*motion.txt*    For Vim version 7.0aa.  Last change: 2005 Dec 12


		  VIM REFERENCE MANUAL    by Bram Moolenaar


Cursor motions					*cursor-motions* *navigation*

These commands move the cursor position.  If the new position is off of the
screen, the screen is scrolled to show the cursor (see also 'scrolljump' and
'scrolloff' options).

1. Motions and operators	|operator|
2. Left-right motions		|left-right-motions|
3. Up-down motions		|up-down-motions|
4. Word motions			|word-motions|
5. Text object motions		|object-motions|
6. Text object selection	|object-select|
7. Marks			|mark-motions|
8. Jumps			|jump-motions|
9. Various motions		|various-motions|

General remarks:

If you want to know where you are in the file use the "CTRL-G" command
|CTRL-G| or the "g CTRL-G" command |g_CTRL-G|.  If you set the 'ruler' option,
the cursor position is continuously shown in the status line (which slows down
Vim a little).

Experienced users prefer the hjkl keys because they are always right under
their fingers.  Beginners often prefer the arrow keys, because they do not
know what the hjkl keys do.  The mnemonic value of hjkl is clear from looking
at the keyboard.  Think of j as an arrow pointing downwards.

The 'virtualedit' option can be set to make it possible to move the cursor to
positions where there is no character or halfway a character.

==============================================================================
1. Motions and operators				*operator*

The motion commands can be used after an operator command, to have the command
operate on the text that was moved over.  That is the text between the cursor
position before and after the motion.  Operators are generally used to delete
or change text.  The following operators are available:

	|c|	c	change
	|d|	d	delete
	|y|	y	yank into register (does not change the text)
	|~|	~	swap case (only if 'tildeop' is set)
	|g~|	g~	swap case
	|gu|	gu	make lowercase
	|gU|	gU	make uppercase
	|!|	!	filter through an external program
	|=|	=	filter through 'equalprg' or C-indenting if empty
	|gq|	gq	text formatting
	|g?|	g?	ROT13 encoding
	|>|	>	shift right
	|<|	<	shift left
	|zf|	zf	define a fold
	|g@|    g@      call function set with the 'operatorfunc' option

If the motion includes a count and the operator also had a count before it,
the two counts are multiplied.  For example: "2d3w" deletes six words.

After applying the operator the cursor is mostly left at the start of the text
that was operated upon.  For example, "yfe" doesn't move the cursor, but "yFe"
moves the cursor leftwards to the "e" where the yank started.

						*linewise* *characterwise*
The operator either affects whole lines, or the characters between the start
and end position.  Generally, motions that move between lines affect lines
(are linewise), and motions that move within a line affect characters (are
characterwise).  However, there are some exceptions.

						*exclusive* *inclusive*
A character motion is either inclusive or exclusive.  When inclusive, the
start and end position of the motion are included in the operation.  When
exclusive, the last character towards the end of the buffer is not included.
Linewise motions always include the start and end position.

Which motions are linewise, inclusive or exclusive is mentioned with the
command.  There are however, two general exceptions:
1. If the motion is exclusive and the end of the motion is in column 1, the
   end of the motion is moved to the end of the previous line and the motion
   becomes inclusive.  Example: "}" moves to the first line after a paragraph,
   but "d}" will not include that line.
						*exclusive-linewise*
2. If the motion is exclusive, the end of the motion is in column 1 and the
   start of the motion was at or before the first non-blank in the line, the
   motion becomes linewise.  Example: If a paragraph begins with some blanks
   and you do "d}" while standing on the first non-blank, all the lines of
   the paragraph are deleted, including the blanks.  If you do a put now, the
   deleted lines will be inserted below the cursor position.

Note that when the operator is pending (the operator command is typed, but the
motion isn't yet), a special set of mappings can be used.  See |:omap|.

Instead of first giving the operator and then a motion you can use Visual
mode: mark the start of the text with "v", move the cursor to the end of the
text that is to be affected and then hit the operator.  The text between the
start and the cursor position is highlighted, so you can see what text will
be operated upon.  This allows much more freedom, but requires more key
strokes and has limited redo functionality.  See the chapter on Visual mode
|Visual-mode|.

You can use a ":" command for a motion.  For example "d:call FindEnd()".
But this can't be redone with "." if the command is more than one line.
This can be repeated: >
	d:call search("f")<CR>
This cannot be repeated: >
	d:if 1<CR>
	   call search("f")<CR>
	endif<CR>


FORCING A MOTION TO BE LINEWISE, CHARACTERWISE OR BLOCKWISE

When a motion is not of the type you would like to use, you can force another
type by using "v", "V" or CTRL-V just after the operator.
Example: >
	dj
deletes two lines >
	dvj
deletes from the cursor position until the character below the cursor >
	d<C-V>j
deletes the character under the cursor and the character below the cursor. >

Be careful with forcing a linewise movement to be used characterwise or
blockwise, the column may not always be defined.

							*o_v*
v		When used after an operator, before the motion command: Force
		the operator to work characterwise, also when the motion is
		linewise.  If the motion was linewise, it will become
		|exclusive|.
		If the motion already was characterwise, toggle
		inclusive/exclusive.  This can be used to make an exclusive
		motion inclusive and an inclusive motion exclusive.

							*o_V*
V		When used after an operator, before the motion command: Force
		the operator to work linewise, also when the motion is
		characterwise.

							*o_CTRL-V*
CTRL-V		When used after an operator, before the motion command: Force
		the operator to work blockwise.  This works like Visual block
		mode selection, with the corners defined by the cursor
		position before and after the motion.

==============================================================================
2. Left-right motions					*left-right-motions*

h		or					*h*
<Left>		or					*<Left>*
CTRL-H		or					*CTRL-H* *<BS>*
<BS>			[count] characters to the left.  |exclusive| motion.
			Note: If you prefer <BS> to delete a character, use
			the mapping:
				:map CTRL-V<BS>		X
			(to enter "CTRL-V<BS>" type the CTRL-V key, followed
			by the <BS> key)
			See |:fixdel| if the <BS> key does not do what you
			want.

l		or					*l*
<Right>		or					*<Right>* *<Space>*
<Space>			[count] characters to the right.  |exclusive| motion.

							*0*
0			To the first character of the line.  |exclusive|
			motion.  When moving up or down, stay in same screen
			column (if possible).

							*<Home>* *<kHome>*
<Home>			To the first character of the line.  |exclusive|
			motion.  When moving up or down, stay in same text
			column (if possible).  Works like "1|", which differs
			from "0" when the line starts with a <Tab>.  {not in
			Vi}

							*^*
^			To the first non-blank character of the line.
			|exclusive| motion.

							*$* *<End>* *<kEnd>*
$  or <End>		To the end of the line.  When a count is given also go
			[count - 1] lines downward |inclusive|.
			In Visual mode the cursor goes to just after the last
			character in the line.
			When 'virtualedit' is active, "$" may move the cursor
			back from past the end of the line to the last
			character in the line.

							*g_*
g_			To the last non-blank character of the line and
			[count - 1] lines downward |inclusive|. {not in Vi}

							*g0* *g<Home>*
g0 or g<Home>		When lines wrap ('wrap' on): To the first character of
			the screen line.  |exclusive| motion.  Differs from
			"0" when a line is wider than the screen.
			When lines don't wrap ('wrap' off): To the leftmost
			character of the current line that is on the screen.
			Differs from "0" when the first character of the line
			is not on the screen.  {not in Vi}

							*g^*
g^			When lines wrap ('wrap' on): To the first non-blank
			character of the screen line.  |exclusive| motion.
			Differs from "^" when a line is wider than the screen.
			When lines don't wrap ('wrap' off): To the leftmost
			non-blank character of the current line that is on the
			screen.  Differs from "^" when the first non-blank
			character of the line is not on the screen.  {not in
			Vi}

							*gm*
gm			Like "g0", but half a screenwidth to the right (or as
			much as possible). {not in Vi}

							*g$* *g<End>*
g$ or g<End>		When lines wrap ('wrap' on): To the last character of
			the screen line and [count - 1] screen lines downward
			|inclusive|.  Differs from "$" when a line is wider
			than the screen.
			When lines don't wrap ('wrap' off): To the rightmost
			character of the current line that is visible on the
			screen.  Differs from "$" when the last character of
			the line is not on the screen or when a count is used.
			Additionally, vertical movements keep the column,
			instead of going to the end of the line.
			{not in Vi}

							*bar*
|			To screen column [count] in the current line.
			|exclusive| motion.

							*f*
f{char}			To [count]'th occurrence of {char} to the right.  The
			cursor is placed on {char} |inclusive|.
			{char} can be entered as a digraph |digraph-arg|.
			When 'encoding' is set to Unicode, composing
			characters may be used, see |utf-8-char-arg|.
			|:lmap| mappings apply to {char}.  The CTRL-^ command
			in Insert mode can be used to switch this on/off
			|i_CTRL-^|.

							*F*
F{char}			To the [count]'th occurrence of {char} to the left.
			The cursor is placed on {char} |exclusive|.
			{char} can be entered like with the |f| command.

							*t*
t{char}			Till before [count]'th occurrence of {char} to the
			right.  The cursor is placed on the character left of
			{char} |inclusive|.
			{char} can be entered like with the |f| command.

							*T*
T{char}			Till after [count]'th occurrence of {char} to the
			left.  The cursor is placed on the character right of
			{char} |exclusive|.
			{char} can be entered like with the |f| command.

							*;*
;			Repeat latest f, t, F or T [count] times.

							*,*
,			Repeat latest f, t, F or T in opposite direction
			[count] times.

These commands move the cursor to the specified column in the current line.
They stop at the first column and at the end of the line, except "$", which
may move to one of the next lines.  See 'whichwrap' option to make some of the
commands move across line boundaries.

==============================================================================
3. Up-down motions					*up-down-motions*

k		or					*k*
<Up>		or					*<Up>* *CTRL-P*
CTRL-P			[count] lines upward |linewise|.

j		or					*j*
<Down>		or					*<Down>*
CTRL-J		or					*CTRL-J*
<NL>		or					*<NL>* *CTRL-N*
CTRL-N			[count] lines downward |linewise|.

gk		or					*gk* *g<Up>*
g<Up>			[count] display lines upward.  |exclusive| motion.
			Differs from 'k' when lines wrap, and when used with
			an operator, because it's not linewise.  {not in Vi}

gj		or					*gj* *g<Down>*
g<Down>			[count] display lines downward.  |exclusive| motion.
			Differs from 'j' when lines wrap, and when used with
			an operator, because it's not linewise.  {not in Vi}

							*-*
-  <minus>		[count] lines upward, on the first non-blank
			character |linewise|.

+		or					*+*
CTRL-M		or					*CTRL-M* *<CR>*
<CR>			[count] lines downward, on the first non-blank
			character |linewise|.

							*_*
_  <underscore>		[count] - 1 lines downward, on the first non-blank
			character |linewise|.

							*G*
G			Goto line [count], default last line, on the first
			non-blank character |linewise|.  If 'startofline' not
			set, keep the same column.

							*<C-End>*
<C-End>			Goto line [count], default last line, on the last
			character |inclusive|. {not in Vi}

<C-Home>	or					*gg* *<C-Home>*
gg			Goto line [count], default first line, on the first
			non-blank character |linewise|.  If 'startofline' not
			set, keep the same column.

:[range]		Set the cursor on the specified line number.  If
			there are several numbers, the last one is used.

							*N%*
{count}%		Go to {count} percentage in the file, on the first
			non-blank in the line |linewise|.  To compute the new
			line number this formula is used:
			    ({count} * number-of-lines + 99) / 100
			See also 'startofline' option.  {not in Vi}

:[range]go[to] [count]					*:go* *:goto* *go*
[count]go		Go to {count} byte in the buffer.  Default [count] is
			one, start of the file.  When giving [range], the
			last number in it used as the byte count.  End-of-line
			characters are counted depending on the current
			'fileformat' setting.
			{not in Vi}
			{not available when compiled without the
			|+byte_offset| feature}

These commands move to the specified line.  They stop when reaching the first
or the last line.  The first two commands put the cursor in the same column
(if possible) as it was after the last command that changed the column,
except after the "$" command, then the cursor will be put on the last
character of the line.

If "k", "-" or CTRL-P is used with a [count] and there are less than [count]
lines above the cursor and the 'cpo' option includes the "-" flag it is an
error. |cpo--|.

==============================================================================
4. Word motions						*word-motions*

<S-Right>	or					*<S-Right>* *w*
w			[count] words forward.  |exclusive| motion.

<C-Right>	or					*<C-Right>* *W*
W			[count] WORDS forward.  |exclusive| motion.

							*e*
e			Forward to the end of word [count] |inclusive|.

							*E*
E			Forward to the end of WORD [count] |inclusive|.

<S-Left>	or					*<S-Left>* *b*
b			[count] words backward.  |exclusive| motion.

<C-Left>	or					*<C-Left>* *B*
B			[count] WORDS backward.  |exclusive| motion.

							*ge*
ge			Backward to the end of word [count] |inclusive|.

							*gE*
gE			Backward to the end of WORD [count] |inclusive|.

These commands move over words or WORDS.
							*word*
A word consists of a sequence of letters, digits and underscores, or a
sequence of other non-blank characters, separated with white space (spaces,
tabs, <EOL>).  This can be changed with the 'iskeyword' option.
							*WORD*
A WORD consists of a sequence of non-blank characters, separated with white
space.  An empty line is also considered to be a word and a WORD.

A sequence of folded lines is counted for one word of a single character.
"w" and "W", "e" and "E" move to the start/end of the first word or WORD after
a range of folded lines.  "b" and "B" move to the start of the first word or
WORD before the fold.

Special case: "cw" and "cW" are treated like "ce" and "cE" if the cursor is
on a non-blank.  This is because "cw" is interpreted as change-word, and a
word does not include the following white space.  {Vi: "cw" when on a blank
followed by other blanks changes only the first blank; this is probably a
bug, because "dw" deletes all the blanks}

Another special case: When using the "w" motion in combination with an
operator and the last word moved over is at the end of a line, the end of
that word becomes the end of the operated text, not the first word in the
next line.

The original Vi implementation of "e" is buggy.  For example, the "e" command
will stop on the first character of a line if the previous line was empty.
But when you use "2e" this does not happen.  In Vim "ee" and "2e" are the
same, which is more logical.  However, this causes a small incompatibility
between Vi and Vim.

==============================================================================
5. Text object motions					*object-motions*

							*(*
(			[count] sentences backward.  |exclusive| motion.

							*)*
)			[count] sentences forward.  |exclusive| motion.

							*{*
{			[count] paragraphs backward.  |exclusive| motion.

							*}*
}			[count] paragraphs forward.  |exclusive| motion.

							*]]*
]]			[count] sections forward or to the next '{' in the
			first column.  When used after an operator, then also
			stops below a '}' in the first column.  |exclusive|
			Note that |exclusive-linewise| often applies.

							*][*
][			[count] sections forward or to the next '}' in the
			first column.  |exclusive|
			Note that |exclusive-linewise| often applies.

							*[[*
[[			[count] sections backward or to the previous '{' in
			the first column.  |exclusive|
			Note that |exclusive-linewise| often applies.

							*[]*
[]			[count] sections backward or to the previous '}' in
			the first column.  |exclusive|
			Note that |exclusive-linewise| often applies.

These commands move over three kinds of text objects.

							*sentence*
A sentence is defined as ending at a '.', '!' or '?' followed by either the
end of a line, or by a space or tab.  Any number of closing ')', ']', '"'
and ''' characters may appear after the '.', '!' or '?' before the spaces,
tabs or end of line.  A paragraph and section boundary is also a sentence
boundary.
If the 'J' flag is present in 'cpoptions', at least two spaces have to
follow the punctuation mark; <Tab>s are not recognized as white space.
The definition of a sentence cannot be changed.

							*paragraph*
A paragraph begins after each empty line, and also at each of a set of
paragraph macros, specified by the pairs of characters in the 'paragraphs'
option.  The default is "IPLPPPQPP LIpplpipbp", which corresponds to the
macros ".IP", ".LP", etc.  (These are nroff macros, so the dot must be in the
first column).  A section boundary is also a paragraph boundary.
Note that a blank line (only containing white space) is NOT a paragraph
boundary.
Also note that this does not include a '{' or '}' in the first column.  When
the '{' flag is in 'cpoptions' then '{' in the first column is used as a
paragraph boundary |posix|.

							*section*
A section begins after a form-feed (<C-L>) in the first column and at each of
a set of section macros, specified by the pairs of characters in the
'sections' option.  The default is "SHNHH HUnhsh", which defines a section to
start at the nroff macros ".SH", ".NH", ".H", ".HU", ".nh" and ".sh".

The "]" and "[" commands stop at the '{' or '}' in the first column.  This is
useful to find the start or end of a function in a C program.  Note that the
first character of the command determines the search direction and the
second character the type of brace found.

If your '{' or '}' are not in the first column, and you would like to use "[["
and "]]" anyway, try these mappings: >
   :map [[ ?{<CR>w99[{
   :map ][ /}<CR>b99]}
   :map ]] j0[[%/{<CR>
   :map [] k$][%?}<CR>
[type these literally, see |<>|]

==============================================================================
6. Text object selection			*object-select* *text-objects*
						*v_a* *v_i*

This is a series of commands that can only be used while in Visual mode or
after an operator.  The commands that start with "a" select "a"n object
including white space, the commands starting with "i" select an "inner" object
without white space, or just the white space.  Thus the "inner" commands
always select less text than the "a" commands.

These commands are {not in Vi}.
These commands are not available when the |+textobjects| feature has been
disabled at compile time.
							*v_aw* *aw*
aw			"a word", select [count] words (see |word|).
			Leading or trailing white space is included, but not
			counted.
			When used in Visual linewise mode "aw" switches to
			Visual characterwise mode.

							*v_iw* *iw*
iw			"inner word", select [count] words (see |word|).
			White space between words is counted too.
			When used in Visual linewise mode "iw" switches to
			Visual characterwise mode.

							*v_aW* *aW*
aW			"a WORD", select [count] WORDs (see |WORD|).
			Leading or trailing white space is included, but not
			counted.
			When used in Visual linewise mode "aW" switches to
			Visual characterwise mode.

							*v_iW* *iW*
iW			"inner WORD", select [count] WORDs (see |WORD|).
			White space between words is counted too.
			When used in Visual linewise mode "iW" switches to
			Visual characterwise mode.

							*v_as* *as*
as			"a sentence", select [count] sentences (see
			|sentence|).
			When used in Visual mode it is made characterwise.

							*v_is* *is*
is			"inner sentence", select [count] sentences (see
			|sentence|).
			When used in Visual mode it is made characterwise.

							*v_ap* *ap*
ap			"a paragraph", select [count] paragraphs (see
			|paragraph|).
			Exception: a blank line (only containing white space)
			is also a paragraph boundary.
			When used in Visual mode it is made linewise.

							*v_ip* *ip*
ip			"inner paragraph", select [count] paragraphs (see
			|paragraph|).
			Exception: a blank line (only containing white space)
			is also a paragraph boundary.
			When used in Visual mode it is made linewise.

a]						*v_a]* *v_a[* *a]* *a[*
a[			"a [] block", select [count] '[' ']' blocks.  This
			goes backwards to the [count] unclosed '[', and finds
			the matching ']'.  The enclosed text is selected,
			including the '[' and ']'.
			When used in Visual mode it is made characterwise.

i]						*v_i]* *v_i[* *i]* *i[*
i[			"inner [] block", select [count] '[' ']' blocks.  This
			goes backwards to the [count] unclosed '[', and finds
			the matching ']'.  The enclosed text is selected,
			excluding the '[' and ']'.
			When used in Visual mode it is made characterwise.

a)							*v_a)* *a)* *a(*
a(							*v_ab* *v_a(* *ab*
ab			"a block", select [count] blocks, from "[count] [(" to
			the matching ')', including the '(' and ')' (see
			|[(|).  Does not include white space outside of the
			parenthesis.
			When used in Visual mode it is made characterwise.

i)							*v_i)* *i)* *i(*
i(							*v_ib* *v_i(* *ib*
ib			"inner block", select [count] blocks, from "[count] [("
			to the matching ')', excluding the '(' and ')' (see
			|[(|).
			When used in Visual mode it is made characterwise.

a>						*v_a>* *v_a<* *a>* *a<*
a<			"a <> block", select [count] <> blocks, from the
			[count]'th unmatched '<' backwards to the matching
			'>', including the '<' and '>'.
			When used in Visual mode it is made characterwise.

i>						*v_i>* *v_i<* *i>* *i<*
i<			"inner <> block", select [count] <> blocks, from
			the [count]'th unmatched '<' backwards to the matching
			'>', excluding the '<' and '>'.
			When used in Visual mode it is made characterwise.

						*v_at* *at*
at			"a tag block", select [count] tag blocks, from the
			[count]'th unmatched "<aaa>" backwards to the matching
			"</aaa>", including the "<aaa>" and "</aaa>".
			See |tag-blocks| about the details.
			When used in Visual mode it is made characterwise.

						*v_it* *it*
it			"inner tag block", select [count] tag blocks, from the
			[count]'th unmatched "<aaa>" backwards to the matching
			"</aaa>", excluding the "<aaa>" and "</aaa>".
			See |tag-blocks| about the details.
			When used in Visual mode it is made characterwise.

a}							*v_a}* *a}* *a{*
a{							*v_aB* *v_a{* *aB*
aB			"a Block", select [count] Blocks, from "[count] [{" to
			the matching '}', including the '{' and '}' (see
			|[{|).
			When used in Visual mode it is made characterwise.

i}							*v_i}* *i}* *i{*
i{							*v_iB* *v_i{* *iB*
iB			"inner Block", select [count] Blocks, from "[count] [{"
			to the matching '}', excluding the '{' and '}' (see
			|[{|).
			When used in Visual mode it is made characterwise.

a"							*v_aquote* *aquote*
a'							*v_a'* *a'*
a`							*v_a`* *a`*
			"a quoted string".  Selects the text from the previous
			quote until the next quote.  The 'quoteescape' is used
			to skip escaped quotes.
			When the cursor starts on a quote, Vim will figure out
			which quote pairs form a string by searching from the
			start of the line.
			Any trailing or leading white space is included.
			When used in Visual mode it is made characterwise.
			Repeating this object in Visual mode another string is
			included.  A count is currently not used.

i"							*v_iquote* *iquote*
i'							*v_i'* *i'*
i`							*v_i`* *i`*
			Like a", a' and a`, but exclude the quotes and
			repeating won't extend the Visual selection.
			Special case: With a count of 2 the quotes are
			included, but no extra white space as with a"/a'/a`.

When used after an operator:
For non-block objects:
	For the "a" commands: The operator applies to the object and the white
	space after the object.  If there is no white space after the object
	or when the cursor was in the white space before the object, the white
	space before the object is included.
	For the "inner" commands: If the cursor was on the object, the
	operator applies to the object.  If the cursor was on white space, the
	operator applies to the white space.
For a block object:
	The operator applies to the block where the cursor is in, or the block
	on which the cursor is on one of the braces.  For the "inner" commands
	the surrounding braces are excluded.  For the "a" commands, the braces
	are included.

When used in Visual mode:
When start and end of the Visual area are the same (just after typing "v"):
	One object is selected, the same as for using an operator.
When start and end of the Visual area are not the same:
	For non-block objects the area is extended by one object or the white
	space up to the next object, or both for the "a" objects.  The
	direction in which this happens depends on which side of the Visual
	area the cursor is.  For the block objects the block is extended one
	level outwards.

For illustration, here is a list of delete commands, grouped from small to big
objects.  Note that for a single character and a whole line the existing vi
movement commands are used.
	"dl"	delete character (alias: "x")		|dl|
	"diw"	delete inner word			*diw*
	"daw"	delete a word				*daw*
	"diW"	delete inner WORD (see |WORD|)		*diW*
	"daW"	delete a WORD (see |WORD|)		*daW*
	"dd"	delete one line				|dd|
	"dis"	delete inner sentence			*dis*
	"das"	delete a sentence			*das*
	"dib"	delete inner '(' ')' block		*dib*
	"dab"	delete a '(' ')' block			*dab*
	"dip"	delete inner paragraph			*dip*
	"dap"	delete a paragraph			*dap*
	"diB"	delete inner '{' '}' block		*diB*
	"daB"	delete a '{' '}' block			*daB*

Note the difference between using a movement command and an object.  The
movement command operates from here (cursor position) to where the movement
takes us.  When using an object the whole object is operated upon, no matter
where on the object the cursor is.  For example, compare "dw" and "daw": "dw"
deletes from the cursor position to the start of the next word, "daw" deletes
the word under the cursor and the space after or before it.


Tag blocks						*tag-blocks*

For the "it" and "at" text objects an attempt is done to select blocks between
matching tags for HTML and XML.  But since these are not completely compatible
there are a few restrictions.

The normal method is to select a <tag> until the matching </tag>.  For "at"
the tags are included, for "it" they are excluded.  But when "it" is repeated
the tags will be included (otherwise nothing would change).

"<aaa/>" items are skipped.  Case is ignored, also for XML where case does
matter.

In HTML it is possible to have a tag like <br> or <meta ...> without a
matching end tag.  These are ignored.

The text objects are tolerant about mistakes.  Stray end tags are ignored.

==============================================================================
7. Marks					*mark-motions* *E20* *E78*

Jumping to a mark can be done in two ways:
1. With ` (backtick):	  The cursor is positioned at the specified location
			  and the motion is |exclusive|.
2. With ' (single quote): The cursor is positioned on the first non-blank
			  character in the line of the specified location and
			  the motion is linewise.

						*m* *mark* *Mark*
m{a-zA-Z}		Set mark {a-zA-Z} at cursor position (does not move
			the cursor, this is not a motion command).

						*m'* *m`*
m'  or  m`		Set the previous context mark.  This can be jumped to
			with the "''" or "``" command (does not move the
			cursor, this is not a motion command).

						*m[* *m]*
m[  or  m]		Set the |'[| or |']| mark.  Useful when an operator is
			to be simulated by multiple commands.  (does not move
			the cursor, this is not a motion command).

						*:ma* *:mark* *E191*
:[range]ma[rk] {a-zA-Z'}
			Set mark {a-zA-Z'} at last line number in [range],
			column 0.  Default is cursor line.

						*:k*
:[range]k{a-zA-Z'}	Same as :mark, but the space before the mark name can
			be omitted.

						*'* *'a* *`* *`a*
'{a-z}  `{a-z}		Jump to the mark {a-z}.

						*'A* *'0* *`A* *`0*
'{A-Z0-9}  `{A-Z0-9}	To the mark {A-Z0-9} in the correct file (not a motion
			command when in another file).  {not in Vi}

						*g'* *g'a* *g`* *g`a*
g'{mark}  g`{mark}
			Jump to the {mark}, but don't change the jumplist when
			jumping within the current buffer.  Example: >
				g`"
<			jumps to the last known position in a file.  See
			$VIMRUNTIME/vimrc_example.vim.
			Also see |:keepjumps|.
			{not in Vi}

						*:marks*
:marks			List all the current marks (not a motion command).
			The |'(|, |')|, |'{| and |'}| marks are not listed.
			{not in Vi}
						*E283*
:marks {arg}		List the marks that are mentioned in {arg} (not a
			motion command).  For example: >
				:marks aB
<			to list marks 'a' and 'B'.  {not in Vi}

							*:delm* *:delmarks*
:delm[arks] {marks} 	Delete the specified marks.  Marks that can be deleted
			include A-Z and 0-9.  You cannot delete the ' mark.
			They can be specified by giving the list of mark
			names, or with a range, separated with a dash.  Spaces
			are ignored.  Examples: >
			   :delmarks a	      deletes mark a
			   :delmarks a b 1    deletes marks a, b and 1
			   :delmarks Aa       deletes marks A and a
			   :delmarks p-z      deletes marks in the range p to z
			   :delmarks ^.[]     deletes marks ^ . [ ]
			   :delmarks \"	      deletes mark "
<			{not in Vi}

:delm[arks]!		Delete all marks for the current buffer, but not marks
			A-Z or 0-9.
			{not in Vi}

A mark is not visible in any way.  It is just a position in the file that is
remembered.  Do not confuse marks with named registers, they are totally
unrelated.

'a - 'z		lowercase marks, valid within one file
'A - 'Z		uppercase marks, also called file marks, valid between files
'0 - '9		numbered marks, set from .viminfo file

Lowercase marks 'a to 'z are remembered as long as the file remains in the
buffer list.  If you remove the file from the buffer list, all its marks are
lost.  If you delete a line that contains a mark, that mark is erased.

To delete a mark: Create a new line, position the mark there, delete the line.
E.g.: "o<Esc>mxdd".  This does change the file though.  Using "u" won't work,
it also restores marks.

Lowercase marks can be used in combination with operators.  For example: "d't"
deletes the lines from the cursor position to mark 't'.  Hint: Use mark 't' for
Top, 'b' for Bottom, etc..  Lowercase marks are restored when using undo and
redo.

Uppercase marks 'A to 'Z include the file name.  {Vi: no uppercase marks} You
can use them to jump from file to file.  You can only use an uppercase mark
with an operator if the mark is in the current file.  The line number of the
mark remains correct, even if you insert/delete lines or edit another file for
a moment.  When the 'viminfo' option is not empty, uppercase marks are kept in
the .viminfo file.  See |viminfo-file-marks|.

Numbered marks '0 to '9 are quite different.  They can not be set directly.
They are only present when using a viminfo file |viminfo-file|.  Basically '0
is the location of the cursor when you last exited Vim, '1 the last but one
time, etc.  Use the "r" flag in 'viminfo' to specify files for which no
Numbered mark should be stored.  See |viminfo-file-marks|.


							*'[* *`[*
'[  `[			To the first character of the previously changed
			or yanked text.  {not in Vi}

							*']* *`]*
']  `]			To the last character of the previously changed or
			yanked text.  {not in Vi}

After executing an operator the Cursor is put at the beginning of the text
that was operated upon.  After a put command ("p" or "P") the cursor is
sometimes placed at the first inserted line and sometimes on the last inserted
character.  The four commands above put the cursor at either end.  Example:
After yanking 10 lines you want to go to the last one of them: "10Y']".  After
inserting several lines with the "p" command you want to jump to the lowest
inserted line: "p']".  This also works for text that has been inserted.

Note: After deleting text, the start and end positions are the same, except
when using blockwise Visual mode.  These commands do not work when no change
was made yet in the current file.

							*'<* *`<*
'<  `<			To the first character of the last selected Visual
			area in the current buffer.  {not in Vi}.

							*'>* *`>*
'>  `>			To the last character of the last selected Visual
			area in the current buffer.  {not in Vi}.

							*''* *``*
''  ``			To the position before the latest jump, or where the
			last "m'" or "m`" command was given.  Not set when the
			|:keepjumps| command modifier was used.
			Also see |restore-position|.

							*'quote* *`quote*
'"  `"			To the cursor position when last exiting the current
			buffer.  Defaults to the first character of the first
			line.  See |last-position-jump| for how to use this
			for each opened file.
			Only one position is remembered per buffer, not one
			for each window.  As long as the buffer is visible in
			a window the position won't be changed.
			{not in Vi}.

							*'^* *`^*
'^  `^			To the position where the cursor was the last time
			when Insert mode was stopped.  This is used by the
			|gi| command.  Not set when the |:keepjumps| command
			modifier was used.  {not in Vi}

							*'.* *`.*
'.  `.			To the position where the last change was made.  The
			position is at or near where the change started.
			Sometimes a command is executed as several changes,
			then the position can be near the end of what the
			command changed.  For example when inserting a word,
			the position will be on the last character.
			{not in Vi}

							*'(* *`(*
'(  `(			To the start of the current sentence, like the |(|
			command.  {not in Vi}

							*')* *`)*
')  `)			To the end of the current sentence, like the |)|
			command.  {not in Vi}

							*'{* *`{*
'{  `{			To the start of the current paragraph, like the |{|
			command.  {not in Vi}

							*'}* *`}*
'}  `}			To the end of the current paragraph, like the |}|
			command.  {not in Vi}

These commands are not marks themselves, but jump to a mark:

							*]'*
]'			[count] times to next line with a lowercase mark below
			the cursor, on the first non-blank character in the
			line. {not in Vi}

							*]`*
]`			[count] times to lowercase mark after the cursor. {not
			in Vi}

							*['*
['			[count] times to previous line with a lowercase mark
			before the cursor, on the first non-blank character in
			the line. {not in Vi}

							*[`*
[`			[count] times to lowercase mark before the cursor.
			{not in Vi}


:loc[kmarks] {command}					*:loc* *:lockmarks*
			Execute {command} without adjusting marks.  This is
			useful when changing text in a way that the line count
			will be the same when the change has completed.
			WARNING: When the line count does change, marks below
			the change will keep their line number, thus move to
			another text line.
			These items will not be adjusted for deleted/inserted
			lines:
			- lower case letter marks 'a - 'z
			- upper case letter marks 'A - 'Z
			- numbered marks '0 - '9
			- last insert position '^
			- last change position '.
			- the Visual area '< and '>
			- line numbers in placed signs
			- line numbers in quickfix positions
			- positions in the |jumplist|
			- positions in the |tagstack|
			These items will still be adjusted:
			- previous context mark ''
			- the cursor position
			- the view of a window on a buffer
			- folds
			- diffs

:kee[pmarks] {command}					*:kee* *:keepmarks*
			Currently only has effect for the filter command
			|:range!|:
			- When the number of lines after filtering is equal to
			  or larger than before, all marks are kept at the
			  same line number.
			- When the number of lines decreases, the marks in the
			  lines that disappeared are deleted.
			In any case the marks below the filtered text have
			their line numbers adjusted, thus stick to the text,
			as usual.
			When the 'R' flag is missing from 'cpoptions' this has
			the same effect as using ":keepmarks".

							*:keepj* *:keepjumps*
:keepj[umps] {command}
			Moving around in {command} does not change the |''|,
			|'.| and |'^| marks, the |jumplist| or the
			|changelist|.
			Useful when making a change or inserting text
			automatically and the user doesn't want to go to this
			position.  E.g., when updating a "Last change"
			timestamp in the first line: >

				:let lnum = line(".")
				:keepjumps normal gg
				:call SetLastChange()
				:keepjumps exe "normal " . lnum . "G"
<
			Note that ":keepjumps" must be used for every command.
			When invoking a function the commands in that function
			can still change the jumplist.  Also, for 
			":keepjumps exe 'command '" the "command" won't keep
			jumps.  Instead use: ":exe 'keepjumps command'"

==============================================================================
8. Jumps					*jump-motions*

A "jump" is one of the following commands: "'", "`", "G", "/", "?", "n",
"N", "%", "(", ")", "[[", "]]", "{", "}", ":s", ":tag", "L", "M", "H" and
the commands that start editing a new file.  If you make the cursor "jump"
with one of these commands, the position of the cursor before the jump is
remembered.  You can return to that position with the "''" and "``" command,
unless the line containing that position was changed or deleted.

							*CTRL-O*
CTRL-O			Go to [count] Older cursor position in jump list
			(not a motion command).  {not in Vi}
			{not available without the +jumplist feature}

<Tab>		or					*CTRL-I* *<Tab>*
CTRL-I			Go to [count] newer cursor position in jump list
			(not a motion command).
			In a |quickfix-window| it takes you to the position of
			the error under the cursor.
			{not in Vi}
			{not available without the +jumplist feature}

							*:ju* *:jumps*
:ju[mps]		Print the jump list (not a motion command).  {not in
			Vi} {not available without the +jumplist feature}

							*jumplist*
Jumps are remembered in a jump list.  With the CTRL-O and CTRL-I command you
can go to cursor positions before older jumps, and back again.  Thus you can
move up and down the list.  There is a separate jump list for each window.
The maximum number of entries is fixed at 100.
{not available without the +jumplist feature}

For example, after three jump commands you have this jump list:

  jump line  col file/line ~
    3	  1    0 some text ~
    2	 70    0 another line ~
    1  1154   23 end. ~
 > ~

The "file/line" column shows the file name, or the text at the jump if it is
in the current file (an indent is removed and a long line is truncated to fit
in the window).

You are currently in line 1167.  If you then use the CTRL-O command, the
cursor is put in line 1154.  This results in:

  jump line  col file/line ~
    2	  1    0 some text ~
    1	 70    0 another line ~
 >  0  1154   23 end. ~
    1  1167    0 foo bar ~

The pointer will be set at the last used jump position.  The next CTRL-O
command will use the entry above it, the next CTRL-I command will use the
entry below it.  If the pointer is below the last entry, this indicates that
you did not use a CTRL-I or CTRL-O before.  In this case the CTRL-O command
will cause the cursor position to be added to the jump list, so you can get
back to the position before the CTRL-O.  In this case this is line 1167.

With more CTRL-O commands you will go to lines 70 and 1.  If you use CTRL-I
you can go back to 1154 and 1167 again.  Note that the number in the "jump"
column indicates the count for the CTRL-O or CTRL-I command that takes you to
this position.

If you use a jump command, the current line number is inserted at the end of
the jump list.  If the same line was already in the jump list, it is removed.
The result is that when repeating CTRL-O you will get back to old positions
only once.

When the |:keepjumps| command modifier is used, jumps are not stored in the
jumplist.

After the CTRL-O command that got you into line 1154 you could give another
jump command (e.g., "G").  The jump list would then become:

  jump line  col file/line ~
    4	  1    0 some text ~
    3	 70    0 another line ~
    2  1167    0 foo bar ~
    1  1154   23 end. ~
 > ~

The line numbers will be adjusted for deleted and inserted lines.  This fails
if you stop editing a file without writing, like with ":n!".

When you split a window, the jumplist will be copied to the new window.

If you have included the ' item in the 'viminfo' option the jumplist will be
stored in the viminfo file and restored when starting Vim.


CHANGE LIST JUMPS			*changelist* *change-list-jumps* *E664*

When making a change the cursor position is remembered.  One position is
remembered for every change that can be undone, unless it is close to a
previous change.  Two commands can be used to jump to positions of changes,
also those that have been undone:

							*g;* *E662*
g;			Go to [count] older position in change list.
			If [count] is larger than the number of older change
			positions go to the oldest change.
			If there is no older change an error message is given.
			(not a motion command)
			{not in Vi}
			{not available without the +jumplist feature}

							*g,* *E663*
g,			Go to [count] newer cursor position in change list.
			Just like |g;| but in the opposite direction.
			(not a motion command)
			{not in Vi}
			{not available without the +jumplist feature}

When using a count you jump as far back or forward as possible.  Thus you can
use "999g;" to go to the first change for which the position is still
remembered.  The number of entries in the change list is fixed and is the same
as for the |jumplist|.

When two undo-able changes are in the same line and at a column position less
than 'textwidth' apart only the last one is remembered.  This avoids that a
sequence of small changes in a line, for example "xxxxx", adds many positions
to the change list.  When 'textwidth' is zero 'wrapmargin' is used.  When that
also isn't set a fixed number of 79 is used.  Detail: For the computations
bytes are used, not characters, to avoid a speed penalty (this only matters
for multi-byte encodings).

Note that when text has been inserted or deleted the cursor position might be
a bit different from the position of the change.  Especially when lines have
been deleted.

When the |:keepjumps| command modifier is used the position of a change is not
remembered.

							*:changes*
:changes		Print the change list.  A ">" character indicates the
			current position.  Just after a change it is below the
			newest entry, indicating that "g;" takes you to the
			newest entry position.  The first column indicates the
			count needed to take you to this position.  Example:

				change line  col text ~
				    3     9    8 bla bla bla
				    2    11   57 foo is a bar
				    1    14   54 the latest changed line
				>

			The "3g;" command takes you to line 9.  Then the
			output of ":changes is:

				change line  col text ~
				>   0     9    8 bla bla bla
				    1    11   57 foo is a bar
				    2    14   54 the latest changed line

			Now you can use "g," to go to line 11 and "2g," to go
			to line 14.

==============================================================================
9. Various motions				*various-motions*

							*%*
%			Find the next item in this line after or under the
			cursor and jump to its match. |inclusive| motion.
			Items can be:
			([{}])		parenthesis or (curly/square) brackets
					(this can be changed with the
					'matchpairs' option)
			/* */		start or end of C-style comment
			#if, #ifdef, #else, #elif, #endif
					C preprocessor conditionals (when the
					cursor is on the # or no ([{
					following)
			For other items the matchit plugin can be used, see
			|matchit-install|.

			When 'cpoptions' contains "M" |cpo-M| backslashes
			before parens and braces are ignored.  Without "M" the
			number of backslashes matters: an even number doesn't
			match with an odd number.  Thus in "( \) )" and "\( (
			\)" the first and last parenthesis match.
			When the '%' character is not present in 'cpoptions'
			|cpo-%|, parens and braces inside double quotes are
			ignored, unless the number of parens/braces in a line
			is uneven and this line and the previous one does not
			end in a backslash.  '(', '{', '[', ']', '}' and ')'
			are also ignored (parens and braces inside single
			quotes).  Note that this works fine for C, but not for
			Perl, where single quotes are used for strings.
			No count is allowed ({count}% jumps to a line {count}
			percentage down the file |N%|).  Using '%' on
			#if/#else/#endif makes the movement linewise.

						*[(*
[(			go to [count] previous unmatched '('.
			|exclusive| motion. {not in Vi}

						*[{*
[{			go to [count] previous unmatched '{'.
			|exclusive| motion. {not in Vi}

						*])*
])			go to [count] next unmatched ')'.
			|exclusive| motion. {not in Vi}

						*]}*
]}			go to [count] next unmatched '}'.
			|exclusive| motion. {not in Vi}

The above four commands can be used to go to the start or end of the current
code block.  It is like doing "%" on the '(', ')', '{' or '}' at the other
end of the code block, but you can do this from anywhere in the code block.
Very useful for C programs.  Example: When standing on "case x:", "[{" will
bring you back to the switch statement.

						*]m*
]m			Go to [count] next start of a method (for Java or
			similar structured language).  When not before the
			start of a method, jump to the start or end of the
			class.  When no '{' is found after the cursor, this is
			an error.  |exclusive| motion. {not in Vi}
						*]M*
]M			Go to [count] next end of a method (for Java or
			similar structured language).  When not before the end
			of a method, jump to the start or end of the class.
			When no '}' is found after the cursor, this is an
			error. |exclusive| motion. {not in Vi}
						*[m*
[m			Go to [count] previous start of a method (for Java or
			similar structured language).  When not after the
			start of a method, jump to the start or end of the
			class.  When no '{' is found before the cursor this is
			an error. |exclusive| motion. {not in Vi}
						*[M*
[M			Go to [count] previous end of a method (for Java or
			similar structured language).  When not after the
			end of a method, jump to the start or end of the
			class.  When no '}' is found before the cursor this is
			an error. |exclusive| motion. {not in Vi}

The above two commands assume that the file contains a class with methods.
The class definition is surrounded in '{' and '}'.  Each method in the class
is also surrounded with '{' and '}'.  This applies to the Java language.  The
file looks like this: >

	// comment
	class foo {
		int method_one() {
			body_one();
		}
		int method_two() {
			body_two();
		}
	}
Starting with the cursor on "body_two()", using "[m" will jump to the '{' at
the start of "method_two()" (obviously this is much more useful when the
method is long!).  Using "2[m" will jump to the start of "method_one()".
Using "3[m" will jump to the start of the class.

						*[#*
[#			go to [count] previous unmatched "#if" or "#else".
			|exclusive| motion. {not in Vi}

						*]#*
]#			go to [count] next unmatched "#else" or "#endif".
			|exclusive| motion. {not in Vi}

These two commands work in C programs that contain #if/#else/#endif
constructs.  It brings you to the start or end of the #if/#else/#endif where
the current line is included.  You can then use "%" to go to the matching line.

						*[star* *[/*
[*  or  [/		go to [count] previous start of a C comment "/*".
			|exclusive| motion. {not in Vi}

						*]star* *]/*
]*  or  ]/		go to [count] next end of a C comment "*/".
			|exclusive| motion. {not in Vi}


						*H*
H			To line [count] from top (Home) of window (default:
			first line on the window) on the first non-blank
			character |linewise|.  See also 'startofline' option.
			Cursor is adjusted for 'scrolloff' option.

						*M*
M			To Middle line of window, on the first non-blank
			character |linewise|.  See also 'startofline' option.

						*L*
L			To line [count] from bottom of window (default: Last
			line on the window) on the first non-blank character
			|linewise|.  See also 'startofline' option.
			Cursor is adjusted for 'scrolloff' option.

<LeftMouse>		Moves to the position on the screen where the mouse
			click is |exclusive|.  See also |<LeftMouse>|.  If the
			position is in a status line, that window is made the
			active window and the cursor is not moved.  {not in Vi}

 vim:tw=78:ts=8:ft=help:norl:
