8_26_default_pin { + pinctrl-single,pins = <0x07c 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_26_gpio_pin: pinmux_P8_26_gpio_pin { + pinctrl-single,pins = <0x07c 0x2F>; }; /* Mode 7, RxActive */ + P8_26_gpio_pu_pin: pinmux_P8_26_gpio_pu_pin { + pinctrl-single,pins = <0x07c 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_26_gpio_pd_pin: pinmux_P8_26_gpio_pd_pin { + pinctrl-single,pins = <0x07c 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + + /* P8_27 (ZCZ ball U5 ) hdmi */ + P8_27_default_pin: pinmux_P8_27_default_pin { + pinctrl-single,pins = <0x0e0 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_27_gpio_pin: pinmux_P8_27_gpio_pin { + pinctrl-single,pins = <0x0e0 0x2F>; }; /* Mode 7, RxActive */ + P8_27_gpio_pu_pin: pinmux_P8_27_gpio_pu_pin { + pinctrl-single,pins = <0x0e0 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_27_gpio_pd_pin: pinmux_P8_27_gpio_pd_pin { + pinctrl-single,pins = <0x0e0 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_27_pruout_pin: pinmux_P8_27_pruout_pin { + pinctrl-single,pins = <0x0e0 0x05>; }; /* Mode 5, Pull-Down*/ + P8_27_pruin_pin: pinmux_P8_27_pruin_pin { + pinctrl-single,pins = <0x0e0 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_27_hdmi_pin: pinmux_P8_27_hdmi_pin { + pinctrl-single,pins = <0x0e0 0x00>; }; /* lcd_vsync.lcd_vsync, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ + + /* P8_28 (ZCZ ball V5 ) hdmi */ + P8_28_default_pin: pinmux_P8_28_default_pin { + pinctrl-single,pins = <0x0e8 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_28_gpio_pin: pinmux_P8_28_gpio_pin { + pinctrl-single,pins = <0x0e8 0x2F>; }; /* Mode 7, RxActive */ + P8_28_gpio_pu_pin: pinmux_P8_28_gpio_pu_pin { + pinctrl-single,pins = <0x0e8 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_28_gpio_pd_pin: pinmux_P8_28_gpio_pd_pin { + pinctrl-single,pins = <0x0e8 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_28_pruout_pin: pinmux_P8_28_pruout_pin { + pinctrl-single,pins = <0x0e8 0x05>; }; /* Mode 5, Pull-Down */ + P8_28_pruin_pin: pinmux_P8_28_pruin_pin { + pinctrl-single,pins = <0x0e8 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_28_hdmi_pin: pinmux_P8_28_hdmi_pin { + pinctrl-single,pins = <0x0e8 0x00>; }; /* lcd_pclk.lcd_pclk, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ + + /* P8_29 (ZCZ ball R5 ) hdmi */ + P8_29_default_pin: pinmux_P8_29_default_pin { + pinctrl-single,pins = <0x0e4 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_29_gpio_pin: pinmux_P8_29_gpio_pin { + pinctrl-single,pins = <0x0e4 0x2F>; }; /* Mode 7, RxActive */ + P8_29_gpio_pu_pin: pinmux_P8_29_gpio_pu_pin { + pinctrl-single,pins = <0x0e4 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_29_gpio_pd_pin: pinmux_P8_29_gpio_pd_pin { + pinctrl-single,pins = <0x0e4 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_29_pruout_pin: pinmux_P8_29_pruout_pin { + pinctrl-single,pins = <0x0e4 0x05>; }; /* Mode 5, Pull-Down*/ + P8_29_pruin_pin: pinmux_P8_29_pruin_pin { + pinctrl-single,pins = <0x0e4 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_29_hdmi_pin: pinmux_P8_29_hdmi_pin { + pinctrl-single,pins = <0x0e4 0x00>; }; /* lcd_hsync.lcd_hsync, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ + + /* P8_30 (ZCZ ball R6 ) hdmi */ + P8_30_default_pin: pinmux_P8_30_default_pin { + pinctrl-single,pins = <0x0ec 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_30_gpio_pin: pinmux_P8_30_gpio_pin { + pinctrl-single,pins = <0x0ec 0x2F>; }; /* Mode 7, RxActive */ + P8_30_gpio_pu_pin: pinmux_P8_30_gpio_pu_pin { + pinctrl-single,pins = <0x0ec 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_30_gpio_pd_pin: pinmux_P8_30_gpio_pd_pin { + pinctrl-single,pins = <0x0ec 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_30_pruout_pin: pinmux_P8_30_pruout_pin { + pinctrl-single,pins = <0x0ec 0x05>; }; /* Mode 5, Pull-Down*/ + P8_30_pruin_pin: pinmux_P8_30_pruin_pin { + pinctrl-single,pins = <0x0ec 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_30_hdmi_pin: pinmux_P8_30_hdmi_pin { + pinctrl-single,pins = <0x0ec 0x00>; }; /* lcd_ac_bias_en.lcd_ac_bias_en, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ + + /* P8_31 (ZCZ ball V4 ) hdmi */ + P8_31_default_pin: pinmux_P8_31_default_pin { + pinctrl-single,pins = <0x0d8 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_31_gpio_pin: pinmux_P8_31_gpio_pin { + pinctrl-single,pins = <0x0d8 0x2F>; }; /* Mode 7, RxActive */ + P8_31_gpio_pu_pin: pinmux_P8_31_gpio_pu_pin { + pinctrl-single,pins = <0x0d8 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_31_gpio_pd_pin: pinmux_P8_31_gpio_pd_pin { + pinctrl-single,pins = <0x0d8 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_31_uart_pin: pinmux_P8_31_uart_pin { + pinctrl-single,pins = <0x0d8 0x24>; }; /* Mode 4, Pull-Down, RxActive */ + P8_31_hdmi_pin: pinmux_P8_31_hdmi_pin { + pinctrl-single,pins = <0x0d8 0x08>; }; /* lcd_data14.lcd_data14, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + + /* P8_32 (ZCZ ball T5 ) hdmi */ + P8_32_default_pin: pinmux_P8_32_default_pin { + pinctrl-single,pins = <0x0dc 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_32_gpio_pin: pinmux_P8_32_gpio_pin { + pinctrl-single,pins = <0x0dc 0x2F>; }; /* Mode 7, RxActive */ + P8_32_gpio_pu_pin: pinmux_P8_32_gpio_pu_pin { + pinctrl-single,pins = <0x0dc 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_32_gpio_pd_pin: pinmux_P8_32_gpio_pd_pin { + pinctrl-single,pins = <0x0dc 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_32_uart_pin: pinmux_P8_32_uart_pin { + pinctrl-single,pins = <0x0dc 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_32_hdmi_pin: pinmux_P8_32_hdmi_pin { + pinctrl-single,pins = <0x0dc 0x08>; }; /* lcd_data15.lcd_data15, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + + /* P8_33 (ZCZ ball V3 ) hdmi */ + P8_33_default_pin: pinmux_P8_33_default_pin { + pinctrl-single,pins = <0x0d4 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_33_gpio_pin: pinmux_P8_33_gpio_pin { + pinctrl-single,pins = <0x0d4 0x2F>; }; /* Mode 7, RxActive */ + P8_33_gpio_pu_pin: pinmux_P8_33_gpio_pu_pin { + pinctrl-single,pins = <0x0d4 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_33_gpio_pd_pin: pinmux_P8_33_gpio_pd_pin { + pinctrl-single,pins = <0x0d4 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_33_hdmi_pin: pinmux_P8_33_hdmi_pin { + pinctrl-single,pins = <0x0d4 0x08>; }; /* lcd_data13.lcd_data13, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + + /* P8_34 (ZCZ ball U4 ) hdmi */ + P8_34_default_pin: pinmux_P8_34_default_pin { + pinctrl-single,pins = <0x0cc 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_34_gpio_pin: pinmux_P8_34_gpio_pin { + pinctrl-single,pins = <0x0cc 0x2F>; }; /* Mode 7, RxActive */ + P8_34_gpio_pu_pin: pinmux_P8_34_gpio_pu_pin { + pinctrl-single,pins = <0x0cc 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_34_gpio_pd_pin: pinmux_P8_34_gpio_pd_pin { + pinctrl-single,pins = <0x0cc 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_34_pwm_pin: pinmux_P8_34_pwm_pin { + pinctrl-single,pins = <0x0cc 0x22>; }; /* Mode 2, Pull-Down, RxActive */ + P8_34_hdmi_pin: pinmux_P8_34_hdmi_pin { + pinctrl-single,pins = <0x0cc 0x08>; }; /* lcd_data11.lcd_data11, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + + /* P8_35 (ZCZ ball V2 ) hdmi */ + P8_35_default_pin: pinmux_P8_35_default_pin { + pinctrl-single,pins = <0x0d0 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_35_gpio_pin: pinmux_P8_35_gpio_pin { + pinctrl-single,pins = <0x0d0 0x2F>; }; /* Mode 7, RxActive */ + P8_35_gpio_pu_pin: pinmux_P8_35_gpio_pu_pin { + pinctrl-single,pins = <0x0d0 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_35_gpio_pd_pin: pinmux_P8_35_gpio_pd_pin { + pinctrl-single,pins = <0x0d0 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_35_hdmi_pin: pinmux_P8_35_hdmi_pin { + pinctrl-single,pins = <0x0d0 0x08>; }; /* lcd_data12.lcd_data12, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + + /* P8_36 (ZCZ ball U3 ) hdmi */ + P8_36_default_pin: pinmux_P8_36_default_pin { + pinctrl-single,pins = <0x0c8 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_36_gpio_pin: pinmux_P8_36_gpio_pin { + pinctrl-single,pins = <0x0c8 0x2F>; }; /* Mode 7, RxActive */ + P8_36_gpio_pu_pin: pinmux_P8_36_gpio_pu_pin { + pinctrl-single,pins = <0x0c8 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_36_gpio_pd_pin: pinmux_P8_36_gpio_pd_pin { + pinctrl-single,pins = <0x0c8 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_36_pwm_pin: pinmux_P8_36_pwm_pin { + pinctrl-single,pins = <0x0c8 0x22>; }; /* Mode 2, Pull-Down, RxActive */ + P8_36_hdmi_pin: pinmux_P8_36_hdmi_pin { + pinctrl-single,pins = <0x0c8 0x08>; }; /* lcd_data10.lcd_data10, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + + /* P8_37 (ZCZ ball U1 ) hdmi */ + P8_37_default_pin: pinmux_P8_37_default_pin { + pinctrl-single,pins = <0x0c0 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_37_gpio_pin: pinmux_P8_37_gpio_pin { + pinctrl-single,pins = <0x0c0 0x2F>; }; /* Mode 7, RxActive */ + P8_37_gpio_pu_pin: pinmux_P8_37_gpio_pu_pin { + pinctrl-single,pins = <0x0c0 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_37_gpio_pd_pin: pinmux_P8_37_gpio_pd_pin { + pinctrl-single,pins = <0x0c0 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_37_uart_pin: pinmux_P8_37_uart_pin { + pinctrl-single,pins = <0x0c0 0x04>; }; /* Mode 4, Pull-Down*/ + P8_37_pwm_pin: pinmux_P8_37_pwm_pin { + pinctrl-single,pins = <0x0c0 0x02>; }; /* Mode 2, Pull-Down*/ + P8_37_hdmi_pin: pinmux_P8_37_hdmi_pin { + pinctrl-single,pins = <0x0c0 0x08>; }; /* lcd_data8.lcd_data8, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + + + /* P8_38 (ZCZ ball U2 ) hdmi */ + P8_38_default_pin: pinmux_P8_38_default_pin { + pinctrl-single,pins = <0x0c4 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_38_gpio_pin: pinmux_P8_38_gpio_pin { + pinctrl-single,pins = <0x0c4 0x2F>; }; /* Mode 7, RxActive */ + P8_38_gpio_pu_pin: pinmux_P8_38_gpio_pu_pin { + pinctrl-single,pins = <0x0c4 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_38_gpio_pd_pin: pinmux_P8_38_gpio_pd_pin { + pinctrl-single,pins = <0x0c4 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_38_uart_pin: pinmux_P8_38_uart_pin { + pinctrl-single,pins = <0x0c4 0x24>; }; /* Mode 4, Pull-Down, RxActive */ + P8_38_pwm_pin: pinmux_P8_38_pwm_pin { + pinctrl-single,pins = <0x0c4 0x22>; }; /* Mode 2, Pull-Down, RxActive */ + P8_38_hdmi_pin: pinmux_P8_38_hdmi_pin { + pinctrl-single,pins = <0x0c4 0x08>; }; /* lcd_data9.lcd_data9, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + + + /* P8_39 (ZCZ ball T3 ) hdmi */ + P8_39_default_pin: pinmux_P8_39_default_pin { + pinctrl-single,pins = <0x0b8 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_39_gpio_pin: pinmux_P8_39_gpio_pin { + pinctrl-single,pins = <0x0b8 0x2F>; }; /* Mode 7, RxActive */ + P8_39_gpio_pu_pin: pinmux_P8_39_gpio_pu_pin { + pinctrl-single,pins = <0x0b8 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_39_gpio_pd_pin: pinmux_P8_39_gpio_pd_pin { + pinctrl-single,pins = <0x0b8 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_39_pruout_pin: pinmux_P8_39_pruout_pin { + pinctrl-single,pins = <0x0b8 0x05>; }; /* Mode 5, Pull-Down*/ + P8_39_pruin_pin: pinmux_P8_39_pruin_pin { + pinctrl-single,pins = <0x0b8 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_39_hdmi_pin: pinmux_P8_39_hdmi_pin { + pinctrl-single,pins = <0x0b8 0x08>; }; /* lcd_data6.lcd_data6, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + + /* P8_40 (ZCZ ball T4 ) hdmi */ + P8_40_default_pin: pinmux_P8_40_default_pin { + pinctrl-single,pins = <0x0bc 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_40_gpio_pin: pinmux_P8_40_gpio_pin { + pinctrl-single,pins = <0x0bc 0x2F>; }; /* Mode 7, RxActive */ + P8_40_gpio_pu_pin: pinmux_P8_40_gpio_pu_pin { + pinctrl-single,pins = <0x0bc 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_40_gpio_pd_pin: pinmux_P8_40_gpio_pd_pin { + pinctrl-single,pins = <0x0bc 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_40_pruout_pin: pinmux_P8_40_pruout_pin { + pinctrl-single,pins = <0x0bc 0x05>; }; /* Mode 5, Pull-Down*/ + P8_40_pruin_pin: pinmux_P8_40_pruin_pin { + pinctrl-single,pins = <0x0bc 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_40_hdmi_pin: pinmux_P8_40_hdmi_pin { + pinctrl-single,pins = <0x0bc 0x08>; }; /* lcd_data7.lcd_data7, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + + /* P8_41 (ZCZ ball T1 ) hdmi */ + P8_41_default_pin: pinmux_P8_41_default_pin { + pinctrl-single,pins = <0x0b0 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_41_gpio_pin: pinmux_P8_41_gpio_pin { + pinctrl-single,pins = <0x0b0 0x2F>; }; /* Mode 7, RxActive */ + P8_41_gpio_pu_pin: pinmux_P8_41_gpio_pu_pin { + pinctrl-single,pins = <0x0b0 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_41_gpio_pd_pin: pinmux_P8_41_gpio_pd_pin { + pinctrl-single,pins = <0x0b0 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_41_pruout_pin: pinmux_P8_41_pruout_pin { + pinctrl-single,pins = <0x0b0 0x05>; }; /* Mode 5, Pull-Down*/ + P8_41_pruin_pin: pinmux_P8_41_pruin_pin { + pinctrl-single,pins = <0x0b0 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_41_hdmi_pin: pinmux_P8_41_hdmi_pin { + pinctrl-single,pins = <0x0b0 0x08>; }; /* lcd_data4.lcd_data4, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + + /* P8_42 (ZCZ ball T2 ) hdmi */ + P8_42_default_pin: pinmux_P8_42_default_pin { + pinctrl-single,pins = <0x0b4 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_42_gpio_pin: pinmux_P8_42_gpio_pin { + pinctrl-single,pins = <0x0b4 0x2F>; }; /* Mode 7, RxActive */ + P8_42_gpio_pu_pin: pinmux_P8_42_gpio_pu_pin { + pinctrl-single,pins = <0x0b4 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_42_gpio_pd_pin: pinmux_P8_42_gpio_pd_pin { + pinctrl-single,pins = <0x0b4 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_42_pruout_pin: pinmux_P8_42_pruout_pin { + pinctrl-single,pins = <0x0b4 0x05>; }; /* Mode 5, Pull-Down*/ + P8_42_pruin_pin: pinmux_P8_42_pruin_pin { + pinctrl-single,pins = <0x0b4 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_42_hdmi_pin: pinmux_P8_42_hdmi_pin { + pinctrl-single,pins = <0x0b4 0x08>; }; /* lcd_data5.lcd_data5, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + + /* P8_43 (ZCZ ball R3 ) hdmi */ + P8_43_default_pin: pinmux_P8_43_default_pin { + pinctrl-single,pins = <0x0a8 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_43_gpio_pin: pinmux_P8_43_gpio_pin { + pinctrl-single,pins = <0x0a8 0x2F>; }; /* Mode 7, RxActive */ + P8_43_gpio_pu_pin: pinmux_P8_43_gpio_pu_pin { + pinctrl-single,pins = <0x0a8 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_43_gpio_pd_pin: pinmux_P8_43_gpio_pd_pin { + pinctrl-single,pins = <0x0a8 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_43_pruout_pin: pinmux_P8_43_pruout_pin { + pinctrl-single,pins = <0x0a8 0x05>; }; /* Mode 5, Pull-Down*/ + P8_43_pruin_pin: pinmux_P8_43_pruin_pin { + pinctrl-single,pins = <0x0a8 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_43_pwm_pin: pinmux_P8_43_pwm_pin { + pinctrl-single,pins = <0x0a8 0x03>; }; /* Mode 3, Pull-Down */ + P8_43_hdmi_pin: pinmux_P8_43_hdmi_pin { + pinctrl-single,pins = <0x0a8 0x08>; }; /* lcd_data2.lcd_data2, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + + /* P8_44 (ZCZ ball R4 ) hdmi */ + P8_44_default_pin: pinmux_P8_44_default_pin { + pinctrl-single,pins = <0x0ac 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_44_gpio_pin: pinmux_P8_44_gpio_pin { + pinctrl-single,pins = <0x0ac 0x2F>; }; /* Mode 7, RxActive */ + P8_44_gpio_pu_pin: pinmux_P8_44_gpio_pu_pin { + pinctrl-single,pins = <0x0ac 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_44_gpio_pd_pin: pinmux_P8_44_gpio_pd_pin { + pinctrl-single,pins = <0x0ac 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_44_pruout_pin: pinmux_P8_44_pruout_pin { + pinctrl-single,pins = <0x0ac 0x05>; }; /* Mode 5, Pull-Down*/ + P8_44_pruin_pin: pinmux_P8_44_pruin_pin { + pinctrl-single,pins = <0x0ac 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_44_pwm_pin: pinmux_P8_44_pwm_pin { + pinctrl-single,pins = <0x0ac 0x23>; }; /* Mode 3, Pull-Down, RxActive */ + P8_44_hdmi_pin: pinmux_P8_44_hdmi_pin { + pinctrl-single,pins = <0x0ac 0x08>; }; /* lcd_data3.lcd_data3, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + + /* P8_45 (ZCZ ball R1 ) hdmi */ + P8_45_default_pin: pinmux_P8_45_default_pin { + pinctrl-single,pins = <0x0a0 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_45_gpio_pin: pinmux_P8_45_gpio_pin { + pinctrl-single,pins = <0x0a0 0x2F>; }; /* Mode 7, RxActive */ + P8_45_gpio_pu_pin: pinmux_P8_45_gpio_pu_pin { + pinctrl-single,pins = <0x0a0 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_45_gpio_pd_pin: pinmux_P8_45_gpio_pd_pin { + pinctrl-single,pins = <0x0a0 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_45_pruout_pin: pinmux_P8_45_pruout_pin { + pinctrl-single,pins = <0x0a0 0x05>; }; /* Mode 5, Pull-Down*/ + P8_45_pruin_pin: pinmux_P8_45_pruin_pin { + pinctrl-single,pins = <0x0a0 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_45_pwm_pin: pinmux_P8_45_pwm_pin { + pinctrl-single,pins = <0x0a0 0x03>; }; /* Mode 3, Pull-Down*/ + P8_45_hdmi_pin: pinmux_P8_45_hdmi_pin { + pinctrl-single,pins = <0x0a0 0x08>; }; /* lcd_data0.lcd_data0, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + + /* P8_46 (ZCZ ball R2 ) hdmi */ + P8_46_default_pin: pinmux_P8_46_default_pin { + pinctrl-single,pins = <0x0a4 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_46_gpio_pin: pinmux_P8_46_gpio_pin { + pinctrl-single,pins = <0x0a4 0x2F>; }; /* Mode 7, RxActive */ + P8_46_gpio_pu_pin: pinmux_P8_46_gpio_pu_pin { + pinctrl-single,pins = <0x0a4 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_46_gpio_pd_pin: pinmux_P8_46_gpio_pd_pin { + pinctrl-single,pins = <0x0a4 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_46_pruout_pin: pinmux_P8_46_pruout_pin { + pinctrl-single,pins = <0x0a4 0x05>; }; /* Mode 5, Pull-Down*/ + P8_46_pruin_pin: pinmux_P8_46_pruin_pin { + pinctrl-single,pins = <0x0a4 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_46_pwm_pin: pinmux_P8_46_pwm_pin { + pinctrl-single,pins = <0x0a4 0x03>; }; /* Mode 3, Pull-Down*/ + P8_46_hdmi_pin: pinmux_P8_46_hdmi_pin { + pinctrl-single,pins = <0x0a4 0x08>; }; /* lcd_data1.lcd_data1, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + + /************************/ + /* P9 Header */ + /************************/ + + /* P9_01 GND */ + /* P9_02 GND */ + /* P9_03 3.3V */ + /* P9_04 3.3V */ + /* P9_05 VDD_5V */ + /* P9_06 VDD_5V */ + /* P9_07 SYS_5V */ + /* P9_08 SYS_5V */ + /* P9_09 PWR_BUT */ + /* P9_10 (ZCZ ball A10) RESETn */ + + /* P9_11 (ZCZ ball T17) */ + P9_11_default_pin: pinmux_P9_11_default_pin { + pinctrl-single,pins = <0x070 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_11_gpio_pin: pinmux_P9_11_gpio_pin { + pinctrl-single,pins = <0x070 0x2F>; }; /* Mode 7, RxActive */ + P9_11_gpio_pu_pin: pinmux_P9_11_gpio_pu_pin { + pinctrl-single,pins = <0x070 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_11_gpio_pd_pin: pinmux_P9_11_gpio_pd_pin { + pinctrl-single,pins = <0x070 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_11_uart_pin: pinmux_P9_11_uart_pin { + pinctrl-single,pins = <0x070 0x36>; }; /* Mode 6, Pull-Up, RxActive */ + + /* P9_12 (ZCZ ball U18) */ + P9_12_default_pin: pinmux_P9_12_default_pin { + pinctrl-single,pins = <0x078 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_12_gpio_pin: pinmux_P9_12_gpio_pin { + pinctrl-single,pins = <0x078 0x2F>; }; /* Mode 7, RxActive */ + P9_12_gpio_pu_pin: pinmux_P9_12_gpio_pu_pin { + pinctrl-single,pins = <0x078 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_12_gpio_pd_pin: pinmux_P9_12_gpio_pd_pin { + pinctrl-single,pins = <0x078 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + + /* P9_13 (ZCZ ball U17) */ + P9_13_default_pin: pinmux_P9_13_default_pin { + pinctrl-single,pins = <0x074 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_13_gpio_pin: pinmux_P9_13_gpio_pin { + pinctrl-single,pins = <0x074 0x2F>; }; /* Mode 7, RxActive */ + P9_13_gpio_pu_pin: pinmux_P9_13_gpio_pu_pin { + pinctrl-single,pins = <0x074 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_13_gpio_pd_pin: pinmux_P9_13_gpio_pd_pin { + pinctrl-single,pins = <0x074 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_13_uart_pin: pinmux_P9_13_uart_pin { + pinctrl-single,pins = <0x074 0x36>; }; /* Mode 6, Pull-Up, RxActive */ + + /* P9_14 (ZCZ ball U14) */ + P9_14_default_pin: pinmux_P9_14_default_pin { + pinctrl-single,pins = <0x048 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_14_gpio_pin: pinmux_P9_14_gpio_pin { + pinctrl-single,pins = <0x048 0x2F>; }; /* Mode 7, RxActive */ + P9_14_gpio_pu_pin: pinmux_P9_14_gpio_pu_pin { + pinctrl-single,pins = <0x048 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_14_gpio_pd_pin: pinmux_P9_14_gpio_pd_pin { + pinctrl-single,pins = <0x048 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_14_pwm_pin: pinmux_P9_14_pwm_pin { + pinctrl-single,pins = <0x048 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + + /* P9_15 (ZCZ ball R13) */ + P9_15_default_pin: pinmux_P9_15_default_pin { + pinctrl-single,pins = <0x040 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_15_gpio_pin: pinmux_P9_15_gpio_pin { + pinctrl-single,pins = <0x040 0x2F>; }; /* Mode 7, RxActive */ + P9_15_gpio_pu_pin: pinmux_P9_15_gpio_pu_pin { + pinctrl-single,pins = <0x040 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_15_gpio_pd_pin: pinmux_P9_15_gpio_pd_pin { + pinctrl-single,pins = <0x040 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_15_pwm_pin: pinmux_P9_15_pwm_pin { + pinctrl-single,pins = <0x040 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + + /* P9_16 (ZCZ ball T14) */ + P9_16_default_pin: pinmux_P9_16_default_pin { + pinctrl-single,pins = <0x04c 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_16_gpio_pin: pinmux_P9_16_gpio_pin { + pinctrl-single,pins = <0x04c 0x2F>; }; /* Mode 7, RxActive */ + P9_16_gpio_pu_pin: pinmux_P9_16_gpio_pu_pin { + pinctrl-single,pins = <0x04c 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_16_gpio_pd_pin: pinmux_P9_16_gpio_pd_pin { + pinctrl-single,pins = <0x04c 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_16_pwm_pin: pinmux_P9_16_pwm_pin { + pinctrl-single,pins = <0x04c 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + + /* P9_17 (ZCZ ball A16) */ + P9_17_default_pin: pinmux_P9_17_default_pin { + pinctrl-single,pins = <0x15c 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_17_gpio_pin: pinmux_P9_17_gpio_pin { + pinctrl-single,pins = <0x15c 0x2F>; }; /* Mode 7, RxActive */ + P9_17_gpio_pu_pin: pinmux_P9_17_gpio_pu_pin { + pinctrl-single,pins = <0x15c 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_17_gpio_pd_pin: pinmux_P9_17_gpio_pd_pin { + pinctrl-single,pins = <0x15c 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_17_spi_pin: pinmux_P9_17_spi_pin { + pinctrl-single,pins = <0x15c 0x30>; }; /* Mode 0, Pull-Up, RxActive */ + P9_17_i2c_pin: pinmux_P9_17_i2c_pin { + pinctrl-single,pins = <0x15c 0x32>; }; /* Mode 2, Pull-Up, RxActive */ + P9_17_pwm_pin: pinmux_P9_17_pwm_pin { + pinctrl-single,pins = <0x15c 0x33>; }; /* Mode 3, Pull-Up, RxActive */ + + /* P9_18 (ZCZ ball B16) */ + P9_18_default_pin: pinmux_P9_18_default_pin { + pinctrl-single,pins = <0x158 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_18_gpio_pin: pinmux_P9_18_gpio_pin { + pinctrl-single,pins = <0x158 0x2F>; }; /* Mode 7, RxActive */ + P9_18_gpio_pu_pin: pinmux_P9_18_gpio_pu_pin { + pinctrl-single,pins = <0x158 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_18_gpio_pd_pin: pinmux_P9_18_gpio_pd_pin { + pinctrl-single,pins = <0x158 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_18_spi_pin: pinmux_P9_18_spi_pin { + pinctrl-single,pins = <0x158 0x30>; }; /* Mode 0, Pull-Up, RxActive */ + P9_18_i2c_pin: pinmux_P9_18_i2c_pin { + pinctrl-single,pins = <0x158 0x32>; }; /* Mode 2, Pull-Up, RxActive */ + P9_18_pwm_pin: pinmux_P9_18_pwm_pin { + pinctrl-single,pins = <0x158 0x33>; }; /* Mode 3, Pull-Up, RxActive */ + + /* P9_19 (ZCZ ball D17) */ + P9_19_default_pin: pinmux_P9_19_default_pin { + pinctrl-single,pins = <0x17c 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_19_gpio_pin: pinmux_P9_19_gpio_pin { + pinctrl-single,pins = <0x17c 0x2F>; }; /* Mode 7, RxActive */ + P9_19_gpio_pu_pin: pinmux_P9_19_gpio_pu_pin { + pinctrl-single,pins = <0x17c 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_19_gpio_pd_pin: pinmux_P9_19_gpio_pd_pin { + pinctrl-single,pins = <0x17c 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_19_can_pin: pinmux_P9_19_can_pin { + pinctrl-single,pins = <0x17c 0x32>; }; /* Mode 2, Pull-Up, RxActive */ + P9_19_i2c_pin: pinmux_P9_19_i2c_pin { + pinctrl-single,pins = <0x17c 0x73>; }; /* (SLEWCTRL_SLOW | PIN_INPUT_PULLUP | MUX_MODE3) */ + + /* P9_20 (ZCZ ball D18) */ + P9_20_default_pin: pinmux_P9_20_default_pin { + pinctrl-single,pins = <0x178 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_20_gpio_pin: pinmux_P9_20_gpio_pin { + pinctrl-single,pins = <0x178 0x2F>; }; /* Mode 7, RxActive */ + P9_20_gpio_pu_pin: pinmux_P9_20_gpio_pu_pin { + pinctrl-single,pins = <0x178 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_20_gpio_pd_pin: pinmux_P9_20_gpio_pd_pin { + pinctrl-single,pins = <0x178 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_20_can_pin: pinmux_P9_20_can_pin { + pinctrl-single,pins = <0x178 0x12>; }; /* Mode 2, Pull-Up, RxActive */ + P9_20_i2c_pin: pinmux_P9_20_i2c_pin { + pinctrl-single,pins = <0x178 0x73>; }; /* (SLEWCTRL_SLOW | PIN_INPUT_PULLUP | MUX_MODE3) */ + + /* P9_21 (ZCZ ball B17) */ + P9_21_default_pin: pinmux_P9_21_default_pin { + pinctrl-single,pins = <0x154 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_21_gpio_pin: pinmux_P9_21_gpio_pin { + pinctrl-single,pins = <0x154 0x2F>; }; /* Mode 7, RxActive */ + P9_21_gpio_pu_pin: pinmux_P9_21_gpio_pu_pin { + pinctrl-single,pins = <0x154 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_21_gpio_pd_pin: pinmux_P9_21_gpio_pd_pin { + pinctrl-single,pins = <0x154 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_21_spi_pin: pinmux_P9_21_spi_pin { + pinctrl-single,pins = <0x154 0x30>; }; /* Mode 0, Pull-Up, RxActive */ + P9_21_uart_pin: pinmux_P9_21_uart_pin { + pinctrl-single,pins = <0x154 0x31>; }; /* Mode 1, Pull-Up, RxActive */ + P9_21_i2c_pin: pinmux_P9_21_i2c_pin { + pinctrl-single,pins = <0x154 0x32>; }; /* Mode 2, Pull-Up, RxActive */ + P9_21_pwm_pin: pinmux_P9_21_pwm_pin { + pinctrl-single,pins = <0x154 0x33>; }; /* Mode 3, Pull-Up, RxActive */ + + /* P9_22 (ZCZ ball A17) */ + P9_22_default_pin: pinmux_P9_22_default_pin { + pinctrl-single,pins = <0x150 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_22_gpio_pin: pinmux_P9_22_gpio_pin { + pinctrl-single,pins = <0x150 0x2F>; }; /* Mode 7, RxActive */ + P9_22_gpio_pu_pin: pinmux_P9_22_gpio_pu_pin { + pinctrl-single,pins = <0x150 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_22_gpio_pd_pin: pinmux_P9_22_gpio_pd_pin { + pinctrl-single,pins = <0x150 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_22_spi_pin: pinmux_P9_22_spi_pin { + pinctrl-single,pins = <0x150 0x30>; }; /* Mode 0, Pull-Up, RxActive */ + P9_22_uart_pin: pinmux_P9_22_uart_pin { + pinctrl-single,pins = <0x150 0x31>; }; /* Mode 1, Pull-Up, RxActive */ + P9_22_i2c_pin: pinmux_P9_22_i2c_pin { + pinctrl-single,pins = <0x150 0x32>; }; /* Mode 2, Pull-Up, RxActive */ + P9_22_pwm_pin: pinmux_P9_22_pwm_pin { + pinctrl-single,pins = <0x150 0x33>; }; /* Mode 3, Pull-Up, RxActive */ + + /* P9_23 (ZCZ ball V14) */ + P9_23_default_pin: pinmux_P9_23_default_pin { + pinctrl-single,pins = <0x044 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_23_gpio_pin: pinmux_P9_23_gpio_pin { + pinctrl-single,pins = <0x044 0x2F>; }; /* Mode 7, RxActive */ + P9_23_gpio_pu_pin: pinmux_P9_23_gpio_pu_pin { + pinctrl-single,pins = <0x044 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_23_gpio_pd_pin: pinmux_P9_23_gpio_pd_pin { + pinctrl-single,pins = <0x044 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_23_pwm_pin: pinmux_P9_23_pwm_pin { + pinctrl-single,pins = <0x044 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + + /* P9_24 (ZCZ ball D15) */ + P9_24_default_pin: pinmux_P9_24_default_pin { + pinctrl-single,pins = <0x184 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_24_gpio_pin: pinmux_P9_24_gpio_pin { + pinctrl-single,pins = <0x184 0x2F>; }; /* Mode 7, RxActive */ + P9_24_gpio_pu_pin: pinmux_P9_24_gpio_pu_pin { + pinctrl-single,pins = <0x184 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_24_gpio_pd_pin: pinmux_P9_24_gpio_pd_pin { + pinctrl-single,pins = <0x184 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_24_uart_pin: pinmux_P9_24_uart_pin { + pinctrl-single,pins = <0x184 0x30>; }; /* Mode 0, Pull-Up, RxActive */ + P9_24_can_pin: pinmux_P9_24_can_pin { + pinctrl-single,pins = <0x184 0x32>; }; /* Mode 2, Pull-Up, RxActive */ + P9_24_i2c_pin: pinmux_P9_24_i2c_pin { + pinctrl-single,pins = <0x184 0x33>; }; /* Mode 3, Pull-Up, RxActive */ + P9_24_pruin_pin: pinmux_P9_24_pruin_pin { + pinctrl-single,pins = <0x184 0x36>; }; /* Mode 6, Pull-Up, RxActive */ + + /* P9_25 (ZCZ ball A14) Audio */ + P9_25_default_pin: pinmux_P9_25_default_pin { + pinctrl-single,pins = <0x1ac 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_25_gpio_pin: pinmux_P9_25_gpio_pin { + pinctrl-single,pins = <0x1ac 0x2F>; }; /* Mode 7, RxActive */ + P9_25_gpio_pu_pin: pinmux_P9_25_gpio_pu_pin { + pinctrl-single,pins = <0x1ac 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_25_gpio_pd_pin: pinmux_P9_25_gpio_pd_pin { + pinctrl-single,pins = <0x1ac 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_25_qep_pin: pinmux_P9_25_qep_pin { + pinctrl-single,pins = <0x1ac 0x21>; }; /* Mode 1, Pull-Down, RxActive */ + P9_25_pruout_pin: pinmux_P9_25_pruout_pin { + pinctrl-single,pins = <0x1ac 0x25>; }; /* Mode 5, Pull-Down, RxActive */ + P9_25_pruin_pin: pinmux_P9_25_pruin_pin { + pinctrl-single,pins = <0x1ac 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P9_25_audio_pin: pinmux_P9_25_audio_pin { + pinctrl-single,pins = <0x1ac (PIN_INPUT_PULLUP | MUX_MODE0)>; }; /* mcasp0_ahclkx.mcasp0_ahclkx */ + + /* P9_26 (ZCZ ball D16) */ + P9_26_default_pin: pinmux_P9_26_default_pin { + pinctrl-single,pins = <0x180 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_26_gpio_pin: pinmux_P9_26_gpio_pin { + pinctrl-single,pins = <0x180 0x2F>; }; /* Mode 7, RxActive */ + P9_26_gpio_pu_pin: pinmux_P9_26_gpio_pu_pin { + pinctrl-single,pins = <0x180 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_26_gpio_pd_pin: pinmux_P9_26_gpio_pd_pin { + pinctrl-single,pins = <0x180 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_26_uart_pin: pinmux_P9_26_uart_pin { + pinctrl-single,pins = <0x180 0x30>; }; /* Mode 0, Pull-Up, RxActive */ + P9_26_can_pin: pinmux_P9_26_can_pin { + pinctrl-single,pins = <0x180 0x12>; }; /* Mode 2, Pull-Up, RxActive */ + P9_26_i2c_pin: pinmux_P9_26_i2c_pin { + pinctrl-single,pins = <0x180 0x33>; }; /* Mode 3, Pull-Up, RxActive */ + P9_26_pruin_pin: pinmux_P9_26_pruin_pin { + pinctrl-single,pins = <0x180 0x36>; }; /* Mode 6, Pull-Up, RxActive */ + + /* P9_27 (ZCZ ball C13) */ + P9_27_default_pin: pinmux_P9_27_default_pin { + pinctrl-single,pins = <0x1a4 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_27_gpio_pin: pinmux_P9_27_gpio_pin { + pinctrl-single,pins = <0x1a4 0x2F>; }; /* Mode 7, RxActive */ + P9_27_gpio_pu_pin: pinmux_P9_27_gpio_pu_pin { + pinctrl-single,pins = <0x1a4 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_27_gpio_pd_pin: pinmux_P9_27_gpio_pd_pin { + pinctrl-single,pins = <0x1a4 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_27_qep_pin: pinmux_P9_27_qep_pin { + pinctrl-single,pins = <0x1a4 0x21>; }; /* Mode 1, Pull-Down, RxActive */ + P9_27_pruout_pin: pinmux_P9_27_pruout_pin { + pinctrl-single,pins = <0x1a4 0x25>; }; /* Mode 5, Pull-Down, RxActive */ + P9_27_pruin_pin: pinmux_P9_27_pruin_pin { + pinctrl-single,pins = <0x1a4 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + + /* P9_28 (ZCZ ball C12) Audio */ + P9_28_default_pin: pinmux_P9_28_default_pin { + pinctrl-single,pins = <0x19c 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_28_gpio_pin: pinmux_P9_28_gpio_pin { + pinctrl-single,pins = <0x19c 0x2F>; }; /* Mode 7, RxActive */ + P9_28_gpio_pu_pin: pinmux_P9_28_gpio_pu_pin { + pinctrl-single,pins = <0x19c 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_28_gpio_pd_pin: pinmux_P9_28_gpio_pd_pin { + pinctrl-single,pins = <0x19c 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_28_pwm_pin: pinmux_P9_28_pwm_pin { + pinctrl-single,pins = <0x19c 0x21>; }; /* Mode 1, Pull-Down, RxActive */ + P9_28_spi_pin: pinmux_P9_28_spi_pin { + pinctrl-single,pins = <0x19c 0x23>; }; /* Mode 3, Pull-Down, RxActive */ + P9_28_pwm2_pin: pinmux_P9_28_pwm2_pin { + pinctrl-single,pins = <0x19c 0x24>; }; /* Mode 4, Pull-Down, RxActive */ + P9_28_pruout_pin: pinmux_P9_28_pruout_pin { + pinctrl-single,pins = <0x19c 0x25>; }; /* Mode 5, Pull-Down, RxActive */ + P9_28_pruin_pin: pinmux_P9_28_pruin_pin { + pinctrl-single,pins = <0x19c 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P9_28_audio_pin: pinmux_P9_28_audio_pin { + pinctrl-single,pins = <0x19c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)>; }; /* mcasp0_ahclkr.mcasp0_axr2 */ + + /* P9_29 (ZCZ ball B13) Audio */ + P9_29_default_pin: pinmux_P9_29_default_pin { + pinctrl-single,pins = <0x194 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_29_gpio_pin: pinmux_P9_29_gpio_pin { + pinctrl-single,pins = <0x194 0x2F>; }; /* Mode 7, RxActive */ + P9_29_gpio_pu_pin: pinmux_P9_29_gpio_pu_pin { + pinctrl-single,pins = <0x194 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_29_gpio_pd_pin: pinmux_P9_29_gpio_pd_pin { + pinctrl-single,pins = <0x194 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_29_pwm_pin: pinmux_P9_29_pwm_pin { + pinctrl-single,pins = <0x194 0x21>; }; /* Mode 1, Pull-Down, RxActive */ + P9_29_spi_pin: pinmux_P9_29_spi_pin { + pinctrl-single,pins = <0x194 0x23>; }; /* Mode 3, Pull-Down, RxActive */ + P9_29_pruout_pin: pinmux_P9_29_pruout_pin { + pinctrl-single,pins = <0x194 0x25>; }; /* Mode 5, Pull-Down, RxActive */ + P9_29_pruin_pin: pinmux_P9_29_pruin_pin { + pinctrl-single,pins = <0x194 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P9_29_audio_pin: pinmux_P9_29_audio_pin { + pinctrl-single,pins = <0x194 (PIN_OUTPUT_PULLUP | MUX_MODE0)>; }; /* mcasp0_fsx.mcasp0_fsx */ + + /* P9_30 (ZCZ ball D12) */ + P9_30_default_pin: pinmux_P9_30_default_pin { + pinctrl-single,pins = <0x198 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_30_gpio_pin: pinmux_P9_30_gpio_pin { + pinctrl-single,pins = <0x198 0x2F>; }; /* Mode 7, RxActive */ + P9_30_gpio_pu_pin: pinmux_P9_30_gpio_pu_pin { + pinctrl-single,pins = <0x198 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_30_gpio_pd_pin: pinmux_P9_30_gpio_pd_pin { + pinctrl-single,pins = <0x198 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_30_pwm_pin: pinmux_P9_30_pwm_pin { + pinctrl-single,pins = <0x198 0x21>; }; /* Mode 1, Pull-Down, RxActive */ + P9_30_spi_pin: pinmux_P9_30_spi_pin { + pinctrl-single,pins = <0x198 0x23>; }; /* Mode 3, Pull-Down, RxActive */ + P9_30_pruout_pin: pinmux_P9_30_pruout_pin { + pinctrl-single,pins = <0x198 0x25>; }; /* Mode 5, Pull-Down, RxActive */ + P9_30_pruin_pin: pinmux_P9_30_pruin_pin { + pinctrl-single,pins = <0x198 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + + /* P9_31 (ZCZ ball A13) Audio */ + P9_31_default_pin: pinmux_P9_31_default_pin { + pinctrl-single,pins = <0x190 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_31_gpio_pin: pinmux_P9_31_gpio_pin { + pinctrl-single,pins = <0x190 0x2F>; }; /* Mode 7, RxActive */ + P9_31_gpio_pu_pin: pinmux_P9_31_gpio_pu_pin { + pinctrl-single,pins = <0x190 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_31_gpio_pd_pin: pinmux_P9_31_gpio_pd_pin { + pinctrl-single,pins = <0x190 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_31_pwm_pin: pinmux_P9_31_pwm_pin { + pinctrl-single,pins = <0x190 0x21>; }; /* Mode 1, Pull-Down, RxActive */ + P9_31_spi_pin: pinmux_P9_31_spi_pin { + pinctrl-single,pins = <0x190 0x23>; }; /* Mode 3, Pull-Down, RxActive */ + P9_31_pruout_pin: pinmux_P9_31_pruout_pin { + pinctrl-single,pins = <0x190 0x25>; }; /* Mode 5, Pull-Down, RxActive */ + P9_31_pruin_pin: pinmux_P9_31_pruin_pin { + pinctrl-single,pins = <0x190 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P9_31_audio_pin: pinmux_P9_31_audio_pin { + pinctrl-single,pins = <0x190 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)>; }; /* mcasp0_aclkx.mcasp0_aclkx */ + + /* P9_32 VADC */ + /* P9_33 (ZCZ ball C8 ) AIN4 */ + /* P9_34 AGND */ + /* P9_35 (ZCZ ball A8 ) AIN6 */ + /* P9_36 (ZCZ ball B8 ) AIN5 */ + /* P9_37 (ZCZ ball B7 ) AIN2 */ + /* P9_38 (ZCZ ball A7 ) AIN3 */ + /* P9_39 (ZCZ ball B6 ) AIN0 */ + /* P9_40 (ZCZ ball C7 ) AIN1 */ + + /* P9_41 (ZCZ ball D14) */ + P9_41_default_pin: pinmux_P9_41_default_pin { + pinctrl-single,pins = <0x1b4 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_41_gpio_pin: pinmux_P9_41_gpio_pin { + pinctrl-single,pins = <0x1b4 0x2F>; }; /* Mode 7, RxActive */ + P9_41_gpio_pu_pin: pinmux_P9_41_gpio_pu_pin { + pinctrl-single,pins = <0x1b4 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_41_gpio_pd_pin: pinmux_P9_41_gpio_pd_pin { + pinctrl-single,pins = <0x1b4 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_41_timer_pin: pinmux_P9_41_timer_pin { + pinctrl-single,pins = <0x1b4 0x24>; }; /* Mode 4, Pull-Down, RxActive */ + P9_41_pruin_pin: pinmux_P9_41_pruin_pin { + pinctrl-single,pins = <0x1b4 0x25>; }; /* Mode 5, Pull-Down, RxActive */ + + /* P9_41.1 */ + /* P9_91 (ZCZ ball D13) */ + P9_91_default_pin: pinmux_P9_91_default_pin { + pinctrl-single,pins = <0x1a8 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_91_gpio_pin: pinmux_P9_91_gpio_pin { + pinctrl-single,pins = <0x1a8 0x2F>; }; /* Mode 7, RxActive */ + P9_91_gpio_pu_pin: pinmux_P9_91_gpio_pu_pin { + pinctrl-single,pins = <0x1a8 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_91_gpio_pd_pin: pinmux_P9_91_gpio_pd_pin { + pinctrl-single,pins = <0x1a8 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_91_qep_pin: pinmux_P9_91_qep_pin { + pinctrl-single,pins = <0x1a8 0x21>; }; /* Mode 1, Pull-Down, RxActive */ + P9_91_pruout_pin: pinmux_P9_91_pruout_pin { + pinctrl-single,pins = <0x1a8 0x25>; }; /* Mode 5, Pull-Down, RxActive */ + P9_91_pruin_pin: pinmux_P9_91_pruin_pin { + pinctrl-single,pins = <0x1a8 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + + /* P9_42 (ZCZ ball C18) */ + P9_42_default_pin: pinmux_P9_42_default_pin { + pinctrl-single,pins = <0x164 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_42_gpio_pin: pinmux_P9_42_gpio_pin { + pinctrl-single,pins = <0x164 0x2F>; }; /* Mode 7, RxActive */ + P9_42_gpio_pu_pin: pinmux_P9_42_gpio_pu_pin { + pinctrl-single,pins = <0x164 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_42_gpio_pd_pin: pinmux_P9_42_gpio_pd_pin { + pinctrl-single,pins = <0x164 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_42_pwm_pin: pinmux_P9_42_pwm_pin { + pinctrl-single,pins = <0x164 0x20>; }; /* Mode 0, Pull-Down, RxActive */ + P9_42_uart_pin: pinmux_P9_42_uart_pin { + pinctrl-single,pins = <0x164 0x21>; }; /* Mode 1, Pull-Down, RxActive */ + P9_42_spics_pin: pinmux_P9_42_spics_pin { + pinctrl-single,pins = <0x164 0x22>; }; /* Mode 2, Pull-Down, RxActive */ + P9_42_spiclk_pin: pinmux_P9_42_spiclk_pin { + pinctrl-single,pins = <0x164 0x24>; }; /* Mode 4, Pull-Down, RxActive */ + + /* P9_42.1 */ + /* P9_92 (ZCZ ball B12) */ + P9_92_default_pin: pinmux_P9_92_default_pin { + pinctrl-single,pins = <0x1a0 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_92_gpio_pin: pinmux_P9_92_gpio_pin { + pinctrl-single,pins = <0x1a0 0x2F>; }; /* Mode 7, RxActive */ + P9_92_gpio_pu_pin: pinmux_P9_92_gpio_pu_pin { + pinctrl-single,pins = <0x1a0 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_92_gpio_pd_pin: pinmux_P9_92_gpio_pd_pin { + pinctrl-single,pins = <0x1a0 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_92_qep_pin: pinmux_P9_92_qep_pin { + pinctrl-single,pins = <0x1a0 0x21>; }; /* Mode 1, Pull-Down, RxActive */ + P9_92_pruout_pin: pinmux_P9_92_pruout_pin { + pinctrl-single,pins = <0x1a0 0x25>; }; /* Mode 5, Pull-Down, RxActive */ + P9_92_pruin_pin: pinmux_P9_92_pruin_pin { + pinctrl-single,pins = <0x1a0 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + + /* P9_43 GND */ + /* P9_44 GND */ + /* P9_45 GND */ + /* P9_46 GND */ +}; + +/**********************************************************************/ +/* Pin Multiplex Helpers */ +/* */ +/* These provide userspace runtime pin configuration for the */ +/* BeagleBone cape expansion headers */ +/**********************************************************************/ + +&ocp { + /************************/ + /* P8 Header */ + /************************/ + + P8_07_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "timer"; + pinctrl-0 = <&P8_07_default_pin>; + pinctrl-1 = <&P8_07_gpio_pin>; + pinctrl-2 = <&P8_07_gpio_pu_pin>; + pinctrl-3 = <&P8_07_gpio_pd_pin>; + pinctrl-4 = <&P8_07_timer_pin>; + }; + + P8_08_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "timer"; + pinctrl-0 = <&P8_08_default_pin>; + pinctrl-1 = <&P8_08_gpio_pin>; + pinctrl-2 = <&P8_08_gpio_pu_pin>; + pinctrl-3 = <&P8_08_gpio_pd_pin>; + pinctrl-4 = <&P8_08_timer_pin>; + }; + + P8_09_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "timer"; + pinctrl-0 = <&P8_09_default_pin>; + pinctrl-1 = <&P8_09_gpio_pin>; + pinctrl-2 = <&P8_09_gpio_pu_pin>; + pinctrl-3 = <&P8_09_gpio_pd_pin>; + pinctrl-4 = <&P8_09_timer_pin>; + }; + + P8_10_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "timer"; + pinctrl-0 = <&P8_10_default_pin>; + pinctrl-1 = <&P8_10_gpio_pin>; + pinctrl-2 = <&P8_10_gpio_pu_pin>; + pinctrl-3 = <&P8_10_gpio_pd_pin>; + pinctrl-4 = <&P8_10_timer_pin>; + }; + + P8_11_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pruout", "qep"; + pinctrl-0 = <&P8_11_default_pin>; + pinctrl-1 = <&P8_11_gpio_pin>; + pinctrl-2 = <&P8_11_gpio_pu_pin>; + pinctrl-3 = <&P8_11_gpio_pd_pin>; + pinctrl-4 = <&P8_11_pruout_pin>; + pinctrl-5 = <&P8_11_qep_pin>; + }; + + P8_12_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pruout", "qep"; + pinctrl-0 = <&P8_12_default_pin>; + pinctrl-1 = <&P8_12_gpio_pin>; + pinctrl-2 = <&P8_12_gpio_pu_pin>; + pinctrl-3 = <&P8_12_gpio_pd_pin>; + pinctrl-4 = <&P8_12_pruout_pin>; + pinctrl-5 = <&P8_12_qep_pin>; + }; + + P8_13_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pwm"; + pinctrl-0 = <&P8_13_default_pin>; + pinctrl-1 = <&P8_13_gpio_pin>; + pinctrl-2 = <&P8_13_gpio_pu_pin>; + pinctrl-3 = <&P8_13_gpio_pd_pin>; + pinctrl-4 = <&P8_13_pwm_pin>; + }; + + P8_14_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pwm"; + pinctrl-0 = <&P8_14_default_pin>; + pinctrl-1 = <&P8_14_gpio_pin>; + pinctrl-2 = <&P8_14_gpio_pu_pin>; + pinctrl-3 = <&P8_14_gpio_pd_pin>; + pinctrl-4 = <&P8_14_pwm_pin>; + }; + + P8_15_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pruin", "qep"; + pinctrl-0 = <&P8_15_default_pin>; + pinctrl-1 = <&P8_15_gpio_pin>; + pinctrl-2 = <&P8_15_gpio_pu_pin>; + pinctrl-3 = <&P8_15_gpio_pd_pin>; + pinctrl-4 = <&P8_15_pruin_pin>; + pinctrl-5 = <&P8_15_qep_pin>; + }; + + P8_16_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pruin", "qep"; + pinctrl-0 = <&P8_16_default_pin>; + pinctrl-1 = <&P8_16_gpio_pin>; + pinctrl-2 = <&P8_16_gpio_pu_pin>; + pinctrl-3 = <&P8_16_gpio_pd_pin>; + pinctrl-4 = <&P8_16_pruin_pin>; + pinctrl-5 = <&P8_16_qep_pin>; + }; + + P8_17_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pwm"; + pinctrl-0 = <&P8_17_default_pin>; + pinctrl-1 = <&P8_17_gpio_pin>; + pinctrl-2 = <&P8_17_gpio_pu_pin>; + pinctrl-3 = <&P8_17_gpio_pd_pin>; + pinctrl-4 = <&P8_17_pwm_pin>; + }; + + P8_18_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&P8_18_default_pin>; + pinctrl-1 = <&P8_18_gpio_pin>; + pinctrl-2 = <&P8_18_gpio_pu_pin>; + pinctrl-3 = <&P8_18_gpio_pd_pin>; + }; + + P8_19_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pwm"; + pinctrl-0 = <&P8_19_default_pin>; + pinctrl-1 = <&P8_19_gpio_pin>; + pinctrl-2 = <&P8_19_gpio_pu_pin>; + pinctrl-3 = <&P8_19_gpio_pd_pin>; + pinctrl-4 = <&P8_19_pwm_pin>; + }; + + P8_26_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&P8_26_default_pin>; + pinctrl-1 = <&P8_26_gpio_pin>; + pinctrl-2 = <&P8_26_gpio_pu_pin>; + pinctrl-3 = <&P8_26_gpio_pd_pin>; + }; + + P8_27_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pruout", "pruin", "hdmi"; + pinctrl-0 = <&P8_27_default_pin>; + pinctrl-1 = <&P8_27_gpio_pin>; + pinctrl-2 = <&P8_27_gpio_pu_pin>; + pinctrl-3 = <&P8_27_gpio_pd_pin>; + pinctrl-4 = <&P8_27_pruout_pin>; + pinctrl-5 = <&P8_27_pruin_pin>; + pinctrl-6 = <&P8_27_hdmi_pin>; + }; + + P8_28_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pruout", "pruin", "hdmi"; + pinctrl-0 = <&P8_28_default_pin>; + pinctrl-1 = <&P8_28_gpio_pin>; + pinctrl-2 = <&P8_28_gpio_pu_pin>; + pinctrl-3 = <&P8_28_gpio_pd_pin>; + pinctrl-4 = <&P8_28_pruout_pin>; + pinctrl-5 = <&P8_28_pruin_pin>; + pinctrl-6 = <&P8_28_hdmi_pin>; + }; + + P8_29_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pruout", "pruin", "hdmi"; + pinctrl-0 = <&P8_29_default_pin>; + pinctrl-1 = <&P8_29_gpio_pin>; + pinctrl-2 = <&P8_29_gpio_pu_pin>; + pinctrl-3 = <&P8_29_gpio_pd_pin>; + pinctrl-4 = <&P8_29_pruout_pin>; + pinctrl-5 = <&P8_29_pruin_pin>; + pinctrl-6 = <&P8_29_hdmi_pin>; + }; + + P8_30_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pruout", "pruin", "hdmi"; + pinctrl-0 = <&P8_30_default_pin>; + pinctrl-1 = <&P8_30_gpio_pin>; + pinctrl-2 = <&P8_30_gpio_pu_pin>; + pinctrl-3 = <&P8_30_gpio_pd_pin>; + pinctrl-4 = <&P8_30_pruout_pin>; + pinctrl-5 = <&P8_30_pruin_pin>; + pinctrl-6 = <&P8_30_hdmi_pin>; + }; + + P8_31_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd","uart", "hdmi"; + pinctrl-0 = <&P8_31_default_pin>; + pinctrl-1 = <&P8_31_gpio_pin>; + pinctrl-2 = <&P8_31_gpio_pu_pin>; + pinctrl-3 = <&P8_31_gpio_pd_pin>; + pinctrl-4 = <&P8_31_uart_pin>; + pinctrl-5 = <&P8_31_hdmi_pin>; + }; + + P8_32_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "hdmi"; + pinctrl-0 = <&P8_32_default_pin>; + pinctrl-1 = <&P8_32_gpio_pin>; + pinctrl-2 = <&P8_32_gpio_pu_pin>; + pinctrl-3 = <&P8_32_gpio_pd_pin>; + pinctrl-4 = <&P8_32_hdmi_pin>; + }; + + P8_33_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "hdmi"; + pinctrl-0 = <&P8_33_default_pin>; + pinctrl-1 = <&P8_33_gpio_pin>; + pinctrl-2 = <&P8_33_gpio_pu_pin>; + pinctrl-3 = <&P8_33_gpio_pd_pin>; + pinctrl-4 = <&P8_33_hdmi_pin>; + }; + + P8_34_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd","pwm", "hdmi"; + pinctrl-0 = <&P8_34_default_pin>; + pinctrl-1 = <&P8_34_gpio_pin>; + pinctrl-2 = <&P8_34_gpio_pu_pin>; + pinctrl-3 = <&P8_34_gpio_pd_pin>; + pinctrl-4 = <&P8_34_pwm_pin>; + pinctrl-5 = <&P8_34_hdmi_pin>; + }; + + P8_35_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "hdmi"; + pinctrl-0 = <&P8_35_default_pin>; + pinctrl-1 = <&P8_35_gpio_pin>; + pinctrl-2 = <&P8_35_gpio_pu_pin>; + pinctrl-3 = <&P8_35_gpio_pd_pin>; + pinctrl-4 = <&P8_35_hdmi_pin>; + }; + + P8_36_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd","pwm", "hdmi"; + pinctrl-0 = <&P8_36_default_pin>; + pinctrl-1 = <&P8_36_gpio_pin>; + pinctrl-2 = <&P8_36_gpio_pu_pin>; + pinctrl-3 = <&P8_36_gpio_pd_pin>; + pinctrl-4 = <&P8_36_pwm_pin>; + pinctrl-5 = <&P8_36_hdmi_pin>; + }; + + P8_37_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd","uart","pwm", "hdmi"; + pinctrl-0 = <&P8_37_default_pin>; + pinctrl-1 = <&P8_37_gpio_pin>; + pinctrl-2 = <&P8_37_gpio_pu_pin>; + pinctrl-3 = <&P8_37_gpio_pd_pin>; + pinctrl-4 = <&P8_37_uart_pin>; + pinctrl-5 = <&P8_37_pwm_pin>; + pinctrl-6 = <&P8_37_hdmi_pin>; + }; + + P8_38_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd","uart","pwm", "hdmi"; + pinctrl-0 = <&P8_38_default_pin>; + pinctrl-1 = <&P8_38_gpio_pin>; + pinctrl-2 = <&P8_38_gpio_pu_pin>; + pinctrl-3 = <&P8_38_gpio_pd_pin>; + pinctrl-4 = <&P8_38_uart_pin>; + pinctrl-5 = <&P8_38_pwm_pin>; + pinctrl-6 = <&P8_38_hdmi_pin>; + }; + + P8_39_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pruout", "pruin", "hdmi"; + pinctrl-0 = <&P8_39_default_pin>; + pinctrl-1 = <&P8_39_gpio_pin>; + pinctrl-2 = <&P8_39_gpio_pu_pin>; + pinctrl-3 = <&P8_39_gpio_pd_pin>; + pinctrl-4 = <&P8_39_pruout_pin>; + pinctrl-5 = <&P8_39_pruin_pin>; + pinctrl-6 = <&P8_39_hdmi_pin>; + }; + + P8_40_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pruout", "pruin", "hdmi"; + pinctrl-0 = <&P8_40_default_pin>; + pinctrl-1 = <&P8_40_gpio_pin>; + pinctrl-2 = <&P8_40_gpio_pu_pin>; + pinctrl-3 = <&P8_40_gpio_pd_pin>; + pinctrl-4 = <&P8_40_pruout_pin>; + pinctrl-5 = <&P8_40_pruin_pin>; + pinctrl-6 = <&P8_40_hdmi_pin>; + }; + + P8_41_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pruout", "pruin", "hdmi"; + pinctrl-0 = <&P8_41_default_pin>; + pinctrl-1 = <&P8_41_gpio_pin>; + pinctrl-2 = <&P8_41_gpio_pu_pin>; + pinctrl-3 = <&P8_41_gpio_pd_pin>; + pinctrl-4 = <&P8_41_pruout_pin>; + pinctrl-5 = <&P8_41_pruin_pin>; + pinctrl-6 = <&P8_41_hdmi_pin>; + }; + + P8_42_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pruout", "pruin", "hdmi"; + pinctrl-0 = <&P8_42_default_pin>; + pinctrl-1 = <&P8_42_gpio_pin>; + pinctrl-2 = <&P8_42_gpio_pu_pin>; + pinctrl-3 = <&P8_42_gpio_pd_pin>; + pinctrl-4 = <&P8_42_pruout_pin>; + pinctrl-5 = <&P8_42_pruin_pin>; + pinctrl-6 = <&P8_42_hdmi_pin>; + }; + + P8_43_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pruout", "pruin","pwm", "hdmi"; + pinctrl-0 = <&P8_43_default_pin>; + pinctrl-1 = <&P8_43_gpio_pin>; + pinctrl-2 = <&P8_43_gpio_pu_pin>; + pinctrl-3 = <&P8_43_gpio_pd_pin>; + pinctrl-4 = <&P8_43_pruout_pin>; + pinctrl-5 = <&P8_43_pruin_pin>; + pinctrl-6 = <&P8_43_pwm_pin>; + pinctrl-7 = <&P8_43_hdmi_pin>; + }; + + P8_44_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pruout", "pruin","pwm", "hdmi"; + pinctrl-0 = <&P8_44_default_pin>; + pinctrl-1 = <&P8_44_gpio_pin>; + pinctrl-2 = <&P8_44_gpio_pu_pin>; + pinctrl-3 = <&P8_44_gpio_pd_pin>; + pinctrl-4 = <&P8_44_pruout_pin>; + pinctrl-5 = <&P8_44_pruin_pin>; + pinctrl-6 = <&P8_44_pwm_pin>; + pinctrl-7 = <&P8_44_hdmi_pin>; + }; + + P8_45_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pruout", "pruin","pwm", "hdmi"; + pinctrl-0 = <&P8_45_default_pin>; + pinctrl-1 = <&P8_45_gpio_pin>; + pinctrl-2 = <&P8_45_gpio_pu_pin>; + pinctrl-3 = <&P8_45_gpio_pd_pin>; + pinctrl-4 = <&P8_45_pruout_pin>; + pinctrl-5 = <&P8_45_pruin_pin>; + pinctrl-6 = <&P8_45_pwm_pin>; + pinctrl-7 = <&P8_45_hdmi_pin>; + }; + + P8_46_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pruout", "pruin","pwm", "hdmi"; + pinctrl-0 = <&P8_46_default_pin>; + pinctrl-1 = <&P8_46_gpio_pin>; + pinctrl-2 = <&P8_46_gpio_pu_pin>; + pinctrl-3 = <&P8_46_gpio_pd_pin>; + pinctrl-4 = <&P8_46_pruout_pin>; + pinctrl-5 = <&P8_46_pruin_pin>; + pinctrl-6 = <&P8_46_pwm_pin>; + pinctrl-7 = <&P8_46_hdmi_pin>; + }; + + /************************/ + /* P9 Header */ + /************************/ + + P9_11_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "uart"; + pinctrl-0 = <&P9_11_default_pin>; + pinctrl-1 = <&P9_11_gpio_pin>; + pinctrl-2 = <&P9_11_gpio_pu_pin>; + pinctrl-3 = <&P9_11_gpio_pd_pin>; + pinctrl-4 = <&P9_11_uart_pin>; + }; + + P9_12_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&P9_12_default_pin>; + pinctrl-1 = <&P9_12_gpio_pin>; + pinctrl-2 = <&P9_12_gpio_pu_pin>; + pinctrl-3 = <&P9_12_gpio_pd_pin>; + }; + + P9_13_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "uart"; + pinctrl-0 = <&P9_13_default_pin>; + pinctrl-1 = <&P9_13_gpio_pin>; + pinctrl-2 = <&P9_13_gpio_pu_pin>; + pinctrl-3 = <&P9_13_gpio_pd_pin>; + pinctrl-4 = <&P9_13_uart_pin>; + }; + + P9_14_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pwm"; + pinctrl-0 = <&P9_14_default_pin>; + pinctrl-1 = <&P9_14_gpio_pin>; + pinctrl-2 = <&P9_14_gpio_pu_pin>; + pinctrl-3 = <&P9_14_gpio_pd_pin>; + pinctrl-4 = <&P9_14_pwm_pin>; + }; + + P9_15_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pwm"; + pinctrl-0 = <&P9_15_default_pin>; + pinctrl-1 = <&P9_15_gpio_pin>; + pinctrl-2 = <&P9_15_gpio_pu_pin>; + pinctrl-3 = <&P9_15_gpio_pd_pin>; + pinctrl-4 = <&P9_15_pwm_pin>; + }; + + P9_16_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pwm"; + pinctrl-0 = <&P9_16_default_pin>; + pinctrl-1 = <&P9_16_gpio_pin>; + pinctrl-2 = <&P9_16_gpio_pu_pin>; + pinctrl-3 = <&P9_16_gpio_pd_pin>; + pinctrl-4 = <&P9_16_pwm_pin>; + }; + + P9_17_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "spi", "i2c", "pwm"; + pinctrl-0 = <&P9_17_default_pin>; + pinctrl-1 = <&P9_17_gpio_pin>; + pinctrl-2 = <&P9_17_gpio_pu_pin>; + pinctrl-3 = <&P9_17_gpio_pd_pin>; + pinctrl-4 = <&P9_17_spi_pin>; + pinctrl-5 = <&P9_17_i2c_pin>; + pinctrl-6 = <&P9_17_pwm_pin>; + }; + + P9_18_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "spi", "i2c", "pwm"; + pinctrl-0 = <&P9_18_default_pin>; + pinctrl-1 = <&P9_18_gpio_pin>; + pinctrl-2 = <&P9_18_gpio_pu_pin>; + pinctrl-3 = <&P9_18_gpio_pd_pin>; + pinctrl-4 = <&P9_18_spi_pin>; + pinctrl-5 = <&P9_18_i2c_pin>; + pinctrl-6 = <&P9_18_pwm_pin>; + }; + + P9_19_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "can", "i2c"; + pinctrl-0 = <&P9_19_default_pin>; + pinctrl-1 = <&P9_19_gpio_pin>; + pinctrl-2 = <&P9_19_gpio_pu_pin>; + pinctrl-3 = <&P9_19_gpio_pd_pin>; + pinctrl-4 = <&P9_19_can_pin>; + pinctrl-5 = <&P9_19_i2c_pin>; + }; + + P9_20_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "can", "i2c"; + pinctrl-0 = <&P9_20_default_pin>; + pinctrl-1 = <&P9_20_gpio_pin>; + pinctrl-2 = <&P9_20_gpio_pu_pin>; + pinctrl-3 = <&P9_20_gpio_pd_pin>; + pinctrl-4 = <&P9_20_can_pin>; + pinctrl-5 = <&P9_20_i2c_pin>; + }; + + P9_21_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "spi", "uart", "i2c", "pwm"; + pinctrl-0 = <&P9_21_default_pin>; + pinctrl-1 = <&P9_21_gpio_pin>; + pinctrl-2 = <&P9_21_gpio_pu_pin>; + pinctrl-3 = <&P9_21_gpio_pd_pin>; + pinctrl-4 = <&P9_21_spi_pin>; + pinctrl-5 = <&P9_21_uart_pin>; + pinctrl-6 = <&P9_21_i2c_pin>; + pinctrl-7 = <&P9_21_pwm_pin>; + }; + + P9_22_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "spi", "uart", "i2c", "pwm"; + pinctrl-0 = <&P9_22_default_pin>; + pinctrl-1 = <&P9_22_gpio_pin>; + pinctrl-2 = <&P9_22_gpio_pu_pin>; + pinctrl-3 = <&P9_22_gpio_pd_pin>; + pinctrl-4 = <&P9_22_spi_pin>; + pinctrl-5 = <&P9_22_uart_pin>; + pinctrl-6 = <&P9_22_i2c_pin>; + pinctrl-7 = <&P9_22_pwm_pin>; + }; + + P9_23_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pwm"; + pinctrl-0 = <&P9_23_default_pin>; + pinctrl-1 = <&P9_23_gpio_pin>; + pinctrl-2 = <&P9_23_gpio_pu_pin>; + pinctrl-3 = <&P9_23_gpio_pd_pin>; + pinctrl-4 = <&P9_23_pwm_pin>; + }; + + P9_24_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "uart", "can", "i2c", "pruin"; + pinctrl-0 = <&P9_24_default_pin>; + pinctrl-1 = <&P9_24_gpio_pin>; + pinctrl-2 = <&P9_24_gpio_pu_pin>; + pinctrl-3 = <&P9_24_gpio_pd_pin>; + pinctrl-4 = <&P9_24_uart_pin>; + pinctrl-5 = <&P9_24_can_pin>; + pinctrl-6 = <&P9_24_i2c_pin>; + pinctrl-7 = <&P9_24_pruin_pin>; + }; + + P9_25_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "qep", "pruout", "pruin", "audio"; + pinctrl-0 = <&P9_25_default_pin>; + pinctrl-1 = <&P9_25_gpio_pin>; + pinctrl-2 = <&P9_25_gpio_pu_pin>; + pinctrl-3 = <&P9_25_gpio_pd_pin>; + pinctrl-4 = <&P9_25_qep_pin>; + pinctrl-5 = <&P9_25_pruout_pin>; + pinctrl-6 = <&P9_25_pruin_pin>; + pinctrl-7 = <&P9_25_audio_pin>; + }; + + P9_26_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "uart", "can", "i2c", "pruin"; + pinctrl-0 = <&P9_26_default_pin>; + pinctrl-1 = <&P9_26_gpio_pin>; + pinctrl-2 = <&P9_26_gpio_pu_pin>; + pinctrl-3 = <&P9_26_gpio_pd_pin>; + pinctrl-4 = <&P9_26_uart_pin>; + pinctrl-5 = <&P9_26_can_pin>; + pinctrl-6 = <&P9_26_i2c_pin>; + pinctrl-7 = <&P9_26_pruin_pin>; + }; + + P9_27_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "qep", "pruout", "pruin"; + pinctrl-0 = <&P9_27_default_pin>; + pinctrl-1 = <&P9_27_gpio_pin>; + pinctrl-2 = <&P9_27_gpio_pu_pin>; + pinctrl-3 = <&P9_27_gpio_pd_pin>; + pinctrl-4 = <&P9_27_qep_pin>; + pinctrl-5 = <&P9_27_pruout_pin>; + pinctrl-6 = <&P9_27_pruin_pin>; + }; + + P9_28_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pwm", "spi", "pwm2", "pruout", "pruin", "audio"; + pinctrl-0 = <&P9_28_default_pin>; + pinctrl-1 = <&P9_28_gpio_pin>; + pinctrl-2 = <&P9_28_gpio_pu_pin>; + pinctrl-3 = <&P9_28_gpio_pd_pin>; + pinctrl-4 = <&P9_28_pwm_pin>; + pinctrl-5 = <&P9_28_spi_pin>; + pinctrl-6 = <&P9_28_pwm2_pin>; + pinctrl-7 = <&P9_28_pruout_pin>; + pinctrl-8 = <&P9_28_pruin_pin>; + pinctrl-9 = <&P9_28_audio_pin>; + }; + + P9_29_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pwm", "spi", "pruout", "pruin", "audio"; + pinctrl-0 = <&P9_29_default_pin>; + pinctrl-1 = <&P9_29_gpio_pin>; + pinctrl-2 = <&P9_29_gpio_pu_pin>; + pinctrl-3 = <&P9_29_gpio_pd_pin>; + pinctrl-4 = <&P9_29_pwm_pin>; + pinctrl-5 = <&P9_29_spi_pin>; + pinctrl-6 = <&P9_29_pruout_pin>; + pinctrl-7 = <&P9_29_pruin_pin>; + pinctrl-8 = <&P9_29_audio_pin>; + }; + + P9_30_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pwm", "spi", "pruout", "pruin"; + pinctrl-0 = <&P9_30_default_pin>; + pinctrl-1 = <&P9_30_gpio_pin>; + pinctrl-2 = <&P9_30_gpio_pu_pin>; + pinctrl-3 = <&P9_30_gpio_pd_pin>; + pinctrl-4 = <&P9_30_pwm_pin>; + pinctrl-5 = <&P9_30_spi_pin>; + pinctrl-6 = <&P9_30_pruout_pin>; + pinctrl-7 = <&P9_30_pruin_pin>; + }; + + P9_31_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pwm", "spi", "pruout", "pruin", "audio"; + pinctrl-0 = <&P9_31_default_pin>; + pinctrl-1 = <&P9_31_gpio_pin>; + pinctrl-2 = <&P9_31_gpio_pu_pin>; + pinctrl-3 = <&P9_31_gpio_pd_pin>; + pinctrl-4 = <&P9_31_pwm_pin>; + pinctrl-5 = <&P9_31_spi_pin>; + pinctrl-6 = <&P9_31_pruout_pin>; + pinctrl-7 = <&P9_31_pruin_pin>; + pinctrl-8 = <&P9_31_audio_pin>; + }; + + P9_41_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "timer", "pruin"; + pinctrl-0 = <&P9_41_default_pin>; + pinctrl-1 = <&P9_41_gpio_pin>; + pinctrl-2 = <&P9_41_gpio_pu_pin>; + pinctrl-3 = <&P9_41_gpio_pd_pin>; + pinctrl-4 = <&P9_41_timer_pin>; + pinctrl-5 = <&P9_41_pruin_pin>; + }; + + P9_91_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "qep", "pruout", "pruin"; + pinctrl-0 = <&P9_91_default_pin>; + pinctrl-1 = <&P9_91_gpio_pin>; + pinctrl-2 = <&P9_91_gpio_pu_pin>; + pinctrl-3 = <&P9_91_gpio_pd_pin>; + pinctrl-4 = <&P9_91_qep_pin>; + pinctrl-5 = <&P9_91_pruout_pin>; + pinctrl-6 = <&P9_91_pruin_pin>; + }; + + P9_42_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pwm", "uart", "spics", "spiclk"; + pinctrl-0 = <&P9_42_default_pin>; + pinctrl-1 = <&P9_42_gpio_pin>; + pinctrl-2 = <&P9_42_gpio_pu_pin>; + pinctrl-3 = <&P9_42_gpio_pd_pin>; + pinctrl-4 = <&P9_42_pwm_pin>; + pinctrl-5 = <&P9_42_uart_pin>; + pinctrl-6 = <&P9_42_spics_pin>; + pinctrl-7 = <&P9_42_spiclk_pin>; + }; + + P9_92_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "qep", "pruout", "pruin"; + pinctrl-0 = <&P9_92_default_pin>; + pinctrl-1 = <&P9_92_gpio_pin>; + pinctrl-2 = <&P9_92_gpio_pu_pin>; + pinctrl-3 = <&P9_92_gpio_pd_pin>; + pinctrl-4 = <&P9_92_qep_pin>; + pinctrl-5 = <&P9_92_pruout_pin>; + pinctrl-6 = <&P9_92_pruin_pin>; + }; + + cape-universal { + compatible = "gpio-of-helper"; + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; + + P8_07 { + gpio-name = "P8_07"; + gpio = <&gpio2 2 0>; + input; + dir-changeable; + }; + P8_08 { + gpio-name = "P8_08"; + gpio = <&gpio2 3 0>; + input; + dir-changeable; + }; + P8_09 { + gpio-name = "P8_09"; + gpio = <&gpio2 5 0>; + input; + dir-changeable; + }; + P8_10 { + gpio-name = "P8_10"; + gpio = <&gpio2 4 0>; + input; + dir-changeable; + }; + P8_11 { + gpio-name = "P8_11"; + gpio = <&gpio1 13 0>; + input; + dir-changeable; + }; + P8_12 { + gpio-name = "P8_12"; + gpio = <&gpio1 12 0>; + input; + dir-changeable; + }; + P8_13 { + gpio-name = "P8_13"; + gpio = <&gpio0 23 0>; + input; + dir-changeable; + }; + P8_14 { + gpio-name = "P8_14"; + gpio = <&gpio0 26 0>; + input; + dir-changeable; + }; + P8_15 { + gpio-name = "P8_15"; + gpio = <&gpio1 15 0>; + input; + dir-changeable; + }; + P8_16 { + gpio-name = "P8_16"; + gpio = <&gpio1 14 0>; + input; + dir-changeable; + }; + P8_17 { + gpio-name = "P8_17"; + gpio = <&gpio0 27 0>; + input; + dir-changeable; + }; + P8_18 { + gpio-name = "P8_18"; + gpio = <&gpio2 1 0>; + input; + dir-changeable; + }; + P8_19 { + gpio-name = "P8_19"; + gpio = <&gpio0 22 0>; + input; + dir-changeable; + }; + + P8_26 { + gpio-name = "P8_26"; + gpio = <&gpio1 29 0>; + input; + dir-changeable; + }; + P8_27 { + gpio-name = "P8_27"; + gpio = <&gpio2 22 0>; + input; + dir-changeable; + }; + P8_28 { + gpio-name = "P8_28"; + gpio = <&gpio2 24 0>; + input; + dir-changeable; + }; + P8_29 { + gpio-name = "P8_29"; + gpio = <&gpio2 23 0>; + input; + dir-changeable; + }; + P8_30 { + gpio-name = "P8_30"; + gpio = <&gpio2 25 0>; + input; + dir-changeable; + }; + P8_31 { + gpio-name = "P8_31"; + gpio = <&gpio0 10 0>; + input; + dir-changeable; + }; + P8_32 { + gpio-name = "P8_32"; + gpio = <&gpio0 11 0>; + input; + dir-changeable; + }; + P8_33 { + gpio-name = "P8_33"; + gpio = <&gpio0 9 0>; + input; + dir-changeable; + }; + P8_34 { + gpio-name = "P8_34"; + gpio = <&gpio2 17 0>; + input; + dir-changeable; + }; + P8_35 { + gpio-name = "P8_35"; + gpio = <&gpio0 8 0>; + input; + dir-changeable; + }; + P8_36 { + gpio-name = "P8_36"; + gpio = <&gpio2 16 0>; + input; + dir-changeable; + }; + P8_37 { + gpio-name = "P8_37"; + gpio = <&gpio2 14 0>; + input; + dir-changeable; + }; + P8_38 { + gpio-name = "P8_38"; + gpio = <&gpio2 15 0>; + input; + dir-changeable; + }; + P8_39 { + gpio-name = "P8_39"; + gpio = <&gpio2 12 0>; + input; + dir-changeable; + }; + P8_40 { + gpio-name = "P8_40"; + gpio = <&gpio2 13 0>; + input; + dir-changeable; + }; + P8_41 { + gpio-name = "P8_41"; + gpio = <&gpio2 10 0>; + input; + dir-changeable; + }; + P8_42 { + gpio-name = "P8_42"; + gpio = <&gpio2 11 0>; + input; + dir-changeable; + }; + P8_43 { + gpio-name = "P8_43"; + gpio = <&gpio2 8 0>; + input; + dir-changeable; + }; + P8_44 { + gpio-name = "P8_44"; + gpio = <&gpio2 9 0>; + input; + dir-changeable; + }; + P8_45 { + gpio-name = "P8_45"; + gpio = <&gpio2 6 0>; + input; + dir-changeable; + }; + P8_46 { + gpio-name = "P8_46"; + gpio = <&gpio2 7 0>; + input; + dir-changeable; + }; + + + P9_11 { + gpio-name = "P9_11"; + gpio = <&gpio0 30 0>; + input; + dir-changeable; + }; + P9_12 { + gpio-name = "P9_12"; + gpio = <&gpio1 28 0>; + input; + dir-changeable; + }; + P9_13 { + gpio-name = "P9_13"; + gpio = <&gpio0 31 0>; + input; + dir-changeable; + }; + P9_14 { + gpio-name = "P9_14"; + gpio = <&gpio1 18 0>; + input; + dir-changeable; + }; + P9_15 { + gpio-name = "P9_15"; + gpio = <&gpio1 16 0>; + input; + dir-changeable; + }; + P9_16 { + gpio-name = "P9_16"; + gpio = <&gpio1 19 0>; + input; + dir-changeable; + }; + P9_17 { + gpio-name = "P9_17"; + gpio = <&gpio0 5 0>; + input; + dir-changeable; + }; + P9_18 { + gpio-name = "P9_18"; + gpio = <&gpio0 4 0>; + input; + dir-changeable; + }; + P9_19 { + gpio-name = "P9_19"; + gpio = <&gpio0 13 0>; + input; + dir-changeable; + }; + P9_20 { + gpio-name = "P9_20"; + gpio = <&gpio0 12 0>; + input; + dir-changeable; + }; + P9_21 { + gpio-name = "P9_21"; + gpio = <&gpio0 3 0>; + input; + dir-changeable; + }; + P9_22 { + gpio-name = "P9_22"; + gpio = <&gpio0 2 0>; + input; + dir-changeable; + }; + P9_23 { + gpio-name = "P9_23"; + gpio = <&gpio1 17 0>; + input; + dir-changeable; + }; + P9_24 { + gpio-name = "P9_24"; + gpio = <&gpio0 15 0>; + input; + dir-changeable; + }; + P9_25 { + gpio-name = "P9_25"; + gpio = <&gpio3 21 0>; + input; + dir-changeable; + }; + P9_26 { + gpio-name = "P9_26"; + gpio = <&gpio0 14 0>; + input; + dir-changeable; + }; + P9_27 { + gpio-name = "P9_27"; + gpio = <&gpio3 19 0>; + input; + dir-changeable; + }; + P9_28 { + gpio-name = "P9_28"; + gpio = <&gpio3 17 0>; + input; + dir-changeable; + }; + P9_29 { + gpio-name = "P9_29"; + gpio = <&gpio3 15 0>; + input; + dir-changeable; + }; + P9_30 { + gpio-name = "P9_30"; + gpio = <&gpio3 16 0>; + input; + dir-changeable; + }; + P9_31 { + gpio-name = "P9_31"; + gpio = <&gpio3 14 0>; + input; + dir-changeable; + }; + P9_41 { + gpio-name = "P9_41"; + gpio = <&gpio0 20 0>; + input; + dir-changeable; + }; + P9_91 { + gpio-name = "P9_91"; + gpio = <&gpio3 20 0>; + input; + dir-changeable; + }; + P9_42 { + gpio-name = "P9_42"; + gpio = <&gpio0 7 0>; + input; + dir-changeable; + }; + P9_92 { + gpio-name = "P9_92"; + gpio = <&gpio3 18 0>; + input; + dir-changeable; + }; + }; +}; diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi index e247c15..56e2120 100644 --- a/arch/arm/boot/dts/am335x-bone-common.dtsi +++ b/arch/arm/boot/dts/am335x-bone-common.dtsi @@ -29,14 +29,14 @@ compatible = "gpio-leds"; led@2 { - label = "beaglebone:green:heartbeat"; + label = "beaglebone:green:usr0"; gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; default-state = "off"; }; led@3 { - label = "beaglebone:green:mmc0"; + label = "beaglebone:green:usr1"; gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>; linux,default-trigger = "mmc0"; default-state = "off"; @@ -66,9 +66,6 @@ }; &am33xx_pinmux { - pinctrl-names = "default"; - pinctrl-0 = <&clkout2_pin>; - user_leds_s0: user_leds_s0 { pinctrl-single,pins = < AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */ @@ -99,15 +96,11 @@ >; }; - clkout2_pin: pinmux_clkout2_pin { - pinctrl-single,pins = < - AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */ - >; - }; - cpsw_default: cpsw_default { pinctrl-single,pins = < /* Slave 1 */ + 0x108 (PIN_INPUT | MUX_MODE0) /* mii1_col.mii1_col */ + 0x10c (PIN_INPUT | MUX_MODE0) /* mii1_crs.mii1_crs */ AM33XX_IOPAD(0x910, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxerr.mii1_rxerr */ AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txen.mii1_txen */ AM33XX_IOPAD(0x918, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxdv.mii1_rxdv */ @@ -127,6 +120,8 @@ cpsw_sleep: cpsw_sleep { pinctrl-single,pins = < /* Slave 1 reset value */ + 0x108 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7) AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7) AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7) AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7) @@ -312,6 +307,9 @@ */ ti,pmic-shutdown-controller; + interrupt-parent = <&intc>; + interrupts = <7>; /* NNMI */ + regulators { dcdc1_reg: regulator@0 { regulator-name = "vdds_dpr"; @@ -393,3 +391,32 @@ &sham { status = "okay"; }; + +&rtc { + system-power-controller; +}; + +/* the cape manager */ +/ { + bone_capemgr { + compatible = "ti,bone-capemgr"; + status = "okay"; + + nvmem-cells = <&baseboard_data &cape0_data &cape1_data &cape2_data &cape3_data>; + nvmem-cell-names = "baseboard", "slot0", "slot1", "slot2", "slot3"; + #slots = <4>; + + /* map board revisions to compatible definitions */ + baseboardmaps { + baseboard_beaglebone: board@0 { + board-name = "A335BONE"; + compatible-name = "ti,beaglebone"; + }; + + baseboard_beaglebone_black: board@1 { + board-name = "A335BNLT"; + compatible-name = "ti,beaglebone-black"; + }; + }; + }; +}; diff --git b/arch/arm/boot/dts/am335x-bone-emmc-in-reset.dtsi b/arch/arm/boot/dts/am335x-bone-emmc-in-reset.dtsi new file mode 100644 index 0000000..7d8f673 --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-emmc-in-reset.dtsi @@ -0,0 +1,18 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* standard */ + +&gpio1 { + emmc_rst { + gpio-hog; + gpios = <20 0>; + output-high; + line-name = "EMMC ResetN"; + }; +}; diff --git b/arch/arm/boot/dts/am335x-bone-jtag.dtsi b/arch/arm/boot/dts/am335x-bone-jtag.dtsi new file mode 100644 index 0000000..603ef0a --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-jtag.dtsi @@ -0,0 +1,20 @@ +/* + * Device Tree Source for bone jtag + * + * Copyright (C) 2015 Robert Nelson + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&am33xx_pinmux { + pinctrl-names = "default"; + pinctrl-0 = <&clkout2_pin>; + + clkout2_pin: pinmux_clkout2_pin { + pinctrl-single,pins = < + AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */ + >; + }; +}; diff --git b/arch/arm/boot/dts/am335x-bone-pinmux-can0.dtsi b/arch/arm/boot/dts/am335x-bone-pinmux-can0.dtsi new file mode 100644 index 0000000..0961216 --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-pinmux-can0.dtsi @@ -0,0 +1,45 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include "am335x-peripheral-can0.dtsi" + +/* cape universal */ + +/* + *&ocp { + * P9_19_pinmux { + * mode = "can"; + * }; + * P9_20_pinmux { + * mode = "can"; + * }; + *}; + * + *&dcan0 { + * pinctrl-0 = <>; + *}; + * + */ + +/* standard */ + +&am33xx_pinmux { + dcan0_pins: pinmux_dcan0_pins { + pinctrl-single,pins = < + /* P9_20: uart1_ctsn.d_can0_tx */ + BONE_P9_20 (PIN_OUTPUT_PULLUP | MUX_MODE2) + /* P9_19: uart1_rtsn.d_can0_rx */ + BONE_P9_19 (PIN_INPUT_PULLUP | MUX_MODE2) + >; + }; +}; + +&dcan0 { + pinctrl-0 = <&dcan0_pins>; +}; diff --git b/arch/arm/boot/dts/am335x-bone-pinmux-can1.dtsi b/arch/arm/boot/dts/am335x-bone-pinmux-can1.dtsi new file mode 100644 index 0000000..9e26413 --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-pinmux-can1.dtsi @@ -0,0 +1,45 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include "am335x-peripheral-can1.dtsi" + +/* cape universal */ + +/* + *&ocp { + * P9_24_pinmux { + * mode = "can"; + * }; + * P9_26_pinmux { + * mode = "can"; + * }; + *}; + * + *&dcan1 { + * pinctrl-0 = <>; + *}; + * + */ + +/* standard */ + +&am33xx_pinmux { + dcan1_pins: pinmux_dcan1_pins { + pinctrl-single,pins = < + /* P9_26: uart1_rxd.d_can1_tx */ + BONE_P9_26 (PIN_OUTPUT_PULLUP | MUX_MODE2) + /* P9_24: uart1_txd.d_can1_rx */ + BONE_P9_24 (PIN_INPUT_PULLUP | MUX_MODE2) + >; + }; +}; + +&dcan1 { + pinctrl-0 = <&dcan1_pins>; +}; diff --git b/arch/arm/boot/dts/am335x-bone-pinmux-emmc.dtsi b/arch/arm/boot/dts/am335x-bone-pinmux-emmc.dtsi new file mode 100644 index 0000000..22cf462 --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-pinmux-emmc.dtsi @@ -0,0 +1,88 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* Testing */ +/* lsblk */ + +#include +#include "am335x-peripheral-emmc.dtsi" + +/* cape universal */ + +/* + *&ocp { + * P8_21_pinmux { + * state = "disabled"; + * }; + * P8_20_pinmux { + * state = "disabled"; + * }; + * P8_25_pinmux { + * state = "disabled"; + * }; + * P8_24_pinmux { + * state = "disabled"; + * }; + * P8_05_pinmux { + * state = "disabled"; + * }; + * P8_06_pinmux { + * state = "disabled"; + * }; + * P8_23_pinmux { + * state = "disabled"; + * }; + * P8_22_pinmux { + * state = "disabled"; + * }; + * P8_03_pinmux { + * state = "disabled"; + * }; + * P8_04_pinmux { + * state = "disabled"; + * }; + *}; + * + *&mmc2 { + * pinctrl-0 = <>; + *}; + * + */ + +/* standard */ + +&am33xx_pinmux { + emmc_pins: pinmux_emmc_pins { + pinctrl-single,pins = < + /* P8_21: gpmc_csn1.mmc1_clk */ + BONE_P8_21 (PIN_INPUT_PULLUP | MUX_MODE2) + /* P8_20: gpmc_csn2.mmc1_cmd */ + BONE_P8_20 (PIN_INPUT_PULLUP | MUX_MODE2) + /* P8_25: gpmc_ad0.mmc1_dat0 */ + BONE_P8_25 (PIN_INPUT_PULLUP | MUX_MODE1) + /* P8_24: gpmc_ad1.mmc1_dat1 */ + BONE_P8_24 (PIN_INPUT_PULLUP | MUX_MODE1) + /* P8_05: gpmc_ad2.mmc1_dat2 */ + BONE_P8_05 (PIN_INPUT_PULLUP | MUX_MODE1) + /* P8_06: gpmc_ad3.mmc1_dat3 */ + BONE_P8_06 (PIN_INPUT_PULLUP | MUX_MODE1) + /* P8_23: gpmc_ad4.mmc1_dat4 */ + BONE_P8_23 (PIN_INPUT_PULLUP | MUX_MODE1) + /* P8_22: gpmc_ad5.mmc1_dat5 */ + BONE_P8_22 (PIN_INPUT_PULLUP | MUX_MODE1) + /* P8_03: gpmc_ad6.mmc1_dat6 */ + BONE_P8_03 (PIN_INPUT_PULLUP | MUX_MODE1) + /* P8_04: gpmc_ad7.mmc1_dat7 */ + BONE_P8_04 (PIN_INPUT_PULLUP | MUX_MODE1) + >; + }; +}; + +&mmc2 { + pinctrl-0 = <&emmc_pins>; +}; diff --git b/arch/arm/boot/dts/am335x-bone-pinmux-i2c2.dtsi b/arch/arm/boot/dts/am335x-bone-pinmux-i2c2.dtsi new file mode 100644 index 0000000..abf3b57 --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-pinmux-i2c2.dtsi @@ -0,0 +1,45 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include "am335x-peripheral-i2c2.dtsi" + +/* cape universal */ + +/* + *&ocp { + * P9_19_pinmux { + * mode = "i2c"; + * }; + * P9_20_pinmux { + * mode = "i2c"; + * }; + *}; + * + *&dcan0 { + * pinctrl-0 = <>; + *}; + * + */ + +/* standard */ + +&am33xx_pinmux { + i2c2_pins: pinmux_i2c2_pins { + pinctrl-single,pins = < + /* P9_20: uart1_ctsn.i2c2_sda */ + BONE_P9_20 (SLEWCTRL_SLOW | PIN_INPUT_PULLUP | MUX_MODE3) + /* P9_19: uart1_rtsn.i2c2_scl */ + BONE_P9_19 (SLEWCTRL_SLOW | PIN_INPUT_PULLUP | MUX_MODE3) + >; + }; +}; + +&i2c2 { + pinctrl-0 = <&i2c2_pins>; +}; diff --git b/arch/arm/boot/dts/am335x-bone-pinmux-nxp-hdmi.dtsi b/arch/arm/boot/dts/am335x-bone-pinmux-nxp-hdmi.dtsi new file mode 100644 index 0000000..5205fa0 --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-pinmux-nxp-hdmi.dtsi @@ -0,0 +1,120 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "am335x-peripheral-nxp-hdmi.dtsi" + +/* cape universal */ + +/* + *&ocp { + * P8_27_pinmux { + * state = "disabled"; + * }; + * P8_28_pinmux { + * state = "disabled"; + * }; + * P8_29_pinmux { + * state = "disabled"; + * }; + * P8_30_pinmux { + * state = "disabled"; + * }; + * P8_31_pinmux { + * state = "disabled"; + * }; + * P8_32_pinmux { + * state = "disabled"; + * }; + * P8_33_pinmux { + * state = "disabled"; + * }; + * P8_34_pinmux { + * state = "disabled"; + * }; + * P8_35_pinmux { + * state = "disabled"; + * }; + * P8_36_pinmux { + * state = "disabled"; + * }; + * P8_37_pinmux { + * state = "disabled"; + * }; + * P8_38_pinmux { + * state = "disabled"; + * }; + * P8_39_pinmux { + * state = "disabled"; + * }; + * P8_40_pinmux { + * state = "disabled"; + * }; + * P8_41_pinmux { + * state = "disabled"; + * }; + * P8_42_pinmux { + * state = "disabled"; + * }; + * P8_43_pinmux { + * state = "disabled"; + * }; + * P8_44_pinmux { + * state = "disabled"; + * }; + * P8_45_pinmux { + * state = "disabled"; + * }; + * P8_46_pinmux { + * state = "disabled"; + * }; + *}; + */ + +/* standard */ + +&am33xx_pinmux { + nxp_hdmi_pins: pinmux_nxp_hdmi_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr0 */ + AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */ + AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */ + AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */ + AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */ + AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */ + AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */ + AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */ + AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */ + AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */ + AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */ + AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */ + AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */ + AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */ + AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */ + AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */ + AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */ + AM33XX_IOPAD(0x8e0, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_vsync.lcd_vsync */ + AM33XX_IOPAD(0x8e4, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_hsync.lcd_hsync */ + AM33XX_IOPAD(0x8e8, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_pclk.lcd_pclk */ + AM33XX_IOPAD(0x8ec, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */ + >; + }; + + nxp_hdmi_off_pins: nxp_hdmi_off_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr0 */ + >; + }; +}; + +&i2c0 { + tda19988 { + pinctrl-names = "default", "off"; + pinctrl-0 = <&nxp_hdmi_bonelt_pins>; + pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>; + }; +}; diff --git b/arch/arm/boot/dts/am335x-bone-pinmux-panel-1024x600-24bit.dtsi b/arch/arm/boot/dts/am335x-bone-pinmux-panel-1024x600-24bit.dtsi new file mode 100644 index 0000000..65e5fbb --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-pinmux-panel-1024x600-24bit.dtsi @@ -0,0 +1,151 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include "am335x-peripheral-panel-1024x600-24bit.dtsi" + +/* cape universal */ + +/* + *&ocp { + * P8_27_pinmux { + * state = "disabled"; + * }; + * P8_28_pinmux { + * state = "disabled"; + * }; + * P8_29_pinmux { + * state = "disabled"; + * }; + * P8_30_pinmux { + * state = "disabled"; + * }; + * P8_31_pinmux { + * state = "disabled"; + * }; + * P8_32_pinmux { + * state = "disabled"; + * }; + * P8_33_pinmux { + * state = "disabled"; + * }; + * P8_34_pinmux { + * state = "disabled"; + * }; + * P8_35_pinmux { + * state = "disabled"; + * }; + * P8_36_pinmux { + * state = "disabled"; + * }; + * P8_37_pinmux { + * state = "disabled"; + * }; + * P8_38_pinmux { + * state = "disabled"; + * }; + * P8_39_pinmux { + * state = "disabled"; + * }; + * P8_40_pinmux { + * state = "disabled"; + * }; + * P8_41_pinmux { + * state = "disabled"; + * }; + * P8_42_pinmux { + * state = "disabled"; + * }; + * P8_43_pinmux { + * state = "disabled"; + * }; + * P8_44_pinmux { + * state = "disabled"; + * }; + * P8_45_pinmux { + * state = "disabled"; + * }; + * P8_46_pinmux { + * state = "disabled"; + * }; + *}; + */ + +/* standard */ + +&am33xx_pinmux { + lcd_24bit_pins: pinmux_lcd_24bit_pins { + pinctrl-single,pins = < + + /* P8_45: lcd_data0.lcd_data0 */ + BONE_P8_45 (PIN_OUTPUT | MUX_MODE0) + /* P8_46: lcd_data1.lcd_data1 */ + BONE_P8_46 (PIN_OUTPUT | MUX_MODE0) + /* P8_43: lcd_data2.lcd_data2 */ + BONE_P8_43 (PIN_OUTPUT | MUX_MODE0) + /* P8_44: lcd_data3.lcd_data3 */ + BONE_P8_44 (PIN_OUTPUT | MUX_MODE0) + /* P8_41: lcd_data4.lcd_data4 */ + BONE_P8_41 (PIN_OUTPUT | MUX_MODE0) + /* P8_42: lcd_data5.lcd_data5 */ + BONE_P8_42 (PIN_OUTPUT | MUX_MODE0) + /* P8_39: lcd_data6.lcd_data6 */ + BONE_P8_39 (PIN_OUTPUT | MUX_MODE0) + /* P8_40: lcd_data7.lcd_data7 */ + BONE_P8_40 (PIN_OUTPUT | MUX_MODE0) + /* P8_37: lcd_data8.lcd_data8 */ + BONE_P8_37 (PIN_OUTPUT | MUX_MODE0) + /* P8_38: lcd_data9.lcd_data9 */ + BONE_P8_38 (PIN_OUTPUT | MUX_MODE0) + /* P8_36: lcd_data10.lcd_data10 */ + BONE_P8_36 (PIN_OUTPUT | MUX_MODE0) + /* P8_34: lcd_data11.lcd_data11 */ + BONE_P8_34 (PIN_OUTPUT | MUX_MODE0) + /* P8_35: lcd_data12.lcd_data12 */ + BONE_P8_35 (PIN_OUTPUT | MUX_MODE0) + /* P8_33: lcd_data13.lcd_data13 */ + BONE_P8_33 (PIN_OUTPUT | MUX_MODE0) + /* P8_31: lcd_data14.lcd_data14 */ + BONE_P8_31 (PIN_OUTPUT | MUX_MODE0) + /* P8_32: lcd_data15.lcd_data15 */ + BONE_P8_32 (PIN_OUTPUT | MUX_MODE0) + + /* gpmc_ad15.lcd_data16 */ + BONE_P8_15 (PIN_OUTPUT | MUX_MODE1) + /* gpmc_ad14.lcd_data17 */ + BONE_P8_16 (PIN_OUTPUT | MUX_MODE1) + /* gpmc_ad13.lcd_data18 */ + BONE_P8_11 (PIN_OUTPUT | MUX_MODE1) + /* gpmc_ad12.lcd_data19 */ + BONE_P8_12 (PIN_OUTPUT | MUX_MODE1) + /* gpmc_ad11.lcd_data20 */ + BONE_P8_17 (PIN_OUTPUT | MUX_MODE1) + /* gpmc_ad10.lcd_data21 */ + BONE_P8_14 (PIN_OUTPUT | MUX_MODE1) + /* gpmc_ad9.lcd_data22 */ + BONE_P8_13 (PIN_OUTPUT | MUX_MODE1) + /* gpmc_ad8.lcd_data23 */ + BONE_P8_19 (PIN_OUTPUT | MUX_MODE1) + + /* P8_27: lcd_vsync.lcd_vsync */ + BONE_P8_27 (PIN_OUTPUT | MUX_MODE0) + /* P8_29: lcd_hsync.lcd_hsync */ + BONE_P8_29 (PIN_OUTPUT | MUX_MODE0) + /* P8_28: lcd_pclk.lcd_pclk*/ + BONE_P8_28 (PIN_OUTPUT | MUX_MODE0) + /* P8_30: lcd_ac_bias_en.lcd_ac_bias_en */ + BONE_P8_30 (PIN_OUTPUT | MUX_MODE0) + >; + }; +}; + +/ { + panel { + pinctrl-0 = <&lcd_24bit_pins>; + }; +}; diff --git b/arch/arm/boot/dts/am335x-bone-pinmux-spi0.dtsi b/arch/arm/boot/dts/am335x-bone-pinmux-spi0.dtsi new file mode 100644 index 0000000..354e66a --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-pinmux-spi0.dtsi @@ -0,0 +1,51 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include "am335x-peripheral-spi0.dtsi" + +/* cape universal */ + +/* + *&ocp { + * P9_17_pinmux { + * status = "disabled"; + * }; + * P9_18_pinmux { + * status = "disabled"; + * }; + * P9_21_pinmux { + * status = "disabled"; + * }; + * P9_22_pinmux { + * status = "disabled"; + * }; + *}; + * + *&spi0 { + * pinctrl-0 = <>; + *}; + * + */ + +/* standard */ + +&am33xx_pinmux { + spi0_pins: pinmux_spi0_pins { + pinctrl-single,pins = < + 0x150 (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_sclk.spi0_sclk */ + 0x154 (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d0.spi0_d0 */ + 0x158 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* spi0_d1.spi0_d1 */ + 0x15c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* spi0_cs0.spi0_cs0 */ + >; + }; +}; + +&spi0 { + pinctrl-0 = <&spi0_pins>; +}; diff --git b/arch/arm/boot/dts/am335x-bone-pinmux-spi1.dtsi b/arch/arm/boot/dts/am335x-bone-pinmux-spi1.dtsi new file mode 100644 index 0000000..bff7f8d --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-pinmux-spi1.dtsi @@ -0,0 +1,27 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include "am335x-peripheral-spi1.dtsi" + +/* standard */ + +&am33xx_pinmux { + spi1_pins: pinmux_spi1_pins { + pinctrl-single,pins = < + 0x190 0x33 /* mcasp0_aclkx.spi1_sclk, INPUT_PULLUP | MODE3 */ + 0x194 0x33 /* mcasp0_fsx.spi1_d0, INPUT_PULLUP | MODE3 */ + 0x198 0x13 /* mcasp0_axr0.spi1_d1, OUTPUT_PULLUP | MODE3 */ + 0x19c 0x13 /* mcasp0_ahclkr.spi1_cs0, OUTPUT_PULLUP | MODE3 */ + // 0x164 0x12 /* eCAP0_in_PWM0_out.spi1_cs1 OUTPUT_PULLUP | MODE2 */ >; + }; +}; + +&spi1 { + pinctrl-0 = <&spi1_pins>; +}; diff --git b/arch/arm/boot/dts/am335x-bone-pinmux-spi1a.dtsi b/arch/arm/boot/dts/am335x-bone-pinmux-spi1a.dtsi new file mode 100644 index 0000000..62874c8 --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-pinmux-spi1a.dtsi @@ -0,0 +1,28 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include "am335x-peripheral-spi1.dtsi" + +/* standard */ + +&am33xx_pinmux { + spi1a_pins: pinmux_spi1a_pins { + pinctrl-single,pins = < + 0x164 0x34 /* eCAP0_in_PWM0_out.spi1_sclk, INPUT_PULLUP | MODE4 */ + /* NOTE: P9.42 is connected to two pads */ + // 0x1A0 0x27 /* set the other pad to gpio input */ + 0x194 0x33 /* mcasp0_fsx.spi1_d0, INPUT_PULLUP | MODE3 */ + 0x198 0x13 /* mcasp0_axr0.spi1_d1, OUTPUT_PULLUP | MODE3 */ + 0x178 0x14 /* uart1_ctsn.spi1_cs0, OUTPUT_PULLUP | MODE4 */ >; + }; +}; + +&spi1 { + pinctrl-0 = <&spi1a_pins>; +}; diff --git b/arch/arm/boot/dts/am335x-bone-pinmux-ttyS1.dtsi b/arch/arm/boot/dts/am335x-bone-pinmux-ttyS1.dtsi new file mode 100644 index 0000000..ae5b813 --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-pinmux-ttyS1.dtsi @@ -0,0 +1,48 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* Testing */ +/* sudo /sbin/getty -L ttyS1 115200 vt102 */ + +#include +#include "am335x-peripheral-ttyS1.dtsi" + +/* cape universal */ + +/* + *&ocp { + * P9_24_pinmux { + * mode = "uart"; + * }; + * P9_26_pinmux { + * mode = "uart"; + * }; + *}; + * + *&uart1 { + * pinctrl-0 = <>; + *}; + * + */ + +/* standard */ + +&am33xx_pinmux { + uart1_pins: pinmux_uart1_pins { + pinctrl-single,pins = < + /* P9_24: uart1_txd.uart1_txd */ + BONE_P9_24 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) + /* P9_26: uart1_rxd.uart1_rxd */ + BONE_P9_26 (PIN_INPUT_PULLUP | MUX_MODE0) + >; + }; +}; + +&uart1 { + pinctrl-0 = <&uart1_pins>; +}; diff --git b/arch/arm/boot/dts/am335x-bone-pinmux-ttyS2.dtsi b/arch/arm/boot/dts/am335x-bone-pinmux-ttyS2.dtsi new file mode 100644 index 0000000..5fa593a --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-pinmux-ttyS2.dtsi @@ -0,0 +1,48 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* Testing */ +/* sudo /sbin/getty -L ttyS2 115200 vt102 */ + +#include +#include "am335x-peripheral-ttyS2.dtsi" + +/* cape universal */ + +/* + *&ocp { + * P9_21_pinmux { + * mode = "uart"; + * }; + * P9_22_pinmux { + * mode = "uart"; + * }; + *}; + * + *&uart2 { + * pinctrl-0 = <>; + *}; + * + */ + +/* standard */ + +&am33xx_pinmux { + uart2_pins: pinmux_uart2_pins { + pinctrl-single,pins = < + /* P9_21: spi0_d0.uart2_txd */ + BONE_P9_21 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) + /* P9_22: spi0_sclk.uart2_rxd */ + BONE_P9_22 (PIN_INPUT_PULLUP | MUX_MODE1) + >; + }; +}; + +&uart2 { + pinctrl-0 = <&uart2_pins>; +}; diff --git b/arch/arm/boot/dts/am335x-bone-pinmux-ttyS4.dtsi b/arch/arm/boot/dts/am335x-bone-pinmux-ttyS4.dtsi new file mode 100644 index 0000000..1d22a95 --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-pinmux-ttyS4.dtsi @@ -0,0 +1,48 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* Testing */ +/* sudo /sbin/getty -L ttyS4 115200 vt102 */ + +#include +#include "am335x-peripheral-ttyS4.dtsi" + +/* cape universal */ + +/* + *&ocp { + * P9_11_pinmux { + * mode = "uart"; + * }; + * P9_13_pinmux { + * mode = "uart"; + * }; + *}; + * + *&uart4 { + * pinctrl-0 = <>; + *}; + * + */ + +/* standard */ + +&am33xx_pinmux { + uart4_pins: pinmux_uart4_pins { + pinctrl-single,pins = < + /* P9_11: gpmc_wait0.uart4_rxd_mux2 */ + BONE_P9_11 (PIN_INPUT_PULLUP | MUX_MODE6) + /* P9_13: gpmc_wpn.uart4_txd_mux2 */ + BONE_P9_13 (PIN_OUTPUT_PULLDOWN | MUX_MODE6) + >; + }; +}; + +&uart4 { + pinctrl-0 = <&uart4_pins>; +}; diff --git b/arch/arm/boot/dts/am335x-bone-pinmux-ttyS5.dtsi b/arch/arm/boot/dts/am335x-bone-pinmux-ttyS5.dtsi new file mode 100644 index 0000000..01d0aec --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-pinmux-ttyS5.dtsi @@ -0,0 +1,48 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* Testing */ +/* sudo /sbin/getty -L ttyS5 115200 vt102 */ + +#include +#include "am335x-peripheral-ttyS5.dtsi" + +/* cape universal */ + +/* + *&ocp { + * P8_37_pinmux { + * mode = "uart"; + * }; + * P8_38_pinmux { + * mode = "uart"; + * }; + *}; + * + *&uart5 { + * pinctrl-0 = <>; + *}; + * + */ + +/* standard */ + +&am33xx_pinmux { + uart5_pins: pinmux_uart5_pins { + pinctrl-single,pins = < + /* P8_38: lcd_data9.uart5_rxd */ + BONE_P8_38 (PIN_INPUT_PULLUP | MUX_MODE4) + /* P8_37: lcd_data8.uart5_txd */ + BONE_P8_37 (PIN_OUTPUT_PULLDOWN | MUX_MODE4) + >; + }; +}; + +&uart5 { + pinctrl-0 = <&uart5_pins>; +}; diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts index 6b84937..8b6256d 100644 --- a/arch/arm/boot/dts/am335x-bone.dts +++ b/arch/arm/boot/dts/am335x-bone.dts @@ -9,6 +9,8 @@ #include "am33xx.dtsi" #include "am335x-bone-common.dtsi" +/* #include "am33xx-overlay-edma-fix.dtsi" */ +/* #include "am335x-bone-jtag.dtsi" */ / { model = "TI AM335x BeagleBone"; diff --git b/arch/arm/boot/dts/am335x-boneblack-audio.dts b/arch/arm/boot/dts/am335x-boneblack-audio.dts new file mode 100644 index 0000000..44e9f9c --- /dev/null +++ b/arch/arm/boot/dts/am335x-boneblack-audio.dts @@ -0,0 +1,50 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am335x-bone-common.dtsi" + +/ { + model = "TI AM335x BeagleBone Black"; + compatible = "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; + + clk_mcasp0_fixed: clk_mcasp0_fixed { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24576000>; + }; + + clk_mcasp0: clk_mcasp0 { + #clock-cells = <0>; + compatible = "gpio-gate-clock"; + clocks = <&clk_mcasp0_fixed>; + enable-gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>; /* BeagleBone Black Clk enable on GPIO1_27 */ + }; +}; + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; + +&cpu0_opp_table { + /* + * All PG 2.0 silicon may not support 1GHz but some of the early + * BeagleBone Blacks have PG 2.0 silicon which is guaranteed + * to support 1GHz OPP so enable it for PG 2.0 on this board. + */ + oppnitro@1000000000 { + opp-supported-hw = <0x06 0x0100>; + }; +}; diff --git b/arch/arm/boot/dts/am335x-boneblack-bbb-exp-c.dts b/arch/arm/boot/dts/am335x-boneblack-bbb-exp-c.dts new file mode 100644 index 0000000..8d795c0 --- /dev/null +++ b/arch/arm/boot/dts/am335x-boneblack-bbb-exp-c.dts @@ -0,0 +1,47 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am335x-bone-common-no-capemgr.dtsi" + +/ { + model = "TI AM335x BeagleBone Black"; + compatible = "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; +}; + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; + +&mmc2 { + vmmc-supply = <&vmmcsd_fixed>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_pins>; + bus-width = <8>; + status = "okay"; +}; + +&cpu0_opp_table { + /* + * All PG 2.0 silicon may not support 1GHz but some of the early + * BeagleBone Blacks have PG 2.0 silicon which is guaranteed + * to support 1GHz OPP so enable it for PG 2.0 on this board. + */ + oppnitro@1000000000 { + opp-supported-hw = <0x06 0x0100>; + }; +}; + +#include "am335x-cape-bbb-exp-c.dtsi" diff --git b/arch/arm/boot/dts/am335x-boneblack-bbb-exp-r.dts b/arch/arm/boot/dts/am335x-boneblack-bbb-exp-r.dts new file mode 100644 index 0000000..5df881e --- /dev/null +++ b/arch/arm/boot/dts/am335x-boneblack-bbb-exp-r.dts @@ -0,0 +1,47 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am335x-bone-common-no-capemgr.dtsi" + +/ { + model = "TI AM335x BeagleBone Black"; + compatible = "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; +}; + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; + +&mmc2 { + vmmc-supply = <&vmmcsd_fixed>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_pins>; + bus-width = <8>; + status = "okay"; +}; + +&cpu0_opp_table { + /* + * All PG 2.0 silicon may not support 1GHz but some of the early + * BeagleBone Blacks have PG 2.0 silicon which is guaranteed + * to support 1GHz OPP so enable it for PG 2.0 on this board. + */ + oppnitro@1000000000 { + opp-supported-hw = <0x06 0x0100>; + }; +}; + +#include "am335x-cape-bbb-exp-r.dtsi" diff --git b/arch/arm/boot/dts/am335x-boneblack-bbbmini.dts b/arch/arm/boot/dts/am335x-boneblack-bbbmini.dts new file mode 100644 index 0000000..5ed89a2 --- /dev/null +++ b/arch/arm/boot/dts/am335x-boneblack-bbbmini.dts @@ -0,0 +1,207 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * Modified by Mirko Denecke + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am335x-bone-common.dtsi" + +#include +#include + +/ { + model = "TI AM335x BeagleBone Black"; + compatible = "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; +}; + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; + +&mmc2 { + vmmc-supply = <&vmmcsd_fixed>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_pins>; + bus-width = <8>; + status = "okay"; +}; + +&cpu0_opp_table { + /* + * All PG 2.0 silicon may not support 1GHz but some of the early + * BeagleBone Blacks have PG 2.0 silicon which is guaranteed + * to support 1GHz OPP so enable it for PG 2.0 on this board. + */ + oppnitro@1000000000 { + opp-supported-hw = <0x06 0x0100>; + }; +}; + +&am33xx_pinmux { + dcan1_pins: pinmux_dcan1_pins { + pinctrl-single,pins = < + /* P9_26: uart1_rxd.d_can1_tx */ + BONE_P9_26 (PIN_OUTPUT_PULLUP | MUX_MODE2) + /* P9_24: uart1_txd.d_can1_rx */ + BONE_P9_24 (PIN_INPUT_PULLUP | MUX_MODE2) + >; + }; + + pru_pins: pinmux_pru_pins { + pinctrl-single,pins = < + 0x03c 0x35 /* ecap0_in_pwm0_out.pr1_ecap0_ecap_capin, MODE5 | INPUT_PULLUP | PRU, PPM-sum, SBUS, DSM */ + + 0x0e8 0x25 /* lcd_pclk.pr1_pru1_pru_r30_10, MODE5 | OUTPUT | PRU, CH_1 */ + 0x0e0 0x25 /* lcd_vsync.pr1_pru1_pru_r30_8, MODE5 | OUTPUT | PRU, CH_2 */ + 0x0ec 0x25 /* lcd_ac_bias_en.pr1_pru1_pru_r30_11, MODE5 | OUTPUT | PRU, CH_3 */ + 0x0e4 0x25 /* lcd_hsync.pr1_pru1_pru_r30_9, MODE5 | OUTPUT | PRU, CH_4 */ + 0x0bc 0x25 /* lcd_data7.pr1_pru1_pru_r30_7, MODE5 | OUTPUT | PRU, CH_5 */ + 0x0b8 0x25 /* lcd_data6.pr1_pru1_pru_r30_6, MODE5 | OUTPUT | PRU, CH_6 */ + 0x0b4 0x25 /* lcd_data5.pr1_pru1_pru_r30_5, MODE5 | OUTPUT | PRU, CH_7 */ + 0x0b0 0x25 /* lcd_data4.pr1_pru1_pru_r30_4, MODE5 | OUTPUT | PRU, CH_8 */ + 0x0ac 0x25 /* lcd_data3.pr1_pru1_pru_r30_3, MODE5 | OUTPUT | PRU, CH_9 */ + 0x0a8 0x25 /* lcd_data2.pr1_pru1_pru_r30_2, MODE5 | OUTPUT | PRU, CH_10 */ + 0x0a4 0x25 /* lcd_data1.pr1_pru1_pru_r30_1, MODE5 | OUTPUT | PRU, CH_11 */ + 0x0a0 0x25 /* lcd_data0.pr1_pru1_pru_r30_0, MODE5 | OUTPUT | PRU, CH_12 */ + + BONE_P8_12 (PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* HC-SR04 TRIG */ + BONE_P8_16 (PIN_INPUT_PULLDOWN | MUX_MODE6) /* HC-SR04 ECHO */ + + BONE_P9_25 (PIN_INPUT_PULLDOWN | MUX_MODE6) /* MPU9250 INT */ + >; + }; + + spi0_pins: pinmux_spi0_pins { + pinctrl-single,pins = < + /* P9_22: spi0_sclk.spi0_sclk */ + BONE_P9_22 (PIN_INPUT_PULLUP | MUX_MODE0) + /* P9_21: spi0_d0.spi0_d0 */ + BONE_P9_21 (PIN_INPUT_PULLUP | MUX_MODE0) + /* P9_18: spi0_d1.spi0_d1 */ + BONE_P9_18 (PIN_OUTPUT_PULLUP | MUX_MODE0) + /* P9_17: spi0_cs0.spi0_cs0 */ + BONE_P9_17 (PIN_OUTPUT_PULLUP | MUX_MODE0) + >; + }; + + spi1_pins: pinmux_spi1_pins { + pinctrl-single,pins = < + /* P9_31: mcasp0_aclkx.spi1_sclk */ + BONE_P9_31 (PIN_INPUT_PULLUP | MUX_MODE3) + + /* P9_29: mcasp0_fsx.spi1_d0 */ + BONE_P9_29 (PIN_INPUT_PULLUP | MUX_MODE3) + + /* P9_30: mcasp0_axr0.spi1_d1 */ + BONE_P9_30 (PIN_OUTPUT_PULLUP | MUX_MODE3) + + /* P9_28: mcasp0_ahclkr.spi1_cs0 */ + BONE_P9_28 (PIN_OUTPUT_PULLUP | MUX_MODE3) + + /* P9_19: uart1_rtsn.spi1_cs1 */ +/* BONE_P9_19 (PIN_OUTPUT_PULLUP | MUX_MODE4)*/ + + /* P9_42: ecap0_in_pwm0_out.spi1_cs1 */ + BONE_P9_42A (PIN_OUTPUT_PULLUP | MUX_MODE2) + >; + }; + + uart4_pins: pinmux_uart4_pins { + pinctrl-single,pins = < + /* P9_11: gpmc_wait0.uart4_rxd_mux2 */ + BONE_P9_11 (PIN_INPUT_PULLUP | MUX_MODE6) + /* P9_13: gpmc_wpn.uart4_txd_mux2 */ + BONE_P9_13 (PIN_OUTPUT_PULLDOWN | MUX_MODE6) + >; + }; + + uart5_pins: pinmux_uart5_pins { + pinctrl-single,pins = < + /* P8_38: lcd_data9.uart5_rxd */ + BONE_P8_38 (PIN_INPUT_PULLUP | MUX_MODE4) + /* P8_37: lcd_data8.uart5_txd */ + BONE_P8_37 (PIN_OUTPUT_PULLDOWN | MUX_MODE4) + >; + }; +}; + +&dcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&dcan1_pins>; + status = "okay"; +}; + +&i2c2 { + clock-frequency = <400000>; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins>; + status = "okay"; + + spi0_0 { + #address-cells = <1>; + #size-cells = <0>; + spi-max-frequency = <24000000>; + reg = <0>; + compatible = "spidev"; + }; +}; + +&spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&spi1_pins>; + status = "okay"; + + spi1_0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + spi-max-frequency = <24000000>; + compatible = "spidev"; + }; + + spi1_1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + spi-max-frequency = <24000000>; + compatible = "spidev"; + }; +}; + +&tscadc { + adc { + ti,adc-channels = <0 1>; + }; +}; + +&pruss { + pinctrl-names = "default"; + pinctrl-0 = <&pru_pins>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&uart5_pins>; + status = "okay"; +}; diff --git b/arch/arm/boot/dts/am335x-boneblack-cape-bone-argus.dts b/arch/arm/boot/dts/am335x-boneblack-cape-bone-argus.dts new file mode 100644 index 0000000..c97c912 --- /dev/null +++ b/arch/arm/boot/dts/am335x-boneblack-cape-bone-argus.dts @@ -0,0 +1,105 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am335x-bone-common-no-capemgr.dtsi" + +/ { + model = "TI AM335x BeagleBone Black"; + compatible = "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; +}; + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; + +&mmc2 { + vmmc-supply = <&vmmcsd_fixed>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_pins>; + bus-width = <8>; + status = "okay"; +}; + +&cpu0_opp_table { + /* + * All PG 2.0 silicon may not support 1GHz but some of the early + * BeagleBone Blacks have PG 2.0 silicon which is guaranteed + * to support 1GHz OPP so enable it for PG 2.0 on this board. + */ + oppnitro@1000000000 { + opp-supported-hw = <0x06 0x0100>; + }; +}; + +&am33xx_pinmux { + nxp_hdmi_bonelt_pins: nxp_hdmi_bonelt_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr0 */ + AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */ + AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */ + AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */ + AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */ + AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */ + AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */ + AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */ + AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */ + AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */ + AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */ + AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */ + AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */ + AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */ + AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */ + AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */ + AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */ + AM33XX_IOPAD(0x8e0, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_vsync.lcd_vsync */ + AM33XX_IOPAD(0x8e4, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_hsync.lcd_hsync */ + AM33XX_IOPAD(0x8e8, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_pclk.lcd_pclk */ + AM33XX_IOPAD(0x8ec, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */ + >; + }; + nxp_hdmi_bonelt_off_pins: nxp_hdmi_bonelt_off_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr0 */ + >; + }; +}; + +&lcdc { + status = "okay"; + port { + lcdc_0: endpoint@0 { + remote-endpoint = <&hdmi_0>; + }; + }; +}; + +&i2c0 { + tda19988 { + compatible = "nxp,tda998x"; + reg = <0x70>; + pinctrl-names = "default", "off"; + pinctrl-0 = <&nxp_hdmi_bonelt_pins>; + pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>; + + port { + hdmi_0: endpoint@0 { + remote-endpoint = <&lcdc_0>; + }; + }; + }; +}; + +#include "am335x-bone-argus.dtsi" diff --git b/arch/arm/boot/dts/am335x-boneblack-emmc-overlay.dts b/arch/arm/boot/dts/am335x-boneblack-emmc-overlay.dts new file mode 100644 index 0000000..3859359 --- /dev/null +++ b/arch/arm/boot/dts/am335x-boneblack-emmc-overlay.dts @@ -0,0 +1,46 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am335x-bone-common.dtsi" +#include "am33xx-overlay-edma-fix.dtsi" + +/ { + model = "TI AM335x BeagleBone Black"; + compatible = "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; +}; + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; + +&mmc2 { + vmmc-supply = <&vmmcsd_fixed>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_pins>; + bus-width = <8>; + status = "okay"; +}; + +&cpu0_opp_table { + /* + * All PG 2.0 silicon may not support 1GHz but some of the early + * BeagleBone Blacks have PG 2.0 silicon which is guaranteed + * to support 1GHz OPP so enable it for PG 2.0 on this board. + */ + oppnitro@1000000000 { + opp-supported-hw = <0x06 0x0100>; + }; +}; diff --git b/arch/arm/boot/dts/am335x-boneblack-hdmi-overlay.dts b/arch/arm/boot/dts/am335x-boneblack-hdmi-overlay.dts new file mode 100644 index 0000000..4c3a477 --- /dev/null +++ b/arch/arm/boot/dts/am335x-boneblack-hdmi-overlay.dts @@ -0,0 +1,107 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am335x-bone-common.dtsi" +#include "am33xx-overlay-edma-fix.dtsi" + +/ { + model = "TI AM335x BeagleBone Black"; + compatible = "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; +}; + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; + +/* EMMC in reset */ +&gpio1 { + emmc_rst { + gpio-hog; + gpios = <20 0>; + output-high; + line-name = "EMMC ResetN"; + }; +}; + + +&cpu0_opp_table { + /* + * All PG 2.0 silicon may not support 1GHz but some of the early + * BeagleBone Blacks have PG 2.0 silicon which is guaranteed + * to support 1GHz OPP so enable it for PG 2.0 on this board. + */ + oppnitro@1000000000 { + opp-supported-hw = <0x06 0x0100>; + }; +}; + +&am33xx_pinmux { + nxp_hdmi_bonelt_pins: nxp_hdmi_bonelt_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr0 */ + AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */ + AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */ + AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */ + AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */ + AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */ + AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */ + AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */ + AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */ + AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */ + AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */ + AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */ + AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */ + AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */ + AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */ + AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */ + AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */ + AM33XX_IOPAD(0x8e0, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_vsync.lcd_vsync */ + AM33XX_IOPAD(0x8e4, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_hsync.lcd_hsync */ + AM33XX_IOPAD(0x8e8, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_pclk.lcd_pclk */ + AM33XX_IOPAD(0x8ec, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */ + >; + }; + nxp_hdmi_bonelt_off_pins: nxp_hdmi_bonelt_off_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr0 */ + >; + }; +}; + +&lcdc { + status = "okay"; + port { + lcdc_0: endpoint@0 { + remote-endpoint = <&hdmi_0>; + }; + }; +}; + +&i2c0 { + tda19988 { + compatible = "nxp,tda998x"; + reg = <0x70>; + pinctrl-names = "default", "off"; + pinctrl-0 = <&nxp_hdmi_bonelt_pins>; + pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>; + + port { + hdmi_0: endpoint@0 { + remote-endpoint = <&lcdc_0>; + }; + }; + }; +}; diff --git b/arch/arm/boot/dts/am335x-boneblack-nhdmi-overlay.dts b/arch/arm/boot/dts/am335x-boneblack-nhdmi-overlay.dts new file mode 100644 index 0000000..4c3a477 --- /dev/null +++ b/arch/arm/boot/dts/am335x-boneblack-nhdmi-overlay.dts @@ -0,0 +1,107 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am335x-bone-common.dtsi" +#include "am33xx-overlay-edma-fix.dtsi" + +/ { + model = "TI AM335x BeagleBone Black"; + compatible = "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; +}; + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; + +/* EMMC in reset */ +&gpio1 { + emmc_rst { + gpio-hog; + gpios = <20 0>; + output-high; + line-name = "EMMC ResetN"; + }; +}; + + +&cpu0_opp_table { + /* + * All PG 2.0 silicon may not support 1GHz but some of the early + * BeagleBone Blacks have PG 2.0 silicon which is guaranteed + * to support 1GHz OPP so enable it for PG 2.0 on this board. + */ + oppnitro@1000000000 { + opp-supported-hw = <0x06 0x0100>; + }; +}; + +&am33xx_pinmux { + nxp_hdmi_bonelt_pins: nxp_hdmi_bonelt_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr0 */ + AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */ + AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */ + AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */ + AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */ + AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */ + AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */ + AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */ + AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */ + AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */ + AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */ + AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */ + AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */ + AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */ + AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */ + AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */ + AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */ + AM33XX_IOPAD(0x8e0, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_vsync.lcd_vsync */ + AM33XX_IOPAD(0x8e4, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_hsync.lcd_hsync */ + AM33XX_IOPAD(0x8e8, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_pclk.lcd_pclk */ + AM33XX_IOPAD(0x8ec, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */ + >; + }; + nxp_hdmi_bonelt_off_pins: nxp_hdmi_bonelt_off_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr0 */ + >; + }; +}; + +&lcdc { + status = "okay"; + port { + lcdc_0: endpoint@0 { + remote-endpoint = <&hdmi_0>; + }; + }; +}; + +&i2c0 { + tda19988 { + compatible = "nxp,tda998x"; + reg = <0x70>; + pinctrl-names = "default", "off"; + pinctrl-0 = <&nxp_hdmi_bonelt_pins>; + pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>; + + port { + hdmi_0: endpoint@0 { + remote-endpoint = <&lcdc_0>; + }; + }; + }; +}; diff --git b/arch/arm/boot/dts/am335x-boneblack-overlay.dts b/arch/arm/boot/dts/am335x-boneblack-overlay.dts new file mode 100644 index 0000000..d8dece7 --- /dev/null +++ b/arch/arm/boot/dts/am335x-boneblack-overlay.dts @@ -0,0 +1,48 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am335x-bone-common.dtsi" +#include "am33xx-overlay-edma-fix.dtsi" + +/ { + model = "TI AM335x BeagleBone Black"; + compatible = "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; +}; + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; + +/* EMMC in reset */ +&gpio1 { + emmc_rst { + gpio-hog; + gpios = <20 0>; + output-high; + line-name = "EMMC ResetN"; + }; +}; + +&cpu0_opp_table { + /* + * All PG 2.0 silicon may not support 1GHz but some of the early + * BeagleBone Blacks have PG 2.0 silicon which is guaranteed + * to support 1GHz OPP so enable it for PG 2.0 on this board. + */ + oppnitro@1000000000 { + opp-supported-hw = <0x06 0x0100>; + }; +}; diff --git b/arch/arm/boot/dts/am335x-boneblack-wireless.dts b/arch/arm/boot/dts/am335x-boneblack-wireless.dts new file mode 100644 index 0000000..42bbbde --- /dev/null +++ b/arch/arm/boot/dts/am335x-boneblack-wireless.dts @@ -0,0 +1,127 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am335x-bone-common.dtsi" +/* #include "am33xx-overlay-edma-fix.dtsi" */ +/* #include "am335x-bone-jtag.dtsi" */ +#include "am335x-boneblack-wl1835.dtsi" + +/ { + model = "TI AM335x BeagleBone Black Wireless"; + compatible = "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; +}; + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; + +&mmc2 { + vmmc-supply = <&vmmcsd_fixed>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_pins>; + bus-width = <8>; + status = "okay"; +}; + +&mac { + status = "disabled"; +}; + +&mmc3 { + status = "okay"; +}; + +&cpu0_opp_table { + opp50@300000000 { + status = "disabled"; + }; +}; + +&am33xx_pinmux { + nxp_hdmi_bonelt_pins: nxp_hdmi_bonelt_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr0 */ + AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */ + AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */ + AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */ + AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */ + AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */ + AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */ + AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */ + AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */ + AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */ + AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */ + AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */ + AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */ + AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */ + AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */ + AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */ + AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */ + AM33XX_IOPAD(0x8e0, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_vsync.lcd_vsync */ + AM33XX_IOPAD(0x8e4, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_hsync.lcd_hsync */ + AM33XX_IOPAD(0x8e8, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_pclk.lcd_pclk */ + AM33XX_IOPAD(0x8ec, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */ + >; + }; + nxp_hdmi_bonelt_off_pins: nxp_hdmi_bonelt_off_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr0 */ + >; + }; + + mcasp0_pins: mcasp0_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x9ac, PIN_INPUT_PULLUP | MUX_MODE0) /* mcasp0_ahcklx.mcasp0_ahclkx */ + AM33XX_IOPAD(0x99c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2*/ + AM33XX_IOPAD(0x994, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mcasp0_fsx.mcasp0_fsx */ + AM33XX_IOPAD(0x990, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp0_aclkx.mcasp0_aclkx */ + AM33XX_IOPAD(0x86c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a11.GPIO1_27 */ + >; + }; +}; + +&lcdc { + status = "okay"; + + /* If you want to get 24 bit RGB and 16 BGR mode instead of + * current 16 bit RGB and 24 BGR modes, set the propety + * below to "crossed" and uncomment the video-ports -property + * in tda19988 node. + */ + blue-and-red-wiring = "straight"; + + port { + lcdc_0: endpoint@0 { + remote-endpoint = <&hdmi_0>; + }; + }; +}; + +&i2c0 { + tda19988 { + compatible = "nxp,tda998x"; + reg = <0x70>; + pinctrl-names = "default", "off"; + pinctrl-0 = <&nxp_hdmi_bonelt_pins>; + pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>; + + port { + hdmi_0: endpoint@0 { + remote-endpoint = <&lcdc_0>; + }; + }; + }; +}; diff --git b/arch/arm/boot/dts/am335x-boneblack-wl1835.dtsi b/arch/arm/boot/dts/am335x-boneblack-wl1835.dtsi new file mode 100644 index 0000000..82da276 --- /dev/null +++ b/arch/arm/boot/dts/am335x-boneblack-wl1835.dtsi @@ -0,0 +1,117 @@ + +#include + +/ { + leds { + pinctrl-names = "default"; + pinctrl-0 = <&wl18xx_pins>; + compatible = "gpio-leds"; + + wl18xx_wl_en { + label = "wl18xx_wl_en"; + gpios = <&gpio3 9 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + wl18xx_bt_en { + label = "wl18xx_bt_en"; + gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + + tibt { + compatible = "tibt"; + nshutdown_gpio = <28>; + dev_name = "/dev/ttyS3"; + flow_cntrl = <1>; + baud_rate = <3000000>; + }; + + btwilink { + compatible = "btwilink"; + }; +}; + +&am33xx_pinmux { + wl18xx_pins: pinmux_wl18xx_pins { + pinctrl-single,pins = < + 0x128 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* (K17) gmii1_txd0.gpio0[28] - BT_EN */ + 0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE7 ) /* (K18) gmii1_txclk.gpio3[9] - WL_EN */ + >; + }; + + wlbtbuf_pin: pinmux_wlbtbuf_pin { + pinctrl-single,pins = < + 0x130 ( PIN_OUTPUT_PULLUP | MUX_MODE7 ) /* (L18) gmii1_rxclk.gpio3[10] - LS_BUF_EN */ + >; + }; + + mmc3_pins: pinmux_mmc3_pins { + pinctrl-single,pins = < + 0x13c ( PIN_INPUT_PULLUP | MUX_MODE6 ) /* (L15) gmii1_rxd1.mmc2_clk */ + 0x114 ( PIN_INPUT_PULLUP | MUX_MODE6 ) /* (J16) gmii1_txen.mmc2_cmd */ + 0x118 ( PIN_INPUT_PULLUP | MUX_MODE5 ) /* (J17) gmii1_rxdv.mmc2_dat0 */ + 0x11c ( PIN_INPUT_PULLUP | MUX_MODE5 ) /* (J18) gmii1_txd3.mmc2_dat1 */ + 0x120 ( PIN_INPUT_PULLUP | MUX_MODE5 ) /* (K15) gmii1_txd2.mmc2_dat2 */ + 0x108 ( PIN_INPUT_PULLUP | MUX_MODE5 ) /* (H16) gmii1_col.mmc2_dat3 */ + >; + }; + + /* wl18xx card enable/irq GPIOs. */ + wlan_pins: pinmux_wlan_pins { + pinctrl-single,pins = < + 0x144 ( PIN_INPUT_PULLUP | MUX_MODE7 ) /* (H18) rmii1_refclk.gpio0[29] - WL_IRQ */ + >; + }; + + uart3_pins_default: pinmux_uart3_pins_default { + pinctrl-single,pins = < + 0x134 ( PIN_INPUT_PULLUP | MUX_MODE1 ) /* (L17) gmii1_rxd3.uart3_rxd */ + 0x138 ( PIN_OUTPUT_PULLDOWN | MUX_MODE1 ) /* (L16) gmii1_rxd2.uart3_txd */ + 0x148 ( PIN_INPUT | MUX_MODE3 ) /* (M17) mdio_data.uart3_ctsn */ + 0x14c ( PIN_OUTPUT_PULLDOWN | MUX_MODE3 ) /* (M18) mdio_clk.uart3_rtsn */ + >; + }; +}; + +&mmc3 { + dmas = <&edma_xbar 12 0 1 + &edma_xbar 13 0 2>; + dma-names = "tx", "rx"; + status = "okay"; + vmmc-supply = <&vmmcsd_fixed>; + bus-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_pins &wlan_pins &wlbtbuf_pin>; + ti,non-removable; + ti,needs-special-hs-handling; + //ti,dual-volt; + cap-power-off-card; + keep-power-in-suspend; + //broken-cd; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@0 { + compatible = "ti,wl1835"; + reg = <2>; + interrupt-parent = <&gpio0>; + interrupts = <29 IRQ_TYPE_LEVEL_HIGH>; + }; +}; + +&gpio3 { + ls_buf_en { + gpio-hog; + gpios = <10 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "LS_BUF_EN"; + }; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins_default>; + status = "okay"; +}; diff --git b/arch/arm/boot/dts/am335x-boneblack-wl1835mod-cape.dtsi b/arch/arm/boot/dts/am335x-boneblack-wl1835mod-cape.dtsi new file mode 100644 index 0000000..94caa22 --- /dev/null +++ b/arch/arm/boot/dts/am335x-boneblack-wl1835mod-cape.dtsi @@ -0,0 +1,128 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include + +/ { + wlan_en_reg: fixedregulator@2 { + compatible = "regulator-fixed"; + regulator-name = "wlan-en-regulator"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + /* WL_EN */ + gpio = <&gpio0 26 0>; + enable-active-high; + }; + + kim { + compatible = "kim"; + nshutdown_gpio = <44>; /* Bank1, pin12 */ + dev_name = "/dev/ttyO4"; + flow_cntrl = <1>; + baud_rate = <3000000>; + }; + + btwilink { + compatible = "btwilink"; + }; +}; + +&am33xx_pinmux { + bt_pins: pinmux_bt_pins { + pinctrl-single,pins = < + 0x30 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_ad12.gpio1_12 */ + >; + }; + + mmc2_pins: pinmux_mmc2_pins { + pinctrl-single,pins = < + 0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */ + 0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ + 0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */ + 0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */ + 0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */ + 0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */ + >; + }; + + mmc2_pins_sleep: pinmux_mmc2_pins_sleep { + pinctrl-single,pins = < + 0x80 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn1.mmc1_clk */ + 0x84 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn2.mmc1_cmd */ + 0x00 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad0.mmc1_dat0 */ + 0x04 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad1.mmc1_dat1 */ + 0x08 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad2.mmc1_dat2 */ + 0x0c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad3.mmc1_dat3 */ + >; + }; + + /* wl18xx card enable/irq GPIOs. */ + wlan_pins: pinmux_wlan_pins { + pinctrl-single,pins = < + 0x28 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad10.gpio0_26 WL_EN*/ + 0x2C (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_ad11.gpio0_27 WL_IRQ*/ + 0x7C (PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_csn0.gpio1_29 BF_EN*/ + >; + }; + + /* wl18xx card enable/irq GPIOs. */ + wlan_pins_sleep: pinmux_wlan_pins_sleep { + pinctrl-single,pins = < + 0x28 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_ad10.gpio0_26 WL_EN*/ + 0x2C (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_ad11.gpio0_27 WL_IRQ*/ + 0x7C (PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_csn0.gpio1_29 BF_EN*/ + >; + }; + + uart4_pins_default: pinmux_uart4_pins_default { + pinctrl-single,pins = < + 0xD0 (PIN_INPUT | MUX_MODE6) /* lcd_data12.uart4_cts */ + 0xD4 (PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* lcd_data13.uart4_rts */ + 0x70 (PIN_INPUT_PULLUP | MUX_MODE6) /* gpmc_wait0.uart4_rxd */ + 0x74 (PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* gpmc_wpn.uart4_txd */ + >; + }; + + uart4_pins_sleep: pinmux_uart4_pins_sleep { + pinctrl-single,pins = < + 0xD0 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_data12.uart4_cts */ + 0xD4 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_data13.uart4_rts */ + 0x70 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_wait0.uart4_rxd */ + 0x74 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_wpn.uart4_txd */ + >; + }; +}; + +&mmc2 { + status = "okay"; + vmmc-supply = <&wlan_en_reg>; + bus-width = <4>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mmc2_pins &wlan_pins>; + pinctrl-1 = <&mmc2_pins_sleep &wlan_pins_sleep>; + ti,non-removable; + ti,needs-special-hs-handling; + cap-power-off-card; + keep-power-in-suspend; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@0 { + compatible = "ti,wl1835"; + reg = <2>; + interrupt-parent = <&gpio0>; + interrupts = <27 IRQ_TYPE_LEVEL_HIGH>; + }; +}; + +&uart4 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&uart4_pins_default>; + pinctrl-1 = <&uart4_pins_sleep>; + status = "okay"; +}; diff --git b/arch/arm/boot/dts/am335x-boneblack-wl1835mod.dts b/arch/arm/boot/dts/am335x-boneblack-wl1835mod.dts new file mode 100644 index 0000000..f35b64a --- /dev/null +++ b/arch/arm/boot/dts/am335x-boneblack-wl1835mod.dts @@ -0,0 +1,49 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am335x-bone-common-no-capemgr.dtsi" + +/ { + model = "TI AM335x BeagleBone Black"; + compatible = "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; +}; + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; + +/* EMMC in reset */ +&gpio1 { + emmc_rst { + gpio-hog; + gpios = <20 0>; + output-high; + line-name = "EMMC ResetN"; + }; +}; + +&cpu0_opp_table { + /* + * All PG 2.0 silicon may not support 1GHz but some of the early + * BeagleBone Blacks have PG 2.0 silicon which is guaranteed + * to support 1GHz OPP so enable it for PG 2.0 on this board. + */ + oppnitro@1000000000 { + opp-supported-hw = <0x06 0x0100>; + }; +}; + +#include "am335x-boneblack-wl1835mod-cape.dtsi" diff --git a/arch/arm/boot/dts/am335x-boneblack.dts b/arch/arm/boot/dts/am335x-boneblack.dts index ca72167..525a25a 100644 --- a/arch/arm/boot/dts/am335x-boneblack.dts +++ b/arch/arm/boot/dts/am335x-boneblack.dts @@ -9,6 +9,8 @@ #include "am33xx.dtsi" #include "am335x-bone-common.dtsi" +/* #include "am33xx-overlay-edma-fix.dtsi" */ +/* #include "am335x-bone-jtag.dtsi" */ / { model = "TI AM335x BeagleBone Black"; @@ -101,7 +103,3 @@ }; }; }; - -&rtc { - system-power-controller; -}; diff --git b/arch/arm/boot/dts/am335x-boneblue-wl1835.dtsi b/arch/arm/boot/dts/am335x-boneblue-wl1835.dtsi new file mode 100644 index 0000000..6687bf7 --- /dev/null +++ b/arch/arm/boot/dts/am335x-boneblue-wl1835.dtsi @@ -0,0 +1,117 @@ + +#include + +/ { + leds { + pinctrl-names = "default"; + pinctrl-0 = <&wl18xx_pins>; + compatible = "gpio-leds"; + + wl18xx_wl_en { + label = "wl18xx_wl_en"; + gpios = <&gpio3 9 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + wl18xx_bt_en { + label = "wl18xx_bt_en"; + gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + + tibt { + compatible = "tibt"; + nshutdown_gpio = <28>; + dev_name = "/dev/ttyS3"; + flow_cntrl = <1>; + baud_rate = <3000000>; + }; + + btwilink { + compatible = "btwilink"; + }; +}; + +&am33xx_pinmux { + wl18xx_pins: pinmux_wl18xx_pins { + pinctrl-single,pins = < + 0x128 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* (K17) gmii1_txd0.gpio0[28] - BT_EN */ + 0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE7 ) /* (K18) gmii1_txclk.gpio3[9] - WL_EN */ + >; + }; + + wlbtbuf_pin: pinmux_wlbtbuf_pin { + pinctrl-single,pins = < + 0x130 ( PIN_OUTPUT_PULLUP | MUX_MODE7 ) /* (L18) gmii1_rxclk.gpio3[10] - LS_BUF_EN */ + >; + }; + + mmc3_pins: pinmux_mmc3_pins { + pinctrl-single,pins = < + 0x13c ( PIN_INPUT_PULLUP | MUX_MODE6 ) /* (L15) gmii1_rxd1.mmc2_clk */ + 0x114 ( PIN_INPUT_PULLUP | MUX_MODE6 ) /* (J16) gmii1_txen.mmc2_cmd */ + 0x118 ( PIN_INPUT_PULLUP | MUX_MODE5 ) /* (J17) gmii1_rxdv.mmc2_dat0 */ + 0x11c ( PIN_INPUT_PULLUP | MUX_MODE5 ) /* (J18) gmii1_txd3.mmc2_dat1 */ + 0x120 ( PIN_INPUT_PULLUP | MUX_MODE5 ) /* (K15) gmii1_txd2.mmc2_dat2 */ + 0x108 ( PIN_INPUT_PULLUP | MUX_MODE5 ) /* (H16) gmii1_col.mmc2_dat3 */ + >; + }; + + /* wl18xx card enable/irq GPIOs. */ + wlan_pins: pinmux_wlan_pins { + pinctrl-single,pins = < + 0x124 ( PIN_INPUT_PULLUP | MUX_MODE7 ) /* (K16) gmii1_txd1.gpio0[21] - WL_IRQ */ + >; + }; + + uart3_pins_default: pinmux_uart3_pins_default { + pinctrl-single,pins = < + 0x134 ( PIN_INPUT_PULLUP | MUX_MODE1 ) /* (L17) gmii1_rxd3.uart3_rxd */ + 0x138 ( PIN_OUTPUT_PULLDOWN | MUX_MODE1 ) /* (L16) gmii1_rxd2.uart3_txd */ + 0x148 ( PIN_INPUT | MUX_MODE3 ) /* (M17) mdio_data.uart3_ctsn */ + 0x14c ( PIN_OUTPUT_PULLDOWN | MUX_MODE3 ) /* (M18) mdio_clk.uart3_rtsn */ + >; + }; +}; + +&mmc3 { + dmas = <&edma_xbar 12 0 1 + &edma_xbar 13 0 2>; + dma-names = "tx", "rx"; + status = "okay"; + vmmc-supply = <&vmmcsd_fixed>; + bus-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_pins &wlan_pins &wlbtbuf_pin>; + ti,non-removable; + ti,needs-special-hs-handling; + //ti,dual-volt; + cap-power-off-card; + keep-power-in-suspend; + //broken-cd; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@0 { + compatible = "ti,wl1835"; + reg = <2>; + interrupt-parent = <&gpio0>; + interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; + }; +}; + +&gpio3 { + ls_buf_en { + gpio-hog; + gpios = <10 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "LS_BUF_EN"; + }; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins_default>; + status = "okay"; +}; diff --git b/arch/arm/boot/dts/am335x-boneblue.dts b/arch/arm/boot/dts/am335x-boneblue.dts new file mode 100644 index 0000000..0c7528f --- /dev/null +++ b/arch/arm/boot/dts/am335x-boneblue.dts @@ -0,0 +1,324 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am335x-bone-common-no-capemgr.dtsi" +#include "am335x-bone-common-universal-pins.dtsi" +/* #include "am33xx-overlay-edma-fix.dtsi" */ +/* #include "am335x-bone-jtag.dtsi" */ +#include "am335x-boneblue-wl1835.dtsi" + +#define BLUE_IO(x, y) AM33XX_IOPAD((x)*4+0x800, (y)) + +/ { + model = "TI AM335x BeagleBone Blue"; + compatible = "ti,am335x-bone-blue", "ti,am335x-bone", "ti,am33xx"; +}; + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; + +&mmc2 { + vmmc-supply = <&vmmcsd_fixed>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_pins>; + bus-width = <8>; + status = "okay"; +}; + +&mac { + status = "disabled"; +}; + +&cpu0_opp_table { + opp50@300000000 { + status = "disabled"; + }; +}; + + +/**************************************** +* Pin Muxing +****************************************/ +&am33xx_pinmux { + A15_spi_pin: pinmux_A15_spi_pin { + pinctrl-single,pins = < + BLUE_IO(108, PIN_INPUT_PULLUP | MUX_MODE4) /* spi1_cs1 */ + >; + }; + + mux_helper_pins: pins { + pinctrl-single,pins = < + /* PRU encoder input */ + 0x03c 0x36 /* P8_15,PRU0_r31_15,MODE6 */ + 0x038 0x36 /* P8_16,PRU0_r31_16,MODE6 */ + + /* PRU Servo output */ + 0x0e0 0x25 /*pru1_pru_r30_8, MODE5*/ + 0x0e8 0x25 /*pru1_pru_r30_10, MODE5 */ + 0x0e4 0x25 /*pr1_pru1_pru_r30_9, MODE5 */ + 0x0ec 0x25 /*pru1_pru_r30_11, MODE5 */ + 0x0b8 0x25 /*pru1_pru_r30_6, MODE5 */ + 0x0bc 0x25 /*pru1_pru_r30_7, MODE5 */ + 0x0b0 0x25 /*pru1_pru_r30_4, MODE5 */ + 0x0b4 0x25 /*pru1_pru_r30_5, MODE5 */ + + /* GPIO Inputs */ + 0x09c 0x37 /*P8.9 Pause BUTTON, input pullup*/ + 0x098 0x37 /*P8.10 MODE BUTTON input pullup*/ + 0x1AC 0x37 /*P9.25 MPU-9150 INTERRUPT IN*/ + + /* GPIO Outputs + 0x090 0x0F /*P8.7 - R7*/ + 0x094 0x0F /*P8.8*/ + 0x028 0x0F /*P8.14*/ + 0x02C 0x0F /*P8.17*/ + 0x08c 0x0F /*P8.18*/ + 0x07c 0x0F /*P8.26*/ + /* 0x0?? 0x0F /*P8.32 - T5 - BATT_LED3 */ + 0x0cc 0x0F /*P8.34*/ + 0x0C8 0x0F /*P8.36*/ + 0x0a8 0x0F /*P8.43*/ + 0x0ac 0x0F /*P8.44*/ + 0x0a0 0x0F /*P8.45*/ + 0x0a4 0x0F /*P8.46*/ + 0x078 0x0F /*P9.12*/ + 0x074 0x0F /*P9.13*/ + 0x040 0x0F /*P9.15*/ + 0x044 0x0F /*P9.23*/ + 0x1b4 0x0F /*P9.41*/ + >; + }; + + /****************************************/ + /* DSM2 UART4 pinmux */ + /* only pin that swaps between GPIO&UART*/ + /****************************************/ + P9_11_default_pin: pinmux_P9_11_default_pin { + pinctrl-single,pins = <0x070 0x36>; }; /* Mode 6 uart */ + P9_11_gpio_pin: pinmux_P9_11_gpio_pin { + pinctrl-single,pins = <0x070 0x2F>; }; /* Mode 7, RxActive */ + P9_11_gpio_pu_pin: pinmux_P9_11_gpio_pu_pin { + pinctrl-single,pins = <0x070 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_11_gpio_pd_pin: pinmux_P9_11_gpio_pd_pin { + pinctrl-single,pins = <0x070 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_11_uart_pin: pinmux_P9_11_uart_pin { + pinctrl-single,pins = <0x070 0x36>; }; /* Mode 6, uart */ +}; + +&ocp { + /**************************************** + * activates the pinmux helper list of pin modes + ****************************************/ + test_helper: helper { + compatible = "bone-pinmux-helper"; + pinctrl-names = "default"; + pinctrl-0 = <&mux_helper_pins>; + + status = "okay"; + }; + + /**************************************** + * configurable DSM2 pin swaps between GPIO & UART4 at runtime + ****************************************/ + P9_11_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "uart"; + + pinctrl-0 = <&P9_11_default_pin>; + pinctrl-1 = <&P9_11_gpio_pin>; + pinctrl-2 = <&P9_11_gpio_pu_pin>; + pinctrl-3 = <&P9_11_gpio_pd_pin>; + pinctrl-4 = <&P9_11_uart_pin>; + }; +}; + + +/**************************************** + PWMSS +****************************************/ +&epwmss0 { + status = "okay"; +}; + +&epwmss1 { + status = "okay"; +}; + +&epwmss2 { + status = "okay"; +}; + +&ehrpwm0 { + status = "okay"; +}; + +&ehrpwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&P8_19_pwm_pin &P8_13_pwm_pin>; + status = "okay"; +}; + +&ehrpwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&P9_14_pwm_pin &P9_16_pwm_pin>; + status = "okay"; +}; + + +//&eqep0 { +// pinctrl-names = "default"; +// pinctrl-0 = <&P9_92_qep_pin &P9_27_qep_pin>; +// +// count_mode = <0>; /* 0 - Quadrature mode, normal 90 phase offset cha & chb. 1 - Direction mode. cha input = clock, chb input = direction */ +// swap_inputs = <0>; /* Are channel A and channel B swapped? (0 - no, 1 - yes) */ +// invert_qa = <1>; /* Should we invert the channel A input? */ +// invert_qb = <1>; /* Should we invert the channel B input? I invert these because my encoder outputs drive transistors that pull down the pins */ +// invert_qi = <0>; /* Should we invert the index input? */ +// invert_qs = <0>; /* Should we invert the strobe input? */ +// +// status = "okay"; +//}; + +//&eqep1 { +// pinctrl-names = "default"; +// pinctrl-0 = <&P8_33_qep_pin &P8_35_qep_pin>; +// +// count_mode = <0>; /* 0 - Quadrature mode, normal 90 phase offset cha & chb. 1 - Direction mode. cha input = clock, chb input = direction */ +// swap_inputs = <0>; /* Are channel A and channel B swapped? (0 - no, 1 - yes) */ +// invert_qa = <1>; /* Should we invert the channel A input? */ +// invert_qb = <1>; /* Should we invert the channel B input? I invert these because my encoder outputs drive transistors that pull down the pins */ +// invert_qi = <0>; /* Should we invert the index input? */ +// invert_qs = <0>; /* Should we invert the strobe input? */ +// +// status = "okay"; +//}; + +//&eqep2 { +// pinctrl-names = "default"; +// pinctrl-0 = <&P8_12_qep_pin &P8_11_qep_pin>; +// +// count_mode = <0>; /* 0 - Quadrature mode, normal 90 phase offset cha & chb. 1 - Direction mode. cha input = clock, chb input = direction */ +// swap_inputs = <0>; /* Are channel A and channel B swapped? (0 - no, 1 - yes) */ +// invert_qa = <1>; /* Should we invert the channel A input? */ +// invert_qb = <1>; /* Should we invert the channel B input? I invert these because my encoder outputs drive transistors that pull down the pins */ +// invert_qi = <0>; /* Should we invert the index input? */ +// invert_qs = <0>; /* Should we invert the strobe input? */ +// +// status = "okay"; +//}; + + +/**************************************** + UART + + UART 1, 2, 5 are used on the cape. + The Beaglebone Blue uses others so all are enabled here. +****************************************/ + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = < + &P9_24_uart_pin /* uart1_txd */ + &P9_26_uart_pin /* uart1_rxd */ + >; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = < + &P9_21_uart_pin /* uart2_txd */ + &P9_22_uart_pin /* uart2_rxd */ + >; + status = "okay"; +}; + +&uart4 { + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = < + &P8_37_uart_pin /* uart5_txd */ + &P8_38_uart_pin /* uart5_rxd */ + >; + status = "okay"; +}; + + +/**************************************** + PRU +****************************************/ +&pruss { + status = "okay"; +}; + + +/**************************************** + I2C +****************************************/ +&i2c1 { /* i2c1 is numbered correctly */ + pinctrl-names = "default"; + pinctrl-0 = <&P9_17_i2c_pin &P9_18_i2c_pin>; + status = "okay"; + + /* this is the configuration part */ + clock-frequency = <400000>; + + #address-cells = <1>; + #size-cells = <0>; + + /* add any i2c devices on the bus here */ +}; + +&i2c2 { /* i2c2 is numbered correctly */ + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + + status = "okay"; + clock-frequency = <400000>; + + #address-cells = <1>; + #size-cells = <0>; + + /* add any i2c devices on the bus here */ +}; + +/**************************************** + SPI +****************************************/ +&spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&P9_31_spi_pin /* spi1_sclk */ + &P9_29_spi_pin /* spi1_d0 */ + &P9_30_spi_pin /* spi1_d1 */ + &P9_28_gpio_pu_pin /* gpio3_17 - cs0 */ + &A15_spi_pin /* spi1_cs1 */ + >; + + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + spidev@1 { + spi-max-frequency = <24000000>; + reg = <0>; + compatible = "linux,spidev"; + }; +}; diff --git b/arch/arm/boot/dts/am335x-bonegreen-overlay.dts b/arch/arm/boot/dts/am335x-bonegreen-overlay.dts new file mode 100644 index 0000000..da54bf3 --- /dev/null +++ b/arch/arm/boot/dts/am335x-bonegreen-overlay.dts @@ -0,0 +1,37 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am335x-bone-common.dtsi" +#include "am33xx-overlay-edma-fix.dtsi" + +/ { + model = "TI AM335x BeagleBone Green"; + compatible = "ti,am335x-bone-green", "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; +}; + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; + +/* EMMC in reset */ +&gpio1 { + emmc_rst { + gpio-hog; + gpios = <20 0>; + output-high; + line-name = "EMMC ResetN"; + }; +}; diff --git b/arch/arm/boot/dts/am335x-bonegreen-wireless-led-hack.dts b/arch/arm/boot/dts/am335x-bonegreen-wireless-led-hack.dts new file mode 100644 index 0000000..c2a62e2 --- /dev/null +++ b/arch/arm/boot/dts/am335x-bonegreen-wireless-led-hack.dts @@ -0,0 +1,47 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am335x-bone-common.dtsi" +#include "am335x-bonegreen-wl1835-led-hack.dtsi" + +/ { + model = "TI AM335x BeagleBone Green Wireless"; + compatible = "ti,am335x-bone-green", "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; +}; + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; + +&mmc2 { + vmmc-supply = <&vmmcsd_fixed>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_pins>; + bus-width = <8>; + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&mmc3 { + status = "okay"; +}; + +&mac { + status = "disabled"; +}; diff --git b/arch/arm/boot/dts/am335x-bonegreen-wireless.dts b/arch/arm/boot/dts/am335x-bonegreen-wireless.dts new file mode 100644 index 0000000..b4fabfe --- /dev/null +++ b/arch/arm/boot/dts/am335x-bonegreen-wireless.dts @@ -0,0 +1,47 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am335x-bone-common.dtsi" +#include "am335x-bonegreen-wl1835.dtsi" + +/ { + model = "TI AM335x BeagleBone Green Wireless"; + compatible = "ti,am335x-bone-green", "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; +}; + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; + +&mmc2 { + vmmc-supply = <&vmmcsd_fixed>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_pins>; + bus-width = <8>; + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&mmc3 { + status = "okay"; +}; + +&mac { + status = "disabled"; +}; diff --git b/arch/arm/boot/dts/am335x-bonegreen-wl1835-led-hack.dtsi b/arch/arm/boot/dts/am335x-bonegreen-wl1835-led-hack.dtsi new file mode 100644 index 0000000..b821598 --- /dev/null +++ b/arch/arm/boot/dts/am335x-bonegreen-wl1835-led-hack.dtsi @@ -0,0 +1,151 @@ + +#include + +/ { +// wlan_en_reg: fixedregulator@2 { +// compatible = "regulator-fixed"; +// regulator-name = "wlan-en-regulator"; +// regulator-min-microvolt = <1800000>; +// regulator-max-microvolt = <1800000>; +// +// /* WL_EN */ +// gpio = <&gpio0 26 0>; +// enable-active-high; +// }; + + leds { + pinctrl-names = "default"; + pinctrl-0 = <&wl18xx_pins>; + compatible = "gpio-leds"; + + wl18xx_wl_en { + label = "wl18xx_wl_en"; + gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + wl18xx_bt_en { + label = "wl18xx_bt_en"; + gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + + tibt { + compatible = "tibt"; + nshutdown_gpio = <60>; + dev_name = "/dev/ttyS3"; + flow_cntrl = <1>; + baud_rate = <3000000>; + }; + + btwilink { + compatible = "btwilink"; + }; +}; + +&am33xx_pinmux { + wl18xx_pins: pinmux_wl18xx_pins { + pinctrl-single,pins = < + 0x78 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_ad12.gpio1_28 BT_EN*/ + 0x28 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad10.gpio0_26 WL_EN*/ + >; + }; + + bt_pins: pinmux_bt_pins { + pinctrl-single,pins = < + 0x78 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_ad12.gpio1_28 BT_EN*/ + >; + }; + + mmc3_pins: pinmux_mmc3_pins { + pinctrl-single,pins = < + 0x8c ( PIN_INPUT_PULLUP | MUX_MODE3 ) /* gpio2_1 gpmc_clk.mmc2_clk */ + 0x88 ( PIN_INPUT_PULLUP | MUX_MODE3) /* gpio2_0 gpmc_csn3.mmc2_cmd */ + 0x30 ( PIN_INPUT_PULLUP | MUX_MODE3 ) /* gpio1_12 gpmc_ad12.mmc2_dat0 */ + 0x34 ( PIN_INPUT_PULLUP | MUX_MODE3 ) /* gpio1_13 gpmc_ad13.mmc2_dat1 */ + 0x38 ( PIN_INPUT_PULLUP | MUX_MODE3 ) /* gpio1_14 gpmc_ad14.mmc2_dat2 */ + 0x3c ( PIN_INPUT_PULLUP | MUX_MODE3 ) /* gpio1_15 gpmc_ad15.mmc2_dat3 */ + >; + }; + + mmc3_pins_sleep: pinmux_mmc3_pins_sleep { + pinctrl-single,pins = < + 0x8c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpio2_1 gpmc_clk.mmc2_clk */ + 0x88 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpio2_0 gpmc_csn3.mmc2_cmd */ + 0x30 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpio1_12 gpmc_ad12.mmc2_dat0 */ + 0x34 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpio1_13 gpmc_ad13.mmc2_dat1 */ + 0x38 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpio1_14 gpmc_ad14.mmc2_dat2 */ + 0x3c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpio1_15 gpmc_ad15.mmc2_dat3 */ + >; + }; + + /* wl18xx card enable/irq GPIOs. */ + wlan_pins: pinmux_wlan_pins { + pinctrl-single,pins = < +// 0x28 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad10.gpio0_26 WL_EN*/ + 0x2C (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_ad11.gpio0_27 WL_IRQ*/ + 0x7C (PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_csn0.gpio1_29 Cape_Buffer_EN*/ + >; + }; + + /* wl18xx card enable/irq GPIOs. */ + wlan_pins_sleep: pinmux_wlan_pins_sleep { + pinctrl-single,pins = < +// 0x28 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_ad10.gpio0_26 WL_EN*/ + 0x2C (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_ad11.gpio0_27 WL_IRQ*/ + 0x7C (PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_csn0.gpio1_29 Cape_Buffer_EN*/ + >; + }; + + uart3_pins_default: pinmux_uart3_pins_default { + pinctrl-single,pins = < + 0x134 ( PIN_INPUT_PULLUP | MUX_MODE1 ) /* (L17) gmii1_rxd3.uart3_rxd */ + 0x138 ( PIN_OUTPUT_PULLDOWN | MUX_MODE1 ) /* (L16) gmii1_rxd2.uart3_txd */ + 0x148 ( PIN_INPUT | MUX_MODE3 ) /* (M17) mdio_data.uart3_ctsn */ + 0x14c ( PIN_OUTPUT_PULLDOWN | MUX_MODE3 ) /* (M18) mdio_clk.uart3_rtsn */ + >; + }; + + uart3_pins_sleep: pinmux_uart3_pins_sleep { + pinctrl-single,pins = < + 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* (L17) gmii1_rxd3.uart3_rxd */ + 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* (L16) gmii1_rxd2.uart3_txd */ + 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* (M17) mdio_data.uart3_ctsn */ + 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* (M18) mdio_clk.uart3_rtsn */ + >; + }; +}; + +&mmc3 { + dmas = <&edma_xbar 12 0 1 + &edma_xbar 13 0 2>; + dma-names = "tx", "rx"; + status = "okay"; +// vmmc-supply = <&wlan_en_reg>; + vmmc-supply = <&vmmcsd_fixed>; + bus-width = <4>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mmc3_pins &wlan_pins>; + pinctrl-1 = <&mmc3_pins_sleep &wlan_pins_sleep>; + ti,non-removable; + ti,needs-special-hs-handling; + cap-power-off-card; + keep-power-in-suspend; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@0 { + compatible = "ti,wl1835"; + reg = <2>; + interrupt-parent = <&gpio0>; + interrupts = <27 IRQ_TYPE_LEVEL_HIGH>; + }; +}; + +&uart3 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&uart3_pins_default>; + pinctrl-1 = <&uart3_pins_sleep>; + status = "okay"; +}; diff --git b/arch/arm/boot/dts/am335x-bonegreen-wl1835.dtsi b/arch/arm/boot/dts/am335x-bonegreen-wl1835.dtsi new file mode 100644 index 0000000..edd2e70 --- /dev/null +++ b/arch/arm/boot/dts/am335x-bonegreen-wl1835.dtsi @@ -0,0 +1,145 @@ + +#include + +/ { + wlan_en_reg: fixedregulator@2 { + compatible = "regulator-fixed"; + regulator-name = "wlan-en-regulator"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + /* WL_EN */ + gpio = <&gpio0 26 0>; + enable-active-high; + }; + + leds { + pinctrl-names = "default"; + pinctrl-0 = <&wl18xx_pins>; + compatible = "gpio-leds"; + + wl18xx_bt_en { + label = "wl18xx_bt_en"; + gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + + tibt { + compatible = "tibt"; + nshutdown_gpio = <60>; + dev_name = "/dev/ttyS3"; + flow_cntrl = <1>; + baud_rate = <3000000>; + }; + + btwilink { + compatible = "btwilink"; + }; +}; + +&am33xx_pinmux { + wl18xx_pins: pinmux_wl18xx_pins { + pinctrl-single,pins = < + 0x78 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_ad12.gpio1_28 BT_EN*/ +// 0x28 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad10.gpio0_26 WL_EN*/ + >; + }; + + bt_pins: pinmux_bt_pins { + pinctrl-single,pins = < + 0x78 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_ad12.gpio1_28 BT_EN*/ + >; + }; + + mmc3_pins: pinmux_mmc3_pins { + pinctrl-single,pins = < + 0x8c ( PIN_INPUT_PULLUP | MUX_MODE3 ) /* gpio2_1 gpmc_clk.mmc2_clk */ + 0x88 ( PIN_INPUT_PULLUP | MUX_MODE3) /* gpio2_0 gpmc_csn3.mmc2_cmd */ + 0x30 ( PIN_INPUT_PULLUP | MUX_MODE3 ) /* gpio1_12 gpmc_ad12.mmc2_dat0 */ + 0x34 ( PIN_INPUT_PULLUP | MUX_MODE3 ) /* gpio1_13 gpmc_ad13.mmc2_dat1 */ + 0x38 ( PIN_INPUT_PULLUP | MUX_MODE3 ) /* gpio1_14 gpmc_ad14.mmc2_dat2 */ + 0x3c ( PIN_INPUT_PULLUP | MUX_MODE3 ) /* gpio1_15 gpmc_ad15.mmc2_dat3 */ + >; + }; + + mmc3_pins_sleep: pinmux_mmc3_pins_sleep { + pinctrl-single,pins = < + 0x8c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpio2_1 gpmc_clk.mmc2_clk */ + 0x88 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpio2_0 gpmc_csn3.mmc2_cmd */ + 0x30 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpio1_12 gpmc_ad12.mmc2_dat0 */ + 0x34 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpio1_13 gpmc_ad13.mmc2_dat1 */ + 0x38 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpio1_14 gpmc_ad14.mmc2_dat2 */ + 0x3c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpio1_15 gpmc_ad15.mmc2_dat3 */ + >; + }; + + /* wl18xx card enable/irq GPIOs. */ + wlan_pins: pinmux_wlan_pins { + pinctrl-single,pins = < + 0x28 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad10.gpio0_26 WL_EN*/ + 0x2C (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_ad11.gpio0_27 WL_IRQ*/ + 0x7C (PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_csn0.gpio1_29 Cape_Buffer_EN*/ + >; + }; + + /* wl18xx card enable/irq GPIOs. */ + wlan_pins_sleep: pinmux_wlan_pins_sleep { + pinctrl-single,pins = < + 0x28 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_ad10.gpio0_26 WL_EN*/ + 0x2C (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_ad11.gpio0_27 WL_IRQ*/ + 0x7C (PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_csn0.gpio1_29 Cape_Buffer_EN*/ + >; + }; + + uart3_pins_default: pinmux_uart3_pins_default { + pinctrl-single,pins = < + 0x134 ( PIN_INPUT_PULLUP | MUX_MODE1 ) /* (L17) gmii1_rxd3.uart3_rxd */ + 0x138 ( PIN_OUTPUT_PULLDOWN | MUX_MODE1 ) /* (L16) gmii1_rxd2.uart3_txd */ + 0x148 ( PIN_INPUT | MUX_MODE3 ) /* (M17) mdio_data.uart3_ctsn */ + 0x14c ( PIN_OUTPUT_PULLDOWN | MUX_MODE3 ) /* (M18) mdio_clk.uart3_rtsn */ + >; + }; + + uart3_pins_sleep: pinmux_uart3_pins_sleep { + pinctrl-single,pins = < + 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* (L17) gmii1_rxd3.uart3_rxd */ + 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* (L16) gmii1_rxd2.uart3_txd */ + 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* (M17) mdio_data.uart3_ctsn */ + 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* (M18) mdio_clk.uart3_rtsn */ + >; + }; +}; + +&mmc3 { + dmas = <&edma_xbar 12 0 1 + &edma_xbar 13 0 2>; + dma-names = "tx", "rx"; + status = "okay"; + vmmc-supply = <&wlan_en_reg>; +// vmmc-supply = <&vmmcsd_fixed>; + bus-width = <4>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mmc3_pins &wlan_pins>; + pinctrl-1 = <&mmc3_pins_sleep &wlan_pins_sleep>; + ti,non-removable; + ti,needs-special-hs-handling; + cap-power-off-card; + keep-power-in-suspend; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@0 { + compatible = "ti,wl1835"; + reg = <2>; + interrupt-parent = <&gpio0>; + interrupts = <27 IRQ_TYPE_LEVEL_HIGH>; + }; +}; + +&uart3 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&uart3_pins_default>; + pinctrl-1 = <&uart3_pins_sleep>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/am335x-bonegreen.dts b/arch/arm/boot/dts/am335x-bonegreen.dts index dce3c86..fe86cca 100644 --- a/arch/arm/boot/dts/am335x-bonegreen.dts +++ b/arch/arm/boot/dts/am335x-bonegreen.dts @@ -9,6 +9,8 @@ #include "am33xx.dtsi" #include "am335x-bone-common.dtsi" +/* #include "am33xx-overlay-edma-fix.dtsi" */ +/* #include "am335x-bone-jtag.dtsi" */ / { model = "TI AM335x BeagleBone Green"; @@ -32,22 +34,3 @@ bus-width = <8>; status = "okay"; }; - -&am33xx_pinmux { - uart2_pins: uart2_pins { - pinctrl-single,pins = < - AM33XX_IOPAD(0x950, PIN_INPUT | MUX_MODE1) /* spi0_sclk.uart2_rxd */ - AM33XX_IOPAD(0x954, PIN_OUTPUT | MUX_MODE1) /* spi0_d0.uart2_txd */ - >; - }; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&uart2_pins>; - status = "okay"; -}; - -&rtc { - system-power-controller; -}; diff --git b/arch/arm/boot/dts/am335x-cape-bbb-exp-c.dtsi b/arch/arm/boot/dts/am335x-cape-bbb-exp-c.dtsi new file mode 100644 index 0000000..01f9cde --- /dev/null +++ b/arch/arm/boot/dts/am335x-cape-bbb-exp-c.dtsi @@ -0,0 +1,224 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include + +#include "am335x-peripheral-can0.dtsi" +#include "am335x-bone-pinmux-can0.dtsi" + +#include "am335x-peripheral-ttyS1.dtsi" +#include "am335x-bone-pinmux-ttyS1.dtsi" + +#include "am335x-peripheral-ttyS2.dtsi" +#include "am335x-bone-pinmux-ttyS2.dtsi" + +#include "am335x-peripheral-ttyS4.dtsi" +#include "am335x-bone-pinmux-ttyS4.dtsi" + +&am33xx_pinmux { + user_leds_s1: user_leds_s1 { + pinctrl-single,pins = < + 0x98 0x7 /* gpmc_wen.gpio2_4, OUTPUT | MODE7 */ + 0x9c 0x7 /* gpmc_ben0_cle.gpio2_5, OUTPUT | MODE7 */ + >; + }; + + bb_lcd_pwm_backlight_pins: pinmux_bb_lcd_pwm_backlight_pins { + pinctrl-single,pins = < + BONE_P9_14 (PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* gpmc_a2.ehrpwm1a */ + >; + }; + + keymap3_pins: pinmux_keymap3_pins { + pinctrl-single,pins = < + 0x040 0x2f /* KEY_UP gpmc_a0.gpio1_16, INPUT | PULLDIS | MODE7 */ + 0x04c 0x2f /* KEY_DOWN gpmc_a3.gpio1_19, INPUT | PULLDIS | MODE7 */ + 0x078 0x2f /* KEY_RIGHT gpmc_ben1.gpio1_28, INPUT | PULLDIS | MODE7 */ + 0x164 0x2f /* KEY_LEFT ecap0_in_pwm0_out.gpio0_7, INPUT | PULLDIS | MODE7 */ + 0x1a4 0x2f /* KEY_ENTER mcasp0_fxr.gpio3_19, INPUT | PULLDIS | MODE7 */ + >; + }; + + edt_ft5306_ts_pins: pinmux_edt_ft5306_ts_pins { + pinctrl-single,pins = < + /* CAP_TSC gpmc_a1.gpio1_17, INPUT | MODE7 */ + BONE_P9_23 (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + i2c1_pins: pinmux_i2c1_pins { + pinctrl-single,pins = < + /* spi0_d1.i2c1_sda, SLEWCTRL_SLOW | INPUT_PULLUP | MODE2 */ + BONE_P9_18 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2) + /* spi0_cs0.i2c1_scl, SLEWCTRL_SLOW | INPUT_PULLUP | MODE2 */ + BONE_P9_17 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2) + >; + }; + + mcasp0_pins: pinmux_mcasp0_pins { + pinctrl-single,pins = < + 0x190 0x20 /* mcasp0_aclkx.mcasp0_aclkx, INPUT | MODE0 */ + 0x194 0x20 /* mcasp0_fsx.mcasp0_fsx, INPUT | MODE0 */ + 0x198 0x20 /* mcasp0_axr0.mcasp0_axr0, INPUT | MODE0 */ + 0x19c 0x22 /* mcasp0_ahclkr.mcasp0_axr2, INPUT | MODE2 */ + >; + }; +}; + +&epwmss1 { + status = "okay"; +}; + + +&ehrpwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&bb_lcd_pwm_backlight_pins>; + status = "okay"; +}; + +&i2c1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + clock-frequency = <400000>; + + edt-ft5306@38 { + status = "okay"; + compatible = "edt,edt-ft5306", "edt,edt-ft5x06"; + pinctrl-names = "default"; + pinctrl-0 = <&edt_ft5306_ts_pins>; + + reg = <0x38>; + interrupt-parent = <&gpio1>; + interrupts = <17 0>; + + touchscreen-size-x = <1024>; + touchscreen-size-y = <600>; + }; + + tlv320aic3x: tlv320aic3x@1b { + compatible = "ti,tlv320aic3x"; + reg = <0x1b>; + status = "okay"; + }; +}; + +&mcasp0 { + pinctrl-names = "default"; + pinctrl-0 = <&mcasp0_pins>; + + status = "okay"; + + op-mode = <0>; /* MCASP_IIS_MODE */ + tdm-slots = <2>; + num-serializer = <16>; + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 1 0 2 0 + 0 0 0 0 + 0 0 0 0 + 0 0 0 0 + >; + tx-num-evt = <1>; + rx-num-evt = <1>; +}; + +/ { + backlight { + status = "okay"; + compatible = "pwm-backlight"; + pwms = <&ehrpwm1 0 50000 0>; + brightness-levels = <0 51 53 56 62 75 101 152 255>; + default-brightness-level = <8>; + }; + + gpio_keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&keymap3_pins>; + + #address-cells = <1>; + #size-cells = <0>; + + button@1 { + debounce_interval = <50>; + linux,code = <105>; + label = "left"; + gpios = <&gpio0 7 0x1>; + gpio-key,wakeup; + autorepeat; + }; + button@2 { + debounce_interval = <50>; + linux,code = <106>; + label = "right"; + gpios = <&gpio1 28 0x1>; + gpio-key,wakeup; + autorepeat; + }; + button@3 { + debounce_interval = <50>; + linux,code = <103>; + label = "up"; + gpios = <&gpio1 16 0x1>; + gpio-key,wakeup; + autorepeat; + }; + button@4 { + debounce_interval = <50>; + linux,code = <108>; + label = "down"; + gpios = <&gpio1 19 0x1>; + gpio-key,wakeup; + autorepeat; + }; + button@5 { + debounce_interval = <50>; + linux,code = <28>; + label = "enter"; + gpios = <&gpio3 19 0x1>; + gpio-key,wakeup; + }; + }; + + gpio-leds-cape-lcd { + compatible = "gpio-leds"; + pinctrl-names = "default"; + + pinctrl-0 = <&user_leds_s1>; + + lcd-led0 { + label = "lcd:green:usr0"; + gpios = <&gpio2 4 0>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + + lcd-led1 { + label = "lcd:green:usr1"; + gpios = <&gpio2 5 0>; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + }; + + sound { + compatible = "ti,da830-evm-audio"; + ti,model = "DA830 EVM"; + ti,audio-codec = <&tlv320aic3x>; + ti,mcasp-controller = <&mcasp0>; + ti,codec-clock-rate = <12000000>; + ti,audio-routing = + "Headphone Jack", "HPLOUT", + "Headphone Jack", "HPROUT", + "MIC3L", "Mic Jack", + "MIC3R", "Mic Jack"; + }; +}; + +#include "am335x-peripheral-panel-1024x600-24bit.dtsi" +#include "am335x-bone-pinmux-panel-1024x600-24bit.dtsi" diff --git b/arch/arm/boot/dts/am335x-cape-bbb-exp-r.dtsi b/arch/arm/boot/dts/am335x-cape-bbb-exp-r.dtsi new file mode 100644 index 0000000..539409c --- /dev/null +++ b/arch/arm/boot/dts/am335x-cape-bbb-exp-r.dtsi @@ -0,0 +1,217 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include + +#include "am335x-peripheral-can0.dtsi" +#include "am335x-bone-pinmux-can0.dtsi" + +#include "am335x-peripheral-ttyS1.dtsi" +#include "am335x-bone-pinmux-ttyS1.dtsi" + +#include "am335x-peripheral-ttyS2.dtsi" +#include "am335x-bone-pinmux-ttyS2.dtsi" + +#include "am335x-peripheral-ttyS4.dtsi" +#include "am335x-bone-pinmux-ttyS4.dtsi" + +&am33xx_pinmux { + user_leds_s1: user_leds_s1 { + pinctrl-single,pins = < + 0x98 0x7 /* gpmc_wen.gpio2_4, OUTPUT | MODE7 */ + 0x9c 0x7 /* gpmc_ben0_cle.gpio2_5, OUTPUT | MODE7 */ + >; + }; + + bb_lcd_pwm_backlight_pins: pinmux_bb_lcd_pwm_backlight_pins { + pinctrl-single,pins = < + BONE_P9_14 (PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* gpmc_a2.ehrpwm1a */ + >; + }; + + keymap3_pins: pinmux_keymap3_pins { + pinctrl-single,pins = < + 0x040 0x2f /* KEY_UP gpmc_a0.gpio1_16, INPUT | PULLDIS | MODE7 */ + 0x04c 0x2f /* KEY_DOWN gpmc_a3.gpio1_19, INPUT | PULLDIS | MODE7 */ + 0x078 0x2f /* KEY_RIGHT gpmc_ben1.gpio1_28, INPUT | PULLDIS | MODE7 */ + 0x164 0x2f /* KEY_LEFT ecap0_in_pwm0_out.gpio0_7, INPUT | PULLDIS | MODE7 */ + 0x1a4 0x2f /* KEY_ENTER mcasp0_fxr.gpio3_19, INPUT | PULLDIS | MODE7 */ + >; + }; + + i2c1_pins: pinmux_i2c1_pins { + pinctrl-single,pins = < + /* spi0_d1.i2c1_sda, SLEWCTRL_SLOW | INPUT_PULLUP | MODE2 */ + BONE_P9_18 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2) + /* spi0_cs0.i2c1_scl, SLEWCTRL_SLOW | INPUT_PULLUP | MODE2 */ + BONE_P9_17 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2) + >; + }; + + mcasp0_pins: pinmux_mcasp0_pins { + pinctrl-single,pins = < + 0x190 0x20 /* mcasp0_aclkx.mcasp0_aclkx, INPUT | MODE0 */ + 0x194 0x20 /* mcasp0_fsx.mcasp0_fsx, INPUT | MODE0 */ + 0x198 0x20 /* mcasp0_axr0.mcasp0_axr0, INPUT | MODE0 */ + 0x19c 0x22 /* mcasp0_ahclkr.mcasp0_axr2, INPUT | MODE2 */ + >; + }; +}; + +&epwmss1 { + status = "okay"; +}; + + +&ehrpwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&bb_lcd_pwm_backlight_pins>; + status = "okay"; +}; + +&i2c1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + clock-frequency = <400000>; + + tlv320aic3x: tlv320aic3x@1b { + compatible = "ti,tlv320aic3x"; + reg = <0x1b>; + status = "okay"; + }; +}; + +&mcasp0 { + pinctrl-names = "default"; + pinctrl-0 = <&mcasp0_pins>; + + status = "okay"; + + op-mode = <0>; /* MCASP_IIS_MODE */ + tdm-slots = <2>; + num-serializer = <16>; + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 1 0 2 0 + 0 0 0 0 + 0 0 0 0 + 0 0 0 0 + >; + tx-num-evt = <1>; + rx-num-evt = <1>; +}; + +&tscadc { + status = "okay"; + tsc { + ti,wires = <4>; + ti,x-plate-resistance = <200>; + ti,coordinate-readouts = <5>; + ti,wire-config = <0x00 0x11 0x22 0x33>; + }; + + adc { + ti,adc-channels = <4 5 6 7>; + }; +}; + +/ { + backlight { + status = "okay"; + compatible = "pwm-backlight"; + pwms = <&ehrpwm1 0 50000 0>; + brightness-levels = <0 51 53 56 62 75 101 152 255>; + default-brightness-level = <8>; + }; + + gpio_keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&keymap3_pins>; + + #address-cells = <1>; + #size-cells = <0>; + + button@1 { + debounce_interval = <50>; + linux,code = <105>; + label = "left"; + gpios = <&gpio0 7 0x1>; + gpio-key,wakeup; + autorepeat; + }; + button@2 { + debounce_interval = <50>; + linux,code = <106>; + label = "right"; + gpios = <&gpio1 28 0x1>; + gpio-key,wakeup; + autorepeat; + }; + button@3 { + debounce_interval = <50>; + linux,code = <103>; + label = "up"; + gpios = <&gpio1 16 0x1>; + gpio-key,wakeup; + autorepeat; + }; + button@4 { + debounce_interval = <50>; + linux,code = <108>; + label = "down"; + gpios = <&gpio1 19 0x1>; + gpio-key,wakeup; + autorepeat; + }; + button@5 { + debounce_interval = <50>; + linux,code = <28>; + label = "enter"; + gpios = <&gpio3 19 0x1>; + gpio-key,wakeup; + }; + }; + + gpio-leds-cape-lcd { + compatible = "gpio-leds"; + pinctrl-names = "default"; + + pinctrl-0 = <&user_leds_s1>; + + lcd-led0 { + label = "lcd:green:usr0"; + gpios = <&gpio2 4 0>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + + lcd-led1 { + label = "lcd:green:usr1"; + gpios = <&gpio2 5 0>; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + }; + + sound { + compatible = "ti,da830-evm-audio"; + ti,model = "DA830 EVM"; + ti,audio-codec = <&tlv320aic3x>; + ti,mcasp-controller = <&mcasp0>; + ti,codec-clock-rate = <12000000>; + ti,audio-routing = + "Headphone Jack", "HPLOUT", + "Headphone Jack", "HPROUT", + "MIC3L", "Mic Jack", + "MIC3R", "Mic Jack"; + }; +}; + +#include "am335x-peripheral-panel-1024x600-24bit.dtsi" +#include "am335x-bone-pinmux-panel-1024x600-24bit.dtsi" diff --git b/arch/arm/boot/dts/am335x-cape-rtc-ds1307.dtsi b/arch/arm/boot/dts/am335x-cape-rtc-ds1307.dtsi new file mode 100644 index 0000000..bce6ac5 --- /dev/null +++ b/arch/arm/boot/dts/am335x-cape-rtc-ds1307.dtsi @@ -0,0 +1,31 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include + +&am33xx_pinmux { + i2c2_pins: pinmux_i2c2_pins { + pinctrl-single,pins = < + BONE_P9_20 0x73 /* (SLEWCTRL_SLOW | PIN_INPUT_PULLUP | MUX_MODE3) uart1_ctsn.i2c2_sda */ + BONE_P9_19 0x73 /* (SLEWCTRL_SLOW | PIN_INPUT_PULLUP | MUX_MODE3) uart1_rtsn.i2c2_scl */ + >; + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + + status = "okay"; + clock-frequency = <100000>; + + rtc@68 { + compatible = "maxim,ds1307"; + reg = <0x68>; + }; +}; diff --git b/arch/arm/boot/dts/am335x-olimex-som.dts b/arch/arm/boot/dts/am335x-olimex-som.dts new file mode 100644 index 0000000..2b00ad2 --- /dev/null +++ b/arch/arm/boot/dts/am335x-olimex-som.dts @@ -0,0 +1,189 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am335x-som-common.dtsi" + +/ { + model = "Olimex AM335x SOM"; + compatible = "olimex,am335x-olimex-som", "ti,am33xx"; +}; + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; + +&am33xx_pinmux { + lcd_pins_default: lcd_pins_default { + pinctrl-single,pins = < + 0x20 0x01 /* gpmc_ad8.lcd_data16, OUTPUT | MODE1 */ + 0x24 0x01 /* gpmc_ad9.lcd_data17, OUTPUT | MODE1 */ + 0x28 0x01 /* gpmc_ad10.lcd_data18, OUTPUT | MODE1 */ + 0x2c 0x01 /* gpmc_ad11.lcd_data19, OUTPUT | MODE1 */ + 0x30 0x01 /* gpmc_ad12.lcd_data20, OUTPUT | MODE1 */ + 0x34 0x01 /* gpmc_ad13.lcd_data21, OUTPUT | MODE1 */ + 0x38 0x01 /* gpmc_ad14.lcd_data22, OUTPUT | MODE1 */ + 0x3c 0x01 /* gpmc_ad15.lcd_data23, OUTPUT | MODE1 */ + 0xa0 0x00 /* lcd_data0.lcd_data0, OUTPUT | MODE0 */ + 0xa4 0x00 /* lcd_data1.lcd_data1, OUTPUT | MODE0 */ + 0xa8 0x00 /* lcd_data2.lcd_data2, OUTPUT | MODE0 */ + 0xac 0x00 /* lcd_data3.lcd_data3, OUTPUT | MODE0 */ + 0xb0 0x00 /* lcd_data4.lcd_data4, OUTPUT | MODE0 */ + 0xb4 0x00 /* lcd_data5.lcd_data5, OUTPUT | MODE0 */ + 0xb8 0x00 /* lcd_data6.lcd_data6, OUTPUT | MODE0 */ + 0xbc 0x00 /* lcd_data7.lcd_data7, OUTPUT | MODE0 */ + 0xc0 0x00 /* lcd_data8.lcd_data8, OUTPUT | MODE0 */ + 0xc4 0x00 /* lcd_data9.lcd_data9, OUTPUT | MODE0 */ + 0xc8 0x00 /* lcd_data10.lcd_data10, OUTPUT | MODE0 */ + 0xcc 0x00 /* lcd_data11.lcd_data11, OUTPUT | MODE0 */ + 0xd0 0x00 /* lcd_data12.lcd_data12, OUTPUT | MODE0 */ + 0xd4 0x00 /* lcd_data13.lcd_data13, OUTPUT | MODE0 */ + 0xd8 0x00 /* lcd_data14.lcd_data14, OUTPUT | MODE0 */ + 0xdc 0x00 /* lcd_data15.lcd_data15, OUTPUT | MODE0 */ + 0xe0 0x00 /* lcd_vsync.lcd_vsync, OUTPUT | MODE0 */ + 0xe4 0x00 /* lcd_hsync.lcd_hsync, OUTPUT | MODE0 */ + 0xe8 0x00 /* lcd_pclk.lcd_pclk, OUTPUT | MODE0 */ + 0xec 0x00 /* lcd_ac_bias_en.lcd_ac_bias_en, OUTPUT | MODE0 */ + >; + }; + + lcd_pins_sleep: lcd_pins_sleep { + pinctrl-single,pins = < + 0x20 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad8.lcd_data16 */ + 0x24 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad9.lcd_data17 */ + 0x28 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad10.lcd_data18 */ + 0x2c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad11.lcd_data19 */ + 0x30 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad12.lcd_data20 */ + 0x34 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad13.lcd_data21 */ + 0x38 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad14.lcd_data22 */ + 0x3c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad15.lcd_data23 */ + 0xa0 (PULL_DISABLE | MUX_MODE7) /* lcd_data0.lcd_data0 */ + 0xa4 (PULL_DISABLE | MUX_MODE7) /* lcd_data1.lcd_data1 */ + 0xa8 (PULL_DISABLE | MUX_MODE7) /* lcd_data2.lcd_data2 */ + 0xac (PULL_DISABLE | MUX_MODE7) /* lcd_data3.lcd_data3 */ + 0xb0 (PULL_DISABLE | MUX_MODE7) /* lcd_data4.lcd_data4 */ + 0xb4 (PULL_DISABLE | MUX_MODE7) /* lcd_data5.lcd_data5 */ + 0xb8 (PULL_DISABLE | MUX_MODE7) /* lcd_data6.lcd_data6 */ + 0xbc (PULL_DISABLE | MUX_MODE7) /* lcd_data7.lcd_data7 */ + 0xc0 (PULL_DISABLE | MUX_MODE7) /* lcd_data8.lcd_data8 */ + 0xc4 (PULL_DISABLE | MUX_MODE7) /* lcd_data9.lcd_data9 */ + 0xc8 (PULL_DISABLE | MUX_MODE7) /* lcd_data10.lcd_data10 */ + 0xcc (PULL_DISABLE | MUX_MODE7) /* lcd_data11.lcd_data11 */ + 0xd0 (PULL_DISABLE | MUX_MODE7) /* lcd_data12.lcd_data12 */ + 0xd4 (PULL_DISABLE | MUX_MODE7) /* lcd_data13.lcd_data13 */ + 0xd8 (PULL_DISABLE | MUX_MODE7) /* lcd_data14.lcd_data14 */ + 0xdc (PULL_DISABLE | MUX_MODE7) /* lcd_data15.lcd_data15 */ + /* lcd_vsync.lcd_vsync,OUTPUT | MODE0 */ + 0xe0 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0xe4 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_hsync.lcd_hsync */ + 0xe8 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_pclk.lcd_pclk */ + /* lcd_ac_bias_en.lcd_ac_bias_en */ + 0xec (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + +}; + +&lcdc { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&lcd_pins_default>; + pinctrl-1 = <&lcd_pins_sleep>; + status = "okay"; + /* display-timings { + 480x272 { + hactive = <480>; + vactive = <272>; + hback-porch = <43>; + hfront-porch = <8>; + hsync-len = <4>; + vback-porch = <12>; + vfront-porch = <4>; + vsync-len = <10>; + clock-frequency = <9000000>; + hsync-active = <0>; + vsync-active = <0>; + }; + };*/ + + display-timings { + native-mode = <&vga1024x768>; + lcd4: 480x272 { + clock-frequency = <9000000>; + hactive = <480>; + vactive = <272>; + hfront-porch = <3>; + hback-porch = <40>; + vback-porch = <8>; + vfront-porch = <7>; + hsync-len = <2>; + vsync-len = <1>; + hsync-active = <0>; + vsync-active = <0>; + }; + lcd7: 800x480 { + clock-frequency = <33300000>; + hactive = <800>; + vactive = <480>; + hfront-porch = <210>; + hback-porch = <40>; + vback-porch = <23>; + vfront-porch = <20>; + hsync-len = <6>; + vsync-len = <2>; + hsync-active = <0>; + vsync-active = <0>; + }; + lcd10: 1024x600 { + clock-frequency = <51200000>; + hactive = <1024>; + vactive = <600>; + hfront-porch = <160>; + hback-porch = <140>; + vback-porch = <20>; + vfront-porch = <12>; + hsync-len = <20>; + vsync-len = <3>; + hsync-active = <0>; + vsync-active = <0>; + }; + + vga800x600: 800x600 { + clock-frequency = <40000000>; + hactive = <800>; + vactive = <600>; + hfront-porch = <40>; + hback-porch = <88>; + vfront-porch = <1>; + vback-porch = <23>; + hsync-len = <128>; + vsync-len = <4>; + hsync-active = <0>; + vsync-active = <0>; + }; + vga1024x768: 1024x768 { + clock-frequency = <65000000>; + hactive = <1024>; + hfront-porch = <24>; + hback-porch = <160>; + hsync-len = <136>; + vactive = <768>; + vfront-porch = <3>; + vback-porch = <29>; + vsync-len = <6>; + hsync-active = <0>; + vsync-active = <0>; + }; + }; +}; diff --git b/arch/arm/boot/dts/am335x-peripheral-can0.dtsi b/arch/arm/boot/dts/am335x-peripheral-can0.dtsi new file mode 100644 index 0000000..4335e39 --- /dev/null +++ b/arch/arm/boot/dts/am335x-peripheral-can0.dtsi @@ -0,0 +1,13 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&dcan0 { + pinctrl-names = "default"; + + status = "okay"; +}; diff --git b/arch/arm/boot/dts/am335x-peripheral-can1.dtsi b/arch/arm/boot/dts/am335x-peripheral-can1.dtsi new file mode 100644 index 0000000..02b5bd1 --- /dev/null +++ b/arch/arm/boot/dts/am335x-peripheral-can1.dtsi @@ -0,0 +1,13 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&dcan1 { + pinctrl-names = "default"; + + status = "okay"; +}; diff --git b/arch/arm/boot/dts/am335x-peripheral-emmc.dtsi b/arch/arm/boot/dts/am335x-peripheral-emmc.dtsi new file mode 100644 index 0000000..603f34e --- /dev/null +++ b/arch/arm/boot/dts/am335x-peripheral-emmc.dtsi @@ -0,0 +1,15 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&mmc2 { + vmmc-supply = <&vmmcsd_fixed>; + pinctrl-names = "default"; + + bus-width = <8>; + status = "okay"; +}; diff --git b/arch/arm/boot/dts/am335x-peripheral-i2c2.dtsi b/arch/arm/boot/dts/am335x-peripheral-i2c2.dtsi new file mode 100644 index 0000000..ed9a0b5 --- /dev/null +++ b/arch/arm/boot/dts/am335x-peripheral-i2c2.dtsi @@ -0,0 +1,13 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&i2c2 { + pinctrl-names = "default"; + + status = "okay"; +}; diff --git b/arch/arm/boot/dts/am335x-peripheral-nxp-hdmi.dtsi b/arch/arm/boot/dts/am335x-peripheral-nxp-hdmi.dtsi new file mode 100644 index 0000000..1dfd26a --- /dev/null +++ b/arch/arm/boot/dts/am335x-peripheral-nxp-hdmi.dtsi @@ -0,0 +1,29 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&lcdc { + status = "okay"; + port { + lcdc_0: endpoint@0 { + remote-endpoint = <&hdmi_0>; + }; + }; +}; + +&i2c0 { + tda19988 { + compatible = "nxp,tda998x"; + reg = <0x70>; + + port { + hdmi_0: endpoint@0 { + remote-endpoint = <&lcdc_0>; + }; + }; + }; +}; diff --git b/arch/arm/boot/dts/am335x-peripheral-panel-1024x600-24bit.dtsi b/arch/arm/boot/dts/am335x-peripheral-panel-1024x600-24bit.dtsi new file mode 100644 index 0000000..74ddc12 --- /dev/null +++ b/arch/arm/boot/dts/am335x-peripheral-panel-1024x600-24bit.dtsi @@ -0,0 +1,49 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&lcdc { + status = "okay"; +}; + +/ { + panel { + status = "okay"; + compatible = "ti,tilcdc,panel"; + pinctrl-names = "default"; + + panel-info { + ac-bias = <255>; + ac-bias-intrpt = <0>; + dma-burst-sz = <16>; + bpp = <32>; + fdd = <0x80>; + sync-edge = <0>; + sync-ctrl = <0>; + raster-order = <1>; + fifo-th = <0>; + }; + display-timings { + native-mode = <&timing0>; + timing0: 1024x600 { + clock-frequency = <36000000>; + hactive = <1024>; + vactive = <600>; + hfront-porch = <1>; + hback-porch = <45>; + hsync-len = <30>; + vback-porch = <22>; + vfront-porch = <12>; + vsync-len = <2>; + hsync-active = <1>; + vsync-active = <1>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; +}; diff --git b/arch/arm/boot/dts/am335x-peripheral-spi0.dtsi b/arch/arm/boot/dts/am335x-peripheral-spi0.dtsi new file mode 100644 index 0000000..969e352 --- /dev/null +++ b/arch/arm/boot/dts/am335x-peripheral-spi0.dtsi @@ -0,0 +1,13 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&spi0 { + pinctrl-names = "default"; + + status = "okay"; +}; diff --git b/arch/arm/boot/dts/am335x-peripheral-spi1.dtsi b/arch/arm/boot/dts/am335x-peripheral-spi1.dtsi new file mode 100644 index 0000000..ac5fe97 --- /dev/null +++ b/arch/arm/boot/dts/am335x-peripheral-spi1.dtsi @@ -0,0 +1,13 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&spi1 { + pinctrl-names = "default"; + + status = "okay"; +}; diff --git b/arch/arm/boot/dts/am335x-peripheral-spi1a.dtsi b/arch/arm/boot/dts/am335x-peripheral-spi1a.dtsi new file mode 100644 index 0000000..ac5fe97 --- /dev/null +++ b/arch/arm/boot/dts/am335x-peripheral-spi1a.dtsi @@ -0,0 +1,13 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&spi1 { + pinctrl-names = "default"; + + status = "okay"; +}; diff --git b/arch/arm/boot/dts/am335x-peripheral-ttyS1.dtsi b/arch/arm/boot/dts/am335x-peripheral-ttyS1.dtsi new file mode 100644 index 0000000..f59fa4c --- /dev/null +++ b/arch/arm/boot/dts/am335x-peripheral-ttyS1.dtsi @@ -0,0 +1,13 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&uart1 { + pinctrl-names = "default"; + + status = "okay"; +}; diff --git b/arch/arm/boot/dts/am335x-peripheral-ttyS2.dtsi b/arch/arm/boot/dts/am335x-peripheral-ttyS2.dtsi new file mode 100644 index 0000000..a25d6cf --- /dev/null +++ b/arch/arm/boot/dts/am335x-peripheral-ttyS2.dtsi @@ -0,0 +1,13 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&uart2 { + pinctrl-names = "default"; + + status = "okay"; +}; diff --git b/arch/arm/boot/dts/am335x-peripheral-ttyS4.dtsi b/arch/arm/boot/dts/am335x-peripheral-ttyS4.dtsi new file mode 100644 index 0000000..adc89f0 --- /dev/null +++ b/arch/arm/boot/dts/am335x-peripheral-ttyS4.dtsi @@ -0,0 +1,13 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&uart4 { + pinctrl-names = "default"; + + status = "okay"; +}; diff --git b/arch/arm/boot/dts/am335x-peripheral-ttyS5.dtsi b/arch/arm/boot/dts/am335x-peripheral-ttyS5.dtsi new file mode 100644 index 0000000..8b42fb0 --- /dev/null +++ b/arch/arm/boot/dts/am335x-peripheral-ttyS5.dtsi @@ -0,0 +1,13 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&uart5 { + pinctrl-names = "default"; + + status = "okay"; +}; diff --git b/arch/arm/boot/dts/am335x-sancloud-bbe.dts b/arch/arm/boot/dts/am335x-sancloud-bbe.dts new file mode 100644 index 0000000..0cb95a8 --- /dev/null +++ b/arch/arm/boot/dts/am335x-sancloud-bbe.dts @@ -0,0 +1,201 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am335x-bone-common.dtsi" +#include "am33xx-overlay-edma-fix.dtsi" +#include + +/ { + model = "SanCloud BeagleBone Enhanced"; + compatible = "sancloud,am335x-boneenhanced", "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; +}; + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; + +&mmc2 { + vmmc-supply = <&vmmcsd_fixed>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_pins>; + bus-width = <8>; + status = "okay"; + ti,vcc-aux-disable-is-sleep; +}; + +&am33xx_pinmux { + pinctrl-names = "default"; + pinctrl-0 = <&usb_hub_ctrl>; + + nxp_hdmi_bonelt_pins: nxp_hdmi_bonelt_pins { + pinctrl-single,pins = < + 0x1b0 0x03 /* xdma_event_intr0, OMAP_MUX_MODE3 | AM33XX_PIN_OUTPUT */ + 0xa0 0x08 /* lcd_data0.lcd_data0, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xa4 0x08 /* lcd_data1.lcd_data1, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xa8 0x08 /* lcd_data2.lcd_data2, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xac 0x08 /* lcd_data3.lcd_data3, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xb0 0x08 /* lcd_data4.lcd_data4, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xb4 0x08 /* lcd_data5.lcd_data5, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xb8 0x08 /* lcd_data6.lcd_data6, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xbc 0x08 /* lcd_data7.lcd_data7, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xc0 0x08 /* lcd_data8.lcd_data8, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xc4 0x08 /* lcd_data9.lcd_data9, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xc8 0x08 /* lcd_data10.lcd_data10, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xcc 0x08 /* lcd_data11.lcd_data11, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xd0 0x08 /* lcd_data12.lcd_data12, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xd4 0x08 /* lcd_data13.lcd_data13, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xd8 0x08 /* lcd_data14.lcd_data14, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xdc 0x08 /* lcd_data15.lcd_data15, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xe0 0x00 /* lcd_vsync.lcd_vsync, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ + 0xe4 0x00 /* lcd_hsync.lcd_hsync, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ + 0xe8 0x00 /* lcd_pclk.lcd_pclk, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ + 0xec 0x00 /* lcd_ac_bias_en.lcd_ac_bias_en, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ + >; + }; + nxp_hdmi_bonelt_off_pins: nxp_hdmi_bonelt_off_pins { + pinctrl-single,pins = < + 0x1b0 0x03 /* xdma_event_intr0, OMAP_MUX_MODE3 | AM33XX_PIN_OUTPUT */ + >; + }; + + cpsw_default: cpsw_default { + pinctrl-single,pins = < + /* Slave 1 */ + 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_tctl */ + 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */ + 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd3.rgmii1_td3 */ + 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd2.rgmii1_td2 */ + 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */ + 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */ + 0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rgmii1_tclk */ + 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rgmii1_rclk */ + 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd3.rgmii1_rd3 */ + 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd2.rgmii1_rd2 */ + 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */ + 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */ + >; + }; + + cpsw_sleep: cpsw_sleep { + pinctrl-single,pins = < + /* Slave 1 reset value */ + 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + davinci_mdio_default: davinci_mdio_default { + pinctrl-single,pins = < + /* MDIO */ + 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ + 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + >; + }; + + davinci_mdio_sleep: davinci_mdio_sleep { + pinctrl-single,pins = < + /* MDIO reset value */ + 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + usb_hub_ctrl: usb_hub_ctrl { + pinctrl-single,pins = < + 0x144 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* mcasp0_ahclkr.gpio3_17 */ + >; + }; + + mpu6050_pins: pinmux_mpu6050_pins { + pinctrl-single,pins = < + 0x168 (PIN_INPUT | MUX_MODE7) /* spi0_sclk.gpio0_2 */ + >; + }; + + lps3331ap_pins: pinmux_lps3331ap_pins { + pinctrl-single,pins = < + 0x6C (PIN_INPUT | MUX_MODE7) /* conf_gpmc_a11.gpio1_27 */ + >; + }; +}; + +&lcdc { + status = "okay"; + port { + lcdc_0: endpoint@0 { + remote-endpoint = <&hdmi_0>; + }; + }; +}; + +&mac { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cpsw_default>; + pinctrl-1 = <&cpsw_sleep>; +}; + +&davinci_mdio { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&davinci_mdio_default>; + pinctrl-1 = <&davinci_mdio_sleep>; +}; + +&cpsw_emac0 { + phy_id = <&davinci_mdio>, <0>; + phy-mode = "rgmii-txid"; +}; + +&i2c0 { + tda19988 { + compatible = "nxp,tda998x"; + reg = <0x70>; + pinctrl-names = "default", "off"; + pinctrl-0 = <&nxp_hdmi_bonelt_pins>; + pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>; + + port { + hdmi_0: endpoint@0 { + remote-endpoint = <&lcdc_0>; + }; + }; + }; + + lps331ap: lps331ap@5C { + compatible = "st,lps331ap"; + st,drdy-int-pin = <1>; + reg = <0x5C>; + interrupt-parent = <&gpio1>; + interrupts = <27 IRQ_TYPE_EDGE_RISING>; + }; + + mpu6050: mpu6050@68 { + compatible = "invensense,mpu6050"; + reg = <0x68>; + interrupt-parent = <&gpio0>; + interrupts = <2 IRQ_TYPE_EDGE_RISING>; + //orientation = <0xff 0 0 0 1 0 0 0 0xff>; + }; +}; diff --git b/arch/arm/boot/dts/am335x-som-common.dtsi b/arch/arm/boot/dts/am335x-som-common.dtsi new file mode 100644 index 0000000..fb4399b --- /dev/null +++ b/arch/arm/boot/dts/am335x-som-common.dtsi @@ -0,0 +1,465 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/ { + + cpus { + cpu@0 { + cpu0-supply = <&dcdc2_fixed>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x20000000>; /* 512 MB */ + }; + + ocp { + uart0: serial@44e09000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + + status = "okay"; + }; + uart1: serial@48022000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + status = "okay"; + + }; + uart4: serial@481a8000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins>; + status = "okay"; + }; + + epwmss0: epwmss@48300000 { + status = "okay"; + + ecap0: ecap@48300100 { + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&ecap0_pins_default>; + pinctrl-1 = <&ecap0_pins_sleep>; + }; + }; + + musb: usb@47400000 { + status = "okay"; + + control@44e10000 { + status = "okay"; + }; + + usb-phy@47401300 { + status = "okay"; + }; + + usb-phy@47401b00 { + status = "okay"; + }; + + usb@47401000 { + status = "okay"; + dr_mode = "otg"; + }; + + usb@47401800 { + status = "okay"; + dr_mode = "host"; + }; + + dma-controller@07402000 { + status = "okay"; + }; + }; + + i2c0: i2c@44e0b000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + status = "okay"; + clock-frequency = <100000>; + + tps: tps@24 { + reg = <0x24>; + }; + }; + }; + + vmmcsd_fixed: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vmmcsd_fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + dcdc2_fixed: fixedregulator@1 { + /* VDD_MPU voltage limits 0.95V - 1.325V with +/-4% tolerance */ + compatible = "regulator-fixed"; + regulator-name = "dcdc2_fixed"; + + regulator-min-microvolt = <1378000>; + regulator-max-microvolt = <1378000>; + regulator-boot-on; + regulator-always-on; + }; + + leds { + pinctrl-names = "default"; + pinctrl-0 = <&user_leds_s0>; + + compatible = "gpio-leds"; + + led@1 { + label = "led1:green:heartbeat"; + gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + led@2 { + label = "led2:red:heartbeat"; + gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + led@3 { + label = "led3:yello:heartbeat"; + gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + led@4 { + label = "bkl"; + gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&ecap0 0 500000 1>; + brightness-levels = < + 0 1 2 3 4 5 6 7 8 9 + 10 11 12 13 14 15 16 17 18 19 + 20 21 22 23 24 25 26 27 28 29 + 30 31 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 48 49 + 50 51 52 53 54 55 56 57 58 59 + 60 61 62 63 64 65 66 67 68 69 + 70 71 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 88 89 + 90 91 92 93 94 95 96 97 98 99 + 100 + >; + default-brightness-level = <50>; + }; +}; + +&am33xx_pinmux { + pinctrl-names = "default"; + pinctrl-0 = <&clkout2_pin>; + + user_leds_s0: user_leds_s0 { + pinctrl-single,pins = < + 0x1b0 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* xdma_event_intr0.gpio0_19 */ + 0x198 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* mcasp0_axr0.gpio3_20 */ + 0x1a8 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* mcasp0_axr1.gpio3_21 */ + 0x1a4 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* mcasp0_fsr.gpio3[19], INPUT_PULLDOWN | MODE7 */ + >; + }; + + i2c0_pins: pinmux_i2c0_pins { + pinctrl-single,pins = < + 0x188 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ + 0x18c (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + >; + }; + + uart0_pins: pinmux_uart0_pins { + pinctrl-single,pins = < + 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ + 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + >; + }; + + uart1_pins: pinmux_uart1_pins { + pinctrl-single,pins = < + 0x168 (PIN_INPUT_PULLUP | MUX_MODE1) + 0x16c (PIN_OUTPUT_PULLDOWN | MUX_MODE1) + >; + }; + + uart4_pins: pinmux_uart4_pins { + pinctrl-single,pins = < + 0x180 (PIN_INPUT_PULLUP | MUX_MODE0) + 0x184 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) + >; + }; + + + + clkout2_pin: pinmux_clkout2_pin { + pinctrl-single,pins = < + 0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* xdma_event_intr1.clkout2 */ + >; + }; + + cpsw_default: cpsw_default { + pinctrl-single,pins = < + /* Slave 1 */ + 0x110 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxerr.mii1_rxerr */ + 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txen.mii1_txen */ + 0x118 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxdv.mii1_rxdv */ + 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd3.mii1_txd3 */ + 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd2.mii1_txd2 */ + 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd1.mii1_txd1 */ + 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd0.mii1_txd0 */ + 0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_txclk.mii1_txclk */ + 0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxclk.mii1_rxclk */ + 0x134 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd3.mii1_rxd3 */ + 0x138 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd2.mii1_rxd2 */ + 0x13c (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd1.mii1_rxd1 */ + 0x140 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd0.mii1_rxd0 */ + + 0x040 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* gpmc_a0.gmii2_txen, OUTPUT_PULLDOWN | MODE1 */ + 0x044 (PIN_INPUT_PULLDOWN | MUX_MODE1 ) /* gpmc_a1.gmii2_rxdv, INPUT_PULLDOWN | MODE1 */ + 0x048 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* gpmc_a2.gmii2_txd3, OUTPUT_PULLDOWN | MODE1 */ + 0x04c (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* gpmc_a3.gmii2_txd2, OUTPUT_PULLDOWN | MODE1 */ + 0x050 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* gpmc_a4.gmii2_txd1, OUTPUT_PULLDOWN | MODE1 */ + 0x054 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* gpmc_a5.gmii2_txd0, OUTPUT_PULLDOWN | MODE1 */ + 0x058 (PIN_INPUT_PULLDOWN | MUX_MODE1 ) /* gpmc_a6.gmii2_txclk, INPUT_PULLDOWN | MODE1 */ + 0x05c (PIN_INPUT_PULLDOWN | MUX_MODE1 ) /* gpmc_a7.gmii2_rxclk, INPUT_PULLDOWN | MODE1 */ + 0x060 (PIN_INPUT_PULLDOWN | MUX_MODE1 ) /* gpmc_a8.gmii2_rxd3, INPUT_PULLDOWN | MODE1 */ + 0x064 (PIN_INPUT_PULLDOWN | MUX_MODE1 ) /* gpmc_a9.gmii2_rxd2, INPUT_PULLDOWN | MODE1 */ + 0x068 (PIN_INPUT_PULLDOWN | MUX_MODE1 ) /* gpmc_a10.gmii2_rxd1, INPUT_PULLDOWN | MODE1 */ + 0x06c (PIN_INPUT_PULLDOWN | MUX_MODE1 ) /* gpmc_a11.gmii2_rxd0, INPUT_PULLDOWN | MODE1 */ + 0x070 (PIN_INPUT_PULLUP | MUX_MODE1 ) /* gpmc_wait0.gmii2_crs, INPUT_PULLUP | MODE1 */ + 0x074 (PIN_INPUT_PULLUP | MUX_MODE1 ) /* gpmc_wpn.gmii2_rxer, INPUT_PULLUP | MODE1 */ + 0x078 (PIN_INPUT_PULLUP | MUX_MODE1 ) /* gpmc_ben1.gmii2_col, INPUT_PULLUP | MODE1 */ + >; + }; + + cpsw_sleep: cpsw_sleep { + pinctrl-single,pins = < + /* Slave 1 reset value */ + 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7) + + 0x40 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x44 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x48 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x4c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x50 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x54 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x58 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x5c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x60 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x070 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x074 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x078 (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + davinci_mdio_default: davinci_mdio_default { + pinctrl-single,pins = < + /* MDIO */ + 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ + 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + >; + }; + + davinci_mdio_sleep: davinci_mdio_sleep { + pinctrl-single,pins = < + /* MDIO reset value */ + 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + mmc1_pins_default: pinmux_mmc1_pins { + pinctrl-single,pins = < + 0x0F0 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */ + 0x0F4 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */ + 0x0F8 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */ + 0x0FC (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */ + 0x100 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */ + 0x104 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */ + 0x1A0 (PIN_INPUT_PULLUP | MUX_MODE7) /* mcasp0_aclkr.gpio3_18 */ + 0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */ + >; + }; + + mmc1_pins_sleep: pinmux_mmc1_pins_sleep { + pinctrl-single,pins = < + 0x0F0 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x0F4 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x0F8 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x0FC (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x100 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x104 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x1A0 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x160 (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + emmc_pins: pinmux_emmc_pins { + pinctrl-single,pins = < + 0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */ + 0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ + 0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */ + 0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */ + 0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */ + 0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */ + 0x10 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */ + 0x14 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */ + 0x18 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */ + 0x1c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */ + >; + }; + + ecap0_pins_default: backlight_pins { + pinctrl-single,pins = < + 0x164 0x0 /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */ + >; + }; + + ecap0_pins_sleep: ecap0_pins_sleep { + pinctrl-single,pins = < + 0x164 (PULL_DISABLE | MUX_MODE7) /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out */ + >; + }; + dcan0_default: dcan0_default_pins { + pinctrl-single,pins = < + 0x178 0x0a /* uart1_ctsn.dcan0_tx_mux2, OUTPUT | MODE2 */ + 0x17c 0x2a /* uart1_rtsn.dcan0_rx_mux2, INPUT | MODE2 */ + >; + }; + }; + +&tps { + compatible = "ti,tps65217"; + regulators { + #address-cells = <1>; + #size-cells = <0>; + + dcdc1_reg: regulator@0 { + reg = <0>; + regulator-always-on; + }; + + dcdc2_reg: regulator@1 { + reg = <1>; + /* VDD_MPU voltage limits 0.95V - 1.325V with +/-4% tolerance */ + regulator-name = "vdd_mpu"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <1378000>; + regulator-boot-on; + regulator-always-on; + }; + + dcdc3_reg: regulator@2 { + reg = <2>; + /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */ + regulator-name = "vdd_core"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <1150000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1_reg: regulator@3 { + reg = <3>; + regulator-always-on; + }; + + ldo2_reg: regulator@4 { + reg = <4>; + regulator-always-on; + }; + + ldo3_reg: regulator@5 { + reg = <5>; + regulator-always-on; + }; + + ldo4_reg: regulator@6 { + reg = <6>; + regulator-always-on; + }; + }; +}; + +&cpsw_emac0 { + phy_id = <&davinci_mdio>, <0>; + phy-mode = "mii"; +}; + +&cpsw_emac1 { + phy_id = <&davinci_mdio>, <1>; + phy-mode = "mii"; +}; + +&mac { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cpsw_default>; + pinctrl-1 = <&cpsw_sleep>; + slaves = <2>; + dual_emac = <1>; + status = "okay"; +}; + +&davinci_mdio { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&davinci_mdio_default>; + pinctrl-1 = <&davinci_mdio_sleep>; + status = "okay"; +}; + +&mmc1 { + status = "okay"; + bus-width = <0x4>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mmc1_pins_default>; + pinctrl-1 = <&mmc1_pins_sleep>; + cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; + cd-inverted; +}; + +&dcan0 { + pinctrl-names = "default"; + pinctrl-0 = <&dcan0_default>; + status = "okay"; +}; + +&tscadc { + status = "okay"; + tsc { + ti,wires = <4>; + ti,x-plate-resistance = <200>; + ti,coordinate-readouts = <5>; + ti,wire-config = <0x00 0x11 0x22 0x33>; + }; + + adc { + ti,adc-channels = <0 1 2 3>; + }; +}; diff --git b/arch/arm/boot/dts/am33xx-overlay-edma-fix.dtsi b/arch/arm/boot/dts/am33xx-overlay-edma-fix.dtsi new file mode 100644 index 0000000..88c8d04 --- /dev/null +++ b/arch/arm/boot/dts/am33xx-overlay-edma-fix.dtsi @@ -0,0 +1,25 @@ +/* + * Device Tree Source for AM33xx Overlay EDMA fixes + * + * Copyright (C) 2015 Robert Nelson + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&spi0 { + status = "okay"; +}; + +&spi1 { + status = "okay"; +}; + +&mcasp0 { + status = "okay"; +}; + +&mcasp1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 5599772..5424472 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -152,7 +152,7 @@ * for the moment, just use a fake OCP bus entry to represent * the whole bus hierarchy. */ - ocp { + ocp: ocp { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -561,6 +561,17 @@ ti,timer-pwm; }; + pruss: pruss@4a300000 { + compatible = "ti,pruss-v2"; + ti,hwmods = "pruss"; + ti,deassert-hard-reset = "pruss", "pruss"; + reg = <0x4a300000 0x080000>; + ti,pintc-offset = <0x20000>; + interrupt-parent = <&intc>; + status = "disabled"; + interrupts = <20 21 22 23 24 25 26 27>; + }; + rtc: rtc@44e3e000 { compatible = "ti,am3352-rtc", "ti,da830-rtc"; reg = <0x44e3e000 0x1000>; diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index d9bfb94..08726e9 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -416,6 +416,13 @@ reg = <0x40d00000 0x100>; }; + dra7_iodelay_core: padconf@4844a000 { + compatible = "ti,dra7-iodelay"; + reg = <0x4844a000 0x0d1c>; + #address-cells = <1>; + #size-cells = <0>; + }; + sdma: dma-controller@4a056000 { compatible = "ti,omap4430-sdma"; reg = <0x4a056000 0x1000>; diff --git b/arch/arm/boot/dts/exynos5422-artik10-eval.dts b/arch/arm/boot/dts/exynos5422-artik10-eval.dts new file mode 100644 index 0000000..15a9e1b --- /dev/null +++ b/arch/arm/boot/dts/exynos5422-artik10-eval.dts @@ -0,0 +1,262 @@ +/* + * SAMSUNG ARTIK10 board device tree source + * + * Copyright (c) 2015 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/dts-v1/; + +#include +#include +#include +#include +#include "exynos5800.dtsi" +#include "exynos5422-cpus.dtsi" +/* #include "exynos5422-cpu-thermal.dtsi" */ + +/ { + model = "Samsung ARTIK10 board based on EXYNOS5422"; + compatible = "samsung,artik10", "samsung,exynos5422", "samsung,exynos5"; + + memory { + reg = <0x40000000 0x80000000>; + }; + + chosen { + linux,stdout-path = &serial_2; + }; + + firmware@02073000 { + compatible = "samsung,secure-firmware"; + reg = <0x02073000 0x1000>; + }; + + fixed-rate-clocks { + oscclk { + compatible = "samsung,exynos5420-oscclk"; + clock-frequency = <24000000>; + }; + }; + + rtc { + status = "okay"; + }; +}; + +&cpu0 { + cpu-supply = <&buck6_reg>; +}; + +&cpu4 { + cpu-supply = <&buck2_reg>; +}; + +&pinctrl_0 { + s2mps11_irq: s2mps11-irq { + samsung,pins = "gpx3-2"; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; +}; + +&hsi2c_4 { + clock-frequency = <400000>; + status = "okay"; + + s2mps11_pmic@66 { + compatible = "samsung,s2mps11-pmic"; + interrupt-parent = <&gpx3>; + interrupts = <2 IRQ_TYPE_EDGE_FALLING>; + reg = <0x66>; + + + pinctrl-names = "default"; + pinctrl-0 = <&s2mps11_irq>; + + s2mps11_osc: clocks { + #clock-cells = <1>; + clock-output-names = "s2mps11_ap", + "s2mps11_cp", "s2mps11_bt"; + }; + + regulators { + ldo4_reg: LDO4 { + regulator-name = "vdd_adc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo6_reg: LDO6 { + regulator-name = "vdd_ldo6"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo7_reg: LDO7 { + regulator-name = "vdd_ldo7"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo13_reg: LDO13 { + regulator-name = "vqmmc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + ldo17_reg: LDO17 { + regulator-name = "vdd_ldo17"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo18_reg: LDO18 { + regulator-name = "vdd_ldo18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo19_reg: LDO19 { + regulator-name = "vmmc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo20_reg: LDO20 { + regulator-name = "vdd_ldo20"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo23_reg: LDO23 { + regulator-name = "vdd_mifs"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + ldo24_reg: LDO24 { + regulator-name = "vdd_ldo24"; + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <2400000>; + }; + + ldo25_reg: LDO25 { + regulator-name = "vdd_ldo25"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo27_reg: LDO27 { + regulator-name = "vdd_g3ds"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + ldo28_reg: LDO28 { + regulator-name = "vdd_ldo28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo32_reg: LDO32 { + regulator-name = "vdd_lcd_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo38_reg: LDO38 { + regulator-name = "vdd_ldo38"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + buck1_reg: BUCK1 { + regulator-name = "vdd_mif"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + }; + + buck2_reg: BUCK2 { + regulator-name = "vdd_eagle"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + }; + + buck3_reg: BUCK3 { + regulator-name = "vdd_int"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + }; + + buck4_reg: BUCK4 { + regulator-name = "vdd_g3d"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + }; + + buck6_reg: BUCK6 { + regulator-name = "vdd_kfc"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + }; + + buck10_reg: BUCK10 { + regulator-name = "vdd_cam_isp_1.0v"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + }; + }; + }; +}; + + +&mmc_0 { + status = "okay"; + broken-cd; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <0 4>; + samsung,dw-mshc-ddr-timing = <0 2>; + samsung,dw-mshc-hs400-timing = <0 2>; + samsung,read-strobe-delay = <90>; + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 + &sd0_rclk>; + bus-width = <8>; + cap-mmc-highspeed; + keep-power-in-suspend; + non-removable; +}; + +&mmc_2 { + status = "okay"; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>; + bus-width = <4>; + cap-sd-highspeed; + vmmc-supply = <&ldo28_reg>; +}; diff --git b/arch/arm/boot/dts/imx6dl-sabresd-wl1835.dts b/arch/arm/boot/dts/imx6dl-sabresd-wl1835.dts new file mode 100644 index 0000000..37721c1 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-sabresd-wl1835.dts @@ -0,0 +1,17 @@ +/* + * Copyright (C) 2013 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; + +#include "imx6dl.dtsi" +#include "imx6qdl-sabresd-wl1835.dtsi" + +/ { + model = "Freescale i.MX6 DualLite SABRE Smart Device Board"; + compatible = "fsl,imx6dl-sabresd", "fsl,imx6dl"; +}; diff --git b/arch/arm/boot/dts/imx6q-ccimx6sbc.dts b/arch/arm/boot/dts/imx6q-ccimx6sbc.dts new file mode 100644 index 0000000..d249240 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-ccimx6sbc.dts @@ -0,0 +1,303 @@ +/* + * Copyright (C) 2015 Robert Nelson (robertcnelson@gmail.com) + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +/dts-v1/; + +#include "imx6q.dtsi" +#include + +/ { + model = "Digi ConnectCore-i.MX6 SBC Board"; + compatible = "digi,connectcore/q", "fsl,imx6q"; + + chosen { + stdout-path = &uart4; + }; + + memory { + reg = <0x10000000 0x40000000>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_usbh1_reset: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1>; + regulator-name = "usbh1_reset"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 10 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usb_otg_vbus: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii"; + phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c3>; + status = "okay"; +}; + +&i2c2 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + pmic@58 { + compatible = "dlg,da9063"; + reg = <0x58>; + interrupt-parent = <&gpio1>; + interrupts = <17 0x8>; /* active-low GPIO0_17 */ + + regulators { + vdd_3v3_reg: bperi { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo3_reg: ldo3 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo4_reg: ldo4 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo6_reg: ldo6 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo7_reg: ldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo8_reg: ldo8 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + imx6qdl-ccimx6sbc { + pinctrl_hog: hoggrp { + fsl,pins = < + /* da9063*/ + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x100b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x100b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x100b0 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x100b0 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x100b0 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x100b0 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x100b0 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x100b0 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 + /* Phy reset */ + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x000b0 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_usbh1: usbh1grp { + fsl,pins = < + /* need to force low for hub reset */ + MX6QDL_PAD_EIM_DA10__GPIO3_IO10 0x10b0 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x1b0b0 + /* power enable, high active */ + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x10b0 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + >; + }; + + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 + MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059 + MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059 + MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059 + MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059 + >; + }; + }; +}; + +&sata { + status = "okay"; +}; + +&ssi1 { + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_usbh1_reset>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1>; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + bus-width = <4>; + broken-cd; /* cd & wp, is not wired up on this board */ + status = "okay"; +}; + +&usdhc4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc4>; + bus-width = <8>; + non-removable; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6q-evi.dts b/arch/arm/boot/dts/imx6q-evi.dts index 4fa5601..49c6f61 100644 --- a/arch/arm/boot/dts/imx6q-evi.dts +++ b/arch/arm/boot/dts/imx6q-evi.dts @@ -54,18 +54,6 @@ reg = <0x10000000 0x40000000>; }; - reg_usbh1_vbus: regulator-usbhubreset { - compatible = "regulator-fixed"; - regulator-name = "usbh1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - startup-delay-us = <2>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbh1_hubreset>; - gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>; - }; - reg_usb_otg_vbus: regulator-usbotgvbus { compatible = "regulator-fixed"; regulator-name = "usb_otg_vbus"; @@ -204,12 +192,18 @@ }; &usbh1 { - vbus-supply = <®_usbh1_vbus>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbh1>; dr_mode = "host"; disable-over-current; status = "okay"; + + usb2415host: hub@1 { + compatible = "usb424,2513"; + reg = <1>; + reset-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>; + reset-duration-us = <3000>; + }; }; &usbotg { @@ -467,11 +461,6 @@ MX6QDL_PAD_GPIO_3__USB_H1_OC 0x1b0b0 /* usbh1_b OC */ MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 - >; - }; - - pinctrl_usbh1_hubreset: usbh1hubresetgrp { - fsl,pins = < MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 >; }; diff --git b/arch/arm/boot/dts/imx6q-sabresd-wl1835.dts b/arch/arm/boot/dts/imx6q-sabresd-wl1835.dts new file mode 100644 index 0000000..d88d9e2 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-sabresd-wl1835.dts @@ -0,0 +1,25 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * Copyright 2011 Linaro Ltd. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; + +#include "imx6q.dtsi" +#include "imx6qdl-sabresd-wl1835.dtsi" + +/ { + model = "Freescale i.MX6 Quad SABRE Smart Device Board"; + compatible = "fsl,imx6q-sabresd", "fsl,imx6q"; +}; + +&sata { + status = "okay"; +}; diff --git b/arch/arm/boot/dts/imx6qdl-sabresd-wl1835.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd-wl1835.dtsi new file mode 100644 index 0000000..862dfbd --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-sabresd-wl1835.dtsi @@ -0,0 +1,646 @@ +/* Copyright 2012 Freescale Semiconductor, Inc. + * Copyright 2011 Linaro Ltd. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include +#include + +/ { + chosen { + stdout-path = &uart1; + }; + + memory { + reg = <0x10000000 0x40000000>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_usb_otg_vbus: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 0>; + enable-active-high; + vin-supply = <&swbst_reg>; + }; + + reg_usb_h1_vbus: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 29 0>; + enable-active-high; + vin-supply = <&swbst_reg>; + }; + + reg_audio: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "wm8962-supply"; + gpio = <&gpio4 10 0>; + enable-active-high; + }; + + reg_pcie: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie_reg>; + regulator-name = "MPCIE_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 19 0>; + regulator-always-on; + enable-active-high; + }; + + wlan_en_reg: regulator@4 { + compatible = "regulator-fixed"; + regulator-name = "wlan-en-regulator"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + /* WLAN_EN GPIO for this board – Bank4, pin7 */ + gpio = <&gpio4 7 0>; + enable-active-high; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + + power { + label = "Power Button"; + gpios = <&gpio3 29 GPIO_ACTIVE_LOW>; + gpio-key,wakeup; + linux,code = ; + }; + + volume-up { + label = "Volume Up"; + gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; + gpio-key,wakeup; + linux,code = ; + }; + + volume-down { + label = "Volume Down"; + gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; + gpio-key,wakeup; + linux,code = ; + }; + }; + + sound { + compatible = "fsl,imx6q-sabresd-wm8962", + "fsl,imx-audio-wm8962"; + model = "wm8962-audio"; + ssi-controller = <&ssi2>; + audio-codec = <&codec>; + audio-routing = + "Headphone Jack", "HPOUTL", + "Headphone Jack", "HPOUTR", + "Ext Spk", "SPKOUTL", + "Ext Spk", "SPKOUTR", + "AMIC", "MICBIAS", + "IN3R", "AMIC"; + mux-int-port = <2>; + mux-ext-port = <3>; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <7>; + status = "okay"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + +/* red_led gpio gpio1_2 is used for bt_enable + red { + gpios = <&gpio1 2 0>; + default-state = "on"; + }; +*/ + }; + + kim { + compatible = "kim"; + nshutdown_gpio = <2>; + dev_name = "/dev/ttymxc4"; + flow_cntrl = <1>; + baud_rate = <3000000>; + }; + + btwilink { + compatible = "btwilink"; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; +}; + +/* +&ecspi1 { + fsl,spi-num-chipselects = <1>; + cs-gpios = <&gpio4 9 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + status = "okay"; + + flash: m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,m25p32"; + spi-max-frequency = <20000000>; + reg = <0>; + }; +}; +*/ + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii"; + phy-reset-gpios = <&gpio1 25 0>; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + codec: wm8962@1a { + compatible = "wlf,wm8962"; + reg = <0x1a>; + clocks = <&clks IMX6QDL_CLK_CKO>; + DCVDD-supply = <®_audio>; + DBVDD-supply = <®_audio>; + AVDD-supply = <®_audio>; + CPVDD-supply = <®_audio>; + MICVDD-supply = <®_audio>; + PLLVDD-supply = <®_audio>; + SPKVDD1-supply = <®_audio>; + SPKVDD2-supply = <®_audio>; + gpio-cfg = < + 0x0000 /* 0:Default */ + 0x0000 /* 1:Default */ + 0x0013 /* 2:FN_DMICCLK */ + 0x0000 /* 3:Default */ + 0x8014 /* 4:FN_DMICCDAT */ + 0x0000 /* 5:Default */ + >; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + pmic: pfuze100@08 { + compatible = "fsl,pfuze100"; + reg = <0x08>; + + regulators { + sw1a_reg: sw1ab { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw1c_reg: sw1c { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3a_reg: sw3a { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3b_reg: sw3b { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw4_reg: sw4 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen2_reg: vgen2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen3_reg: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + vgen4_reg: vgen4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen5_reg: vgen5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen6_reg: vgen6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + egalax_ts@04 { + compatible = "eeti,egalax_ts"; + reg = <0x04>; + interrupt-parent = <&gpio6>; + interrupts = <7 2>; + wakeup-gpios = <&gpio6 7 0>; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + imx6qdl-sabresd { + pinctrl_hog: hoggrp { + fsl,pins = < + MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0 + MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0 + MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0 + MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0 + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 + MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x1b0b0 + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0 + MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x13059 // reserve two pins wl8 gpio, this is pulled low at reset for WL_EN + MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x13059 // this is for WL_IRQ which driver will configure as an input with a pull down + >; + }; + + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL1__ECSPI1_MISO 0x100b1 + MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI 0x100b1 + MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK 0x100b1 + MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x1b0b0 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 + >; + }; + + pinctrl_gpio_keys: gpio_keysgrp { + fsl,pins = < + MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1b0b0 + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0 + MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x1b0b0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 + MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 + >; + }; + + pinctrl_pcie_reg: pciereggrp { + fsl,pins = < + MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x1b0b0 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW4__UART5_CTS_B 0x1b0b1 + MX6QDL_PAD_KEY_COL4__UART5_RTS_B 0x1b0b1 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + MX6QDL_PAD_NANDF_D4__SD2_DATA4 0x17059 + MX6QDL_PAD_NANDF_D5__SD2_DATA5 0x17059 + MX6QDL_PAD_NANDF_D6__SD2_DATA6 0x17059 + MX6QDL_PAD_NANDF_D7__SD2_DATA7 0x17059 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059 + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059 + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059 + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 + >; + }; + + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 + MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059 + MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059 + MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059 + MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059 + >; + }; + }; + + gpio_leds { + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 + >; + }; + }; +}; + +&ldb { + status = "okay"; + + lvds-channel@1 { + fsl,data-mapping = "spwg"; + fsl,data-width = <18>; + status = "okay"; + + display-timings { + native-mode = <&timing0>; + timing0: hsd100pxn1 { + clock-frequency = <65000000>; + hactive = <1024>; + vactive = <768>; + hback-porch = <220>; + hfront-porch = <40>; + vback-porch = <21>; + vfront-porch = <7>; + hsync-len = <60>; + vsync-len = <10>; + }; + }; + }; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio7 12 0>; + status = "okay"; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&snvs_poweroff { + status = "okay"; +}; + +&ssi2 { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart5 { + compatible = "fsl,imx21-uart"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "okay"; + + /* enable rts/cts usage on uart5 */ + fsl,uart-has-rtscts; +}; + +&usbh1 { + vbus-supply = <®_usb_h1_vbus>; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + bus-width = <8>; +/* cd-gpios = <&gpio2 2 0>; */ + wp-gpios = <&gpio2 3 0>; + no-1-8-v; + vmmc-supply = <&wlan_en_reg>; + non-removable; /* non-removable is not a variable, the fact it is */ + /* listed is all that is used by driver */ + cap-power-off-card; + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@0 { + compatible = "ti,wl1835"; + reg = <2>; + interrupt-parent = <&gpio4>; + interrupts = <6 IRQ_TYPE_EDGE_RISING>; + }; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + bus-width = <8>; + cd-gpios = <&gpio2 0 0>; + wp-gpios = <&gpio2 1 0>; + status = "okay"; +}; + +&usdhc4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc4>; + bus-width = <8>; + non-removable; + no-1-8-v; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6qdl-udoo.dtsi b/arch/arm/boot/dts/imx6qdl-udoo.dtsi index 3bee2f9..87fe31f 100644 --- a/arch/arm/boot/dts/imx6qdl-udoo.dtsi +++ b/arch/arm/boot/dts/imx6qdl-udoo.dtsi @@ -9,6 +9,8 @@ * */ +#include + / { aliases { backlight = &backlight; @@ -58,17 +60,6 @@ #address-cells = <1>; #size-cells = <0>; - reg_usb_h1_vbus: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "usb_h1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - startup-delay-us = <2>; /* USB2415 requires a POR of 1 us minimum */ - gpio = <&gpio7 12 0>; - }; - reg_panel: regulator@1 { compatible = "regulator-fixed"; reg = <1>; @@ -188,7 +179,7 @@ pinctrl_usbh: usbhgrp { fsl,pins = < - MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000 + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 MX6QDL_PAD_NANDF_CS2__CCM_CLKO2 0x130b0 >; }; @@ -259,9 +250,16 @@ &usbh1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbh>; - vbus-supply = <®_usb_h1_vbus>; - clocks = <&clks IMX6QDL_CLK_CKO>; status = "okay"; + + usb2415: hub@1 { + compatible = "usb424,2514"; + reg = <1>; + + clocks = <&clks IMX6QDL_CLK_CKO>; + reset-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>; + reset-duration-us = <3000>; + }; }; &usdhc3 { diff --git a/arch/arm/boot/dts/imx6qdl-wandboard-revb1.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard-revb1.dtsi index ef7fa62..b5d0f58 100644 --- a/arch/arm/boot/dts/imx6qdl-wandboard-revb1.dtsi +++ b/arch/arm/boot/dts/imx6qdl-wandboard-revb1.dtsi @@ -11,6 +11,24 @@ #include "imx6qdl-wandboard.dtsi" +/ { + rfkill { + compatible = "wand,imx6qdl-wandboard-rfkill"; + pinctrl-names = "default"; + pinctrl-0 = <>; + + bluetooth-on = <&gpio3 13 0>; + bluetooth-wake = <&gpio3 14 0>; + bluetooth-host-wake = <&gpio3 15 0>; + + wifi-ref-on = <&gpio2 29 0>; + wifi-rst-n = <&gpio5 2 0>; + wifi-reg-on = <&gpio1 26 0>; + wifi-host-wake = <&gpio1 29 0>; + wifi-wake = <&gpio1 30 0>; + }; +}; + &iomuxc { pinctrl-0 = <&pinctrl_hog>; @@ -37,6 +55,5 @@ &usdhc2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc2>; - non-removable; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-wandboard-revc1.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard-revc1.dtsi index 8d893a7..b2097ef 100644 --- a/arch/arm/boot/dts/imx6qdl-wandboard-revc1.dtsi +++ b/arch/arm/boot/dts/imx6qdl-wandboard-revc1.dtsi @@ -11,6 +11,24 @@ #include "imx6qdl-wandboard.dtsi" +/ { + rfkill { + compatible = "wand,imx6qdl-wandboard-rfkill"; + pinctrl-names = "default"; + pinctrl-0 = <>; + + bluetooth-on = <&gpio5 21 0>; + bluetooth-wake = <&gpio5 30 0>; + bluetooth-host-wake = <&gpio5 20 0>; + + wifi-ref-on = <&gpio5 31 0>; /* Wifi Power Enable */ + wifi-rst-n = <&gpio6 0 0>; /* WIFI_ON reset */ + wifi-reg-on = <&gpio1 26 0>; /* WL_REG_ON */ + wifi-host-wake = <&gpio1 29 0>; /* WL_HOST_WAKE */ + wifi-wake = <&gpio1 30 0>; /* WL_WAKE */ + }; +}; + &iomuxc { pinctrl-0 = <&pinctrl_hog>; diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index be2e747..b946245 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -935,6 +935,8 @@ usbh1: usb@02184200 { compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; + #address-cells = <1>; + #size-cells = <0>; reg = <0x02184200 0x200>; interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6QDL_CLK_USBOH3>; @@ -949,6 +951,8 @@ usbh2: usb@02184400 { compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; + #address-cells = <1>; + #size-cells = <0>; reg = <0x02184400 0x200>; interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6QDL_CLK_USBOH3>; @@ -962,6 +966,8 @@ usbh3: usb@02184600 { compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; + #address-cells = <1>; + #size-cells = <0>; reg = <0x02184600 0x200>; interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6QDL_CLK_USBOH3>; diff --git b/arch/arm/boot/dts/imx6sl-evk-wl1835.dts b/arch/arm/boot/dts/imx6sl-evk-wl1835.dts new file mode 100644 index 0000000..e5853f3 --- /dev/null +++ b/arch/arm/boot/dts/imx6sl-evk-wl1835.dts @@ -0,0 +1,633 @@ +/* + * Copyright (C) 2013 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; + +#include +#include +#include "imx6sl.dtsi" + +/ { + model = "Freescale i.MX6 SoloLite EVK Board"; + compatible = "fsl,imx6sl-evk", "fsl,imx6sl"; + + memory { + reg = <0x80000000 0x40000000>; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_led>; + + user { + label = "debug"; + gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_usb_otg1_vbus: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "usb_otg1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio4 0 0>; + enable-active-high; + vin-supply = <&swbst_reg>; + }; + + reg_usb_otg2_vbus: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "usb_otg2_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio4 2 0>; + enable-active-high; + vin-supply = <&swbst_reg>; + }; + + reg_aud3v: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "wm8962-supply-3v15"; + regulator-min-microvolt = <3150000>; + regulator-max-microvolt = <3150000>; + regulator-boot-on; + }; + + reg_aud4v: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "wm8962-supply-4v2"; + regulator-min-microvolt = <4325000>; + regulator-max-microvolt = <4325000>; + regulator-boot-on; + }; + + reg_lcd_3v3: regulator@4 { + compatible = "regulator-fixed"; + reg = <4>; + regulator-name = "lcd-3v3"; + gpio = <&gpio4 3 0>; + enable-active-high; + }; + + wlan_en_reg: regulator@5 { + compatible = "regulator-fixed"; + regulator-name = "wlan-en-regulator"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + /* WLAN_EN GPIO for this board – Bank5, pin13 */ + gpio = <&gpio5 13 0>; + enable-active-high; + }; + }; + + sound { + compatible = "fsl,imx6sl-evk-wm8962", "fsl,imx-audio-wm8962"; + model = "wm8962-audio"; + ssi-controller = <&ssi2>; + audio-codec = <&codec>; + audio-routing = + "Headphone Jack", "HPOUTL", + "Headphone Jack", "HPOUTR", + "Ext Spk", "SPKOUTL", + "Ext Spk", "SPKOUTR", + "AMIC", "MICBIAS", + "IN3R", "AMIC"; + mux-int-port = <2>; + mux-ext-port = <3>; + }; + + kim { + compatible = "kim"; + nshutdown_gpio = <134>; // GPIO5_6 The wl8 driver expects gpio to be an integer, so gpio5_6 is (5-1)*32+6=134 + dev_name = "/dev/ttymxc3"; + flow_cntrl = <1>; + baud_rate = <3000000>; + }; + + btwilink { + compatible = "btwilink"; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux3>; + status = "okay"; +}; + +&ecspi1 { + fsl,spi-num-chipselects = <1>; + cs-gpios = <&gpio4 11 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + status = "okay"; + + flash: m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,m25p32"; + spi-max-frequency = <20000000>; + reg = <0>; + }; +}; + +&fec { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pinctrl_fec>; + pinctrl-1 = <&pinctrl_fec_sleep>; + phy-mode = "rmii"; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pmic: pfuze100@08 { + compatible = "fsl,pfuze100"; + reg = <0x08>; + + regulators { + sw1a_reg: sw1ab { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw1c_reg: sw1c { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3a_reg: sw3a { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3b_reg: sw3b { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw4_reg: sw4 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + regulator-always-on; + }; + + vgen2_reg: vgen2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen3_reg: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + vgen4_reg: vgen4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen5_reg: vgen5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen6_reg: vgen6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + codec: wm8962@1a { + compatible = "wlf,wm8962"; + reg = <0x1a>; + clocks = <&clks IMX6SL_CLK_EXTERN_AUDIO>; + DCVDD-supply = <&vgen3_reg>; + DBVDD-supply = <®_aud3v>; + AVDD-supply = <&vgen3_reg>; + CPVDD-supply = <&vgen3_reg>; + MICVDD-supply = <®_aud3v>; + PLLVDD-supply = <&vgen3_reg>; + SPKVDD1-supply = <®_aud4v>; + SPKVDD2-supply = <®_aud4v>; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + imx6sl-evk { + pinctrl_hog: hoggrp { + fsl,pins = < + MX6SL_PAD_KEY_ROW7__GPIO4_IO07 0x17059 + MX6SL_PAD_KEY_COL7__GPIO4_IO06 0x17059 + MX6SL_PAD_SD2_DAT7__GPIO5_IO00 0x17059 + MX6SL_PAD_SD2_DAT6__GPIO4_IO29 0x17059 + MX6SL_PAD_REF_CLK_32K__GPIO3_IO22 0x17059 + MX6SL_PAD_KEY_COL4__GPIO4_IO00 0x80000000 + MX6SL_PAD_KEY_COL5__GPIO4_IO02 0x80000000 + MX6SL_PAD_AUD_MCLK__AUDIO_CLK_OUT 0x4130b0 + MX6SL_PAD_SD1_DAT2__GPIO5_IO13 0x13059 // reserve two pins from sd1 for wl8 gpio, this is pulled low at reset for WL_EN + MX6SL_PAD_SD1_DAT1__GPIO5_IO08 0x13059 // this is for wl_irq which driver will configure as an input with a pull down + >; + }; + + pinctrl_audmux3: audmux3grp { + fsl,pins = < + MX6SL_PAD_AUD_RXD__AUD3_RXD 0x4130b0 + MX6SL_PAD_AUD_TXC__AUD3_TXC 0x4130b0 + MX6SL_PAD_AUD_TXD__AUD3_TXD 0x4110b0 + MX6SL_PAD_AUD_TXFS__AUD3_TXFS 0x4130b0 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6SL_PAD_ECSPI1_MISO__ECSPI1_MISO 0x100b1 + MX6SL_PAD_ECSPI1_MOSI__ECSPI1_MOSI 0x100b1 + MX6SL_PAD_ECSPI1_SCLK__ECSPI1_SCLK 0x100b1 + MX6SL_PAD_ECSPI1_SS0__GPIO4_IO11 0x80000000 + >; + }; + + pinctrl_fec: fecgrp { + fsl,pins = < + MX6SL_PAD_FEC_MDC__FEC_MDC 0x1b0b0 + MX6SL_PAD_FEC_MDIO__FEC_MDIO 0x1b0b0 + MX6SL_PAD_FEC_CRS_DV__FEC_RX_DV 0x1b0b0 + MX6SL_PAD_FEC_RXD0__FEC_RX_DATA0 0x1b0b0 + MX6SL_PAD_FEC_RXD1__FEC_RX_DATA1 0x1b0b0 + MX6SL_PAD_FEC_TX_EN__FEC_TX_EN 0x1b0b0 + MX6SL_PAD_FEC_TXD0__FEC_TX_DATA0 0x1b0b0 + MX6SL_PAD_FEC_TXD1__FEC_TX_DATA1 0x1b0b0 + MX6SL_PAD_FEC_REF_CLK__FEC_REF_OUT 0x4001b0a8 + >; + }; + + pinctrl_fec_sleep: fecgrp-sleep { + fsl,pins = < + MX6SL_PAD_FEC_MDC__GPIO4_IO23 0x3080 + MX6SL_PAD_FEC_CRS_DV__GPIO4_IO25 0x3080 + MX6SL_PAD_FEC_RXD0__GPIO4_IO17 0x3080 + MX6SL_PAD_FEC_RXD1__GPIO4_IO18 0x3080 + MX6SL_PAD_FEC_TX_EN__GPIO4_IO22 0x3080 + MX6SL_PAD_FEC_TXD0__GPIO4_IO24 0x3080 + MX6SL_PAD_FEC_TXD1__GPIO4_IO16 0x3080 + MX6SL_PAD_FEC_REF_CLK__GPIO4_IO26 0x3080 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6SL_PAD_I2C1_SCL__I2C1_SCL 0x4001b8b1 + MX6SL_PAD_I2C1_SDA__I2C1_SDA 0x4001b8b1 + >; + }; + + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6SL_PAD_I2C2_SCL__I2C2_SCL 0x4001b8b1 + MX6SL_PAD_I2C2_SDA__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_kpp: kppgrp { + fsl,pins = < + MX6SL_PAD_KEY_ROW0__KEY_ROW0 0x1b010 + MX6SL_PAD_KEY_ROW1__KEY_ROW1 0x1b010 + MX6SL_PAD_KEY_ROW2__KEY_ROW2 0x1b0b0 + MX6SL_PAD_KEY_COL0__KEY_COL0 0x110b0 + MX6SL_PAD_KEY_COL1__KEY_COL1 0x110b0 + MX6SL_PAD_KEY_COL2__KEY_COL2 0x110b0 + >; + }; + + pinctrl_lcd: lcdgrp { + fsl,pins = < + MX6SL_PAD_LCD_DAT0__LCD_DATA00 0x1b0b0 + MX6SL_PAD_LCD_DAT1__LCD_DATA01 0x1b0b0 + MX6SL_PAD_LCD_DAT2__LCD_DATA02 0x1b0b0 + MX6SL_PAD_LCD_DAT3__LCD_DATA03 0x1b0b0 + MX6SL_PAD_LCD_DAT4__LCD_DATA04 0x1b0b0 + MX6SL_PAD_LCD_DAT5__LCD_DATA05 0x1b0b0 + MX6SL_PAD_LCD_DAT6__LCD_DATA06 0x1b0b0 + MX6SL_PAD_LCD_DAT7__LCD_DATA07 0x1b0b0 + MX6SL_PAD_LCD_DAT8__LCD_DATA08 0x1b0b0 + MX6SL_PAD_LCD_DAT9__LCD_DATA09 0x1b0b0 + MX6SL_PAD_LCD_DAT10__LCD_DATA10 0x1b0b0 + MX6SL_PAD_LCD_DAT11__LCD_DATA11 0x1b0b0 + MX6SL_PAD_LCD_DAT12__LCD_DATA12 0x1b0b0 + MX6SL_PAD_LCD_DAT13__LCD_DATA13 0x1b0b0 + MX6SL_PAD_LCD_DAT14__LCD_DATA14 0x1b0b0 + MX6SL_PAD_LCD_DAT15__LCD_DATA15 0x1b0b0 + MX6SL_PAD_LCD_DAT16__LCD_DATA16 0x1b0b0 + MX6SL_PAD_LCD_DAT17__LCD_DATA17 0x1b0b0 + MX6SL_PAD_LCD_DAT18__LCD_DATA18 0x1b0b0 + MX6SL_PAD_LCD_DAT19__LCD_DATA19 0x1b0b0 + MX6SL_PAD_LCD_DAT20__LCD_DATA20 0x1b0b0 + MX6SL_PAD_LCD_DAT21__LCD_DATA21 0x1b0b0 + MX6SL_PAD_LCD_DAT22__LCD_DATA22 0x1b0b0 + MX6SL_PAD_LCD_DAT23__LCD_DATA23 0x1b0b0 + MX6SL_PAD_LCD_CLK__LCD_CLK 0x1b0b0 + MX6SL_PAD_LCD_ENABLE__LCD_ENABLE 0x1b0b0 + MX6SL_PAD_LCD_HSYNC__LCD_HSYNC 0x1b0b0 + MX6SL_PAD_LCD_VSYNC__LCD_VSYNC 0x1b0b0 + >; + }; + + pinctrl_led: ledgrp { + fsl,pins = < + MX6SL_PAD_HSIC_STROBE__GPIO3_IO20 0x17059 + >; + }; + + pinctrl_pwm1: pwmgrp { + fsl,pins = < + MX6SL_PAD_PWM1__PWM1_OUT 0x110b0 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6SL_PAD_UART1_RXD__UART1_RX_DATA 0x1b0b1 + MX6SL_PAD_UART1_TXD__UART1_TX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6SL_PAD_SD1_DAT4__UART4_RX_DATA 0x13059 // used for HOST_HCI_RX + MX6SL_PAD_SD1_DAT5__UART4_TX_DATA 0x13059 // used for HOST_HCI_TX + MX6SL_PAD_SD1_DAT7__UART4_CTS_B 0x13059 // used for HOST_HCI_RTS, note reversed to TI nomenclature + MX6SL_PAD_SD1_DAT6__UART4_RTS_B 0x13059 // used for HOST_HCI_CTS + MX6SL_PAD_SD1_DAT3__GPIO5_IO06 0x13059 // used for BT_EN + >; + }; + + pinctrl_usbotg1: usbotg1grp { + fsl,pins = < + MX6SL_PAD_EPDC_PWRCOM__USB_OTG1_ID 0x17059 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6SL_PAD_SD1_CMD__SD1_CMD 0x17059 + MX6SL_PAD_SD1_CLK__SD1_CLK 0x10059 + MX6SL_PAD_SD1_DAT0__SD1_DATA0 0x17059 + MX6SL_PAD_SD1_DAT1__SD1_DATA1 0x17059 + MX6SL_PAD_SD1_DAT2__SD1_DATA2 0x17059 + MX6SL_PAD_SD1_DAT3__SD1_DATA3 0x17059 + MX6SL_PAD_SD1_DAT4__SD1_DATA4 0x17059 + MX6SL_PAD_SD1_DAT5__SD1_DATA5 0x17059 + MX6SL_PAD_SD1_DAT6__SD1_DATA6 0x17059 + MX6SL_PAD_SD1_DAT7__SD1_DATA7 0x17059 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6SL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6SL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2grp100mhz { + fsl,pins = < + MX6SL_PAD_SD2_CMD__SD2_CMD 0x170b9 + MX6SL_PAD_SD2_CLK__SD2_CLK 0x100b9 + MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x170b9 + MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x170b9 + MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x170b9 + MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x170b9 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2grp200mhz { + fsl,pins = < + MX6SL_PAD_SD2_CMD__SD2_CMD 0x170f9 + MX6SL_PAD_SD2_CLK__SD2_CLK 0x100f9 + MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x170f9 + MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x170f9 + MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x170f9 + MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x170f9 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6SL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6SL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + >; + }; + }; +}; + +&kpp { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_kpp>; + linux,keymap = < + MATRIX_KEY(0x0, 0x0, KEY_UP) /* ROW0, COL0 */ + MATRIX_KEY(0x0, 0x1, KEY_DOWN) /* ROW0, COL1 */ + MATRIX_KEY(0x0, 0x2, KEY_ENTER) /* ROW0, COL2 */ + MATRIX_KEY(0x1, 0x0, KEY_HOME) /* ROW1, COL0 */ + MATRIX_KEY(0x1, 0x1, KEY_RIGHT) /* ROW1, COL1 */ + MATRIX_KEY(0x1, 0x2, KEY_LEFT) /* ROW1, COL2 */ + MATRIX_KEY(0x2, 0x0, KEY_VOLUMEDOWN) /* ROW2, COL0 */ + MATRIX_KEY(0x2, 0x1, KEY_VOLUMEUP) /* ROW2, COL1 */ + >; + status = "okay"; +}; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd>; + lcd-supply = <®_lcd_3v3>; + display = <&display0>; + status = "okay"; + + display0: display0 { + bits-per-pixel = <32>; + bus-width = <24>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <33500000>; + hactive = <800>; + vactive = <480>; + hback-porch = <89>; + hfront-porch = <164>; + vback-porch = <23>; + vfront-porch = <10>; + hsync-len = <10>; + vsync-len = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; +}; + +&pwm1 { + pinctrl-names =